[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#896870: marked as done (linux-image-4.15.0-2-armmp-lpae: missing clock-frequency property)

Your message dated Sat, 26 Nov 2022 20:40:25 +0100 (CET)
with message-id <20221126194025.7C791BE2DE0@eldamar.lan>
and subject line Closing this bug (BTS maintenance for src:linux bugs)
has caused the Debian Bug report #896870,
regarding linux-image-4.15.0-2-armmp-lpae: missing clock-frequency property
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
896870: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=896870
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: src:linux
Version: 4.15.11-1
Severity: important

Dear Maintainer,

The kernel misses the transfer of the processor clock rate.


-- Package-specific info:
** Version:
Linux version 4.15.0-2-armmp-lpae (debian-kernel@lists.debian.org) (gcc version 7.3.0 (Debian 7.3.0-11)) #1 SMP Debian 4.15.11-1 (2018-03-20)

** Command line:
  console=ttyS0,115200 quiet

** Not tainted

** Kernel log:
Unable to read kernel log; any relevant messages should be attached

** Model information
Hardware	: Allwinner sun7i (A20) Family
Revision	: 0000
Device Tree model: Lamobo R1

** Loaded modules:
arc4
rtl8192cu
rtl_usb
rtl8192c_common
rtlwifi
mac80211
cfg80211
rfkill
evdev
sun4i_backend
ir_lirc_codec
axp20x_pek
sun4i_codec
axp20x_ac_power
axp20x_usb_power
lirc_dev
axp20x_adc
axp20x_battery
snd_soc_core
industrialio
snd_pcm_dmaengine
snd_pcm
sg
snd_timer
sun4i_ts
sunxi_cir
sun4i_ss
rc_core
snd
sun4i_drm_hdmi
nvmem_sunxi_sid
cec
soundcore
des_generic
sunxi_wdt
sun4i_drm
sun4i_tcon
drm_kms_helper
spi_sun4i
drm
leds_gpio
cpufreq_dt
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
fscrypto
ecb
sd_mod
b53_mdio
b53_common
dsa_core
bridge
stp
gpio_axp209
llc
axp20x_regulator
devlink
dwmac_sunxi
stmmac_platform
stmmac
i2c_mv64xxx
sunxi
ahci_sunxi
libahci_platform
libahci
libata
scsi_mod
ohci_platform
ohci_hcd
ehci_platform
phy_generic
ehci_hcd
musb_hdrc
phy_sun4i_usb
udc_core
usbcore
sunxi_mmc
usb_common

** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

source /etc/network/interfaces.d/*

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
allow-hotplug eth0
iface eth0 inet dhcp

** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
    link/ether 02:58:03:42:51:e1 brd ff:ff:ff:ff:ff:ff
    inet 141.46.136.41/24 brd 141.46.136.255 scope global eth0
       valid_lft forever preferred_lft forever
    inet6 fe80::58:3ff:fe42:51e1/64 scope link 
       valid_lft forever preferred_lft forever
3: lan2@eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 02:58:03:42:51:e1 brd ff:ff:ff:ff:ff:ff
4: lan3@eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 02:58:03:42:51:e1 brd ff:ff:ff:ff:ff:ff
5: lan4@eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 02:58:03:42:51:e1 brd ff:ff:ff:ff:ff:ff
6: wan@eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 02:58:03:42:51:e1 brd ff:ff:ff:ff:ff:ff
7: lan1@eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 02:58:03:42:51:e1 brd ff:ff:ff:ff:ff:ff
8: wlx28f366419551: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 28:f3:66:41:95:51 brd ff:ff:ff:ff:ff:ff

*** Device statistics:
Inter-|   Receive                                                |  Transmit
 face |bytes    packets errs drop fifo frame compressed multicast|bytes    packets errs drop fifo colls carrier compressed
  lan3:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0
    lo:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0
  lan2:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0
  lan1:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0
  lan4:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0
   wan:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0
wlx28f366419551:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0
  eth0: 45500566   38112    0    0    0     0          0         0   273032    1871    0    0    0     0       0          0


** PCI devices:

** USB devices:
Bus 003 Device 002: ID 0bda:8178 Realtek Semiconductor Corp. RTL8192CU 802.11n WLAN Adapter
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: buster/sid
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: armhf (armv7l)

Kernel: Linux 4.15.0-2-armmp-lpae (SMP w/2 CPU cores)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968), LANGUAGE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages linux-image-4.15.0-2-armmp-lpae depends on:
ii  initramfs-tools [linux-initramfs-tool]  0.130
ii  kmod                                    25-1
ii  linux-base                              4.5

Versions of packages linux-image-4.15.0-2-armmp-lpae recommends:
ii  apparmor             2.12-4
ii  firmware-linux-free  3.4
ii  irqbalance           1.3.0-0.1

Versions of packages linux-image-4.15.0-2-armmp-lpae suggests:
pn  debian-kernel-handbook  <none>
pn  linux-doc-4.15          <none>

Versions of packages linux-image-4.15.0-2-armmp-lpae is related to:
pn  firmware-amd-graphics     <none>
pn  firmware-atheros          <none>
pn  firmware-bnx2             <none>
pn  firmware-bnx2x            <none>
pn  firmware-brcm80211        <none>
pn  firmware-cavium           <none>
pn  firmware-intel-sound      <none>
pn  firmware-intelwimax       <none>
pn  firmware-ipw2x00          <none>
pn  firmware-ivtv             <none>
pn  firmware-iwlwifi          <none>
pn  firmware-libertas         <none>
pn  firmware-linux-nonfree    <none>
pn  firmware-misc-nonfree     <none>
pn  firmware-myricom          <none>
pn  firmware-netxen           <none>
pn  firmware-qlogic           <none>
pn  firmware-realtek          <none>
pn  firmware-samsung          <none>
pn  firmware-siano            <none>
pn  firmware-ti-connectivity  <none>
pn  xen-hypervisor            <none>

-- no debconf information

--- End Message ---
--- Begin Message --- 
Hi

This bug was filed for a very old kernel or the bug is old itself
without resolution.

If you can reproduce it with

- the current version in unstable/testing
- the latest kernel from backports

please reopen the bug, see https://www.debian.org/Bugs/server-control
for details.

Regards,
Salvatore

--- End Message ---
Reply to: