--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-4.19.0-1-amd64: Samsung PM951 SSD in Dell XPS 15 9550 goes read-only
- From: Tyler Schwend <tyler.schwend@gmail.com>
- Date: Thu, 03 Jan 2019 14:20:31 -0500
- Message-id: <154654323166.2546.4240287981776306556.reportbug@func-platform.internal.intersection.com>
Package: src:linux
Version: 4.19.12-1
Severity: critical
Tags: upstream
Justification: breaks the whole system
Dear Maintainer,
Submitting a bug report wherein after a kernel upgrade my laptop's SSD will,
during use or idle, go into read-only mode after minutes or hours of uptime. It
seems this is related to NVME/APSTE features (which I don't understand). Below
are some similar reports for other models:
https://groups.google.com/forum/#!searchin/linux.debian.bugs.dist/apst$20samsung|sort:date/linux.debian.bugs.dist/1AAKPI7rfQA/450TYup-
AQAJ
https://bbs.archlinux.org/viewtopic.php?id=232692
https://askubuntu.com/questions/905710/ext4-fs-error-after-
ubuntu-17-04-upgrade/906105#906105
I had been running an older kernel (because I previously noticed this and
associated it with a kernel upgrade) but over time forgot why I was using an
old kernel. Some docker work required me to update my kernel again, the problem
returned, and I was reminded of why I kept running the old kernel.
I believe that linux-image-4.17.0-3-amd64 works fine for me (possibly now that
I have disabled APSTE) but linux-image-4.19.0-1-amd64 does not. I don't know
what version of kernel I was running previously, but I will boot back to
4.17.03 and use that for a time, and then update the bug report.
* What led up to the situation?
- Upgrading from an older 4.x kernel. I think 4.17 is fine, but will have to
run for a while to be sure.
* What exactly did you do (or not do) that was effective (or
ineffective)?
- No fixes found except for running older kernel.
- Disabling APSTE with nvme_core.default_ps_max_latency_us=0 provides no
relief, though it is reported as disabled by NVME tool.
- There are no firmware updates available for this drive.
-- Package-specific info:
** Version:
Linux version 4.19.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 8.2.0 (Debian 8.2.0-13)) #1 SMP Debian 4.19.12-1 (2018-12-22)
** Command line:
BOOT_IMAGE=/vmlinuz-4.19.0-1-amd64 root=/dev/mapper/func--platform--vg-root ro quiet nvme_core.default_ps_max_latency_us=0
** Tainted: OE (12288)
* Out-of-tree module has been loaded.
* Unsigned module has been loaded.
** Kernel log:
[ 3.661043] Bluetooth: L2CAP socket layer initialized
[ 3.661055] Bluetooth: SCO socket layer initialized
[ 3.666339] usbcore: registered new interface driver btusb
[ 3.690698] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 3.690699] Bluetooth: BNEP filters: protocol multicast
[ 3.690702] Bluetooth: BNEP socket layer initialized
[ 3.713324] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
[ 3.713365] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
[ 3.713400] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
[ 3.713450] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
[ 3.713507] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24
[ 3.715654] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input25
[ 3.736832] input: Logitech Unifying Device. Wireless PID:2011 Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.2/0003:046D:C52B.0008/0003:046D:2011.000A/input/input26
[ 3.737036] input: Logitech Unifying Device. Wireless PID:2011 Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.2/0003:046D:C52B.0008/0003:046D:2011.000A/input/input27
[ 3.737096] input: Logitech Unifying Device. Wireless PID:2011 System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.2/0003:046D:C52B.0008/0003:046D:2011.000A/input/input28
[ 3.737154] hid-generic 0003:046D:2011.000A: input,hidraw7: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:2011] on usb-0000:00:14.0-2.3:4
[ 3.738701] input: Logitech Unifying Device. Wireless PID:4055 Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.2/0003:046D:C52B.0008/0003:046D:4055.000B/input/input32
[ 3.738766] hid-generic 0003:046D:4055.000B: input,hidraw8: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:4055] on usb-0000:00:14.0-2.3:1
[ 3.752683] input: Logitech K520 as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.2/0003:046D:C52B.0008/0003:046D:2011.000C/input/input36
[ 3.781508] Bluetooth: hci0: BCM: chip id 102
[ 3.782508] Bluetooth: hci0: BCM: features 0x2f
[ 3.798526] Bluetooth: hci0: func-platform
[ 3.799513] Bluetooth: hci0: BCM (001.001.005) build 0422
[ 3.801782] bluetooth hci0: firmware: direct-loading firmware brcm/BCM-0a5c-6410.hcd
[ 3.847890] logitech-hidpp-device 0003:046D:2011.000C: input,hidraw9: USB HID v1.11 Keyboard [Logitech K520] on usb-0000:00:14.0-2.3:2
[ 3.854718] input: Logitech K520 as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.2/0003:046D:C52B.0008/0003:046D:2011.000D/input/input37
[ 3.874363] uvcvideo 1-2.1:1.2: Entity type for entity Extension 4 was not initialized!
