--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-5.2.0-2-amd64: Kernel 5.2 4.9 hang on reboot or shutdown last Step
- From: Linuxonlinehelp <linuxonlinehelp@gmx.de>
- Date: Mon, 26 Aug 2019 10:42:55 +0200
- Message-id: <156680897536.3558.17243444933390925350.reportbug@phenom.home55d.hef>
Package: src:linux
Version: 5.2.9-2
Severity: normal
Dear Maintainer,
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation?
* What exactly did you do (or not do) that was effective (or
ineffective)?
* What was the outcome of this action?
* What outcome did you expect instead?
*** End of the template - remove these template lines ***
-- Package-specific info:
** Version:
Linux version 5.2.9-2-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-21)) #1 SMP Debian 5.2.9-2 (2019-08-21)
** Command line:
BOOT_IMAGE=/vmlinuz-5.2.9-2-amd64 root=UUID=1e36c781-ae14-4d95-b6d0-aa35d11d1d2a ro ipv6.disable=1 noquiet nosplash nomodeset
** Not tainted
** Kernel log:
[ 13.196243] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[ 13.309962] device-mapper: uevent: version 1.0.3
[ 13.310088] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com
[ 14.329343] acpi_cpufreq: overriding BIOS provided _PSD data
[ 14.332179] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 14.332245] ACPI: Power Button [PWRB]
[ 14.332347] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 14.332424] ACPI: Power Button [PWRF]
[ 14.573670] nv_tco: NV TCO WatchDog Timer Driver v0.01
[ 14.573902] nv_tco: Watchdog reboot not detected
[ 14.574113] nv_tco: initialized (0x0840). heartbeat=30 sec (nowayout=0)
[ 14.662265] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 14.662338] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 14.663060] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 14.663131] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 14.663199] sd 7:0:0:0: Attached scsi generic sg4 type 0
[ 14.680366] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 14.873900] kvm: Nested Virtualization enabled
[ 14.873948] kvm: Nested Paging enabled
[ 14.889804] MCE: In-kernel MCE decoding enabled.
[ 14.947570] EDAC amd64: Node 0: DRAM ECC disabled.
[ 14.947619] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 15.006956] EDAC amd64: Node 0: DRAM ECC disabled.
[ 15.007004] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 15.039657] EDAC amd64: Node 0: DRAM ECC disabled.
[ 15.039714] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 15.076409] PCI Interrupt Link [LN0B] enabled at IRQ 17
[ 15.076463] snd_hda_intel 0000:02:00.1: Disabling MSI
[ 15.076512] snd_hda_intel 0000:02:00.1: Handle vga_switcheroo audio client
[ 15.227209] EDAC amd64: Node 0: DRAM ECC disabled.
[ 15.227257] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 15.275805] EDAC amd64: Node 0: DRAM ECC disabled.
[ 15.275863] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 15.311671] EDAC amd64: Node 0: DRAM ECC disabled.
[ 15.311728] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 15.738468] Adding 4201468k swap on /dev/sda2. Priority:-2 extents:1 across:4201468k FS
[ 16.419642] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:10.0/0000:02:00.1/sound/card0/input6
[ 16.419926] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:10.0/0000:02:00.1/sound/card0/input7
[ 16.420185] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:10.0/0000:02:00.1/sound/card0/input8
[ 16.420436] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:10.0/0000:02:00.1/sound/card0/input9
[ 16.511268] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
[ 16.704748] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 16.995158] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 20.647385] bonding: bond0 is being created...
[ 20.648228] bond0: down delay (1) is not a multiple of miimon (100), delay rounded to 0 ms
[ 20.648339] bond0: up delay (1) is not a multiple of miimon (100), updelay rounded to 0 ms
[ 41.639227] forcedeth 0000:00:0a.0 enp0s10: MSI enabled
[ 41.640622] bond0: Enslaving enp0s10 as an active interface with an up link
[ 51.747965] RTL8211C Gigabit Ethernet r8169-140:00: attached PHY driver [RTL8211C Gigabit Ethernet] (mii_bus:phy_addr=r8169-140:00, irq=IGNORE)
[ 51.818743] bond0: Enslaving enp1s8 as an active interface with a down link
[ 51.819148] r8169 0000:01:08.0 enp1s8: Link is Down
[ 54.094948] r8169 0000:01:08.0 enp1s8: Link is Up - 1Gbps/Full - flow control rx/tx
[ 54.166478] bond0: link status definitely up for interface enp1s8, 1000 Mbps full duplex
[ 61.948686] RTL8211C Gigabit Ethernet r8169-148:00: attached PHY driver [RTL8211C Gigabit Ethernet] (mii_bus:phy_addr=r8169-148:00, irq=IGNORE)
[ 62.018750] bond0: Enslaving enp1s9 as an active interface with a down link
[ 62.019167] r8169 0000:01:09.0 enp1s9: Link is Down
[ 64.327151] r8169 0000:01:09.0 enp1s9: Link is Up - 1Gbps/Full - flow control rx/tx
[ 64.366537] bond0: link status definitely up for interface enp1s9, 1000 Mbps full duplex
[ 75.601633] NFSD: Using UMH upcall client tracking operations.
[ 75.601694] NFSD: starting 90-second grace period (net f0000098)
[ 102.659204] bond0: Releasing backup interface enp1s9
[ 102.682609] r8169 0000:01:09.0 enp1s9: Link is Down
[ 112.776835] bond0: Releasing backup interface enp1s8
[ 112.798678] r8169 0000:01:08.0 enp1s8: Link is Down
[ 122.891515] bond0: Releasing backup interface enp0s10
[ 133.262791] br0: port 1(bond0) entered blocking state
[ 133.262841] br0: port 1(bond0) entered disabled state
[ 133.262975] device bond0 entered promiscuous mode
[ 133.293781] bond0: down delay (1) is not a multiple of miimon (100), delay rounded to 0 ms
[ 133.293896] bond0: up delay (1) is not a multiple of miimon (100), updelay rounded to 0 ms
[ 133.296519] bond0: option mode: unable to set because the bond device is up
[ 143.683564] forcedeth 0000:00:0a.0 enp0s10: MSI enabled
[ 143.684666] device enp0s10 entered promiscuous mode
[ 143.685334] bond0: Enslaving enp0s10 as an active interface with an up link
[ 143.685455] br0: port 1(bond0) entered blocking state
[ 143.685502] br0: port 1(bond0) entered forwarding state
[ 144.096529] RTL8211C Gigabit Ethernet r8169-140:00: attached PHY driver [RTL8211C Gigabit Ethernet] (mii_bus:phy_addr=r8169-140:00, irq=IGNORE)
[ 144.166612] device enp1s8 entered promiscuous mode
[ 144.166778] bond0: Enslaving enp1s8 as an active interface with a down link
[ 144.166840] r8169 0000:01:08.0 enp1s8: Link is Down
[ 144.502119] RTL8211C Gigabit Ethernet r8169-148:00: attached PHY driver [RTL8211C Gigabit Ethernet] (mii_bus:phy_addr=r8169-148:00, irq=IGNORE)
[ 144.574861] r8169 0000:01:09.0 enp1s9: Link is Down
[ 144.575239] device enp1s9 entered promiscuous mode
[ 144.575402] bond0: Enslaving enp1s9 as an active interface with a down link
[ 146.934441] r8169 0000:01:08.0 enp1s8: Link is Up - 1Gbps/Full - flow control rx/tx
[ 146.982501] bond0: link status definitely up for interface enp1s8, 1000 Mbps full duplex
[ 147.330434] r8169 0000:01:09.0 enp1s9: Link is Up - 1Gbps/Full - flow control rx/tx
[ 147.398492] bond0: link status definitely up for interface enp1s9, 1000 Mbps full duplex
** Model information
sys_vendor: System manufacturer
product_name: System Product Name
product_version: System Version
chassis_vendor: Chassis Manufacture
chassis_version: Chassis Version
bios_vendor: American Megatrends Inc.
bios_version: 1701
board_vendor: ASUSTeK Computer INC.
board_name: M4N75TD
board_version: Rev 1.xx
** Loaded modules:
nf_tables
nfnetlink
cpufreq_userspace
cpufreq_conservative
cpufreq_powersave
binfmt_misc
snd_hda_codec_hdmi
nouveau
snd_hda_intel
snd_hda_codec
snd_hda_core
snd_hwdep
edac_mce_amd
mxm_wmi
ttm
snd_pcm
kvm_amd
drm_kms_helper
ccp
snd_timer
serio_raw
rng_core
snd
drm
pcspkr
k10temp
kvm
sg
i2c_algo_bit
soundcore
nv_tco
irqbypass
evdev
asus_atk0110
pcc_cpufreq
button
acpi_cpufreq
wmi_bmof
ecryptfs
dm_crypt
dm_mod
bonding
loop
nfsd
auth_rpcgss
nfs_acl
lockd
grace
sunrpc
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
btrfs
zstd_decompress
zstd_compress
raid10
raid456
async_raid6_recov
async_memcpy
async_pq
async_xor
async_tx
xor
raid6_pq
libcrc32c
crc32c_generic
raid0
multipath
linear
br_netfilter
bridge
stp
llc
raid1
md_mod
sd_mod
ohci_pci
ahci
libahci
libata
psmouse
ehci_pci
scsi_mod
ehci_hcd
r8169
ohci_hcd
forcedeth
realtek
usbcore
libphy
usb_common
i2c_nforce2
video
wmi
** PCI devices:
00:00.0 RAM memory [0500]: NVIDIA Corporation MCP78S [GeForce 8200] Memory Controller [10de:0754] (rev a2)
Subsystem: ASUSTeK Computer Inc. M3N72-D [1043:82e8]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
NUMA node: 0
Capabilities: <access denied>
00:01.0 ISA bridge [0601]: NVIDIA Corporation MCP78S [GeForce 8200] LPC Bridge [10de:075d] (rev a2)
Subsystem: ASUSTeK Computer Inc. M3N72-D [1043:82e8]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
NUMA node: 0
Region 0: I/O ports at 0900 [size=256]
00:01.1 SMBus [0c05]: NVIDIA Corporation MCP78S [GeForce 8200] SMBus [10de:0752] (rev a1)
Subsystem: ASUSTeK Computer Inc. M3N72-D [1043:82e8]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 10
NUMA node: 0
Region 0: I/O ports at 0e00 [size=64]
Region 4: I/O ports at 0600 [size=64]
Region 5: I/O ports at 0700 [size=64]
Capabilities: <access denied>
Kernel driver in use: nForce2_smbus
Kernel modules: i2c_nforce2, nv_tco
00:01.2 RAM memory [0500]: NVIDIA Corporation MCP78S [GeForce 8200] Memory Controller [10de:0751] (rev a1)
Subsystem: ASUSTeK Computer Inc. M3N72-D [1043:82e8]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
NUMA node: 0
00:01.3 Co-processor [0b40]: NVIDIA Corporation MCP78S [GeForce 8200] Co-Processor [10de:0753] (rev a2)
Subsystem: ASUSTeK Computer Inc. M3N72-D [1043:82e8]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 7
NUMA node: 0
Region 0: Memory at f9e80000 (32-bit, non-prefetchable) [size=512K]
00:01.4 RAM memory [0500]: NVIDIA Corporation MCP78S [GeForce 8200] Memory Controller [10de:0568] (rev a1)
Subsystem: ASUSTeK Computer Inc. M3N72-D [1043:82e8]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
NUMA node: 0
00:02.0 USB controller [0c03]: NVIDIA Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller [10de:077b] (rev a1) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. M3N72-D [1043:82e8]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 23
NUMA node: 0
Region 0: Memory at f9e7e000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:02.1 USB controller [0c03]: NVIDIA Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller [10de:077c] (rev a1) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. M3N72-D [1043:82e8]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 22
NUMA node: 0
Region 0: Memory at f9e7fc00 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:04.0 USB controller [0c03]: NVIDIA Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller [10de:077d] (rev a1) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. M3N72-D [1043:82e8]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 21
NUMA node: 0
Region 0: Memory at f9e7d000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:04.1 USB controller [0c03]: NVIDIA Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller [10de:077e] (rev a1) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. M3N72-D [1043:82e8]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 20
NUMA node: 0
Region 0: Memory at f9e7f800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:08.0 PCI bridge [0604]: NVIDIA Corporation MCP78S [GeForce 8200] PCI Bridge [10de:075a] (rev a1) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
NUMA node: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000c000-0000cfff [size=4K]
Memory behind bridge: f9f00000-f9ffffff [size=1M]
Prefetchable memory behind bridge: None
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:09.0 SATA controller [0106]: NVIDIA Corporation MCP78S [GeForce 8200] AHCI Controller [10de:0ad4] (rev a2) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. M3N72-D [1043:82e8]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 28
NUMA node: 0
Region 0: I/O ports at b080 [size=8]
Region 1: I/O ports at b000 [size=4]
Region 2: I/O ports at ac00 [size=8]
Region 3: I/O ports at a880 [size=4]
Region 4: I/O ports at a800 [size=16]
Region 5: Memory at f9e7a000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:0a.0 Ethernet controller [0200]: NVIDIA Corporation MCP77 Ethernet [10de:0760] (rev a2)
Subsystem: ASUSTeK Computer Inc. MCP77 Ethernet [1043:8235]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 30
NUMA node: 0
Region 0: Memory at f9e7c000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at a480 [size=8]
Region 2: Memory at f9e7f400 (32-bit, non-prefetchable) [size=256]
Region 3: Memory at f9e7f000 (32-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: forcedeth
Kernel modules: forcedeth
00:10.0 PCI bridge [0604]: NVIDIA Corporation MCP78S [GeForce 8200] PCI Express Bridge [10de:0778] (rev a1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 24
NUMA node: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff [size=4K]
Memory behind bridge: fa000000-fbefffff [size=31M]
Prefetchable memory behind bridge: 00000000ce000000-00000000dfffffff [size=288M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:11.0 PCI bridge [0604]: NVIDIA Corporation Device [10de:0779] (rev a1) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 25
NUMA node: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: None
Memory behind bridge: None
Prefetchable memory behind bridge: None
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:13.0 PCI bridge [0604]: NVIDIA Corporation MCP78S [GeForce 8200] PCI Bridge [10de:077a] (rev a1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 26
NUMA node: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000e000-0000efff [size=4K]
Memory behind bridge: fbf00000-fbffffff [size=1M]
Prefetchable memory behind bridge: None
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:14.0 PCI bridge [0604]: NVIDIA Corporation MCP78S [GeForce 8200] PCI Bridge [10de:077a] (rev a1) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 27
NUMA node: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: None
Memory behind bridge: None
Prefetchable memory behind bridge: None
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor HyperTransport Configuration [1022:1200]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
NUMA node: 0
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Address Map [1022:1201]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
NUMA node: 0
00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor DRAM Controller [1022:1202]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
NUMA node: 0
00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Miscellaneous Control [1022:1203]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
NUMA node: 0
Capabilities: <access denied>
Kernel driver in use: k10temp
Kernel modules: k10temp
00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Link Control [1022:1204]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
NUMA node: 0
01:08.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8169 PCI Gigabit Ethernet Controller [10ec:8169] (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RTL8169/8110 Family PCI Gigabit Ethernet NIC [10ec:8169]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns min, 16000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
NUMA node: 0
Region 0: I/O ports at c800 [size=256]
Region 1: Memory at f9fffc00 (32-bit, non-prefetchable) [size=256]
Expansion ROM at f9fc0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
01:09.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8169 PCI Gigabit Ethernet Controller [10ec:8169] (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RTL8169/8110 Family PCI Gigabit Ethernet NIC [10ec:8169]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns min, 16000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
NUMA node: 0
Region 0: I/O ports at c400 [size=256]
Region 1: Memory at f9fff800 (32-bit, non-prefetchable) [size=256]
Expansion ROM at f9fa0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
02:00.0 VGA compatible controller [0300]: NVIDIA Corporation GT218 [GeForce 8400 GS Rev. 3] [10de:10c3] (rev a2) (prog-if 00 [VGA controller])
Subsystem: eVga.com. Corp. GT218 [GeForce 8400 GS Rev. 3] [3842:1301]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 10
NUMA node: 0
Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at ce000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at dc00 [size=128]
Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel modules: nouveau
02:00.1 Audio device [0403]: NVIDIA Corporation High Definition Audio Controller [10de:0be3] (rev a1)
Subsystem: eVga.com. Corp. High Definition Audio Controller [3842:1301]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
NUMA node: 0
Region 0: Memory at fbefc000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
04:00.0 SATA controller [0106]: Marvell Technology Group Ltd. Device [1b4b:9215] (rev 11) (prog-if 01 [AHCI 1.0])
Subsystem: Marvell Technology Group Ltd. Device [1b4b:9215]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 29
NUMA node: 0
Region 0: I/O ports at ec00 [size=8]
Region 1: I/O ports at e880 [size=4]
Region 2: I/O ports at e800 [size=8]
Region 3: I/O ports at e480 [size=4]
Region 4: I/O ports at e400 [size=32]
Region 5: Memory at fbfff800 (32-bit, non-prefetchable) [size=2K]
Expansion ROM at fbfe0000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
** USB devices:
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
--- End Message ---