Your message dated Sun, 21 Jan 2024 15:50:08 +0100 with message-id <58825630.5iRxLm7csj@bagend> and subject line Re: Bug#985632: Bug#981616: RPi4B 5GHz WiFi problems #985632 & #981616 completely went away by replacing brcmfmac43455-sdio.bin and brcmfmac43455-sdio.clm_blob has caused the Debian Bug report #981616, regarding 5GHz WiFi does not work with vc4.ko on RPi4 and 4K display to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 981616: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=981616 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-5.10.0-3-arm64-unsigned: WiFi does not work with vc4.ko on RPi4, module_blacklist=vc4 enables WiFi
- From: Ryutaroh Matsumoto <ryutaroh@ict.e.titech.ac.jp>
- Date: Tue, 02 Feb 2021 16:04:11 +0900
- Message-id: <161224945154.507.10381361634968696152.reportbug@raspi4test>
Package: src:linux Version: 5.10.12-1 Severity: important Dear Maintainer, With Debian kernel 5.10.12-1, WiFi does not work on my RPi 4B 8GB model. Disabling vc4.ko by module_blacklist=vc4 in kernel command line restores WiFi connection... I have not yet verified if this is an upstream issue. The network is configured by systemd-networkd and wpa_supplicant, but I observe the same issue with ifupdown and NetworkManager. Best regards, Ryutaroh Matsumoto -- Package-specific info: ** Version: Linux version 5.10.0-3-arm64 (debian-kernel@lists.debian.org) (gcc-10 (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.1) #1 SMP Debian 5.10.12-1 (2021-01-30) ** Command line: dma.dmachans=0x37f5 bcm2709.boardrev=0xd03114 bcm2709.serial=0x488d2af3 bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0 smsc95xx.macaddr=DC:A6:32:BB:99:D9 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty0 root=LABEL=RASPIROOT rw fsck.repair=yes net.ifnames=0 rootwait rootfstype=ext4 module_blacklist=vc4 ** Tainted: CE (9216) * staging driver was loaded * unsigned module was loaded ** Kernel log: [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083] [ 0.000000] Linux version 5.10.0-3-arm64 (debian-kernel@lists.debian.org) (gcc-10 (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.1) #1 SMP Debian 5.10.12-1 (2021-01-30) [ 0.000000] Machine model: Raspberry Pi 4 Model B Rev 1.4 [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000037400000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000001ffffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x1ff019b00-0x1ff01bfff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000003fffffff] [ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x00000001ffffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff] [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000fbffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000001ffffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff] [ 0.000000] On node 0 totalpages: 2061312 [ 0.000000] DMA zone: 3792 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 242688 pages, LIFO batch:63 [ 0.000000] DMA32 zone: 12288 pages used for memmap [ 0.000000] DMA32 zone: 770048 pages, LIFO batch:63 [ 0.000000] Normal zone: 16384 pages used for memmap [ 0.000000] Normal zone: 1048576 pages, LIFO batch:63 [ 0.000000] percpu: Embedded 33 pages/cpu s95192 r8192 d31784 u135168 [ 0.000000] pcpu-alloc: s95192 r8192 d31784 u135168 alloc=33*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: EL2 vector hardening [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2028848 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: dma.dmachans=0x37f5 bcm2709.boardrev=0xd03114 bcm2709.serial=0x488d2af3 bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0 smsc95xx.macaddr=DC:A6:32:BB:99:D9 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty0 root=LABEL=RASPIROOT rw fsck.repair=yes net.ifnames=0 rootwait rootfstype=ext4 module_blacklist=vc4 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x0000000033400000-0x0000000037400000] (64MB) [ 0.000000] Memory: 4913088K/8245248K available (11648K kernel code, 2420K rwdata, 6848K rodata, 5312K init, 588K bss, 281488K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x3c/0x5c0 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 37920 entries in 149 pages [ 0.000000] ftrace: allocated 149 pages with 4 groups [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns [ 0.000006] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns [ 0.000182] Console: colour dummy device 80x25 [ 0.000621] printk: console [tty0] enabled [ 0.000749] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000) [ 0.000778] pid_max: default: 32768 minimum: 301 [ 0.000943] LSM: Security Framework initializing [ 0.000992] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.001136] AppArmor: AppArmor initialized [ 0.001156] TOMOYO Linux initialized [ 0.001343] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.001459] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.003997] rcu: Hierarchical SRCU implementation. [ 0.006113] EFI services will not be available. [ 0.006673] smp: Bringing up secondary CPUs ... [ 0.007365] Detected PIPT I-cache on CPU1 [ 0.007440] CPU1: Booted secondary processor 0x0000000001 [0x410fd083] [ 0.008281] Detected PIPT I-cache on CPU2 [ 0.008326] CPU2: Booted secondary processor 0x0000000002 [0x410fd083] [ 0.009148] Detected PIPT I-cache on CPU3 [ 0.009195] CPU3: Booted secondary processor 0x0000000003 [0x410fd083] [ 0.009307] smp: Brought up 1 node, 4 CPUs [ 0.009374] SMP: Total of 4 processors activated. [ 0.009389] CPU features: detected: 32-bit EL0 Support [ 0.009405] CPU features: detected: CRC32 instructions [ 0.009421] CPU features: detected: 32-bit EL1 Support [ 0.032139] CPU: All CPU(s) started at EL2 [ 0.032240] alternatives: patching kernel code [ 0.189628] node 0 deferred pages initialised in 156ms [ 0.192108] devtmpfs: initialized [ 0.199403] Registered cp15_barrier emulation handler [ 0.199447] Registered setend emulation handler [ 0.199476] KASLR enabled [ 0.199804] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.199901] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.202089] pinctrl core: initialized pinctrl subsystem [ 0.202829] DMI not present or invalid. [ 0.203543] NET: Registered protocol family 16 [ 0.205385] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.205652] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.206186] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.206247] audit: initializing netlink subsys (disabled) [ 0.206543] audit: type=2000 audit(0.204:1): state=initialized audit_enabled=0 res=1 [ 0.207808] thermal_sys: Registered thermal governor 'fair_share' [ 0.207816] thermal_sys: Registered thermal governor 'bang_bang' [ 0.207836] thermal_sys: Registered thermal governor 'step_wise' [ 0.207850] thermal_sys: Registered thermal governor 'user_space' [ 0.207864] thermal_sys: Registered thermal governor 'power_allocator' [ 0.208258] cpuidle: using governor ladder [ 0.208451] cpuidle: using governor menu [ 0.208748] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.208886] ASID allocator initialised with 32768 entries [ 0.209316] Serial: AMBA PL011 UART driver [ 0.236297] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.236333] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.236349] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.236365] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.897505] ACPI: Interpreter disabled. [ 0.897797] iommu: Default domain type: Translated [ 0.898085] vgaarb: loaded [ 0.898457] EDAC MC: Ver: 3.0.0 [ 0.899964] NetLabel: Initializing [ 0.899984] NetLabel: domain hash size = 128 [ 0.899996] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.900086] NetLabel: unlabeled traffic allowed by default [ 0.900610] clocksource: Switched to clocksource arch_sys_counter [ 0.972121] VFS: Disk quotas dquot_6.6.0 [ 0.972234] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.973086] AppArmor: AppArmor Filesystem Enabled [ 0.974068] simple-framebuffer 3e29a000.framebuffer: framebuffer at 0x3e29a000, 0x960000 bytes, mapped to 0x(____ptrval____) [ 0.974096] simple-framebuffer 3e29a000.framebuffer: format=a8r8g8b8, mode=1920x1280x32, linelength=7680 [ 0.999743] Console: switching to colour frame buffer device 240x80 [ 1.024888] simple-framebuffer 3e29a000.framebuffer: fb0: simplefb registered! [ 1.025091] pnp: PnP ACPI: disabled [ 1.033930] NET: Registered protocol family 2 [ 1.034939] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 1.035617] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 1.037030] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 1.037917] TCP: Hash tables configured (established 65536 bind 65536) [ 1.038538] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.038898] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.039339] NET: Registered protocol family 1 [ 1.039449] NET: Registered protocol family 44 [ 1.039541] PCI: CLS 0 bytes, default 64 [ 1.039914] Trying to unpack rootfs image as initramfs... [ 3.135407] Freeing initrd memory: 28336K [ 3.136884] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available [ 3.137185] kvm [1]: IPA Size Limit: 44 bits [ 3.138781] kvm [1]: vgic interrupt IRQ9 [ 3.139037] kvm [1]: Hyp mode initialized successfully [ 3.140824] Initialise system trusted keyrings [ 3.140949] Key type blacklist registered [ 3.141293] workingset: timestamp_bits=42 max_order=21 bucket_order=0 [ 3.147482] zbud: loaded [ 3.148382] integrity: Platform Keyring initialized [ 3.148483] Key type asymmetric registered [ 3.148560] Asymmetric key parser 'x509' registered [ 3.148722] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 3.149100] io scheduler mq-deadline registered [ 3.155560] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 3.156415] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges: [ 3.156551] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff] [ 3.156755] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x0603ffffff -> 0x00f8000000 [ 3.156929] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00bfffffff -> 0x0400000000 [ 3.222691] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC) [ 3.223013] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00 [ 3.223132] pci_bus 0000:00: root bus resource [bus 00-ff] [ 3.223236] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff]) [ 3.223447] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400 [ 3.223631] pci 0000:00:00.0: PME# supported from D0 D3hot [ 3.226353] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330 [ 3.226519] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] [ 3.226800] pci 0000:01:00.0: PME# supported from D0 D3hot [ 3.238804] pci 0000:00:00.0: BAR 14: assigned [mem 0x600000000-0x6000fffff] [ 3.238940] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit] [ 3.239083] pci 0000:00:00.0: PCI bridge to [bus 01] [ 3.239176] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff] [ 3.239491] pcieport 0000:00:00.0: enabling device (0000 -> 0002) [ 3.239750] pcieport 0000:00:00.0: PME: Signaling with IRQ 50 [ 3.240226] pcieport 0000:00:00.0: AER: enabled with IRQ 50 [ 3.251011] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 3.253199] fe215040.serial: ttyS1 at MMIO 0xfe215040 (irq = 26, base_baud = 33402922) is a 16550 [ 3.254427] Serial: AMBA driver [ 3.254802] msm_serial: driver initialized [ 3.256011] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 3.256913] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [ 3.258000] mousedev: PS/2 mouse device common for all mice [ 3.265149] brcmstb-i2c fef04500.i2c: @97500hz registered in polling mode [ 3.271417] brcmstb-i2c fef09500.i2c: @97500hz registered in polling mode [ 3.278667] ledtrig-cpu: registered to indicate activity on CPUs [ 3.285184] bcm2835-mbox fe00b880.mailbox: mailbox enabled [ 3.292766] NET: Registered protocol family 10 [ 3.338611] Segment Routing with IPv6 [ 3.344736] mip6: Mobile IPv6 [ 3.350731] NET: Registered protocol family 17 [ 3.356868] mpls_gso: MPLS GSO support [ 3.363447] registered taskstats version 1 [ 3.369423] Loading compiled-in X.509 certificates [ 3.525653] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 3.531876] Loaded X.509 cert 'Debian Secure Boot Signer 2020: 00b55eb3b9' [ 3.538182] zswap: loaded using pool lzo/zbud [ 3.544840] Key type ._fscrypt registered [ 3.550964] Key type .fscrypt registered [ 3.557026] Key type fscrypt-provisioning registered [ 3.563285] AppArmor: AppArmor sha1 policy hashing enabled [ 3.574994] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 24, base_baud = 0) is a PL011 rev2 [ 3.581413] serial serial0: tty port ttyAMA0 registered [ 3.590089] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-01-07T18:27:29 [ 3.770997] Freeing unused kernel memory: 5312K [ 3.893052] Checked W+X mappings: passed, no W+X pages found [ 3.899215] Run /init as init process [ 3.905249] with arguments: [ 3.905256] /init [ 3.905261] with environment: [ 3.905266] HOME=/ [ 3.905271] TERM=linux [ 4.238862] phy_generic: module verification failed: signature and/or required key missing - tainting kernel [ 4.248195] usb_phy_generic phy: supply vcc not found, using dummy regulator [ 4.265289] libphy: Fixed MDIO Bus: probed [ 4.273545] sdhci: Secure Digital Host Controller Interface driver [ 4.279734] sdhci: Copyright(c) Pierre Ossman [ 4.298360] sdhci-pltfm: SDHCI platform and OF driver helper [ 4.306464] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000 [ 4.320238] sdhci-iproc fe300000.sdhci: allocated mmc-pwrseq [ 4.320759] usbcore: registered new interface driver usbfs [ 4.338576] usbcore: registered new interface driver hub [ 4.344975] usbcore: registered new device driver usb [ 4.372687] mmc0: SDHCI controller on fe300000.sdhci [fe300000.sdhci] using PIO [ 4.384749] mmc1: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA [ 4.403374] mmc0: queuing unknown CIS tuple 0x80 (2 bytes) [ 4.412058] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 4.420081] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 [ 4.426602] mmc0: queuing unknown CIS tuple 0x80 (3 bytes) [ 4.435703] dwc2 fe980000.usb: supply vusb_d not found, using dummy regulator [ 4.436109] mmc0: queuing unknown CIS tuple 0x80 (3 bytes) [ 4.436750] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000000000000890 [ 4.437721] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 4.437730] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.437736] usb usb1: Product: xHCI Host Controller [ 4.437743] usb usb1: Manufacturer: Linux 5.10.0-3-arm64 xhci-hcd [ 4.437748] usb usb1: SerialNumber: 0000:01:00.0 [ 4.438757] hub 1-0:1.0: USB hub found [ 4.439043] hub 1-0:1.0: 1 port detected [ 4.440008] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 4.440028] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [ 4.440048] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed [ 4.440798] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 4.440807] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.440814] usb usb2: Product: xHCI Host Controller [ 4.440820] usb usb2: Manufacturer: Linux 5.10.0-3-arm64 xhci-hcd [ 4.440825] usb usb2: SerialNumber: 0000:01:00.0 [ 4.441792] hub 2-0:1.0: USB hub found [ 4.441844] hub 2-0:1.0: 4 ports detected [ 4.442127] dwc2 fe980000.usb: supply vusb_a not found, using dummy regulator [ 4.450995] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 4.457724] libphy: bcmgenet MII bus: probed [ 4.467207] mmc0: queuing unknown CIS tuple 0x80 (3 bytes) [ 4.507364] mmc1: new ultra high speed DDR50 SDHC card at address 0007 [ 4.544675] dwc2 fe980000.usb: EPs: 8, dedicated fifos, 4080 entries in SPRAM [ 4.546583] mmcblk1: mmc1:0007 SD32G 29.0 GiB [ 4.552766] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus [ 4.561929] mmcblk1: p1 p2 p3 [ 4.622271] random: fast init done [ 4.684921] mmc0: new high speed SDIO card at address 0001 [ 4.760615] raid6: neonx8 gen() 1758 MB/s [ 4.772636] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 4.832608] raid6: neonx8 xor() 1269 MB/s [ 4.904609] raid6: neonx4 gen() 1839 MB/s [ 4.931234] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21 [ 4.937484] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 4.943690] usb 1-1: Product: USB2.0 Hub [ 4.952160] hub 1-1:1.0: USB hub found [ 4.958652] hub 1-1:1.0: 4 ports detected [ 4.976605] raid6: neonx4 xor() 1332 MB/s [ 5.048615] raid6: neonx2 gen() 1588 MB/s [ 5.120599] raid6: neonx2 xor() 1198 MB/s [ 5.192611] raid6: neonx1 gen() 1192 MB/s [ 5.260631] usb 1-1.3: new low-speed USB device number 3 using xhci_hcd [ 5.264600] raid6: neonx1 xor() 929 MB/s [ 5.340607] raid6: int64x8 gen() 1011 MB/s [ 5.371355] usb 1-1.3: New USB device found, idVendor=15ca, idProduct=00c3, bcdDevice= 5.12 [ 5.377480] usb 1-1.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 5.383610] usb 1-1.3: Product: USB Optical Mouse [ 5.404952] hid: raw HID events driver (C) Jiri Kosina [ 5.412626] raid6: int64x8 xor() 561 MB/s [ 5.423807] usbcore: registered new interface driver usbhid [ 5.429880] usbhid: USB HID core driver [ 5.443009] input: USB Optical Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:15CA:00C3.0001/input/input0 [ 5.449763] hid-generic 0003:15CA:00C3.0001: input,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:01:00.0-1.3/input0 [ 5.476646] usb 1-1.4: new low-speed USB device number 4 using xhci_hcd [ 5.484618] raid6: int64x4 gen() 1030 MB/s [ 5.556603] raid6: int64x4 xor() 567 MB/s [ 5.604768] usb 1-1.4: New USB device found, idVendor=1a2c, idProduct=4324, bcdDevice= 1.10 [ 5.611131] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.617411] usb 1-1.4: Product: USB Keyboard [ 5.623637] usb 1-1.4: Manufacturer: SEM [ 5.628623] raid6: int64x2 gen() 956 MB/s [ 5.639531] input: SEM USB Keyboard as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:1A2C:4324.0002/input/input1 [ 5.700612] raid6: int64x2 xor() 509 MB/s [ 5.709158] hid-generic 0003:1A2C:4324.0002: input,hidraw1: USB HID v1.10 Keyboard [SEM USB Keyboard] on usb-0000:01:00.0-1.4/input0 [ 5.721599] input: SEM USB Keyboard Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:1A2C:4324.0003/input/input2 [ 5.772618] raid6: int64x1 gen() 730 MB/s [ 5.788785] input: SEM USB Keyboard System Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:1A2C:4324.0003/input/input3 [ 5.796285] hid-generic 0003:1A2C:4324.0003: input,hidraw2: USB HID v1.10 Device [SEM USB Keyboard] on usb-0000:01:00.0-1.4/input1 [ 5.844603] raid6: int64x1 xor() 379 MB/s [ 5.851972] raid6: using algorithm neonx4 gen() 1839 MB/s [ 5.859312] raid6: .... xor() 1332 MB/s, rmw enabled [ 5.866626] raid6: using neon recovery algorithm [ 5.876164] xor: measuring software checksum speed [ 5.887499] 8regs : 2526 MB/sec [ 5.898194] 32regs : 2903 MB/sec [ 5.909159] arm64_neon : 2637 MB/sec [ 5.916280] xor: using function: 32regs (2903 MB/sec) [ 6.015883] Btrfs loaded, crc32c=crc32c-generic [ 6.283491] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 6.553245] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 6.894066] systemd[1]: System time before build time, advancing clock. [ 6.940715] systemd[1]: Inserted module 'autofs4' [ 7.011268] systemd[1]: systemd 247.2-5 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 7.027239] systemd[1]: Detected architecture arm64. [ 7.073366] systemd[1]: Set hostname to <raspi4test>. [ 7.616291] systemd[1]: Queued start job for default target Graphical Interface. [ 7.625273] random: systemd: uninitialized urandom read (16 bytes read) [ 7.636835] systemd[1]: Created slice system-getty.slice. [ 7.653482] random: systemd: uninitialized urandom read (16 bytes read) [ 7.662679] systemd[1]: Created slice system-modprobe.slice. [ 7.678978] random: systemd: uninitialized urandom read (16 bytes read) [ 7.688467] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 7.706432] systemd[1]: Created slice system-wpa_supplicant.slice. [ 7.724148] systemd[1]: Created slice User and Session Slice. [ 7.740796] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 7.757472] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 7.774884] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 7.791931] systemd[1]: Reached target Local Encrypted Volumes. [ 7.809079] systemd[1]: Reached target Paths. [ 7.826277] systemd[1]: Reached target Remote File Systems. [ 7.843604] systemd[1]: Reached target Slices. [ 7.861694] systemd[1]: Listening on Syslog Socket. [ 7.879491] systemd[1]: Listening on fsck to fsckd communication Socket. [ 7.897225] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 7.915590] systemd[1]: Listening on Journal Audit Socket. [ 7.933573] systemd[1]: Listening on Journal Socket (/dev/log). [ 7.951258] systemd[1]: Listening on Journal Socket. [ 7.969011] systemd[1]: Listening on Network Service Netlink Socket. [ 7.986834] systemd[1]: Listening on udev Control Socket. [ 8.004361] systemd[1]: Listening on udev Kernel Socket. [ 8.026116] systemd[1]: Mounting Huge Pages File System... [ 8.047703] systemd[1]: Mounting POSIX Message Queue File System... [ 8.068755] systemd[1]: Mounting Kernel Debug File System... [ 8.089731] systemd[1]: Mounting Kernel Trace File System... [ 8.111970] systemd[1]: Starting Restore / save the current clock... [ 8.132909] systemd[1]: Starting Set the console keyboard layout... [ 8.154190] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.175943] systemd[1]: Starting Load Kernel Module configfs... [ 8.199520] systemd[1]: Starting Load Kernel Module drm... [ 8.221898] systemd[1]: Starting Load Kernel Module fuse... [ 8.262713] fuse: init (API version 7.32) [ 8.266478] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.278704] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.294808] systemd[1]: Starting Journal Service... [ 8.320100] systemd[1]: Starting Load Kernel Modules... [ 8.341999] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.363824] systemd[1]: Starting Coldplug All udev Devices... [ 8.391484] systemd[1]: Mounted Huge Pages File System. [ 8.399445] EXT4-fs (mmcblk1p2): re-mounted. Opts: discard [ 8.419432] systemd[1]: Mounted POSIX Message Queue File System. [ 8.436894] systemd[1]: Mounted Kernel Debug File System. [ 8.453454] systemd[1]: Mounted Kernel Trace File System. [ 8.471233] systemd[1]: Finished Restore / save the current clock. [ 8.490356] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.508398] systemd[1]: modprobe@configfs.service: Succeeded. [ 8.517389] systemd[1]: Finished Load Kernel Module configfs. [ 8.535093] systemd[1]: modprobe@drm.service: Succeeded. [ 8.543908] systemd[1]: Finished Load Kernel Module drm. [ 8.561398] systemd[1]: modprobe@fuse.service: Succeeded. [ 8.570401] systemd[1]: Finished Load Kernel Module fuse. [ 8.588250] systemd[1]: Finished Set the console keyboard layout. [ 8.605587] systemd[1]: Finished Load Kernel Modules. [ 8.621192] systemd[1]: Started Journal Service. [ 9.562584] vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 9.583866] iproc-rng200 fe104000.rng: hwrng registered [ 9.590534] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 9.766831] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 9.778462] bcm2835_audio bcm2835_audio: card created with 8 channels [ 9.812003] Module vc4 is blacklisted [ 9.829895] mc: Linux media interface: v0.10 [ 9.886144] videodev: Linux video capture interface: v2.00 [ 9.946637] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 9.953544] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 9.961277] cfg80211: Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf' [ 9.961744] cfg80211: Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' [ 9.962146] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 9.963112] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [ 9.969548] alg: No test for fips(ansi_cprng) (fips_ansi_cprng) [ 9.975757] platform regulatory.0: firmware: direct-loading firmware regulatory.db [ 9.992266] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s [ 10.019823] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 10.022820] usbcore: registered new interface driver brcmfmac [ 10.108554] brcmfmac mmc0:0001:1: firmware: direct-loading firmware brcm/brcmfmac43455-sdio.bin [ 10.109403] Adding 1048572k swap on /dev/mmcblk1p3. Priority:-2 extents:1 across:1048572k SSDscFS [ 10.115915] brcmfmac mmc0:0001:1: firmware: direct-loading firmware brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.txt [ 10.121282] cryptd: max_cpu_qlen set to 1000 [ 10.204696] random: crng init done [ 10.207695] random: 7 urandom warning(s) missed due to ratelimiting [ 10.230685] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 10.233668] brcmfmac mmc0:0001:1: firmware: failed to load brcm/brcmfmac43455-sdio.clm_blob (-2) [ 10.236509] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware [ 10.240415] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available [ 10.244229] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Mar 1 2015 07:29:38 version 7.45.18 (r538002) FWID 01-6a2c8ad4 [ 10.463152] Bluetooth: Core ver 2.22 [ 10.467319] NET: Registered protocol family 31 [ 10.471252] Bluetooth: HCI device and connection manager initialized [ 10.475182] Bluetooth: HCI socket layer initialized [ 10.479154] Bluetooth: L2CAP socket layer initialized [ 10.483188] Bluetooth: SCO socket layer initialized [ 10.518309] Bluetooth: HCI UART driver ver 2.3 [ 10.522282] Bluetooth: HCI UART protocol H4 registered [ 10.526483] Bluetooth: HCI UART protocol LL registered [ 10.526489] Bluetooth: HCI UART protocol ATH3K registered [ 10.526523] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 10.526719] Bluetooth: HCI UART protocol Intel registered [ 10.526847] Bluetooth: HCI UART protocol Broadcom registered [ 10.526879] Bluetooth: HCI UART protocol QCA registered [ 10.526882] Bluetooth: HCI UART protocol AG6XX registered [ 10.526907] Bluetooth: HCI UART protocol Marvell registered [ 10.550024] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator [ 10.559514] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator [ 10.676762] uart-pl011 fe201000.serial: no DMA platform data [ 10.917252] Bluetooth: hci0: BCM: chip id 107 [ 10.920081] Bluetooth: hci0: BCM: features 0x2f [ 10.924376] Bluetooth: hci0: BCM4345C0 [ 10.927308] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000 [ 10.930424] bluetooth hci0: firmware: failed to load brcm/BCM4345C0.hcd (-2) [ 10.933394] bluetooth hci0: firmware: failed to load brcm/BCM.hcd (-2) [ 10.936383] Bluetooth: hci0: BCM: firmware Patch file not found, tried: [ 10.939459] Bluetooth: hci0: BCM: 'brcm/BCM4345C0.hcd' [ 10.942035] Bluetooth: hci0: BCM: 'brcm/BCM.hcd' [ 16.448981] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready ** Model information Device Tree model: Raspberry Pi 4 Model B Rev 1.4 ** Loaded modules: hci_uart(E) btqca(E) btrtl(E) btbcm(E) btintel(E) btsdio(E) nls_ascii(E) nls_cp437(E) bluetooth(E) vfat(E) fat(E) jitterentropy_rng(E) aes_neon_bs(E) aes_neon_blk(E) crypto_simd(E) cryptd(E) brcmfmac(E) drbg(E) brcmutil(E) bcm2835_v4l2(CE) bcm2835_mmal_vchiq(CE) videobuf2_vmalloc(E) videobuf2_memops(E) videobuf2_v4l2(E) aes_arm64(E) aes_generic(E) cfg80211(E) videobuf2_common(E) ansi_cprng(E) videodev(E) ecdh_generic(E) rfkill(E) mc(E) joydev(E) evdev(E) ecc(E) snd_bcm2835(CE) libaes(E) snd_soc_core(E) snd_pcm_dmaengine(E) snd_pcm(E) snd_timer(E) snd(E) pwm_bcm2835(E) bcm2835_wdt(E) bcm2711_thermal(E) iproc_rng200(E) soundcore(E) rng_core(E) vchiq(CE) cec(E) drm_kms_helper(E) cpufreq_dt(E) leds_gpio(E) drm(E) fuse(E) configfs(E) ip_tables(E) x_tables(E) autofs4(E) ext4(E) crc16(E) mbcache(E) jbd2(E) btrfs(E) blake2b_generic(E) xor(E) xor_neon(E) hid_generic(E) usbhid(E) hid(E) raid6_pq(E) libcrc32c(E) crc32c_generic(E) broadcom(E) bcm_phy_lib(E) mdio_bcm_unimac(E) dwc2(E) xhci_pci(E) udc_core(E) roles(E) xhci_hcd(E) crct10dif_ce(E) raspberrypi_cpufreq(E) reset_raspberrypi(E) crct10dif_common(E) sdhci_iproc(E) usbcore(E) i2c_bcm2835(E) sdhci_pltfm(E) usb_common(E) genet(E) of_mdio(E) fixed(E) fixed_phy(E) libphy(E) gpio_regulator(E) sdhci(E) phy_generic(E) ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether dc:a6:32:bb:99:d9 brd ff:ff:ff:ff:ff:ff 3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether dc:a6:32:bb:99:da brd ff:ff:ff:ff:ff:ff inet 192.168.1.83/24 brd 192.168.1.255 scope global dynamic wlan0 valid_lft 42957sec preferred_lft 42957sec inet6 2400:4050:2ba1:ac00:dea6:32ff:febb:99da/64 scope global dynamic mngtmpaddr noprefixroute valid_lft 14155sec preferred_lft 12355sec inet6 fe80::dea6:32ff:febb:99da/64 scope link valid_lft forever preferred_lft forever *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 eth0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 wlan0: 660470 1329 0 0 0 0 0 4 248872 1011 0 0 0 0 0 0 ** PCI devices: 00:00.0 PCI bridge [0604]: Broadcom Inc. and subsidiaries BCM2711 PCIe Bridge [14e4:2711] (rev 10) (prog-if 00 [Normal decode]) Device tree node: /sys/firmware/devicetree/base/scb/pcie@7d500000/pci@1,0 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 50 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00000000-00000fff [size=4K] Memory behind bridge: f8000000-f80fffff [size=1M] Prefetchable memory behind bridge: [disabled] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [48] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold-) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME- Capabilities: [ac] Express (v2) Root Port (Slot-), MSI 00 DevCap: MaxPayload 512 bytes, PhantFunc 0 ExtTag- RBE+ DevCtl: CorrErr+ NonFatalErr+ FatalErr+ UnsupReq+ RlxdOrd+ ExtTag- PhantFunc- AuxPwr+ NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <1us, L1 <2us ClockPM+ Surprise- LLActRep- BwNot+ ASPMOptComp+ LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 5GT/s (ok), Width x1 (ok) TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt+ RootCap: CRSVisible+ RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible+ RootSta: PME ReqID 0000, PMEStatus- PMEPending- DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ NROPrPrP- LTR+ 10BitTagComp- 10BitTagReq- OBFF Via WAKE#, ExtFmt- EETLPPrefix- EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit- FRS- LN System CLS Not Supported, TPHComp- ExtTPHComp- ARIFwd- AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR+ OBFF Disabled, ARIFwd- AtomicOpsCtl: ReqEn- EgressBlck- LnkCap2: Supported Link Speeds: 2.5-5GT/s, Crosslink- Retimer- 2Retimers- DRS+ LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1- EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest- Retimer- 2Retimers- CrosslinkRes: unsupported, DRS- DownstreamComp: Link Down - Not Determined Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn- MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap- HeaderLog: 00000000 00000000 00000000 00000000 RootCmd: CERptEn+ NFERptEn+ FERptEn+ RootSta: CERcvd- MultCERcvd- UERcvd- MultUERcvd- FirstFatal- NonFatalMsg- FatalMsg- IntMsg 0 ErrorSrc: ERR_COR: 0000 ERR_FATAL/NONFATAL: 0000 Capabilities: [180 v1] Vendor Specific Information: ID=0000 Rev=0 Len=028 <?> Capabilities: [240 v1] L1 PM Substates L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+ PortCommonModeRestoreTime=8us PortTPowerOnTime=10us L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2- ASPM_L1.1- T_CommonMode=1us LTR1.2_Threshold=0ns L1SubCtl2: T_PwrOn=10us Kernel driver in use: pcieport 01:00.0 USB controller [0c03]: VIA Technologies, Inc. VL805 USB 3.0 Host Controller [1106:3483] (rev 01) (prog-if 30 [XHCI]) Subsystem: VIA Technologies, Inc. VL805 USB 3.0 Host Controller [1106:3483] Device tree node: /sys/firmware/devicetree/base/scb/pcie@7d500000/pci@1,0/usb@1,0 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 51 Region 0: Memory at 600000000 (64-bit, non-prefetchable) [size=4K] Capabilities: [80] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot-,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [90] MSI: Enable+ Count=1/4 Maskable- 64bit+ Address: 00000000fffffffc Data: 6540 Capabilities: [c4] Express (v2) Endpoint, MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 0.000W DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr+ TransPend- LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <2us, L1 <16us ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp- LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes, Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 5GT/s (ok), Width x1 (ok) TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Range B, TimeoutDis+ NROPrPrP- LTR- 10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix- EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit- FRS- TPHComp- ExtTPHComp- AtomicOpsCap: 32bit- 64bit- 128bitCAS- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- OBFF Disabled, AtomicOpsCtl: ReqEn- LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis+ Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete- EqualizationPhase1- EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest- Retimer- 2Retimers- CrosslinkRes: unsupported Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn- MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap- HeaderLog: 00000000 00000000 00000000 00000000 Kernel driver in use: xhci_hcd Kernel modules: xhci_pci ** USB devices: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 1a2c:4324 China Resource Semico Co., Ltd USB Keyboard Bus 001 Device 003: ID 15ca:00c3 Textech International Ltd. Mini Optical Mouse Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: bullseye/sid Architecture: arm64 (aarch64) Kernel: Linux 5.10.0-3-arm64 (SMP w/4 CPU threads) Kernel taint flags: TAINT_CRAP, TAINT_UNSIGNED_MODULE Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE not set Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages linux-image-5.10.0-3-arm64-unsigned depends on: ii initramfs-tools [linux-initramfs-tool] 0.139 ii kmod 28-1 ii linux-base 4.6 Versions of packages linux-image-5.10.0-3-arm64-unsigned recommends: pn apparmor <none> ii firmware-linux-free 20200122-1 Versions of packages linux-image-5.10.0-3-arm64-unsigned suggests: pn debian-kernel-handbook <none> pn linux-doc-5.10 <none> Versions of packages linux-image-5.10.0-3-arm64-unsigned is related to: pn firmware-amd-graphics <none> pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> ii firmware-brcm80211 20201218-3 pn firmware-cavium <none> pn firmware-intel-sound <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux-nonfree <none> ii firmware-misc-nonfree 20201218-3 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-realtek <none> pn firmware-samsung <none> pn firmware-siano <none> pn firmware-ti-connectivity <none> pn xen-hypervisor <none> -- no debconf information
--- End Message ---
--- Begin Message ---
- To: 981616-done@bugs.debian.org
- Subject: Re: Bug#985632: Bug#981616: RPi4B 5GHz WiFi problems #985632 & #981616 completely went away by replacing brcmfmac43455-sdio.bin and brcmfmac43455-sdio.clm_blob
- From: Diederik de Haas <didi.debian@cknow.org>
- Date: Sun, 21 Jan 2024 15:50:08 +0100
- Message-id: <58825630.5iRxLm7csj@bagend>
- In-reply-to: <13128608.dW097sEU6C@bagend>
- References: <161224945154.507.10381361634968696152.reportbug@raspi4test> <161628838519.3549.2812076758045793759.reportbug@raspi4b8gb> <13128608.dW097sEU6C@bagend>
On Saturday, 29 October 2022 01:38:41 CET Diederik de Haas wrote: > There have been several firmware releases since, including the (very) recent > version 20220913-1. Could you update both bug with updated firmware? No response in over a year, thus closing. Feel free to reopen it if you can still reproduce it with current kernel and firmware and please do share the used versions and f.e. dmesg output.Attachment: signature.asc
Description: This is a digitally signed message part.
--- End Message ---