[ 3.874364] uvcvideo 1-2.1:1.2: Entity type for entity Processing 2 was not initialized!
[ 3.874365] uvcvideo 1-2.1:1.2: Entity type for entity Camera 1 was not initialized!
[ 3.874366] uvcvideo 1-2.1:1.2: Entity type for entity Extension 5 was not initialized!
[ 3.874367] uvcvideo 1-2.1:1.2: Entity type for entity Extension 6 was not initialized!
[ 3.874368] uvcvideo 1-2.1:1.2: Entity type for entity Extension 7 was not initialized!
[ 3.874369] uvcvideo 1-2.1:1.2: Entity type for entity Extension 8 was not initialized!
[ 3.874494] input: UVC Camera (046d:0823) as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.1/1-2.1:1.2/input/input38
[ 3.899963] logitech-hidpp-device 0003:046D:2011.000D: input,hidraw10: USB HID v1.11 Keyboard [Logitech K520] on usb-0000:00:14.0-2.3:3
[ 3.901611] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0c45:6713)
[ 3.906601] input: Logitech as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.2/0003:046D:C52B.0008/0003:046D:4055.000E/input/input39
[ 3.925608] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 3.929535] usb 3-1.3.3: New USB device found, idVendor=2109, idProduct=0100, bcdDevice= 1.22
[ 3.929537] usb 3-1.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.929538] usb 3-1.3.3: Product: USB 2.0 BILLBOARD
[ 3.929540] usb 3-1.3.3: Manufacturer: VIA Technologies Inc.
[ 3.929541] usb 3-1.3.3: SerialNumber: 0000000000000001
[ 3.936187] uvcvideo 1-12:1.0: Entity type for entity Extension 4 was not initialized!
[ 3.936189] uvcvideo 1-12:1.0: Entity type for entity Extension 3 was not initialized!
[ 3.936190] uvcvideo 1-12:1.0: Entity type for entity Processing 2 was not initialized!
[ 3.936191] uvcvideo 1-12:1.0: Entity type for entity Camera 1 was not initialized!
[ 3.936262] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.0/input/input40
[ 3.951824] logitech-hidpp-device 0003:046D:4055.000E: input,hidraw7: USB HID v1.11 Mouse [Logitech ] on usb-0000:00:14.0-2.3:5
[ 3.951866] usbcore: registered new interface driver uvcvideo
[ 3.951867] USB Video Class driver (1.1.1)
[ 3.960750] input: Logitech K520 as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.2/0003:046D:C52B.0008/0003:046D:2011.000A/input/input41
[ 3.960946] logitech-hidpp-device 0003:046D:2011.000A: input,hidraw11: USB HID v1.11 Keyboard [Logitech K520] on usb-0000:00:14.0-2.3:4
[ 3.986723] usbcore: registered new interface driver snd-usb-audio
[ 4.026646] input: Logitech Wireless Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.2/0003:046D:C52B.0008/0003:046D:4055.000B/input/input42
[ 4.026860] logitech-hidpp-device 0003:046D:4055.000B: input,hidraw8: USB HID v1.11 Mouse [Logitech Wireless Mouse] on usb-0000:00:14.0-2.3:1
[ 4.067847] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 4.749645] Console: switching to colour frame buffer device 240x67
[ 4.775829] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 5.001435] Bluetooth: hci0: BCM (001.001.005) build 0422
[ 5.017435] Bluetooth: hci0: BCM20703A1 Generic USB 20Mhz fcbga_BU
[ 5.764019] IPv6: ADDRCONF(NETDEV_CHANGE): enx00e04c680115: link becomes ready
[ 5.764171] r8152 4-1.4:1.0 enx00e04c680115: carrier on
[ 7.244011] vboxdrv: Found 8 processor cores
[ 7.263729] vboxdrv: TSC mode is Invariant, tentative frequency 2592000813 Hz
[ 7.263730] vboxdrv: Successfully loaded version 5.2.22_Debian (interface 0x00290001)
[ 7.269797] VBoxNetFlt: Successfully started.
[ 7.275622] VBoxNetAdp: Successfully started.
[ 7.281880] VBoxPciLinuxInit
[ 7.283883] vboxpci: IOMMU not found (not registered)
[ 7.510450] kauditd_printk_skb: 16 callbacks suppressed
[ 7.510451] audit: type=1400 audit(1546542346.808:27): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=1267 comm="apparmor_parser"
[ 7.641604] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 7.642839] Bridge firewalling registered
[ 7.678030] Initializing XFRM netlink socket
[ 7.707455] IPv6: ADDRCONF(NETDEV_UP): br-71d90485f4ea: link is not ready
[ 7.768733] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
[ 8.998665] fuse init (API version 7.27)
[ 9.375971] usb-storage 3-1.3.1:1.0: USB Mass Storage device detected
[ 9.376396] scsi host2: usb-storage 3-1.3.1:1.0
[ 9.376470] usbcore: registered new interface driver usb-storage
[ 9.379003] usbcore: registered new interface driver uas
[ 10.362607] logitech-hidpp-device 0003:046D:4055.000E: HID++ 4.5 device connected.
[ 10.389080] scsi 2:0:0:0: Direct-Access Generic STORAGE DEVICE 0233 PQ: 0 ANSI: 0
[ 10.396344] sd 2:0:0:0: [sda] Attached SCSI removable disk
[ 10.398396] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 11.838747] logitech-hidpp-device 0003:046D:2011.000A: HID++ 1.0 device connected.
[ 14.266640] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 14.619243] Thunar[1699]: segfault at 18 ip 00007f61d7414db0 sp 00007ffd4fab9248 error 4 in libgtk-3.so.0.2402.0[7f61d71cf000+352000]
[ 14.619255] Code: dc ff 48 8b 44 24 08 64 48 33 04 25 28 00 00 00 75 0f 48 83 c4 18 5b 5d 41 5c 41 5d 41 5e 41 5f c3 e8 84 ee db ff 0f 1f 40 00 <48> 8b 47 18 48 8b 40 10 c3 0f 1f 80 00 00 00 00 53 48 8b 5f 18 48
[ 15.667597] psmouse serio1: Failed to deactivate mouse on isa0060/serio1: -5
[ 16.155624] psmouse serio1: Failed to enable mouse on isa0060/serio1
[ 17.015827] usb 1-2.1: reset high-speed USB device number 5 using xhci_hcd
[ 18.275627] Bluetooth: RFCOMM TTY layer initialized
[ 18.275632] Bluetooth: RFCOMM socket layer initialized
[ 18.275637] Bluetooth: RFCOMM ver 1.11
[ 20.435775] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input2
[ 20.582024] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 20.639623] psmouse serio1: Failed to enable mouse on isa0060/serio1
[ 20.678651] brcmfmac: brcmf_inetaddr_changed: fail to get arp ip table err:-52
** Model information
sys_vendor: Dell Inc.
product_name: XPS 15 9550
product_version:
chassis_vendor: Dell Inc.
chassis_version:
bios_vendor: Dell Inc.
bios_version: 01.01.19
board_vendor: Dell Inc.
