--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-4.19.0-6-amd64: bnx2x driver fails in DMAE, renders server unusable
- From: Adam Thompson <athompso@athompso.net>
- Date: Sun, 26 Jan 2020 16:33:46 -0600
- Message-id: <158007802624.7907.13516110242263402810.reportbug@muug.ca>
Package: src:linux
Version: 4.19.67-2+deb10u2
Severity: critical
Tags: upstream
Justification: breaks the whole system
Dear Maintainer,
* What led up to the situation?
Upgraded Debian from 9 to 10.
* What exactly did you do (or not do) that was effective (or
ineffective)?
Have tried various module options, also have tried not using bonding.
* What was the outcome of this action?
Driver soft-lockup, causing overall system instability and unusability.
* What outcome did you expect instead?
Driver should work with existing harware.
Actual failure looks like this in dmesg:
syslog:Jan 26 15:49:50 muug kernel: [734667.232433] bnx2x: [bnx2x_write_dmae:597(enp3s0f1)]DMAE returned failure -1
syslog:Jan 26 15:49:50 muug kernel: [734667.432133] bnx2x: [bnx2x_issue_dmae_with_comp:549(enp3s0f1)]DMAE timeout!
syslog:Jan 26 15:49:50 muug kernel: [734667.432525] bnx2x: [bnx2x_write_dmae:597(enp3s0f1)]DMAE returned failure -1
syslog:Jan 26 15:49:50 muug kernel: [734667.632114] bnx2x: [bnx2x_issue_dmae_with_comp:549(enp3s0f1)]DMAE timeout!
syslog:Jan 26 15:51:52 muug kernel: [ 1.358268] bnx2x: QLogic 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.712.30-0 (2014/02/10)
syslog:Jan 26 15:51:52 muug kernel: [ 1.358322] bnx2x 0000:03:00.0: msix capability found
syslog:Jan 26 15:51:52 muug kernel: [ 1.358541] bnx2x 0000:03:00.0: part number 394D4342-34383735-30345430-473030
syslog:Jan 26 15:51:52 muug kernel: [ 1.459205] bnx2x 0000:03:00.0: 31.504 Gb/s available PCIe bandwidth, limited by 8 GT/s x4 link at 0000:00:01.2 (capable of 63.008 Gb/s with 8 GT/s x8 link)
syslog:Jan 26 15:51:52 muug kernel: [ 1.459303] bnx2x 0000:03:00.1: msix capability found
syslog:Jan 26 15:51:52 muug kernel: [ 1.459477] bnx2x 0000:03:00.1: part number 394D4342-34383735-30345430-473030
syslog:Jan 26 15:51:52 muug kernel: [ 1.502898] bnx2x 0000:03:00.1: 31.504 Gb/s available PCIe bandwidth, limited by 8 GT/s x4 link at 0000:00:01.2 (capable of 63.008 Gb/s with 8 GT/s x8 link)
syslog:Jan 26 15:51:52 muug kernel: [ 1.503800] bnx2x 0000:03:00.1 enp3s0f1: renamed from eth1
syslog:Jan 26 15:51:52 muug kernel: [ 1.554228] bnx2x 0000:03:00.0 enp3s0f0: renamed from eth0
except that there are thousands of bnx2x error messages. Those interfaces cannot pass traffic. The interrupt storm or dmesg flood or something also renders the system unusable even through unaffected interfaces.
These interfaces worked fine in Debian 9 mid-way through its lifecycle, but the current packages failed. I opted to try upgrading to 10, but this still fails in Debian 10. (I don't know the version of the last unaffected kernel, sorry - we were way behind by accident, and jumped a year+ in kernel versions.)
I've found multiple issues around the 'net relating to this, all noting essentially the same behaviour.
A regular "reboot" is inadequate to reboot (within 24hrs, anyway), I have to issue a "reboot -f".
-- Package-specific info:
** Version:
Linux version 4.19.0-6-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.67-2+deb10u2 (2019-11-11)
** Command line:
BOOT_IMAGE=/vmlinuz-4.19.0-6-amd64 root=UUID=3142d5ea-ae76-4a19-b49d-5e5b16c796e6 ro quiet
** Tainted: POE (12289)
* Proprietary module has been loaded.
* Out-of-tree module has been loaded.
* Unsigned module has been loaded.
** Kernel log:
[ 12.859416] RPC: Registered tcp transport module.
[ 12.859417] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 12.898428] EXT4-fs (md1): re-mounted. Opts: discard,user_xattr,errors=remount-ro
[ 12.961213] systemd-journald[428]: Received request to flush runtime journal from PID 1
[ 12.998981] IPMI System Interface driver.
[ 12.999000] ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS
[ 12.999002] ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
[ 12.999003] ipmi_si: Adding SMBIOS-specified kcs state machine
[ 12.999022] ipmi_si IPI0001:00: ipmi_platform: probing via ACPI
[ 12.999044] ipmi_si IPI0001:00: [io 0x0ca2] regsize 1 spacing 1 irq 0
[ 12.999045] ipmi_si dmi-ipmi-si.0: Removing SMBIOS-specified kcs state machine in favor of ACPI
[ 12.999046] ipmi_si: Adding ACPI-specified kcs state machine
[ 12.999081] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0
[ 13.042949] usbcore: registered new interface driver usbserial_generic
[ 13.042958] usbserial: USB Serial support registered for generic
[ 13.045760] EDAC MC0: Giving out device to module ie31200_edac controller IE31200: DEV 0000:00:00.0 (POLLED)
[ 13.045971] iTCO_vendor_support: vendor-support=0
[ 13.046155] usbcore: registered new interface driver cp210x
[ 13.046164] usbserial: USB Serial support registered for cp210x
[ 13.046179] cp210x 1-10:1.0: cp210x converter detected
[ 13.047862] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 13.047915] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
[ 13.047989] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 13.048119] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 13.048196] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 13.048240] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 13.048277] sd 0:0:0:0: Attached scsi generic sg3 type 0
[ 13.048316] sd 0:0:1:0: Attached scsi generic sg4 type 0
[ 13.048348] sd 0:0:2:0: Attached scsi generic sg5 type 0
[ 13.048381] sd 0:0:3:0: Attached scsi generic sg6 type 0
[ 13.048630] sd 0:0:4:0: Attached scsi generic sg7 type 0
[ 13.048738] sd 0:0:5:0: Attached scsi generic sg8 type 0
[ 13.048844] sd 0:0:6:0: Attached scsi generic sg9 type 0
[ 13.048880] sd 0:0:7:0: Attached scsi generic sg10 type 0
[ 13.048913] sd 4:0:0:0: Attached scsi generic sg11 type 0
[ 13.048946] sd 5:0:0:0: Attached scsi generic sg12 type 0
[ 13.049623] usb 1-10: cp210x converter now attached to ttyUSB0
[ 13.050099] sd 6:0:0:0: Attached scsi generic sg13 type 0
[ 13.051229] mei_me 0000:00:16.0: Device doesn't have valid ME Interface
[ 13.052518] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 13.054619] spl: loading out-of-tree module taints kernel.
[ 13.054620] spl: loading out-of-tree module taints kernel.
[ 13.054696] spl: module verification failed: signature and/or required key missing - tainting kernel
[ 13.059074] SPL: Loaded module v0.7.12-2
[ 13.060975] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 13.060976] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 13.060977] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 13.060978] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 13.060978] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 13.062412] znvpair: module license 'CDDL' taints kernel.
[ 13.062413] Disabling lock debugging due to kernel taint
[ 13.095013] Adding 17596412k swap on /dev/nvme0n1p2. Priority:-2 extents:1 across:17596412k SSFS
[ 13.304307] ipmi_si IPI0001:00: Found new BMC (man_id: 0x000a3f, prod_id: 0x0d63, dev_id: 0x20)
[ 13.327390] ipmi_si IPI0001:00: IPMI kcs interface initialized
[ 13.386080] IPMI SSIF Interface driver
[ 13.471734] Adding 16410620k swap on /dev/sdm2. Priority:-3 extents:1 across:16410620k SSFS
[ 13.472222] Adding 16410620k swap on /dev/sdn2. Priority:-4 extents:1 across:16410620k SSFS
[ 13.493415] zfs: unknown parameter 'zil_slog_limit' ignored
[ 13.923465] EXT4-fs (md0): mounting ext2 file system using the ext4 subsystem
[ 13.927319] EXT4-fs (md0): mounted filesystem without journal. Opts: discard
[ 14.030411] ZFS: Loaded module v0.7.12-2+deb10u1, ZFS pool version 5000, ZFS filesystem version 5
[ 14.123908] intel_rapl: Found RAPL domain package
[ 14.123910] intel_rapl: Found RAPL domain core
[ 14.123911] intel_rapl: Found RAPL domain dram
[ 14.123913] intel_rapl: RAPL package 0 domain package locked by BIOS
[ 14.123916] intel_rapl: RAPL package 0 domain dram locked by BIOS
[ 17.807557] audit: type=1400 audit(1580075512.241:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=4838 comm="apparmor_parser"
[ 17.807561] audit: type=1400 audit(1580075512.241:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=4838 comm="apparmor_parser"
[ 17.807840] audit: type=1400 audit(1580075512.241:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=4841 comm="apparmor_parser"
[ 17.807842] audit: type=1400 audit(1580075512.241:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=4841 comm="apparmor_parser"
[ 17.807844] audit: type=1400 audit(1580075512.241:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=4841 comm="apparmor_parser"
[ 17.809859] audit: type=1400 audit(1580075512.241:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/named" pid=4843 comm="apparmor_parser"
[ 17.810125] audit: type=1400 audit(1580075512.241:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=4835 comm="apparmor_parser"
[ 17.810235] audit: type=1400 audit(1580075512.245:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/clamd" pid=4840 comm="apparmor_parser"
[ 17.810306] audit: type=1400 audit(1580075512.245:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/freshclam" pid=4839 comm="apparmor_parser"
[ 17.810352] audit: type=1400 audit(1580075512.245:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=4836 comm="apparmor_parser"
[ 17.862140] Process accounting resumed
[ 18.099306] IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready
[ 18.124327] Process accounting resumed
[ 18.130730] IPv6: ADDRCONF(NETDEV_UP): enp6s0: link is not ready
[ 21.010619] igb 0000:07:00.0 enp7s0: igb: enp7s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 21.118314] IPv6: ADDRCONF(NETDEV_CHANGE): enp7s0: link becomes ready
[ 21.810623] igb 0000:06:00.0 enp6s0: igb: enp6s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 21.918317] IPv6: ADDRCONF(NETDEV_CHANGE): enp6s0: link becomes ready
[ 23.384724] device enp6s0 entered promiscuous mode
[ 23.430506] device enp7s0 entered promiscuous mode
[ 23.430939] device enp3s0f0 entered promiscuous mode
[ 23.482095] device enp3s0f1 entered promiscuous mode
[ 207.955216] device-mapper: uevent: version 1.0.3
[ 207.955276] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[ 968.660367] IPv4: martian source 208.81.1.244 from 208.81.1.244, on dev enp6s0
[ 968.660373] ll header: 00000000: 40 16 7e 36 09 a6 00 13 c3 3b be 00 08 00 @.~6.....;....
[ 971.169136] IPv4: martian source 208.81.1.244 from 208.81.1.244, on dev enp6s0
[ 971.169142] ll header: 00000000: 40 16 7e 36 09 a6 00 13 c3 3b be 00 08 00 @.~6.....;....
[ 1023.003120] IPv4: martian source 208.81.1.244 from 208.81.1.244, on dev enp6s0
[ 1023.003135] ll header: 00000000: 40 16 7e 36 09 a6 00 13 c3 3b be 00 08 00 @.~6.....;....
[ 1225.578941] IPv4: martian source 208.81.1.244 from 208.81.1.244, on dev enp6s0
[ 1225.578951] ll header: 00000000: 40 16 7e 36 09 a6 00 13 c3 3b be 00 08 00 @.~6.....;....
[ 1229.419442] IPv4: martian source 208.81.1.244 from 208.81.1.244, on dev enp6s0
[ 1229.419444] ll header: 00000000: 40 16 7e 36 09 a6 00 13 c3 3b be 00 08 00 @.~6.....;....
** Model information
sys_vendor: ASUSTeK COMPUTER INC.
product_name: RS300-H8-PS12
product_version: Rev 1.xx
chassis_vendor: To Be Filled By O.E.M.
chassis_version: To Be Filled By O.E.M.
bios_vendor: American Megatrends Inc.
bios_version: 2101
board_vendor: ASUSTeK COMPUTER INC.
board_name: P9D-MH Series
board_version: Rev 1.xx
** Loaded modules:
binfmt_misc
dm_mod
nft_chain_nat_ipv4
nf_nat_ipv4
nf_nat
nf_conntrack
nf_defrag_ipv6
nf_defrag_ipv4
nf_tables
nfnetlink
intel_rapl
x86_pkg_temp_thermal
intel_powerclamp
coretemp
kvm_intel
zfs(POE)
kvm
irqbypass
zunicode(POE)
crct10dif_pclmul
crc32_pclmul
zavl(POE)
ghash_clmulni_intel
icp(POE)
ipmi_ssif
intel_cstate
joydev
zcommon(POE)
intel_uncore
znvpair(POE)
intel_rapl_perf
spl(OE)
pcspkr
mei_me
iTCO_wdt
mei
sg
iTCO_vendor_support
ie31200_edac
cp210x
pcc_cpufreq
usbserial
ipmi_si
evdev
sunrpc
ipmi_devintf
ipmi_msghandler
autofs4
ext4
crc16
mbcache
jbd2
fscrypto
ecb
raid10
raid456
async_raid6_recov
async_memcpy
async_pq
async_xor
async_tx
xor
raid6_pq
raid0
multipath
linear
raid1
md_mod
sd_mod
hid_generic
usbhid
hid
ast
ttm
xhci_pci
drm_kms_helper
aesni_intel
ahci
mpt3sas
aes_x86_64
libahci
bnx2x
xhci_hcd
crypto_simd
cryptd
drm
glue_helper
libata
raid_class
i2c_i801
scsi_transport_sas
igb
usbcore
lpc_ich
scsi_mod
nvme
nvme_core
dca
mdio
libcrc32c
i2c_algo_bit
crc32c_generic
usb_common
crc32c_intel
thermal
fan
video
button
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v3 Processor DRAM Controller [8086:0c08] (rev 06)
Subsystem: Intel Corporation Xeon E3-1200 v3 Processor DRAM Controller [8086:0c08]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: ie31200_edac
Kernel modules: ie31200_edac
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller [8086:0c01] (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 25
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: de100000-de2fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:01.1 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x8 Controller [8086:0c05] (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 26
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: de600000-de6fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:01.2 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x4 Controller [8086:0c09] (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 27
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: de500000-de5fffff
Prefetchable memory behind bridge: 00000000d9800000-00000000db8fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:14.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI [8086:8c31] (rev 05) (prog-if 30 [XHCI])
Subsystem: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI [8086:8c31]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 38
Region 0: Memory at de700000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:16.0 Communication controller [0780]: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 [8086:8c3a] (rev 04)
Subsystem: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller [8086:8c3a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at de715000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel modules: mei_me
00:16.1 Communication controller [0780]: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #2 [8086:8c3b] (rev 04)
Subsystem: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller [8086:8c3b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 11
Region 0: Memory at de714000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
00:1c.0 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 [8086:8c10] (rev d5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 28
Bus: primary=00, secondary=04, subordinate=05, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: dc000000-de0fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #2 [8086:8c12] (rev d5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 29
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: de400000-de4fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 [8086:8c14] (rev d5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 30
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: de300000-de3fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1f.0 ISA bridge [0601]: Intel Corporation C224 Series Chipset Family Server Standard SKU LPC Controller [8086:8c54] (rev 05)
Subsystem: Intel Corporation C224 Series Chipset Family Server Standard SKU LPC Controller [8086:8c54]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] [8086:8c02] (rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] [8086:8c02]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 37
Region 0: I/O ports at f070 [size=8]
Region 1: I/O ports at f060 [size=4]
Region 2: I/O ports at f050 [size=8]
Region 3: I/O ports at f040 [size=4]
Region 4: I/O ports at f020 [size=32]
Region 5: Memory at de712000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller [8086:8c22] (rev 05)
Subsystem: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller [8086:8c22]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at de711000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f000 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
01:00.0 Serial Attached SCSI controller [0107]: LSI Logic / Symbios Logic SAS2308 PCI-Express Fusion-MPT SAS-2 [1000:0087] (rev 05)
Subsystem: ASUSTeK Computer Inc. SAS2308 PCI-Express Fusion-MPT SAS-2 [1043:8583]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at e000 [size=256]
Region 1: Memory at de240000 (64-bit, non-prefetchable) [size=64K]
Region 3: Memory at de200000 (64-bit, non-prefetchable) [size=256K]
Expansion ROM at de100000 [disabled] [size=1M]
Capabilities: <access denied>
Kernel driver in use: mpt3sas
Kernel modules: mpt3sas
02:00.0 Non-Volatile memory controller [0108]: Phison Electronics Corporation E12 NVMe Controller [1987:5012] (rev 01) (prog-if 02 [NVM Express])
Subsystem: Phison Electronics Corporation E12 NVMe Controller [1987:5012]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
NUMA node: 0
Region 0: Memory at de600000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: nvme
Kernel modules: nvme
03:00.0 Ethernet controller [0200]: Broadcom Limited BCM57840 NetXtreme II 10 Gigabit Ethernet [14e4:16a1] (rev 11)
Subsystem: ASUSTeK Computer Inc. BCM57840 NetXtreme II 10 Gigabit Ethernet [1043:8591]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at db000000 (64-bit, prefetchable) [size=8M]
Region 2: Memory at da800000 (64-bit, prefetchable) [size=8M]
Region 4: Memory at db810000 (64-bit, prefetchable) [size=64K]
Expansion ROM at de580000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: bnx2x
Kernel modules: bnx2x
03:00.1 Ethernet controller [0200]: Broadcom Limited BCM57840 NetXtreme II 10 Gigabit Ethernet [14e4:16a1] (rev 11)
Subsystem: ASUSTeK Computer Inc. BCM57840 NetXtreme II 10 Gigabit Ethernet [1043:8591]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at da000000 (64-bit, prefetchable) [size=8M]
Region 2: Memory at d9800000 (64-bit, prefetchable) [size=8M]
Region 4: Memory at db800000 (64-bit, prefetchable) [size=64K]
Expansion ROM at de500000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: bnx2x
Kernel modules: bnx2x
04:00.0 PCI bridge [0604]: ASPEED Technology, Inc. AST1150 PCI-to-PCI Bridge [1a03:1150] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Bus: primary=04, secondary=05, subordinate=05, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: dc000000-de0fffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
05:00.0 VGA compatible controller [0300]: ASPEED Technology, Inc. ASPEED Graphics Family [1a03:2000] (rev 21) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. ASPEED Graphics Family [1043:84eb]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 18
Region 0: Memory at dc000000 (32-bit, non-prefetchable) [size=32M]
Region 1: Memory at de000000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at d000 [size=128]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: ast
Kernel modules: ast
06:00.0 Ethernet controller [0200]: Intel Corporation I210 Gigabit Network Connection [8086:1533] (rev 03)
Subsystem: ASUSTeK Computer Inc. I210 Gigabit Network Connection [1043:8557]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at de400000 (32-bit, non-prefetchable) [size=512K]
Region 2: I/O ports at c000 [size=32]
Region 3: Memory at de480000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: igb
Kernel modules: igb
07:00.0 Ethernet controller [0200]: Intel Corporation I210 Gigabit Network Connection [8086:1533] (rev 03)
Subsystem: ASUSTeK Computer Inc. I210 Gigabit Network Connection [1043:8557]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at de300000 (32-bit, non-prefetchable) [size=512K]
Region 2: I/O ports at b000 [size=32]
Region 3: Memory at de380000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: igb
Kernel modules: igb
** USB devices:
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 046b:ff10 American Megatrends, Inc. Virtual Keyboard and Mouse
Bus 001 Device 002: ID 046b:ff01 American Megatrends, Inc.
Bus 001 Device 003: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP2102/CP2109 UART Bridge Controller [CP210x family]
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 10.2
APT prefers stable
APT policy: (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 4.19.0-6-amd64 (SMP w/8 CPU cores)
Kernel taint flags: TAINT_PROPRIETARY_MODULE, TAINT_OOT_MODULE, TAINT_UNSIGNED_MODULE
Locale: LANG=en_CA.UTF-8, LC_CTYPE=en_CA.UTF-8 (charmap=UTF-8), LANGUAGE=en_CA:en (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-4.19.0-6-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.133+deb10u1
ii kmod 26-1
ii linux-base 4.6
Versions of packages linux-image-4.19.0-6-amd64 recommends:
ii apparmor 2.13.2-10
ii firmware-linux-free 3.4
Versions of packages linux-image-4.19.0-6-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02+dfsg1-20
ii linux-doc-4.19 4.19.67-2+deb10u2
Versions of packages linux-image-4.19.0-6-amd64 is related to:
pn firmware-amd-graphics <none>
pn firmware-atheros <none>
ii firmware-bnx2 20190114-2
ii firmware-bnx2x 20190114-2
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
pn firmware-misc-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
--- End Message ---