Bug#1076646: marked as done (linux-image-6.9.8-amd64: Errors reported with initializing amdgpu that works with older kernel)

To: Ingo <Ingo@Hoeft-online.de>
Subject: Bug#1076646: marked as done (linux-image-6.9.8-amd64: Errors reported with initializing amdgpu that works with older kernel)
From: "Debian Bug Tracking System" <owner@bugs.debian.org>
Date: Sun, 21 Jul 2024 19:54:03 +0000
Message-id: <[🔎] handler.1076646.D1076646.17215914893008942.ackdone@bugs.debian.org>
Reply-to: 1076646@bugs.debian.org
References: <5058cabd-1e12-4b7e-a59d-8a23634fde84@Hoeft-online.de> <[🔎] e6c6af48-8bb4-4f35-96fb-92f266fd162a@Hoeft-online.de>

Your message dated Sun, 21 Jul 2024 21:51:14 +0200
with message-id <5058cabd-1e12-4b7e-a59d-8a23634fde84@Hoeft-online.de>
and subject line linux-image-6.9.8-amd64: Errors reported with initializing amdgpu that works with older kernel
has caused the Debian Bug report #1076646,
regarding linux-image-6.9.8-amd64: Errors reported with initializing amdgpu that works with older kernel
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
1076646: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1076646
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems

--- Begin Message ---

To: Debian Bug Tracking System <submit@bugs.debian.org>

Subject: linux-image-6.9.8-amd64: Errors reported with initializing amdgpu that works with older kernel

From: Ingo <Ingo@Hoeft-online.de>

Date: Sat, 20 Jul 2024 20:04:23 +0200

Message-id: <[🔎] e6c6af48-8bb4-4f35-96fb-92f266fd162a@Hoeft-online.de>
Package: src:linux
Version: 6.9.8-1
Severity: normal

Dear Maintainer,

* What led up to the situation?
Regular upgrade of trixie.

* What exactly did you do (or not do) that was effective (or ineffective)?
sudo apt full-upgrade

* What was the outcome of this action?
On boot up the kernel reports errors with initializing amdgpu. It failsafter a timeout and boot up takes a very long time. Detailed logs fromthe systemd journal see below.
* What outcome did you expect instead?
No error messages from the kernel and normal quick boot up as given withprevious kernels.
-- Package-specific info:
** Version:
Linux version 6.9.8-amd64 (debian-kernel@lists.debian.org)
(x86_64-inux-gnu-gcc-13 (Debian 13.3.0-1) 13.3.0, GNU ld (GNU Binutils
for Debian) 2.42.50.20240625) #1 SMP PREEMPT_DYNAMIC Debian 6.9.8-1
(2024-07-07)

** Command line:
BOOT_IMAGE=/boot/vmlinuz-6.9.8-amd64 root=/dev/mapper/titan.vg-deb13 rob43.allhwsupport=1
product_name: Aspire 5253G
product_version: V1.15
chassis_vendor: Acer
chassis_version: V1.15
bios_vendor: Acer
bios_version: V1.15
board_vendor: Acer
board_name: JE50-BZ
board_version: Base Board Version

** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family14h Processor Root Complex [1022:1510]
        Subsystem: Acer Incorporated [ALI] Device [1025:0520]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-ParErr- Stepping- SERR- FastB2B- DisINTx-Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
00:01.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc.[AMD/ATI] Wrestler [Radeon HD 6310] [1002:9802] (prog-if 00 [VGAcontroller])
        Subsystem: Acer Incorporated [ALI] Device [1025:0521]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-ParErr- Stepping- SERR- FastB2B- DisINTx+Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 27
        Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M]
        Region 1: I/O ports at 4000 [size=256]
        Region 2: Memory at f0400000 (32-bit, non-prefetchable) [size=256K]
        Expansion ROM at 000c0000 [virtual] [disabled] [size=128K]
        Capabilities: <access denied>
        Kernel driver in use: radeon
        Kernel modules: radeon, amdgpu
00:01.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI]Wrestler HDMI Audio [1002:1314]
        Subsystem: Acer Incorporated [ALI] Device [1025:0520]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-ParErr- Stepping- SERR- FastB2B- DisINTx+Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin B routed to IRQ 29
        Region 0: Memory at f0444000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: snd_hda_intel
        Kernel modules: snd_hda_intel
00:11.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD/ATI]SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] (prog-if 01[AHCI 1.0])
        Subsystem: Acer Incorporated [ALI] Device [1025:0520]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-ParErr- Stepping- SERR- FastB2B- DisINTx-Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 19
        Region 0: I/O ports at 4118 [size=8]
        Region 1: I/O ports at 4124 [size=4]
        Region 2: I/O ports at 4110 [size=8]
        Region 3: I/O ports at 4120 [size=4]
        Region 4: I/O ports at 4100 [size=16]
        Region 5: Memory at f044c000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>
        Kernel driver in use: ahci
        Kernel modules: ahci
00:12.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI]SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
        Subsystem: Acer Incorporated [ALI] Device [1025:0520]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-ParErr- Stepping- SERR- FastB2B- DisINTx-Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 18
        Region 0: Memory at f044b000 (32-bit, non-prefetchable) [size=4K]
        Kernel driver in use: ohci-pci
        Kernel modules: ohci_pci
00:12.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI]SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
        Subsystem: Acer Incorporated [ALI] Device [1025:0520]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-ParErr- Stepping- SERR- FastB2B- DisINTx-Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64, Cache Line Size: 64 bytes
        Interrupt: pin B routed to IRQ 17
        Region 0: Memory at f044a000 (32-bit, non-prefetchable) [size=256]
        Capabilities: <access denied>
        Kernel driver in use: ehci-pci
        Kernel modules: ehci_pci
00:13.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI]SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
        Subsystem: Acer Incorporated [ALI] Device [1025:0520]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-ParErr- Stepping- SERR- FastB2B- DisINTx-Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 18
        Region 0: Memory at f0449000 (32-bit, non-prefetchable) [size=4K]
        Kernel driver in use: ohci-pci
        Kernel modules: ohci_pci
00:13.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI]SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
        Subsystem: Acer Incorporated [ALI] Device [1025:0520]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-ParErr- Stepping- SERR- FastB2B- DisINTx-Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64, Cache Line Size: 64 bytes
        Interrupt: pin B routed to IRQ 17
        Region 0: Memory at f0448000 (32-bit, non-prefetchable) [size=256]
        Capabilities: <access denied>
        Kernel driver in use: ehci-pci
        Kernel modules: ehci_pci
00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBusController [1002:4385] (rev 42)
        Subsystem: Acer Incorporated [ALI] Device [1025:0520]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-ParErr- Stepping- SERR- FastB2B- DisINTx+Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Kernel driver in use: piix4_smbus
        Kernel modules: i2c_piix4, sp5100_tco
00:14.2 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI]SBx00 Azalia (Intel HDA) [1002:4383] (rev 40)
        Subsystem: Acer Incorporated [ALI] Device [1025:0520]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-ParErr- Stepping- SERR- FastB2B- DisINTx-Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort-<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at f0440000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: snd_hda_intel
        Kernel modules: snd_hda_intel
00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD/ATI]SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] (rev 40)
        Subsystem: Acer Incorporated [ALI] Device [1025:0520]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-ParErr- Stepping- SERR- FastB2B- DisINTx-Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
00:14.4 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00PCI to PCI Bridge [1002:4384] (rev 40) (prog-if 01 [Subtractive decode])Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-ParErr- Stepping- SERR- FastB2B- DisINTx-Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
        I/O behind bridge: [disabled] [16-bit]
        Memory behind bridge: [disabled] [32-bit]
        Prefetchable memory behind bridge: [disabled] [32-bit]
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium>TAbort- <TAbort- <MAbort+ <SERR- <PERR-BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset-FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:15.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI]SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0) [1002:43a0] (prog-if00 [Normal decode])Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Device[1002:0000]Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-ParErr- Stepping- SERR- FastB2B- DisINTx+Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 24
        Bus: primary=00, secondary=02, subordinate=05, sec-latency=0
        I/O behind bridge: 3000-3fff [size=4K] [16-bit]
        Memory behind bridge: f0300000-f03fffff [size=1M] [32-bit]
Prefetchable memory behind bridge: f0000000-f00fffff [size=1M][32-bit]Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-<TAbort- <MAbort- <SERR- <PERR-BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset-FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport
00:15.2 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SB900PCI to PCI bridge (PCIE port 2) [1002:43a2] (prog-if 00 [Normal decode])Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Device[1002:0000]Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-ParErr- Stepping- SERR- FastB2B- DisINTx+Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 25
        Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
        I/O behind bridge: 2000-2fff [size=4K] [16-bit]
        Memory behind bridge: f0200000-f02fffff [size=1M] [32-bit]
        Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-<TAbort- <MAbort- <SERR- <PERR-BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset-FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport
00:15.3 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SB900PCI to PCI bridge (PCIE port 3) [1002:43a3] (prog-if 00 [Normal decode])Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Device[1002:0000]Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-ParErr- Stepping- SERR- FastB2B- DisINTx+Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 26
        Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
        I/O behind bridge: [disabled] [32-bit]
        Memory behind bridge: f0100000-f01fffff [size=1M] [32-bit]
        Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-<TAbort- <MAbort- <SERR- <PERR-BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset-FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport
00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family12h/14h Processor Function 0 [1022:1700] (rev 43)Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-ParErr- Stepping- SERR- FastB2B- DisINTx-Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-<TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family12h/14h Processor Function 1 [1022:1701]Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-ParErr- Stepping- SERR- FastB2B- DisINTx-Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-<TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family12h/14h Processor Function 2 [1022:1702]Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-ParErr- Stepping- SERR- FastB2B- DisINTx-Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-<TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family12h/14h Processor Function 3 [1022:1703]Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-ParErr- Stepping- SERR- FastB2B- DisINTx-Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-<TAbort- <MAbort- >SERR- <PERR- INTx-
        Capabilities: <access denied>
        Kernel driver in use: k10temp
        Kernel modules: k10temp
00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family12h/14h Processor Function 4 [1022:1704]Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-ParErr- Stepping- SERR- FastB2B- DisINTx-Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-<TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.5 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family12h/14h Processor Function 6 [1022:1718]Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-ParErr- Stepping- SERR- FastB2B- DisINTx-Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-<TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.6 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family12h/14h Processor Function 5 [1022:1716]Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-ParErr- Stepping- SERR- FastB2B- DisINTx-Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-<TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.7 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family12h/14h Processor Function 7 [1022:1719]Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-ParErr- Stepping- SERR- FastB2B- DisINTx-Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-<TAbort- <MAbort- >SERR- <PERR- INTx-
06:00.0 Ethernet controller [0200]: Qualcomm Atheros AR8151 v2.0 GigabitEthernet [1969:1083] (rev c0)
        Subsystem: Acer Incorporated [ALI] Device [1025:0520]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-ParErr- Stepping- SERR- FastB2B- DisINTx-Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 28
        Region 0: Memory at f0200000 (64-bit, non-prefetchable) [size=256K]
        Region 2: I/O ports at 2000 [size=128]
        Capabilities: <access denied>
        Kernel driver in use: atl1c
        Kernel modules: atl1c
07:00.0 Network controller [0280]: Broadcom Inc. and subsidiariesBCM43225 802.11b/g/n [14e4:4357] (rev 01)Subsystem: Foxconn International, Inc. T77H103.00 WirelessHalf-size Mini PCIe Card [105b:e021]Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-ParErr- Stepping- SERR- FastB2B- DisINTx-Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 19
        Region 0: Memory at f0100000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: bcma-pci-bridge
        Kernel modules: bcma


** USB devices:
not available


-- System Information:
Debian Release: trixie/sid
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: amd64 (x86_64)

Kernel: Linux 6.9.8-amd64 (SMP w/2 CPU threads; PREEMPT)
Locale: LANG=C.UTF-8, LC_CTYPE=C.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages linux-image-6.9.8-amd64 depends on:
ii  initramfs-tools [linux-initramfs-tool]  0.142
ii  kmod                                    32+20240611-1
ii  linux-base                              4.10.1

Versions of packages linux-image-6.9.8-amd64 recommends:
ii  apparmor  3.1.7-1+b1

Versions of packages linux-image-6.9.8-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  firmware-linux-free     20240610-1
ii  grub-pc                 2.12-2
pn  linux-doc-6.9           <none>

Versions of packages linux-image-6.9.8-amd64 is related to:
ii  firmware-amd-graphics     20230625-2
pn  firmware-atheros          <none>
pn  firmware-bnx2             <none>
pn  firmware-bnx2x            <none>
pn  firmware-brcm80211        <none>
pn  firmware-cavium           <none>
pn  firmware-intel-sound      <none>
pn  firmware-intelwimax       <none>
pn  firmware-ipw2x00          <none>
pn  firmware-ivtv             <none>
pn  firmware-iwlwifi          <none>
pn  firmware-libertas         <none>
pn  firmware-linux-nonfree    <none>
pn  firmware-misc-nonfree     <none>
pn  firmware-myricom          <none>
pn  firmware-netxen           <none>
pn  firmware-qlogic           <none>
pn  firmware-realtek          <none>
pn  firmware-samsung          <none>
pn  firmware-siano            <none>
pn  firmware-ti-connectivity  <none>
pn  xen-hypervisor            <none>

~$ journalctl -b
--- snip ---
Jul 20 00:01:41 titan-13 kernel: Console: switching to colour framebuffer device 170x48Jul 20 00:01:41 titan-13 kernel: radeon 0000:00:01.0: [drm] fb0:radeondrmfb frame buffer deviceJul 20 00:01:41 titan-13 kernel: scsi 2:0:0:0: Direct-AccessGeneric- Multi-Card 1.00 PQ: 0 ANSI: 0 CCSJul 20 00:01:41 titan-13 kernel: sd 2:0:0:0: [sdb] Media removed,stopped pollingJul 20 00:01:41 titan-13 kernel: sd 2:0:0:0: [sdb] Attached SCSIremovable disk
Jul 20 00:01:41 titan-13 kernel: [drm] amdgpu kernel modesetting enabled.
Jul 20 00:01:41 titan-13 kernel: amdgpu: Virtual CRAT table created for CPU
Jul 20 00:01:41 titan-13 kernel: amdgpu: Topology: Add CPU node
Jul 20 00:01:41 titan-13 kernel: ata1.00: exception Emask 0x0 SAct0x7fe00007 SErr 0xc0000 action 0x6 frozen
Jul 20 00:01:41 titan-13 kernel: ata1: SError: { CommWake 10B8B }
Jul 20 00:01:41 titan-13 kernel: ata1.00: failed command: READ FPDMA QUEUED
Jul 20 00:01:41 titan-13 kernel: ata1.00: cmd60/08:00:40:81:3a/00:00:07:00:00/40 tag 0 ncq dma 4096 inres40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jul 20 00:01:41 titan-13 kernel: ata1.00: status: { DRDY }
Jul 20 00:01:41 titan-13 kernel: ata1.00: failed command: READ FPDMA QUEUED
Jul 20 00:01:41 titan-13 kernel: ata1.00: cmd60/08:08:48:89:3a/00:00:07:00:00/40 tag 1 ncq dma 4096 inres40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jul 20 00:01:41 titan-13 kernel: ata1.00: status: { DRDY }
Jul 20 00:01:41 titan-13 kernel: ata1.00: failed command: READ FPDMA QUEUED
Jul 20 00:01:41 titan-13 kernel: ata1.00: cmd60/08:10:50:91:3a/00:00:07:00:00/40 tag 2 ncq dma 4096 inres40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jul 20 00:01:41 titan-13 kernel: ata1.00: status: { DRDY }
Jul 20 00:01:41 titan-13 kernel: ata1.00: failed command: READ FPDMA QUEUED
Jul 20 00:01:41 titan-13 kernel: ata1.00: cmd60/08:a8:f0:30:3a/00:00:07:00:00/40 tag 21 ncq dma 4096 inres40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jul 20 00:01:41 titan-13 kernel: ata1.00: status: { DRDY }
Jul 20 00:01:41 titan-13 kernel: ata1.00: failed command: READ FPDMA QUEUED
Jul 20 00:01:41 titan-13 kernel: ata1.00: cmd60/08:b0:f8:38:3a/00:00:07:00:00/40 tag 22 ncq dma 4096 inres40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jul 20 00:01:41 titan-13 kernel: ata1.00: status: { DRDY }
Jul 20 00:01:41 titan-13 kernel: ata1.00: failed command: READ FPDMA QUEUED
Jul 20 00:01:41 titan-13 kernel: ata1.00: cmd60/08:b8:00:41:3a/00:00:07:00:00/40 tag 23 ncq dma 4096 inres40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jul 20 00:01:41 titan-13 kernel: ata1.00: status: { DRDY }
Jul 20 00:01:41 titan-13 kernel: ata1.00: failed command: READ FPDMA QUEUED
Jul 20 00:01:41 titan-13 kernel: ata1.00: cmd60/08:c0:08:49:3a/00:00:07:00:00/40 tag 24 ncq dma 4096 inres40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jul 20 00:01:41 titan-13 kernel: ata1.00: status: { DRDY }
Jul 20 00:01:41 titan-13 kernel: ata1.00: failed command: READ FPDMA QUEUED
Jul 20 00:01:41 titan-13 kernel: ata1.00: cmd60/08:c8:10:51:3a/00:00:07:00:00/40 tag 25 ncq dma 4096 inres40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jul 20 00:01:41 titan-13 kernel: ata1.00: status: { DRDY }
Jul 20 00:01:41 titan-13 kernel: ata1.00: failed command: READ FPDMA QUEUED
Jul 20 00:01:41 titan-13 kernel: ata1.00: cmd60/08:d0:18:59:3a/00:00:07:00:00/40 tag 26 ncq dma 4096 inres40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jul 20 00:01:41 titan-13 kernel: ata1.00: status: { DRDY }
Jul 20 00:01:41 titan-13 kernel: ata1.00: failed command: READ FPDMA QUEUED
Jul 20 00:01:41 titan-13 kernel: ata1.00: cmd60/08:d8:20:61:3a/00:00:07:00:00/40 tag 27 ncq dma 4096 inres40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jul 20 00:01:41 titan-13 kernel: ata1.00: status: { DRDY }
Jul 20 00:01:41 titan-13 kernel: ata1.00: failed command: READ FPDMA QUEUED
Jul 20 00:01:41 titan-13 kernel: ata1.00: cmd60/08:e0:28:69:3a/00:00:07:00:00/40 tag 28 ncq dma 4096 inres40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jul 20 00:01:41 titan-13 kernel: ata1.00: status: { DRDY }
Jul 20 00:01:41 titan-13 kernel: ata1.00: failed command: READ FPDMA QUEUED
Jul 20 00:01:41 titan-13 kernel: ata1.00: cmd60/08:e8:30:71:3a/00:00:07:00:00/40 tag 29 ncq dma 4096 inres40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jul 20 00:01:41 titan-13 kernel: ata1.00: status: { DRDY }
Jul 20 00:01:41 titan-13 kernel: ata1.00: failed command: READ FPDMA QUEUED
Jul 20 00:01:41 titan-13 kernel: ata1.00: cmd60/08:f0:38:79:3a/00:00:07:00:00/40 tag 30 ncq dma 4096 inres40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jul 20 00:01:41 titan-13 kernel: ata1.00: status: { DRDY }
Jul 20 00:01:41 titan-13 kernel: ata1: hard resetting link
Jul 20 00:01:41 titan-13 kernel: ata1: SATA link up 3.0 Gbps (SStatus123 SControl 300)
Jul 20 00:01:41 titan-13 kernel: ata1.00: configured for UDMA/133
Jul 20 00:01:41 titan-13 kernel: ata1.00: device reported invalid CHSsector 0Jul 20 00:01:41 titan-13 kernel: ata1.00: device reported invalid CHSsector 0Jul 20 00:01:41 titan-13 kernel: ata1.00: device reported invalid CHSsector 0Jul 20 00:01:41 titan-13 kernel: ata1.00: device reported invalid CHSsector 0Jul 20 00:01:41 titan-13 kernel: ata1.00: device reported invalid CHSsector 0Jul 20 00:01:41 titan-13 kernel: ata1.00: device reported invalid CHSsector 0Jul 20 00:01:41 titan-13 kernel: ata1.00: device reported invalid CHSsector 0Jul 20 00:01:41 titan-13 kernel: ata1.00: device reported invalid CHSsector 0Jul 20 00:01:41 titan-13 kernel: ata1.00: device reported invalid CHSsector 0Jul 20 00:01:41 titan-13 kernel: ata1.00: device reported invalid CHSsector 0Jul 20 00:01:41 titan-13 kernel: ata1.00: device reported invalid CHSsector 0Jul 20 00:01:41 titan-13 kernel: ata1.00: device reported invalid CHSsector 0Jul 20 00:01:41 titan-13 kernel: ata1.00: device reported invalid CHSsector 0
Jul 20 00:01:41 titan-13 kernel: ata1: EH complete
Jul 20 00:01:41 titan-13 kernel: ata1.00: exception Emask 0x0 SAct0x7fc0000f SErr 0xc0000 action 0x6 frozen
Jul 20 00:01:41 titan-13 kernel: ata1: SError: { CommWake 10B8B }
Jul 20 00:01:41 titan-13 kernel: ata1.00: failed command: READ FPDMA QUEUED
Jul 20 00:01:41 titan-13 kernel: ata1.00: cmd60/08:00:58:f9:9b/00:00:08:00:00/40 tag 0 ncq dma 4096 inres40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jul 20 00:01:41 titan-13 kernel: ata1.00: status: { DRDY }
Jul 20 00:01:41 titan-13 kernel: ata1.00: failed command: READ FPDMA QUEUED
Jul 20 00:01:41 titan-13 kernel: ata1.00: cmd60/08:08:60:01:9c/00:00:08:00:00/40 tag 1 ncq dma 4096 inres40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jul 20 00:01:41 titan-13 kernel: ata1.00: status: { DRDY }
Jul 20 00:01:41 titan-13 kernel: ata1.00: failed command: READ FPDMA QUEUED
Jul 20 00:01:41 titan-13 kernel: ata1.00: cmd60/08:10:68:09:9c/00:00:08:00:00/40 tag 2 ncq dma 4096 inres40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jul 20 00:01:41 titan-13 kernel: ata1.00: status: { DRDY }
Jul 20 00:01:41 titan-13 kernel: ata1.00: failed command: READ FPDMA QUEUED
Jul 20 00:01:41 titan-13 kernel: ata1.00: cmd60/08:18:70:11:9c/00:00:08:00:00/40 tag 3 ncq dma 4096 inres40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jul 20 00:01:41 titan-13 kernel: ata1.00: status: { DRDY }
Jul 20 00:01:41 titan-13 kernel: ata1.00: failed command: READ FPDMA QUEUED
Jul 20 00:01:41 titan-13 kernel: ata1.00: cmd60/08:b0:10:b1:9b/00:00:08:00:00/40 tag 22 ncq dma 4096 inres40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jul 20 00:01:41 titan-13 kernel: ata1.00: status: { DRDY }
Jul 20 00:01:41 titan-13 kernel: ata1.00: failed command: READ FPDMA QUEUED
Jul 20 00:01:41 titan-13 kernel: ata1.00: cmd60/08:b8:18:b9:9b/00:00:08:00:00/40 tag 23 ncq dma 4096 inres40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jul 20 00:01:41 titan-13 kernel: ata1.00: status: { DRDY }
Jul 20 00:01:41 titan-13 kernel: ata1.00: failed command: READ FPDMA QUEUED
Jul 20 00:01:41 titan-13 kernel: ata1.00: cmd60/08:c0:20:c1:9b/00:00:08:00:00/40 tag 24 ncq dma 4096 inres40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jul 20 00:01:41 titan-13 kernel: ata1.00: status: { DRDY }
Jul 20 00:01:41 titan-13 kernel: ata1.00: failed command: READ FPDMA QUEUED
Jul 20 00:01:41 titan-13 kernel: ata1.00: cmd60/08:c8:28:c9:9b/00:00:08:00:00/40 tag 25 ncq dma 4096 inres40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jul 20 00:01:41 titan-13 kernel: ata1.00: status: { DRDY }
Jul 20 00:01:41 titan-13 kernel: ata1.00: failed command: READ FPDMA QUEUED
Jul 20 00:01:41 titan-13 kernel: ata1.00: cmd60/08:d0:30:d1:9b/00:00:08:00:00/40 tag 26 ncq dma 4096 inres40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jul 20 00:01:41 titan-13 kernel: ata1.00: status: { DRDY }
Jul 20 00:01:41 titan-13 kernel: ata1.00: failed command: READ FPDMA QUEUED
Jul 20 00:01:41 titan-13 kernel: ata1.00: cmd60/08:d8:38:d9:9b/00:00:08:00:00/40 tag 27 ncq dma 4096 inres40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jul 20 00:01:41 titan-13 kernel: ata1.00: status: { DRDY }
Jul 20 00:01:41 titan-13 kernel: ata1.00: failed command: READ FPDMA QUEUED
Jul 20 00:01:41 titan-13 kernel: ata1.00: cmd60/08:e0:40:e1:9b/00:00:08:00:00/40 tag 28 ncq dma 4096 inres40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jul 20 00:01:41 titan-13 kernel: ata1.00: status: { DRDY }
Jul 20 00:01:41 titan-13 kernel: ata1.00: failed command: READ FPDMA QUEUED
Jul 20 00:01:41 titan-13 kernel: ata1.00: cmd60/08:e8:48:e9:9b/00:00:08:00:00/40 tag 29 ncq dma 4096 inres40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jul 20 00:01:41 titan-13 kernel: ata1.00: status: { DRDY }
Jul 20 00:01:41 titan-13 kernel: ata1.00: failed command: READ FPDMA QUEUED
Jul 20 00:01:41 titan-13 kernel: ata1.00: cmd60/08:f0:50:f1:9b/00:00:08:00:00/40 tag 30 ncq dma 4096 inres40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jul 20 00:01:41 titan-13 kernel: ata1.00: status: { DRDY }
Jul 20 00:01:41 titan-13 kernel: ata1: hard resetting link
Jul 20 00:01:41 titan-13 kernel: ata1: SATA link up 3.0 Gbps (SStatus123 SControl 300)
Jul 20 00:01:41 titan-13 kernel: ata1.00: configured for UDMA/133
Jul 20 00:01:41 titan-13 kernel: ata1.00: device reported invalid CHSsector 0Jul 20 00:01:41 titan-13 kernel: ata1.00: device reported invalid CHSsector 0Jul 20 00:01:41 titan-13 kernel: ata1.00: device reported invalid CHSsector 0Jul 20 00:01:41 titan-13 kernel: ata1.00: device reported invalid CHSsector 0Jul 20 00:01:41 titan-13 kernel: ata1.00: device reported invalid CHSsector 0Jul 20 00:01:41 titan-13 kernel: ata1.00: device reported invalid CHSsector 0Jul 20 00:01:41 titan-13 kernel: ata1.00: device reported invalid CHSsector 0Jul 20 00:01:41 titan-13 kernel: ata1.00: device reported invalid CHSsector 0Jul 20 00:01:41 titan-13 kernel: ata1.00: device reported invalid CHSsector 0Jul 20 00:01:41 titan-13 kernel: ata1.00: device reported invalid CHSsector 0Jul 20 00:01:41 titan-13 kernel: ata1.00: device reported invalid CHSsector 0Jul 20 00:01:41 titan-13 kernel: ata1.00: device reported invalid CHSsector 0Jul 20 00:01:41 titan-13 kernel: ata1.00: device reported invalid CHSsector 0
Jul 20 00:01:41 titan-13 kernel: ata1: EH complete
Jul 20 00:01:41 titan-13 kernel: PM: Image not found (code -22)
Jul 20 00:01:41 titan-13 kernel: EXT4-fs (dm-2): mounted filesystem3015ab46-ef45-48a3-a227-7a8e2fbc4d9d ro with ordered data mode. Quotamode: none.
--- snap ---
Attachment: OpenPGP_signature.asc
Description: OpenPGP digital signature

--- End Message ---

--- Begin Message ---

To: 1076646-done@bugs.debian.org

Subject: linux-image-6.9.8-amd64: Errors reported with initializing amdgpu that works with older kernel

From: Ingo <Ingo@Hoeft-online.de>

Date: Sun, 21 Jul 2024 21:51:14 +0200

Message-id: <5058cabd-1e12-4b7e-a59d-8a23634fde84@Hoeft-online.de>

My further investigations have shown that the reported bug may be aknown issue with NCQ (SATA native command queueing) in particulartogether with older amd hardware. This is given here with the used oldlaptop with amdgpu.
NCQ is an extension of the Serial ATA protocol allowing hard disk drivesto internally optimize the order in which received read and writecommands are executed.
But why it works all the time until upgrading to kernel 6.9.8-1? Withthe information fromhttps://ata.wiki.kernel.org/index.php/Libata_FAQ#Enabling.2C_disabling_and_checking_NCQI find that the previous used kernel 6.6.15 does not show the expectedinformation. It shows a queue_depth (cat/sys/block/sda/device/queue_depth) of 32. That is an ambiguous value asnoted in the info. I assume that NCQ isn't enabled due to this value andthe kernel runs without the reported error messages.
NCQ is correct enabled when using kernel 6.9.8-1 and triggers the errormessages in conjunction with amdgpu on old hardware. But there is akernel boot option "libata.force=noncq" to disable it(https://docs.kernel.org/admin-guide/kernel-parameters.html).
With the following entry in '/etc/default/grub' boot up will besuccessful without error messages:
GRUB_CMDLINE_LINUX="libata.force=noncq"

Ingo
Attachment: OpenPGP_signature.asc
Description: OpenPGP digital signature

--- End Message ---

Reply to:

References:
- Bug#1076646: linux-image-6.9.8-amd64: Errors reported with initializing amdgpu that works with older kernel
  - From: Ingo <Ingo@Hoeft-online.de>

Prev by Date: Re: Is the sh7785lcr kernel still useful?
Next by Date: Bug#1076561:
Previous by thread: Bug#1076646: linux-image-6.9.8-amd64: Errors reported with initializing amdgpu that works with older kernel
Next by thread: Bug#1076517: marked as done (bugs.debian.org: Dmesg kworker kernel paging request Oops systemd uninterruptable sleep state D)
Index(es):
- Date
- Thread