board_name: 0N7TVV
board_version: A00
** Loaded modules:
rfcomm
sg
sd_mod
uas
usb_storage
fuse
nf_conntrack_netlink
xfrm_user
xfrm_algo
xt_addrtype
br_netfilter
bridge
stp
llc
overlay
pci_stub
vboxpci(OE)
vboxnetadp(OE)
vboxnetflt(OE)
vboxdrv(OE)
nft_chain_nat_ipv4
ipt_MASQUERADE
xt_state
xt_conntrack
ipt_REJECT
nf_reject_ipv4
nft_counter
xt_tcpudp
nft_compat
nf_tables
nfnetlink
nf_nat_h323
nf_conntrack_h323
nf_nat_pptp
nf_nat_proto_gre
nf_conntrack_pptp
nf_conntrack_proto_gre
nf_nat_tftp
nf_conntrack_tftp
nf_nat_sip
nf_conntrack_sip
nf_nat_irc
nf_conntrack_irc
nf_nat_ftp
nf_conntrack_ftp
iptable_nat
nf_nat_ipv4
nf_nat
nf_conntrack
nf_defrag_ipv6
nf_defrag_ipv4
libcrc32c
cmac
hid_logitech_hidpp
snd_hda_codec_hdmi
bnep
btusb
btrtl
btbcm
btintel
bluetooth
snd_hda_codec_realtek
drbg
snd_usb_audio
snd_hda_codec_generic
uvcvideo
videobuf2_vmalloc
ansi_cprng
videobuf2_memops
snd_usbmidi_lib
videobuf2_v4l2
snd_rawmidi
snd_seq_device
videobuf2_common
ecdh_generic
videodev
hid_logitech_dj
media
bbswitch(OE)
cdc_ether
usbnet
r8152
mii
joydev
binfmt_misc
intel_rapl
x86_pkg_temp_thermal
wmi_bmof
dell_wmi
mxm_wmi
intel_powerclamp
kvm_intel
kvm
irqbypass
dell_laptop
crct10dif_pclmul
crc32_pclmul
dell_smbios
dell_wmi_descriptor
ghash_clmulni_intel
hid_multitouch
evdev
dcdbas
serio_raw
intel_cstate
i915
snd_hda_intel
brcmfmac
snd_hda_codec
brcmutil
snd_hda_core
intel_uncore
snd_hwdep
cfg80211
snd_pcm
intel_rapl_perf
snd_timer
rtsx_pci_ms
iTCO_wdt
snd
iTCO_vendor_support
drm_kms_helper
memstick
rfkill
soundcore
pcspkr
drm
mei_me
idma64
tpm_tis
tpm_tis_core
mei
tpm
processor_thermal_device
intel_pch_thermal
i2c_algo_bit
intel_soc_dts_iosf
rng_core
battery
int3403_thermal
wmi
video
int3402_thermal
int340x_thermal_zone
ac
intel_hid
int3400_thermal
acpi_thermal_rel
acpi_pad
sparse_keymap
button
pcc_cpufreq
coretemp
parport_pc
ppdev
lp
parport
ip_tables
x_tables
autofs4
usbhid
ext4
crc16
mbcache
jbd2
crc32c_generic
fscrypto
ecb
dm_mod
hid_generic
crc32c_intel
rtsx_pci_sdmmc
mmc_core
ahci
libahci
nvme
xhci_pci
libata
aesni_intel
xhci_hcd
aes_x86_64
crypto_simd
psmouse
cryptd
glue_helper
usbcore
scsi_mod
nvme_core
i2c_i801
rtsx_pci
i2c_hid
intel_lpss_pci
usb_common
intel_lpss
hid
thermal
fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Skylake Host Bridge/DRAM Registers [8086:1910] (rev 07)
Subsystem: Dell Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Host Bridge/DRAM Registers (XPS 15 9550) [1028:06e4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: skl_uncore
00:01.0 PCI bridge [0604]: Intel Corporation Skylake PCIe Controller (x16) [8086:1901] (rev 07) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: dc000000-dd0fffff
Prefetchable memory behind bridge: 00000000b0000000-00000000c1ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:02.0 VGA compatible controller [0300]: Intel Corporation HD Graphics 530 [8086:191b] (rev 06) (prog-if 00 [VGA controller])
Subsystem: Dell HD Graphics 530 (XPS 15 9550) [1028:06e4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 136
Region 0: Memory at db000000 (64-bit, non-prefetchable) [size=16M]
Region 2: Memory at 70000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:04.0 Signal processing controller [1180]: Intel Corporation Skylake Processor Thermal Subsystem [8086:1903] (rev 07)
Subsystem: Dell Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem (XPS 15 9550) [1028:06e4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at dd120000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: proc_thermal
Kernel modules: processor_thermal_device
00:14.0 USB controller [0c03]: Intel Corporation Sunrise Point-H USB 3.0 xHCI Controller [8086:a12f] (rev 31) (prog-if 30 [XHCI])
Subsystem: Dell 100 Series/C230 Series Chipset Family USB 3.0 xHCI Controller (XPS 15 9550) [1028:06e4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 123
Region 0: Memory at dd110000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:14.2 Signal processing controller [1180]: Intel Corporation Sunrise Point-H Thermal subsystem [8086:a131] (rev 31)
Subsystem: Dell 100 Series/C230 Series Chipset Family Thermal Subsystem (XPS 15 9550) [1028:06e4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at dd138000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel_pch_thermal
Kernel modules: intel_pch_thermal
00:15.0 Signal processing controller [1180]: Intel Corporation Sunrise Point-H Serial IO I2C Controller #0 [8086:a160] (rev 31)
Subsystem: Dell 100 Series/C230 Series Chipset Family Serial IO I2C Controller [1028:06e4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at dd137000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel-lpss
Kernel modules: intel_lpss_pci
00:15.1 Signal processing controller [1180]: Intel Corporation Sunrise Point-H Serial IO I2C Controller #1 [8086:a161] (rev 31)
Subsystem: Dell 100 Series/C230 Series Chipset Family Serial IO I2C Controller [1028:06e4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 128 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at dd136000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel-lpss
Kernel modules: intel_lpss_pci
00:16.0 Communication controller [0780]: Intel Corporation Sunrise Point-H CSME HECI #1 [8086:a13a] (rev 31)
Subsystem: Dell 100 Series/C230 Series Chipset Family MEI Controller [1028:06e4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 135
Region 0: Memory at dd135000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:17.0 RAID bus controller [0104]: Intel Corporation 82801 Mobile SATA Controller [RAID mode] [8086:282a] (rev 31)
Subsystem: Dell 82801 Mobile SATA Controller [RAID mode] [1028:06e4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 125
Region 0: Memory at dd130000 (32-bit, non-prefetchable) [size=8K]
Region 1: Memory at dd134000 (32-bit, non-prefetchable) [size=256]
Region 2: I/O ports at f090 [size=8]
Region 3: I/O ports at f080 [size=4]
Region 4: I/O ports at f060 [size=32]
Region 5: Memory at dd133000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1c.0 PCI bridge [0604]: Intel Corporation Sunrise Point-H PCI Express Root Port #1 [8086:a110] (rev f1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: dd400000-dd8fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation Sunrise Point-H PCI Express Root Port #2 [8086:a111] (rev f1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: dda00000-de3fffff
Prefetchable memory behind bridge: 00000000c2100000-00000000c2afffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 PCI bridge [0604]: Intel Corporation Sunrise Point-H PCI Express Root Port #9 [8086:a118] (rev f1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: de400000-de4fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.4 PCI bridge [0604]: Intel Corporation Sunrise Point-H PCI Express Root Port #13 [8086:a11c] (rev f1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.6 PCI bridge [0604]: Intel Corporation Sunrise Point-H PCI Express Root Port #15 [8086:a11e] (rev f1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Bus: primary=00, secondary=06, subordinate=3e, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: c4000000-da0fffff
Prefetchable memory behind bridge: 0000000080000000-00000000a1ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1f.0 ISA bridge [0601]: Intel Corporation Sunrise Point-H LPC Controller [8086:a14e] (rev 31)
Subsystem: Dell HM170 Chipset LPC/eSPI Controller (XPS 15 9550) [1028:06e4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.2 Memory controller [0580]: Intel Corporation Sunrise Point-H PMC [8086:a121] (rev 31)
Subsystem: Dell 100 Series/C230 Series Chipset Family Power Management Controller (XPS 15 9550) [1028:06e4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at dd12c000 (32-bit, non-prefetchable) [size=16K]
00:1f.3 Audio device [0403]: Intel Corporation Sunrise Point-H HD Audio [8086:a170] (rev 31) (prog-if 80)
Subsystem: Dell 100 Series/C230 Series Chipset Family HD Audio Controller [1028:06e4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 138
Region 0: Memory at dd128000 (64-bit, non-prefetchable) [size=16K]
Region 4: Memory at dd100000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1f.4 SMBus [0c05]: Intel Corporation Sunrise Point-H SMBus [8086:a123] (rev 31)
Subsystem: Dell 100 Series/C230 Series Chipset Family SMBus (XPS 15 9550) [1028:06e4]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
Region 0: Memory at dd132000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
01:00.0 3D controller [0302]: NVIDIA Corporation GM107M [GeForce GTX 960M] [10de:139b] (rev ff) (prog-if ff)
!!! Unknown header type 7f
Kernel modules: nvidia
02:00.0 Network controller [0280]: Broadcom Limited BCM43602 802.11ac Wireless LAN SoC [14e4:43ba] (rev 01)
Subsystem: Dell BCM43602 802.11ac Wireless LAN SoC [1028:0024]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 137
Region 0: Memory at dd800000 (64-bit, non-prefetchable) [size=32K]
Region 2: Memory at dd400000 (64-bit, non-prefetchable) [size=4M]
Capabilities: <access denied>
Kernel driver in use: brcmfmac
Kernel modules: brcmfmac
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS525A PCI Express Card Reader [10ec:525a] (rev 01)
Subsystem: Dell RTS525A PCI Express Card Reader (XPS 15 9550) [1028:06e4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 122
Region 1: Memory at dda00000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: rtsx_pci
Kernel modules: rtsx_pci
04:00.0 Non-Volatile memory controller [0108]: Samsung Electronics Co Ltd NVMe SSD Controller [144d:a802] (rev 01) (prog-if 02 [NVM Express])
Subsystem: Samsung Electronics Co Ltd NVMe SSD Controller SM951/PM951 [144d:a801]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
NUMA node: 0
Region 0: Memory at de400000 (64-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at c000 [size=256]
Capabilities: <access denied>
Kernel driver in use: nvme
Kernel modules: nvme
06:00.0 PCI bridge [0604]: Intel Corporation DSL6340 Thunderbolt 3 Bridge [Alpine Ridge 2C 2015] [8086:1576] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 18
Bus: primary=06, secondary=07, subordinate=3e, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: c4000000-da0fffff
Prefetchable memory behind bridge: 0000000080000000-00000000a1ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
07:00.0 PCI bridge [0604]: Intel Corporation DSL6340 Thunderbolt 3 Bridge [Alpine Ridge 2C 2015] [8086:1576] (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 18
Bus: primary=07, secondary=08, subordinate=08, sec-latency=0
Memory behind bridge: da000000-da0fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
07:01.0 PCI bridge [0604]: Intel Corporation DSL6340 Thunderbolt 3 Bridge [Alpine Ridge 2C 2015] [8086:1576] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 19
Bus: primary=07, secondary=09, subordinate=3d, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: c4000000-d9efffff
Prefetchable memory behind bridge: 0000000080000000-00000000a1ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
07:02.0 PCI bridge [0604]: Intel Corporation DSL6340 Thunderbolt 3 Bridge [Alpine Ridge 2C 2015] [8086:1576] (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 16
Bus: primary=07, secondary=3e, subordinate=3e, sec-latency=0
Memory behind bridge: d9f00000-d9ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
3e:00.0 USB controller [0c03]: Intel Corporation DSL6340 USB 3.1 Controller [Alpine Ridge] [8086:15b5] (prog-if 30 [XHCI])
Subsystem: Device [2222:1111]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 126
Region 0: Memory at d9f00000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
** USB devices:
Bus 004 Device 003: ID 0bda:8153 Realtek Semiconductor Corp.
Bus 004 Device 002: ID 2109:0813 VIA Labs, Inc.
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 006: ID 2109:0100 VIA Labs, Inc.
Bus 003 Device 005: ID 05e3:0752 Genesys Logic, Inc.
Bus 003 Device 004: ID 05e3:0618 Genesys Logic, Inc.
Bus 003 Device 003: ID 1050:0116 Yubico.com Yubikey NEO(-N) OTP+U2F+CCID
Bus 003 Device 002: ID 2109:2813 VIA Labs, Inc.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 0424:5537 Standard Microsystems Corp.
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 0a5c:6410 Broadcom Corp.
Bus 001 Device 008: ID 04d8:0b2a Microchip Technology, Inc.
Bus 001 Device 007: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 001 Device 005: ID 046d:0823 Logitech, Inc.
Bus 001 Device 003: ID 0424:2137 Standard Microsystems Corp.
Bus 001 Device 006: ID 0c45:6713 Microdia
Bus 001 Device 002: ID 1050:0407 Yubico.com
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: buster/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 4.19.0-1-amd64 (SMP w/8 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-4.19.0-1-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.132
ii kmod 25-2
ii linux-base 4.5
Versions of packages linux-image-4.19.0-1-amd64 recommends:
ii apparmor 2.13.1-3+b1
ii firmware-linux-free 3.4
ii irqbalance 1.5.0-0.1
Versions of packages linux-image-4.19.0-1-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02+dfsg1-9
pn linux-doc-4.19 <none>
Versions of packages linux-image-4.19.0-1-amd64 is related to:
ii firmware-amd-graphics 20180825+dfsg-1
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
ii firmware-brcm80211 20180825+dfsg-1
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux-nonfree 20180825+dfsg-1
ii firmware-misc-nonfree 20180825+dfsg-1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
--- End Message ---