Bug#1025735: linux-image-6.0.0-5-amd64: Logitech camera only uses USB 1.1 (Full speed), not enough bandwidth
Package: src:linux
Version: 6.0.10-2
Severity: important
Dear Maintainer,
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation?
My Logitech Inc. QuickCam Communicate STX USB Webcam 046d:08d7 can't
use USB 2.0, although the manufacturer says it supports it. It is not
a hardware problem, I have the same camera 2 times and I tried
different port and computers. It even happens on different machines.
The port definitely supports USB 2.0, I have verified that with
another USB device.
That causes that the bandwidth is not enough for the higher
resolutions. This results in a faulty image in certain applications
like Firefox or Microsoft Edge.
Message in dmesg
[ 193.679885] gspca_main: gspca_zc3xx-2.14.0 probing 046d:08d7
[ 194.761490] input: gspca_zc3xx as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/input/input17
[ 194.761984] usbcore: registered new interface driver gspca_zc3xx
[ 195.504579] usbcore: registered new interface driver snd-usb-audio
[ 668.959675] gspca_zc3xx 1-1.5:1.0: alt 6 - bandwidth not wide enough, trying again
##After I connected the camera
[ 3752.435797] usb 1-1.5: new full-speed USB device number 7 using ehci-pci
* What exactly did you do (or not do) that was effective (or
ineffective)?
Ineffective: Use another USB port, use another camera (same model) on the same machine
* What was the outcome of this action?
Same situation, camera only uses USB 1.1. Picture disturbed, camera not usable with high resolution.
* What outcome did you expect instead?
The camera should use USB 2.0 to provide enough bandwidth.
*** End of the template - remove these template lines ***
-- Package-specific info:
** Version:
Linux version 6.0.0-5-amd64 (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-9) 12.2.0, GNU ld (GNU Binutils for Debian) 2.39) #1 SMP PREEMPT_DYNAMIC Debian 6.0.10-1 (2022-11-26)
** Command line:
BOOT_IMAGE=/vmlinuz-6.0.0-5-amd64 root=UUID=7f90848d-f699-427b-a2ab-985f37001ee1 ro
** Tainted: OE (12288)
* externally-built ("out-of-tree") module was loaded
* unsigned module was loaded
** Kernel log:
[ 184.833843] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root).
[ 184.837297] systemd[1]: Starting Journal Service...
[ 184.907298] fuse: init (API version 7.36)
[ 184.988373] systemd[1]: Starting Load Kernel Modules...
[ 184.990394] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 184.990751] systemd[1]: Repartition Root Disk was skipped because no trigger condition checks were met.
[ 184.992013] systemd[1]: Starting Coldplug All udev Devices...
[ 184.995366] systemd[1]: Started Journal Service.
[ 185.106308] EXT4-fs (dm-0): re-mounted. Quota mode: none.
[ 185.359611] systemd-journald[488]: Received client request to flush runtime journal.
[ 185.526550] lp: driver loaded but no devices found
[ 185.561658] ppdev: user-space parallel port driver
[ 191.939072] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 191.939864] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 191.940148] sr 2:0:0:0: Attached scsi generic sg2 type 5
[ 191.940410] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 191.950839] at24 0-0050: supply vcc not found, using dummy regulator
[ 191.951561] at24 0-0050: 256 byte spd EEPROM, read-only
[ 191.951694] at24 0-0051: supply vcc not found, using dummy regulator
[ 191.952404] at24 0-0051: 256 byte spd EEPROM, read-only
[ 191.952558] at24 0-0052: supply vcc not found, using dummy regulator
[ 191.953839] at24 0-0052: 256 byte spd EEPROM, read-only
[ 191.954006] at24 0-0053: supply vcc not found, using dummy regulator
[ 191.955293] at24 0-0053: 256 byte spd EEPROM, read-only
[ 192.052397] iTCO_vendor_support: vendor-support=0
[ 192.100384] input: PC Speaker as /devices/platform/pcspkr/input/input10
[ 192.337184] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 192.337300] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 192.337622] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 192.338363] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 192.363978] iTCO_wdt iTCO_wdt.1.auto: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 192.364289] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0)
[ 192.541131] input: HP WMI hotkeys as /devices/virtual/input/input11
[ 193.314923] mc: Linux media interface: v0.10
[ 193.316580] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 193.483036] videodev: Linux video capture interface: v2.00
[ 193.529810] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC662 rev1: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 193.529964] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 193.530392] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 193.531255] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 193.532140] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 193.532944] snd_hda_codec_realtek hdaudioC0D0: Mic=0x19
[ 193.533767] snd_hda_codec_realtek hdaudioC0D0: Line=0x18
[ 193.566072] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 193.566335] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 193.566648] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 193.570512] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 193.571826] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 193.629763] intel_rapl_common: Found RAPL domain package
[ 193.629956] intel_rapl_common: Found RAPL domain core
[ 193.630296] intel_rapl_common: Found RAPL domain uncore
[ 193.631125] intel_rapl_common: RAPL package-0 domain package locked by BIOS
[ 193.641483] gspca_main: v2.14.0 registered
[ 193.679885] gspca_main: gspca_zc3xx-2.14.0 probing 046d:08d7
[ 194.761490] input: gspca_zc3xx as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/input/input17
[ 194.761984] usbcore: registered new interface driver gspca_zc3xx
[ 194.797242] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none.
[ 195.504579] usbcore: registered new interface driver snd-usb-audio
[ 195.876173] audit: type=1400 audit(1670484550.566:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oosplash" pid=695 comm="apparmor_parser"
[ 195.917490] audit: type=1400 audit(1670484550.606:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=691 comm="apparmor_parser"
[ 195.918247] audit: type=1400 audit(1670484550.606:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=693 comm="apparmor_parser"
[ 195.920102] audit: type=1400 audit(1670484550.606:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=693 comm="apparmor_parser"
[ 195.922000] audit: type=1400 audit(1670484550.606:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=693 comm="apparmor_parser"
[ 195.924037] audit: type=1400 audit(1670484550.606:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=692 comm="apparmor_parser"
[ 195.926195] audit: type=1400 audit(1670484550.606:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=692 comm="apparmor_parser"
[ 195.994732] audit: type=1400 audit(1670484550.682:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="virt-aa-helper" pid=703 comm="apparmor_parser"
[ 196.060401] audit: type=1400 audit(1670484550.750:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=702 comm="apparmor_parser"
[ 196.061686] audit: type=1400 audit(1670484550.750:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=700 comm="apparmor_parser"
[ 202.589867] NET: Registered PF_QIPCRTR protocol family
[ 203.472021] kauditd_printk_skb: 7 callbacks suppressed
[ 203.472028] audit: type=1400 audit(1670484558.158:19): apparmor="DENIED" operation="capable" profile="/usr/sbin/cupsd" pid=868 comm="cupsd" capability=12 capname="net_admin"
[ 206.686144] e1000e 0000:00:19.0 eno1: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 206.686213] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[ 208.619917] L1TF CPU bug present and SMT on, data leak possible. See CVE-2018-3646 and https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/l1tf.html for details.
[ 208.753990] vboxdrv: loading out-of-tree module taints kernel.
[ 208.754279] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[ 208.781042] vboxdrv: Found 4 processor cores/threads
[ 208.800330] vboxdrv: TSC mode is Invariant, tentative frequency 3092960953 Hz
[ 208.800338] vboxdrv: Successfully loaded version 7.0.4_Debian r154605 (interface 0x00330004)
[ 208.893977] VBoxNetFlt: Successfully started.
[ 208.967138] VBoxNetAdp: Successfully started.
[ 226.352901] systemd-journald[488]: Time jumped backwards, rotating.
[ 440.601689] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Quota mode: none.
[ 550.964460] EXT4-fs (dm-1): unmounting filesystem.
[ 668.959675] gspca_zc3xx 1-1.5:1.0: alt 6 - bandwidth not wide enough, trying again
[ 671.563672] gspca_zc3xx 1-1.5:1.0: alt 5 - bandwidth not wide enough, trying again
[ 674.271815] gspca_zc3xx 1-1.5:1.0: alt 4 - bandwidth not wide enough, trying again
[ 1637.590480] gspca_zc3xx 1-1.5:1.0: alt 6 - bandwidth not wide enough, trying again
[ 1640.206783] gspca_zc3xx 1-1.5:1.0: alt 5 - bandwidth not wide enough, trying again
[ 1642.806460] gspca_zc3xx 1-1.5:1.0: alt 4 - bandwidth not wide enough, trying again
[ 1691.052272] systemd[1]: systemd 252.2-2 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[ 1691.052457] systemd[1]: Detected architecture x86-64.
[ 1691.347260] systemd-journald[488]: Received SIGTERM from PID 1 (systemd).
[ 1691.348373] systemd[1]: Stopping Journal Service...
[ 1691.444888] systemd[1]: fstrim.service: Deactivated successfully.
[ 1691.445101] systemd[1]: Finished Discard unused blocks on filesystems from /etc/fstab.
[ 1691.628486] systemd[1]: systemd-journald.service: Deactivated successfully.
[ 1691.628676] systemd[1]: Stopped Journal Service.
[ 1691.653876] systemd[1]: Starting Journal Service...
[ 1691.689523] systemd[1]: Started Journal Service.
** Model information
sys_vendor: Hewlett-Packard
product_name: HP Compaq 8200 Elite CMT PC
product_version:
chassis_vendor: Hewlett-Packard
chassis_version:
bios_vendor: Hewlett-Packard
bios_version: J01 v02.33
board_vendor: Hewlett-Packard
board_name: 1494
board_version:
** Loaded modules:
vboxnetadp(OE)
vboxnetflt(OE)
vboxdrv(OE)
sha512_ssse3
sha512_generic
qrtr
binfmt_misc
gspca_zc3xx
gspca_main
intel_rapl_msr
intel_rapl_common
videobuf2_vmalloc
videobuf2_memops
snd_hda_codec_hdmi
videobuf2_v4l2
snd_usb_audio
snd_hda_codec_realtek
snd_hda_codec_generic
videobuf2_common
videodev
snd_usbmidi_lib
ledtrig_audio
snd_rawmidi
snd_seq_device
snd_hda_intel
mc
snd_intel_dspcfg
x86_pkg_temp_thermal
snd_intel_sdw_acpi
intel_powerclamp
snd_hda_codec
coretemp
joydev
snd_hda_core
snd_hwdep
kvm_intel
kvm
snd_pcm
hp_wmi
mei_wdt
irqbypass
snd_timer
iTCO_wdt
wmi_bmof
platform_profile
rapl
sparse_keymap
intel_cstate
intel_uncore
mei_hdcp
snd
rfkill
intel_pmc_bxt
serio_raw
soundcore
pcspkr
iTCO_vendor_support
at24
mei_me
sg
evdev
mei
watchdog
tpm_infineon
parport_pc
ppdev
lp
parport
efi_pstore
fuse
configfs
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
crypto_simd
xts
ecb
hid_plantronics
dm_crypt
dm_mod
raid10
raid456
async_raid6_recov
async_memcpy
async_pq
async_xor
async_tx
xor
raid6_pq
libcrc32c
crc32c_generic
raid1
multipath
linear
hid_generic
usbhid
hid
raid0
md_mod
sd_mod
t10_pi
crc64_rocksoft_generic
sr_mod
cdrom
crc64_rocksoft
crc_t10dif
crct10dif_generic
crc64
i915
nouveau
mxm_wmi
video
drm_buddy
i2c_algo_bit
drm_display_helper
crct10dif_pclmul
crct10dif_common
crc32_pclmul
cec
ahci
crc32c_intel
rc_core
libahci
drm_ttm_helper
ttm
libata
drm_kms_helper
psmouse
scsi_mod
ehci_pci
ehci_hcd
drm
ghash_clmulni_intel
e1000e
i2c_i801
i2c_smbus
usbcore
cryptd
scsi_common
lpc_ich
ptp
pps_core
usb_common
wmi
button
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0100] (rev 09)
Subsystem: Hewlett-Packard Company 2nd Generation Core Processor Family DRAM Controller [103c:1494]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: snb_uncore
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0101] (rev 09) (prog-if 00 [Normal decode])
Subsystem: Hewlett-Packard Company Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [103c:1494]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 24
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: [disabled] [16-bit]
Memory behind bridge: f8000000-faffffff [size=48M] [32-bit]
Prefetchable memory behind bridge: d0000000-dfffffff [size=256M] [32-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:02.0 Display controller [0380]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0102] (rev 09)
DeviceName: Onboard IGD
Subsystem: Hewlett-Packard Company 2nd Generation Core Processor Family Integrated Graphics Controller [103c:1494]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 32
Region 0: Memory at fb000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
Subsystem: Hewlett-Packard Company 6 Series/C200 Series Chipset Family MEI Controller [103c:1494]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 33
Region 0: Memory at fb42a000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:16.3 Serial controller [0700]: Intel Corporation 6 Series/C200 Series Chipset Family KT Controller [8086:1c3d] (rev 04) (prog-if 02 [16550])
Subsystem: Hewlett-Packard Company 6 Series/C200 Series Chipset Family KT Controller [103c:1494]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at f0e0 [size=8]
Region 1: Memory at fb429000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: serial
00:19.0 Ethernet controller [0200]: Intel Corporation 82579LM Gigabit Network Connection (Lewisville) [8086:1502] (rev 04)
DeviceName: Onboard LAN
Subsystem: Hewlett-Packard Company 82579LM Gigabit Network Connection (Lewisville) [103c:1494]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 29
Region 0: Memory at fb400000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at fb428000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at f080 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
Kernel modules: e1000e
00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 04) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company 6 Series/C200 Series Chipset Family USB Enhanced Host Controller [103c:1494]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fb427000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 04)
Subsystem: Hewlett-Packard Company 6 Series/C200 Series Chipset Family High Definition Audio Controller [103c:1494]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 34
Region 0: Memory at fb420000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b4) (prog-if 00 [Normal decode])
Subsystem: Hewlett-Packard Company 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [103c:1494]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 25
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: [disabled] [16-bit]
Memory behind bridge: [disabled] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 [8086:1c18] (rev b4) (prog-if 00 [Normal decode])
Subsystem: Hewlett-Packard Company 6 Series/C200 Series Chipset Family PCI Express Root Port 5 [103c:1494]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 26
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: [disabled] [16-bit]
Memory behind bridge: [disabled] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.6 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 7 [8086:1c1c] (rev b4) (prog-if 00 [Normal decode])
Subsystem: Hewlett-Packard Company 6 Series/C200 Series Chipset Family PCI Express Root Port 7 [103c:1494]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 27
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: [disabled] [16-bit]
Memory behind bridge: [disabled] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.7 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 [8086:1c1e] (rev b4) (prog-if 00 [Normal decode])
Subsystem: Hewlett-Packard Company 6 Series/C200 Series Chipset Family PCI Express Root Port 8 [103c:1494]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 28
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: [disabled] [16-bit]
Memory behind bridge: [disabled] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 04) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company 6 Series/C200 Series Chipset Family USB Enhanced Host Controller [103c:1494]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fb426000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev a4) (prog-if 01 [Subtractive decode])
Subsystem: Hewlett-Packard Company 82801 PCI Bridge [103c:1494]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=06, subordinate=06, sec-latency=32
I/O behind bridge: [disabled] [16-bit]
Memory behind bridge: [disabled] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation Q67 Express Chipset LPC Controller [8086:1c4e] (rev 04)
Subsystem: Hewlett-Packard Company Q67 Express Chipset LPC Controller [103c:1494]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port Desktop SATA AHCI Controller [8086:1c02] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company 6 Series/C200 Series Chipset Family 6 port Desktop SATA AHCI Controller [103c:1494]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 30
Region 0: I/O ports at f0d0 [size=8]
Region 1: I/O ports at f0c0 [size=4]
Region 2: I/O ports at f0b0 [size=8]
Region 3: I/O ports at f0a0 [size=4]
Region 4: I/O ports at f060 [size=32]
Region 5: Memory at fb425000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 04)
Subsystem: Hewlett-Packard Company 6 Series/C200 Series Chipset Family SMBus Controller [103c:1494]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fb424000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation NV44 [GeForce 6200 TurboCache] [10de:0161] (rev a1) (prog-if 00 [VGA controller])
Subsystem: LeadTek Research Inc. NV44 [GeForce 6200 TurboCache] [107d:56c4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 31
Region 0: Memory at f9000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at f8000000 (64-bit, non-prefetchable) [size=16M]
Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nouveau
Kernel modules: nouveau
** USB devices:
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 005: ID 047f:4315 Plantronics, Inc. Poly Blackwire 8225 Series
Bus 001 Device 004: ID 046d:08d7 Logitech, Inc. QuickCam Communicate STX
Bus 001 Device 003: ID 13ba:0018 PCPlay Barcode PCP-BCG4209
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: bookworm/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 6.0.0-5-amd64 (SMP w/4 CPU threads; PREEMPT)
Kernel taint flags: TAINT_OOT_MODULE, TAINT_UNSIGNED_MODULE
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-6.0.0-5-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.142
ii kmod 30+20220905-1
ii linux-base 4.9
Versions of packages linux-image-6.0.0-5-amd64 recommends:
pn apparmor <none>
ii firmware-linux-free 20200122-1
Versions of packages linux-image-6.0.0-5-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.06-7
pn linux-doc-6.0 <none>
Versions of packages linux-image-6.0.0-5-amd64 is related to:
pn firmware-amd-graphics <none>
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
ii firmware-misc-nonfree 20221109-4
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
Reply to: