[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#899301: marked as done (linux-image-4.16.0-1-amd64: kernel crash more times a month, irreproducibly, does not dump)



Your message dated Sat, 26 Nov 2022 20:45:38 +0100 (CET)
with message-id <20221126194538.55263BE2DE0@eldamar.lan>
and subject line Closing this bug (BTS maintenance for src:linux bugs)
has caused the Debian Bug report #899301,
regarding linux-image-4.16.0-1-amd64: kernel crash more times a month, irreproducibly, does not dump
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
899301: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=899301
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: src:linux
Version: 4.16.5-1
Severity: important

Dear Maintainer,
kernel crashes in different conditions, sometimes while I am not using the laptop.
I did a full scan of the memories several times and all seems fine.
I did not manage to obtain a crash log either,
My configuration is:
root@mozart:/etc# kdump-config  show
DUMP_MODE:        kdump
USE_KDUMP:        1
KDUMP_SYSCTL:     kernel.panic_on_oops=1
KDUMP_COREDIR:    /var/crash
crashkernel addr: 0x2d000000
   /var/lib/kdump/vmlinuz: symbolic link to /boot/vmlinuz-4.16.0-1-amd64
kdump initrd: 
   /var/lib/kdump/initrd.img: symbolic link to /var/lib/kdump/initrd.img-4.16.0-1-amd64
current state:    ready to kdump

kexec command:
  /sbin/kexec -p --command-line="BOOT_IMAGE=/boot/vmlinuz-4.16.0-1-amd64 root=UUID=25ddc407-30ce-4dc1-8e68-11b7d4316955 ro quiet nr_cpus=1 systemd.unit=kdump-tools.service irqpoll nousb ata_piix.prefer_ms_hyperv=0" --initrd=/var/lib/kdump/initrd.img /var/lib/kdump/vmlinuz

Any suggestion is welcome.
Thank you
best regards
Fulvio Ciriaco


-- Package-specific info:
** Version:
Linux version 4.16.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 7.3.0 (Debian 7.3.0-17)) #1 SMP Debian 4.16.5-1 (2018-04-29)

** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.16.0-1-amd64 root=UUID=25ddc407-30ce-4dc1-8e68-11b7d4316955 ro quiet crashkernel=384M-:128M crashkernel=384M-:128M crashkernel=384M-:128M crashkernel=384M-:128M

** Tainted: C (1024)
 * Module from drivers/staging has been loaded.

** Kernel log:
[  537.263770] pci_bus 0000:01: Allocating resources
[  537.265455] acpi PNP0401:00: Already enumerated
[  537.269554] acpi PNP0501:00: Still not present
[  537.279064] PM: suspend exit
[  537.344809] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[  537.344823] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[  537.344992] IPv6: ADDRCONF(NETDEV_UP): wlp3s0b1: link is not ready
[  537.841937] e1000e: eno1 NIC Link is Down
[  537.842712] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[  538.107170] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[  538.111344] IPv6: ADDRCONF(NETDEV_UP): wlp3s0b1: link is not ready
[  538.199163] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[  538.199177] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[  538.199324] IPv6: ADDRCONF(NETDEV_UP): wlp3s0b1: link is not ready
[  538.247324] IPv6: ADDRCONF(NETDEV_UP): wlp3s0b1: link is not ready
[  557.044595] e1000e: eno1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[  557.044601] e1000e 0000:00:19.0 eno1: 10/100 speed: disabling TSO
[  557.044640] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[  882.152570] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[  882.152602] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[  882.152879] IPv6: ADDRCONF(NETDEV_UP): wlp3s0b1: link is not ready
[  947.095540] usb 1-1: new high-speed USB device number 3 using xhci_hcd
[  947.247720] usb 1-1: New USB device found, idVendor=048d, idProduct=1167
[  947.247739] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  947.247743] usb 1-1: Product: USB Mass Storage Device
[  947.247747] usb 1-1: Manufacturer: iTE Tech
[  947.247751] usb 1-1: SerialNumber: 11042619006161
[  947.350334] usb-storage 1-1:1.0: USB Mass Storage device detected
[  947.350610] scsi host6: usb-storage 1-1:1.0
[  947.350704] usbcore: registered new interface driver usb-storage
[  947.359946] usbcore: registered new interface driver uas
[  948.356972] scsi 6:0:0:0: Direct-Access                               0.00 PQ: 0 ANSI: 2
[  948.357752] sd 6:0:0:0: Attached scsi generic sg2 type 0
[  948.358475] sd 6:0:0:0: [sdb] 7892992 512-byte logical blocks: (4.04 GB/3.76 GiB)
[  948.358605] sd 6:0:0:0: [sdb] Write Protect is off
[  948.358607] sd 6:0:0:0: [sdb] Mode Sense: 00 00 00 00
[  948.358768] sd 6:0:0:0: [sdb] Asking for cache data failed
[  948.358773] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[  948.361394]  sdb:
[  948.370252] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[  954.153651] UDF-fs: warning (device sdb): udf_load_vrs: No VRS found
[  954.153655] UDF-fs: Scanning with blocksize 512 failed
[  954.154188] UDF-fs: warning (device sdb): udf_load_vrs: No VRS found
[  954.154191] UDF-fs: Scanning with blocksize 1024 failed
[  954.154709] UDF-fs: warning (device sdb): udf_load_vrs: No VRS found
[  954.154712] UDF-fs: Scanning with blocksize 2048 failed
[  954.155853] UDF-fs: warning (device sdb): udf_load_vrs: No VRS found
[  954.155857] UDF-fs: Scanning with blocksize 4096 failed
[  954.165333] UDF-fs: warning (device sdb): udf_load_vrs: No VRS found
[  954.165339] UDF-fs: Scanning with blocksize 512 failed
[  954.166069] UDF-fs: warning (device sdb): udf_load_vrs: No VRS found
[  954.166072] UDF-fs: Scanning with blocksize 1024 failed
[  954.166759] UDF-fs: warning (device sdb): udf_load_vrs: No VRS found
[  954.166762] UDF-fs: Scanning with blocksize 2048 failed
[  954.167637] UDF-fs: warning (device sdb): udf_load_vrs: No VRS found
[  954.167641] UDF-fs: Scanning with blocksize 4096 failed
[  954.270957] ISOFS: Unable to identify CD-ROM format.
[  954.361096] ISOFS: Unable to identify CD-ROM format.
[ 1005.907160] usb 1-1: USB disconnect, device number 3
[ 1197.152212] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 1197.152232] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[ 1197.152444] IPv6: ADDRCONF(NETDEV_UP): wlp3s0b1: link is not ready
[ 1512.148115] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 1512.148131] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[ 1512.148315] IPv6: ADDRCONF(NETDEV_UP): wlp3s0b1: link is not ready
[ 1827.134020] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 1827.134041] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[ 1827.134274] IPv6: ADDRCONF(NETDEV_UP): wlp3s0b1: link is not ready
[ 2142.069322] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 2142.069335] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[ 2142.069509] IPv6: ADDRCONF(NETDEV_UP): wlp3s0b1: link is not ready
[ 2457.077873] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 2457.077899] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[ 2457.078154] IPv6: ADDRCONF(NETDEV_UP): wlp3s0b1: link is not ready
[ 2538.203855] usb 1-2: new high-speed USB device number 4 using xhci_hcd
[ 2538.356261] usb 1-2: New USB device found, idVendor=048d, idProduct=1167
[ 2538.356269] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2538.356274] usb 1-2: Product: USB Mass Storage Device
[ 2538.356278] usb 1-2: Manufacturer: iTE Tech
[ 2538.356282] usb 1-2: SerialNumber: 11042619006161
[ 2538.357361] usb-storage 1-2:1.0: USB Mass Storage device detected
[ 2538.357688] scsi host6: usb-storage 1-2:1.0
[ 2539.389118] scsi 6:0:0:0: Direct-Access                               0.00 PQ: 0 ANSI: 2
[ 2539.390495] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 2539.390909] sd 6:0:0:0: [sdb] 7892992 512-byte logical blocks: (4.04 GB/3.76 GiB)
[ 2539.391083] sd 6:0:0:0: [sdb] Write Protect is off
[ 2539.391091] sd 6:0:0:0: [sdb] Mode Sense: 00 00 00 00
[ 2539.391282] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 2539.391307] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2539.398020]  sdb:
[ 2539.406651] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 2772.093216] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 2772.093245] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[ 2772.093493] IPv6: ADDRCONF(NETDEV_UP): wlp3s0b1: link is not ready
[ 3087.044009] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 3087.044024] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[ 3087.044172] IPv6: ADDRCONF(NETDEV_UP): wlp3s0b1: link is not ready
[ 3402.042033] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 3402.042061] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[ 3402.042311] IPv6: ADDRCONF(NETDEV_UP): wlp3s0b1: link is not ready

