[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#1035587: marked as done (linux: broken AHCI controller on MIPS Loongson 3 (regression from 5.10.162-1))



Your message dated Sun, 14 Jan 2024 19:48:12 +0000
with message-id <E1rP6Sq-001V5M-Av@fasolo.debian.org>
and subject line Bug#1035587: fixed in linux 5.10.205-1
has caused the Debian Bug report #1035587,
regarding linux: broken AHCI controller on MIPS Loongson 3 (regression from 5.10.162-1)
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
1035587: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1035587
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Source: linux
Version: 5.10.178-3
Severity: important
X-Debbugs-Cc: dsa@debian.org, debian-mips@lists.debian.org, syq@debian.org

Following the point release, the buildd mipsel-osuosl-03.d.o does not
boot anymore, with errors in the AHCI controller:

[   35.912147] ata4.00: exception Emask 0x0 SAct 0x20000000 SErr 0x0 action 0x6 frozen
[   35.919769] ata4.00: failed command: WRITE FPDMA QUEUED
[   35.924968] ata4.00: cmd 61/20:e8:00:f0:e1/00:00:00:00:00/40 tag 29 ncq dma 16384 out
[   35.924968]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[   35.940097] ata4.00: status: { DRDY }
[   35.943743] ata4: hard resetting link

While that initially looks like a hardware issue, it appears that
reverting the kernel to 5.10.162-1 (from 5.10.178-3) fixes the issue.
Strangely mipsel.osuosl-05.d.o, which seems to be similar hardware (CPU,
motherboard and SATA drive), does not exhibit the same issue.

You'll find attached the output of /proc/cpuinfo, lspci and the full
boot log.
PMON2000 MIPS Initializing. Standby...

node 0 N Voltage  write :
v ctrl err

node 0 N Voltage  read :
00080760uV 

node 0 P Voltage write :

0xbfe00190  : 00005282a9b7b7a7
CPU CLK SEL : 00000002
MEM CLK SEL : 00000014
HT CLK SEL : 00000014
Disable HT0 clock
Change the scale of HT1 clock
Change the scale of LS132 clock

BBGEN start  :
BBGEN config value  :00ff6431
Soft CLK SEL adjust begin
CORE & NODE:
Miku MAGIC Mismtach
04110c85
MEM       :0909017b
fdcoefficient  :00000004
HT    :00000000
SYS_LOOPC:00000012

DDR_LOOPC:00000024
NO TLB cache init ...
Jump to 9fc
32 bit PCI space translate to 64 bit HT space

Check HT bus up.
01110020
set LS7A MISC and confbus base address done.
3A HT in soft freq cfg mode...ok
7A HT in soft freq cfg mode...ok

PLL check success.
Wait HT bus up.01110020>
01110020
Set 7A side HT:
Set width
11110020
Set Freq
82251060
Set soft config
008a810a
Set Gen3 mode
81237008
Set retry mode
00000081
Enable scrambling
00000078
set buffer num
0fffffff
Set CPU side HT:
Set width
11110020
Set Freq
82250060
Set soft config
0087c10a
Set GEN3 mode
81237008
Set retry mode
00000081
Enable scrambling
00000078
Reset Node 0 HT1-lo bus
00400000
Wait HT bus down.>
11110010

Dereset Node 0 HT1 bus
00000000
Wait HT bus up.>
11110020

After reconnect, PLL check success.
Checking Node 0 HT1 CRC error.>
Checking Bridge HT CRC error bit.>
LS3A-7A linkup.
Disable ht regs.

Start Init Memory, wait a while......
NODE 0 MEMORY CONFIG BEGIN

Lock Scache
Lock Scache Done.

Probing DDR MC0 SLOT: 
Slot 0: s1 = 0x00114008__c3004000

Slot 1: s1 = 0x00000000__00000000

 T5 s1 = 00114008__c3005f00

 t0 = 0x00000000__00000000

Enable register space of MEMORY

init start
908:000f0f0300e1e1c1
 begin Reset MC 
init start
908:000f0f0300e1e1c1
 begin Reset MC 
init start
908:000f200300e1e1c1
 begin Reset MC 
init start
908:0016050a00e1e1c1
 begin Reset MC 
init start
908:001e0c0000e1e1c1
 begin Reset MC 
init start
908:001b0a0f00e1e1c1
 begin Reset MC 
init start
908:000f0f0200e1e1c1
 begin Reset MC 
init start
908:00200f1400e1e1c1
 begin Reset MC 
init start
908:0007070c00e1e1c1
 begin Reset MC 
init start
908:000f200300e1e1c1
 begin Reset MC 
init start
908:00200f0200e1e1c1
 begin Reset MC 
init start
908:0016160a00e1e1c1
 begin Reset MC 
init start
908:000c0c1100e1e1c1
 begin Reset MC 
init start
908:000f200200e1e1c1
 begin Reset MC 
init start
908:000c0c0000e1e1c1
 begin Reset MC 
init start
908:000f0f1300e1e1c1
 begin Reset MC 
init start
908:000c1e0100e1e1c1
 begin Reset MC 
init start
908:000c0c0000e1e1c1
 begin Reset MC 
init start
908:000a0a0f00e1e1c1
 begin Reset MC 
init start
908:0005050a00e1e1c1
init done
Start Hard Leveling...
Enable register space of MEMORY

start training of tPHY_WR

tPHY_WRLAT training successThe MC param after leveling is:
PHY:
00000000:  0000000000000011
00000008:  0000000000000037
00000010:  0000000000000103
00000018:  0000000000000000
00000020:  0000000000000001
00000028:  0000000000000000
00000030:  0052010100040510
00000038:  0000000000000144
00000040:  000000080000002a
00000048:  02041c3801010100
00000050:  000000080000002a
00000058:  02041c3800000000
00000060:  000000080000002a
00000068:  02041c3800000000
00000070:  000000080000002a
00000078:  03041c3800010100
00000080:  000000080000002a
00000088:  02041c3800000000
00000090:  000000080000002a
00000098:  02041c3800000000
000000a0:  000000080000002a
000000a8:  02041c3800000000
000000b0:  000000080000002a
000000b8:  03041c3800010100
000000c0:  000000080000002a
000000c8:  02041c3800000000
000000d0:  000000080000002a
000000d8:  02041c3800000000
000000e0:  00000001ff000f00
000000e8:  00000001ff000f00
000000f0:  00000001ff000f00
000000f8:  00000001ff000f00
00000100:  0000000016002016
00000108:  00000000001c1918
00000110:  8204008800000080
00000118:  0000000000140003
00000120:  0000000000000000
00000128:  0000000000000000
00000130:  0000000000000000
00000138:  0000000000000000
00000140:  0000000000000000
00000148:  0000000000000000
00000150:  0000000002000202
00000158:  0000000000000000
00000160:  0002000002020202
00000168:  0000000000000000
00000170:  0000000000000000
00000178:  0000000000000000
00000180:  0000000025002025
00000188:  00000000001a1918
00000190:  8204008800000080
00000198:  0000000000140003
000001a0:  0000000000000000
000001a8:  0000000000000000
000001b0:  0000000000000000
000001b8:  0000000000000000
000001c0:  0000000000000000
000001c8:  0000000000000000
000001d0:  0202000200020202
000001d8:  0000000000000000
000001e0:  0002000200020202
000001e8:  0000000000000000
000001f0:  0000000000000000
000001f8:  0000000000000000
00000200:  0000000039002039
00000208:  0000000000031918
00000210:  8204008800000080
00000218:  0000000000140003
00000220:  0000000000000000
00000228:  0000000000000000
00000230:  0000000000000000
00000238:  0000000000000000
00000240:  0000000000000000
00000248:  0000000000000000
00000250:  0000000002000200
00000258:  0000000000000000
00000260:  0000000002000200
00000268:  0000000000000000
00000270:  0000000000000000
00000278:  0000000000000000
00000280:  0000000049002049
00000288:  00000000007b1918
00000290:  8204008800000080
00000298:  0000000000000000
000002a0:  0000000000000000
000002a8:  0000000000000000
000002b0:  0000000000000000
000002b8:  0000000000000000
000002c0:  0000000000000000
000002c8:  0000000000000000
000002d0:  0002000002000202
000002d8:  0000000000000000
000002e0:  0002000202020202
000002e8:  0000000000000000
000002f0:  0000000000000000
000002f8:  0000000000000000
00000300:  0000000078002078
00000308:  0000000000751918
00000310:  8204008800000080
00000318:  0000000000000000
00000320:  0000000000000000
00000328:  0000000000000000
00000330:  0000000000000000
00000338:  0000000000000000
00000340:  0000000000000000
00000348:  0000000000000000
00000350:  0000020002000202
00000358:  0000000000000000
00000360:  0002020202020202
00000368:  0000000000000000
00000370:  0000000000000000
00000378:  0000000000000000
00000380:  000000000b00200b
00000388:  0000000000681918
00000390:  8204008800000080
00000398:  0000000000150000
000003a0:  0101010101010001
000003a8:  0000000000000000
000003b0:  0000000000000000
000003b8:  0000000000000000
000003c0:  0000000000000000
000003c8:  0000000000000000
000003d0:  0002000002000202
000003d8:  0000000000000000
000003e0:  0002000000020202
000003e8:  0000000000000000
000003f0:  0000000000000000
000003f8:  0000000000000000
00000400:  0000000011002111
00000408:  0000000000731918
00000410:  8204008800000080
00000418:  0000000000150000
00000420:  0000000000010101
00000428:  0000000000000000
00000430:  0000000000000000
00000438:  0000000000000000
00000440:  0000000000000000
00000448:  0000000000000000
00000450:  0002000002000202
00000458:  0000000000000000
00000460:  0000000002000200
00000468:  0000000000000000
00000470:  0000000000000000
00000478:  0000000000000000
00000480:  0000000019002019
00000488:  00000000007f1918
00000490:  8204008800000080
00000498:  0000000000150000
000004a0:  0000000000000000
000004a8:  0000000000000000
000004b0:  0000000000000000
000004b8:  0000000000000000
000004c0:  0000000000000000
000004c8:  0000000000000000
000004d0:  0000000002000200
000004d8:  0000000000000000
000004e0:  0002000002020200
000004e8:  0000000000000000
000004f0:  0000000000000000
000004f8:  0000000000000000
00000500:  0000000000002000
00000508:  0000000000001919
00000510:  8204008800000080
00000518:  0000000000000000
00000520:  0000000000000000
00000528:  0000000000000000
00000530:  0000000000000000
00000538:  0000000000000000
00000540:  0000000000000000
00000548:  0000000000000000
00000550:  0000000000000000
00000558:  0000000000000000
00000560:  0000000000000000
00000568:  0000000000000000
00000570:  0000000000000000
00000578:  0000000000000000
00000580:  0000000000000000
00000588:  0000000000000000
00000590:  0000000000000000
00000598:  0000000000000000
000005a0:  0000000000000000
000005a8:  0000000000000000
000005b0:  0000000000000000
000005b8:  0000000000000000
000005c0:  0000000000000000
000005c8:  0000000000000000
000005d0:  0000000000000000
000005d8:  0000000000000000
000005e0:  0000000000000000
000005e8:  0000000000000000
000005f0:  0000000000000000
000005f8:  0000000000000000
00000600:  0000000000000000
00000608:  0000000000000000
00000610:  0000000000000000
00000618:  0000000000000000
00000620:  0000000000000000
00000628:  0000000000000000
00000630:  0000000000000000
00000638:  0000000000000000
00000640:  0000000000000000
00000648:  0000000000000000
00000650:  0000000000000000
00000658:  0000000000000000
00000660:  0000000000000000
00000668:  0000000000000000
00000670:  0000000000000000
00000678:  0000000000000000
00000680:  0000000000000000
00000688:  0000000000000000
00000690:  0000000000000000
00000698:  0000000000000000
000006a0:  0000000000000000
000006a8:  0000000000000000
000006b0:  0000000000000000
000006b8:  0000000000000000
000006c0:  0000000000000000
000006c8:  0000000000000000
000006d0:  0000000000000000
000006d8:  0000000000000000
000006e0:  0000000000000000
000006e8:  0000000000000000
000006f0:  0000000000000000
000006f8:  0000000000000000
00000700:  0000000001300000
00000708:  0000000000000100
00000710:  0000000000000000
00000718:  0000000000000000
00000720:  0000000000000000
00000728:  0000000000000000
00000730:  0000000000000000
00000738:  0000000000000000
00000740:  0000000000000000
00000748:  0000000000000000
00000750:  0000000000000000
00000758:  0000000000000000
00000760:  0000000000000000
00000768:  0000000000000000
00000770:  0000000000000000
00000778:  0000000000000000
00000780:  0000000000000000
00000788:  0000000000000000
00000790:  0000000000000000
00000798:  0000000000000000
000007a0:  0000000000000000
000007a8:  0000000000000000
000007b0:  0000000000000000
000007b8:  0000000000000000
000007c0:  0000000000000000
000007c8:  0000000000000000
000007d0:  0000000000000000
000007d8:  0000000000000000
000007e0:  0000000000000000
000007e8:  0000000000000000
000007f0:  0000000000000000
000007f8:  0000000000000000
00000800:  0506647f0026d2df
00000808:  000201010003ed79
00000810:  0a01098109a108a1
00000818:  08a109c109010901
00000820:  0000000000000661
00000828:  0000000000000000
00000830:  0000032b00000b42
00000838:  0000000000000000
00000840:  89bf89bf89bf89bf
00000848:  89bf89bf89bf89bf
00000850:  00000000000089bf
00000858:  0000000000008900
00000860:  0000000000008900
00000868:  0000000000008900
00000870:  0000000000008900
00000878:  0000000000008900
00000880:  0000000000008900
00000888:  0000000000008900
00000890:  0000000000008900
00000898:  0000000000008900
000008a0:  0000000000008900
000008a8:  0000000000008900
000008b0:  0000000000008900
000008b8:  0000000000008900
000008c0:  0000000000008900
000008c8:  0000000000008900
000008d0:  0000000000008900
000008d8:  0000000000008900
000008e0:  0000000000008900
000008e8:  0000000000008900
000008f0:  0000000000008900
000008f8:  0000000000008900
00000900:  00000000f0000000
00000908:  0005050a00e1e1c1

CTRL:
00001000:  000b201801206228
00001008:  000000000000000a
00001010:  0186a00001180186
00001018:  050301200000000f
00001020:  0000000010041405
00001028:  0000000062028004
00001030:  0000000000000000
00001038:  0000000000000000
00001040:  0b0405040000001a
00001048:  00000006100c2214
00001050:  060a020600060405
00001058:  0000000000000000
00001060:  000004090009120b
00001068:  0000000000000000
00001070:  0000000000000000
00001078:  0000000000000402
00001080:  0000000000000402
00001088:  0000000000000000
00001090:  0000000000000000
00001098:  0000000404000404
000010a0:  0000000000000000
000010a8:  0000000000000000
000010b0:  0000000000000000
000010b8:  0000000000000000
000010c0:  0000000000000000
000010c8:  0000000000000000
000010d0:  0000000000000000
000010d8:  0000000000000000
000010e0:  0000000000000000
000010e8:  0000000000000000
000010f0:  0000000000000000
000010f8:  0000000000000000
00001100:  0000010101010101
00001108:  0000000100000000
00001110:  0000000000000000
00001118:  0000000000000000
00001120:  0100010008000000
00001128:  ff000200030000fe
00001130:  0000000000000000
00001138:  0000000000000000
00001140:  0000001800060d60
00001148:  0000001800040d60
00001150:  0000001800040d60
00001158:  0000001800040d60
00001160:  0000001800040d60
00001168:  0000001800040d60
00001170:  0000001800040d60
00001178:  0000001800040d60
00001180:  0200000005010210
00001188:  0000040004800000
00001190:  0200000005010210
00001198:  0000040004800000
000011a0:  0200000005010210
000011a8:  0000040004800000
000011b0:  0200000005010210
000011b8:  0000040004800000
000011c0:  0200000005010210
000011c8:  0000040004800000
000011d0:  0200000005010210
000011d8:  0000040004800000
000011e0:  0200000005010210
000011e8:  0000040004800000
000011f0:  0200000005010210
000011f8:  0000040004800000
00001200:  0000010003140400
00001208:  0000000000200000
00001210:  0000000000000000
00001218:  0000000000000000
00001220:  0fff00000ff00000
00001228:  0000000000000000
00001230:  0000030300010202
00001238:  0000000f00000000
00001240:  0f28100001010101
00001248:  0000000000ff010f
00001250:  0000000000000080
00001258:  0055004400330022
00001260:  0000000000000000
00001268:  0000000000000000
00001270:  0000000000000000
00001278:  0000000000000000
00001280:  0100000000000000
00001288:  0000000000000000
00001290:  0000000000000000
00001298:  0000000000000000
000012a0:  0000000000000000
000012a8:  0000000000000000
000012b0:  0000000000000000
000012b8:  0000000000000000
000012c0:  0000000000000000
000012c8:  0000000000000000
000012d0:  0000000000000000
000012d8:  0000000000000000
000012e0:  0000000000000000
000012e8:  0000000000000000
000012f0:  0000000000000000
000012f8:  0000000000000000
00001300:  0000000000000703
00001308:  0000000000000000
00001310:  0000000000000000
00001318:  0000000000000000
00001320:  0000000000000000
00001328:  0000000000000000
00001330:  0000000000000000
00001338:  0000000000000000
00001340:  0000000000000000
00001348:  0000000000000000
00001350:  0018001400140010
00001358:  0000000000000008
00001360:  0000000000000000
00001368:  0000000000000000
00001370:  0000000000000000
00001378:  0000000000000000
00001380:  000000000000000f
00001388:  0000000000000001
00001390:  000000000000000a
00001398:  0000000000000000
000013a0:  0000000000000000
000013a8:  0000000000000000
000013b0:  0000000000000000
000013b8:  0000000000000000
000013c0:  0000000000000001
000013c8:  0000000000000600
000013d0:  0000000000000000
000013d8:  0000000000000000
000013e0:  0000000000000000
000013e8:  0000000000000000
000013f0:  0000000000000000
000013f8:  0000000000000000
00001400:  0000000824083010
00001408:  0000000000000000
00001410:  0000000000000000
00001418:  0000000000000000
00001420:  0000000000000000
00001428:  0000000000000000
00001430:  0000000000000000
00001438:  0000000000000000
00001440:  0000000000010307
00001448:  0000000000000000
00001450:  0000000000000000
00001458:  0000000000000000
00001460:  0000000000000000
00001468:  0000000000000000
00001470:  0000000000000000
00001478:  0000000000000000
00001480:  0000000000000000
00001488:  0000000000000000
00001490:  0000000000000000
00001498:  0000000000000000
000014a0:  0000000000000000
000014a8:  0000000000000000
000014b0:  0000000000000000
000014b8:  0000000000000000
000014c0:  0000000000000000
000014c8:  0000000000000000
000014d0:  0000000000000000
000014d8:  0000000000000000
000014e0:  0000000000000000
000014e8:  0000000000000000
000014f0:  0000000000000000
000014f8:  0000000000000000
00001500:  0000000000000000
00001508:  0000040000000000
00001510:  0000000000000000
00001518:  0000000000000000
00001520:  0000000000000000
00001528:  0000000000000000
00001530:  0000000000000000
00001538:  0000000000000000
00001540:  0000000000000000
00001548:  0000000000000000
00001550:  0000000000000000
00001558:  0000000000000000
00001560:  0000000000000000
00001568:  0000000000000000
00001570:  0000000000000000
00001578:  0000000000000000
00001580:  fffffffff0000000
00001588:  ffffff0000000000
00001590:  0000000000000000
00001598:  0000000000000000
000015a0:  0000000000000000
000015a8:  0000000000000000
000015b0:  0000000000000000
000015b8:  0000000000000000
000015c0:  0000000000000000
000015c8:  0000000000000000
000015d0:  0000000000000000
000015d8:  0000000000000000
000015e0:  0000000000000000
000015e8:  0000000000000000
000015f0:  0000000000000000
000015f8:  0000000000000000
00001600:  00000000000000f0
00001608:  00000000000000f0
00001610:  0000000080000000
00001618:  0000000000000000
00001620:  0000000000000000
00001628:  0000000000000000
00001630:  0000000000000000
00001638:  0000000000000000
00001640:  0000000000000000
00001648:  0000000000000000
00001650:  0000000000000000
00001658:  0000000000000000
00001660:  0000000000000000
00001668:  0000000000000000
00001670:  0000000000000000
00001678:  0000000000000000
00001680:  0000000000000000
00001688:  0000000000000000
00001690:  0000000000000000
00001698:  0000000000000000
000016a0:  0000000000000000
000016a8:  0000000000000000
000016b0:  0000000000000000
000016b8:  0000000000000000
000016c0:  0000000000000000
000016c8:  0000000000000000
000016d0:  0000000000000000
000016d8:  0000000000000000
000016e0:  0000000000000000
000016e8:  0000000000000000
000016f0:  0000000000000000
000016f8:  0000000000000000
00001700:  0000000000000000
00001708:  aaaaaaaafffffffe
00001710:  0000000000000000
00001718:  0000000000000000
00001720:  0000000000000000
00001728:  0000000000000000
00001730:  0000000000000000

MC0 Config DONE

Probing DDR MC1 SLOT: 
Slot 0: s1 = 0x00114008__c3004000

Slot 1: s1 = 0x00000000__00000000

 T5 s1 = 00114008__c3005f20

 t0 = 0x00000000__00000000

Enable register space of MEMORY

init start
908:0007080c00e1e1c1
 begin Reset MC 
init start
908:000e0f1400e1e1c1
 begin Reset MC 
init start
908:0007190c00e1e1c1
 begin Reset MC 
init start
908:0000110500e1e1c1
 begin Reset MC 
init start
908:0005051b00e1e1c1
 begin Reset MC 
init start
908:00200f0200e1e1c1
 begin Reset MC 
init start
908:0016051b00e1e1c1
 begin Reset MC 
init start
908:000c0c0000e1e1c1
 begin Reset MC 
init start
908:0000110500e1e1c1
 begin Reset MC 
init start
908:0013031800e1e1c1
 begin Reset MC 
init start
908:0002140700e1e1c1
 begin Reset MC 
init start
908:0005160a00e1e1c1
 begin Reset MC 
init start
908:0011001600e1e1c1
 begin Reset MC 
init start
908:001d0c1100e1e1c1
 begin Reset MC 
init start
908:0005160a00e1e1c1
 begin Reset MC 
init start
908:0018070c00e1e1c1
 begin Reset MC 
init start
908:0000111600e1e1c1
 begin Reset MC 
init start
908:0007190c00e1e1c1
 begin Reset MC 
init start
908:0007190c00e1e1c1
 begin Reset MC 
init start
908:0002031800e1e1c1
 begin Reset MC 
init start
908:0014031800e1e1c1
 begin Reset MC 
init start
908:000a1b0f00e1e1c1
 begin Reset MC 
init start
908:0000000500e1e1c1
init done
Start Hard Leveling...
Enable register space of MEMORY

start training of tPHY_WR

tPHY_WRLAT training successThe MC param after leveling is:
PHY:
00000000:  0000000000000011
00000008:  0000000000000037
00000010:  0000000000000103
00000018:  0000000000000000
00000020:  0000000000000001
00000028:  0000000000000000
00000030:  0052010100040510
00000038:  0000000000000144
00000040:  000000080000002a
00000048:  02041c3801010100
00000050:  000000080000002a
00000058:  02041c3800000000
00000060:  000000080000002a
00000068:  02041c3800000000
00000070:  000000080000002a
00000078:  03041c3800010100
00000080:  000000080000002a
00000088:  02041c3800000000
00000090:  000000080000002a
00000098:  02041c3800000000
000000a0:  000000080000002a
000000a8:  02041c3800000000
000000b0:  000000080000002a
000000b8:  03041c3800010100
000000c0:  000000080000002a
000000c8:  02041c3800000000
000000d0:  000000080000002a
000000d8:  02041c3800000000
000000e0:  00000001ff001000
000000e8:  00000001ff001000
000000f0:  00000001ff001000
000000f8:  00000001ff001000
00000100:  0000000012002012
00000108:  00000000004c191b
00000110:  8204008800000080
00000118:  0000000000000003
00000120:  0000000101010101
00000128:  0000000000000000
00000130:  0000000000000000
00000138:  0000000000000000
00000140:  0000000000000000
00000148:  0000000000000000
00000150:  0000020000000200
00000158:  0000000000000000
00000160:  0000000000000202
00000168:  0000000000000000
00000170:  0000000000000000
00000178:  0000000000000000
00000180:  0000000024001e24
00000188:  000000000043191b
00000190:  8204008800000080
00000198:  0000000000000003
000001a0:  0000000000000000
000001a8:  0000000000000000
000001b0:  0000000000000000
000001b8:  0000000000000000
000001c0:  0000000000000000
000001c8:  0000000000000000
000001d0:  0000000000000200
000001d8:  0000000000000000
000001e0:  0000000000000200
000001e8:  0000000000000000
000001f0:  0000000000000000
000001f8:  0000000000000000
00000200:  0000000038001e38
00000208:  000000000032191b
00000210:  8204008800000080
00000218:  0000000000000003
00000220:  0000000000000000
00000228:  0000000000000000
00000230:  0000000000000000
00000238:  0000000000000000
00000240:  0000000000000000
00000248:  0000000000000000
00000250:  0000000000000200
00000258:  0000000000000000
00000260:  0000000000000000
00000268:  0000000000000000
00000270:  0000000000000000
00000278:  0000000000000000
00000280:  0000000047002047
00000288:  00000000002f1918
00000290:  8204008800000080
00000298:  0000000000000003
000002a0:  0101010101000001
000002a8:  0000000000000000
000002b0:  0000000000000000
000002b8:  0000000000000000
000002c0:  0000000000000000
000002c8:  0000000000000000
000002d0:  0202020002000402
000002d8:  0000000000000000
000002e0:  0202020202020202
000002e8:  0000000000000000
000002f0:  0000000000000000
000002f8:  0000000000000000
00000300:  0000000071002071
00000308:  00000000002b191b
00000310:  8204008800000080
00000318:  0000000000000003
00000320:  0000000000010100
00000328:  0000000000000000
00000330:  0000000000000000
00000338:  0000000000000000
00000340:  0000000000000000
00000348:  0000000000000000
00000350:  0000000000000000
00000358:  0000000000000000
00000360:  0000000000000000
00000368:  0000000000000000
00000370:  0000000000000000
00000378:  0000000000000000
00000380:  0000000078001e78
00000388:  0000000000381918
00000390:  8204008800000080
00000398:  0000000000000003
000003a0:  0000000000000000
000003a8:  0000000000000000
000003b0:  0000000000000000
000003b8:  0000000000000000
000003c0:  0000000000000000
000003c8:  0000000000000000
000003d0:  0202020002020202
000003d8:  0000000000000000
000003e0:  0202020202020202
000003e8:  0000000000000000
000003f0:  0000000000000000
000003f8:  0000000000000000
00000400:  0000000000002000
00000408:  0000000000451918
00000410:  8204008800000080
00000418:  0000000000150003
00000420:  0000000000000000
00000428:  0000000000000000
00000430:  0000000000000000
00000438:  0000000000000000
00000440:  0000000000000000
00000448:  0000000000000000
00000450:  0200020202020402
00000458:  0000000000000000
00000460:  0202020202020402
00000468:  0000000000000000
00000470:  0000000000000000
00000478:  0000000000000000
00000480:  0000000001002001
00000488:  0000000000571918
00000490:  8204008800000080
00000498:  0000000000150300
000004a0:  0001010101010100
000004a8:  0000000000000000
000004b0:  0000000000000000
000004b8:  0000000000000000
000004c0:  0000000000000000
000004c8:  0000000000000000
000004d0:  0200020002000200
000004d8:  0000000000000000
000004e0:  0202000002000200
000004e8:  0000000000000000
000004f0:  0000000000000000
000004f8:  0000000000000000
00000500:  0000000000002000
00000508:  0000000000001919
00000510:  8204008800000080
00000518:  0000000000000000
00000520:  0000000000000000
00000528:  0000000000000000
00000530:  0000000000000000
00000538:  0000000000000000
00000540:  0000000000000000
00000548:  0000000000000000
00000550:  0000000000000000
00000558:  0000000000000000
00000560:  0000000000000000
00000568:  0000000000000000
00000570:  0000000000000000
00000578:  0000000000000000
00000580:  0000000000000000
00000588:  0000000000000000
00000590:  0000000000000000
00000598:  0000000000000000
000005a0:  0000000000000000
000005a8:  0000000000000000
000005b0:  0000000000000000
000005b8:  0000000000000000
000005c0:  0000000000000000
000005c8:  0000000000000000
000005d0:  0000000000000000
000005d8:  0000000000000000
000005e0:  0000000000000000
000005e8:  0000000000000000
000005f0:  0000000000000000
000005f8:  0000000000000000
00000600:  0000000000000000
00000608:  0000000000000000
00000610:  0000000000000000
00000618:  0000000000000000
00000620:  0000000000000000
00000628:  0000000000000000
00000630:  0000000000000000
00000638:  0000000000000000
00000640:  0000000000000000
00000648:  0000000000000000
00000650:  0000000000000000
00000658:  0000000000000000
00000660:  0000000000000000
00000668:  0000000000000000
00000670:  0000000000000000
00000678:  0000000000000000
00000680:  0000000000000000
00000688:  0000000000000000
00000690:  0000000000000000
00000698:  0000000000000000
000006a0:  0000000000000000
000006a8:  0000000000000000
000006b0:  0000000000000000
000006b8:  0000000000000000
000006c0:  0000000000000000
000006c8:  0000000000000000
000006d0:  0000000000000000
000006d8:  0000000000000000
000006e0:  0000000000000000
000006e8:  0000000000000000
000006f0:  0000000000000000
000006f8:  0000000000000000
00000700:  0000000001300000
00000708:  0000000000000100
00000710:  0000000000000000
00000718:  0000000000000000
00000720:  0000000000000000
00000728:  0000000000000000
00000730:  0000000000000000
00000738:  0000000000000000
00000740:  0000000000000000
00000748:  0000000000000000
00000750:  0000000000000000
00000758:  0000000000000000
00000760:  0000000000000000
00000768:  0000000000000000
00000770:  0000000000000000
00000778:  0000000000000000
00000780:  0000000000000000
00000788:  0000000000000000
00000790:  0000000000000000
00000798:  0000000000000000
000007a0:  0000000000000000
000007a8:  0000000000000000
000007b0:  0000000000000000
000007b8:  0000000000000000
000007c0:  0000000000000000
000007c8:  0000000000000000
000007d0:  0000000000000000
000007d8:  0000000000000000
000007e0:  0000000000000000
000007e8:  0000000000000000
000007f0:  0000000000000000
000007f8:  0000000000000000
00000800:  0506647f0026d2df
00000808:  000201010003ed79
00000810:  0921086109610941
00000818:  08a108410a2109e1
00000820:  0000000000000981
00000828:  0000000000000000
00000830:  000002ed00000b42
00000838:  0000000000000000
00000840:  89bf89bf89bf89bf
00000848:  89bf89bf89bf89bf
00000850:  00000000000089bf
00000858:  0000000000008900
00000860:  0000000000008900
00000868:  0000000000008900
00000870:  0000000000008900
00000878:  0000000000008900
00000880:  0000000000008900
00000888:  0000000000008900
00000890:  0000000000008900
00000898:  0000000000008900
000008a0:  0000000000008900
000008a8:  0000000000008900
000008b0:  0000000000008900
000008b8:  0000000000008900
000008c0:  0000000000008900
000008c8:  0000000000008900
000008d0:  0000000000008900
000008d8:  0000000000008900
000008e0:  0000000000008900
000008e8:  0000000000008900
000008f0:  0000000000008900
000008f8:  0000000000008900
00000900:  0000000000ff0000
00000908:  0000000500e1e1c1

CTRL:
00001000:  000b201801206228
00001008:  000000000000000a
00001010:  0186a00001180186
00001018:  050301200000000f
00001020:  0000000010041405
00001028:  0000000062028004
00001030:  0000000000000000
00001038:  0000000000000000
00001040:  0b0405040000001a
00001048:  00000006100c2214
00001050:  060a020600060405
00001058:  0000000000000000
00001060:  00000409000a120b
00001068:  0000000000000000
00001070:  0000000000000000
00001078:  0000000000000402
00001080:  0000000000000402
00001088:  0000000000000000
00001090:  0000000000000000
00001098:  0000000404000404
000010a0:  0000000000000000
000010a8:  0000000000000000
000010b0:  0000000000000000
000010b8:  0000000000000000
000010c0:  0000000000000000
000010c8:  0000000000000000
000010d0:  0000000000000000
000010d8:  0000000000000000
000010e0:  0000000000000000
000010e8:  0000000000000000
000010f0:  0000000000000000
000010f8:  0000000000000000
00001100:  0000010101010101
00001108:  0000000100000000
00001110:  0000000000000000
00001118:  0000000000000000
00001120:  0100010008000000
00001128:  ff000200030000fe
00001130:  0000000000000000
00001138:  0000000000000000
00001140:  0000001800060d60
00001148:  0000001800040d60
00001150:  0000001800040d60
00001158:  0000001800040d60
00001160:  0000001800040d60
00001168:  0000001800040d60
00001170:  0000001800040d60
00001178:  0000001800040d60
00001180:  0200000005010210
00001188:  0000040004800000
00001190:  0200000005010210
00001198:  0000040004800000
000011a0:  0200000005010210
000011a8:  0000040004800000
000011b0:  0200000005010210
000011b8:  0000040004800000
000011c0:  0200000005010210
000011c8:  0000040004800000
000011d0:  0200000005010210
000011d8:  0000040004800000
000011e0:  0200000005010210
000011e8:  0000040004800000
000011f0:  0200000005010210
000011f8:  0000040004800000
00001200:  0000010003140400
00001208:  0000000000200000
00001210:  0000000000000000
00001218:  0000000000000000
00001220:  0fff00000ff00000
00001228:  0000000000000000
00001230:  0000030300010202
00001238:  0000000f00000000
00001240:  0f28100001010101
00001248:  0000000000ff010f
00001250:  0000000000000080
00001258:  0055004400330022
00001260:  0000000000000000
00001268:  0000000000000000
00001270:  0000000000000000
00001278:  0000000000000000
00001280:  0100000000000000
00001288:  0000000000000000
00001290:  0000000000000000
00001298:  0000000000000000
000012a0:  0000000000000000
000012a8:  0000000000000000
000012b0:  0000000000000000
000012b8:  0000000000000000
000012c0:  0000000000000000
000012c8:  0000000000000000
000012d0:  0000000000000000
000012d8:  0000000000000000
000012e0:  0000000000000000
000012e8:  0000000000000000
000012f0:  0000000000000000
000012f8:  0000000000000000
00001300:  0000000000000700
00001308:  0000000000000000
00001310:  0000000000000000
00001318:  0000000000000000
00001320:  0000000000000000
00001328:  0000000000000000
00001330:  0000000000000000
00001338:  0000000000000000
00001340:  0000000000000000
00001348:  0000000000000000
00001350:  0018001400140010
00001358:  0000000000000008
00001360:  0000000000000000
00001368:  0000000000000000
00001370:  0000000000000000
00001378:  0000000000000000
00001380:  000000000000000f
00001388:  0000000000000001
00001390:  000000000000000a
00001398:  0000000000000000
000013a0:  0000000000000000
000013a8:  0000000000000000
000013b0:  0000000000000000
000013b8:  0000000000000000
000013c0:  0000000000000001
000013c8:  0000000000000600
000013d0:  0000000000000000
000013d8:  0000000000000000
000013e0:  0000000000000000
000013e8:  0000000000000000
000013f0:  0000000000000000
000013f8:  0000000000000000
00001400:  0000000824083010
00001408:  0000000000000000
00001410:  0000000000000000
00001418:  0000000000000000
00001420:  0000000000000000
00001428:  0000000000000000
00001430:  0000000000000000
00001438:  0000000000000000
00001440:  0000000000010307
00001448:  0000000000000000
00001450:  0000000000000000
00001458:  0000000000000000
00001460:  0000000000000000
00001468:  0000000000000000
00001470:  0000000000000000
00001478:  0000000000000000
00001480:  0000000000000000
00001488:  0000000000000000
00001490:  0000000000000000
00001498:  0000000000000000
000014a0:  0000000000000000
000014a8:  0000000000000000
000014b0:  0000000000000000
000014b8:  0000000000000000
000014c0:  0000000000000000
000014c8:  0000000000000000
000014d0:  0000000000000000
000014d8:  0000000000000000
000014e0:  0000000000000000
000014e8:  0000000000000000
000014f0:  0000000000000000
000014f8:  0000000000000000
00001500:  0000000000000000
00001508:  0000050000000000
00001510:  0000000000000000
00001518:  0000000000000000
00001520:  0000000000000000
00001528:  0000000000000000
00001530:  0000000000000000
00001538:  0000000000000000
00001540:  0000000000000000
00001548:  0000000000000000
00001550:  0000000000000000
00001558:  0000000000000000
00001560:  0000000000000000
00001568:  0000000000000000
00001570:  0000000000000000
00001578:  0000000000000000
00001580:  fffffffff0000000
00001588:  ffffff0000000000
00001590:  0000000000000000
00001598:  0000000000000000
000015a0:  0000000000000000
000015a8:  0000000000000000
000015b0:  0000000000000000
000015b8:  0000000000000000
000015c0:  0000000000000000
000015c8:  0000000000000000
000015d0:  0000000000000000
000015d8:  0000000000000000
000015e0:  0000000000000000
000015e8:  0000000000000000
000015f0:  0000000000000000
000015f8:  0000000000000000
00001600:  00000000000000f0
00001608:  00000000000000f0
00001610:  0000000080000000
00001618:  0000000000000000
00001620:  0000000000000000
00001628:  0000000000000000
00001630:  0000000000000000
00001638:  0000000000000000
00001640:  0000000000000000
00001648:  0000000000000000
00001650:  0000000000000000
00001658:  0000000000000000
00001660:  0000000000000000
00001668:  0000000000000000
00001670:  0000000000000000
00001678:  0000000000000000
00001680:  0000000000000000
00001688:  0000000000000000
00001690:  0000000000000000
00001698:  0000000000000000
000016a0:  0000000000000000
000016a8:  0000000000000000
000016b0:  0000000000000000
000016b8:  0000000000000000
000016c0:  0000000000000000
000016c8:  0000000000000000
000016d0:  0000000000000000
000016d8:  0000000000000000
000016e0:  0000000000000000
000016e8:  0000000000000000
000016f0:  0000000000000000
000016f8:  0000000000000000
00001700:  0000000000000000
00001708:  aaaaaaaafffffffe
00001710:  0000000000000000
00001718:  0000000000000000
00001720:  0000000000000000
00001728:  0000000000000000
00001730:  0000000000000000

MC1 Config DONE

s1 = 0x00080080

Enable memory space of MC0/1(interleaved at bit 00000008):
0x00000000_80000000 -- 0x00000004_7fffffff

msize = 0x0000000000000010
Init Memory done.

Unlock Scache Node

bridge CHIP ID: 0x7a800000revision: 0x00000000
Open 3A HT RX space.
Disable 3A HT dw_write.
Set 3A4000 HT int, using 8 bit int.
Set 3A4000 HT EXT int allow, allow kernel to use EXT_IOI.
Open 7A HT RX space.
Disable 7A HT dw_write.
Enable 7A HT configure access.
Node 0 LS3A-7A init done.
Read local memory..
Read node0 7A times: 0x10000 ..
config 7A dma route done.
7A HT Hi clock disabled.
LS7A pll configure done.
LS7A chip init done.
SATA0 enabled
SATA1 enabled
SATA2 enabled
USB0 enabled
USB1 enabled
GMAC0 disabled.
GMAC1 disabled.
LPC enabled
Lemote PCIE PERST_N deasserted.
PCIE F0 enabled
unused PCIE F0 ports clock disabled.
PCIE F1 enabled
unused PCIE F1 ports clock disabled.
PCIE H enabled
Powerdown PCIE H PHY and disable all Ports.
unused PCIE H ports clock disabled.
PCIE G0 enabled
Powerdown PCIE G0 PHY and disable all Ports.
unused PCIE G0 ports clock disabled.
PCIE G1 enabled
Powerdown PCIE G1 PHY and disable all Ports.
unused PCIE G1 ports clock disabled.
Gmem config begin
Enable gmem config space

write leveling begin

all dll_wrdqs set 0

set leveling mode to be WRITE LEVELING

write leveling ready

write leveling finish and gate leveling begin

PREAMBLE CHECK!!

The preamble check success

PREAMBLE CHECK!!

The preamble check success
Disable gmem config space
The gmem data is:
00000000:  5555555555555555
00000008:  aaaaaaaaaaaaaaaa
00000010:  3333333333333333
00000018:  cccccccccccccccc
00000020:  7777777777777777
00000028:  8888888888888888
00000030:  1111111111111111
00000038:  eeeeeeeeeeeeeeee
LS7A uncache accellerator enabled

LS7A init done.
Copy PMON to execute location...
  start = 0x8f900000
  s0 = 0x30300000
  _edata = 0x8f9c0010
  _end = 0x8f9c1028copy text section done.
Copy PMON to execute location done.
Wake up other cores
sp=8f8fc000
Uncompressing Bios..................................................................................OK,Booting Bios
memorysize_high: 0x3f0000000
FREQ
FREI
cpu freq 1800020000, cnt 90000863
DONE
DEVI
ENVI
MAPV
in envinit
nvram=bfc00000
NVRAM@bfcff000
STDV
80100000:  memory between 8f7ff000-8f800000  is already been allocated,heap is already above this point
SBDD
P12PCIH
PCIH
PCID
setting up 1 bus
PCI bus 0 slot 1: probe...completed
PCI bus 0 slot 2: probe...completed
PCI bus 0 slot 3: probe...completed
PCI bus 0 slot 4: probe...completed
PCI bus 0 slot 4/0: vendor/product: 0x0014/0x7a24 (serialbus, USB, interface: 0x10, revision: 0x00)
PCI bus 0 slot 4/0: reg 0x10 = 0xffff8004
PCI bus 0 slot 4/1: vendor/product: 0x0014/0x7a14 (serialbus, USB, interface: 0x20, revision: 0x00)
PCI bus 0 slot 4/1: reg 0x10 = 0xffff8004
PCI bus 0 slot 5: probe...completed
PCI bus 0 slot 5/0: vendor/product: 0x0014/0x7a24 (serialbus, USB, interface: 0x10, revision: 0x00)
PCI bus 0 slot 5/0: reg 0x10 = 0xffff8004
PCI bus 0 slot 5/1: vendor/product: 0x0014/0x7a14 (serialbus, USB, interface: 0x20, revision: 0x00)
PCI bus 0 slot 5/1: reg 0x10 = 0xffff8004
PCI bus 0 slot 6: probe...completed
PCI bus 0 slot 6/0: vendor/product: 0x0014/0x7a15 (multimedia, video, interface: 0x00, revision: 0x00)
PCI bus 0 slot 6/0: reg 0x10 = 0xfffc0004
PCI bus 0 slot 6/0: reg 0x18 = 0xf8000004
PCI bus 0 slot 6/0: reg 0x20 = 0xffff0004
PCI bus 0 slot 6/1: vendor/product: 0x0014/0x7a06 (display, miscellaneous, interface: 0x00, revision: 0x00)
PCI bus 0 slot 6/1: reg 0x10 = 0xffff0004
PCI bus 0 slot 7: probe...completed
PCI bus 0 slot 7/0: vendor/product: 0x0014/0x7a07 (multimedia, subclass: 0x03, interface: 0x00, revision: 0x00)
PCI bus 0 slot 7/0: reg 0x10 = 0xffff0004
PCI bus 0 slot 8: probe...completed
PCI bus 0 slot 8/0: vendor/product: 0x0014/0x7a08 (mass storage, subclass: 0x06, interface: 0x01, revision: 0x00)
PCI bus 0 slot 8/0: reg 0x10 = 0xffffe004
PCI bus 0 slot 8/1: vendor/product: 0x0014/0x7a08 (mass storage, subclass: 0x06, interface: 0x01, revision: 0x00)
PCI bus 0 slot 8/1: reg 0x10 = 0xffffe004
PCI bus 0 slot 8/2: vendor/product: 0x0014/0x7a08 (mass storage, subclass: 0x06, interface: 0x01, revision: 0x00)
PCI bus 0 slot 8/2: reg 0x10 = 0xffffe004
PCI bus 0 slot 9: probe...completed
PCI bus 0 slot 9/0: vendor/product: 0x0014/0x7a19 (bridge, PCI, interface: 0x00, revision: 0x01)
PCI bus 1 slot 0: probe...completed
PCI bus 1 slot 0/0: vendor/product: 0x1b21/0x0612 (mass storage, subclass: 0x06, interface: 0x01, revision: 0x02)
PCI bus 1 slot 0/0: reg 0x10 = 0xfffffff9
PCI bus 1 slot 0/0: reg 0x14 = 0xfffffffd
PCI bus 1 slot 0/0: reg 0x18 = 0xfffffff9
PCI bus 1 slot 0/0: reg 0x1c = 0xfffffffd
PCI bus 1 slot 0/0: reg 0x20 = 0xffffffe1
PCI bus 1 slot 0/0: reg 0x24 = 0xfffffe00
PCI bus 1 slot 0/0: reg 0x30 = 0xffff0000
PCI bus 1 slot 1: probe...completed
PCI bus 1 slot 2: probe...completed
PCI bus 1 slot 3: probe...completed
PCI bus 1 slot 4: probe...completed
PCI bus 1 slot 5: probe...completed
PCI bus 1 slot 6: probe...completed
PCI bus 1 slot 7: probe...completed
PCI bus 1 slot 8: probe...completed
PCI bus 1 slot 9: probe...completed
PCI bus 1 slot 10: probe...completed
PCI bus 1 slot 11: probe...completed
PCI bus 1 slot 12: probe...completed
PCI bus 1 slot 13: probe...completed
PCI bus 1 slot 14: probe...completed
PCI bus 1 slot 15: probe...completed
PCI bus 1 slot 16: probe...completed
PCI bus 1 slot 17: probe...completed
PCI bus 1 slot 18: probe...completed
PCI bus 1 slot 19: probe...completed
PCI bus 1 slot 20: probe...completed
PCI bus 1 slot 21: probe...completed
PCI bus 1 slot 22: probe...completed
PCI bus 1 slot 23: probe...completed
PCI bus 1 slot 24: probe...completed
PCI bus 1 slot 25: probe...completed
PCI bus 1 slot 26: probe...completed
PCI bus 1 slot 27: probe...completed
PCI bus 1 slot 28: probe...completed
PCI bus 1 slot 29: probe...completed
PCI bus 1 slot 30: probe...completed
PCI bus 1 slot 31: probe...completed
PCI bus 0 slot 9/0: reg 0x10 = 0xfffff004
PCI bus 0 slot 10: probe...completed
PCI bus 0 slot 11: probe...completed
PCI bus 0 slot 11/0: vendor/product: 0x0014/0x7a09 (bridge, PCI, interface: 0x00, revision: 0x01)
PCI bus 2 slot 0: probe...completed
pcie-slot device: vendor:10ec product:8168
PCI bus 2 slot 0/0: vendor/product: 0x10ec/0x8168 (network, ethernet, interface: 0x00, revision: 0x0c)
PCI bus 2 slot 0/0: reg 0x10 = 0xffffff01
PCI bus 2 slot 0/0: reg 0x18 = 0xfffff004
PCI bus 2 slot 0/0: reg 0x20 = 0xffffc00c
PCI bus 2 slot 1: probe...completed
PCI bus 2 slot 2: probe...completed
PCI bus 2 slot 3: probe...completed
PCI bus 2 slot 4: probe...completed
PCI bus 2 slot 5: probe...completed
PCI bus 2 slot 6: probe...completed
PCI bus 2 slot 7: probe...completed
PCI bus 2 slot 8: probe...completed
PCI bus 2 slot 9: probe...completed
PCI bus 2 slot 10: probe...completed
PCI bus 2 slot 11: probe...completed
PCI bus 2 slot 12: probe...completed
PCI bus 2 slot 13: probe...completed
PCI bus 2 slot 14: probe...completed
PCI bus 2 slot 15: probe...completed
PCI bus 2 slot 16: probe...completed
PCI bus 2 slot 17: probe...completed
PCI bus 2 slot 18: probe...completed
PCI bus 2 slot 19: probe...completed
PCI bus 2 slot 20: probe...completed
PCI bus 2 slot 21: probe...completed
PCI bus 2 slot 22: probe...completed
PCI bus 2 slot 23: probe...completed
PCI bus 2 slot 24: probe...completed
PCI bus 2 slot 25: probe...completed
PCI bus 2 slot 26: probe...completed
PCI bus 2 slot 27: probe...completed
PCI bus 2 slot 28: probe...completed
PCI bus 2 slot 29: probe...completed
PCI bus 2 slot 30: probe...completed
PCI bus 2 slot 31: probe...completed
PCI bus 0 slot 11/0: reg 0x10 = 0xfffff004
PCI bus 0 slot 12: probe...completed
PCI bus 0 slot 13: probe...completed
PCI bus 0 slot 13/0: vendor/product: 0x0014/0x7a19 (bridge, PCI, interface: 0x00, revision: 0x01)
PCI bus 3 slot 0: probe...completed
PCI bus 3 slot 0/0: vendor/product: 0x1912/0x0014 (serialbus, USB, interface: 0x30, revision: 0x03)
PCI bus 3 slot 0/0: reg 0x10 = 0xffffe004
PCI bus 3 slot 1: probe...completed
PCI bus 3 slot 2: probe...completed
PCI bus 3 slot 3: probe...completed
PCI bus 3 slot 4: probe...completed
PCI bus 3 slot 5: probe...completed
PCI bus 3 slot 6: probe...completed
PCI bus 3 slot 7: probe...completed
PCI bus 3 slot 8: probe...completed
PCI bus 3 slot 9: probe...completed
PCI bus 3 slot 10: probe...completed
PCI bus 3 slot 11: probe...completed
PCI bus 3 slot 12: probe...completed
PCI bus 3 slot 13: probe...completed
PCI bus 3 slot 14: probe...completed
PCI bus 3 slot 15: probe...completed
PCI bus 3 slot 16: probe...completed
PCI bus 3 slot 17: probe...completed
PCI bus 3 slot 18: probe...completed
PCI bus 3 slot 19: probe...completed
PCI bus 3 slot 20: probe...completed
PCI bus 3 slot 21: probe...completed
PCI bus 3 slot 22: probe...completed
PCI bus 3 slot 23: probe...completed
PCI bus 3 slot 24: probe...completed
PCI bus 3 slot 25: probe...completed
PCI bus 3 slot 26: probe...completed
PCI bus 3 slot 27: probe...completed
PCI bus 3 slot 28: probe...completed
PCI bus 3 slot 29: probe...completed
PCI bus 3 slot 30: probe...completed
PCI bus 3 slot 31: probe...completed
PCI bus 0 slot 13/0: reg 0x10 = 0xfffff004
PCI bus 0 slot 14: probe...completed
PCI bus 0 slot 14/0: vendor/product: 0x0014/0x7a09 (bridge, PCI, interface: 0x00, revision: 0x01)
PCI bus 4 slot 0: probe...completed
PCI bus 4 slot 0/0: vendor/product: 0x1b21/0x1142 (serialbus, USB, interface: 0x30, revision: 0x00)
PCI bus 4 slot 0/0: reg 0x10 = 0xffff8004
PCI bus 4 slot 1: probe...completed
PCI bus 4 slot 2: probe...completed
PCI bus 4 slot 3: probe...completed
PCI bus 4 slot 4: probe...completed
PCI bus 4 slot 5: probe...completed
PCI bus 4 slot 6: probe...completed
PCI bus 4 slot 7: probe...completed
PCI bus 4 slot 8: probe...completed
PCI bus 4 slot 9: probe...completed
PCI bus 4 slot 10: probe...completed
PCI bus 4 slot 11: probe...completed
PCI bus 4 slot 12: probe...completed
PCI bus 4 slot 13: probe...completed
PCI bus 4 slot 14: probe...completed
PCI bus 4 slot 15: probe...completed
PCI bus 4 slot 16: probe...completed
PCI bus 4 slot 17: probe...completed
PCI bus 4 slot 18: probe...completed
PCI bus 4 slot 19: probe...completed
PCI bus 4 slot 20: probe...completed
PCI bus 4 slot 21: probe...completed
PCI bus 4 slot 22: probe...completed
PCI bus 4 slot 23: probe...completed
PCI bus 4 slot 24: probe...completed
PCI bus 4 slot 25: probe...completed
PCI bus 4 slot 26: probe...completed
PCI bus 4 slot 27: probe...completed
PCI bus 4 slot 28: probe...completed
PCI bus 4 slot 29: probe...completed
PCI bus 4 slot 30: probe...completed
PCI bus 4 slot 31: probe...completed
PCI bus 0 slot 14/0: reg 0x10 = 0xfffff004
PCI bus 0 slot 15: probe...completed
PCI bus 0 slot 16: probe...completed
PCI bus 0 slot 17: probe...completed
PCI bus 0 slot 18: probe...completed
PCI bus 0 slot 19: probe...completed
PCI bus 0 slot 20: probe...completed
PCI bus 0 slot 21: probe...completed
PCI bus 0 slot 22: probe...completed
PCI bus 0 slot 22/0: vendor/product: 0x0014/0x7a0b (system, miscellaneous, interface: 0x00, revision: 0x00)
PCI bus 0 slot 22/0: reg 0x10 = 0xfffff004
PCI bus 0 slot 22/0: reg 0x18 = 0xff000004
PCI bus 0 slot 23: probe...completed
PCI bus 0 slot 23/0: vendor/product: 0x0014/0x7a0c (bridge, ISA, interface: 0x00, revision: 0x00)
PCI bus 0 slot 24: probe...completed
PCI bus 0 slot 25: probe...completed
PCI bus 0 slot 26: probe...completed
PCI bus 0 slot 27: probe...completed
PCI bus 0 slot 28: probe...completed
PCI bus 0 slot 29: probe...completed
PCI bus 0 slot 30: probe...completed
PCI bus 0 slot 31: probe...completed
PCIS
PCIR
PCIW
PCI bus 0 slot 6/0: mem @0x40000000, reg 0x18 134217728 bytes
PCI bus 0 slot 22/0: mem @0x48000000, reg 0x18 16777216 bytes
PCI bus 0 slot 14/0: mem @0x49000000, reg 0x20 1048576 bytes
PCI bus 0 slot 13/0: mem @0x49100000, reg 0x20 1048576 bytes
PCI bus 0 slot 11/0: mem @0x49200000, reg 0x20 1048576 bytes
PCI bus 0 slot 9/0: mem @0x49300000, reg 0x20 1048576 bytes
PCI bus 0 slot 6/0: mem @0x49400000, reg 0x10 262144 bytes
PCI bus 0 slot 7/0: mem @0x49440000, reg 0x10 65536 bytes
PCI bus 0 slot 6/1: mem @0x49450000, reg 0x10 65536 bytes
PCI bus 0 slot 6/0: mem @0x49460000, reg 0x20 65536 bytes
PCI bus 0 slot 5/1: mem @0x49470000, reg 0x10 32768 bytes
PCI bus 0 slot 5/0: mem @0x49478000, reg 0x10 32768 bytes
PCI bus 0 slot 4/1: mem @0x49480000, reg 0x10 32768 bytes
PCI bus 0 slot 4/0: mem @0x49488000, reg 0x10 32768 bytes
PCI bus 0 slot 8/2: mem @0x49490000, reg 0x10 8192 bytes
PCI bus 0 slot 8/1: mem @0x49492000, reg 0x10 8192 bytes
PCI bus 0 slot 8/0: mem @0x49494000, reg 0x10 8192 bytes
PCI bus 0 slot 22/0: mem @0x49496000, reg 0x10 4096 bytes
PCI bus 0 slot 14/0: mem @0x49497000, reg 0x10 4096 bytes
PCI bus 0 slot 13/0: mem @0x49498000, reg 0x10 4096 bytes
PCI bus 0 slot 11/0: mem @0x49499000, reg 0x10 4096 bytes
PCI bus 0 slot 9/0: mem @0x4949a000, reg 0x10 4096 bytes
PCI bus 0 slot 14/0: i/o @0x00020000, reg 0x1c 4096 bytes
PCI bus 0 slot 13/0: i/o @0x00021000, reg 0x1c 4096 bytes
PCI bus 0 slot 11/0: i/o @0x00022000, reg 0x1c 4096 bytes
PCI bus 0 slot 9/0: i/o @0x00023000, reg 0x1c 4096 bytes
PCI bus 1 slot 0/0: mem @0x49300000, reg 0x30 65536 bytes
PCI bus 1 slot 0/0: mem @0x49310000, reg 0x24 512 bytes
PCI bus 1 slot 0/0: exp @0x49300000, 65536 bytes
PCI bus 1 slot 0/0: i/o @0x00023000, reg 0x20 32 bytes
PCI bus 1 slot 0/0: i/o @0x00023020, reg 0x1c 8 bytes
PCI bus 1 slot 0/0: i/o @0x00023028, reg 0x18 8 bytes
PCI bus 1 slot 0/0: i/o @0x00023030, reg 0x14 8 bytes
PCI bus 1 slot 0/0: i/o @0x00023038, reg 0x10 8 bytes
PCI bus 2 slot 0/0: mem @0x49200000, reg 0x20 16384 bytes
PCI bus 2 slot 0/0: mem @0x49204000, reg 0x18 4096 bytes
PCI bus 2 slot 0/0: i/o @0x00022000, reg 0x10 256 bytes
PCI bus 3 slot 0/0: mem @0x49100000, reg 0x10 8192 bytes
PCI bus 4 slot 0/0: mem @0x49000000, reg 0x10 32768 bytes
SP=ffffffffffffffff, RA=ffffffffffffffff
str_flag=0
not s3 exit 0
NETI
RTCL
PCID
begin dc_init
enter dc_init...
frame buffer addr: 7000000 
for pixclock = 38220 khz, found: pstdiv = 45, loopc = 86, refc = 5, precision = 1 / 10000.
for pixclock = 38220 khz, found: pstdiv = 45, loopc = 86, refc = 5, precision = 1 / 10000.
display controller reg config complete!
fbaddress = 87000000
cfb_console init,fb=87000000
CONSOLE_SIZE 960000
fb_init done
vga available : 1
in configure
mainbus0 (root)
localbus0 at mainbus0
pcibr0 at mainbus0
pci0 at pcibr0 bus 0
ohci0 at pci0 dev 4 function 0 vendor/product: 0x0014/0x7a24 (serialbus, USB, interface: 0x10, revision: 0x00)usb base addr : 0xc9488000, bus_base is : 0xc0000000
OHCI revision: 0x00000110
  RH: a: 0x02000903 b: 0x00000000
early period(0x0)
OHCI 8b01ec00 initialized ok
New Device 0
usb_get_descriptor 
 bLength = 12
 bDescriptorType =1
 bcdUSB =  110
 bDeviceClass =9
 bDeviceSubClass =0
 bDeviceProtocol =0
 bMaxPacketSize0 =8
set address 1
usb_get_descriptor 
 bLength = 12
 bDescriptorType =1
 bcdUSB =  110
 bDeviceClass =9
 bDeviceSubClass =0
 bDeviceProtocol =0
 bMaxPacketSize0 =8
 idVendor =0
 idProduct =0
 bcdDevice =0
 iManufacturer=0
 iProduct =1
 iSerialNumber=0
 bNumConfigurations=1
usb_get_descriptor 
usb_get_descriptor 
get_conf_no 0 Result 25, wLength 25
if 0, ep 0
bLength=9
bDescriptorType=2
wTotalLength=19
bNumInterfaces=1
bConfigurationValue=1
iConfiguration=0
bmAttributes=40
MaxPower=0
09 04 00 00 01 09 00 00 00 07 05 81 03 02 00 ff 
##EP epmaxpacketin[1] = 2
set configuration 1
new device strings: Mfr=0, Product=1, SerialNumber=0
USB device number 1 default language ID 0x409
Manufacturer 
Product      OHCI Root Hub
SerialNumber 
New Device 1
usb_get_descriptor 
 bLength = 12
 bDescriptorType =1
 bcdUSB =  200
 bDeviceClass =ff
 bDeviceSubClass =ff
 bDeviceProtocol =0
 bMaxPacketSize0 =8
set address 2
usb_get_descriptor 
 bLength = 12
 bDescriptorType =1
 bcdUSB =  200
 bDeviceClass =ff
 bDeviceSubClass =ff
 bDeviceProtocol =0
 bMaxPacketSize0 =8
 idVendor =b95
 idProduct =772b
 bcdDevice =1
 iManufacturer=1
 iProduct =2
 iSerialNumber=3
 bNumConfigurations=1
usb_get_descriptor 
usb_get_descriptor 
get_conf_no 0 Result 39, wLength 39
if 0, ep 0
if 0, ep 1
if 0, ep 2
bLength=9
bDescriptorType=2
wTotalLength=27
bNumInterfaces=1
bConfigurationValue=1
iConfiguration=4
bmAttributes=a0
MaxPower=64
09 04 00 00 03 ff ff 00 07 07 05 81 03 08 00 a0 07 05 82 02 40 00 00 07 05 03 02 40 00 00 
##EP epmaxpacketin[1] = 8
##EP epmaxpacketin[2] = 64
##EP epmaxpacketout[3] = 64
set configuration 1
new device strings: Mfr=1, Product=2, SerialNumber=3
USB device number 2 default language ID 0x409
Manufacturer ASIX Elec. Corp.
Product      AX88772B
SerialNumber 000006
drive at ohci0 devnum 2, Product AX88772B
 not configured
drive at ohci0 devnum 1, Product OHCI Root Hub
 not configured
vendor/product: 0x0014/0x7a14 (serialbus, USB, interface: 0x20, revision: 0x00) at pci0 dev 4 function 1 not configured
ohci1 at pci0 dev 5 function 0 vendor/product: 0x0014/0x7a24 (serialbus, USB, interface: 0x10, revision: 0x00)usb base addr : 0xc9478000, bus_base is : 0xc0000000
OHCI revision: 0x00000110
  RH: a: 0x02000903 b: 0x00000000
early period(0x0)
OHCI 8b01e800 initialized ok
New Device 2
usb_get_descriptor 
 bLength = 12
 bDescriptorType =1
 bcdUSB =  110
 bDeviceClass =9
 bDeviceSubClass =0
 bDeviceProtocol =0
 bMaxPacketSize0 =8
set address 3
usb_get_descriptor 
 bLength = 12
 bDescriptorType =1
 bcdUSB =  110
 bDeviceClass =9
 bDeviceSubClass =0
 bDeviceProtocol =0
 bMaxPacketSize0 =8
 idVendor =0
 idProduct =0
 bcdDevice =0
 iManufacturer=0
 iProduct =1
 iSerialNumber=0
 bNumConfigurations=1
usb_get_descriptor 
usb_get_descriptor 
get_conf_no 0 Result 25, wLength 25
if 0, ep 0
bLength=9
bDescriptorType=2
wTotalLength=19
bNumInterfaces=1
bConfigurationValue=1
iConfiguration=0
bmAttributes=40
MaxPower=0
09 04 00 00 01 09 00 00 00 07 05 81 03 02 00 ff 
##EP epmaxpacketin[1] = 2
set configuration 1
new device strings: Mfr=0, Product=1, SerialNumber=0
USB device number 3 default language ID 0x409
Manufacturer 
Product      OHCI Root Hub
SerialNumber 
drive at ohci1 devnum 3, Product OHCI Root Hub
 not configured
vendor/product: 0x0014/0x7a14 (serialbus, USB, interface: 0x20, revision: 0x00) at pci0 dev 5 function 1 not configured
vendor/product: 0x0014/0x7a15 (multimedia, video, interface: 0x00, revision: 0x00) at pci0 dev 6 function 0 not configured
vendor/product: 0x0014/0x7a06 (display, miscellaneous, interface: 0x00, revision: 0x00) at pci0 dev 6 function 1 not configured
vendor/product: 0x0014/0x7a07 (multimedia, subclass: 0x03, interface: 0x00, revision: 0x00) at pci0 dev 7 function 0 not configured
ahci0 at pci0 dev 8 function 0 vendor/product: 0x0014/0x7a08 (mass storage, subclass: 0x06, interface: 0x01, revision: 0x00)Found memory space: memt->bus_base=0xc0000000, baseaddr=0x49494000size=0x2000
ahci_init_one:498: regbase = c9494000
ahci_host_init: start
cap 0xef26ff80  port_map 0x1  n_ports 1
SATA link 0 timeout.
HOST_CTL 0x80000000
HOST_CTL 0x80000002
AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
flags: 64bit ncq stag pm led clo only pmp pio slum part 
ahci: linkmap=0
ahci1 at pci0 dev 8 function 1 vendor/product: 0x0014/0x7a08 (mass storage, subclass: 0x06, interface: 0x01, revision: 0x00)Found memory space: memt->bus_base=0xc0000000, baseaddr=0x49492000size=0x2000
ahci_init_one:498: regbase = c9492000
ahci_host_init: start
cap 0xef26ff80  port_map 0x1  n_ports 1
SATA link 0 timeout.
HOST_CTL 0x80000000
HOST_CTL 0x80000002
AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
flags: 64bit ncq stag pm led clo only pmp pio slum part 
ahci: linkmap=0
ahci2 at pci0 dev 8 function 2 vendor/product: 0x0014/0x7a08 (mass storage, subclass: 0x06, interface: 0x01, revision: 0x00)Found memory space: memt->bus_base=0xc0000000, baseaddr=0x49490000size=0x2000
ahci_init_one:498: regbase = c9490000
ahci_host_init: start
cap 0xef26ff80  port_map 0x1  n_ports 1
SATA link 0 timeout.
HOST_CTL 0x80000000
HOST_CTL 0x80000002
AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
flags: 64bit ncq stag pm led clo only pmp pio slum part 
ahci: linkmap=0
ppb0 at pci0 dev 9 function 0 vendor/product: 0x0014/0x7a19 (bridge, PCI, interface: 0x00, revision: 0x01)
pci1 at ppb0 bus 1
ahci3 at pci1 dev 0 function 0 vendor/product: 0x1b21/0x0612 (mass storage, subclass: 0x06, interface: 0x01, revision: 0x02)Found memory space: memt->bus_base=0xc0000000, baseaddr=0x49310000size=0x200
ahci_init_one:498: regbase = c9310000
ahci_host_init: start
cap 0xeb32ffa1  port_map 0x3  n_ports 2
SATA link ok.
Spinning up device on SATA port 0... Target spinup took 0 ms.
ok.
PORT_SCR_ERR 0x0
PORT_IRQ_STAT 0x0
SATA port 0 status: 0x133
SATA link 1 timeout.
HOST_CTL 0x80000000
HOST_CTL 0x80000002
AHCI 0001.0200 32 slots 2 ports ? Gbps 0x3 impl SATA mode
flags: 64bit ncq stag led clo pmp pio slum part 
ahci: linkmap=1
wd0 at ahci3Port 0, mmio:0xc9310100 status: 133
cmd_slot = 0x8b027800
cmd_tbl_dma = 0x8b027a00
cxk debug
Exit start port 0
tmpid: 8b028e00

000: 0040 3fff c837 0010 0000 0000 003f 0000
008: 0000 0000 5048 5947 3132 3532 3031 5357
016: 3438 3042 474e 2020 0000 0000 0000 5843
024: 5631 3031 3332 494e 5445 4c20 5353 4453
032: 4332 4b47 3438 3047 3820 2020 2020 2020
040: 2020 2020 2020 2020 2020 2020 2020 8001
048: 4000 2f00 4000 0000 0000 0006 3fff 0010
056: 003f fc10 00fb fd01 ffff 0fff 0000 0007
064: 0003 0078 0078 0078 0078 403c 0000 0000
072: 0000 0000 0000 001f 850e 0006 0040 0040
080: 07fc 006d 706b 7401 6163 7069 b401 6163
088: 407f 0002 0002 0000 fffe 0000 0000 0000
096: 0000 0000 0000 0000 36b0 37e4 0000 0000
104: 0000 0004 6003 0000 55cd 2e41 5361 d8cb
112: 0000 0000 0000 0000 0000 0000 0000 415c
120: 415c 0000 0000 0000 0000 0000 0000 0000
(00)ataid->config = 0x40
(01)ataid->cyls = 0x3fff
(02)ataid->reserved2 = 0xc837
(49)ataid->capability = 0x2f
(53)ataid->field_valid =0x6
(63)ataid->dma_mword = 0x7
(64)ataid->eide_pio_modes = 0x3
(75)ataid->queue_depth = 0x1f
(80)ataid->major_rev_num = 0x7fc
(81)ataid->minor_rev_num = 0x6d
(82)ataid->command_set_1 = 0x706b
(83)ataid->command_set_2 = 0x7401
(84)ataid->cfsse = 0x6163
(85)ataid->cfs_enable_1 = 0x7069
(86)ataid->cfs_enable_2 = 0xb401
(87)ataid->csf_default = 0x6163
(88)ataid->dma_ultra = 0x407f
(93)ataid->hw_config = 0x0
ppb1 at pci0 dev 11 function 0 vendor/product: 0x0014/0x7a09 (bridge, PCI, interface: 0x00, revision: 0x01)
pci2 at ppb1 bus 2
vendor/product: 0x10ec/0x8168 (network, ethernet, interface: 0x00, revision: 0x0c) at pci2 dev 0 function 0 not configured
ppb2 at pci0 dev 13 function 0 vendor/product: 0x0014/0x7a19 (bridge, PCI, interface: 0x00, revision: 0x01)
pci3 at ppb2 bus 3
vendor/product: 0x1912/0x0014 (serialbus, USB, interface: 0x30, revision: 0x03) at pci3 dev 0 function 0 not configured
ppb3 at pci0 dev 14 function 0 vendor/product: 0x0014/0x7a09 (bridge, PCI, interface: 0x00, revision: 0x01)
pci4 at ppb3 bus 4
vendor/product: 0x1b21/0x1142 (serialbus, USB, interface: 0x30, revision: 0x00) at pci4 dev 0 function 0 not configured
vendor/product: 0x0014/0x7a0b (system, miscellaneous, interface: 0x00, revision: 0x00) at pci0 dev 22 function 0 not configured
vendor/product: 0x0014/0x7a0c (bridge, ISA, interface: 0x00, revision: 0x00) at pci0 dev 23 function 0 not configured
out configure
Keyboard succesfully initialized.
Press <Del> to set BIOS,waiting for 3 seconds here..... 
devconfig done.
ifinit done.
domaininit done.
init_proc....
HSTI
SYMI
SBDE

[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[
[[  [[[[[[[[[       [[[[[       [[[[   [[[[[  [[[[[      [[[[[       [[[[[       [[[[   [[[[[  [[
[[  [[[[[[[[   [[[[  [[[   [[[[  [[[    [[[[  [[[[  [[[[  [[[   [[[[  [[[   [[[[  [[[    [[[[  [[
[[  [[[[[[[[  [[[[[[ [[[  [[[[[[ [[[  [  [[[  [[[  [[[[[[[[[[[[   [[[[[[[  [[[[[[ [[[  [  [[[  [[
[[  [[[[[[[[  [[[[[[ [[[  [[[[[[ [[[  [[  [[  [[[  [[[    [[[[[[[    [[[[  [[[[[[ [[[  [[  [[  [[
[[  [[[[[[[[  [[[[[[ [[[  [[[[[[ [[[  [[[  [  [[[  [[[[[  [[[[[[[[[[  [[[  [[[[[[ [[[  [[[  [  [[
[[  [[[[[[[[   [[[[  [[[   [[[[  [[[  [[[[    [[[   [[[[  [[[   [[[  [[[[   [[[[  [[[  [[[[    [[
[[       [[[[       [[[[[       [[[[  [[[[[   [[[[       [[[[[      [[[[[[       [[[[  [[[[[   [[
[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[2011 Loongson][[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[

Configuration [Bonito,EL,NET,SCSI,IDE]
Version: PMON2000 3.3 (lm-a1901) #0: Tue Dec 22 01:58:47 UTC 2020 commit b3ece66234adbf7d4e453f0ba4f326c099ac2a76 Author: Jiaxun Yang <jiaxun.yang@flygoat.com> Date:   Tue Dec 22 09:51:10 2020 +0800 .
Supported loaders [txt, srec, elf, bin]
Supported filesystems [net, fat, fs, disk, iso9660, socket, tty, ram]
This software may be redistributed under the BSD copyright.
Copyright 2000-2002, Opsycon AB, Sweden.
Copyright 2005, ICT CAS.
Copyright 2005-2019, Loongson Technology.
CPU 3A4000 @ 1800.02 MHz, BogoMIPS: 3544
sw configured mem @ 400MHz, DDR-1600
Memory size 16384 MB .
Primary Instruction cache size 64KB (64 line, 4 way)
Primary Data cache size 64KB (64 line, 4 way)
Secondary cache size 8192KB

|block size: 1M
Name        Start       Size        End         File Sytem  System      
------------------------------------------------------------------------
(wd0,0)     1           953         954         ext2        linux       
(wd0,1)     954         14305       15259       ext2        linux       
(wd0,2)     15259       442603      457862      unknown     unknown     
BEV1
BEV0
BEV in SR set to zero.
working_fdt=0xbfcfb004
dtb chsum err! you should load_dtb before boot kernel!!!
Miku MAGIC : ffffffff
Miku Magic Mismatch, Miku down
/Not find the file or directory!
we can't locate root directory in super block!
-Only one boot device: (wd0,0)/boot.cf|Now booting the Debian GNU/Linux kernel 5.10.0-22-loongson-3
/Loading file: (wd0,0)/vmlinuz-5.10.0-22-loongson-3 (elf)
(elf)
0x81110000/4360224 + 0x81538820/5252128(z) + 
Entry address is 81110000
Loading initrd image (wd0,0)/initrd.img-5.10.0-22-loongson-\(bin)
-
Loaded 27521633 bytes
Boot with parameters: root=UUID=676d3782-f0ba-4864-b75e-a1dd6f4d48b8 ro console=ttyS0,115200
/home/runner/work/pmon/pmon/Targets/Bonito3a4000_7a/compile/lm-a1901/../../../../pmon/common/env.c:length of boot_param is 00000098
ac = 00000007, nsp @ 8f00fe78, env @ ffffffff, en @ 8f00ff28
vsp = 08xffffffff8f00fe98, ssp @ 08xffffffff8f00ff28
wait status register busy bit time out!
VBIOS crc check is wrong,use default setting!
memory_offset = 0x290df8;cpu_offset = 0x291a04; system_offset = 0x291a60; irq_offset = 0x293dd4; interface_offset = 0x293e28;
board_name:Loongson-3A4000-7A-Dev-1way-ATX_EVB ---0x8f2a3dc0 10
Shutdown:0x20006963 reset:0x8f07e040
dtb chsum err!!!
set coherent
[    0.000000] Linux version 5.10.0-22-loongson-3 (debian-kernel@lists.debian.org) (gcc-10 (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP PREEMPT Debian 5.10.178-3 (2023-04-22)
[    0.000000] CpuClock = 1800020000
[    0.000000] The bridge chip is LS7A
[    0.000000] CP0_Config3: CP0 16.3 (0xdc8030a0)
[    0.000000] CP0_PageGrain: CP0 5.1 (0x68000000)
[    0.000000] NUMA: Discovered 4 cpus on 1 nodes
[    0.000000] Node0: mem_type:1, mem_start:0x200000, mem_size:0xee MB
[    0.000000]        start_pfn:0x80, end_pfn:0x3c00, num_physpages:0x3b80
[    0.000000] Node0: mem_type:2, mem_start:0x90000000, mem_size:0x3d00 MB
[    0.000000]        start_pfn:0x24000, end_pfn:0x118000, num_physpages:0xf7b80
[    0.000000] Node0's addrspace_offset is 0x0
[    0.000000] Node0: start_pfn=0x80, end_pfn=0x118000
[    0.000000] NUMA: set cpumask cpu 0 on node 0
[    0.000000] NUMA: set cpumask cpu 1 on node 0
[    0.000000] NUMA: set cpumask cpu 2 on node 0
[    0.000000] NUMA: set cpumask cpu 3 on node 0
[    0.000000] printk: bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 0014c004 (ICT Loongson-3)
[    0.000000] FPU revision is: 00f70501
[    0.000000] MSA revision is: 00060140
[    0.000000] OF: fdt: No chosen node found, continuing without
[    0.000000] MIPS: machine is loongson,loongson64g-4core-ls7a
[    0.000000] Initial ramdisk at: 0x9800000004000000 (27521633 bytes)
[    0.000000] software IO TLB: mapped [mem 0x0000000005a40000-0x0000000009a40000] (64MB)
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: Loongson Lemote-3A4000-7A-1w-V1.00-A1901/Lemote-3A4000-7A-1w-V1.00-A1901, BIOS Loongson-PMON-V3.3-20201222 12/22/2020
[    0.000000] Detected 4 available CPU(s)
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 64 bytes.
[    0.000000] Primary data cache 64kB, 4-way, VIPT, no aliases, linesize 64 bytes
[    0.000000] Unified victim cache 256kB 16-way, linesize 64 bytes.
[    0.000000] Unified secondary cache 8192kB 16-way, linesize 64 bytes.
[    0.000000] Zone ranges:
[    0.000000]   DMA32    [mem 0x0000000000200000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000045fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000200000-0x000000000effffff]
[    0.000000]   node   0: [mem 0x0000000090000000-0x000000045fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x000000045fffffff]
[    0.000000] On node 0, zone DMA32: 128 pages in unavailable ranges
[    0.000000] On node 0, zone DMA32: 1024 pages in unavailable ranges
[    0.000000] percpu: Embedded 14 pages/cpu s182944 r8192 d38240 u229376
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1010692
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: root=UUID=676d3782-f0ba-4864-b75e-a1dd6f4d48b8 ro console=ttyS0,115200 rd_start=0x84000000 rd_size=0x1a3f261 ethaddr=00:00:00:00:00:00
[    0.000000] Dentry cache hash table entries: 2097152 (order: 10, 16777216 bytes, linear)
[    0.000000] Inode-cache hash table entries: 1048576 (order: 9, 8388608 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.000000] Memory: 2156448K/16234496K available (10240K kernel code, 1659K rwdata, 2616K rodata, 880K init, 17522K bss, 247920K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 29285 entries in 29 pages
[    0.000000] ftrace: allocated 29 pages with 4 groups
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4.
[    0.000000]  Trampoline variant of Tasks RCU enabled.
[    0.000000]  Rude variant of Tasks RCU enabled.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 320
[    0.000000] ISA Bridge: /bus@10000000/isa
[    0.000000]  IO 0x0000000018000000..0x000000001801ffff  ->  0x0000000000000000
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 2123599122 ns
[    0.000003] sched_clock: 32 bits at 900MHz, resolution 1ns, wraps every 2386066431ns
[    0.007774] Console: colour dummy device 80x25
[    0.012172] Calibrating delay loop... 3592.19 BogoMIPS (lpj=7184384)
[    0.034347] pid_max: default: 32768 minimum: 301
[    0.039040] LSM: Security Framework initializing
[    0.043552] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.050208] AppArmor: AppArmor initialized
[    0.054194] TOMOYO Linux initialized
[    0.057807] Mount-cache hash table entries: 32768 (order: 4, 262144 bytes, linear)
[    0.065276] Mountpoint-cache hash table entries: 32768 (order: 4, 262144 bytes, linear)
[    0.074172] Performance counters: mips/loongson3 PMU enabled, 4 64-bit counters available to each CPU, irq 23
[    0.084011] rcu: Hierarchical SRCU implementation.
[    0.089148] smp: Bringing up secondary CPUs ...
[    0.093782] Booting CPU#1...
[    1.779093] Primary instruction cache 64kB, VIPT, 4-way, linesize 64 bytes.
[    1.779097] Primary data cache 64kB, 4-way, VIPT, no aliases, linesize 64 bytes
[    1.779100] Unified victim cache 256kB 16-way, linesize 64 bytes.
[    1.779103] Unified secondary cache 8192kB 16-way, linesize 64 bytes.
[    0.100959] CPU1 revision is: 0014c004 (ICT Loongson-3)
[    0.100965] FPU revision is: 00f70501
[    0.100968] MSA revision is: 00060140
[    0.113668] CPU#1 finished, CP0_ST=5400cce1
[    0.157258] Booting CPU#2...
[    1.842602] Primary instruction cache 64kB, VIPT, 4-way, linesize 64 bytes.
[    1.842606] Primary data cache 64kB, 4-way, VIPT, no aliases, linesize 64 bytes
[    1.842609] Unified victim cache 256kB 16-way, linesize 64 bytes.
[    1.842611] Unified secondary cache 8192kB 16-way, linesize 64 bytes.
[    0.163752] CPU2 revision is: 0014c004 (ICT Loongson-3)
[    0.163759] FPU revision is: 00f70501
[    0.163761] MSA revision is: 00060140
[    0.176112] CPU#2 finished, CP0_ST=5400cce1
[    0.219714] Booting CPU#3...
[    1.905050] Primary instruction cache 64kB, VIPT, 4-way, linesize 64 bytes.
[    1.905053] Primary data cache 64kB, 4-way, VIPT, no aliases, linesize 64 bytes
[    1.905057] Unified victim cache 256kB 16-way, linesize 64 bytes.
[    1.905059] Unified secondary cache 8192kB 16-way, linesize 64 bytes.
[    0.226210] CPU3 revision is: 0014c004 (ICT Loongson-3)
[    0.226217] FPU revision is: 00f70501
[    0.226219] MSA revision is: 00060140
[    0.238567] CPU#3 finished, CP0_ST=5400cce1
[    0.281809] smp: Brought up 1 node, 4 CPUs
[    0.303543] node 0 deferred pages initialised in 16ms
[    0.309119] devtmpfs: initialized
[    0.313384] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.323004] futex hash table entries: 1024 (order: 2, 65536 bytes, linear)
[    0.330416] NET: Registered protocol family 16
[    0.334821] audit: initializing netlink subsys (disabled)
[    0.340197] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1
[    0.340433] thermal_sys: Registered thermal governor 'fair_share'
[    0.347817] thermal_sys: Registered thermal governor 'bang_bang'
[    0.353858] thermal_sys: Registered thermal governor 'step_wise'
[    0.359819] thermal_sys: Registered thermal governor 'user_space'
[    0.365827] cpuidle: using governor ladder
[    0.375898] cpuidle: using governor menu
[    0.388524] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.737595] iommu: Default domain type: Translated 
[    0.742452] vgaarb: loaded
[    0.745171] SCSI subsystem initialized
[    0.749300] NetLabel: Initializing
[    0.752589] NetLabel:  domain hash size = 128
[    0.756929] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.762564] NetLabel:  unlabeled traffic allowed by default
[    0.768114] clocksource: Switched to clocksource MIPS
[    0.800593] VFS: Disk quotas dquot_6.6.0
[    0.804464] VFS: Dquot-cache hash table entries: 2048 (order 0, 16384 bytes)
[    0.811820] AppArmor: AppArmor Filesystem Enabled
[    0.819716] NET: Registered protocol family 2
[    0.824233] IP idents hash table entries: 262144 (order: 7, 2097152 bytes, linear)
[    0.835928] tcp_listen_portaddr_hash hash table entries: 8192 (order: 3, 131072 bytes, linear)
[    0.844598] TCP established hash table entries: 131072 (order: 6, 1048576 bytes, linear)
[    0.852882] TCP bind hash table entries: 65536 (order: 6, 1048576 bytes, linear)
[    0.860347] TCP: Hash tables configured (established 131072 bind 65536)
[    0.866932] UDP hash table entries: 8192 (order: 4, 262144 bytes, linear)
[    0.873673] UDP-Lite hash table entries: 8192 (order: 4, 262144 bytes, linear)
[    0.880897] NET: Registered protocol family 1
[    0.885154] NET: Registered protocol family 44
[    0.889552] PCI: CLS 0 bytes, default 64
[    0.893557] Trying to unpack rootfs image as initramfs...
[    1.551018] Freeing initrd memory: 26864K
[    1.555111] Starting KVM with MIPS VZ extensions
[    1.560565] Initialise system trusted keyrings
[    1.564938] Key type blacklist registered
[    1.569015] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[    1.578000] zbud: loaded
[    1.580828] integrity: Platform Keyring initialized
[    1.585595] Key type asymmetric registered
[    1.589650] Asymmetric key parser 'x509' registered
[    1.594507] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.601915] io scheduler mq-deadline registered
[    1.607246] loongson-pci 1a000000.pci: host bridge /bus@10000000/pci@1a000000 ranges:
[    1.614961] loongson-pci 1a000000.pci:   No bus range found for /bus@10000000/pci@1a000000, using [bus 00-ff]
[    1.624819] loongson-pci 1a000000.pci:       IO 0x0018020000..0x001803ffff -> 0x0000020000
[    1.633011] loongson-pci 1a000000.pci:      MEM 0x0040000000..0x007fffffff -> 0x0040000000
[    1.641291] loongson-pci 1a000000.pci: PCI host bridge to bus 0000:00
[    1.647610] pci_bus 0000:00: root bus resource [bus 00-ff]
[    1.653051] pci_bus 0000:00: root bus resource [io  0x20000-0x3ffff]
[    1.659357] pci_bus 0000:00: root bus resource [mem 0x40000000-0x7fffffff]
[    1.666244] pci 0000:00:00.0: [0014:7a00] type 00 class 0x060000
[    1.672147] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
[    1.681869] pci 0000:00:00.1: [0014:7a10] type 00 class 0x000000
[    1.687865] pci 0000:00:04.0: [0014:7a24] type 00 class 0x0c0310
[    1.693759] pci 0000:00:04.0: reg 0x10: [mem 0x49488000-0x4948ffff 64bit]
[    1.700581] pci 0000:00:04.1: [0014:7a14] type 00 class 0x0c0320
[    1.706475] pci 0000:00:04.1: reg 0x10: [mem 0x49480000-0x49487fff 64bit]
[    1.713298] pci 0000:00:05.0: [0014:7a24] type 00 class 0x0c0310
[    1.719189] pci 0000:00:05.0: reg 0x10: [mem 0x49478000-0x4947ffff 64bit]
[    1.725997] pci 0000:00:05.1: [0014:7a14] type 00 class 0x0c0320
[    1.731891] pci 0000:00:05.1: reg 0x10: [mem 0x49470000-0x49477fff 64bit]
[    1.738726] pci 0000:00:06.0: [0014:7a15] type 00 class 0x040000
[    1.744619] pci 0000:00:06.0: reg 0x10: [mem 0x49400000-0x4943ffff 64bit]
[    1.751354] pci 0000:00:06.0: reg 0x18: [mem 0x40000000-0x47ffffff 64bit]
[    1.758093] pci 0000:00:06.0: reg 0x20: [mem 0x49460000-0x4946ffff 64bit]
[    1.764905] pci 0000:00:06.1: [0014:7a06] type 00 class 0x038000
[    1.770800] pci 0000:00:06.1: reg 0x10: [mem 0x49450000-0x4945ffff 64bit]
[    1.777622] pci 0000:00:07.0: [0014:7a07] type 00 class 0x040300
[    1.783515] pci 0000:00:07.0: reg 0x10: [mem 0x49440000-0x4944ffff 64bit]
[    1.790343] pci 0000:00:08.0: [0014:7a08] type 00 class 0x010601
[    1.796236] pci 0000:00:08.0: reg 0x10: [mem 0x49494000-0x49495fff 64bit]
[    1.803049] pci 0000:00:08.1: [0014:7a08] type 00 class 0x010601
[    1.808942] pci 0000:00:08.1: reg 0x10: [mem 0x49492000-0x49493fff 64bit]
[    1.815755] pci 0000:00:08.2: [0014:7a08] type 00 class 0x010601
[    1.821648] pci 0000:00:08.2: reg 0x10: [mem 0x49490000-0x49491fff 64bit]
[    1.828478] pci 0000:00:09.0: [0014:7a19] type 01 class 0x060400
[    1.834371] pci 0000:00:09.0: reg 0x10: [mem 0x4949a000-0x4949afff 64bit]
[    1.841138] pci 0000:00:09.0: supports D1 D2
[    1.845334] pci 0000:00:09.0: PME# supported from D0 D1 D3hot D3cold
[    1.851772] pci 0000:00:0b.0: [0014:7a09] type 01 class 0x060400
[    1.857666] pci 0000:00:0b.0: reg 0x10: [mem 0x49499000-0x49499fff 64bit]
[    1.864435] pci 0000:00:0b.0: supports D1 D2
[    1.868629] pci 0000:00:0b.0: PME# supported from D0 D1 D3hot D3cold
[    1.875055] pci 0000:00:0d.0: [0014:7a19] type 01 class 0x060400
[    1.880947] pci 0000:00:0d.0: reg 0x10: [mem 0x49498000-0x49498fff 64bit]
[    1.887708] pci 0000:00:0d.0: supports D1 D2
[    1.891910] pci 0000:00:0d.0: PME# supported from D0 D1 D3hot D3cold
[    1.898335] pci 0000:00:0e.0: [0014:7a09] type 01 class 0x060400
[    1.904255] pci 0000:00:0e.0: reg 0x10: [mem 0x49497000-0x49497fff 64bit]
[    1.910989] pci 0000:00:0e.0: supports D1 D2
[    1.915191] pci 0000:00:0e.0: PME# supported from D0 D1 D3hot D3cold
[    1.921646] pci 0000:00:16.0: [0014:7a0b] type 00 class 0x088000
[    1.927539] pci 0000:00:16.0: reg 0x10: [mem 0x49496000-0x49496fff 64bit]
[    1.934273] pci 0000:00:16.0: reg 0x18: [mem 0x48000000-0x48ffffff 64bit]
[    1.941096] pci 0000:00:17.0: [0014:7a0c] type 00 class 0x060100
[    1.947182] pci 0000:01:00.0: [1b21:0612] type 00 class 0x010601
[    1.953068] pci_bus 0000:01: 2-byte config write to 0000:01:00.0 offset 0x4 may corrupt adjacent RW1C bits
[    1.962672] pci 0000:01:00.0: reg 0x10: [io  0x23038-0x2303f]
[    1.968367] pci 0000:01:00.0: reg 0x14: [io  0x23030-0x23033]
[    1.974069] pci 0000:01:00.0: reg 0x18: [io  0x23028-0x2302f]
[    1.979773] pci 0000:01:00.0: reg 0x1c: [io  0x23020-0x23023]
[    1.985473] pci 0000:01:00.0: reg 0x20: [io  0x23000-0x2301f]
[    1.991179] pci 0000:01:00.0: reg 0x24: [mem 0x49310000-0x493101ff]
[    1.997397] pci 0000:01:00.0: reg 0x30: [mem 0x49300000-0x4930ffff pref]
[    2.004345] pci 0000:00:09.0: PCI bridge to [bus 01-ff]
[    2.009455] pci 0000:00:09.0:   bridge window [io  0x23000-0x23fff]
[    2.015672] pci 0000:00:09.0:   bridge window [mem 0x49300000-0x493fffff]
[    2.022415] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    2.029064] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    2.034950] pci_bus 0000:02: 2-byte config write to 0000:02:00.0 offset 0x4 may corrupt adjacent RW1C bits
[    2.044560] pci 0000:02:00.0: reg 0x10: [io  0x22000-0x220ff]
[    2.050271] pci 0000:02:00.0: reg 0x18: [mem 0x49204000-0x49204fff 64bit]
[    2.056997] pci 0000:02:00.0: reg 0x20: [mem 0x49200000-0x49203fff 64bit pref]
[    2.064265] pci 0000:02:00.0: supports D1 D2
[    2.068420] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    2.084300] pci 0000:00:0b.0: PCI bridge to [bus 02-ff]
[    2.089410] pci 0000:00:0b.0:   bridge window [io  0x22000-0x22fff]
[    2.095629] pci 0000:00:0b.0:   bridge window [mem 0x49200000-0x492fffff]
[    2.102369] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
[    2.109014] pci 0000:03:00.0: [1912:0014] type 00 class 0x0c0330
[    2.114901] pci_bus 0000:03: 2-byte config write to 0000:03:00.0 offset 0x4 may corrupt adjacent RW1C bits
[    2.124522] pci 0000:03:00.0: reg 0x10: [mem 0x49100000-0x49101fff 64bit]
[    2.131405] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    2.148294] pci 0000:00:0d.0: PCI bridge to [bus 03-ff]
[    2.153402] pci 0000:00:0d.0:   bridge window [io  0x21000-0x21fff]
[    2.159635] pci 0000:00:0d.0:   bridge window [mem 0x49100000-0x491fffff]
[    2.166363] pci_bus 0000:03: busn_res: [bus 03-ff] end is updated to 03
[    2.172996] pci 0000:04:00.0: [1b21:1142] type 00 class 0x0c0330
[    2.178890] pci_bus 0000:04: 2-byte config write to 0000:04:00.0 offset 0x4 may corrupt adjacent RW1C bits
[    2.188505] pci 0000:04:00.0: reg 0x10: [mem 0x49000000-0x49007fff 64bit]
[    2.195344] pci 0000:04:00.0: PME# supported from D3hot D3cold
[    2.212287] pci 0000:00:0e.0: PCI bridge to [bus 04-ff]
[    2.217396] pci 0000:00:0e.0:   bridge window [io  0x20000-0x20fff]
[    2.223615] pci 0000:00:0e.0:   bridge window [mem 0x49000000-0x490fffff]
[    2.230355] pci_bus 0000:04: busn_res: [bus 04-ff] end is updated to 04
[    2.236951] pci 0000:00:06.0: BAR 2: assigned [mem 0x40000000-0x47ffffff 64bit]
[    2.244183] pci 0000:00:16.0: BAR 2: assigned [mem 0x48000000-0x48ffffff 64bit]
[    2.251438] pci 0000:00:09.0: BAR 14: assigned [mem 0x49000000-0x490fffff]
[    2.258260] pci 0000:00:0b.0: BAR 14: assigned [mem 0x49100000-0x491fffff]
[    2.265086] pci 0000:00:0b.0: BAR 15: assigned [mem 0x49200000-0x492fffff 64bit pref]
[    2.272861] pci 0000:00:0d.0: BAR 14: assigned [mem 0x49300000-0x493fffff]
[    2.279686] pci 0000:00:0e.0: BAR 14: assigned [mem 0x49400000-0x494fffff]
[    2.286512] pci 0000:00:06.0: BAR 0: assigned [mem 0x49500000-0x4953ffff 64bit]
[    2.293775] pci 0000:00:06.0: BAR 4: assigned [mem 0x49540000-0x4954ffff 64bit]
[    2.301032] pci 0000:00:06.1: BAR 0: assigned [mem 0x49550000-0x4955ffff 64bit]
[    2.308288] pci 0000:00:07.0: BAR 0: assigned [mem 0x49560000-0x4956ffff 64bit]
[    2.315546] pci 0000:00:04.0: BAR 0: assigned [mem 0x49570000-0x49577fff 64bit]
[    2.322803] pci 0000:00:04.1: BAR 0: assigned [mem 0x49578000-0x4957ffff 64bit]
[    2.330061] pci 0000:00:05.0: BAR 0: assigned [mem 0x49580000-0x49587fff 64bit]
[    2.337321] pci 0000:00:05.1: BAR 0: assigned [mem 0x49588000-0x4958ffff 64bit]
[    2.344576] pci 0000:00:08.0: BAR 0: assigned [mem 0x49590000-0x49591fff 64bit]
[    2.351834] pci 0000:00:08.1: BAR 0: assigned [mem 0x49592000-0x49593fff 64bit]
[    2.359091] pci 0000:00:08.2: BAR 0: assigned [mem 0x49594000-0x49595fff 64bit]
[    2.366349] pci 0000:00:09.0: BAR 0: assigned [mem 0x49596000-0x49596fff 64bit]
[    2.373604] pci 0000:00:09.0: BAR 13: assigned [io  0x20000-0x20fff]
[    2.379910] pci 0000:00:0b.0: BAR 0: assigned [mem 0x49597000-0x49597fff 64bit]
[    2.387169] pci 0000:00:0b.0: BAR 13: assigned [io  0x21000-0x21fff]
[    2.393474] pci 0000:00:0d.0: BAR 0: assigned [mem 0x49598000-0x49598fff 64bit]
[    2.400735] pci 0000:00:0d.0: BAR 13: assigned [io  0x22000-0x22fff]
[    2.407039] pci 0000:00:0e.0: BAR 0: assigned [mem 0x49599000-0x49599fff 64bit]
[    2.414298] pci 0000:00:0e.0: BAR 13: assigned [io  0x23000-0x23fff]
[    2.420604] pci 0000:00:16.0: BAR 0: assigned [mem 0x4959a000-0x4959afff 64bit]
[    2.427871] pci 0000:01:00.0: BAR 6: assigned [mem 0x49000000-0x4900ffff pref]
[    2.435034] pci 0000:01:00.0: BAR 5: assigned [mem 0x49010000-0x490101ff]
[    2.441773] pci 0000:01:00.0: BAR 4: assigned [io  0x20000-0x2001f]
[    2.447994] pci 0000:01:00.0: BAR 0: assigned [io  0x20020-0x20027]
[    2.454215] pci 0000:01:00.0: BAR 2: assigned [io  0x20028-0x2002f]
[    2.460437] pci 0000:01:00.0: BAR 1: assigned [io  0x20030-0x20033]
[    2.466656] pci 0000:01:00.0: BAR 3: assigned [io  0x20034-0x20037]
[    2.472878] pci 0000:00:09.0: PCI bridge to [bus 01]
[    2.477802] pci 0000:00:09.0:   bridge window [io  0x20000-0x20fff]
[    2.484022] pci 0000:00:09.0:   bridge window [mem 0x49000000-0x490fffff]
[    2.490764] pci 0000:02:00.0: BAR 4: assigned [mem 0x49200000-0x49203fff 64bit pref]
[    2.498462] pci 0000:02:00.0: BAR 2: assigned [mem 0x49100000-0x49100fff 64bit]
[    2.505720] pci 0000:02:00.0: BAR 0: assigned [io  0x21000-0x210ff]
[    2.511930] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    2.516852] pci 0000:00:0b.0:   bridge window [io  0x21000-0x21fff]
[    2.523074] pci 0000:00:0b.0:   bridge window [mem 0x49100000-0x491fffff]
[    2.529812] pci 0000:00:0b.0:   bridge window [mem 0x49200000-0x492fffff 64bit pref]
[    2.537504] pci 0000:03:00.0: BAR 0: assigned [mem 0x49300000-0x49301fff 64bit]
[    2.544774] pci 0000:00:0d.0: PCI bridge to [bus 03]
[    2.549683] pci 0000:00:0d.0:   bridge window [io  0x22000-0x22fff]
[    2.555905] pci 0000:00:0d.0:   bridge window [mem 0x49300000-0x493fffff]
[    2.562647] pci 0000:04:00.0: BAR 0: assigned [mem 0x49400000-0x49407fff 64bit]
[    2.569912] pci 0000:00:0e.0: PCI bridge to [bus 04]
[    2.574825] pci 0000:00:0e.0:   bridge window [io  0x23000-0x23fff]
[    2.581047] pci 0000:00:0e.0:   bridge window [mem 0x49400000-0x494fffff]
[    2.587815] pci 0000:00:04.0: enabling device (0040 -> 0042)
[    2.593418] pci 0000:00:04.1: EHCI: unrecognized capability ff
[    2.599190] pci 0000:00:04.1: EHCI: unrecognized capability ff
[    2.604978] pci 0000:00:04.1: EHCI: unrecognized capability ff
[    2.610768] pci 0000:00:04.1: EHCI: unrecognized capability ff
[    2.616556] pci 0000:00:04.1: EHCI: unrecognized capability ff
[    2.622344] pci 0000:00:04.1: EHCI: unrecognized capability ff
[    2.628133] pci 0000:00:04.1: EHCI: unrecognized capability ff
[    2.633922] pci 0000:00:04.1: EHCI: unrecognized capability ff
[    2.639710] pci 0000:00:04.1: EHCI: unrecognized capability ff
[    2.645499] pci 0000:00:04.1: EHCI: unrecognized capability ff
[    2.651288] pci 0000:00:04.1: EHCI: unrecognized capability ff
[    2.657077] pci 0000:00:04.1: EHCI: unrecognized capability ff
[    2.662865] pci 0000:00:04.1: EHCI: unrecognized capability ff
[    2.668654] pci 0000:00:04.1: EHCI: unrecognized capability ff
[    2.674443] pci 0000:00:04.1: EHCI: unrecognized capability ff
[    2.680232] pci 0000:00:04.1: EHCI: unrecognized capability ff
[    2.686020] pci 0000:00:04.1: EHCI: unrecognized capability ff
[    2.691809] pci 0000:00:04.1: EHCI: unrecognized capability ff
[    2.697598] pci 0000:00:04.1: EHCI: unrecognized capability ff
[    2.703386] pci 0000:00:04.1: EHCI: unrecognized capability ff
[    2.709177] pci 0000:00:04.1: EHCI: unrecognized capability ff
[    2.714965] pci 0000:00:04.1: EHCI: unrecognized capability ff
[    2.720753] pci 0000:00:04.1: EHCI: unrecognized capability ff
[    2.726541] pci 0000:00:04.1: EHCI: unrecognized capability ff
[    2.732330] pci 0000:00:04.1: EHCI: unrecognized capability ff
[    2.738119] pci 0000:00:04.1: EHCI: unrecognized capability ff
[    2.743908] pci 0000:00:04.1: EHCI: unrecognized capability ff
[    2.749696] pci 0000:00:04.1: EHCI: unrecognized capability ff
[    2.755485] pci 0000:00:04.1: EHCI: unrecognized capability ff
[    2.761274] pci 0000:00:04.1: EHCI: unrecognized capability ff
[    2.767062] pci 0000:00:04.1: EHCI: unrecognized capability ff
[    2.772851] pci 0000:00:04.1: EHCI: unrecognized capability ff
[    2.778640] pci 0000:00:04.1: EHCI: unrecognized capability ff
[    2.784429] pci 0000:00:04.1: EHCI: unrecognized capability ff
[    2.790218] pci 0000:00:04.1: EHCI: unrecognized capability ff
[    2.796006] pci 0000:00:04.1: EHCI: unrecognized capability ff
[    2.801795] pci 0000:00:04.1: EHCI: unrecognized capability ff
[    2.807584] pci 0000:00:04.1: EHCI: unrecognized capability ff
[    2.813372] pci 0000:00:04.1: EHCI: unrecognized capability ff
[    2.819162] pci 0000:00:04.1: EHCI: unrecognized capability ff
[    2.824950] pci 0000:00:04.1: EHCI: unrecognized capability ff
[    2.830739] pci 0000:00:04.1: EHCI: unrecognized capability ff
[    2.836529] pci 0000:00:04.1: EHCI: unrecognized capability ff
[    2.842316] pci 0000:00:04.1: EHCI: unrecognized capability ff
[    2.848107] pci 0000:00:04.1: EHCI: unrecognized capability ff
[    2.853894] pci 0000:00:04.1: EHCI: unrecognized capability ff
[    2.859682] pci 0000:00:04.1: EHCI: unrecognized capability ff
[    2.865471] pci 0000:00:04.1: EHCI: unrecognized capability ff
[    2.871260] pci 0000:00:04.1: EHCI: unrecognized capability ff
[    2.877049] pci 0000:00:04.1: EHCI: unrecognized capability ff
[    2.882837] pci 0000:00:04.1: EHCI: unrecognized capability ff
[    2.888626] pci 0000:00:04.1: EHCI: unrecognized capability ff
[    2.894415] pci 0000:00:04.1: EHCI: unrecognized capability ff
[    2.900204] pci 0000:00:04.1: EHCI: unrecognized capability ff
[    2.905992] pci 0000:00:04.1: EHCI: unrecognized capability ff
[    2.911781] pci 0000:00:04.1: EHCI: unrecognized capability ff
[    2.917570] pci 0000:00:04.1: EHCI: unrecognized capability ff
[    2.923359] pci 0000:00:04.1: EHCI: unrecognized capability ff
[    2.929164] pci 0000:00:04.1: EHCI: unrecognized capability ff
[    2.934937] pci 0000:00:04.1: EHCI: unrecognized capability ff
[    2.940725] pci 0000:00:04.1: EHCI: unrecognized capability ff
[    2.946513] pci 0000:00:04.1: EHCI: unrecognized capability ff
[    2.952302] pci 0000:00:04.1: EHCI: unrecognized capability ff
[    2.958106] pci 0000:00:04.1: quirk_usb_early_handoff+0x0/0xb38 took 356136 usecs
[    2.965530] pci 0000:00:05.0: enabling device (0040 -> 0042)
[    2.971151] pci 0000:00:05.1: EHCI: unrecognized capability ff
[    2.976926] pci 0000:00:05.1: EHCI: unrecognized capability ff
[    2.982715] pci 0000:00:05.1: EHCI: unrecognized capability ff
[    2.988503] pci 0000:00:05.1: EHCI: unrecognized capability ff
[    2.994292] pci 0000:00:05.1: EHCI: unrecognized capability ff
[    3.000081] pci 0000:00:05.1: EHCI: unrecognized capability ff
[    3.005870] pci 0000:00:05.1: EHCI: unrecognized capability ff
[    3.011658] pci 0000:00:05.1: EHCI: unrecognized capability ff
[    3.017447] pci 0000:00:05.1: EHCI: unrecognized capability ff
[    3.023236] pci 0000:00:05.1: EHCI: unrecognized capability ff
[    3.029026] pci 0000:00:05.1: EHCI: unrecognized capability ff
[    3.034813] pci 0000:00:05.1: EHCI: unrecognized capability ff
[    3.040602] pci 0000:00:05.1: EHCI: unrecognized capability ff
[    3.046391] pci 0000:00:05.1: EHCI: unrecognized capability ff
[    3.052179] pci 0000:00:05.1: EHCI: unrecognized capability ff
[    3.057968] pci 0000:00:05.1: EHCI: unrecognized capability ff
[    3.063757] pci 0000:00:05.1: EHCI: unrecognized capability ff
[    3.069546] pci 0000:00:05.1: EHCI: unrecognized capability ff
[    3.075334] pci 0000:00:05.1: EHCI: unrecognized capability ff
[    3.081123] pci 0000:00:05.1: EHCI: unrecognized capability ff
[    3.086912] pci 0000:00:05.1: EHCI: unrecognized capability ff
[    3.092702] pci 0000:00:05.1: EHCI: unrecognized capability ff
[    3.098489] pci 0000:00:05.1: EHCI: unrecognized capability ff
[    3.104278] pci 0000:00:05.1: EHCI: unrecognized capability ff
[    3.110067] pci 0000:00:05.1: EHCI: unrecognized capability ff
[    3.115856] pci 0000:00:05.1: EHCI: unrecognized capability ff
[    3.121646] pci 0000:00:05.1: EHCI: unrecognized capability ff
[    3.127433] pci 0000:00:05.1: EHCI: unrecognized capability ff
[    3.133223] pci 0000:00:05.1: EHCI: unrecognized capability ff
[    3.139010] pci 0000:00:05.1: EHCI: unrecognized capability ff
[    3.144799] pci 0000:00:05.1: EHCI: unrecognized capability ff
[    3.150588] pci 0000:00:05.1: EHCI: unrecognized capability ff
[    3.156377] pci 0000:00:05.1: EHCI: unrecognized capability ff
[    3.162165] pci 0000:00:05.1: EHCI: unrecognized capability ff
[    3.167954] pci 0000:00:05.1: EHCI: unrecognized capability ff
[    3.173743] pci 0000:00:05.1: EHCI: unrecognized capability ff
[    3.179532] pci 0000:00:05.1: EHCI: unrecognized capability ff
[    3.185320] pci 0000:00:05.1: EHCI: unrecognized capability ff
[    3.191109] pci 0000:00:05.1: EHCI: unrecognized capability ff
[    3.196898] pci 0000:00:05.1: EHCI: unrecognized capability ff
[    3.202687] pci 0000:00:05.1: EHCI: unrecognized capability ff
[    3.208476] pci 0000:00:05.1: EHCI: unrecognized capability ff
[    3.214264] pci 0000:00:05.1: EHCI: unrecognized capability ff
[    3.220054] pci 0000:00:05.1: EHCI: unrecognized capability ff
[    3.225842] pci 0000:00:05.1: EHCI: unrecognized capability ff
[    3.231630] pci 0000:00:05.1: EHCI: unrecognized capability ff
[    3.237420] pci 0000:00:05.1: EHCI: unrecognized capability ff
[    3.243208] pci 0000:00:05.1: EHCI: unrecognized capability ff
[    3.248996] pci 0000:00:05.1: EHCI: unrecognized capability ff
[    3.254785] pci 0000:00:05.1: EHCI: unrecognized capability ff
[    3.260574] pci 0000:00:05.1: EHCI: unrecognized capability ff
[    3.266363] pci 0000:00:05.1: EHCI: unrecognized capability ff
[    3.272151] pci 0000:00:05.1: EHCI: unrecognized capability ff
[    3.277940] pci 0000:00:05.1: EHCI: unrecognized capability ff
[    3.283729] pci 0000:00:05.1: EHCI: unrecognized capability ff
[    3.289518] pci 0000:00:05.1: EHCI: unrecognized capability ff
[    3.295306] pci 0000:00:05.1: EHCI: unrecognized capability ff
[    3.301095] pci 0000:00:05.1: EHCI: unrecognized capability ff
[    3.306884] pci 0000:00:05.1: EHCI: unrecognized capability ff
[    3.312673] pci 0000:00:05.1: EHCI: unrecognized capability ff
[    3.318461] pci 0000:00:05.1: EHCI: unrecognized capability ff
[    3.324250] pci 0000:00:05.1: EHCI: unrecognized capability ff
[    3.330039] pci 0000:00:05.1: EHCI: unrecognized capability ff
[    3.335834] pci 0000:00:05.1: quirk_usb_early_handoff+0x0/0xb38 took 356137 usecs
[    3.343467] pcieport 0000:00:09.0: PME: Signaling with IRQ 3
[    3.349154] pcieport 0000:00:09.0: AER: enabled with IRQ 3
[    3.354738] pcieport 0000:00:0b.0: PME: Signaling with IRQ 5
[    3.360375] pcieport 0000:00:0b.0: AER: enabled with IRQ 5
[    3.365888] pcieport 0000:00:0d.0: PME: Signaling with IRQ 7
[    3.371520] pcieport 0000:00:0d.0: AER: enabled with IRQ 7
[    3.377020] pcieport 0000:00:0e.0: PME: Signaling with IRQ 9
[    3.382652] pcieport 0000:00:0e.0: AER: enabled with IRQ 9
[    3.388367] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    3.395326] printk: console [ttyS0] disabled
[    3.399525] 1fe00100.serial: ttyS0 at MMIO 0x1fe00100 (irq = 10, base_baud = 6250000) is a 16550A
[    3.408329] printk: console [ttyS0] enabled
[    3.408329] printk: console [ttyS0] enabled
[    3.416596] printk: bootconsole [early0] disabled
[    3.416596] printk: bootconsole [early0] disabled
[    3.426182] 10080000.serial: ttyS1 at MMIO 0x10080000 (irq = 1, base_baud = 3125000) is a 16550A
[    3.435516] ahci 0000:00:08.0: SSS flag set, parallel bus scan disabled
[    3.442118] ahci 0000:00:08.0: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
[    3.450166] ahci 0000:00:08.0: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part ccc apst 
[    3.459678] scsi host0: ahci
[    3.462702] ata1: SATA max UDMA/133 abar m8192@0x49590000 port 0x49590100 irq 11
[    3.470148] ahci 0000:00:08.1: SSS flag set, parallel bus scan disabled
[    3.476738] ahci 0000:00:08.1: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
[    3.484784] ahci 0000:00:08.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part ccc apst 
[    3.494258] scsi host1: ahci
[    3.497205] ata2: SATA max UDMA/133 abar m8192@0x49592000 port 0x49592100 irq 12
[    3.504642] ahci 0000:00:08.2: SSS flag set, parallel bus scan disabled
[    3.511239] ahci 0000:00:08.2: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
[    3.519285] ahci 0000:00:08.2: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part ccc apst 
[    3.528749] scsi host2: ahci
[    3.531696] ata3: SATA max UDMA/133 abar m8192@0x49594000 port 0x49594100 irq 13
[    3.539191] ahci 0000:01:00.0: SSS flag set, parallel bus scan disabled
[    3.545805] ahci 0000:01:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    3.553853] ahci 0000:01:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs 
[    3.562692] scsi host3: ahci
[    3.565764] scsi host4: ahci
[    3.568717] ata4: SATA max UDMA/133 abar m512@0x49010000 port 0x49010100 irq 14
[    3.575994] ata5: SATA max UDMA/133 abar m512@0x49010000 port 0x49010180 irq 14
[    3.609616] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.614720] mousedev: PS/2 mouse device common for all mice
[    3.620471] ledtrig-cpu: registered to indicate activity on CPUs
[    3.626587] Loongson Hwmon Enter...
[    3.630507] NET: Registered protocol family 10
[    3.635935] process '/usr/bin/kmod' started with executable stack
[    3.654708] Segment Routing with IPv6
[    3.658395] mip6: Mobile IPv6
[    3.661347] NET: Registered protocol family 17
[    3.665827] mpls_gso: MPLS GSO support
[    3.669776] registered taskstats version 1
[    3.673860] Loading compiled-in X.509 certificates
[    3.710125] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[    3.718816] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f'
[    3.728944] Problem parsing in-kernel X.509 certificate list
[    3.734643] zswap: loaded using pool lzo/zbud
[    3.739195] Key type .fscrypt registered
[    3.743106] Key type fscrypt-provisioning registered
[    3.748149] AppArmor: AppArmor sha1 policy hashing enabled
[    3.786297] ata1: SATA link down (SStatus 0 SControl 300)
[    3.822273] ata2: SATA link down (SStatus 0 SControl 300)
[    3.857993] ata3: SATA link down (SStatus 0 SControl 300)
[    4.060125] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    4.066391] ata4.00: ATA-10: INTEL SSDSC2KG480G8, XCV10132, max UDMA/133
[    4.073055] ata4.00: 937703088 sectors, multi 1: LBA48 NCQ (depth 32)
[    4.079578] ata4.00: configured for UDMA/133
[    4.094154] scsi 3:0:0:0: Direct-Access     ATA      INTEL SSDSC2KG48 0132 PQ: 0 ANSI: 5
[    4.102460] ata4.00: Enabling discard_zeroes_data
[    4.107220] sd 3:0:0:0: [sda] 937703088 512-byte logical blocks: (480 GB/447 GiB)
[    4.114675] sd 3:0:0:0: [sda] 4096-byte physical blocks
[    4.119890] sd 3:0:0:0: [sda] Write Protect is off
[    4.124684] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.133939] ata4.00: Enabling discard_zeroes_data
[    4.139175]  sda: sda1 sda2 sda3
[    4.156185] ata4.00: Enabling discard_zeroes_data
[    4.160999] sd 3:0:0:0: [sda] Attached SCSI disk
[    4.426306] ata5: SATA link down (SStatus 0 SControl 300)
[    4.435949] Freeing unused kernel memory: 880K
[    4.440370] This architecture does not have kernel memory protection.
[    4.446779] Run /init as init process
Loading, please wait...
Starting version 247.3-7+deb11u2
[    4.545813] usbcore: registered new interface driver usbfs
[    4.551311] usbcore: registered new interface driver hub
[    4.557132] usbcore: registered new device driver usb
[    4.564031] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.574199] ehci-pci: EHCI PCI platform driver
[    4.579654] ehci-pci 0000:00:04.1: EHCI Host Controller
[    4.584959] ehci-pci 0000:00:04.1: new USB bus registered, assigned bus number 1
[    4.593209] ehci-pci 0000:00:04.1: Enabling legacy PCI PM
[    4.598878] ehci-pci 0000:00:04.1: cache line size of 64 is not supported
[    4.605915] ehci-pci 0000:00:04.1: irq 15, io mem 0x49578000
[    4.614078] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.624133] ehci-pci 0000:00:04.1: USB f.f started, EHCI 1.00
[    4.630030] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    4.638276] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.645952] usb usb1: Product: EHCI Host Controller
[    4.650814] usb usb1: Manufacturer: Linux 5.10.0-22-loongson-3 ehci_hcd
[    4.652132] atkbd serio0: keyboard reset failed on isa0060/serio0
[    4.657905] r8169 0000:02:00.0 eth0: RTL8168g/8111g, 1c:83:41:27:ee:cc, XID 4c0, IRQ 32
[    4.671441] usb usb1: SerialNumber: 0000:00:04.1
[    4.676152] r8169 0000:02:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[    4.680019] random: lvm: uninitialized urandom read (4 bytes read)
[    4.684838] hub 1-0:1.0: USB hub found
[    4.694555] hub 1-0:1.0: 3 ports detected
[    4.697608] r8169 0000:02:00.0 enp2s0: renamed from eth0
[    4.699102] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    4.709114] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
[    4.721932] xhci_hcd 0000:03:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x0000001100000410
[    4.731973] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    4.732125] device-mapper: uevent: version 1.0.3
[    4.737178] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
[    4.741895] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
[    4.749118] xhci_hcd 0000:03:00.0: Host supports USB 3.0 SuperSpeed
[    4.749251] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    4.764903] random: lvm: uninitialized urandom read (2 bytes read)
[    4.771964] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.785291] usb usb2: Product: xHCI Host Controller
[    4.790151] usb usb2: Manufacturer: Linux 5.10.0-22-loongson-3 xhci-hcd
[    4.796740] usb usb2: SerialNumber: 0000:03:00.0
[    4.801498] ehci-pci 0000:00:05.1: EHCI Host Controller
[    4.808011] hub 2-0:1.0: USB hub found
[    4.811784] hub 2-0:1.0: 4 ports detected
[    4.816079] ehci-pci 0000:00:05.1: new USB bus registered, assigned bus number 4
[    4.823568] ehci-pci 0000:00:05.1: Enabling legacy PCI PM
[    4.828984] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.837091] ehci-pci 0000:00:05.1: cache line size of 64 is not supported
[    4.843882] ehci-pci 0000:00:05.1: irq 33, io mem 0x49588000
[    4.849581] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[    4.857809] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.865008] usb usb3: Product: xHCI Host Controller
[    4.869864] usb usb3: Manufacturer: Linux 5.10.0-22-loongson-3 xhci-hcd
[    4.876448] usb usb3: SerialNumber: 0000:03:00.0
[    4.881054] ehci-pci 0000:00:05.1: USB f.f started, EHCI 1.00
[    4.887169] hub 3-0:1.0: USB hub found
[    4.890941] hub 3-0:1.0: 4 ports detected
[    4.895287] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    4.903621] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.910843] usb usb4: Product: EHCI Host Controller
[    4.915708] usb usb4: Manufacturer: Linux 5.10.0-22-loongson-3 ehci_hcd
[    4.922298] usb usb4: SerialNumber: 0000:00:05.1
[    4.927217] hub 4-0:1.0: USB hub found
[    4.930978] hub 4-0:1.0: 3 ports detected
[    4.935207] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    4.940496] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 5
[    4.948698] ohci-pci: OHCI PCI platform driver
[    5.008468] xhci_hcd 0000:04:00.0: hcc params 0x0200e080 hci version 0x100 quirks 0x0000000010800410
[    5.017946] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    5.023146] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 6
[    5.030505] xhci_hcd 0000:04:00.0: Host supports USB 3.0 SuperSpeed
[    5.036845] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    5.045069] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.052250] usb usb5: Product: xHCI Host Controller
[    5.057099] usb usb5: Manufacturer: Linux 5.10.0-22-loongson-3 xhci-hcd
[    5.063676] usb usb5: SerialNumber: 0000:04:00.0
[    5.068393] ohci-pci 0000:00:04.0: OHCI PCI host controller
[    5.075424] hub 5-0:1.0: USB hub found
[    5.079166] hub 5-0:1.0: 2 ports detected
[    5.083313] ohci-pci 0000:00:04.0: new USB bus registered, assigned bus number 7
[    5.091005] ohci-pci 0000:00:04.0: irq 39, io mem 0x49570000
[    5.096669] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    5.104763] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[    5.112980] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.120217] usb usb6: Product: xHCI Host Controller
[    5.125064] usb usb6: Manufacturer: Linux 5.10.0-22-loongson-3 xhci-hcd
[    5.131638] usb usb6: SerialNumber: 0000:04:00.0
[    5.136789] hub 6-0:1.0: USB hub found
[    5.140744] hub 6-0:1.0: 2 ports detected
[    5.160215] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[    5.168544] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.175727] usb usb7: Product: OHCI PCI host controller
[    5.180974] usb usb7: Manufacturer: Linux 5.10.0-22-loongson-3 ohci_hcd
[    5.187549] usb usb7: SerialNumber: 0000:00:04.0
[    5.192670] hub 7-0:1.0: USB hub found
[    5.196410] hub 7-0:1.0: 3 ports detected
[    5.200401] usb 1-2: new high-speed USB device number 2 using ehci-pci
[    5.207228] ohci-pci 0000:00:05.0: OHCI PCI host controller
[    5.213132] ohci-pci 0000:00:05.0: new USB bus registered, assigned bus number 8
[    5.220536] ohci-pci 0000:00:05.0: irq 45, io mem 0x49580000
[    5.288588] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[    5.296835] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.304014] usb usb8: Product: OHCI PCI host controller
[    5.309207] usb usb8: Manufacturer: Linux 5.10.0-22-loongson-3 ohci_hcd
[    5.315781] usb usb8: SerialNumber: 0000:00:05.0
[    5.320610] hub 8-0:1.0: USB hub found
[    5.324350] hub 8-0:1.0: 3 ports detected
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
Begin: Will now check root file system ... fsck from util-linux 2.36.1
[    5.380857] usb 1-2: New USB device found, idVendor=0b95, idProduct=772b, bcdDevice= 0.01
[/sbin/fsck.ext4[    5.389036] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
 (1) -- /dev/sda[    5.397568] usb 1-2: Product: AX88772B
2] fsck.ext4 -a [    5.402635] usb 1-2: Manufacturer: ASIX Elec. Corp.
-C0 /dev/sda2 
[    5.408858] usb 1-2: SerialNumber: 000006
/dev/sda2: clean, 72439/915712 files, 1023722/3662080 blocks
[   31.120122] random: crng init done
[   35.912147] ata4.00: exception Emask 0x0 SAct 0x20000000 SErr 0x0 action 0x6 frozen
[   35.919769] ata4.00: failed command: WRITE FPDMA QUEUED
[   35.924968] ata4.00: cmd 61/20:e8:00:f0:e1/00:00:00:00:00/40 tag 29 ncq dma 16384 out
[   35.924968]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[   35.940097] ata4.00: status: { DRDY }
[   35.943743] ata4: hard resetting link
[   36.424126] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   36.430548] ata4.00: configured for UDMA/133
[   36.434799] ata4.00: device reported invalid CHS sector 0
[   36.440187] ata4: EH complete
[   36.443276] ata4.00: Enabling discard_zeroes_data
[   66.620125] ata4.00: exception Emask 0x0 SAct 0x10 SErr 0x0 action 0x6 frozen
[   66.627225] ata4.00: failed command: WRITE FPDMA QUEUED
[   66.632421] ata4.00: cmd 61/20:20:00:f0:e1/00:00:00:00:00/40 tag 4 ncq dma 16384 out
[   66.632421]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[   66.647464] ata4.00: status: { DRDY }
[   66.651103] ata4: hard resetting link
[   67.128124] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   72.236116] ata4.00: qc timeout (cmd 0xec)
[   72.240193] ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[   72.246251] ata4.00: revalidation failed (errno=-5)
[   72.251100] ata4: hard resetting link
[   82.248353] ata4: softreset failed (1st FIS failed)
[   82.253202] ata4: hard resetting link
[   92.252366] ata4: softreset failed (1st FIS failed)
[   92.257216] ata4: hard resetting link
[  127.257035] ata4: softreset failed (1st FIS failed)
[  127.261886] ata4: limiting SATA link speed to 3.0 Gbps
[  127.266993] ata4: hard resetting link
[  132.264698] ata4: softreset failed (1st FIS failed)
[  132.269550] ata4: reset failed, giving up
[  132.273532] ata4.00: disabled
[  132.276512] ata4: EH complete
[  132.279474] sd 3:0:0:0: [sda] tag#2 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=126s
[  132.289250] sd 3:0:0:0: [sda] tag#2 CDB: Write(10) 2a 00 00 e1 f0 00 00 00 20 00
[  132.296603] blk_update_request: I/O error, dev sda, sector 14807040 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[  132.307239] Buffer I/O error on dev sda2, logical block 401664, lost async page write
done.
[  132.318716] sd 3:0:0:0: [sda] tag#4 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[  132.328332] sd 3:0:0:0: [sda] tag#4 CDB: Read(10) 28 00 01 dc d7 80 00 00 20 00
[  132.335603] blk_update_request: I/O error, dev sda, sector 31250304 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[  132.346395] sd 3:0:0:0: [sda] tag#3 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[  132.356005] sd 3:0:0:0: [sda] tag#3 CDB: Read(10) 28 00 01 dc d7 80 00 00 20 00
[  132.363279] blk_update_request: I/O error, dev sda, sector 31250304 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[  132.373662] Buffer I/O error on dev sda2, logical block 915516, async page read
[  132.395772] sd 3:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s
[  132.405395] sd 3:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 1d d0 02 00 00 02 00
[  132.412665] blk_update_request: I/O error, dev sda, sector 1953794 op 0x0:(READ) flags 0x1000 phys_seg 1 prio class 0
[  132.423227] EXT4-fs (sda2): unable to read superblock
mount: mounting /dev/sda2 on /root failed: Input/output error
Failed to mount /dev/sda2 as root file system.


