Bug#1061449: linux-image-6.7-amd64: a boot message from amdgpu
Finally, no more complaints!
$ uname -a
Linux kos-moceratops 6.7+unreleased-amd64 #1 SMP PREEMPT_DYNAMIC
Debian 6.7.1-1~exp1a~test (2024-01-24) x86_64 GNU/Linux
$ sudo dmesg | grep '\(amdgpu\|drm\)'
[ 1.095216] ACPI: bus type drm_connector registered
[ 2.085314] i915 0000:00:02.0: [drm] VT-d active for gfx access
[ 2.085425] i915 0000:00:02.0: [drm] Using Transparent Hugepages
[ 2.087746] i915 0000:00:02.0: [drm] Finished loading DMC firmware
i915/kbl_dmc_ver1_04.bin (v1.4)
[ 3.608758] [drm] amdgpu kernel modesetting enabled.
[ 3.608767] amdgpu: vga_switcheroo: detected switching method
\_SB_.PCI0.GFX0.ATPX handle
[ 3.608784] amdgpu: ATPX version 1, functions 0x00000033
[ 3.608830] amdgpu: ATPX Hybrid Graphics
[ 3.610446] amdgpu: Virtual CRAT table created for CPU
[ 3.610455] amdgpu: Topology: Add CPU node
[ 3.610550] amdgpu 0000:01:00.0: enabling device (0000 -> 0003)
[ 3.610586] [drm] initializing kernel modesetting (POLARIS12
0x1002:0x6981 0x1028:0x0926 0x00).
[ 3.630941] [drm] register mmio base: 0xB4300000
[ 3.630944] [drm] register mmio size: 262144
[ 3.631086] [drm] add ip block number 0 <vi_common>
[ 3.631087] [drm] add ip block number 1 <gmc_v8_0>
[ 3.631088] [drm] add ip block number 2 <tonga_ih>
[ 3.631089] [drm] add ip block number 3 <gfx_v8_0>
[ 3.631089] [drm] add ip block number 4 <sdma_v3_0>
[ 3.631090] [drm] add ip block number 5 <powerplay>
[ 3.631091] [drm] add ip block number 6 <dm>
[ 3.631091] [drm] add ip block number 7 <uvd_v6_0>
[ 3.631092] [drm] add ip block number 8 <vce_v3_0>
[ 3.642892] amdgpu 0000:01:00.0: amdgpu: Fetched VBIOS from ATRM
[ 3.642895] amdgpu: ATOM BIOS: BR43850.001
[ 3.642927] amdgpu 0000:01:00.0: firmware: direct-loading firmware
amdgpu/polaris12_sdma.bin
[ 3.642991] amdgpu 0000:01:00.0: firmware: direct-loading firmware
amdgpu/polaris12_sdma1.bin
[ 3.643023] [drm] UVD is enabled in VM mode
[ 3.643024] [drm] UVD ENC is enabled in VM mode
[ 3.643026] [drm] VCE enabled in VM mode
[ 3.643027] amdgpu 0000:01:00.0: amdgpu: Trusted Memory Zone (TMZ)
feature not supported
[ 3.643036] [drm] GPU posting now...
[ 3.755975] [drm] vm size is 64 GB, 2 levels, block size is 10-bit,
fragment size is 9-bit
[ 3.756017] amdgpu 0000:01:00.0: firmware: direct-loading firmware
amdgpu/polaris12_k_mc.bin
[ 3.756122] amdgpu 0000:01:00.0: BAR 2: releasing [mem
0x80000000-0x801fffff 64bit pref]
[ 3.756124] amdgpu 0000:01:00.0: BAR 0: releasing [mem
0x70000000-0x7fffffff 64bit pref]
[ 3.756142] amdgpu 0000:01:00.0: BAR 0: assigned [mem
0x4100000000-0x41ffffffff 64bit pref]
[ 3.756147] amdgpu 0000:01:00.0: BAR 2: assigned [mem
0x4080000000-0x40801fffff 64bit pref]
[ 3.756162] amdgpu 0000:01:00.0: amdgpu: VRAM: 4096M
0x000000F400000000 - 0x000000F4FFFFFFFF (4096M used)
[ 3.756163] amdgpu 0000:01:00.0: amdgpu: GART: 256M
0x000000FF00000000 - 0x000000FF0FFFFFFF
[ 3.756174] [drm] Detected VRAM RAM=4096M, BAR=4096M
[ 3.756175] [drm] RAM width 128bits GDDR5
[ 3.756337] [drm] amdgpu: 4096M of VRAM memory ready
[ 3.756338] [drm] amdgpu: 7879M of GTT memory ready.
[ 3.756357] [drm] GART: num cpu pages 65536, num gpu pages 65536
[ 3.756874] [drm] PCIE GART of 256M enabled (table at 0x000000F4FFF80000).
[ 3.756946] amdgpu 0000:01:00.0: firmware: direct-loading firmware
amdgpu/polaris12_pfp_2.bin
[ 3.756996] amdgpu 0000:01:00.0: firmware: direct-loading firmware
amdgpu/polaris12_me_2.bin
[ 3.757042] amdgpu 0000:01:00.0: firmware: direct-loading firmware
amdgpu/polaris12_ce_2.bin
[ 3.757063] [drm] Chained IB support enabled!
[ 3.757072] amdgpu 0000:01:00.0: firmware: direct-loading firmware
amdgpu/polaris12_rlc.bin
[ 3.757146] amdgpu 0000:01:00.0: firmware: direct-loading firmware
amdgpu/polaris12_mec_2.bin
[ 3.757726] amdgpu 0000:01:00.0: firmware: direct-loading firmware
amdgpu/polaris12_mec2_2.bin
[ 3.758564] amdgpu: hwmgr_sw_init smu backed is polaris10_smu
[ 3.758620] amdgpu 0000:01:00.0: firmware: direct-loading firmware
amdgpu/polaris12_uvd.bin
[ 3.759394] [drm] Found UVD firmware Version: 1.130 Family ID: 16
[ 3.760073] amdgpu 0000:01:00.0: firmware: direct-loading firmware
amdgpu/polaris12_vce.bin
[ 3.760419] [drm] Found VCE firmware Version: 53.26 Binary ID: 3
[ 3.760798] amdgpu 0000:01:00.0: firmware: direct-loading firmware
amdgpu/polaris12_k_smc.bin
[ 4.092386] [drm] Display Core v3.2.259 initialized on DCE 11.2
[ 4.636780] i915 0000:00:02.0: [drm] *ERROR* Failed to probe lspcon
[ 4.636791] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 0
[ 5.207332] i915 0000:00:02.0: [drm] *ERROR* Failed to probe lspcon
[ 5.207335] i915 0000:00:02.0: [drm] *ERROR* LSPCON init failed on port D
[ 5.607371] fbcon: i915drmfb (fb0) is primary device
[ 5.629068] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[ 6.211671] i915 0000:00:02.0: [drm] *ERROR* Failed to probe lspcon
[ 6.211682] i915 0000:00:02.0: [drm] *ERROR* LSPCON init failed on port D
[ 7.194222] i915 0000:00:02.0: [drm] *ERROR* Failed to probe lspcon
[ 7.194233] i915 0000:00:02.0: [drm] *ERROR* LSPCON init failed on port D
[ 7.729740] [drm] UVD and UVD ENC initialized successfully.
[ 7.829659] [drm] VCE initialized successfully.
[ 7.831637] kfd kfd: amdgpu: Allocated 3969056 bytes on gart
[ 7.831650] kfd kfd: amdgpu: Total number of KFD nodes to be created: 1
[ 7.831766] amdgpu: Virtual CRAT table created for GPU
[ 7.831799] amdgpu: Topology: Add dGPU node [0x6981:0x1002]
[ 7.831801] kfd kfd: amdgpu: added device 1002:6981
[ 7.831811] amdgpu 0000:01:00.0: amdgpu: SE 2, SH per SE 1, CU per
SH 5, active_cu_number 10
[ 7.834477] amdgpu 0000:01:00.0: amdgpu: Using BOCO for runtime pm
[ 7.834989] [drm] Initialized amdgpu 3.56.0 20150101 for
0000:01:00.0 on minor 1
[ 7.840264] amdgpu 0000:01:00.0: [drm] Cannot find any crtc or sizes
[ 9.050977] systemd[1]: Starting modprobe@drm.service - Load Kernel
Module drm...
[ 9.062123] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 9.062252] systemd[1]: Finished modprobe@drm.service - Load Kernel
Module drm.
[ 9.662446] snd_hda_intel 0000:01:00.1: bound 0000:01:00.0 (ops
amdgpu_dm_audio_component_bind_ops [amdgpu])
[ 12.417633] i915 0000:00:02.0: [drm] *ERROR* Failed to probe lspcon
[ 12.417637] i915 0000:00:02.0: [drm] *ERROR* LSPCON init failed on port D
[ 22.566786] i915 0000:00:02.0: [drm] *ERROR* Failed to probe lspcon
[ 22.566790] i915 0000:00:02.0: [drm] *ERROR* LSPCON init failed on port D
Does this need further testing from my side?
Thanks!!
Le mer. 24 janv. 2024 à 20:09, Patrice Duroux
<patrice.duroux@gmail.com> a écrit :
>
> Yes, the message is from the version 6.7.1-1~exp1, sorry for the doubt.
> It is just because, package name is «simply»: linux-image-6.7-amd64
> and so I wrote 6.7, expecting the exact version from reportbug.
> I will give it a try then and be back.
>
>
> Le mer. 24 janv. 2024 à 20:02, Diederik de Haas
> <didi.debian@cknow.org> a écrit :
> >
> > Control: tag -1 moreinfo
> >
> > On Wednesday, 24 January 2024 19:38:16 CET Patrice Duroux wrote:
> > > Package: src:linux
> > > Version: 6.7.1-1~exp1
> > > Severity: normal
> > >
> > > Giving a try to 6.7, here is a message extracted from dmesg:
> >
> > Is that dmesg output from 6.7(.0) or 6.7.1?
> > If from 6.7.1, does the error NOT occur with 6.7.0?
> > If that's the case, can you test the attached patch with the `test-patches`
> > script? See the following link for instructions:
> > https://kernel-team.pages.debian.net/kernel-handbook/ch-common-tasks.html#id-1.6.6.4
Reply to: