Bug#1006149: linux-image-5.16.0-1-686: Fails to boot on T41 Thinkpads
On Mon 04 Apr 2022 at 18:09:59 +0900 Damien Le Moal <damien.lemoal@opensource.wdc.com> wrote:
[...]
> hdparm -I /dev/sdX
,-----[ 1st T41 ]-------------------------------------------------------------
| netty:~# hdparm -I /dev/sda
|
| /dev/sda:
|
| ATA device, with non-removable media
| Model Number: IC25N030ATMR04-0
| Serial Number: MRG2H0KBCYTR8R
| Firmware Revision: MOAOAD4A
| Standards:
| Used: ATA/ATAPI-6 T13 1410D revision 3a
| Supported: 6 5 4
| Configuration:
| Logical max current
| cylinders 16383 16383
| heads 15 15
| sectors/track 63 63
| --
| CHS current addressable sectors: 15481935
| LBA user addressable sectors: 58605120
| Logical/Physical Sector size: 512 bytes
| device size with M = 1024*1024: 28615 MBytes
| device size with M = 1000*1000: 30005 MBytes (30 GB)
| cache/buffer size = 1740 KBytes (type=DualPortCache)
| Capabilities:
| LBA, IORDY(can be disabled)
| Standby timer values: spec'd by Vendor, no device specific minimum
| R/W multiple sector transfer: Max = 16 Current = 16
| Advanced power management level: 128
| Recommended acoustic management value: 128, current value: 254
| DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
| Cycle time: min=120ns recommended=120ns
| PIO: pio0 pio1 pio2 pio3 pio4
| Cycle time: no flow control=240ns IORDY flow control=120ns
| Commands/features:
| Enabled Supported:
| * SMART feature set
| Security Mode feature set
| * Power Management feature set
| * Write cache
| * Look-ahead
| * Host Protected Area feature set
| * WRITE_BUFFER command
| * READ_BUFFER command
| * NOP cmd
| * Advanced Power Management feature set
| Power-Up In Standby feature set
| * SET_FEATURES required to spinup after power up
| Address Offset Reserved Area Boot
| SET_MAX security extension
| Automatic Acoustic Management feature set
| * Device Configuration Overlay feature set
| * Mandatory FLUSH_CACHE
| * SMART error logging
| * SMART self-test
| Security:
| Master password revision code = 65534
| supported
| not enabled
| not locked
| frozen
| not expired: security count
| not supported: enhanced erase
| 26min for SECURITY ERASE UNIT.
| HW reset results:
| CBLID- above Vih
| Device num = 0 determined by the jumper
| Checksum: correct
| netty:~#
`----------------------------------------------------------------------------
,-----[ 2nd T41 ]-------------------------------------------------------------
| negrito:~# hdparm -I /dev/sda
|
| /dev/sda:
|
| ATA device, with non-removable media
| Model Number: HTS548040M9AT00
| Serial Number: MRL202L2K9PJ6B
| Firmware Revision: MG2OA5BA
| Standards:
| Used: ATA/ATAPI-6 T13 1410D revision 3a
| Supported: 6 5 4
| Configuration:
| Logical max current
| cylinders 16383 16383
| heads 16 16
| sectors/track 63 63
| --
| CHS current addressable sectors: 16514064
| LBA user addressable sectors: 78140160
| Logical/Physical Sector size: 512 bytes
| device size with M = 1024*1024: 38154 MBytes
| device size with M = 1000*1000: 40007 MBytes (40 GB)
| cache/buffer size = 7877 KBytes (type=DualPortCache)
| Capabilities:
| LBA, IORDY(can be disabled)
| Standby timer values: spec'd by Vendor, no device specific minimum
| R/W multiple sector transfer: Max = 16 Current = 16
| Advanced power management level: 192
| Recommended acoustic management value: 128, current value: 254
| DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
| Cycle time: min=120ns recommended=120ns
| PIO: pio0 pio1 pio2 pio3 pio4
| Cycle time: no flow control=240ns IORDY flow control=120ns
| Commands/features:
| Enabled Supported:
| * SMART feature set
| Security Mode feature set
| * Power Management feature set
| * Write cache
| * Look-ahead
| * Host Protected Area feature set
| * WRITE_BUFFER command
| * READ_BUFFER command
| * NOP cmd
| * Advanced Power Management feature set
| Power-Up In Standby feature set
| * SET_FEATURES required to spinup after power up
| Address Offset Reserved Area Boot
| SET_MAX security extension
| Automatic Acoustic Management feature set
| * Device Configuration Overlay feature set
| * Mandatory FLUSH_CACHE
| * SMART error logging
| * SMART self-test
| Security:
| Master password revision code = 65534
| supported
| not enabled
| not locked
| frozen
| not expired: security count
| not supported: enhanced erase
| 26min for SECURITY ERASE UNIT.
| HW reset results:
| CBLID- above Vih
| Device num = 0 determined by the jumper
| Checksum: correct
| negrito:~#
`----------------------------------------------------------------------------
Petra
Reply to: