--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-5.10.0-14-amd64: udlfb is enabled in kernel config
- From: Jeremy Rand <jeremyrand@danwin1210.de>
- Date: Sat, 28 May 2022 06:36:51 -0500
- Message-id: <165373781137.2203.1088405801605745625.reportbug@debian>
Package: src:linux
Version: 5.10.113-1
Severity: normal
X-Debbugs-Cc: jeremyrand@danwin1210.de
Dear Maintainer,
For the reasons given in https://bugs.archlinux.org/task/56817 , I believe the CONFIG_FB_UDL option should be disabled in the Linux config in Debian.
-- Package-specific info:
** Version:
Linux version 5.10.0-14-amd64 (debian-kernel@lists.debian.org) (gcc-10 (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Debian 5.10.113-1 (2022-04-29)
** Command line:
BOOT_IMAGE=/vmlinuz-5.10.0-14-amd64 root=/dev/mapper/debian--vg-root ro quiet vsyscall=emulate
** Not tainted
** Kernel log:
[ 15.962790] systemd[1]: modprobe@fuse.service: Succeeded.
[ 15.963092] systemd[1]: Finished Load Kernel Module fuse.
[ 15.964318] systemd[1]: Mounting FUSE Control File System...
[ 15.964648] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
[ 15.967376] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 15.968085] systemd[1]: Mounted FUSE Control File System.
[ 15.969231] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 15.969272] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 15.970184] systemd[1]: Starting Load/Save Random Seed...
[ 15.971433] systemd[1]: Starting Create System Users...
[ 15.986869] systemd[1]: Finished Create System Users.
[ 15.988860] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 15.989171] lp: driver loaded but no devices found
[ 15.993680] ppdev: user-space parallel port driver
[ 15.997007] parport_pc 00:04: [io 0x0378-0x037b]
[ 15.997104] parport_pc 00:04: [irq 5]
[ 15.998388] parport_pc 00:04: activated
[ 15.998391] parport_pc 00:04: reported by Plug and Play ACPI
[ 16.000886] systemd[1]: Finished Load Kernel Modules.
[ 16.002042] systemd[1]: Starting Apply Kernel Variables...
[ 16.004266] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
[ 16.010845] systemd[1]: Finished Load/Save Random Seed.
[ 16.011063] systemd[1]: Condition check resulted in First Boot Complete being skipped.
[ 16.017422] systemd[1]: Finished Apply Kernel Variables.
[ 16.020225] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 16.020399] systemd[1]: Reached target Local File Systems (Pre).
[ 16.022186] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[ 16.042954] systemd[1]: Started Journal Service.
[ 16.051150] systemd-journald[452]: Received client request to flush runtime journal.
[ 16.243332] ACPI: AC Adapter [AC] (on-line)
[ 16.390986] input: PC Speaker as /devices/platform/pcspkr/input/input9
[ 16.391370] iTCO_vendor_support: vendor-support=0
[ 16.391781] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 16.395876] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 16.435577] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.4)
[ 16.470512] dell-smbios A80593CE-A997-11DA-B012-B622A1EF5492: WMI SMBIOS userspace interface not supported(0), try upgrading to a newer BIOS
[ 16.491726] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 16.491785] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 16.495111] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 16.514495] input: Dell WMI hotkeys as /devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input10
[ 16.566117] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 16.566121] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 16.566122] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 16.566123] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 16.568298] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 16.568541] cfg80211: Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[ 16.568772] cfg80211: Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[ 16.569383] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 16.589955] platform regulatory.0: firmware: direct-loading firmware regulatory.db
[ 16.594264] Adding 8269820k swap on /dev/mapper/debian--vg-swap_1. Priority:-2 extents:1 across:8269820k SSFS
[ 16.594942] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s
[ 16.697986] dell_laptop: Using i8042 filter function for receiving events
[ 16.752189] Intel(R) Wireless WiFi driver for Linux
[ 16.752478] iwlwifi 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 16.755386] iwlwifi 0000:02:00.0: firmware: failed to load iwlwifi-6000g2a-6.ucode (-2)
[ 16.755426] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
[ 16.755462] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-6000g2a-6.ucode failed with error -2
[ 16.755476] iwlwifi 0000:02:00.0: firmware: failed to load iwlwifi-6000g2a-5.ucode (-2)
[ 16.755509] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-6000g2a-5.ucode failed with error -2
[ 16.755510] iwlwifi 0000:02:00.0: minimum version required: iwlwifi-6000g2a-5
[ 16.755539] iwlwifi 0000:02:00.0: maximum version supported: iwlwifi-6000g2a-6
[ 16.755569] iwlwifi 0000:02:00.0: check git://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git
[ 16.760016] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 16.775229] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 16.775239] ext2 filesystem being mounted at /boot supports timestamps until 2038 (0x7fffffff)
[ 16.843083] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 16.852077] audit: type=1400 audit(1653736464.122:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=642 comm="apparmor_parser"
[ 16.852976] audit: type=1400 audit(1653736464.122:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="mariadbd_akonadi" pid=641 comm="apparmor_parser"
[ 16.858906] audit: type=1400 audit(1653736464.130:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="mysqld_akonadi" pid=643 comm="apparmor_parser"
[ 16.859237] audit: type=1400 audit(1653736464.130:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="postgresql_akonadi" pid=640 comm="apparmor_parser"
[ 16.860275] audit: type=1400 audit(1653736464.130:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="tcpdump" pid=646 comm="apparmor_parser"
[ 16.866205] audit: type=1400 audit(1653736464.134:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=650 comm="apparmor_parser"
[ 16.869286] audit: type=1400 audit(1653736464.138:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=647 comm="apparmor_parser"
[ 16.876759] audit: type=1400 audit(1653736464.146:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/akonadiserver" pid=653 comm="apparmor_parser"
[ 16.877601] audit: type=1400 audit(1653736464.146:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/ricochet" pid=652 comm="apparmor_parser"
[ 16.880482] audit: type=1400 audit(1653736464.150:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/haveged" pid=648 comm="apparmor_parser"
[ 16.906085] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD90BXX: line_outs=1 (0xe/0x0/0x0/0x0/0x0) type:line
[ 16.906090] snd_hda_codec_idt hdaudioC0D0: speaker_outs=1 (0xd/0x0/0x0/0x0/0x0)
[ 16.906092] snd_hda_codec_idt hdaudioC0D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[ 16.906094] snd_hda_codec_idt hdaudioC0D0: mono: mono_out=0x0
[ 16.906095] snd_hda_codec_idt hdaudioC0D0: inputs:
[ 16.906097] snd_hda_codec_idt hdaudioC0D0: Dock Mic=0xf
[ 16.906099] snd_hda_codec_idt hdaudioC0D0: Internal Mic=0x11
[ 16.906100] snd_hda_codec_idt hdaudioC0D0: Mic=0xa
[ 16.930543] intel_rapl_common: Found RAPL domain package
[ 16.930546] intel_rapl_common: Found RAPL domain core
[ 16.930548] intel_rapl_common: Found RAPL domain uncore
[ 16.930555] intel_rapl_common: RAPL package-0 domain package locked by BIOS
[ 17.034478] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 17.034554] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 17.034614] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 17.035276] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 17.036413] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 17.036487] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 17.036555] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 17.036622] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 20.756313] e1000e 0000:00:19.0 enp0s25: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 20.756391] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
[ 30.536228] e1000e 0000:00:19.0 enp0s25: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 30.546126] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
** Model information
sys_vendor: Dell Inc.
product_name: Latitude E6420
product_version: 01
chassis_vendor: Dell Inc.
chassis_version:
bios_vendor: Dell Inc.
bios_version: A21
board_vendor: Dell Inc.
board_name: 0P6K8J
board_version: A00
** Loaded modules:
udp_diag
tcp_diag
inet_diag
snd_hda_codec_hdmi
intel_rapl_msr
snd_hda_codec_idt
intel_rapl_common
snd_hda_codec_generic
snd_hda_intel
x86_pkg_temp_thermal
intel_powerclamp
snd_intel_dspcfg
soundwire_intel
coretemp
soundwire_generic_allocation
binfmt_misc
snd_soc_core
kvm_intel
snd_compress
soundwire_cadence
snd_hda_codec
iwlwifi
kvm
dell_rbtn
snd_hda_core
mei_wdt
mei_hdcp
irqbypass
snd_hwdep
dell_laptop
ledtrig_audio
rapl
soundwire_bus
dell_smm_hwmon
cfg80211
iTCO_wdt
dell_wmi
intel_cstate
dell_smbios
snd_pcm
joydev
dcdbas
intel_pmc_bxt
sparse_keymap
wmi_bmof
iTCO_vendor_support
dell_wmi_descriptor
pcspkr
serio_raw
intel_uncore
sg
snd_timer
watchdog
rfkill
mei_me
snd
mei
soundcore
dell_smo8800
evdev
ac
parport_pc
ppdev
lp
parport
fuse
configfs
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
btrfs
blake2b_generic
dm_crypt
dm_mod
raid10
raid456
async_raid6_recov
async_memcpy
async_pq
async_xor
async_tx
xor
raid6_pq
libcrc32c
crc32c_generic
raid1
raid0
multipath
linear
md_mod
sd_mod
sr_mod
cdrom
t10_pi
crc_t10dif
crct10dif_generic
crct10dif_pclmul
crct10dif_common
crc32_pclmul
crc32c_intel
i915
ghash_clmulni_intel
i2c_algo_bit
drm_kms_helper
cec
aesni_intel
ehci_pci
drm
ehci_hcd
e1000e
sdhci_pci
psmouse
cqhci
libaes
crypto_simd
usbcore
ahci
libahci
cryptd
glue_helper
sdhci
libata
mmc_core
ptp
i2c_i801
i2c_smbus
scsi_mod
pps_core
lpc_ich
usb_common
wmi
battery
video
button
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09)
Subsystem: Dell 2nd Generation Core Processor Family DRAM Controller [1028:0493]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
IOMMU group: 0
Capabilities: <access denied>
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0126] (rev 09) (prog-if 00 [VGA controller])
DeviceName: Onboard IGD
Subsystem: Dell 2nd Generation Core Processor Family Integrated Graphics Controller [1028:0493]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 28
IOMMU group: 1
Region 0: Memory at e1400000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 4000 [size=64]
Expansion ROM at 000c0000 [virtual] [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
Subsystem: Dell 6 Series/C200 Series Chipset Family MEI Controller [1028:0493]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 29
IOMMU group: 2
Region 0: Memory at e2eb0000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:19.0 Ethernet controller [0200]: Intel Corporation 82579LM Gigabit Network Connection (Lewisville) [8086:1502] (rev 04)
Subsystem: Dell 82579LM Gigabit Network Connection (Lewisville) [1028:0493]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 27
IOMMU group: 3
Region 0: Memory at e2e00000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at e2e80000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 4080 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
Kernel modules: e1000e
00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 04) (prog-if 20 [EHCI])
Subsystem: Dell 6 Series/C200 Series Chipset Family USB Enhanced Host Controller [1028:0493]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
IOMMU group: 4
Region 0: Memory at e2e70000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 04)
DeviceName: Onboard Audio
Subsystem: Dell 6 Series/C200 Series Chipset Family High Definition Audio Controller [1028:0493]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 30
IOMMU group: 5
Region 0: Memory at e2e60000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
IOMMU group: 6
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: [disabled]
Memory behind bridge: [disabled]
Prefetchable memory behind bridge: [disabled]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 [8086:1c12] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
IOMMU group: 7
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: [disabled]
Memory behind bridge: e2d00000-e2dfffff [size=1M]
Prefetchable memory behind bridge: [disabled]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 [8086:1c14] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
IOMMU group: 8
Bus: primary=00, secondary=03, subordinate=08, sec-latency=0
I/O behind bridge: 00003000-00003fff [size=4K]
Memory behind bridge: e2200000-e2bfffff [size=10M]
Prefetchable memory behind bridge: 00000000e0a00000-00000000e13fffff [size=10M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 [8086:1c16] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 19
IOMMU group: 9
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
I/O behind bridge: 00002000-00002fff [size=4K]
Memory behind bridge: e1800000-e21fffff [size=10M]
Prefetchable memory behind bridge: 00000000e0000000-00000000e09fffff [size=10M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 [8086:1c1a] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
IOMMU group: 10
Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=0
I/O behind bridge: [disabled]
Memory behind bridge: e2c00000-e2cfffff [size=1M]
Prefetchable memory behind bridge: [disabled]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 04) (prog-if 20 [EHCI])
Subsystem: Dell 6 Series/C200 Series Chipset Family USB Enhanced Host Controller [1028:0493]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 17
IOMMU group: 11
Region 0: Memory at e2e50000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1f.0 ISA bridge [0601]: Intel Corporation QM67 Express Chipset LPC Controller [8086:1c4f] (rev 04)
Subsystem: Dell QM67 Express Chipset LPC Controller [1028:0493]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
IOMMU group: 12
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 RAID bus controller [0104]: Intel Corporation 82801 Mobile SATA Controller [RAID mode] [8086:282a] (rev 04)
Subsystem: Dell 82801 Mobile SATA Controller [RAID mode] [1028:0493]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 26
IOMMU group: 12
Region 0: I/O ports at 40d0 [size=8]
Region 1: I/O ports at 40c0 [size=4]
Region 2: I/O ports at 40b0 [size=8]
Region 3: I/O ports at 40a0 [size=4]
Region 4: I/O ports at 4060 [size=32]
Region 5: Memory at e2e40000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 04)
Subsystem: Dell 6 Series/C200 Series Chipset Family SMBus Controller [1028:0493]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
IOMMU group: 12
Region 0: Memory at e2e30000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 4040 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
02:00.0 Network controller [0280]: Intel Corporation Centrino Advanced-N 6205 [Taylor Peak] [8086:0082] (rev 34)
Subsystem: Intel Corporation Centrino Advanced-N 6205 AGN [8086:1321]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 17
IOMMU group: 13
Region 0: Memory at e2d00000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel modules: iwlwifi
0a:00.0 SD Host controller [0805]: O2 Micro, Inc. OZ600FJ0/OZ900FJ0/OZ600FJS SD/MMC Card Reader Controller [1217:8221] (rev 05) (prog-if 01)
Subsystem: Dell OZ600FJ0/OZ900FJ0/OZ600FJS SD/MMC Card Reader Controller [1028:0493]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
IOMMU group: 14
Region 0: Memory at e2c20000 (32-bit, non-prefetchable) [size=512]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
Kernel modules: sdhci_pci
0a:00.1 Mass storage controller [0180]: O2 Micro, Inc. Device [1217:8231] (rev 03)
Subsystem: Dell Device [1028:0493]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 11
IOMMU group: 14
Region 0: Memory at e2c10000 (32-bit, non-prefetchable) [size=4K]
Region 2: Memory at e2c00000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
** USB devices:
Bus 002 Device 003: ID 0a5c:5801 Broadcom Corp. BCM5880 Secure Applications Processor with fingerprint swipe sensor
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 11.3
APT prefers stable-security
APT policy: (500, 'stable-security'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 5.10.0-14-amd64 (SMP w/4 CPU threads)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-5.10.0-14-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.140
ii kmod 28-1
ii linux-base 4.6
Versions of packages linux-image-5.10.0-14-amd64 recommends:
ii apparmor 2.13.6-10
ii firmware-linux-free 20200122-1
Versions of packages linux-image-5.10.0-14-amd64 suggests:
pn debian-kernel-handbook <none>
ii extlinux 3:6.04~git20190206.bf6db5b4+dfsg1-3+b1
ii grub-pc 2.04-20
pn linux-doc-5.10 <none>
Versions of packages linux-image-5.10.0-14-amd64 is related to:
pn firmware-amd-graphics <none>
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
pn firmware-misc-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
--- End Message ---
--- Begin Message ---
Source: linux
Source-Version: 6.6.3-1~exp1
Done: Bastian Blank <waldi@debian.org>
We believe that the bug you reported is fixed in the latest version of
linux, which is due to be installed in the Debian FTP archive.
A summary of the changes between this version and the previous one is
attached.
Thank you for reporting the bug, which will now be closed. If you
have further comments please address them to 1011986@bugs.debian.org,
and the maintainer will reopen the bug report if appropriate.
Debian distribution maintenance software
pp.
Bastian Blank <waldi@debian.org> (supplier of updated linux package)
(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing ftpmaster@ftp-master.debian.org)
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256
Format: 1.8
Date: Sat, 02 Dec 2023 20:03:34 +0100
Source: linux
Architecture: source
Version: 6.6.3-1~exp1
Distribution: experimental
Urgency: medium
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Changed-By: Bastian Blank <waldi@debian.org>
Closes: 950324 1011986 1032604 1040901 1050782 1051365 1053503 1053764 1055069 1055244
Changes:
linux (6.6.3-1~exp1) experimental; urgency=medium
.
* New upstream release: https://kernelnewbies.org/Linux_6.6
* New upstream stable update:
https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.1
https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.2
https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.3
.
[ Vincent Blut ]
* [armhf] drivers/input/keyboard: Enable KEYBOARD_TCA8418 as module
(Closes: #1050782)
* drivers/net/wwan: Enable MTK_T7XX as module (Closes: #1055244)
* drivers/video/fbdev: Disable FB_UDL on all architectures (Closes: #1011986)
.
[ Bastian Blank ]
* [powerpc,ppc64] Remove unused arch specific bootwrapper.
* Generate installer packages according to own config.
* Sign modules using an ephemeral key: (closes: #1040901)
- Set MODULE_SIG_ALL to sign all modules.
- Not longer request Secure Boot signing for modules.
- Don't trust Secure Boot key any longer.
* Sign modules and support lockdown always.
* Compress all modules:
- Set MODULE_COMPRESS_XZ.
* Drop deprecated build profile stage1. (closes: #1051365)
* Generate information for signed template package early.
* Copy installer config into signed source.
* Make it possible to run debian/rules.real without root.
* Drop linux-compiler packages and use normal compiler packages again.
* [hppa] Drop transitional meta packages after one stable release.
* Use flake8 to check Python code.
* Build linux-libc-dev as arch-all package.
* [armel/marvell] Remove unusable kernel. (closes: #950324)
* Remove architectures not existing in Debian:
- arm64ilp32
- mips64r6
- mipsn32
- mipsn32el
- mipsn32r6
- mipsn32r6el
- mipsr6
- mipsr6
- mipsr6el
- mipsr6el
- s390
- sh3
- sparc
.
[ Emanuele Rocca ]
* [arm64] Enable support for Renesas RZ/G2UL (ARCH_R9A07G043), RZ/V2L
(ARCH_R9A07G054), and RZ/V2M (ARCH_R9A09G011). (Closes: #1053503)
* [arm64] Enable SND_SOC_SC8280XP, SC_LPASSCC_8280XP, and SND_SOC_WSA883X as
modules, needed for audio support on the Lenovo X13s. (Closes: #1055069)
.
[ Salvatore Bonaccorso ]
* drivers/block: Enable BLK_DEV_UBLK as module (Closes: #1032604)
.
[ Uwe Kleine-König ]
* Enable support for TI DP83TD510 Ethernet 10Base-T1L PHY
.
[ Diederik de Haas ]
* Drop patches applied upstream:
- Drop "cpupower: Bump soname version"
* Refresh patches:
- Adjust context in "Tweak gitignore for Debian pkg-kernel using git" and
drop 'svn' from patch Subject
- Adjust context in "linux-tools: Install perf-read-vdso{,x}32 in
directory under /usr/lib"
- Adjust context in "Documentation: Drop sphinx version check"
- Adjust context in "firmware: Remove redundant log messages from drivers"
- Adjust context in "radeon, amdgpu: Firmware is required for DRM and KMS
on R600 onward"
- Adjust context in "phy/marvell: disable 4-port phys"
- Adjust context in "fs: Add MODULE_SOFTDEP declarations for hard-coded
crypto drivers"
- Adjust context in "efi: Add an EFI_SECURE_BOOT flag to indicate secure
boot mode"
- Adjust context in "trust machine keyring (MoK) by default"
- Adjust context in "ntfs: mark it as broken"
* d/config: Update with the help of kconfigeditor2:
- [x86,amd64/cloud] arch/x86: Remove MICROCODE
- init: Remove EMBEDDED
- drivers/hwmon: Remove SENSORS_SMM665
- [armhf] drivers/staging/media/imx: Merge VIDEO_IMX_CSI into
VIDEO_IMX_MEDIA
* libcpupower1: Add is_valid_path to symbols file
* d/installer: Add crc-modules to nic-shared-modules Depends
* [rt] Update to 6.6-rt15
* d/patches: Remove amdgpu part in the "radeon, amdgpu: Firmware is required
for DRM and KMS on R600 onward" and "firmware_class: Refer to Debian wiki
page when logging missing firmware" patches (Closes: #1053764)
* Improve support for rk3588 devices
- [arm64] drivers/clk/rockchip: Enable CLK_RK3588
- [arm64] drivers/nvmem: Enable NVMEM_ROCKCHIP_OTP as module
- [arm64] drivers/perf: Enable ARM_PMUV3
.
[ Alper Nebi Yasak ]
* debian/templates: Keep cpio as build-depends for nodoc build profile
* [x86] Enable modules for more ChromeOS hardware functionality:
- Enable CROS_EC_SPI, CROS_EC_I2C, CROS_EC_LPC, CROS_EC_ISHTP as modules
- Enable IIO_CROS_EC_SENSORS, IIO_CROS_EC_SENSORS_CORE, IIO_CROS_EC_BARO,
IIO_CROS_EC_ACCEL_LEGACY, IIO_CROS_EC_SENSORS_LID_ANGLE,
IIO_CROS_EC_LIGHT_PROX as modules
- Enable KEYBOARD_CROS_EC, PWM_CROS_EC, RTC_DRV_CROS_EC, CEC_CROS_EC
I2C_CROS_EC_TUNNEL, SND_SOC_CROS_EC_CODEC, CHARGER_CROS_USBPD,
CROS_USBPD_LOGGER, EXTCON_USBC_CROS_EC as modules
- Enable WILCO_EC, CHARGER_WILCO, RTC_DRV_WILCO_EC, WILCO_EC_DEBUGFS,
WILCO_EC_EVENTS, WILCO_EC_TELEMETRY as modules
- Enable CHROMEOS_PRIVACY_SCREEN, CHROMEOS_TBMC as modules
* [x86] Enable more SoC audio modules for Intel and AMD systems:
- Enable SND_SOC_AMD_ACP_COMMON, SND_SOC_AMD_RV_RT5682_MACH,
SND_DESIGNWARE_I2S, SND_SOC_AMD_SOF_MACH, SND_SOC_SOF_AMD_TOPLEVEL,
SND_SOC_SOF_AMD_REMBRANDT as modules
- Enable SND_SOC_INTEL_AVS, SND_SOC_INTEL_AVS_MACH_DA7219,
SND_SOC_INTEL_AVS_MACH_DMIC, SND_SOC_INTEL_AVS_MACH_HDAUDIO,
SND_SOC_INTEL_AVS_MACH_MAX98373, SND_SOC_INTEL_AVS_MACH_NAU8825,
SND_SOC_INTEL_AVS_MACH_SSM4567, SND_SOC_INTEL_AVS_MACH_RT5663 and
SND_SOC_INTEL_CML_LP as modules
- Enable SND_SOC_INTEL_KBL_DA7219_MAX98927_MACH,
SND_SOC_INTEL_GLK_DA7219_MAX98357A_MACH, SND_SOC_INTEL_SOF_CS42L42_MACH,
SND_SOC_INTEL_SOF_NAU8825_MACH, SND_SOC_INTEL_SOF_CML_RT1011_RT5682_MACH,
SND_SOC_INTEL_SOF_DA7219_MAX98373_MACH, SND_SOC_INTEL_SOF_SSP_AMP_MACH,
SND_SOC_INTEL_CML_LP_DA7219_MAX98357A_MACH, SND_SOC_CS35L41_I2C and
SND_SOC_NAU8315 as modules
* [x86] Enable TOUCHSCREEN_ELAN as module
* [arm64] Enable configs common to MediaTek MT8173 and MT8183 platforms:
- Enable ARCH_MEDIATEK, MTK_TIMER, MTK_CPUX_TIMER, MST_IRQ, MTK_SCPSYS,
MTK_SCPSYS_PM_DOMAINS, MTK_INFRACFG, EINT_MTK, IOMMU_IO_PGTABLE_ARMV7S
- Enable ARM_MEDIATEK_CPUFREQ, ARM_MEDIATEK_CPUFREQ_HW as built-in
- Enable SERIAL_8250_MT6577 as built-in
- Enable HW_RANDOM_MTK, MEDIATEK_WATCHDOG, ARM_MEDIATEK_CPUFREQ and
ARM_MEDIATEK_CPUFREQ_HW as modules
- Enable MTK_SMI, MTK_IOMMU, MTK_MMSYS, MTK_CMDQ, MTK_CMDQ_MBOX,
PWM_MTK_DISP, DRM_MEDIATEK, DRM_MEDIATEK_HDMI, PHY_MTK_HDMI and
PHY_MTK_MIPI_DSI as modules
- Enable VIDEO_MEDIATEK_JPEG, VIDEO_MEDIATEK_VCODEC, VIDEO_MEDIATEK_VPU,
MTK_SCP, RPMSG_MTK_SCP as modules
- Enable MEDIATEK_MT6577_AUXADC and MTK_THERMAL as modules
- Enable I2C_MT65XX, SPI_MT65XX, MFD_MT6397, RTC_DRV_MT6397, MTK_PMIC_WRAP
and MTK_REGULATOR_COUPLER as modules
- Enable MMC_MTK as module
- Enable NVMEM_MTK_EFUSE, PHY_MTK_TPHY, USB_XHCI_MTK, USB_MTU3 as modules
- Enable USB_MTU3_DUAL_ROLE, and enable USB_ROLE_SWITCH as built-in
- Enable MT7622_WMAC
- Keep SoC-specific clock and pin controller drivers disabled
* [arm64] Enable configs for MT8183 Chromebooks:
- Enable PINCTRL_MT8183
- Enable COMMON_CLK_MT8183 and its AUDIOSYS, CAMSYS, IMGSYS, IPU_CORE0,
IPU_CORE1, IPU_ADL, IPU_CONN, MFGCFG, MMSYS, VDECSYS, VENCSYS as modules
- Enable DEVFREQ_GOV_PASSIVE, ARM_MEDIATEK_CCI_DEVFREQ, MTK_SVS as modules
- Enable DRM_ANALOGIX_ANX7625, DRM_PANEL_BOE_TV101WUM_NL6 and
REGULATOR_MT6358 as modules
- Enable CROS_EC_RPMSG and VIDEO_MEDIATEK_MDP3 as modules
- Enable MT7921S and ATH10K_SDIO as modules
- Enable GENERIC_ADC_THERMAL and USB_ONBOARD_HUB as modules
- Enable SND_SOC_BT_SCO, SND_SOC_CROS_EC_CODEC, SND_SOC_TS3A227E,
SND_SOC_MT6358, SND_SOC_MT8183, SND_SOC_MT8183_DA7219_MAX98357A,
and SND_SOC_MT8183_MT6358_TS3A227E_MAX98357A as modules
* [arm64] Enable configs for MT8173 Chromebooks:
- Enable PINCTRL_MT8173 and COMMON_CLK_MEDIATEK_FHCTL
- Enable COMMON_CLK_MT8173 and its IMGSYS, MMSYS, VDECSYS, VENCSYS clocks
as modules
- Enable DRM_PARADE_PS8640, REGULATOR_DA9211, REGULATOR_MT6397,
VIDEO_MEDIATEK_MDP and TOUCHSCREEN_MELFAS_MIP4 as modules
- Enable SPI_MTK_NOR and ARM_SMC_WATCHDOG as modules
- Enable SND_SOC_MT8173 and SND_SOC_MT8173_RT5650 as modules
* [arm64] Enable more hardware for RK3399 ChromeOS tablets:
- drivers/gpu/drm/panel/Kconfig: DRM_PANEL_INNOLUX_P079ZCA as module
- drivers/gpu/drm/panel/Kconfig: DRM_PANEL_KINGDISPLAY_KD097D04 as module
- drivers/media/i2c/Kconfig: Enable VIDEO_OV2685 as module
- drivers/media/i2c/Kconfig: Enable VIDEO_OV5695 as module
- drivers/net/wireless/ath/ath10k/Kconfig: Enable ATH10K_SDIO as module
.
[ John Paul Adrian Glaubitz ]
* [ia64] Compile with gcc-12 to work around ICE (PR target/111425)
.
[ Francesco Dolcini ]
* Improve support for NXP i.MX devices
- [armhf] drivers/cpufreq/Kconfig.arm: Enable CONFIG_ARM_IMX_CPUFREQ_DT
- [armhf] sound/soc/fsl/Kconfig: Enable CONFIG_SND_SOC_FSL_ASOC_CARD
.
[ Ben Hutchings ]
* d/rules.real: Reinstate installer test build with no build profiles
* udeb: Move i2c-hid modules to fb-modules since they depend on drm
* d/rules.real: Run dh_movetousr if available
* d/rules.real: Change linux-libc-dev installation to:
- Include all generic headers enabled on any supported architecture
- Use the upstream headers_install target again
Checksums-Sha1:
4b7cecacf1c74b09096d7fb07ca06c9b61a983f2 230753 linux_6.6.3-1~exp1.dsc
8b77c06f074294297f07c339588159fc727388b2 142662368 linux_6.6.3.orig.tar.xz
ea6d2f75b201094cb5a291c2bdc837d9e857b533 1567812 linux_6.6.3-1~exp1.debian.tar.xz
236bbfcc532f8d1a1155f44431a4e0189167b2f2 5933 linux_6.6.3-1~exp1_source.buildinfo
Checksums-Sha256:
778d3544b70e3460bd15289617d890c08b14ef812bb803083d1aa8326e34f6dd 230753 linux_6.6.3-1~exp1.dsc
5ee7a9f1e137cc776832f58db0785a5ee61052c07604ce5bb7892513201330ec 142662368 linux_6.6.3.orig.tar.xz
b548c65b07ed9ebbc639bd6c014f2a863d17275661348d8b8bb8bec315d809ec 1567812 linux_6.6.3-1~exp1.debian.tar.xz
1942e0263e7219e747590643ed3c2f87d628ad9b413cc5b4aba4fa23c6e77db6 5933 linux_6.6.3-1~exp1_source.buildinfo
Files:
2f603a8816bfe365b1834373afdcd1a6 230753 kernel optional linux_6.6.3-1~exp1.dsc
2e750eb77f4ce954844cfc99c18aab4f 142662368 kernel optional linux_6.6.3.orig.tar.xz
2093d009a1cbb097afdf1db5043df9c0 1567812 kernel optional linux_6.6.3-1~exp1.debian.tar.xz
2e792b449844840ca7bb5345dfed7806 5933 kernel optional linux_6.6.3-1~exp1_source.buildinfo
-----BEGIN PGP SIGNATURE-----
iHUEARYIAB0WIQQ8pEKDNIgQDAQDOBFji0aBW7swjwUCZWuFhQAKCRBji0aBW7sw
j14vAQDiHcPXVL3UeXkmaQ/FgLHPdOiVEhibWeK4GqDDUCzQTwD/ZM90AMipnBbc
bzwJ2QuZeQVp2UQrvCjjAtKf9/Trfww=
=etIA
-----END PGP SIGNATURE-----
--- End Message ---