--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: please enable SC8280XP sound modules
- From: Dmitry Baryshkov <dbaryshkov@gmail.com>
- Date: Mon, 30 Oct 2023 20:30:03 +0200
- Message-id: <169869060356.28805.16526373948015177732.reportbug@rohan.lan>
Package: src:linux
Version: 6.5.8-1
Severity: normal
Please enable the following options as modules to enable audio support
on Lenovo X13s platform:
CONFIG_SND_SOC_SC8280XP
CONFIG_SC_LPASSCC_8280XP
--
With best wishes
Dmitry
-- Package-specific info:
** Version:
Linux version 6.5.0-3-arm64 (debian-kernel@lists.debian.org) (gcc-13 (Debian 13.2.0-5) 13.2.0, GNU ld (GNU Binutils for Debian) 2.41) #1 SMP Debian 6.5.8-1 (2023-10-22)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-6.5.0-3-arm64 root=UUID=88586ed9-a0b9-45ec-b5db-5059b8edcbf1 ro arm64.nopauth
** Not tainted
** Kernel log:
[ 22.754825] ath11k_pci 0006:01:00.0: failed to power up mhi: -110
[ 22.754881] ath11k_pci 0006:01:00.0: failed to start mhi: -110
[ 22.754907] ath11k_pci 0006:01:00.0: failed to power up :-110
[ 22.771154] ath11k_pci 0006:01:00.0: failed to create soc core: -110
[ 22.771181] ath11k_pci 0006:01:00.0: failed to init core: -110
[ 22.955707] ath11k_pci: probe of 0006:01:00.0 failed with error -110
[ 65.164561] hub 4-1:1.0: hub_ext_port_status failed (err = -71)
[ 65.169792] usb 4-1-port3: cannot reset (err = -71)
[ 65.174772] usb 4-1-port3: cannot reset (err = -71)
[ 65.180027] usb 4-1-port3: cannot reset (err = -71)
[ 65.184234] usb 4-1-port3: cannot reset (err = -71)
[ 65.188812] usb 4-1-port3: cannot reset (err = -71)
[ 65.191537] usb 4-1-port3: Cannot enable. Maybe the USB cable is bad?
[ 65.195067] usb 4-1-port3: cannot disable (err = -71)
[ 65.198956] hub 4-1:1.0: hub_ext_port_status failed (err = -71)
[ 65.204116] usb 4-1-port3: cannot reset (err = -71)
[ 65.208694] usb 4-1-port3: cannot reset (err = -71)
[ 65.212830] usb 4-1-port3: cannot reset (err = -71)
[ 65.216364] usb 4-1-port3: cannot reset (err = -71)
[ 65.220313] usb 4-1-port3: cannot reset (err = -71)
[ 65.222368] usb 4-1-port3: Cannot enable. Maybe the USB cable is bad?
[ 65.225303] usb 4-1-port3: cannot disable (err = -71)
[ 65.228485] hub 4-1:1.0: hub_ext_port_status failed (err = -71)
[ 65.231826] usb 4-1-port3: cannot reset (err = -71)
[ 65.234887] usb 4-1-port3: cannot reset (err = -71)
[ 65.238079] usb 4-1-port3: cannot reset (err = -71)
[ 65.239198] usb 3-1: USB disconnect, device number 2
[ 65.241544] usb 3-1.4: USB disconnect, device number 3
[ 65.243672] usb 4-1-port3: cannot reset (err = -71)
[ 65.257055] usb 4-1: USB disconnect, device number 2
[ 65.259859] usb 4-1.3: USB disconnect, device number 3
[ 65.260552] usb 4-1-port3: cannot reset (err = -71)
[ 65.265377] usb 4-1-port3: Cannot enable. Maybe the USB cable is bad?
[ 65.352362] usb 4-1.4: USB disconnect, device number 4
[ 111.062931] ath11k_pci 0006:01:00.0: BAR 0: assigned [mem 0x30400000-0x305fffff 64bit]
[ 111.078027] ath11k_pci 0006:01:00.0: MSI vectors: 32
[ 111.080194] ath11k_pci 0006:01:00.0: wcn6855 hw2.1
[ 111.275537] mhi mhi1: Requested to power ON
[ 111.277673] mhi mhi1: Power on setup success
[ 111.279256] mhi mhi1: firmware: direct-loading firmware ath11k/WCN6855/hw2.1/amss.bin
[ 113.030380] mhi mhi1: Wait for device to enter SBL or Mission mode
[ 115.605122] qcom-soundwire 3210000.soundwire-controller: Failed to get cgcr reset ctrl required for SW gating
[ 115.606035] qcom-soundwire 3250000.soundwire-controller: Failed to get cgcr reset ctrl required for SW gating
[ 115.607279] qcom-soundwire 3330000.soundwire-controller: Failed to get cgcr reset ctrl required for SW gating
[ 115.617805] qcom-soundwire 3210000.soundwire-controller: Failed to get cgcr reset ctrl required for SW gating
[ 115.619137] qcom-soundwire 3250000.soundwire-controller: Failed to get cgcr reset ctrl required for SW gating
[ 115.620308] qcom-soundwire 3330000.soundwire-controller: Failed to get cgcr reset ctrl required for SW gating
[ 115.632156] ath11k_pci 0006:01:00.0: chip_id 0x2 chip_family 0xb board_id 0x8c soc_id 0x400c0210
[ 115.632966] ath11k_pci 0006:01:00.0: fw_version 0x110b196e fw_build_timestamp 2022-12-22 12:54 fw_build_id WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23
[ 115.638474] ath11k_pci 0006:01:00.0: firmware: direct-loading firmware ath11k/WCN6855/hw2.1/board-2.bin
[ 115.652049] ath11k_pci 0006:01:00.0: firmware: direct-loading firmware ath11k/WCN6855/hw2.1/board-2.bin
[ 115.683354] ath11k_pci 0006:01:00.0: firmware: direct-loading firmware ath11k/WCN6855/hw2.1/m3.bin
[ 116.198662] ath11k_pci 0006:01:00.0 wlP6p1s0: renamed from wlan0
[ 116.286806] warning: `iwconfig' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
[ 122.920684] wlP6p1s0: authenticate with d8:47:32:c2:8f:7e
[ 123.118676] wlP6p1s0: send auth to d8:47:32:c2:8f:7e (try 1/3)
[ 123.127462] wlP6p1s0: authenticated
[ 123.139120] wlP6p1s0: associate with d8:47:32:c2:8f:7e (try 1/3)
[ 123.144188] wlP6p1s0: RX AssocResp from d8:47:32:c2:8f:7e (capab=0x11 status=0 aid=3)
[ 123.162752] wlP6p1s0: associated
[ 554.559436] systemd-journald[299]: Time jumped backwards, rotating.
[ 756.424925] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 756.426082] Bluetooth: BNEP filters: protocol multicast
[ 756.427205] Bluetooth: BNEP socket layer initialized
[ 795.497044] audit: type=1400 audit(1698690062.331:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=17502 comm="apparmor_parser"
[ 795.497689] audit: type=1400 audit(1698690062.331:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=17502 comm="apparmor_parser"
[ 795.498242] audit: type=1400 audit(1698690062.331:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=17502 comm="apparmor_parser"
[ 808.011451] SGI XFS with ACLs, security attributes, realtime, quota, no debug enabled
[ 808.018178] JFS: nTxBlock = 8192, nTxLock = 65536
[ 808.055938] QNX4 filesystem 0.2.3 registered.
[ 808.135104] raid6: neonx8 gen() 13333 MB/s
[ 808.203103] raid6: neonx4 gen() 13135 MB/s
[ 808.271102] raid6: neonx2 gen() 12812 MB/s
[ 808.339428] raid6: neonx1 gen() 10843 MB/s
[ 808.407104] raid6: int64x8 gen() 8023 MB/s
[ 808.475104] raid6: int64x4 gen() 7548 MB/s
[ 808.543103] raid6: int64x2 gen() 6405 MB/s
[ 808.611105] raid6: int64x1 gen() 5086 MB/s
[ 808.611757] raid6: using algorithm neonx8 gen() 13333 MB/s
[ 808.679103] raid6: .... xor() 10666 MB/s, rmw enabled
[ 808.679751] raid6: using neon recovery algorithm
[ 808.681934] xor: measuring software checksum speed
[ 808.682782] 8regs : 27247 MB/sec
[ 808.683624] 32regs : 26944 MB/sec
[ 808.684281] arm64_neon : 45956 MB/sec
[ 808.684711] xor: using function: arm64_neon (45956 MB/sec)
[ 808.704280] Btrfs loaded, zoned=yes, fsverity=yes
[ 811.776340] audit: type=1400 audit(1698690078.611:12): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oosplash" pid=20483 comm="apparmor_parser"
[ 811.819035] audit: type=1400 audit(1698690078.651:13): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=20489 comm="apparmor_parser"
[ 814.829639] audit: type=1400 audit(1698690081.663:14): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice" pid=20495 comm="apparmor_parser"
[ 814.830193] audit: type=1400 audit(1698690081.663:15): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice//gpg" pid=20495 comm="apparmor_parser"
[ 814.877092] audit: type=1400 audit(1698690081.711:16): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=20501 comm="apparmor_parser"
[ 830.744421] audit: type=1400 audit(1698690097.579:17): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/libexec/geoclue" pid=26297 comm="apparmor_parser"
[ 833.368260] audit: type=1400 audit(1698690100.203:18): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=26369 comm="apparmor_parser"
[ 833.368787] audit: type=1400 audit(1698690100.203:19): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=26369 comm="apparmor_parser"
[ 833.369210] audit: type=1400 audit(1698690100.203:20): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//snap_browsers" pid=26369 comm="apparmor_parser"
[ 833.371673] audit: type=1400 audit(1698690100.207:21): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=26369 comm="apparmor_parser"
[ 833.372180] audit: type=1400 audit(1698690100.207:22): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer//sanitized_helper" pid=26369 comm="apparmor_parser"
[ 833.372842] audit: type=1400 audit(1698690100.207:23): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=26369 comm="apparmor_parser"
[ 1035.576345] audit: type=1400 audit(1698690302.411:24): apparmor="STATUS" operation="profile_load" profile="unconfined" name="system_tor" pid=27625 comm="apparmor_parser"
** Model information
Device Tree model: Lenovo ThinkPad X13s
** Loaded modules:
btrfs
blake2b_generic
xor
xor_neon
raid6_pq
ufs
qnx4
hfsplus
hfs
cdrom
minix
msdos
jfs
xfs
libcrc32c
bnep
aes_ce_ccm
michael_mic
qrtr_mhi
ath11k_pci
q6prm_clocks
q6apm_lpass_dais
snd_q6dsp_common
q6apm_dai
q6prm
sd_mod
sg
uas
usb_storage
scsi_mod
scsi_common
xhci_plat_hcd
xhci_hcd
snd_q6apm
usbcore
panel_edp
nls_ascii
nls_cp437
vfat
fat
apr
fastrpc
qrtr_smd
dwc3
governor_simpleondemand
snd_soc_hdmi_codec
mhi_wwan_mbim
mhi_wwan_ctrl
udc_core
wwan
hci_uart
roles
btqca
pm8941_pwrkey
btrtl
ulpi
ath11k
btbcm
qcom_battmgr
pmic_glink_altmode
btintel
mac80211
libarc4
bluetooth
aes_ce_blk
aes_ce_cipher
cfg80211
polyval_ce
polyval_generic
ecdh_generic
qcom_spmi_adc5
qcom_spmi_temp_alarm
qcom_vadc_common
qcom_pon
nvmem_qcom_spmi_sdam
ghash_ce
industrialio
reboot_mode
gf128mul
sha2_ce
snd_soc_wcd938x
ecc
sha256_arm64
snd_soc_wcd938x_sdw
sha1_ce
gpio_sbu_mux
snd_soc_wcd_mbhc
qcom_stats
qcom_tsens
dispcc_sc8280xp
snd_soc_lpass_rx_macro
snd_soc_lpass_tx_macro
soundwire_qcom
snd_soc_lpass_va_macro
slimbus
mhi_pci_generic
rfkill
regmap_sdw
soundwire_bus
snd_soc_lpass_wsa_macro
qcom_q6v5_pas
mhi
snd_soc_lpass_macro_common
dwc3_qcom
qcom_pil_info
usb_common
icc_bwmon
qcom_common
snd_soc_core
qcom_glink_smem
qrtr
qcom_ipcc
qcom_glink
gpucc_sc8280xp
snd_compress
qcom_smd
qcom_hwspinlock
snd_pcm_dmaengine
qcom_q6v5
pmic_glink
snd_pcm
qcom_sysmon
pdr_interface
snd_timer
icc_osm_l3
qcom_wdt
qcom_cpufreq_hw
qcom_rng
qmi_helpers
rpmsg_core
smp2p
snd
gpio_keys
leds_gpio
soundcore
smem
hid_multitouch
fuse
loop
dm_mod
efi_pstore
dax
configfs
efivarfs
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
msm
nvme
joydev
evdev
nvme_core
hid_generic
t10_pi
mdt_loader
drm_dp_aux_bus
i2c_hid_of
ocmem
i2c_hid
gpu_sched
hid
drm_display_helper
crc64_rocksoft
phy_qcom_qmp_combo
crc64
leds_qcom_lpg
crc_t10dif
crct10dif_generic
led_class_multicolor
rtc_pm8xxx
i2c_qcom_geni
drm_kms_helper
pinctrl_sc8280xp
qcom_spmi_pmic
drm
crct10dif_ce
pinctrl_sc8280xp_lpass_lpi
crct10dif_common
phy_qcom_edp
typec
llcc_qcom
phy_qcom_snps_femto_v2
pinctrl_lpass_lpi
qcom_rpmh_regulator
gcc_sc8280xp
phy_qcom_qmp_pcie
fixed
qnoc_sc8280xp
pwm_bl
** PCI devices:
0002:00:00.0 PCI bridge [0604]: Qualcomm Technologies, Inc SC8280XP PCI Express Root Port [17cb:010e] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 169
Region 0: Memory at 3c400000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=01, subordinate=ff, sec-latency=0
I/O behind bridge: [disabled] [16-bit]
Memory behind bridge: 3c300000-3c3fffff [size=1M] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
0002:01:00.0 Non-Volatile memory controller [0108]: Shenzhen Unionmemory Information System Ltd. AM630 PCIe 4.0 x4 NVMe SSD Controller [1cc4:6303] (rev 03) (prog-if 02 [NVM Express])
Subsystem: Shenzhen Unionmemory Information System Ltd. AM630 PCIe 4.0 x4 NVMe SSD Controller [1cc4:6303]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 168
Region 0: Memory at 3c300000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: nvme
Kernel modules: nvme
0004:00:00.0 PCI bridge [0604]: Qualcomm Technologies, Inc SC8280XP PCI Express Root Port [17cb:010e] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 167
Region 0: Memory at 34400000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=01, subordinate=ff, sec-latency=0
I/O behind bridge: [disabled] [16-bit]
Memory behind bridge: 34300000-343fffff [size=1M] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
0004:01:00.0 Wireless controller [0d40]: Foxconn International, Inc. T99W175 5G Modem [Snapdragon X55] [105b:e0c3]
Subsystem: Foxconn International, Inc. T99W175 5G Modem [Snapdragon X55] [105b:e0c3]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin ? routed to IRQ 191
Region 0: Memory at 34300000 (64-bit, non-prefetchable) [size=4K]
Region 2: Memory at 34301000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: mhi-pci-generic
Kernel modules: mhi_pci_generic
0006:00:00.0 PCI bridge [0604]: Qualcomm Technologies, Inc SC8280XP PCI Express Root Port [17cb:010e] (prog-if 00 [Normal decode])
Device tree node: /sys/firmware/devicetree/base/soc@0/pcie@1c00000/pcie@0
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 171
Region 0: Memory at 30300000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=01, subordinate=ff, sec-latency=0
I/O behind bridge: [disabled] [16-bit]
Memory behind bridge: 30400000-305fffff [size=2M] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
0006:01:00.0 Network controller [0280]: Qualcomm Technologies, Inc QCNFA765 Wireless Network Adapter [17cb:1103] (rev 01)
Subsystem: Qualcomm Technologies, Inc QCNFA765 Wireless Network Adapter [17cb:0108]
Device tree node: /sys/firmware/devicetree/base/soc@0/pcie@1c00000/pcie@0/wifi@0
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin ? routed to IRQ 238
Region 0: Memory at 30400000 (64-bit, non-prefetchable) [size=2M]
Capabilities: <access denied>
Kernel driver in use: ath11k_pci
Kernel modules: ath11k_pci
** USB devices:
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: trixie/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: arm64 (aarch64)
Kernel: Linux 6.5.0-3-arm64 (SMP w/8 CPU threads)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-6.5.0-3-arm64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.142
ii kmod 30+20230601-2
ii linux-base 4.9
Versions of packages linux-image-6.5.0-3-arm64 recommends:
ii apparmor 3.0.12-1
ii firmware-linux-free 20200122-2
Versions of packages linux-image-6.5.0-3-arm64 suggests:
pn debian-kernel-handbook <none>
pn linux-doc-6.5 <none>
Versions of packages linux-image-6.5.0-3-arm64 is related to:
pn firmware-amd-graphics <none>
ii firmware-atheros 20230515-3
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
pn firmware-misc-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
--- End Message ---
--- Begin Message ---
Source: linux
Source-Version: 6.6.3-1~exp1
Done: Bastian Blank <waldi@debian.org>
We believe that the bug you reported is fixed in the latest version of
linux, which is due to be installed in the Debian FTP archive.
A summary of the changes between this version and the previous one is
attached.
Thank you for reporting the bug, which will now be closed. If you
have further comments please address them to 1055069@bugs.debian.org,
and the maintainer will reopen the bug report if appropriate.
Debian distribution maintenance software
pp.
Bastian Blank <waldi@debian.org> (supplier of updated linux package)
(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing ftpmaster@ftp-master.debian.org)
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256
Format: 1.8
Date: Sat, 02 Dec 2023 20:03:34 +0100
Source: linux
Architecture: source
Version: 6.6.3-1~exp1
Distribution: experimental
Urgency: medium
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Changed-By: Bastian Blank <waldi@debian.org>
Closes: 950324 1011986 1032604 1040901 1050782 1051365 1053503 1053764 1055069 1055244
Changes:
linux (6.6.3-1~exp1) experimental; urgency=medium
.
* New upstream release: https://kernelnewbies.org/Linux_6.6
* New upstream stable update:
https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.1
https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.2
https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.3
.
[ Vincent Blut ]
* [armhf] drivers/input/keyboard: Enable KEYBOARD_TCA8418 as module
(Closes: #1050782)
* drivers/net/wwan: Enable MTK_T7XX as module (Closes: #1055244)
* drivers/video/fbdev: Disable FB_UDL on all architectures (Closes: #1011986)
.
[ Bastian Blank ]
* [powerpc,ppc64] Remove unused arch specific bootwrapper.
* Generate installer packages according to own config.
* Sign modules using an ephemeral key: (closes: #1040901)
- Set MODULE_SIG_ALL to sign all modules.
- Not longer request Secure Boot signing for modules.
- Don't trust Secure Boot key any longer.
* Sign modules and support lockdown always.
* Compress all modules:
- Set MODULE_COMPRESS_XZ.
* Drop deprecated build profile stage1. (closes: #1051365)
* Generate information for signed template package early.
* Copy installer config into signed source.
* Make it possible to run debian/rules.real without root.
* Drop linux-compiler packages and use normal compiler packages again.
* [hppa] Drop transitional meta packages after one stable release.
* Use flake8 to check Python code.
* Build linux-libc-dev as arch-all package.
* [armel/marvell] Remove unusable kernel. (closes: #950324)
* Remove architectures not existing in Debian:
- arm64ilp32
- mips64r6
- mipsn32
- mipsn32el
- mipsn32r6
- mipsn32r6el
- mipsr6
- mipsr6
- mipsr6el
- mipsr6el
- s390
- sh3
- sparc
.
[ Emanuele Rocca ]
* [arm64] Enable support for Renesas RZ/G2UL (ARCH_R9A07G043), RZ/V2L
(ARCH_R9A07G054), and RZ/V2M (ARCH_R9A09G011). (Closes: #1053503)
* [arm64] Enable SND_SOC_SC8280XP, SC_LPASSCC_8280XP, and SND_SOC_WSA883X as
modules, needed for audio support on the Lenovo X13s. (Closes: #1055069)
.
[ Salvatore Bonaccorso ]
* drivers/block: Enable BLK_DEV_UBLK as module (Closes: #1032604)
.
[ Uwe Kleine-König ]
* Enable support for TI DP83TD510 Ethernet 10Base-T1L PHY
.
[ Diederik de Haas ]
* Drop patches applied upstream:
- Drop "cpupower: Bump soname version"
* Refresh patches:
- Adjust context in "Tweak gitignore for Debian pkg-kernel using git" and
drop 'svn' from patch Subject
- Adjust context in "linux-tools: Install perf-read-vdso{,x}32 in
directory under /usr/lib"
- Adjust context in "Documentation: Drop sphinx version check"
- Adjust context in "firmware: Remove redundant log messages from drivers"
- Adjust context in "radeon, amdgpu: Firmware is required for DRM and KMS
on R600 onward"
- Adjust context in "phy/marvell: disable 4-port phys"
- Adjust context in "fs: Add MODULE_SOFTDEP declarations for hard-coded
crypto drivers"
- Adjust context in "efi: Add an EFI_SECURE_BOOT flag to indicate secure
boot mode"
- Adjust context in "trust machine keyring (MoK) by default"
- Adjust context in "ntfs: mark it as broken"
* d/config: Update with the help of kconfigeditor2:
- [x86,amd64/cloud] arch/x86: Remove MICROCODE
- init: Remove EMBEDDED
- drivers/hwmon: Remove SENSORS_SMM665
- [armhf] drivers/staging/media/imx: Merge VIDEO_IMX_CSI into
VIDEO_IMX_MEDIA
* libcpupower1: Add is_valid_path to symbols file
* d/installer: Add crc-modules to nic-shared-modules Depends
* [rt] Update to 6.6-rt15
* d/patches: Remove amdgpu part in the "radeon, amdgpu: Firmware is required
for DRM and KMS on R600 onward" and "firmware_class: Refer to Debian wiki
page when logging missing firmware" patches (Closes: #1053764)
* Improve support for rk3588 devices
- [arm64] drivers/clk/rockchip: Enable CLK_RK3588
- [arm64] drivers/nvmem: Enable NVMEM_ROCKCHIP_OTP as module
- [arm64] drivers/perf: Enable ARM_PMUV3
.
[ Alper Nebi Yasak ]
* debian/templates: Keep cpio as build-depends for nodoc build profile
* [x86] Enable modules for more ChromeOS hardware functionality:
- Enable CROS_EC_SPI, CROS_EC_I2C, CROS_EC_LPC, CROS_EC_ISHTP as modules
- Enable IIO_CROS_EC_SENSORS, IIO_CROS_EC_SENSORS_CORE, IIO_CROS_EC_BARO,
IIO_CROS_EC_ACCEL_LEGACY, IIO_CROS_EC_SENSORS_LID_ANGLE,
IIO_CROS_EC_LIGHT_PROX as modules
- Enable KEYBOARD_CROS_EC, PWM_CROS_EC, RTC_DRV_CROS_EC, CEC_CROS_EC
I2C_CROS_EC_TUNNEL, SND_SOC_CROS_EC_CODEC, CHARGER_CROS_USBPD,
CROS_USBPD_LOGGER, EXTCON_USBC_CROS_EC as modules
- Enable WILCO_EC, CHARGER_WILCO, RTC_DRV_WILCO_EC, WILCO_EC_DEBUGFS,
WILCO_EC_EVENTS, WILCO_EC_TELEMETRY as modules
- Enable CHROMEOS_PRIVACY_SCREEN, CHROMEOS_TBMC as modules
* [x86] Enable more SoC audio modules for Intel and AMD systems:
- Enable SND_SOC_AMD_ACP_COMMON, SND_SOC_AMD_RV_RT5682_MACH,
SND_DESIGNWARE_I2S, SND_SOC_AMD_SOF_MACH, SND_SOC_SOF_AMD_TOPLEVEL,
SND_SOC_SOF_AMD_REMBRANDT as modules
- Enable SND_SOC_INTEL_AVS, SND_SOC_INTEL_AVS_MACH_DA7219,
SND_SOC_INTEL_AVS_MACH_DMIC, SND_SOC_INTEL_AVS_MACH_HDAUDIO,
SND_SOC_INTEL_AVS_MACH_MAX98373, SND_SOC_INTEL_AVS_MACH_NAU8825,
SND_SOC_INTEL_AVS_MACH_SSM4567, SND_SOC_INTEL_AVS_MACH_RT5663 and
SND_SOC_INTEL_CML_LP as modules
- Enable SND_SOC_INTEL_KBL_DA7219_MAX98927_MACH,
SND_SOC_INTEL_GLK_DA7219_MAX98357A_MACH, SND_SOC_INTEL_SOF_CS42L42_MACH,
SND_SOC_INTEL_SOF_NAU8825_MACH, SND_SOC_INTEL_SOF_CML_RT1011_RT5682_MACH,
SND_SOC_INTEL_SOF_DA7219_MAX98373_MACH, SND_SOC_INTEL_SOF_SSP_AMP_MACH,
SND_SOC_INTEL_CML_LP_DA7219_MAX98357A_MACH, SND_SOC_CS35L41_I2C and
SND_SOC_NAU8315 as modules
* [x86] Enable TOUCHSCREEN_ELAN as module
* [arm64] Enable configs common to MediaTek MT8173 and MT8183 platforms:
- Enable ARCH_MEDIATEK, MTK_TIMER, MTK_CPUX_TIMER, MST_IRQ, MTK_SCPSYS,
MTK_SCPSYS_PM_DOMAINS, MTK_INFRACFG, EINT_MTK, IOMMU_IO_PGTABLE_ARMV7S
- Enable ARM_MEDIATEK_CPUFREQ, ARM_MEDIATEK_CPUFREQ_HW as built-in
- Enable SERIAL_8250_MT6577 as built-in
- Enable HW_RANDOM_MTK, MEDIATEK_WATCHDOG, ARM_MEDIATEK_CPUFREQ and
ARM_MEDIATEK_CPUFREQ_HW as modules
- Enable MTK_SMI, MTK_IOMMU, MTK_MMSYS, MTK_CMDQ, MTK_CMDQ_MBOX,
PWM_MTK_DISP, DRM_MEDIATEK, DRM_MEDIATEK_HDMI, PHY_MTK_HDMI and
PHY_MTK_MIPI_DSI as modules
- Enable VIDEO_MEDIATEK_JPEG, VIDEO_MEDIATEK_VCODEC, VIDEO_MEDIATEK_VPU,
MTK_SCP, RPMSG_MTK_SCP as modules
- Enable MEDIATEK_MT6577_AUXADC and MTK_THERMAL as modules
- Enable I2C_MT65XX, SPI_MT65XX, MFD_MT6397, RTC_DRV_MT6397, MTK_PMIC_WRAP
and MTK_REGULATOR_COUPLER as modules
- Enable MMC_MTK as module
- Enable NVMEM_MTK_EFUSE, PHY_MTK_TPHY, USB_XHCI_MTK, USB_MTU3 as modules
- Enable USB_MTU3_DUAL_ROLE, and enable USB_ROLE_SWITCH as built-in
- Enable MT7622_WMAC
- Keep SoC-specific clock and pin controller drivers disabled
* [arm64] Enable configs for MT8183 Chromebooks:
- Enable PINCTRL_MT8183
- Enable COMMON_CLK_MT8183 and its AUDIOSYS, CAMSYS, IMGSYS, IPU_CORE0,
IPU_CORE1, IPU_ADL, IPU_CONN, MFGCFG, MMSYS, VDECSYS, VENCSYS as modules
- Enable DEVFREQ_GOV_PASSIVE, ARM_MEDIATEK_CCI_DEVFREQ, MTK_SVS as modules
- Enable DRM_ANALOGIX_ANX7625, DRM_PANEL_BOE_TV101WUM_NL6 and
REGULATOR_MT6358 as modules
- Enable CROS_EC_RPMSG and VIDEO_MEDIATEK_MDP3 as modules
- Enable MT7921S and ATH10K_SDIO as modules
- Enable GENERIC_ADC_THERMAL and USB_ONBOARD_HUB as modules
- Enable SND_SOC_BT_SCO, SND_SOC_CROS_EC_CODEC, SND_SOC_TS3A227E,
SND_SOC_MT6358, SND_SOC_MT8183, SND_SOC_MT8183_DA7219_MAX98357A,
and SND_SOC_MT8183_MT6358_TS3A227E_MAX98357A as modules
* [arm64] Enable configs for MT8173 Chromebooks:
- Enable PINCTRL_MT8173 and COMMON_CLK_MEDIATEK_FHCTL
- Enable COMMON_CLK_MT8173 and its IMGSYS, MMSYS, VDECSYS, VENCSYS clocks
as modules
- Enable DRM_PARADE_PS8640, REGULATOR_DA9211, REGULATOR_MT6397,
VIDEO_MEDIATEK_MDP and TOUCHSCREEN_MELFAS_MIP4 as modules
- Enable SPI_MTK_NOR and ARM_SMC_WATCHDOG as modules
- Enable SND_SOC_MT8173 and SND_SOC_MT8173_RT5650 as modules
* [arm64] Enable more hardware for RK3399 ChromeOS tablets:
- drivers/gpu/drm/panel/Kconfig: DRM_PANEL_INNOLUX_P079ZCA as module
- drivers/gpu/drm/panel/Kconfig: DRM_PANEL_KINGDISPLAY_KD097D04 as module
- drivers/media/i2c/Kconfig: Enable VIDEO_OV2685 as module
- drivers/media/i2c/Kconfig: Enable VIDEO_OV5695 as module
- drivers/net/wireless/ath/ath10k/Kconfig: Enable ATH10K_SDIO as module
.
[ John Paul Adrian Glaubitz ]
* [ia64] Compile with gcc-12 to work around ICE (PR target/111425)
.
[ Francesco Dolcini ]
* Improve support for NXP i.MX devices
- [armhf] drivers/cpufreq/Kconfig.arm: Enable CONFIG_ARM_IMX_CPUFREQ_DT
- [armhf] sound/soc/fsl/Kconfig: Enable CONFIG_SND_SOC_FSL_ASOC_CARD
.
[ Ben Hutchings ]
* d/rules.real: Reinstate installer test build with no build profiles
* udeb: Move i2c-hid modules to fb-modules since they depend on drm
* d/rules.real: Run dh_movetousr if available
* d/rules.real: Change linux-libc-dev installation to:
- Include all generic headers enabled on any supported architecture
- Use the upstream headers_install target again
Checksums-Sha1:
4b7cecacf1c74b09096d7fb07ca06c9b61a983f2 230753 linux_6.6.3-1~exp1.dsc
8b77c06f074294297f07c339588159fc727388b2 142662368 linux_6.6.3.orig.tar.xz
ea6d2f75b201094cb5a291c2bdc837d9e857b533 1567812 linux_6.6.3-1~exp1.debian.tar.xz
236bbfcc532f8d1a1155f44431a4e0189167b2f2 5933 linux_6.6.3-1~exp1_source.buildinfo
Checksums-Sha256:
778d3544b70e3460bd15289617d890c08b14ef812bb803083d1aa8326e34f6dd 230753 linux_6.6.3-1~exp1.dsc
5ee7a9f1e137cc776832f58db0785a5ee61052c07604ce5bb7892513201330ec 142662368 linux_6.6.3.orig.tar.xz
b548c65b07ed9ebbc639bd6c014f2a863d17275661348d8b8bb8bec315d809ec 1567812 linux_6.6.3-1~exp1.debian.tar.xz
1942e0263e7219e747590643ed3c2f87d628ad9b413cc5b4aba4fa23c6e77db6 5933 linux_6.6.3-1~exp1_source.buildinfo
Files:
2f603a8816bfe365b1834373afdcd1a6 230753 kernel optional linux_6.6.3-1~exp1.dsc
2e750eb77f4ce954844cfc99c18aab4f 142662368 kernel optional linux_6.6.3.orig.tar.xz
2093d009a1cbb097afdf1db5043df9c0 1567812 kernel optional linux_6.6.3-1~exp1.debian.tar.xz
2e792b449844840ca7bb5345dfed7806 5933 kernel optional linux_6.6.3-1~exp1_source.buildinfo
-----BEGIN PGP SIGNATURE-----
iHUEARYIAB0WIQQ8pEKDNIgQDAQDOBFji0aBW7swjwUCZWuFhQAKCRBji0aBW7sw
j14vAQDiHcPXVL3UeXkmaQ/FgLHPdOiVEhibWeK4GqDDUCzQTwD/ZM90AMipnBbc
bzwJ2QuZeQVp2UQrvCjjAtKf9/Trfww=
=etIA
-----END PGP SIGNATURE-----
--- End Message ---