** Model information
sys_vendor: Dell Inc.
product_name: Precision M4600
product_version: 01
chassis_vendor: Dell Inc.
chassis_version: 
bios_vendor: Dell Inc.
bios_version: A08
board_vendor: Dell Inc.
board_name: 08V9YG
board_version: A00

** Loaded modules:
nls_iso8859_1
nls_cp437
vfat
fat
isofs
nls_utf8
udf
uas
usb_storage
fuse
appletalk
ax25
ipx(C)
p8023
p8022
psnap
llc
snd_hrtimer
snd_seq
snd_seq_device
bnep
binfmt_misc
arc4
brcmsmac
uvcvideo
cordic
brcmutil
b43
videobuf2_vmalloc
mac80211
videobuf2_memops
videobuf2_v4l2
cfg80211
videobuf2_common
videodev
ssb
media
dell_rbtn
snd_hda_codec_hdmi
pcmcia
intel_rapl
pcmcia_core
rng_core
x86_pkg_temp_thermal
intel_powerclamp
dell_laptop
coretemp
dell_wmi
dell_smbios
wmi_bmof
iTCO_wdt
iTCO_vendor_support
dcdbas
sparse_keymap
kvm_intel
dell_smm_hwmon
dell_wmi_descriptor
btusb
kvm
btrtl
btbcm
btintel
irqbypass
bluetooth
crct10dif_pclmul
crc32_pclmul
ghash_clmulni_intel
snd_hda_codec_idt
snd_hda_codec_generic
drbg
intel_cstate
intel_uncore
intel_rapl_perf
nouveau
snd_hda_intel
mxm_wmi
snd_hda_codec
ttm
snd_hda_core
drm_kms_helper
snd_hwdep
drm
snd_pcm
pcspkr
ansi_cprng
joydev
ecdh_generic
snd_timer
i2c_algo_bit
evdev
rfkill
serio_raw
bcma
snd
soundcore
wmi
battery
video
shpchp
lpc_ich
sg
ac
mei_me
mei
dell_smo8800
button
parport_pc
ppdev
lp
parport
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
fscrypto
ecb
btrfs
crc32c_generic
xor
zstd_decompress
zstd_compress
xxhash
raid6_pq
sr_mod
sd_mod
cdrom
hid_generic
usbhid
hid
crc32c_intel
aesni_intel
aes_x86_64
crypto_simd
ahci
cryptd
glue_helper
libahci
i2c_i801
psmouse
libata
firewire_ohci
scsi_mod
sdhci_pci
xhci_pci
cqhci
ehci_pci
sdhci
xhci_hcd
ehci_hcd
firewire_core
crc_itu_t
mmc_core
usbcore
e1000e
usb_common
thermal

** Network interface configuration:

source /etc/network/interfaces.d/*

auto lo
iface lo inet loopback


** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eno1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether d0:67:e5:47:b0:0d brd ff:ff:ff:ff:ff:ff
    inet 193.204.182.180/25 brd 193.204.182.255 scope global noprefixroute eno1
       valid_lft forever preferred_lft forever
    inet6 fe80::a80a:ac19:ce68:8ad4/64 scope link noprefixroute 
       valid_lft forever preferred_lft forever
3: wlp3s0b1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000
    link/ether 0e:f5:f7:46:be:79 brd ff:ff:ff:ff:ff:ff

*** Device statistics:
Inter-|   Receive                                                |  Transmit
 face |bytes    packets errs drop fifo frame compressed multicast|bytes    packets errs drop fifo colls carrier compressed
wlp3s0b1:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0
    lo:  118668    1472    0    0    0     0          0         0   118668    1472    0    0    0     0       0          0
  eno1: 23588535  213614    0    0    0     0          0      2310 27168325   29169    0    0    0     0       0          0

*** Protocol statistics:
Ip:
    Forwarding: 2
    33545 total packets received
    5174 with invalid addresses
    0 forwarded
    0 incoming packets discarded
    28371 incoming packets delivered
    15152 requests sent out
    362 outgoing packets dropped
    4 dropped because of missing route
Icmp:
    737 ICMP messages received
    0 input ICMP message failed
    ICMP input histogram:
        destination unreachable: 732
        echo requests: 5
    741 ICMP messages sent
    0 ICMP messages failed
    ICMP output histogram:
        destination unreachable: 736
        echo replies: 5
IcmpMsg:
        InType3: 732
        InType8: 5
        OutType0: 5
        OutType3: 736
Tcp:
    586 active connection openings
    21 passive connection openings
    6 failed connection attempts
    6 connection resets received
    1 connections established
    16242 segments received
    27663 segments sent out
    330 segments retransmitted
    7 bad segments received
    261 resets sent
Udp:
    2405 packets received
    736 packets to unknown port received
    2 packet receive errors
    1833 packets sent
    0 receive buffer errors
    0 send buffer errors
    InCsumErrors: 2
    IgnoredMulti: 8199
UdpLite:
TcpExt:
    4 resets received for embryonic SYN_RECV sockets
    245 TCP sockets finished time wait in fast timer
    314 delayed acks sent
    Quick ack mode was activated 4 times
    4091 packet headers predicted
    2555 acknowledgments not containing data payload received
    6849 predicted acknowledgments
    TCPSackRecovery: 2
    Detected reordering 6 times using SACK
    Detected reordering 2 times using time stamp
    2 congestion windows partially recovered using Hoe heuristic
    1 congestion windows recovered without slow start after partial ack
    TCPTimeouts: 79
    TCPLossProbes: 17
    TCPLossProbeRecovery: 2
    TCPDSACKOldSent: 4
    TCPDSACKRecv: 1
    78 connections reset due to unexpected data
    5 connections reset due to early user close
    3 connections aborted due to timeout
    TCPSackShifted: 1
    TCPSackMerged: 2
    TCPSackShiftFallback: 12
    TCPRcvCoalesce: 2336
    TCPOFOQueue: 160
    TCPChallengeACK: 18
    TCPSYNChallenge: 18
    TCPAutoCorking: 24
    TCPSynRetrans: 288
    TCPOrigDataSent: 20224
    TCPHystartTrainDetect: 1
    TCPHystartTrainCwnd: 16
    TCPKeepAlive: 1028
IpExt:
    InMcastPkts: 1408
    OutMcastPkts: 42
    InBcastPkts: 8200
    OutBcastPkts: 18
    InOctets: 11375329
    OutOctets: 25940646
    InMcastOctets: 223087
    OutMcastOctets: 9857
    InBcastOctets: 1609992
    OutBcastOctets: 852
    InNoECTPkts: 35383


** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09)
	Subsystem: Dell Precision M4600 [1028:04a3]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0101] (rev 09) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 16
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 00007000-00007fff
	Memory behind bridge: dc000000-dd0fffff
	Prefetchable memory behind bridge: 00000000d0000000-00000000d9ffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
	Subsystem: Dell Precision M4600 [1028:04a3]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 25
	Region 0: Memory at deeb0000 (64-bit, non-prefetchable) [size=16]
	Capabilities: <access denied>
	Kernel driver in use: mei_me
	Kernel modules: mei_me

00:19.0 Ethernet controller [0200]: Intel Corporation 82579LM Gigabit Network Connection [8086:1502] (rev 04)
	Subsystem: Dell Precision M4600 [1028:04a3]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 33
	Region 0: Memory at dee00000 (32-bit, non-prefetchable) [size=128K]
	Region 1: Memory at dee80000 (32-bit, non-prefetchable) [size=4K]
	Region 2: I/O ports at 8040 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: e1000e
	Kernel modules: e1000e

00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 04) (prog-if 20 [EHCI])
	Subsystem: Dell Precision M4600 [1028:04a3]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at dee70000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci
	Kernel modules: ehci_pci

00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 04)
	Subsystem: Dell Precision M4600 [1028:04a3]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 32
	Region 0: Memory at dee60000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel

00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b4) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 16
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 [8086:1c12] (rev b4) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 17
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	Memory behind bridge: ded00000-dedfffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:1c.2 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 [8086:1c14] (rev b4) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin C routed to IRQ 18
	Bus: primary=00, secondary=04, subordinate=09, sec-latency=0
	I/O behind bridge: 00006000-00006fff
	Memory behind bridge: de200000-debfffff
	Prefetchable memory behind bridge: 00000000db200000-00000000dbbfffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 [8086:1c16] (rev b4) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin D routed to IRQ 19
	Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=0
	Memory behind bridge: dec00000-decfffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:1c.7 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 [8086:1c1e] (rev b4) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin D routed to IRQ 19
	Bus: primary=00, secondary=0b, subordinate=12, sec-latency=0
	I/O behind bridge: 00002000-00005fff
	Memory behind bridge: dd100000-de1fffff
	Prefetchable memory behind bridge: 00000000da100000-00000000db1fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 04) (prog-if 20 [EHCI])
	Subsystem: Dell Precision M4600 [1028:04a3]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 17
	Region 0: Memory at dee50000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci
	Kernel modules: ehci_pci

00:1f.0 ISA bridge [0601]: Intel Corporation QM67 Express Chipset Family LPC Controller [8086:1c4f] (rev 04)
	Subsystem: Dell Precision M4600 [1028:04a3]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel driver in use: lpc_ich
	Kernel modules: lpc_ich

00:1f.2 RAID bus controller [0104]: Intel Corporation 82801 Mobile SATA Controller [RAID mode] [8086:282a] (rev 04)
	Subsystem: Dell 82801 Mobile SATA Controller [RAID mode] [1028:04a3]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 31
	Region 0: I/O ports at 8090 [size=8]
	Region 1: I/O ports at 8080 [size=4]
	Region 2: I/O ports at 8070 [size=8]
	Region 3: I/O ports at 8060 [size=4]
	Region 4: I/O ports at 8020 [size=32]
	Region 5: Memory at dee40000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: <access denied>
	Kernel driver in use: ahci
	Kernel modules: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 04)
	Subsystem: Dell Precision M4600 [1028:04a3]
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin C routed to IRQ 18
	Region 0: Memory at dee30000 (64-bit, non-prefetchable) [disabled] [size=256]
	Region 4: I/O ports at 8000 [size=32]
	Kernel driver in use: i801_smbus
	Kernel modules: i2c_i801

01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF108GLM [Quadro 1000M] [10de:0dfa] (rev a1) (prog-if 00 [VGA controller])
	Subsystem: Dell GF108GLM [Quadro 1000M] [1028:04a3]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 34
	Region 0: Memory at dc000000 (32-bit, non-prefetchable) [size=16M]
	Region 1: Memory at d0000000 (64-bit, prefetchable) [size=128M]
	Region 3: Memory at d8000000 (64-bit, prefetchable) [size=32M]
	Region 5: I/O ports at 7000 [size=128]
	Expansion ROM at 000c0000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: nouveau
	Kernel modules: nouveau

01:00.1 Audio device [0403]: NVIDIA Corporation GF108 High Definition Audio Controller [10de:0bea] (rev a1)
	Subsystem: Dell GF108 High Definition Audio Controller [1028:04a3]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 17
	Region 0: Memory at dd080000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel

03:00.0 Network controller [0280]: Broadcom Limited BCM4313 802.11bgn Wireless Network Adapter [14e4:4727] (rev 01)
	Subsystem: Dell Inspiron M5010 / XPS 8300 [1028:0010]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 17
	Region 0: Memory at ded00000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: bcma-pci-bridge
	Kernel modules: bcma

0a:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 04) (prog-if 30 [XHCI])
	Subsystem: Dell Precision M4600 [1028:04a3]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 19
	Region 0: Memory at dec00000 (64-bit, non-prefetchable) [size=8K]
	Capabilities: <access denied>
	Kernel driver in use: xhci_hcd
	Kernel modules: xhci_pci

0b:00.0 FireWire (IEEE 1394) [0c00]: O2 Micro, Inc. OZ600 1394a-2000 Controller [1217:11f7] (rev 05) (prog-if 10 [OHCI])
	Subsystem: Dell Precision M4600 [1028:04a3]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 19
	Region 0: Memory at dd130000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: firewire_ohci
	Kernel modules: firewire_ohci

0b:00.1 SD Host controller [0805]: O2 Micro, Inc. OZ600RJ1/OZ900RJ1 SD/MMC Card Reader Controller [1217:8320] (rev 05) (prog-if 01)
	Subsystem: Dell Precision M4600 [1028:04a3]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 16
	Region 0: Memory at dd120000 (32-bit, non-prefetchable) [size=512]
	Capabilities: <access denied>
	Kernel driver in use: sdhci-pci
	Kernel modules: sdhci_pci

0b:00.2 Mass storage controller [0180]: O2 Micro, Inc. OZ600 MS/xD Controller [1217:8330] (rev 05)
	Subsystem: Dell Precision M4600 [1028:04a3]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin C routed to IRQ 10
	Region 0: Memory at dd110000 (32-bit, non-prefetchable) [size=1K]
	Region 2: Memory at dd100000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>


** USB devices:
Bus 004 Device 003: ID 0a5c:5800 Broadcom Corp. BCM5880 Secure Applications Processor
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 048d:1167 Integrated Technology Express, Inc. 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 004: ID 1bcf:280b Sunplus Innovation Technology Inc. 
Bus 003 Device 003: ID 413c:8187 Dell Computer Corp. DW375 Bluetooth Module
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: buster/sid
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: amd64 (x86_64)

Kernel: Linux 4.16.0-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=it_IT.UTF-8, LC_CTYPE=it_IT.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages linux-image-4.16.0-1-amd64 depends on:
ii  initramfs-tools [linux-initramfs-tool]  0.130
ii  kmod                                    25-1
ii  linux-base                              4.5

Versions of packages linux-image-4.16.0-1-amd64 recommends:
ii  apparmor             2.12-4
ii  firmware-linux-free  3.4
ii  irqbalance           1.3.0-0.1+b1

Versions of packages linux-image-4.16.0-1-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  grub-pc                 2.02+dfsg1-4
pn  linux-doc-4.16          <none>

Versions of packages linux-image-4.16.0-1-amd64 is related to:
ii  firmware-amd-graphics     20170823-1
pn  firmware-atheros          <none>
pn  firmware-bnx2             <none>
pn  firmware-bnx2x            <none>
ii  firmware-brcm80211        20170823-1
pn  firmware-cavium           <none>
pn  firmware-intel-sound      <none>
pn  firmware-intelwimax       <none>
pn  firmware-ipw2x00          <none>
pn  firmware-ivtv             <none>
pn  firmware-iwlwifi          <none>
pn  firmware-libertas         <none>
ii  firmware-linux-nonfree    20170823-1
ii  firmware-misc-nonfree     20170823-1
pn  firmware-myricom          <none>
pn  firmware-netxen           <none>
pn  firmware-qlogic           <none>
pn  firmware-realtek          <none>
pn  firmware-samsung          <none>
pn  firmware-siano            <none>
pn  firmware-ti-connectivity  <none>
pn  xen-hypervisor            <none>

-- debconf-show failed

--- End Message ---
--- Begin Message ---
Hi

This bug was filed for a very old kernel or the bug is old itself
without resolution.

If you can reproduce it with

- the current version in unstable/testing
- the latest kernel from backports

please reopen the bug, see https://www.debian.org/Bugs/server-control
for details.

Regards,
Salvatore

--- End Message ---

Reply to: