--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-5.2.0-2-amd64: USB mouse stops working shortly after boot
- From: Constantin Makshin <cmakshin@gmail.com>
- Date: Sun, 08 Sep 2019 04:31:06 +0300
- Message-id: <156790626612.2492.7585848087186994228.reportbug@dinosaur-desktop>
Package: src:linux
Version: 5.2.9-2
Severity: important
Sortly after starting the system and X Window the kernel reports a DMA
error (two messages at 70.5s) and USB mouse stops working despite its
light being turned on. Booting into 4.19.37-6 kernel on the same system
solves the problem.
-- Package-specific info:
** Version:
Linux version 5.2.0-2-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-21)) #1 SMP Debian 5.2.9-2 (2019-08-21)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-5.2.0-2-amd64 root=UUID=712abf8f-4999-41af-b98e-caed36815485 ro rd.driver.blacklist=nouveau video=vesa:off nvidia-drm.modeset=1 quiet
** Tainted: PWOE (12801)
* Proprietary module has been loaded.
* Taint on warning.
* Out-of-tree module has been loaded.
* Unsigned module has been loaded.
** Kernel log:
[ 11.415562] usbcore: registered new interface driver uas
[ 11.445791] input: Microsoft X-Box 360 pad as /devices/pci0000:00/0000:00:1c.4/0000:03:00.0/usb3/3-1/3-1.1/3-1.1:1.0/input/input3
[ 11.445904] usbcore: registered new interface driver xpad
[ 11.534188] hidraw: raw HID events driver (C) Jiri Kosina
[ 11.768811] systemd-udevd[450]: Process '/usr/sbin/alsactl -E HOME=/run/alsa restore 0' failed with exit code 99.
[ 11.784133] usbcore: registered new interface driver usbhid
[ 11.784134] usbhid: USB HID core driver
[ 11.825219] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1c.4/0000:03:00.0/usb3/3-1/3-1.4/3-1.4:1.0/0003:046D:C05B.0001/input/input4
[ 11.825470] hid-generic 0003:046D:C05B.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:03:00.0-1.4/input0
[ 12.389644] scsi 8:0:0:0: Direct-Access Generic- SD/MMC/MS/MSPRO 1.00 PQ: 0 ANSI: 4
[ 12.390023] sd 8:0:0:0: Attached scsi generic sg3 type 0
[ 12.395234] sd 8:0:0:0: [sdc] Attached SCSI removable disk
[ 14.014309] r8169 0000:06:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-3.fw
[ 14.014505] RTL8211E Gigabit Ethernet r8169-600:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-600:00, irq=IGNORE)
[ 14.199937] r8169 0000:06:00.0 eth0: Link is Down
[ 14.761314] EXT4-fs (sda4): re-mounted. Opts: data=ordered,errors=remount-ro
[ 15.138147] device-mapper: uevent: version 1.0.3
[ 15.138208] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com
[ 16.340369] r8169 0000:06:00.0 eth0: Link is Up - 1Gbps/Full - flow control off
[ 16.340379] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 16.882224] loop: module loaded
[ 16.932114] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 430.40 Sun Jul 21 04:57:42 CDT 2019
[ 17.032375] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[ 17.656301] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 17.656302] [drm] No driver support for vblank timestamp query.
[ 17.688572] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0
[ 17.963952] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: data=ordered
[ 18.008420] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: data=ordered
[ 18.069835] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: data=ordered
[ 60.518396] ------------[ cut here ]------------
[ 60.518398] refcount_t: underflow; use-after-free.
[ 60.518413] WARNING: CPU: 2 PID: 2199 at lib/refcount.c:190 refcount_sub_and_test_checked+0x61/0x80
[ 60.518413] Modules linked in: cpufreq_conservative cpufreq_powersave cpufreq_userspace binfmt_misc ip6t_REJECT nf_reject_ipv6 nft_counter xt_tcpudp ipt_REJECT nf_reject_ipv4 xt_comment xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c nft_compat x_tables nf_tables nfnetlink nls_ascii nls_cp437 vfat fat nvidia_drm(POE) drm_kms_helper drm nvidia_modeset(POE) loop dm_crypt dm_mod hid_generic usbhid joydev hid xpad uas usb_storage ff_memless intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp snd_ctxfi kvm_intel kvm snd_pcm nvidia(POE) r8169 snd_timer irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd realtek aesni_intel sr_mod soundcore ehci_pci iTCO_wdt xhci_pci libphy ehci_hcd iTCO_vendor_support xhci_hcd cdrom mei_me usbcore aes_x86_64 i2c_i801 sg ipmi_devintf crypto_simd watchdog mei ipmi_msghandler cryptd usb_common lpc_ich glue_helper pcc_cpufreq mfd_core ie31200_edac intel_cstate intel_uncore video mxm_wmi wmi intel_rapl_perf efi_pstore efivars
[ 60.518453] button ext4 crc16 mbcache jbd2 crc32c_generic sd_mod ahci libahci libata scsi_mod crc32c_intel evdev serio_raw fan
[ 60.518462] CPU: 2 PID: 2199 Comm: Xorg Tainted: P OE 5.2.0-2-amd64 #1 Debian 5.2.9-2
[ 60.518463] Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./Z77X-UD4H, BIOS F1 11/02/2012
[ 60.518467] RIP: 0010:refcount_sub_and_test_checked+0x61/0x80
[ 60.518469] Code: 92 c1 29 fa 85 c9 74 db 0f b6 05 d4 43 d1 00 84 c0 75 da 48 c7 c7 a8 d7 eb b1 88 44 24 07 c6 05 be 43 d1 00 01 e8 b9 67 c9 ff <0f> 0b 0f b6 44 24 07 eb bc b8 01 00 00 00 eb b5 31 c0 c3 66 66 2e
[ 60.518470] RSP: 0018:ffffa918489f7da0 EFLAGS: 00010286
[ 60.518472] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000006
[ 60.518473] RDX: 0000000000000007 RSI: 0000000000000096 RDI: ffff97818eb17680
[ 60.518474] RBP: 0000000000000000 R08: 00000000000003c6 R09: 0000000000000004
[ 60.518475] R10: 0000000000000000 R11: 0000000000000001 R12: ffff978187906428
[ 60.518476] R13: 0000000000000000 R14: ffff978188c6d000 R15: 0000000000000008
[ 60.518478] FS: 00007fc6f5137a80(0000) GS:ffff97818eb00000(0000) knlGS:0000000000000000
[ 60.518479] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 60.518480] CR2: 000055701550aab8 CR3: 00000007fd416006 CR4: 00000000001606e0
[ 60.518482] Call Trace:
[ 60.518493] nv_drm_atomic_helper_disable_all+0xa7/0x250 [nvidia_drm]
[ 60.518497] nv_drm_master_drop+0x22/0x60 [nvidia_drm]
[ 60.518519] drm_drop_master+0x1e/0x30 [drm]
[ 60.518534] drm_master_release+0x91/0xb0 [drm]
[ 60.518550] drm_file_free.part.5+0x2e2/0x2f0 [drm]
[ 60.518565] drm_release+0x4b/0x80 [drm]
[ 60.518570] __fput+0xb6/0x220
[ 60.518574] task_work_run+0x8a/0xb0
[ 60.518577] exit_to_usermode_loop+0xeb/0xf0
[ 60.518580] do_syscall_64+0x128/0x130
[ 60.518583] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 60.518585] RIP: 0033:0x7fc6f575d5b1
[ 60.518587] Code: 2d aa 00 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b3 0f 1f 80 00 00 00 00 8b 05 9a ee 00 00 85 c0 75 16 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 3f c3 66 0f 1f 44 00 00 53 89 fb 48 83 ec 10
[ 60.518589] RSP: 002b:00007ffd6737d118 EFLAGS: 00000246 ORIG_RAX: 0000000000000003
[ 60.518590] RAX: 0000000000000000 RBX: 000000000000000a RCX: 00007fc6f575d5b1
[ 60.518591] RDX: 00005570155072b0 RSI: 0000000000000002 RDI: 000000000000000a
[ 60.518592] RBP: 0000557015508ec0 R08: 000000000000002f R09: 0000557015509030
[ 60.518593] R10: 0000000000000001 R11: 0000000000000246 R12: 0000557015509030
[ 60.518594] R13: 0000557015508f00 R14: 0000000000000000 R15: 0000000000000000
[ 60.518596] ---[ end trace ba5835a0df9804e9 ]---
[ 70.595968] DMAR: DRHD: handling fault status reg 2
[ 70.595976] DMAR: [DMA Read] Request device [03:00.0] fault addr fff57000 [fault reason 06] PTE Read access is not set
[ 102.623599] usb 3-1.2.3-port3: cannot reset (err = -110)
[ 103.647603] usb 3-1.2.3-port3: cannot reset (err = -110)
[ 104.671615] usb 3-1.2.3-port3: cannot reset (err = -110)
[ 105.695608] usb 3-1.2.3-port3: cannot reset (err = -110)
[ 106.719615] usb 3-1.2.3-port3: cannot reset (err = -110)
[ 106.719619] usb 3-1.2.3-port3: Cannot enable. Maybe the USB cable is bad?
[ 107.743606] usb 3-1.2.3-port3: cannot disable (err = -110)
[ 108.767602] usb 3-1.2.3-port3: cannot reset (err = -110)
[ 109.791614] usb 3-1.2.3-port3: cannot reset (err = -110)
[ 110.815607] usb 3-1.2.3-port3: cannot reset (err = -110)
[ 111.839547] usb 3-1.2.3-port3: cannot reset (err = -110)
[ 112.863612] usb 3-1.2.3-port3: cannot reset (err = -110)
[ 112.863617] usb 3-1.2.3-port3: Cannot enable. Maybe the USB cable is bad?
[ 113.887607] usb 3-1.2.3-port3: cannot disable (err = -110)
[ 114.911613] usb 3-1.2.3-port3: cannot reset (err = -110)
[ 115.935610] usb 3-1.2.3-port3: cannot reset (err = -110)
[ 116.959605] usb 3-1.2.3-port3: cannot reset (err = -110)
[ 117.983624] usb 3-1.2.3-port3: cannot reset (err = -110)
[ 119.011598] usb 3-1.2.3-port3: cannot reset (err = -110)
[ 119.011603] usb 3-1.2.3-port3: Cannot enable. Maybe the USB cable is bad?
[ 120.031607] usb 3-1.2.3-port3: cannot disable (err = -110)
[ 121.055566] usb 3-1.2.3-port3: cannot reset (err = -110)
[ 122.079724] usb 3-1.2.3-port3: cannot reset (err = -110)
[ 123.103526] usb 3-1.2.3-port3: cannot reset (err = -110)
[ 124.127579] usb 3-1.2.3-port3: cannot reset (err = -110)
[ 125.151577] usb 3-1.2.3-port3: cannot reset (err = -110)
[ 125.151581] usb 3-1.2.3-port3: Cannot enable. Maybe the USB cable is bad?
[ 126.175579] usb 3-1.2.3-port3: cannot disable (err = -110)
[ 127.199598] usb 3-1.2.3-port3: cannot disable (err = -110)
[ 132.320464] hub 3-1.2.3:1.0: hub_ext_port_status failed (err = -110)
** Model information
sys_vendor: Gigabyte Technology Co., Ltd.
product_name: To be filled by O.E.M.
product_version: To be filled by O.E.M.
chassis_vendor: Gigabyte Technology Co., Ltd.
chassis_version: To Be Filled By O.E.M.
bios_vendor: American Megatrends Inc.
bios_version: F1
board_vendor: Gigabyte Technology Co., Ltd.
board_name: Z77X-UD4H
board_version: To be filled by O.E.M.
** Loaded modules:
cpufreq_conservative
cpufreq_powersave
cpufreq_userspace
binfmt_misc
ip6t_REJECT
nf_reject_ipv6
nft_counter
xt_tcpudp
ipt_REJECT
nf_reject_ipv4
xt_comment
xt_conntrack
nf_conntrack
nf_defrag_ipv6
nf_defrag_ipv4
libcrc32c
nft_compat
x_tables
nf_tables
nfnetlink
nls_ascii
nls_cp437
vfat
fat
nvidia_drm(POE)
drm_kms_helper
drm
nvidia_modeset(POE)
loop
dm_crypt
dm_mod
hid_generic
usbhid
joydev
hid
xpad
uas
usb_storage
ff_memless
intel_rapl
x86_pkg_temp_thermal
intel_powerclamp
coretemp
snd_ctxfi
kvm_intel
kvm
snd_pcm
nvidia(POE)
r8169
snd_timer
irqbypass
crct10dif_pclmul
crc32_pclmul
ghash_clmulni_intel
snd
realtek
aesni_intel
sr_mod
soundcore
ehci_pci
iTCO_wdt
xhci_pci
libphy
ehci_hcd
iTCO_vendor_support
xhci_hcd
cdrom
mei_me
usbcore
aes_x86_64
i2c_i801
sg
ipmi_devintf
crypto_simd
watchdog
mei
ipmi_msghandler
cryptd
usb_common
lpc_ich
glue_helper
pcc_cpufreq
mfd_core
ie31200_edac
intel_cstate
intel_uncore
video
mxm_wmi
wmi
intel_rapl_perf
efi_pstore
efivars
button
ext4
crc16
mbcache
jbd2
crc32c_generic
sd_mod
ahci
libahci
libata
scsi_mod
crc32c_intel
evdev
serio_raw
fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller [8086:0150] (rev 09)
Subsystem: Gigabyte Technology Co., Ltd Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller [1458:5000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: ivb_uncore
Kernel modules: ie31200_edac
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port [8086:0151] (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 25
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff [size=4K]
Memory behind bridge: f5000000-f60fffff [size=17M]
Prefetchable memory behind bridge: 00000000d0000000-00000000e1ffffff [size=288M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) (prog-if 30 [XHCI])
Subsystem: Gigabyte Technology Co., Ltd 7 Series/C210 Series Chipset Family USB xHCI Host Controller [1458:5007]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 34
Region 0: Memory at f4200000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C216 Chipset Family MEI Controller #1 [8086:1e3a] (rev 04)
Subsystem: Gigabyte Technology Co., Ltd 7 Series/C216 Chipset Family MEI Controller [1458:1c3a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 33
Region 0: Memory at f4216000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C216 Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) (prog-if 20 [EHCI])
Subsystem: Gigabyte Technology Co., Ltd 7 Series/C216 Chipset Family USB Enhanced Host Controller [1458:5006]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f4214000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C216 Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 26
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: None
Memory behind bridge: None
Prefetchable memory behind bridge: None
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 5 [8086:1e18] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 27
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: None
Memory behind bridge: f6300000-f63fffff [size=1M]
Prefetchable memory behind bridge: None
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev c4) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 28
Bus: primary=00, secondary=04, subordinate=05, sec-latency=0
I/O behind bridge: 0000d000-0000dfff [size=4K]
Memory behind bridge: f0000000-f41fffff [size=66M]
Prefetchable memory behind bridge: None
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.6 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 7 [8086:1e1c] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 29
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
I/O behind bridge: 0000c000-0000cfff [size=4K]
Memory behind bridge: None
Prefetchable memory behind bridge: 00000000e2100000-00000000e21fffff [size=1M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.7 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 8 [8086:1e1e] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 30
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
I/O behind bridge: 0000b000-0000bfff [size=4K]
Memory behind bridge: f6200000-f62fffff [size=1M]
Prefetchable memory behind bridge: None
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C216 Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) (prog-if 20 [EHCI])
Subsystem: Gigabyte Technology Co., Ltd 7 Series/C216 Chipset Family USB Enhanced Host Controller [1458:5006]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f4213000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1f.0 ISA bridge [0601]: Intel Corporation Z77 Express Chipset LPC Controller [8086:1e44] (rev 04)
Subsystem: Gigabyte Technology Co., Ltd Z77 Express Chipset LPC Controller [1458:5001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 7 Series/C210 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e02] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Gigabyte Technology Co., Ltd 7 Series/C210 Series Chipset Family 6-port SATA Controller [AHCI mode] [1458:b005]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 31
Region 0: I/O ports at f070 [size=8]
Region 1: I/O ports at f060 [size=4]
Region 2: I/O ports at f050 [size=8]
Region 3: I/O ports at f040 [size=4]
Region 4: I/O ports at f020 [size=32]
Region 5: Memory at f4212000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C216 Chipset Family SMBus Controller [8086:1e22] (rev 04)
Subsystem: Gigabyte Technology Co., Ltd 7 Series/C216 Chipset Family SMBus Controller [1458:5001]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f4211000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f000 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GP104 [GeForce GTX 1080] [10de:1b80] (rev a1) (prog-if 00 [VGA controller])
Subsystem: NVIDIA Corporation GP104 [GeForce GTX 1080] [10de:1b80]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 37
Region 0: Memory at f5000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at e0000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at e000 [size=128]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nvidia
Kernel modules: nvidia
01:00.1 Audio device [0403]: NVIDIA Corporation GP104 High Definition Audio Controller [10de:10f0] (rev a1)
Subsystem: NVIDIA Corporation GP104 High Definition Audio Controller [10de:1b80]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 255
Region 0: Memory at f6080000 (32-bit, non-prefetchable) [disabled] [size=16K]
Capabilities: <access denied>
Kernel modules: snd_hda_intel
03:00.0 USB controller [0c03]: VIA Technologies, Inc. VL80x xHCI USB 3.0 Controller [1106:3432] (rev 03) (prog-if 30 [XHCI])
Subsystem: Gigabyte Technology Co., Ltd VL80x xHCI USB 3.0 Controller [1458:5007]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 35
Region 0: Memory at f6300000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
04:00.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 41) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Bus: primary=04, secondary=05, subordinate=05, sec-latency=64
I/O behind bridge: 0000d000-0000dfff [size=4K]
Memory behind bridge: f0000000-f41fffff [size=66M]
Prefetchable memory behind bridge: None
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
05:00.0 Multimedia audio controller [0401]: Creative Labs EMU20k1 [Sound Blaster X-Fi Series] [1102:0005]
Subsystem: Creative Labs X-Fi XtremeGamer FATAL1TY PRO [1102:002c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (1000ns min, 1250ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at d000 [size=32]
Region 1: Memory at f4000000 (64-bit, non-prefetchable) [size=2M]
Region 3: Memory at f0000000 (64-bit, non-prefetchable) [size=64M]
Capabilities: <access denied>
Kernel driver in use: snd_ctxfi
Kernel modules: snd_ctxfi
06:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06)
Subsystem: Gigabyte Technology Co., Ltd Onboard Ethernet [1458:e000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at c000 [size=256]
Region 2: Memory at e2104000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at e2100000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
07:00.0 SATA controller [0106]: Marvell Technology Group Ltd. 88SE9172 SATA 6Gb/s Controller [1b4b:9172] (rev 11) (prog-if 01 [AHCI 1.0])
Subsystem: Gigabyte Technology Co., Ltd 88SE9172 SATA 6Gb/s Controller [1458:b000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 32
Region 0: I/O ports at b040 [size=8]
Region 1: I/O ports at b030 [size=4]
Region 2: I/O ports at b020 [size=8]
Region 3: I/O ports at b010 [size=4]
Region 4: I/O ports at b000 [size=16]
Region 5: Memory at f6210000 (32-bit, non-prefetchable) [size=512]
Expansion ROM at f6200000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
** USB devices:
Bus 006 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 005: ID 046d:c05b Logitech, Inc. M-U0004 810-001317 [B110 Optical USB Mouse]
Bus 003 Device 007: ID 0bda:0307 Realtek Semiconductor Corp. Card Reader
Bus 003 Device 006: ID 0424:2532 Standard Microsystems Corp.
Bus 003 Device 004: ID 0424:2531 Standard Microsystems Corp.
Bus 003 Device 003: ID 045e:028e Microsoft Corp. Xbox360 Controller
Bus 003 Device 002: ID 2109:0811 VIA Labs, Inc. Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: bullseye/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 5.2.0-2-amd64 (SMP w/4 CPU cores)
Kernel taint flags: TAINT_PROPRIETARY_MODULE, TAINT_WARN, TAINT_OOT_MODULE, TAINT_UNSIGNED_MODULE
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: sysvinit (via /sbin/init)
Versions of packages linux-image-5.2.0-2-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.135
ii kmod 26-1
ii linux-base 4.6
Versions of packages linux-image-5.2.0-2-amd64 recommends:
pn apparmor <none>
ii firmware-linux-free 3.4
Versions of packages linux-image-5.2.0-2-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-efi-amd64 2.04-2
pn linux-doc-5.2 <none>
Versions of packages linux-image-5.2.0-2-amd64 is related to:
pn firmware-amd-graphics <none>
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
pn firmware-misc-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
ii firmware-realtek 20190717-1
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
--- End Message ---