BusyBox v1.30.1 (Debian 1:1.30.1-6+b3) built-in shell (ash)
Enter 'help' for a list of built-in commands.

(initramfs)
system type		: Generic Loongson64 System
machine			: loongson,loongson64g-4core-ls7a
processor		: 0
cpu model		: ICT Loongson-3 V0.4  FPU V0.1
BogoMIPS		: 3592.19
wait instruction	: yes
microsecond timers	: yes
tlb_entries		: 2112
extra interrupt vector	: no
hardware watchpoint	: no
isa			: mips1 mips2 mips3 mips4 mips5 mips32r1 mips32r2 mips64r1 mips64r2
ASEs implemented	: vz msa loongson-mmi loongson-cam loongson-ext loongson-ext2
shadow register sets	: 1
kscratch registers	: 6
package			: 0
core			: 0
VCED exceptions		: not available
VCEI exceptions		: not available

processor		: 1
cpu model		: ICT Loongson-3 V0.4  FPU V0.1
BogoMIPS		: 3608.57
wait instruction	: yes
microsecond timers	: yes
tlb_entries		: 2112
extra interrupt vector	: no
hardware watchpoint	: no
isa			: mips1 mips2 mips3 mips4 mips5 mips32r1 mips32r2 mips64r1 mips64r2
ASEs implemented	: vz msa loongson-mmi loongson-cam loongson-ext loongson-ext2
shadow register sets	: 1
kscratch registers	: 6
package			: 0
core			: 1
VCED exceptions		: not available
VCEI exceptions		: not available

processor		: 2
cpu model		: ICT Loongson-3 V0.4  FPU V0.1
BogoMIPS		: 3608.57
wait instruction	: yes
microsecond timers	: yes
tlb_entries		: 2112
extra interrupt vector	: no
hardware watchpoint	: no
isa			: mips1 mips2 mips3 mips4 mips5 mips32r1 mips32r2 mips64r1 mips64r2
ASEs implemented	: vz msa loongson-mmi loongson-cam loongson-ext loongson-ext2
shadow register sets	: 1
kscratch registers	: 6
package			: 0
core			: 2
VCED exceptions		: not available
VCEI exceptions		: not available

processor		: 3
cpu model		: ICT Loongson-3 V0.4  FPU V0.1
BogoMIPS		: 3608.57
wait instruction	: yes
microsecond timers	: yes
tlb_entries		: 2112
extra interrupt vector	: no
hardware watchpoint	: no
isa			: mips1 mips2 mips3 mips4 mips5 mips32r1 mips32r2 mips64r1 mips64r2
ASEs implemented	: vz msa loongson-mmi loongson-cam loongson-ext loongson-ext2
shadow register sets	: 1
kscratch registers	: 6
package			: 0
core			: 3
VCED exceptions		: not available
VCEI exceptions		: not available

00:00.0 Host bridge: Loongson Technology LLC Hyper Transport Bridge Controller
00:00.1 Non-VGA unclassified device: Loongson Technology LLC Hyper Transport Bridge Controller
00:04.0 USB controller: Loongson Technology LLC OHCI USB Controller
00:04.1 USB controller: Loongson Technology LLC EHCI USB Controller
00:05.0 USB controller: Loongson Technology LLC OHCI USB Controller
00:05.1 USB controller: Loongson Technology LLC EHCI USB Controller
00:06.0 Multimedia video controller: Loongson Technology LLC Vivante GPU (Graphics Processing Unit)
00:06.1 Display controller: Loongson Technology LLC DC (Display Controller)
00:07.0 Audio device: Loongson Technology LLC HDA (High Definition Audio) Controller
00:08.0 SATA controller: Loongson Technology LLC SATA AHCI Controller
00:08.1 SATA controller: Loongson Technology LLC SATA AHCI Controller
00:08.2 SATA controller: Loongson Technology LLC SATA AHCI Controller
00:09.0 PCI bridge: Loongson Technology LLC PCI-to-PCI Bridge (rev 01)
00:0b.0 PCI bridge: Loongson Technology LLC PCI-to-PCI Bridge (rev 01)
00:0d.0 PCI bridge: Loongson Technology LLC PCI-to-PCI Bridge (rev 01)
00:0e.0 PCI bridge: Loongson Technology LLC PCI-to-PCI Bridge (rev 01)
00:16.0 System peripheral: Loongson Technology LLC SPI Controller
00:17.0 ISA bridge: Loongson Technology LLC LPC Controller
01:00.0 SATA controller: ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 02)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0c)
03:00.0 USB controller: Renesas Technology Corp. uPD720201 USB 3.0 Host Controller (rev 03)
04:00.0 USB controller: ASMedia Technology Inc. ASM1042A USB 3.0 Host Controller

--- End Message ---
--- Begin Message ---
Source: linux
Source-Version: 5.10.205-1
Done: Salvatore Bonaccorso <carnil@debian.org>

We believe that the bug you reported is fixed in the latest version of
linux, which is due to be installed in the Debian FTP archive.

A summary of the changes between this version and the previous one is
attached.

Thank you for reporting the bug, which will now be closed.  If you
have further comments please address them to 1035587@bugs.debian.org,
and the maintainer will reopen the bug report if appropriate.

Debian distribution maintenance software
pp.
Salvatore Bonaccorso <carnil@debian.org> (supplier of updated linux package)

(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing ftpmaster@ftp-master.debian.org)


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512

Format: 1.8
Date: Sat, 30 Dec 2023 10:41:34 +0100
Source: linux
Architecture: source
Version: 5.10.205-1
Distribution: bullseye-security
Urgency: high
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Changed-By: Salvatore Bonaccorso <carnil@debian.org>
Closes: 1032104 1035587 1052304
Changes:
 linux (5.10.205-1) bullseye-security; urgency=high
 .
   * New upstream stable update:
     https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.10.198
     - NFS: Use the correct commit info in nfs_join_page_group()
     - NFS/pNFS: Report EINVAL errors from connect() to the server
     - SUNRPC: Mark the cred for revalidation if the server rejects it
     - tracing: Increase trace array ref count on enable and filter files
     - ata: ahci: Drop pointless VPRINTK() calls and convert the remaining ones
     - ata: libahci: clear pending interrupt status
     - ext4: remove the 'group' parameter of ext4_trim_extent
     - ext4: add new helper interface ext4_try_to_trim_range()
     - ext4: scope ret locally in ext4_try_to_trim_range()
     - ext4: change s_last_trim_minblks type to unsigned long
     - ext4: mark group as trimmed only if it was fully scanned
     - ext4: replace the traditional ternary conditional operator with with
       max()/min()
     - ext4: move setting of trimmed bit into ext4_try_to_trim_range()
     - ext4: do not let fstrim block system suspend
     - tracing: Have event inject files inc the trace array ref count
     - bpf: Avoid deadlock when using queue and stack maps from NMI
     - i40e: Fix VF VLAN offloading when port VLAN is configured
     - [powerpc*] perf/hv-24x7: Update domain value check
     - dccp: fix dccp_v4_err()/dccp_v6_err() again
     - [x86] platform/x86: intel_scu_ipc: Check status after timeout in
       busy_loop()
     - [x86] platform/x86: intel_scu_ipc: Check status upon timeout in
       ipc_wait_for_interrupt()
     - [x86] platform/x86: intel_scu_ipc: Don't override scu in
       intel_scu_ipc_dev_simple_command()
     - [x86] platform/x86: intel_scu_ipc: Fail IPC send if still busy
     - [x86] srso: Fix srso_show_state() side effect
     - [x86] srso: Fix SBPB enablement for spec_rstack_overflow=off
     - [arm64] net: hns3: only enable unicast promisc when mac table full
     - [arm64] net: hns3: add 5ms delay before clear firmware reset irq source
     - net: bridge: use DEV_STATS_INC()
     - team: fix null-ptr-deref when team device type is changed
     - seqlock: avoid -Wshadow warnings
     - seqlock: Rename __seqprop() users
     - seqlock: Prefix internal seqcount_t-only macros with a "do_"
     - locking/seqlock: Do the lockdep annotation before locking in
       do_write_seqcount_begin_nested()
     - bnxt_en: Flush XDP for bnxt_poll_nitroa0()'s NAPI
     - net: rds: Fix possible NULL-pointer dereference
     - gpio: tb10x: Fix an error handling path in tb10x_gpio_probe()
     - i2c: mux: demux-pinctrl: check the return value of devm_kstrdup()
     - Input: i8042 - rename i8042-x86ia64io.h to i8042-acpipnpio.h
     - Input: i8042 - add quirk for TUXEDO Gemini 17 Gen1/Clevo PD70PN
     - [arm64] media: venus: core: Add io base variables for each block
     - [arm64] media: venus: hfi,pm,firmware: Convert to block relative
       addressing
     - [arm64] media: venus: hfi: Define additional 6xx registers
     - [arm64] media: venus: core: Add differentiator IS_V6(core)
     - [arm64] media: venus: hfi: Add a 6xx boot logic
     - [arm64] media: venus: hfi_venus: Write to VIDC_CTRL_INIT after unmasking
       interrupts
     - netfilter: use actual socket sk for REJECT action
     - netfilter: nft_exthdr: Support SCTP chunks
     - netfilter: nf_tables: add and use nft_sk helper
     - netfilter: nf_tables: add and use nft_thoff helper
     - netfilter: nft_exthdr: break evaluation if setting TCP option fails
     - netfilter: exthdr: add support for tcp option removal
     - netfilter: nft_exthdr: Fix non-linear header modification
     - ata: libata: Rename link flag ATA_LFLAG_NO_DB_DELAY
     - ata: ahci: Add support for AMD A85 FCH (Hudson D4)
     - ata: ahci: Rename board_ahci_mobile
     - ata: ahci: Add Elkhart Lake AHCI controller
     - btrfs: reset destination buffer when read_extent_buffer() gets invalid
       range
     - [armhf] bus: ti-sysc: Use fsleep() instead of usleep_range() in
       sysc_reset()
     - [armhf] bus: ti-sysc: Fix missing AM35xx SoC matching
     - [armhf] ARM: dts: omap: correct indentation
     - [armhf] bus: ti-sysc: Fix SYSC_QUIRK_SWSUP_SIDLE_ACT handling for uart
       wake-up
     - gpio: pmic-eic-sprd: Add can_sleep flag for PMIC EIC chip
     - i2c: npcm7xx: Fix callback completion ordering
     - scsi: qedf: Add synchronization between I/O completions and abort
     - ring-buffer: Avoid softlockup in ring_buffer_resize()
     - ring-buffer: Do not attempt to read past "commit"
     - scsi: pm80xx: Use phy-specific SAS address when sending PHY_START command
     - scsi: pm80xx: Avoid leaking tags when processing
       OPC_INB_SET_CONTROLLER_CONFIG command
     - ata: libata-eh: do not clear ATA_PFLAG_EH_PENDING in ata_eh_reset()
     - bpf: Clarify error expectations from bpf_clone_redirect
     - media: vb2: frame_vector.c: replace WARN_ONCE with a comment
     - [powerpc*] watchpoints: Disable preemption in thread_change_pc()
     - [armhf] ncsi: Propagate carrier gain/loss events to the NCSI controller
     - sched/cpuacct: Fix user/system in shown cpuacct.usage*
     - sched/cpuacct: Fix charge percpu cpuusage
     - sched/cpuacct: Optimize away RCU read lock
     - cgroup: Fix suspicious rcu_dereference_check() usage warning
     - ACPI: Check StorageD3Enable _DSD property in ACPI code
     - nvme-pci: factor the iod mempool creation into a helper
     - nvme-pci: factor out a nvme_pci_alloc_dev helper
     - nvme-pci: do not set the NUMA node of device if it has none
     - watchdog: iTCO_wdt: No need to stop the timer in probe
     - watchdog: iTCO_wdt: Set NO_REBOOT if the watchdog is not already running
     - netfilter: nft_exthdr: Search chunks in SCTP packets only
     - netfilter: nft_exthdr: Fix for unsafe packet data read
     - nvme-pci: always return an ERR_PTR from nvme_pci_alloc_dev
     - Revert "tty: n_gsm: fix UAF in gsm_cleanup_mux"
     - serial: 8250_port: Check IRQ data before use
     - nilfs2: fix potential use after free in nilfs_gccache_submit_read_data()
     - netfilter: nf_tables: disallow rule removal from chain binding
       (CVE-2023-5197)
     - ALSA: hda: Disable power save for solving pop issue on Lenovo ThinkCentre
       M70q
     - ata: libata-scsi: ignore reserved bits for REPORT SUPPORTED OPERATION
       CODES
     - i2c: i801: unregister tco_pdev in i801_probe() error path
     - Revert "SUNRPC dont update timeout value on connection reset"
     - proc: nommu: /proc/<pid>/maps: release mmap read lock
     - ring-buffer: Update "shortest_full" in polling
     - btrfs: properly report 0 avail for very full file systems
     - bpf: Fix BTF_ID symbol generation collision
     - bpf: Fix BTF_ID symbol generation collision in tools/
     - net: thunderbolt: Fix TCPv6 GSO checksum calculation
     - ata: libata-core: Fix ata_port_request_pm() locking
     - ata: libata-core: Fix port and device removal
     - ata: libata-core: Do not register PM operations for SAS ports
     - ata: libata-sata: increase PMP SRST timeout to 10s
     - fs: binfmt_elf_efpic: fix personality for ELF-FDPIC
     - NFS: Cleanup unused rpc_clnt variable
     - NFS: rename nfs_client_kset to nfs_kset
     - NFSv4: Fix a state manager thread deadlock regression
     - ring-buffer: remove obsolete comment for free_buffer_page()
     - ring-buffer: Fix bytes info in per_cpu buffer stats
     - rbd: move rbd_dev_refresh() definition
     - rbd: decouple header read-in from updating rbd_dev->header
     - rbd: decouple parent info read-in from updating rbd_dev
     - rbd: take header_rwsem in rbd_dev_refresh() only when updating
     - block: fix use-after-free of q->q_usage_counter
     - Revert "clk: imx: pll14xx: dynamically configure PLL for
       393216000/361267200Hz"
     - Revert "PCI: qcom: Disable write access to read only registers for IP
       v2.3.3"
     - scsi: zfcp: Fix a double put in zfcp_port_enqueue()
     - wifi: mwifiex: Fix tlv_buf_left calculation
     - net: replace calls to sock->ops->connect() with kernel_connect()
     - net: prevent rewrite of msg_name in sock_sendmsg()
     - [arm64] Add Cortex-A520 CPU part definition
     - ubi: Refuse attaching if mtd's erasesize is 0
     - wifi: iwlwifi: dbg_ini: fix structure packing
     - wifi: mwifiex: Fix oob check condition in mwifiex_process_rx_packet
     - bpf: Fix tr dereferencing
     - drivers/net: process the result of hdlc_open() and add call of
       hdlc_close() in uhdlc_close()
     - wifi: mt76: mt76x02: fix MT76x0 external LNA gain handling
     - regmap: rbtree: Fix wrong register marked as in-cache when creating new
       node
     - ima: Finish deprecation of IMA_TRUSTED_KEYRING Kconfig
     - scsi: target: core: Fix deadlock due to recursive locking
     - ima: rework CONFIG_IMA dependency block
     - NFSv4: Fix a nfs4_state_manager() race
     - modpost: add missing else to the "of" check
     - net: fix possible store tearing in neigh_periodic_work()
     - ipv4, ipv6: Fix handling of transhdrlen in __ip{,6}_append_data()
     - [arm64,armhf] net: dsa: mv88e6xxx: Avoid EEPROM timeout when EEPROM is
       absent
     - net: usb: smsc75xx: Fix uninit-value access in __smsc75xx_read_reg
     - net: nfc: llcp: Add lock when modifying device list
     - net: ethernet: ti: am65-cpsw: Fix error code in
       am65_cpsw_nuss_init_tx_chns()
     - netfilter: handle the connecting collision properly in
       nf_conntrack_proto_sctp
     - netfilter: nf_tables: nft_set_rbtree: fix spurious insertion failure
     - [armhf] net: stmmac: dwmac-stm32: fix resume on STM32 MCU
     - tipc: fix a potential deadlock on &tx->lock
     - tcp: fix quick-ack counting to count actual ACKs of new data
     - tcp: fix delayed ACKs for MSS boundary condition
     - sctp: update transport state when processing a dupcook packet
     - sctp: update hb timer immediately after users change hb_interval
     - cpupower: add Makefile dependencies for install targets
     - dm zoned: free dmz->ddev array in dmz_put_zoned_devices
     - RDMA/core: Require admin capabilities to set system parameters
     - of: dynamic: Fix potential memory leak in of_changeset_action()
     - IB/mlx4: Fix the size of a buffer in add_port_entries()
     - [armhf] gpio: aspeed: fix the GPIO number passed to
       pinctrl_gpio_set_config()
     - RDMA/cma: Initialize ib_sa_multicast structure to 0 when join
     - RDMA/cma: Fix truncation compilation warning in make_cma_ports
     - RDMA/uverbs: Fix typo of sizeof argument
     - RDMA/siw: Fix connection failure handling
     - RDMA/mlx5: Fix NULL string error
     - netfilter: nf_tables: fix kdoc warnings after gc rework
     - netfilter: nftables: exthdr: fix 4-byte stack OOB write
     - xen/events: replace evtchn_rwlock with RCU (CVE-2023-34324)
     https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.10.199
     - RDMA/srp: Make struct scsi_cmnd and struct srp_request adjacent
     - RDMA/srp: Do not call scsi_done() from srp_abort()
     - RDMA/cxgb4: Check skb value for failure to allocate
     - [arm64] perf/arm-cmn: Fix the unhandled overflow status of counter 4 to 7
     - HID: logitech-hidpp: Fix kernel crash on receiver USB disconnect
     - quota: Fix slow quotaoff
     - net: prevent address rewrite in kernel_bind()
     - [arm64] drm/msm/dp: do not reinitialize phy unless retry during link
       training
     - [arm64] drm/msm/dsi: skip the wait for video mode done if not applicable
     - [arm64] drm/msm/dpu: change _dpu_plane_calc_bw() to use u64 to avoid
       overflow
     - xen-netback: use default TX queue size for vifs
     - [x86] drm/vmwgfx: fix typo of sizeof argument
     - net: macsec: indicate next pn update when offloading
     - net: phy: mscc: macsec: reject PN update requests
     - ixgbe: fix crash with empty VF macvlan list
     - net: nfc: fix races in nfc_llcp_sock_get() and nfc_llcp_sock_get_sn()
     - nfc: nci: assert requested protocol is valid
     - workqueue: Override implicit ordered attribute in
       workqueue_apply_unbound_cpumask()
     - net: add sysctl accept_ra_min_rtr_lft
     - net: change accept_ra_min_rtr_lft to affect all RA lifetimes
     - net: release reference to inet6_dev pointer
     - [armhf] dmaengine: stm32-mdma: abort resume if no ongoing transfer
     - usb: xhci: xhci-ring: Use sysdev for mapping bounce buffer
     - net: usb: dm9601: fix uninitialized variable use in dm9601_mdio_read
     - [arm64,armhf] usb: dwc3: Soft reset phy on probe for host
     - usb: musb: Get the musb_qh poniter after musb_giveback
     - usb: musb: Modify the "HWVers" register address
     - iio: pressure: bmp280: Fix NULL pointer exception
     - iio: pressure: dps310: Adjust Timeout Settings
     - iio: pressure: ms5611: ms5611_prom_is_valid false negative bug
     - [x86] cpu: Fix AMD erratum #1485 on Zen4-based CPUs
     - mcb: remove is_added flag from mcb_device struct
     - [x86] thunderbolt: Check that lane 1 is in CL0 before enabling lane
       bonding
     - libceph: use kernel_connect()
     - ceph: fix incorrect revoked caps assert in ceph_fill_file_size()
     - ceph: fix type promotion bug on 32bit systems
     - Input: powermate - fix use-after-free in powermate_config_complete
     - Input: psmouse - fix fast_reconnect function for PS/2 mode
     - Input: xpad - add PXN V900 support
     - Input: i8042 - add Fujitsu Lifebook E5411 to i8042 quirk table
     - Input: goodix - ensure int GPIO is in input for gpio_count == 1 &&
       gpio_int_idx == 0 case
     - tee: amdtee: fix use-after-free vulnerability in amdtee_close_session
     - cgroup: Remove duplicates in cgroup v1 tasks file
     - pinctrl: avoid unsafe code pattern in find_pinctrl()
     - counter: microchip-tcb-capture: Fix the use of internal GCLK logic
     - usb: gadget: udc-xilinx: replace memcpy with memcpy_toio
     - usb: gadget: ncm: Handle decoding of multiple NTB's in unwrap call
     - [powerpc*] 8xx: Fix pte_access_permitted() for PAGE_NONE
     - [powerpc*] 64e: Fix wrong test in __ptep_test_and_clear_young()
     - [x86] alternatives: Disable KASAN in apply_alternatives()
     - [arm64] report EL1 UNDEFs better
     - [arm64] die(): pass 'err' as long
     - [arm64] consistently pass ESR_ELx to die()
     - [arm64] rework FPAC exception handling
     - [arm64] rework BTI exception handling
     - [arm64] allow kprobes on EL0 handlers
     - [arm64] split EL0/EL1 UNDEF handlers
     - [arm64] factor out EL1 SSBS emulation hook
     - [arm64] factor insn read out of call_undef_hook()
     - [arm64] rework EL0 MRS emulation
     - [arm64] armv8_deprecated: fold ops into insn_emulation
     - [arm64] armv8_deprecated move emulation functions
     - [arm64] armv8_deprecated: move aarch32 helper earlier
     - [arm64] armv8_deprecated: rework deprected instruction handling
     - [arm64] armv8_deprecated: fix unused-function error
     - RDMA/srp: Set scmnd->result only when scmnd is not NULL
     - RDMA/srp: Fix srp_abort()
     - ravb: Fix use-after-free issue in ravb_tx_timeout_work() (CVE-2023-35827)
     - dev_forward_skb: do not scrub skb mark within the same name space
     - lib/Kconfig.debug: do not enable DEBUG_PREEMPT by default
     - mm/memory_hotplug: rate limit page migration warnings
     - Documentation: sysctl: align cells in second content column
     - usb: hub: Guard against accesses to uninitialized BOS descriptors
     - Bluetooth: hci_event: Ignore NULL link key
     - Bluetooth: Reject connection with the device which has same BD_ADDR
     - Bluetooth: Fix a refcnt underflow problem for hci_conn
     - Bluetooth: vhci: Fix race when opening vhci device
     - Bluetooth: hci_event: Fix coding style
     - Bluetooth: avoid memcmp() out of bounds warning
     - ice: fix over-shifted variable
     - ice: reset first in crash dump kernels
     - nfc: nci: fix possible NULL pointer dereference in send_acknowledge()
     - regmap: fix NULL deref on lookup
     - [x86] KVM: x86: Mask LVTPC when handling a PMI
     - [x86] sev: Disable MMIO emulation from user mode (CVE-2023-46813)
     - [x86] sev: Check IOBM for IOIO exceptions from user-space (CVE-2023-46813)
     - [x86] sev: Check for user-space IOIO pointing to kernel space
       (CVE-2023-46813)
     - tcp: check mptcp-level constraints for backlog coalescing
     - netfilter: nft_payload: fix wrong mac header matching
     - nvmet-tcp: Fix a possible UAF in queue intialization setup (CVE-2023-5178)
     - [x86] drm/i915: Retry gtt fault when out of fence registers
     - qed: fix LL2 RX buffer allocation
     - xfrm: fix a data-race in xfrm_gen_index()
     - xfrm: interface: use DEV_STATS_INC()
     - net: ipv4: fix return value check in esp_remove_trailer
     - net: ipv6: fix return value check in esp_remove_trailer
     - net: rfkill: gpio: prevent value glitch during probe
     - tcp: fix excessive TLP and RACK timeouts from HZ rounding
     - tcp: tsq: relax tcp_small_queue_check() when rtx queue contains a single
       skb
     - tun: prevent negative ifindex
     - ipv4: fib: annotate races around nh->nh_saddr_genid and nh->nh_saddr
     - net: usb: smsc95xx: Fix an error code in smsc95xx_reset()
     - i40e: prevent crash on probe if hw registers have invalid values
     - net: dsa: bcm_sf2: Fix possible memory leak in bcm_sf2_mdio_register()
     - net/sched: sch_hfsc: upgrade 'rt' to 'sc' when it becomes a inner curve
     - netfilter: nft_set_rbtree: .deactivate fails if element has expired
     - net: pktgen: Fix interface flags printing
     - [x86] thunderbolt: Workaround an IOMMU fault on certain systems with Intel
       Maple Ridge
     - resource: Add irqresource_disabled()
     - ACPI: Drop acpi_dev_irqresource_disabled()
     - ACPI: resources: Add DMI-based legacy IRQ override quirk
     - ACPI: resource: Skip IRQ override on Asus Vivobook K3402ZA/K3502ZA
     - ACPI: resource: Add ASUS model S5402ZA to quirks
     - ACPI: resource: Skip IRQ override on Asus Vivobook S5602ZA
     - ACPI: resource: Add Asus ExpertBook B2502 to Asus quirks
     - ACPI: resource: Skip IRQ override on Asus Expertbook B2402CBA
     - ACPI: resource: Skip IRQ override on ASUS ExpertBook B1502CBA
     - ACPI: resource: Skip IRQ override on ASUS ExpertBook B1402CBA
     - usb: core: Track SuperSpeed Plus GenXxY
     - xhci: cleanup xhci_hub_control port references
     - xhci: move port specific items such as state completions to port structure
     - xhci: rename resume_done to resume_timestamp
     - xhci: clear usb2 resume related variables in one place.
     - xhci: decouple usb2 port resume and get_port_status request handling
     - xhci: track port suspend state correctly in unsuccessful resume cases
     - serial: 8250: omap: Fix imprecise external abort for omap_8250_pm()
     - serial: 8250_omap: Fix errors with no_console_suspend
     - drm/amd/display: only check available pipe to disable vbios mode.
     - drm/amd/display: Don't set dpms_off for seamless boot
     - drm/connector: Give connector sysfs devices there own device_type
     - drm/connector: Add a fwnode pointer to drm_connector and register with
       ACPI (v2)
     - drm/connector: Add drm_connector_find_by_fwnode() function (v3)
     - drm/connector: Add support for out-of-band hotplug notification (v3)
     - usb: typec: altmodes/displayport: Notify drm subsys of hotplug events
     - usb: typec: altmodes/displayport: Signal hpd low when exiting mode
     - ARM: dts: ti: omap: Fix noisy serial with overrun-throttle-ms for mapphone
     - btrfs: return -EUCLEAN for delayed tree ref with a ref count not equals to
       1
     - btrfs: initialize start_slot in btrfs_log_prealloc_extents
     - i2c: mux: Avoid potential false error message in i2c_mux_add_adapter
     - overlayfs: set ctime when setting mtime and atime
     - gpio: timberdale: Fix potential deadlock on &tgpio->lock
     - ata: libata-eh: Fix compilation warning in ata_eh_link_report()
     - tracing: relax trace_event_eval_update() execution with cond_resched()
     - HID: holtek: fix slab-out-of-bounds Write in holtek_kbd_input_event
     - Bluetooth: Avoid redundant authentication
     - Bluetooth: hci_core: Fix build warnings
     - wifi: cfg80211: Fix 6GHz scan configuration
     - wifi: mac80211: allow transmitting EAPOL frames with tainted key
     - wifi: cfg80211: avoid leaking stack data into trace
     - regulator/core: Revert "fix kobject release warning and memory leak in
       regulator_register()"
     - sky2: Make sure there is at least one frag_addr available
     - ipv4/fib: send notify when delete source address routes
     - drm: panel-orientation-quirks: Add quirk for One Mix 2S
     - btrfs: fix some -Wmaybe-uninitialized warnings in ioctl.c
     - HID: multitouch: Add required quirk for Synaptics 0xcd7e device
     - [x86] platform/x86: touchscreen_dmi: Add info for the Positivo C4128B
     - net/mlx5: Handle fw tracer change ownership event based on MTRC
     - Bluetooth: hci_event: Fix using memcmp when comparing keys
     - mtd: physmap-core: Restore map_rom fallback
     - mmc: core: sdio: hold retuning if sdio in 1-bit mode
     - mmc: core: Capture correct oemid-bits for eMMC cards
     - Revert "pinctrl: avoid unsafe code pattern in find_pinctrl()"
     - pNFS: Fix a hang in nfs4_evict_inode()
     - ACPI: irq: Fix incorrect return value in acpi_register_gsi()
     - nvme-pci: add BOGUS_NID for Intel 0a54 device
     - nvme-rdma: do not try to stop unallocated queues
     - USB: serial: option: add Telit LE910C4-WWX 0x1035 composition
     - USB: serial: option: add entry for Sierra EM9191 with new firmware
     - USB: serial: option: add Fibocom to DELL custom modem FM101R-GL
     - perf: Disallow mis-matched inherited group reads (CVE-2023-5717)
     - [s390x] pci: fix iommu bitmap allocation
     - [x86] platform/x86: asus-wmi: Change ASUS_WMI_BRN_DOWN code from 0x20 to
       0x2e
     - [x86] platform/x86: asus-wmi: Map 0x2a code, Ignore 0x2b and 0x2c events
     - Bluetooth: hci_sock: fix slab oob read in create_monitor_event
     - Bluetooth: hci_sock: Correctly bounds check and pad HCI_MON_NEW_INDEX name
     - xfrm6: fix inet6_dev refcount underflow problem
     https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.10.200
     - virtio_balloon: Fix endless deflation and inflation on arm64
     - virtio-mmio: fix memory leak of vm_dev
     - mm/page_alloc: correct start page when guard page debug is enabled
     - drm/dp_mst: Fix NULL deref in get_mst_branch_device_by_guid_helper()
     - r8169: fix the KCSAN reported data-race in rtl_tx while reading
       TxDescArray[entry].opts1
     - r8169: fix the KCSAN reported data race in rtl_rx while reading
       desc->opts1
     - treewide: Spelling fix in comment
     - igb: Fix potential memory leak in igb_add_ethtool_nfc_entry
     - neighbour: fix various data-races
     - igc: Fix ambiguity in the ethtool advertising
     - net: ieee802154: adf7242: Fix some potential buffer overflow in
       adf7242_stats_show()
     - net: usb: smsc95xx: Fix uninit-value access in smsc95xx_read_reg
     - r8152: Increase USB control msg timeout to 5000ms as per spec
     - r8152: Run the unload routine if we have errors during probe
     - r8152: Cancel hw_phy_work if we have an error in probe
     - r8152: Release firmware if we have an error in probe
     - tcp: fix wrong RTO timeout when received SACK reneging
     - gtp: uapi: fix GTPA_MAX
     - gtp: fix fragmentation needed check with gso
     - i40e: Fix wrong check for I40E_TXR_FLAGS_WB_ON_ITR
     - [armhf] i2c: muxes: i2c-mux-pinctrl: Use of_get_i2c_adapter_by_node()
     - [armhf] i2c: stm32f7: Fix PEC handling in case of SMBUS transfers
     - [armhf] i2c: aspeed: Fix i2c bus hang in slave read
     - tracing/kprobes: Fix the description of variable length arguments
     - [arm64,armhf] nvmem: imx: correct nregs for i.MX6ULL
     - [arm64,armhf] nvmem: imx: correct nregs for i.MX6SLL
     - [arm64,armhf] nvmem: imx: correct nregs for i.MX6UL
     - perf/core: Fix potential NULL deref
     - clk: Sanitize possible_parent_show to Handle Return Value of
       of_clk_get_parent_name
     - [x86] i8259: Skip probing when ACPI/MADT advertises PCAT compatibility
     - kobject: Fix slab-out-of-bounds in fill_kobj_path() (CVE-2023-45863)
     - f2fs: fix to do sanity check on inode type during garbage collection
       (CVE-2021-44879)
     - [x86] mm: Simplify RESERVE_BRK()
     - [x86] mm: Fix RESERVE_BRK() for older binutils
     - ext4: add two helper functions extent_logical_end() and pa_logical_end()
     - ext4: fix BUG in ext4_mb_new_inode_pa() due to overflow
     - ext4: avoid overlapping preallocations due to overflow
     - [x86] objtool/x86: add missing embedded_insn check
     - driver: platform: Add helper for safer setting of driver_override
     - [arm64] rpmsg: Constify local variable in field store macro
     - rpmsg: Fix kfree() of static memory on setting driver_override
     - rpmsg: Fix calling device_lock() on non-initialized device
     - [arm64] rpmsg: glink: Release driver_override
     - [arm64] rpmsg: Fix possible refcount leak in
       rpmsg_register_device_override()
     - [x86] Fix .brk attribute in linker script
     - net: sched: cls_u32: Fix allocation size in u32_init()
     - [armhf] irqchip/stm32-exti: add missing DT IRQ flag translation
     - Input: synaptics-rmi4 - handle reset delay when using SMBus trsnsport
     - fbdev: atyfb: only use ioremap_uc() on i386 and ia64
     - netfilter: nfnetlink_log: silence bogus compiler warning
     - ASoC: rt5650: fix the wrong result of key button
     - [x86] fbdev: uvesafb: Call cn_del_callback() at the end of uvesafb_exit()
     - scsi: mpt3sas: Fix in error path
     - net: chelsio: cxgb4: add an error code check in t4_load_phy_fw
     - [powerpc*] mm: Fix boot crash with FLATMEM
     - can: isotp: change error format from decimal to symbolic error names
     - can: isotp: add symbolic error message to isotp_module_init()
     - can: isotp: Add error message if txqueuelen is too small
     - can: isotp: set max PDU size to 64 kByte
     - can: isotp: isotp_bind(): return -EINVAL on incorrect CAN ID formatting
     - can: isotp: check CAN address family in isotp_bind()
     - can: isotp: handle wait_event_interruptible() return values
     - can: isotp: add local echo tx processing and tx without FC
     - can: isotp: isotp_bind(): do not validate unused address information
     - can: isotp: isotp_sendmsg(): fix TX state detection and wait behavior
     - PCI: Prevent xHCI driver from claiming AMD VanGogh USB3 DRD device
     - usb: storage: set 1.50 as the lower bcdDevice for older "Super Top"
       compatibility
     - usb: raw-gadget: properly handle interrupted requests
     - tty: 8250: Remove UC-257 and UC-431
     - tty: 8250: Add support for additional Brainboxes UC cards
     - tty: 8250: Add support for Brainboxes UP cards
     - tty: 8250: Add support for Intashield IS-100
     - ALSA: hda: intel-dsp-config: Fix JSL Chromebook quirk detection
     https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.10.201
     - [x86] iov_iter, x86: Be consistent about the __user tag on
       copy_mc_to_user()
     - sched/uclamp: Ignore (util == 0) optimization in feec() when p_util_max =
       0
     - vfs: fix readahead(2) on block devices
     - [x86] srso: Fix SBPB enablement for (possible) future fixed HW
     - futex: Don't include process MM in futex key on no-MMU
     - [x86] boot: Fix incorrect startup_gdt_descr.size
     - pstore/platform: Add check for kstrdup
     - genirq/matrix: Exclude managed interrupts in irq_matrix_allocated()
     - i40e: fix potential memory leaks in i40e_remove()
     - udp: add missing WRITE_ONCE() around up->encap_rcv
     - tcp: call tcp_try_undo_recovery when an RTOd TFO SYNACK is ACKed
     - overflow: Implement size_t saturating arithmetic helpers
     - gve: Use size_add() in call to struct_size()
     - tipc: Use size_add() in calls to struct_size()
     - wifi: rtw88: debug: Fix the NULL vs IS_ERR() bug for debugfs_create_file()
     - tcp_metrics: add missing barriers on delete
     - tcp_metrics: properly set tp->snd_ssthresh in tcp_init_metrics()
     - tcp_metrics: do not create an entry from tcp_init_metrics()
     - wifi: rtlwifi: fix EDCA limit set by BT coexistence
     - can: dev: can_restart(): don't crash kernel if carrier is OK
     - can: dev: can_restart(): fix race condition between controller restart and
       netif_carrier_on()
     - PM / devfreq: rockchip-dfi: Make pmu regmap mandatory
     - thermal: core: prevent potential string overflow
     - r8169: use tp_to_dev instead of open code
     - r8169: fix rare issue with broken rx after link-down on RTL8125
     - tcp: fix cookie_init_timestamp() overflows
     - ACPI: sysfs: Fix create_pnp_modalias() and create_of_modalias()
     - ipv6: avoid atomic fragment on GSO packets
     - net: add DEV_STATS_READ() helper
     - ipvlan: properly track tx_errors
     - regmap: debugfs: Fix a erroneous check after snprintf()
     - [arm64] clk: qcom: clk-rcg2: Fix clock rate overflow for high parent
       frequencies
     - [arm64] clk: qcom: mmcc-msm8998: Add hardware clockgating registers to
       some clks
     - [arm64] clk: qcom: mmcc-msm8998: Don't check halt bit on some branch clks
     - [arm64] clk: qcom: mmcc-msm8998: Set bimc_smmu_gdsc always on
     - [arm64] clk: qcom: mmcc-msm8998: Fix the SMMU GDSC
     - [arm64] clk: qcom: gcc-sm8150: use ARRAY_SIZE instead of specifying
       num_parents
     - [arm64] clk: qcom: gcc-sm8150: Fix gcc_sdcc2_apps_clk_src
     - [arm64] clk: imx: imx8mq: correct error handling path
     - clk: asm9260: use parent index to link the reference clock
     - clk: linux/clk-provider.h: fix kernel-doc warnings and typos
     - [arm64] spi: nxp-fspi: use the correct ioremap function
     - [armhf] clk: ti: Add ti_dt_clk_name() helper to use clock-output-names
     - [armhf] clk: ti: Update pll and clockdomain clocks to use ti_dt_clk_name()
     - [armhf] clk: ti: Update component clocks to use ti_dt_clk_name()
     - [armhf] clk: ti: change ti_clk_register[_omap_hw]() API
     - [armhf] clk: ti: fix double free in of_ti_divider_clk_setup()
     - [x86] platform/x86: wmi: Fix probe failure when failing to register WMI
       devices
     - [x86] platform/x86: wmi: remove unnecessary initializations
     - [x86] platform/x86: wmi: Fix opening of char device
     - hwmon: (coretemp) Fix potentially truncated sysfs attribute name
     - [arm64,armhf] drm/rockchip: vop: Fix reset of state in duplicate state
       crtc funcs
     - [arm64,armhf] drm/rockchip: vop: Fix call to crtc reset helper
     - drm/radeon: possible buffer overflow
     - [arm64] drm/rockchip: cdn-dp: Fix some error handling paths in
       cdn_dp_probe()
     - [arm64,armhf] drm/rockchip: Fix type promotion bug in
       rockchip_gem_iommu_map()
     - xen-pciback: Consider INTx disabled when MSI/MSI-X is enabled
     - [arm64] dts: qcom: msm8916: Fix iommu local address range
     - [arm64] dts: qcom: sdm845-mtp: fix WiFi configuration
     - [i386] hwrng: geode - fix accessing registers
     - libnvdimm/of_pmem: Use devm_kstrdup instead of kstrdup and check its
       return value
     - nd_btt: Make BTT lanes preemptible
     - [arm64] crypto: caam/qi2 - fix Chacha20 + Poly1305 self test failure
     - [arm64] crypto: caam/jr - fix Chacha20 + Poly1305 self test failure
     - [x86] crypto: qat - mask device capabilities with soft straps
     - [x86] crypto: qat - increase size of buffers
     - hid: cp2112: Fix duplicate workqueue initialization
     - [armel,armhf] 9321/1: memset: cast the constant byte to unsigned char
     - ext4: move 'ix' sanity check to corrent position
     - IB/mlx5: Fix rdma counter binding for RAW QP
     - [arm64] RDMA/hns: Fix uninitialized ucmd in hns_roce_create_qp_common()
     - [arm64] RDMA/hns: Fix signed-unsigned mixed comparisons
     - scsi: ufs: core: Leave space for '\0' in utf8 desc string
     - [amd64] RDMA/hfi1: Workaround truncation compilation error
     - hid: cp2112: Fix IRQ shutdown stopping polling for all IRQs on chip
     - Revert "HID: logitech-hidpp: add a module parameter to keep firmware
       gestures"
     - HID: logitech-hidpp: Remove HIDPP_QUIRK_NO_HIDINPUT quirk
     - HID: logitech-hidpp: Don't restart IO, instead defer hid_connect() only
     - HID: logitech-hidpp: Revert "Don't restart communication if not necessary"
     - HID: logitech-hidpp: Move get_wireless_feature_index() check to
       hidpp_connect_event()
     - [x86] ASoC: Intel: Skylake: Fix mem leak when parsing UUIDs fails
     - padata: Convert from atomic_t to refcount_t on parallel_data->refcnt
     - padata: Fix refcnt handling in padata_free_shell()
     - mfd: core: Un-constify mfd_cell.of_reg
     - mfd: core: Ensure disabled devices are skipped without aborting
     - mfd: dln2: Fix double put in dln2_probe
     - leds: pwm: Don't disable the PWM when the LED should be off
     - leds: trigger: ledtrig-cpu:: Fix 'output may be truncated' issue for 'cpu'
     - tty: tty_jobctrl: fix pid memleak in disassociate_ctty()
     - usb: dwc2: fix possible NULL pointer dereference caused by driver
       concurrency
     - dmaengine: ti: edma: handle irq_of_parse_and_map() errors
     - misc: st_core: Do not call kfree_skb() under spin_lock_irqsave()
     - USB: usbip: fix stub_dev hub disconnect
     - dmaengine: pxa_dma: Remove an erroneous BUG_ON() in pxad_free_desc()
     - f2fs: fix to initialize map.m_pblk in f2fs_precache_extents()
     - modpost: fix tee MODULE_DEVICE_TABLE built on big-endian host
     - [powerpc*] 40x: Remove stale PTE_ATOMIC_UPDATES macro
     - [powerpc*] xive: Fix endian conversion size
     - [powerpc*] imc-pmu: Use the correct spinlock initializer.
     - [powerpc*] pseries: fix potential memory leak in init_cpu_associativity()
     - xhci: Loosen RPM as default policy to cover for AMD xHC 1.1
     - usb: host: xhci-plat: fix possible kernel oops while resuming
     - perf machine: Avoid out of bounds LBR memory read
     - perf hist: Add missing puts to hist__account_cycles
     - i3c: Fix potential refcount leak in i3c_master_register_new_i3c_devs
     - rtc: pcf85363: fix wrong mask/val parameters in regmap_update_bits call
     - pcmcia: cs: fix possible hung task and memory leak pccardd()
     - pcmcia: ds: fix refcount leak in pcmcia_device_add()
     - pcmcia: ds: fix possible name leak in error path in pcmcia_device_add()
     - media: i2c: max9286: Fix some redundant of_node_put() calls
     - media: bttv: fix use after free error due to btv->timeout timer
     - media: s3c-camif: Avoid inappropriate kfree()
     - media: vidtv: psi: Add check for kstrdup
     - media: vidtv: mux: Add check and kfree for kstrdup
     - media: cedrus: Fix clock/reset sequence
     - media: dvb-usb-v2: af9035: fix missing unlock
     - regmap: prevent noinc writes from clobbering cache
     - pwm: sti: Avoid conditional gotos
     - pwm: sti: Reduce number of allocations and drop usage of chip_data
     - pwm: brcmstb: Utilize appropriate clock APIs in suspend/resume
     - Input: synaptics-rmi4 - fix use after free in rmi_unregister_function()
     - llc: verify mac len before reading mac header
     - hsr: Prevent use after free in prp_create_tagged_frame()
     - tipc: Change nla_policy for bearer-related names to NLA_NUL_STRING
     - inet: shrink struct flowi_common
     - dccp: Call security_inet_conn_request() after setting IPv4 addresses.
     - dccp/tcp: Call security_inet_conn_request() after setting IPv6 addresses.
     - net: r8169: Disable multicast filter for RTL8168H and RTL8107E
     - Fix termination state for idr_for_each_entry_ul()
     - net: stmmac: xgmac: Enable support for multiple Flexible PPS outputs
     - net/smc: fix dangling sock under state SMC_APPFINCLOSEWAIT
     - net/smc: allow cdc msg send rather than drop it with NULL sndbuf_desc
     - net/smc: put sk reference if close work was canceled
     - tg3: power down device only on SYSTEM_POWER_OFF
     - r8169: respect userspace disabling IFF_MULTICAST
     - netfilter: xt_recent: fix (increase) ipv6 literal buffer length
     - netfilter: nft_redir: use `struct nf_nat_range2` throughout and
       deduplicate eval call-backs
     - netfilter: nat: fix ipv6 nat redirect with mapped and scoped addresses
     - [x86] Share definition of __is_canonical_address()
     - [x86] sev-es: Allow copy_from_kernel_nofault() in earlier boot
     - drm/syncobj: fix DRM_SYNCOBJ_WAIT_FLAGS_WAIT_AVAILABLE
     - fbdev: imsttfb: Fix error path of imsttfb_probe()
     - fbdev: imsttfb: fix a resource leak in probe
     - fbdev: fsl-diu-fb: mark wr_reg_wa() static
     - tracing/kprobes: Fix the order of argument descriptions
     - Revert "mmc: core: Capture correct oemid-bits for eMMC cards"
     - btrfs: use u64 for buffer sizes in the tree search ioctls
     https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.10.202
     - perf/core: Bail out early if the request AUX area is out of bound
     - [armhf] clocksource/drivers/timer-imx-gpt: Fix potential memory leak
     - [x86] mm: Drop the 4 MB restriction on minimal NUMA node memory size
     - wifi: mac80211_hwsim: fix clang-specific fortify warning
     - wifi: mac80211: don't return unset power in ieee80211_get_tx_power()
     - bpf: Detect IP == ksym.end as part of BPF program
     - wifi: ath9k: fix clang-specific fortify warnings
     - wifi: ath10k: fix clang-specific fortify warning
     - net: annotate data-races around sk->sk_tx_queue_mapping
     - net: annotate data-races around sk->sk_dst_pending_confirm
     - wifi: ath10k: Don't touch the CE interrupt registers after power up
     - Bluetooth: btusb: Add date->evt_skb is NULL check
     - Bluetooth: Fix double free in hci_conn_cleanup
     - [x86] platform/x86: thinkpad_acpi: Add battery quirk for Thinkpad X120e
     - [arm64] drm/msm/dp: skip validity check for DP CTS EDID checksum
     - drm/amd: Fix UBSAN array-index-out-of-bounds for SMU7
     - drm/amd: Fix UBSAN array-index-out-of-bounds for Polaris and Tonga
     - drm/amdgpu: Fix potential null pointer derefernce
     - drm/amdgpu: Fix a null pointer access when the smc_rreg pointer is NULL
     - ASoC: soc-card: Add storage for PCI SSID
     - crypto: pcrypt - Fix hungtask for PADATA_RESET
     - [amd64] RDMA/hfi1: Use FIELD_GET() to extract Link Width
     - fs/jfs: Add check for negative db_l2nbperpage
     - fs/jfs: Add validity check for db_maxag and db_agpref
     - jfs: fix array-index-out-of-bounds in dbFindLeaf
     - jfs: fix array-index-out-of-bounds in diAlloc
     - HID: lenovo: Detect quirk-free fw on cptkbd and stop applying workaround
     - [armel,armhf] 9320/1: fix stack depot IRQ stack filter
     - ALSA: hda: Fix possible null-ptr-deref when assigning a stream
     - atm: iphase: Do PCI error checks on own line
     - scsi: libfc: Fix potential NULL pointer dereference in
       fc_lport_ptp_setup()
     - HID: Add quirk for Dell Pro Wireless Keyboard and Mouse KM5221W
     - exfat: support handle zero-size directory
     - usb: gadget: f_ncm: Always set current gadget in ncm_bind()
     - 9p/trans_fd: Annotate data-racy writes to file::f_flags
     - [armhf] i2c: sun6i-p2wi: Prevent potential division by zero
     - media: gspca: cpia1: shift-out-of-bounds in set_flicker
     - media: vivid: avoid integer overflow
     - gfs2: ignore negated quota changes
     - gfs2: fix an oops in gfs2_permission
     - media: imon: fix access to invalid resource for the second interface
     - drm/amd/display: Avoid NULL dereference of timing generator
     - [armhf] ASoC: ti: omap-mcbsp: Fix runtime PM underflow warnings
     - drm/amdgpu: fix software pci_unplug on some chips
     - pwm: Fix double shift bug
     - wifi: iwlwifi: Use FW rate for non-data frames
     - xhci: turn cancelled td cleanup to its own function
     - SUNRPC: ECONNRESET might require a rebind
     - SUNRPC: Add an IS_ERR() check back to where it was
     - NFSv4.1: fix SP4_MACH_CRED protection for pnfs IO
     - SUNRPC: Fix RPC client cleaned up the freed pipefs dentries
     - gfs2: Silence "suspicious RCU usage in gfs2_permission" warning
     - ipvlan: add ipvlan_route_v6_outbound() helper
     - tty: Fix uninit-value access in ppp_sync_receive()
     - [arm64] net: hns3: fix variable may not initialized problem in
       hns3_init_mac_addr()
     - [arm64] net: hns3: fix VF reset fail issue
     - tipc: Fix kernel-infoleak due to uninitialized TLV value
     - ppp: limit MRU to 64K
     - xen/events: fix delayed eoi list handling
     - ptp: annotate data-race around q->head and q->tail
     - bonding: stop the device in bond_setup_by_slave()
     - netfilter: nf_conntrack_bridge: initialize err to 0
     - net: stmmac: fix rx budget limit check
     - net/mlx5e: fix double free of encap_header
     - net/mlx5_core: Clean driver version and name
     - net/mlx5e: Check return value of snprintf writing to fw_version buffer for
       representors
     - macvlan: Don't propagate promisc change to lower dev in passthru
     - cifs: spnego: add ';' in HOST_KEY_LEN
     - cifs: fix check of rc in function generate_smb3signingkey
     - [arm64] media: venus: hfi: add checks to perform sanity on queue pointers
     - [powerpc*] perf: Fix disabling BHRB and instruction sampling
     - bpf: Fix check_stack_write_fixed_off() to correctly spill imm
     - bpf: Fix precision tracking for BPF_ALU | BPF_TO_BE | BPF_END
     - scsi: mpt3sas: Fix loop logic
     - scsi: megaraid_sas: Increase register read retry rount from 3 to 30 for
       selected registers
     - [x86] cpu/hygon: Fix the CPU topology evaluation for real
     - [x86] KVM: x86: hyper-v: Don't auto-enable stimer on write from user-space
     - [x86] KVM: x86: Ignore MSR_AMD64_TW_CFG access
     - audit: don't take task_lock() in audit_exe_compare() code path
     - audit: don't WARN_ON_ONCE(!current->mm) in audit_exe_compare()
     - tty/sysrq: replace smp_processor_id() with get_cpu()
     - hvc/xen: fix console unplug
     - hvc/xen: fix error path in xen_hvc_init() to always register frontend
       driver
     - PCI/sysfs: Protect driver's D3cold preference from user space
     - watchdog: move softlockup_panic back to early_param
     - ACPI: resource: Do IRQ override on TongFang GMxXGxx
     - [arm64] Restrict CPU_BIG_ENDIAN to GNU as or LLVM IAS 15.x or newer
     - mmc: vub300: fix an error code
     - mmc: sdhci_am654: fix start loop index for TAP value parsing
     - PCI/ASPM: Fix L1 substate handling in aspm_attr_store_common()
     - [arm64] dts: qcom: ipq6018: Fix hwlock index for SMEM
     - PM: hibernate: Use __get_safe_page() rather than touching the list
     - PM: hibernate: Clean up sync_read handling in snapshot_write_next()
     - rcu: kmemleak: Ignore kmemleak false positives when RCU-freeing objects
     - btrfs: don't arbitrarily slow down delalloc if we're committing
     - [arm64] firmware: qcom_scm: use 64-bit calling convention only when client
       is 64-bit
     - ima: detect changes to the backing overlay file
     - wifi: ath11k: fix temperature event locking
     - wifi: ath11k: fix dfs radar event locking
     - wifi: ath11k: fix htt pktlog locking
     - mmc: meson-gx: Remove setting of CMD_CFG_ERROR
     - genirq/generic_chip: Make irq_remove_generic_chip() irqdomain aware
     - jbd2: fix potential data lost in recovering journal raced with
       synchronizing fs bdev
     - quota: explicitly forbid quota files from being encrypted
     - kernel/reboot: emergency_restart: Set correct system_state
     - i2c: core: Run atomic i2c xfer when !preemptible
     - mcb: fix error handling for different scenarios when parsing
     - [armhf] dmaengine: stm32-mdma: correct desc prep when channel running
     - mm/cma: use nth_page() in place of direct struct page manipulation
     - mm/memory_hotplug: use pfn math in place of direct struct page
       manipulation
     - mtd: cfi_cmdset_0001: Byte swap OTP info
     - xhci: Enable RPM on controllers that support low-power states
     - ALSA: info: Fix potential deadlock at disconnection
     - ALSA: hda/realtek - Add Dell ALC295 to pin fall back table
     - ALSA: hda/realtek - Enable internal speaker of ASUS K6500ZC
     - serial: meson: remove redundant initialization of variable id
     - tty: serial: meson: retrieve port FIFO size from DT
     - serial: meson: Use platform_get_irq() to get the interrupt
     - tty: serial: meson: fix hard LOCKUP on crtscts mode
     - cpufreq: stats: Fix buffer overflow detection in trans_stats()
     - Bluetooth: btusb: Add Realtek RTL8852BE support ID 0x0cb8:0xc559
     - bluetooth: Add device 0bda:887b to device tables
     - bluetooth: Add device 13d3:3571 to device tables
     - Bluetooth: btusb: Add RTW8852BE device 13d3:3570 to device tables
     - Bluetooth: btusb: Add 0bda:b85b for Fn-Link RTL8852BE
     - Revert ncsi: Propagate carrier gain/loss events to the NCSI controller
     - lsm: fix default return value for vm_enough_memory
     - lsm: fix default return value for inode_getsecctx
     - i2c: designware: Disable TX_EMPTY irq while waiting for block length byte
     - net: phylink: initialize carrier state at creation
     - i2c: i801: fix potential race in i801_block_transaction_byte_by_byte
     - f2fs: avoid format-overflow warning
     - media: lirc: drop trailing space from scancode transmit
     - media: sharp: fix sharp encoding
     - [arm64] media: venus: hfi_parser: Add check to keep the number of codecs
       within range
     - [arm64] media: venus: hfi: fix the check to handle session buffer
       requirement
     - [arm64] media: venus: hfi: add checks to handle capabilities from firmware
     - nfsd: fix file memleak on client_opens_release
     - mm: kmem: drop __GFP_NOFAIL when allocating objcg vectors
     - Revert "net: r8169: Disable multicast filter for RTL8168H and RTL8107E"
     - ext4: apply umask if ACL support is disabled
     - ext4: correct offset of gdb backup in non meta_bg group to update_backups
     - ext4: correct return value of ext4_convert_meta_bg
     - ext4: correct the start block of counting reserved clusters
     - ext4: remove gdb backup copy for meta bg in setup_new_flex_group_blocks
     - drm/amd/pm: Handle non-terminated overdrive commands.
     - drm/amdgpu: fix error handling in amdgpu_bo_list_get()
     - drm/amd/display: Change the DMCUB mailbox memory location from FB to inbox
     - io_uring/fdinfo: lock SQ thread while retrieving thread cpu/pid
       (CVE-2023-46862)
     - tracing: Have trace_event_file have ref counters
     - netfilter: nftables: update table flags from the commit phase
     - netfilter: nf_tables: fix table flag updates
     - netfilter: nf_tables: disable toggling dormant table state more than once
     https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.10.203
     - RDMA/irdma: Prevent zero-length STAG registration (CVE-2023-25775)
     - afs: Fix afs_server_list to be cleaned up with RCU
     - afs: Make error on cell lookup failure consistent with OpenAFS
     - [arm64,armhf] drm/panel: simple: Fix Innolux G101ICE-L01 bus flags
     - [arm64,armhf] drm/panel: simple: Fix Innolux G101ICE-L01 timings
     - wireguard: use DEV_STATS_INC()
     - ata: pata_isapnp: Add missing error check for devm_ioport_map()
     - [arm64,armhf] drm/rockchip: vop: Fix color for RGB888/BGR888 format on VOP
       full
     - HID: core: store the unique system identifier in hid_device
     - HID: fix HID device resource race between HID core and debugging support
     - ipv4: Correct/silence an endian warning in __ip_do_redirect
     - net: usb: ax88179_178a: fix failed operations during ax88179_reset
     - net/smc: avoid data corruption caused by decline
     - [armhf] xen: fix xen_vcpu_info allocation alignment
     - [amd64,arm64] amd-xgbe: handle corner-case during sfp hotplug
     - [amd64,arm64] amd-xgbe: handle the corner-case during tx completion
     - [amd64,arm64] amd-xgbe: propagate the correct speed and duplex status
     - afs: Return ENOENT if no cell DNS record can be found
     - afs: Fix file locking on R/O volumes to operate in local mode
     - nvmet: remove unnecessary ctrl parameter
     - nvmet: nul-terminate the NQNs passed in the connect command
       (CVE-2023-6121)
     - [arm64] USB: dwc3: qcom: fix resource leaks on probe deferral
     - [arm64] USB: dwc3: qcom: fix ACPI platform device leak
     - lockdep: Fix block chain corruption
     - ext4: add a new helper to check if es must be kept
     - ext4: factor out __es_alloc_extent() and __es_free_extent()
     - ext4: use pre-allocated es in __es_insert_extent()
     - ext4: use pre-allocated es in __es_remove_extent()
     - ext4: using nofail preallocation in ext4_es_remove_extent()
     - ext4: using nofail preallocation in ext4_es_insert_delayed_block()
     - ext4: using nofail preallocation in ext4_es_insert_extent()
     - ext4: fix slab-use-after-free in ext4_es_insert_extent()
     - ext4: make sure allocate pending entry not fail
     - nfsd: lock_rename() needs both directories to live on the same fs
     - [arm*] ASoC: simple-card: fixup asoc_simple_probe() error handling
     - ACPI: resource: Skip IRQ override on ASUS ExpertBook B1402CVA
     - swiotlb-xen: provide the "max_mapping_size" method
     - bcache: replace a mistaken IS_ERR() by IS_ERR_OR_NULL() in
       btree_gc_coalesce()
     - bcache: fixup multi-threaded bch_sectors_dirty_init() wake-up race
     - [s390x] dasd: protect device queue against concurrent access
     - USB: serial: option: add Luat Air72*U series products
     - [x86] hv_netvsc: Fix race of register_netdevice_notifier and VF register
     - [x86] hv_netvsc: Mark VF as slave before exposing it to user-mode
     - dm-delay: fix a race between delay_presuspend and delay_bio
     - bcache: check return value from btree_node_alloc_replacement()
     - bcache: prevent potential division by zero error
     - bcache: fixup init dirty data errors
     - bcache: fixup lock c->root error
     - USB: serial: option: add Fibocom L7xx modules
     - USB: serial: option: fix FM101R-GL defines
     - USB: serial: option: don't claim interface 4 for ZTE MF290
     - [arm*] USB: dwc2: write HCINT with INTMASK applied
     - [arm64,armhf] usb: dwc3: Fix default mode initialization
     - [arm64,armhf] usb: dwc3: set the dma max_seg_size
     - [arm64,armhf] USB: dwc3: qcom: fix wakeup after probe deferral
     - io_uring: fix off-by one bvec index
     - pinctrl: avoid reload of p state in list iteration
     - firewire: core: fix possible memory leak in create_units()
     - mmc: block: Do not lose cache flush during CQE error recovery
     - ALSA: hda: Disable power-save on KONTRON SinglePC
     - ALSA: hda/realtek: Headset Mic VREF to 100%
     - ALSA: hda/realtek: Add supported ALC257 for ChromeOS
     - dm-verity: align struct dm_verity_fec_io properly
     - dm verity: don't perform FEC for failed readahead IO
     - bcache: revert replacing IS_ERR_OR_NULL with IS_ERR
     - [amd64] iommu/vt-d: Add MTL to quirk list to skip TE disabling
     - [powerpc*] Don't clobber f0/vs0 during fp|altivec register save
       (Closes: #1032104)
     - btrfs: add dmesg output for first mount and last unmount of a filesystem
     - btrfs: ref-verify: fix memory leaks in btrfs_ref_tree_mod()
     - btrfs: fix off-by-one when checking chunk map includes logical address
     - btrfs: send: ensure send_fd is writable
     - btrfs: make error messages more clear when getting a chunk map
     - Input: xpad - add HyperX Clutch Gladiate Support
     - [x86] hv_netvsc: fix race of netvsc and VF register_netdevice
     - USB: core: Change configuration warnings to notices
     - usb: config: fix iteration issue in 'usb_get_bos_descriptor()'
     - ipv4: igmp: fix refcnt uaf issue when receiving igmp query packet
       (CVE-2023-6932)
     - [arm64] dpaa2-eth: increase the needed headroom to account for alignment
     - net: stmmac: xgmac: Disable FPE MMC interrupts
     - Revert "workqueue: remove unused cancel_work()"
     - r8169: prevent potential deadlock in rtl8169_close
     - smb3: fix touch -h of symlink
     - [x86] ASoC: Intel: Move soc_intel_is_foo() helpers to a generic header
     - [x86] ASoC: SOF: sof-pci-dev: use community key on all Up boards
     - [x86] ASoC: SOF: sof-pci-dev: add parameter to override topology filename
     - [x86] ASoC: SOF: sof-pci-dev: don't use the community key on APL
       Chromebooks
     - [x86] ASoC: SOF: sof-pci-dev: Fix community key quirk detection
     - [s390x] mm: fix phys vs virt confusion in mark_kernel_pXd() functions
       family
     - [s390x] cmma: fix detection of DAT pages
     - ima: annotate iint mutex to avoid lockdep false positive warnings
     - driver core: Move the "removable" attribute from USB to core
     - drm/amdgpu: don't use ATRM for external devices
     - fs: add ctime accessors infrastructure
     - smb3: fix caching of ctime on setxattr
     - scsi: core: Introduce the scsi_cmd_to_rq() function
     - scsi: qla2xxx: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
     - scsi: qla2xxx: Fix system crash due to bad pointer access
     - [armhf] cpufreq: imx6q: don't warn for disabling a non-existing frequency
     - [armhf] cpufreq: imx6q: Don't disable 792 Mhz OPP unnecessarily
     - mmc: cqhci: Increase recovery halt timeout
     - mmc: cqhci: Warn of halt or task clear failure
     - mmc: cqhci: Fix task clearing in CQE error recovery
     - mmc: core: convert comma to semicolon
     - mmc: block: Retry commands in CQE error recovery
     - mmc: core: add helpers mmc_regulator_enable/disable_vqmmc
     - r8169: disable ASPM in case of tx timeout
     - r8169: fix deadlock on RTL8125 in jumbo mtu mode
     - driver core: Release all resources during unbind before updating device
       links
     https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.10.204
     - hrtimers: Push pending hrtimers away from outgoing CPU earlier
     - i2c: designware: Fix corrupted memory seen in the ISR
     - netfilter: ipset: fix race condition between swap/destroy and kernel side
       add/del/test
     - tg3: Move the [rt]x_dropped counters to tg3_napi
     - tg3: Increment tx_dropped in tg3_tso_bug()
     - kconfig: fix memory leak from range properties
     - drm/amdgpu: correct chunk_ptr to a pointer to chunk.
     - [x86] platform/x86: asus-wmi: Add support for SW_TABLET_MODE on UX360
     - [x86] platform/x86: asus-nb-wmi: Allow configuring SW_TABLET_MODE method
       with a module option
     - [x86] platform/x86: asus-nb-wmi: Add tablet_mode_sw=lid-flip quirk for the
       TP200s
     - [x86] asus-wmi: Add dgpu disable method
     - [x86] platform/x86: asus-wmi: Adjust tablet/lidflip handling to use enum
     - [x86] platform/x86: asus-wmi: Add support for ROG X13 tablet mode
     - [x86] platform/x86: asus-wmi: Simplify tablet-mode-switch probing
     - [x86] platform/x86: asus-wmi: Simplify tablet-mode-switch handling
     - [x86] platform/x86: asus-wmi: Move i8042 filter install to shared asus-wmi
       code
     - of: base: Fix some formatting issues and provide missing descriptions
     - of: Fix kerneldoc output formatting
     - of: Add missing 'Return' section in kerneldoc comments
     - of: dynamic: Fix of_reconfig_get_state_change() return value documentation
     - ipv6: fix potential NULL deref in fib6_add()
     - hv_netvsc: rndis_filter needs to select NLS
     - net: arcnet: com20020 fix error handling
     - arcnet: restoring support for multiple Sohard Arcnet cards
     - i40e: Fix unexpected MFS warning message
     - net: bnxt: fix a potential use-after-free in bnxt_init_tc
     - ipv4: ip_gre: Avoid skb_pull() failure in ipgre_xmit()
     - [arm64] net: hns: fix fake link up on xge port
     - netfilter: xt_owner: Fix for unsafe access of sk->sk_socket
     - tcp: do not accept ACK of bytes we never sent
     - bpf: sockmap, updating the sg structure should also update curr
     - [arm64] tee: optee: Fix supplicant based device enumeration
     - RDMA/bnxt_re: Correct module description string
     - [x86] hwmon: (acpi_power_meter) Fix 4.29 MW bug
     - tracing: Fix a warning when allocating buffered events fails
     - scsi: be2iscsi: Fix a memleak in beiscsi_init_wrb_handle()
     - [armhf] imx: Check return value of devm_kasprintf in imx_mmdc_perf_init
     - ALSA: pcm: fix out-of-bounds in snd_pcm_state_names
     - ALSA: hda/realtek: Enable headset on Lenovo M90 Gen5
     - nilfs2: fix missing error check for sb_set_blocksize call
     - nilfs2: prevent WARNING in nilfs_sufile_set_segment_usage()
     - checkstack: fix printed address
     - tracing: Always update snapshot buffer size
     - tracing: Disable snapshot buffer when stopping instance tracers
     - tracing: Fix incomplete locking when disabling buffered events
     - tracing: Fix a possible race when disabling buffered events
     - packet: Move reference count in packet_sock to atomic_long_t
     - [x86] misc: mei: client.c: return negative error code in mei_cl_write
     - [x86] misc: mei: client.c: fix problem of return '-EOVERFLOW' in
       mei_cl_write
     - ring-buffer: Force absolute timestamp on discard of event
     - tracing: Set actual size after ring buffer resize
     - tracing: Stop current tracer when resizing buffer
     - perf/core: Add a new read format to get a number of lost samples
     - perf: Fix perf_event_validate_size() (CVE-2023-6931)
     - gpiolib: sysfs: Fix error handling on failed export
     - drm/amdgpu: correct the amdgpu runtime dereference usage count
     - usb: gadget: f_hid: fix report descriptor allocation
     - parport: Add support for Brainboxes IX/UC/PX parallel cards
     - Revert "xhci: Loosen RPM as default policy to cover for AMD xHC 1.1"
     - usb: typec: class: fix typec_altmode_put_partner to put plugs
     - [arm*] PL011: Fix DMA support
     - [x86] CPU/AMD: Check vendor in the AMD microcode callback
     - [s390x] KVM: s390/mm: Properly reset no-dat
     - [mips*] Loongson64: Reserve vgabios memory on boot
     - [mips*] Loongson64: Enable DMA noncoherent support
     - io_uring/af_unix: disable sending io_uring over sockets (CVE-2023-6531)
     - netlink: don't call ->netlink_bind with table lock held
     - genetlink: add CAP_NET_ADMIN test for multicast bind
     - psample: Require 'CAP_NET_ADMIN' when joining "packets" group
     - drop_monitor: Require 'CAP_SYS_ADMIN' when joining "events" group
     - netfilter: nft_set_pipapo: skip inactive elements during set walk
       (CVE-2023-6817)
     - [x86] platform/x86: asus-wmi: Fix kbd_dock_devid tablet-switch reporting
     - [x86] platform/x86: asus-wmi: Document the dgpu_disable sysfs attribute
     - mmc: block: Be sure to wait while busy in CQE error recovery
     - Revert "btrfs: add dmesg output for first mount and last unmount of a
       filesystem"
     - cifs: Fix non-availability of dedup breaking generic/304
     - smb: client: fix potential NULL deref in parse_dfs_referrals()
     - devcoredump : Serialize devcd_del work
     - devcoredump: Send uevent once devcd is ready
     - r8169: fix rtl8125b PAUSE frames blasting when suspended
     https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.10.205
     - netfilter: nf_tables: fix 'exist' matching on bigendian arches
     - afs: Fix refcount underflow from error handling race (Closes: #1052304)
     - HID: lenovo: Restrict detection of patched firmware only to USB cptkbd
     - net: ipv6: support reporting otherwise unknown prefix flags in
       RTM_NEWPREFIX
     - atm: solos-pci: Fix potential deadlock on &cli_queue_lock
     - atm: solos-pci: Fix potential deadlock on &tx_queue_lock
     - net: vlan: introduce skb_vlan_eth_hdr()
     - net: fec: correct queue selection
     - atm: Fix Use-After-Free in do_vcc_ioctl (CVE-2023-51780)
     - net/rose: Fix Use-After-Free in rose_ioctl (CVE-2023-51782)
     - qed: Fix a potential use-after-free in qed_cxt_tables_alloc
     - net: Remove acked SYN flag from packet in the transmit queue correctly
     - net: ena: Destroy correct number of xdp queues upon failure
     - net: ena: Fix XDP redirection error
     - sign-file: Fix incorrect return values check
     - vsock/virtio: Fix unsigned integer wrap around in
       virtio_transport_has_space()
     - net: stmmac: use dev_err_probe() for reporting mdio bus registration
       failure
     - net: stmmac: Handle disabled MDIO busses from devicetree
     - appletalk: Fix Use-After-Free in atalk_ioctl (CVE-2023-51781)
     - net: atlantic: fix double free in ring reinit logic
     - cred: switch to using atomic_long_t
     - fuse: dax: set fc->dax to NULL in fuse_dax_conn_free()
     - ALSA: hda/hdmi: add force-connect quirks for ASUSTeK Z170 variants
     - ALSA: hda/realtek: Apply mute LED quirk for HP15-db
     - Revert "PCI: acpiphp: Reassign resources on bridge if necessary"
     - PCI: loongson: Limit MRRS to 256 (Closes: #1035587)
     - usb: aqc111: check packet for fixup for true limit
     - blk-throttle: fix lockdep warning of "cgroup_mutex or RCU read lock
       required!"
     - bcache: avoid oversize memory allocation by small stripe_size
     - bcache: remove redundant assignment to variable cur_idx
     - bcache: add code comments for bch_btree_node_get() and
       __bch_btree_node_alloc()
     - bcache: avoid NULL checking to c->root in run_cache_set()
     - [x86] platform/x86: intel_telemetry: Fix kernel doc descriptions
     - HID: glorious: fix Glorious Model I HID report
     - HID: add ALWAYS_POLL quirk for Apple kb
     - HID: hid-asus: reset the backlight brightness level on resume
     - HID: multitouch: Add quirk for HONOR GLO-GXXX touchpad
     - asm-generic: qspinlock: fix queued_spin_value_unlocked() implementation
     - net: usb: qmi_wwan: claim interface 4 for ZTE MF290
     - HID: hid-asus: add const to read-only outgoing usb buffer
     - perf: Fix perf_event_validate_size() lockdep splat
     - soundwire: stream: fix NULL pointer dereference for multi_link
     - ext4: prevent the normalized size from exceeding EXT_MAX_BLOCKS
     - [arm64] mm: Always make sw-dirty PTEs hw-dirty in pte_modify
     - team: Fix use-after-free when an option instance allocation fails
     - ring-buffer: Fix memory leak of free page
     - tracing: Update snapshot buffer on resize if it is allocated
     - ring-buffer: Have saved event hold the entire event
     - ring-buffer: Fix writing to the buffer with max_data_size
     - ring-buffer: Fix a race in rb_time_cmpxchg() for 32 bit archs
     - USB: gadget: core: adjust uevent timing on gadget unbind
     - tty: n_gsm: fix tty registration before control channel open
     - tty: n_gsm, remove duplicates of parameters
     - tty: n_gsm: add sanity check for gsm->receive in gsm_receive_buf()
     - [powerpc*] ftrace: Create a dummy stackframe to fix stack unwind
     - [powerpc*] ftrace: Fix stack teardown in ftrace_no_trace
 .
   [ Salvatore Bonaccorso ]
   * Bump ABI to 27
   * [rt] Refresh "net: Properly annotate the try-lock for the seqlock"
     Adapt to changes from upstream a8dd21118b0f ("seqlock: Prefix internal
     seqcount_t-only macros with a "do_"") in 5.10.198.
   * Refresh "arm64: compat: Implement misalignment fixups for multiword loads"
   * Do not enable DEBUG_PREEMPT (not enabled by default since 5.10.199)
   * [rt] Update to 5.10.201-rt98
   * [rt] Update to 5.10.204-rt100
   * [arm64] drivers/vfio: Don't enable VFIO_NOIOMMU.
     This is a breach of the integrity lockdown requirement of secure boot
     and thus cannot be enabled.
     Thanks to Bastian Blank and Ben Hutchings
   * netfilter: nf_tables: skip set commit for deleted/destroyed sets
Checksums-Sha1:
 e634b8ce79684f8b6e2e4aee29f041f699f6dd25 205890 linux_5.10.205-1.dsc
 1b02cbaa07c770056247920ee3c9796f67b3edd1 121904328 linux_5.10.205.orig.tar.xz
 1f5cb503c6a92ddd096d6d5d823073d6f5ffe76d 1644312 linux_5.10.205-1.debian.tar.xz
 73610e40936ad2dbe5948ca2676f40c184e40f9c 7009 linux_5.10.205-1_source.buildinfo
Checksums-Sha256:
 6e941d3f6e372c75e57adcadfe91d4d4a59046fe767b8f9308104a35ed7b561a 205890 linux_5.10.205-1.dsc
 878658989952ffdc22928faf15dfa6c66ea9a5e49b412e5ba3bc16784ae1f1b6 121904328 linux_5.10.205.orig.tar.xz
 f5dd034a5847a0a1e67cd9607fd89e642b3088a6779b705c2abb764d05ae8975 1644312 linux_5.10.205-1.debian.tar.xz
 e981444539aeef6d8388a4ba087d6141c95ca1f95da69fe9051eb582be6ff554 7009 linux_5.10.205-1_source.buildinfo
Files:
 38c1ad229a162e7c1c8807af759e492c 205890 kernel optional linux_5.10.205-1.dsc
 96e130d88a20da49d9668454fe5bda83 121904328 kernel optional linux_5.10.205.orig.tar.xz
 b042fa2c3770de666d55b22f9070a53a 1644312 kernel optional linux_5.10.205-1.debian.tar.xz
 8b94dfc935fe7acdeb780c8af784bdfa 7009 kernel optional linux_5.10.205-1_source.buildinfo

-----BEGIN PGP SIGNATURE-----
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=f5Id
-----END PGP SIGNATURE-----

--- End Message ---

Reply to: