--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: sky2: cannot work with marvell 88e8057
- From: Mark Li <627753707@qq.com>
- Date: Sat, 17 Mar 2018 16:33:16 +0800
- Message-id: <152127559681.1286.15781716425285601036.reportbug@debian>
Package: src:linux
Version: 4.9.82-1+deb9u3
Severity: normal
File: sky2
Dear Maintainer,
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation?
* What exactly did you do (or not do) that was effective (or
ineffective)?
* What was the outcome of this action?
* What outcome did you expect instead?
*** End of the template - remove these template lines ***
-- Package-specific info:
** Version:
Linux version 4.9.0-6-686-pae (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1) ) #1 SMP Debian 4.9.82-1+deb9u3 (2018-03-02)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.9.0-6-686-pae root=UUID=940d9eaa-9474-470e-be22-7208f9826670 ro quiet
** Not tainted
** Kernel log:
[ 2.026149] usb usb4: SerialNumber: 0000:00:03.2
[ 2.026586] hub 4-0:1.0: USB hub found
[ 2.026620] hub 4-0:1.0: 2 ports detected
[ 2.140493] ata1.00: ATA-6: ST380011A, 8.01, max UDMA/100
[ 2.140500] ata1.00: 156301488 sectors, multi 16: LBA
[ 2.164462] ata1.00: configured for UDMA/100
[ 2.164885] scsi 0:0:0:0: Direct-Access ATA ST380011A 8.01 PQ: 0 ANSI: 5
[ 2.169556] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 2.169692] sd 0:0:0:0: [sda] Write Protect is off
[ 2.169698] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.169757] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.176069] tsc: Refined TSC clocksource calibration: 2800.098 MHz
[ 2.176080] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x285c9d8cb0a, max_idle_ns: 440795325745 ns
[ 2.196537] sda: sda1 sda2 < sda5 >
[ 2.197629] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.324831] sata_sis 0000:00:05.0: version 1.0
[ 2.325097] sata_sis 0000:00:05.0: Detected SiS 180/181/964 chipset in SATA mode
[ 2.332841] scsi host2: sata_sis
[ 2.335389] scsi host3: sata_sis
[ 2.335629] ata3: SATA max UDMA/133 cmd 0xe400 ctl 0xe000 bmdma 0xd400 irq 17
[ 2.335636] ata4: SATA max UDMA/133 cmd 0xdc00 ctl 0xd800 bmdma 0xd408 irq 17
[ 2.661711] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.813122] random: fast init done
[ 2.828157] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input2
[ 2.985305] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.049777] PM: Starting manual resume from disk
[ 3.049790] PM: Hibernation image partition 8:5 present
[ 3.049791] PM: Looking for hibernation image.
[ 3.050231] PM: Image not found (code -22)
[ 3.050235] PM: Hibernation image not present or could not be loaded.
[ 3.200159] clocksource: Switched to clocksource tsc
[ 3.487057] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 5.079669] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 5.231414] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 5.231848] systemd[1]: Detected architecture x86.
[ 5.253686] systemd[1]: Set hostname to <debian>.
[ 5.975449] random: crng init done
[ 7.551142] systemd[1]: Listening on Journal Socket.
[ 7.551622] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 7.551985] systemd[1]: Listening on Journal Audit Socket.
[ 7.552347] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 7.552426] systemd[1]: Reached target Remote File Systems.
[ 7.552484] systemd[1]: Reached target User and Group Name Lookups.
[ 7.553120] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 8.126982] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 8.275453] lp: driver loaded but no devices found
[ 8.513614] systemd-journald[170]: Received request to flush runtime journal from PID 1
[ 8.562383] ppdev: user-space parallel port driver
[ 8.582958] parport_pc 00:06: reported by Plug and Play ACPI
[ 8.583096] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 8.680327] lp0: using parport0 (interrupt-driven).
[ 11.184835] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 11.184849] ACPI: Power Button [PWRB]
[ 11.185019] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 11.185026] ACPI: Power Button [PWRF]
[ 11.416316] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 11.703567] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 11.723359] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 11.778828] [drm] Initialized
[ 12.020991] wmi: Mapper loaded
[ 12.037021] snd_intel8x0 0000:00:02.7: intel8x0_measure_ac97_clock: measured 59061 usecs (2841 samples)
[ 12.037028] snd_intel8x0 0000:00:02.7: clocking to 48000
[ 12.306607] nouveau 0000:01:00.0: NVIDIA NV34 (034200b1)
[ 12.398306] nouveau 0000:01:00.0: bios: version 04.34.20.87.00
[ 12.407978] agpgart-sis 0000:00:00.0: AGP 3.5 bridge
[ 12.407998] agpgart: systemd-udevd tried to set rate=x12. Setting to AGP3 x8 mode.
[ 12.408080] agpgart-sis 0000:00:00.0: putting AGP V3 device into 8x mode
[ 12.409072] nouveau 0000:01:00.0: putting AGP V3 device into 8x mode
[ 12.411461] nouveau 0000:01:00.0: tmr: unknown input clock freq
[ 12.414013] nouveau 0000:01:00.0: fb: 256 MiB DDR1
[ 12.423725] [TTM] Zone kernel: Available graphics memory: 254340 kiB
[ 12.423730] [TTM] Initializing pool allocator
[ 12.423743] [TTM] Initializing DMA pool allocator
[ 12.423800] nouveau 0000:01:00.0: DRM: VRAM: 255 MiB
[ 12.423803] nouveau 0000:01:00.0: DRM: GART: 64 MiB
[ 12.423809] nouveau 0000:01:00.0: DRM: BMP version 5.41
[ 12.423813] nouveau 0000:01:00.0: DRM: DCB version 2.2
[ 12.423818] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000300 000088b8
[ 12.423822] nouveau 0000:01:00.0: DRM: DCB outp 01: 02010310 000088b8
[ 12.423825] nouveau 0000:01:00.0: DRM: DCB outp 02: 01010312 00000000
[ 12.423829] nouveau 0000:01:00.0: DRM: DCB outp 03: 02020321 00000733
[ 12.423934] nouveau 0000:01:00.0: DRM: Loading NV17 power sequencing microcode
[ 12.428851] nouveau 0000:01:00.0: DRM: Saving VGA fonts
[ 12.478213] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 12.478218] [drm] Driver supports precise vblank timestamp query.
[ 12.482842] nouveau 0000:01:00.0: DRM: MM: using M2MF for buffer copies
[ 12.482870] nouveau 0000:01:00.0: DRM: Setting dpms mode 3 on TV encoder (output 3)
[ 12.596457] nouveau 0000:01:00.0: DRM: allocated 1280x1024 fb: 0x9000, bo da9c6c00
[ 12.599909] fbcon: nouveaufb (fb0) is primary device
[ 12.857988] Console: switching to colour frame buffer device 160x64
[ 12.859727] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 12.861753] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[ 14.552301] Adding 522236k swap on /dev/sda5. Priority:-1 extents:1 across:522236k FS
[ 24.671923] IPv6: ADDRCONF(NETDEV_UP): enp0s14: link is not ready
[ 24.673016] 8139too 0000:00:0e.0 enp0s14: link up, 100Mbps, full-duplex, lpa 0x43E1
[ 32.766539] fuse init (API version 7.26)
[ 108.614077] device enp0s14 entered promiscuous mode
[ 115.030314] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
[ 1081.973570] perf: interrupt took too long (2542 > 2500), lowering kernel.perf_event_max_sample_rate to 78500
[ 1324.633506] perf: interrupt took too long (3216 > 3177), lowering kernel.perf_event_max_sample_rate to 62000
** Model information
The module:sky2 cannot work well on Ethernet controler produced by Marvell,model:88E8057.
i can't find the 88E8057 in pcidatebase on wikipages,could some help me?
once i rebbot my computer,it will show disconnect .it will disconnect in anytime when i use broswer or other applications which need internet.
thank you!
** Loaded modules:
nf_conntrack_ipv4
nf_defrag_ipv4
xt_tcpudp
xt_connmark
nf_conntrack
iptable_filter
fuse
nouveau
mxm_wmi
wmi
video
intel_powerclamp
ttm
drm_kms_helper
drm
pcspkr
evdev
i2c_algo_bit
sg
serio_raw
snd_intel8x0
snd_ac97_codec
ac97_bus
shpchp
snd_pcm
snd_timer
snd
soundcore
button
binfmt_misc
parport_pc
ppdev
lp
parport
ip_tables
x_tables
autofs4
ext4
crc16
jbd2
crc32c_generic
fscrypto
ecb
xts
lrw
gf128mul
ablk_helper
cryptd
aes_i586
mbcache
sata_sis
sd_mod
ata_generic
ohci_pci
pata_sis
psmouse
ehci_pci
ohci_hcd
ehci_hcd
8139too
8139cp
mii
libata
usbcore
usb_common
scsi_mod
i2c_sis630
thermal
floppy
** Network interface configuration:
source /etc/network/interfaces.d/*
auto lo
iface lo inet loopback
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: enp0s14: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN group default qlen 1000
link/ether 00:14:2a:53:1f:26 brd ff:ff:ff:ff:ff:ff
inet 192.168.43.180/24 brd 192.168.43.255 scope global enp0s14
valid_lft forever preferred_lft forever
inet6 fe80::214:2aff:fe53:1f26/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 36233 71 0 0 0 0 0 0 36233 71 0 0 0 0 0 0
enp0s14: 5698179 54412 0 1202 0 0 0 0 736086 5439 0 0 0 0 0 0
*** Protocol statistics:
Ip:
Forwarding: 2
8662 total packets received
0 forwarded
2 with unknown protocol
0 incoming packets discarded
8641 incoming packets delivered
5447 requests sent out
296 outgoing packets dropped
Icmp:
0 ICMP messages received
0 input ICMP message failed
ICMP input histogram:
109 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 109
IcmpMsg:
OutType3: 109
Tcp:
226 active connection openings
3 passive connection openings
2 failed connection attempts
1 connection resets received
2 connections established
2729 segments received
2796 segments sent out
786 segments retransmitted
0 bad segments received
233 resets sent
Udp:
4206 packets received
136 packets to unknown port received
0 packet receive errors
1664 packets sent
0 receive buffer errors
0 send buffer errors
IgnoredMulti: 1231
UdpLite:
TcpExt:
37 TCP sockets finished time wait in fast timer
52 delayed acks sent
Quick ack mode was activated 7 times
24 packets directly queued to recvmsg prequeue
TCPDirectCopyFromPrequeue: 67
1192 packet headers predicted
426 acknowledgments not containing data payload received
219 predicted acknowledgments
1 congestion windows recovered without slow start after partial ack
TCPTimeouts: 143
TCPLossProbes: 8
TCPLossProbeRecovery: 4
TCPDSACKOldSent: 7
TCPDSACKRecv: 2
21 connections reset due to unexpected data
1 connections reset due to early user close
TCPDSACKIgnoredNoUndo: 2
TCPSackShiftFallback: 2
TCPRcvCoalesce: 150
TCPOFOQueue: 185
TCPAutoCorking: 4
TCPSynRetrans: 778
TCPOrigDataSent: 732
TCPKeepAlive: 149
IpExt:
InMcastPkts: 2228
OutMcastPkts: 29
InBcastPkts: 1295
InOctets: 2628613
OutOctets: 688192
InMcastOctets: 701320
OutMcastOctets: 2805
InBcastOctets: 121650
InNoECTPkts: 8661
InECT0Pkts: 1
** PCI devices:
00:00.0 Host bridge [0600]: Silicon Integrated Systems [SiS] 661FX/M661FX/M661MX Host [1039:0661] (rev 11)
Subsystem: Elitegroup Computer Systems 661FX/M661FX/M661MX Host [1019:1b30]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 32
Region 0: Memory at c0000000 (32-bit, non-prefetchable) [size=64M]
Capabilities: [c0] AGP version 3.5
Status: RQ=32 Iso- ArqSz=2 Cal=3 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3+ Rate=x4,x8
Command: RQ=1 ArqSz=0 Cal=3 SBA+ AGP+ GART64- 64bit- FW- Rate=x8
Kernel driver in use: agpgart-sis
00:01.0 PCI bridge [0604]: Silicon Integrated Systems [SiS] AGP Port (virtual PCI-to-PCI bridge) [1039:0003] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
Memory behind bridge: bde00000-bfefffff
Prefetchable memory behind bridge: 9dd00000-bdcfffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Kernel modules: shpchp
00:02.0 ISA bridge [0601]: Silicon Integrated Systems [SiS] SiS964 [MuTIOL Media IO] LPC Controller [1039:0964] (rev 36)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel modules: i2c_sis630
00:02.5 IDE interface [0101]: Silicon Integrated Systems [SiS] 5513 IDE Controller [1039:5513] (rev 01) (prog-if 80 [Master])
Subsystem: Elitegroup Computer Systems 5513 IDE Controller [1019:1b30]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 128
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374
Region 4: I/O ports at ffa0 [size=16]
Capabilities: [58] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pata_sis
Kernel modules: pata_sis, ata_generic
00:02.7 Multimedia audio controller [0401]: Silicon Integrated Systems [SiS] SiS7012 AC'97 Sound Controller [1039:7012] (rev a0)
Subsystem: Elitegroup Computer Systems SiS7012 AC'97 Sound Controller [1019:6666]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (13000ns min, 2750ns max)
Interrupt: pin C routed to IRQ 18
Region 0: I/O ports at e800 [size=256]
Region 1: I/O ports at ec00 [size=128]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=55mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: snd_intel8x0
Kernel modules: snd_intel8x0
00:03.0 USB controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1 Controller [1039:7001] (rev 0f) (prog-if 10 [OHCI])
Subsystem: Elitegroup Computer Systems USB 1.1 Controller [1019:1b30]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (20000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at bffff000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:03.1 USB controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1 Controller [1039:7001] (rev 0f) (prog-if 10 [OHCI])
Subsystem: Elitegroup Computer Systems USB 1.1 Controller [1019:1b30]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (20000ns max), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 21
Region 0: Memory at bfffe000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:03.2 USB controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1 Controller [1039:7001] (rev 0f) (prog-if 10 [OHCI])
Subsystem: Elitegroup Computer Systems USB 1.1 Controller [1019:1b30]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (20000ns max), Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 22
Region 0: Memory at bfffd000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:03.3 USB controller [0c03]: Silicon Integrated Systems [SiS] USB 2.0 Controller [1039:7002] (prog-if 20 [EHCI])
Subsystem: Elitegroup Computer Systems USB 2.0 Controller [1019:1b30]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (20000ns max), Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 23
Region 0: Memory at bfffc000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:05.0 IDE interface [0101]: Silicon Integrated Systems [SiS] RAID bus controller 180 SATA/PATA [SiS] [1039:0180] (rev 01) (prog-if 85 [Master SecO PriO])
Subsystem: Elitegroup Computer Systems RAID bus controller 180 SATA/PATA [SiS] [1019:1b30]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at e400 [size=8]
Region 1: I/O ports at e000 [size=4]
Region 2: I/O ports at dc00 [size=8]
Region 3: I/O ports at d800 [size=4]
Region 4: I/O ports at d400 [size=16]
Region 5: I/O ports at 0000
Capabilities: [58] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: sata_sis
Kernel modules: sata_sis, ata_generic
00:0e.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8100/8101L/8139 PCI Fast Ethernet Adapter [10ec:8139] (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RTL-8100/8101L/8139 PCI Fast Ethernet Adapter [10ec:8139]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at d000 [size=256]
Region 1: Memory at bfffbc00 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: 8139too
Kernel modules: 8139cp, 8139too
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation NV34 [GeForce FX 5200] [10de:0322] (rev a1) (prog-if 00 [VGA controller])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 16
Region 0: Memory at be000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at a0000000 (32-bit, prefetchable) [size=256M]
Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 3.0
Status: RQ=32 Iso- ArqSz=0 Cal=3 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8
Command: RQ=32 ArqSz=2 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x8
Kernel driver in use: nouveau
Kernel modules: nouveau
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: 9.4
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 4.9.0-6-686-pae (SMP w/1 CPU core)
Locale: LANG=zh_CN.UTF-8, LC_CTYPE=zh_CN.UTF-8 (charmap=UTF-8), LANGUAGE=zh_CN:zh (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-4.9.0-6-686-pae depends on:
ii initramfs-tools [linux-initramfs-tool] 0.130
ii kmod 23-2
ii linux-base 4.5
Versions of packages linux-image-4.9.0-6-686-pae recommends:
ii firmware-linux-free 3.4
ii irqbalance 1.1.0-2.3
Versions of packages linux-image-4.9.0-6-686-pae suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02~beta3-5
pn linux-doc-4.9 <none>
Versions of packages linux-image-4.9.0-6-686-pae is related to:
pn firmware-amd-graphics <none>
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
pn firmware-misc-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
--- End Message ---