--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- From: Chris Rhodin <chris@notav8.com>
- Date: Sun, 31 Jul 2016 00:16:14 -0700
- Message-id: <20160731071614.13615.81977.reportbug@proliant.robinstreet>
Subject: linux-image-3.16.0-4-amd64: Keyspan USB serial adapter USA-49WLC failed to load firmware
Package: src:linux
Version: 3.16.7-ckt25-2+deb8u3
Severity: normal
Tags: upstream
Dear Maintainer,
The Keyspan USB serial adapter USA-49WLC fails to load firmware and will not work. This device is based on an older generation
Cypress EZ-USB FX (CY7C64613-80NC). The firmware fails to load when the device is attached. While searching for an answer I found
the problem may stem from a non-standard implementation of the firmware loading commands. Earlier versions of the kernel
(pre-Wheezy) did work with this device. I have tried but have been unable to locate the change in the USB code taht causes this
failure.
-- Package-specific info:
** Version:
Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt25-2+deb8u3 (2016-07-02)
** Command line:
BOOT_IMAGE=/vmlinuz-3.16.0-4-amd64 root=ZFS=proliant/root ro boot=zfs quiet
** Tainted: PO (4097)
* Proprietary module has been loaded.
* Out-of-tree module has been loaded.
** Kernel log:
[ 16.574336] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[ 16.574337] [drm] Encoders:
[ 16.574339] [drm] DFP2: INTERNAL_UNIPHY
[ 16.574340] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 16.574341] [drm] Connector 2:
[ 16.574342] [drm] VGA-1
[ 16.574344] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 16.574345] [drm] Encoders:
[ 16.574346] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 16.638855] [drm] fb mappable at 0xD045E000
[ 16.638857] [drm] vram apper at 0xD0000000
[ 16.638859] [drm] size 14745600
[ 16.638860] [drm] fb depth is 24
[ 16.638861] [drm] pitch is 10240
[ 16.638943] fbcon: radeondrmfb (fb0) is primary device
[ 16.727125] Console: switching to colour frame buffer device 320x90
[ 16.738343] radeon 0000:13:00.0: fb0: radeondrmfb frame buffer device
[ 16.738345] radeon 0000:13:00.0: registered panic notifier
[ 16.752658] [drm] Initialized radeon 2.39.0 20080528 for 0000:13:00.0 on minor 0
[ 17.852049] floppy0: no floppy controllers found
[ 19.871023] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 19.912638] systemd-journald[1444]: Received request to flush runtime journal from PID 1
[ 20.766563] RPC: Registered named UNIX socket transport module.
[ 20.766568] RPC: Registered udp transport module.
[ 20.766570] RPC: Registered tcp transport module.
[ 20.766571] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 20.793952] FS-Cache: Loaded
[ 20.848920] FS-Cache: Netfs 'nfs' registered for caching
[ 20.907617] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 22.126082] Adding 16777212k swap on /dev/zd0. Priority:-1 extents:1 across:16777212k SSFS
[ 22.832872] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 22.832908] NFSD: starting 90-second grace period (net ffffffff818ba200)
[ 23.072027] vboxdrv: Found 8 processor cores
[ 23.072625] vboxdrv: fAsync=0 offMin=0x697 offMax=0xd969
[ 23.172815] vboxdrv: TSC mode is Synchronous, tentative frequency 2333416072 Hz
[ 23.172818] vboxdrv: Successfully loaded version 5.0.26 (interface 0x00240000)
[ 23.557556] VBoxNetFlt: Successfully started.
[ 23.579074] VBoxNetAdp: Successfully started.
[ 23.931524] VBoxPciLinuxInit
[ 24.112241] vboxpci: IOMMU not found (not registered)
[ 24.213785] cfg80211: Calling CRDA to update world regulatory domain
[ 24.558366] cfg80211: World regulatory domain updated:
[ 24.558371] cfg80211: DFS Master region: unset
[ 24.558373] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 24.558376] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 24.558378] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 24.558380] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 24.558382] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 24.558385] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 24.558387] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 24.558389] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 24.558391] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 24.682759] bnx2 0000:03:00.0: firmware: direct-loading firmware bnx2/bnx2-mips-06-6.2.3.fw
[ 24.685499] bnx2 0000:03:00.0: firmware: direct-loading firmware bnx2/bnx2-rv2p-06-6.0.15.fw
[ 24.685547] bnx2 0000:03:00.0: irq 70 for MSI/MSI-X
[ 24.816026] bnx2 0000:03:00.0 eth0: using MSI
[ 24.816087] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 24.818106] bnx2 0000:05:00.0: irq 71 for MSI/MSI-X
[ 24.948022] bnx2 0000:05:00.0 eth1: using MSI
[ 24.948114] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 27.917830] bnx2 0000:03:00.0 eth0: NIC Copper Link is Up, 1000 Mbps full duplex
[ 27.917847] , receive & transmit flow control ON
[ 27.917928] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 28.085667] bnx2 0000:05:00.0 eth1: NIC Copper Link is Up, 1000 Mbps full duplex
[ 28.085684] , receive & transmit flow control ON
[ 28.085764] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 73.976281] Bluetooth: Core ver 2.19
[ 73.976310] NET: Registered protocol family 31
[ 73.976312] Bluetooth: HCI device and connection manager initialized
[ 73.976321] Bluetooth: HCI socket layer initialized
[ 73.976324] Bluetooth: L2CAP socket layer initialized
[ 73.976338] Bluetooth: SCO socket layer initialized
[ 74.151432] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 74.151438] Bluetooth: BNEP filters: protocol multicast
[ 74.151448] Bluetooth: BNEP socket layer initialized
[ 2945.312023] usb 1-4.1: new full-speed USB device number 8 using ehci-pci
[ 2945.404633] usb 1-4.1: New USB device found, idVendor=06cd, idProduct=011a
[ 2945.404640] usb 1-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2946.453473] usbcore: registered new interface driver usbserial
[ 2946.453498] usbcore: registered new interface driver usbserial_generic
[ 2946.453517] usbserial: USB Serial support registered for generic
[ 2946.455853] usbcore: registered new interface driver keyspan
[ 2946.455877] usbserial: USB Serial support registered for Keyspan - (without firmware)
[ 2946.455894] usbserial: USB Serial support registered for Keyspan 1 port adapter
[ 2946.455918] usbserial: USB Serial support registered for Keyspan 2 port adapter
[ 2946.455935] usbserial: USB Serial support registered for Keyspan 4 port adapter
[ 2946.455966] keyspan 1-4.1:1.0: Keyspan - (without firmware) converter detected
[ 2946.462464] usb 1-4.1: firmware: direct-loading firmware keyspan/usa49wlc.fw
[ 2949.460265] usb 1-4.1: ezusb_ihex_firmware_download - ezusb_writememory failed writing internal memory (-110 7F92 ffffc900137e4006 1)
[ 2949.460277] usb 1-4.1: failed to load firmware "keyspan/usa49wlc.fw"
[ 2949.460306] keyspan: probe of 1-4.1:1.0 failed with error -5
[ 3142.080050] usb 1-4.1: USB disconnect, device number 8
[ 3156.172022] usb 1-4.1: new full-speed USB device number 9 using ehci-pci
[ 3156.264674] usb 1-4.1: New USB device found, idVendor=06cd, idProduct=011a
[ 3156.264680] usb 1-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3156.265149] keyspan 1-4.1:1.0: Keyspan - (without firmware) converter detected
[ 3156.265230] usb 1-4.1: firmware: direct-loading firmware keyspan/usa49wlc.fw
[ 3159.264308] usb 1-4.1: ezusb_ihex_firmware_download - ezusb_writememory failed writing internal memory (-110 7F92 ffffc900137e4006 1)
[ 3159.264320] usb 1-4.1: failed to load firmware "keyspan/usa49wlc.fw"
[ 3159.264334] keyspan: probe of 1-4.1:1.0 failed with error -5
** Model information
sys_vendor: HP
product_name: ProLiant DL360 G5
product_version:
chassis_vendor: HP
chassis_version:
bios_vendor: HP
bios_version: P58
** Loaded modules:
keyspan
ezusb
usbserial
bnep
bluetooth
6lowpan_iphc
cfg80211
pci_stub
rfkill
binfmt_misc
vboxpci(O)
vboxnetadp(O)
vboxnetflt(O)
vboxdrv(O)
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
fscache
sunrpc
ext4
crc16
mbcache
jbd2
coretemp
snd_ice1724
snd_ak4113
snd_pt2258
snd_ak4114
snd_i2c
snd_ice17xx_ak4xxx
snd_ak4xxx_adda
snd_rawmidi
iTCO_wdt
evdev
iTCO_vendor_support
kvm_intel
snd_seq_device
snd_hda_codec_hdmi
radeon
snd_hda_intel
snd_hda_controller
snd_hda_codec
i5000_edac
snd_ac97_codec
ac97_bus
serio_raw
edac_core
pcspkr
snd_hwdep
snd_pcm
ttm
drm_kms_helper
snd_timer
snd
soundcore
kvm
hpilo
drm
i2c_algo_bit
i2c_core
hpwdt
i5k_amb
lpc_ich
mfd_core
shpchp
ipmi_si
button
processor
ipmi_msghandler
rng_core
fuse
autofs4
zfs(PO)
zunicode(PO)
zcommon(PO)
znvpair(PO)
spl(O)
zavl(PO)
sd_mod
crc_t10dif
crct10dif_generic
crct10dif_common
hid_generic
usbhid
hid
usb_storage
sg
sr_mod
cdrom
hpsa
ata_generic
psmouse
ata_piix
uhci_hcd
ehci_pci
ehci_hcd
libata
usbcore
usb_common
cciss
bnx2
scsi_mod
thermal
thermal_sys
** Network interface configuration:
source /etc/network/interfaces.d/*
auto lo
iface lo inet loopback
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether 00:1f:29:0b:62:98 brd ff:ff:ff:ff:ff:ff
inet 10.0.0.124/24 brd 10.0.0.255 scope global dynamic eth0
valid_lft 82997sec preferred_lft 82997sec
inet6 fe80::21f:29ff:fe0b:6298/64 scope link
valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether 00:1f:29:0b:62:9a brd ff:ff:ff:ff:ff:ff
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
eth0: 90820219 150501 0 0 0 0 0 5 10316386 96220 0 0 0 0 0 0
eth1: 92438 981 0 0 0 0 0 8 21504 336 0 0 0 0 0 0
lo: 4900 90 0 0 0 0 0 0 4900 90 0 0 0 0 0 0
*** Protocol statistics:
Ip:
139372 total packets received
2 with invalid addresses
0 forwarded
0 incoming packets discarded
139370 incoming packets delivered
93149 requests sent out
223 fragments received ok
631 fragments created
Icmp:
67 ICMP messages received
7 input ICMP message failed.
ICMP input histogram:
destination unreachable: 66
echo requests: 1
7 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 6
echo replies: 1
IcmpMsg:
InType3: 66
InType8: 1
OutType0: 1
OutType3: 6
Tcp:
1380 active connections openings
0 passive connection openings
48 failed connection attempts
285 connection resets received
4 connections established
135728 segments received
91942 segments send out
90 segments retransmited
45 bad segments received.
396 resets sent
Udp:
3702 packets received
6 packets to unknown port received.
0 packet receive errors
3216 packets sent
UdpLite:
TcpExt:
413 TCP sockets finished time wait in fast timer
1141 delayed acks sent
Quick ack mode was activated 378 times
1 packets directly queued to recvmsg prequeue.
294 bytes directly received in process context from prequeue
103112 packet headers predicted
1 packets header predicted and directly queued to user
7341 acknowledgments not containing data payload received
2319 predicted acknowledgments
1 times recovered from packet loss due to fast retransmit
32 times recovered from packet loss by selective acknowledgements
Detected reordering 8 times using time stamp
22 congestion windows fully recovered without slow start
9 congestion windows partially recovered using Hoe heuristic
1 congestion windows recovered without slow start by DSACK
1 congestion windows recovered without slow start after partial ack
36 fast retransmits
8 forward retransmits
7 other TCP timeouts
TCPLossProbes: 9
TCPLossProbeRecovery: 4
378 DSACKs sent for old packets
42 DSACKs received
70 connections reset due to unexpected data
175 connections reset due to early user close
3 connections aborted due to timeout
TCPDSACKIgnoredNoUndo: 15
TCPSackShiftFallback: 313
TCPRcvCoalesce: 43200
TCPOFOQueue: 10254
TCPChallengeACK: 45
TCPSYNChallenge: 45
TCPAutoCorking: 926
TCPFromZeroWindowAdv: 5
TCPToZeroWindowAdv: 5
TCPWantZeroWindowAdv: 15
TCPSynRetrans: 37
TCPOrigDataSent: 10691
IpExt:
InMcastPkts: 197
OutMcastPkts: 531
InBcastPkts: 504
OutBcastPkts: 59
InOctets: 87574436
OutOctets: 8417507
InMcastOctets: 15628
OutMcastOctets: 81932
InBcastOctets: 81572
OutBcastOctets: 6368
InNoECTPkts: 150255
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 5000P Chipset Memory Controller Hub [8086:25d8] (rev b1)
Subsystem: Hewlett-Packard Company Device [103c:31fd]
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:02.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x4 Port 2 [8086:25e2] (rev b1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=09, subordinate=12, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: fde00000-fdefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:03.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x4 Port 3 [8086:25e3] (rev b1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=06, subordinate=08, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: fdc00000-fddfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:04.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x8 Port 4-5 [8086:25f8] (rev b1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=13, subordinate=15, sec-latency=0
I/O behind bridge: 00006000-00006fff
Memory behind bridge: fdf00000-fdffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:05.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x4 Port 5 [8086:25e5] (rev b1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=16, subordinate=16, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:06.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x4 Port 6 [8086:25e6] (rev b1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
Memory behind bridge: f8000000-f9ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:07.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x4 Port 7 [8086:25e7] (rev b1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=05, sec-latency=0
Memory behind bridge: fa000000-fbffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:10.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset FSB Registers [8086:25f0] (rev b1)
Subsystem: Hewlett-Packard Company ProLiant DL140 G3 [103c:31fd]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: i5000_edac
00:10.1 Host bridge [0600]: Intel Corporation 5000 Series Chipset FSB Registers [8086:25f0] (rev b1)
Subsystem: Hewlett-Packard Company ProLiant DL140 G3 [103c:31fd]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:10.2 Host bridge [0600]: Intel Corporation 5000 Series Chipset FSB Registers [8086:25f0] (rev b1)
Subsystem: Hewlett-Packard Company ProLiant DL140 G3 [103c:31fd]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:11.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset Reserved Registers [8086:25f1] (rev b1)
Subsystem: Hewlett-Packard Company ProLiant DL140 G3 [103c:31fd]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:13.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset Reserved Registers [8086:25f3] (rev b1)
Subsystem: Hewlett-Packard Company ProLiant DL140 G3 [103c:31fd]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:15.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset FBD Registers [8086:25f5] (rev b1)
Subsystem: Hewlett-Packard Company ProLiant DL140 G3 [103c:31fd]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:16.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset FBD Registers [8086:25f6] (rev b1)
Subsystem: Hewlett-Packard Company ProLiant DL140 G3 [103c:31fd]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:1d.0 USB controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #1 [8086:2688] (rev 09) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company ProLiant DL140 G3 [103c:31fe]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 1000 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #2 [8086:2689] (rev 09) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company ProLiant DL140 G3 [103c:31fe]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 1020 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #3 [8086:268a] (rev 09) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company ProLiant DL140 G3 [103c:31fe]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 1040 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #4 [8086:268b] (rev 09) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:31fe]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 4: I/O ports at 1060 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset EHCI USB2 Controller [8086:268c] (rev 09) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company ProLiant DL140 G3 [103c:31fe]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7df0000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev d9) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 00002000-00003fff
Memory behind bridge: f7e00000-f7ffffff
Prefetchable memory behind bridge: 00000000c8000000-00000000cfffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 631xESB/632xESB/3100 Chipset LPC Interface Controller [8086:2670] (rev 09)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel driver in use: lpc_ich
00:1f.1 IDE interface [0101]: Intel Corporation 631xESB/632xESB IDE Controller [8086:269e] (rev 09) (prog-if 8a [Master SecP PriP])
Subsystem: Hewlett-Packard Company ProLiant DL140 G3 [103c:31fe]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374
Region 4: I/O ports at 0500 [size=16]
Kernel driver in use: ata_piix
01:04.0 System peripheral [0880]: Compaq Computer Corporation Integrated Lights Out Controller [0e11:b203] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:3305]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at 2800 [size=256]
Region 1: Memory at f7fe0000 (32-bit, non-prefetchable) [size=512]
Capabilities: <access denied>
Kernel driver in use: hpwdt
01:04.2 System peripheral [0880]: Compaq Computer Corporation Integrated Lights Out Processor [0e11:b204] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:3305]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 22
BIST result: 00
Region 0: I/O ports at 3400 [size=256]
Region 1: Memory at f7fd0000 (32-bit, non-prefetchable) [size=2K]
Region 2: Memory at f7fc0000 (32-bit, non-prefetchable) [size=16K]
Region 3: Memory at f7f00000 (32-bit, non-prefetchable) [size=512K]
[virtual] Expansion ROM at f7e00000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: hpilo
01:04.4 USB controller [0c03]: Hewlett-Packard Company Integrated Lights-Out Standard Virtual USB Controller [103c:3300] (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company iLO2 [103c:3305]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin B routed to IRQ 22
Region 4: I/O ports at 3800 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
01:04.6 IPMI SMIC interface [0c07]: Hewlett-Packard Company Integrated Lights-Out Standard KCS Interface [103c:3302] (prog-if 01)
Subsystem: Hewlett-Packard Company iLO2 [103c:3305]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 21
Region 0: Memory at f7ef0000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ipmi_si
02:00.0 PCI bridge [0604]: Broadcom EPB PCI-Express to PCI-X Bridge [1166:0103] (rev c3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=02, secondary=03, subordinate=03, sec-latency=64
Memory behind bridge: f8000000-f9ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
03:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet [14e4:164c] (rev 12)
Subsystem: Hewlett-Packard Company NC373i Integrated Multifunction Gigabit Server Adapter [103c:7038]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (16000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 70
Region 0: Memory at f8000000 (64-bit, non-prefetchable) [size=32M]
Capabilities: <access denied>
Kernel driver in use: bnx2
04:00.0 PCI bridge [0604]: Broadcom EPB PCI-Express to PCI-X Bridge [1166:0103] (rev c3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=04, secondary=05, subordinate=05, sec-latency=64
Memory behind bridge: fa000000-fbffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
05:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet [14e4:164c] (rev 12)
Subsystem: Hewlett-Packard Company NC373i Integrated Multifunction Gigabit Server Adapter [103c:7038]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (16000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 71
Region 0: Memory at fa000000 (64-bit, non-prefetchable) [size=32M]
Capabilities: <access denied>
Kernel driver in use: bnx2
06:00.0 RAID bus controller [0104]: Hewlett-Packard Company Smart Array Controller [103c:3230] (rev 04)
Subsystem: Hewlett-Packard Company P400i SAS Controller [103c:3235]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fdd00000 (64-bit, non-prefetchable) [size=1M]
Region 2: I/O ports at 4000 [size=256]
Region 3: Memory at fdcf0000 (64-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at fdc00000 [disabled] [size=256K]
Capabilities: <access denied>
Kernel driver in use: cciss
09:00.0 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express Upstream Port [8086:3500] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=09, secondary=0a, subordinate=0f, sec-latency=0
I/O behind bridge: 00005000-00005fff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
09:00.3 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express to PCI-X Bridge [8086:350c] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=09, secondary=10, subordinate=12, sec-latency=64
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
0a:00.0 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E1 [8086:3510] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=0a, secondary=0b, subordinate=0d, sec-latency=0
I/O behind bridge: 00005000-00005fff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
0a:01.0 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E2 [8086:3514] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=0a, secondary=0e, subordinate=0e, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
0a:02.0 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E3 [8086:3518] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=0a, secondary=0f, subordinate=0f, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
0b:00.0 PCI bridge [0604]: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge [1b21:1080] (rev 01) (prog-if 00 [Normal decode])
Physical Slot: 1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=0b, secondary=0c, subordinate=0c, sec-latency=64
I/O behind bridge: 00005000-00005fff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
0c:00.0 Multimedia audio controller [0401]: VIA Technologies Inc. VT1720/24 [Envy24PT/HT] PCI Multi-Channel Audio Controller [1412:1724] (rev 01)
Subsystem: VIA Technologies Inc. Device [1412:2403]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 5000 [size=32]
Region 1: I/O ports at 5080 [size=128]
Capabilities: <access denied>
Kernel driver in use: snd_ice1724
13:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Cedar [Radeon HD 5000/6000/7350/8350 Series] [1002:68f9] (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:0471]
Physical Slot: 2
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 69
Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at fdfe0000 (64-bit, non-prefetchable) [size=128K]
Region 4: I/O ports at 6000 [size=256]
[virtual] Expansion ROM at fdf00000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
13:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Cedar HDMI Audio [Radeon HD 5400/6300 Series] [1002:aa68]
Subsystem: ASUSTeK Computer Inc. Device [1043:aa68]
Physical Slot: 2
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 68
Region 0: Memory at fdfd0000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
** USB devices:
Bus 006 Device 002: ID 03f0:1027 Hewlett-Packard Virtual keyboard and mouse
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 009: ID 06cd:011a Keyspan USA-49Wlc serial adapter [no firmware]
Bus 001 Device 004: ID 1a40:0201 Terminus Technology Inc. FE 2.1 7-port Hub
Bus 001 Device 007: ID 0430:00a2 Sun Microsystems, Inc. Type 7 Keyboard
Bus 001 Device 006: ID 0566:4006 Monterey International Corp.
Bus 001 Device 005: ID 0430:100e Sun Microsystems, Inc. 24.1" LCD Monitor v4 / FID-638 Mouse
Bus 001 Device 003: ID 1a40:0201 Terminus Technology Inc. FE 2.1 7-port Hub
Bus 001 Device 002: ID 13fe:1f00 Kingston Technology Company Inc. DataTraveler 2.0 4GB Flash Drive / Patriot Xporter 32GB (PEF32GUSB) Flash Drive
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: 8.5
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.16.0-4-amd64 (SMP w/8 CPU cores)
Locale: LANG=C.UTF-8, LC_CTYPE=C.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-3.16.0-4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.56
ii initramfs-tools [linux-initramfs-tool] 0.120+deb8u2
ii kmod 18-3
ii linux-base 3.5
Versions of packages linux-image-3.16.0-4-amd64 recommends:
pn firmware-linux-free <none>
pn irqbalance <none>
Versions of packages linux-image-3.16.0-4-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02-beta2.9-ZOL11-7aa9f6
pn linux-doc-3.16 <none>
Versions of packages linux-image-3.16.0-4-amd64 is related to:
pn firmware-atheros <none>
ii firmware-bnx2 0.43
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
ii firmware-linux-nonfree 0.43
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.16.0-4-amd64/postinst/mips-initrd-3.16.0-4-amd64:
linux-image-3.16.0-4-amd64/postinst/depmod-error-initrd-3.16.0-4-amd64: false
linux-image-3.16.0-4-amd64/prerm/removing-running-kernel-3.16.0-4-amd64: true
--- End Message ---