[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#887304: marked as done (linux-image-4.14.0-0.bpo.2-amd64: Error crypto/algapi.c:348 and a long system boot.)

Your message dated Sun, 27 Feb 2022 12:08:51 -0800 (PST)
with message-id <621bda53.1c69fb81.5f248.ecb3@mx.google.com>
and subject line Closing this bug (BTS maintenance for src:linux bugs)
has caused the Debian Bug report #887304,
regarding linux-image-4.14.0-0.bpo.2-amd64: Error crypto/algapi.c:348 and a long system boot.
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
887304: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=887304
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: src:linux
Version: 4.14.7-1~bpo9+1
Severity: important

PC: Samsung NP300U1A.

Installed kernel 'linux-image-4.11.0-0.bpo.1-amd64' (ver. 4.11.6-1~bpo9+1) works without problems.
Kernels 'linux-image-4.13.0-0.bpo.1-amd64' (ver. 4.13.13-1~bpo9+1) and 'linux-image-4.14.0-0.bpo.2-amd64' (ver. 4.14.7-1~bpo9+1) indicates an error.
After the error message, the system waits 120 seconds and continues to load.

-- Package-specific info:
** Version:
Linux version 4.14.0-0.bpo.2-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18)) #1 SMP Debian 4.14.7-1~bpo9+1 (2017-12-22)

** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.14.0-0.bpo.2-amd64 root=UUID=1483b39e-df68-4eca-a256-b03905c96e83 ro quiet

** Tainted: DW (640)
 * Kernel has oopsed before.
 * Taint on warning.

** Kernel log:
[  190.873006] task: ffff902f1964d080 task.stack: ffffad61009c4000
[  190.876933] RIP: 0010:crypto_wait_for_test+0x52/0x60
[  190.880869] RSP: 0018:ffffad61009c7c68 EFLAGS: 00010286
[  190.884802] RAX: 00000000fffffe00 RBX: ffff902f195a1c00 RCX: 0000000000000000
[  190.888788] RDX: 0000000000000000 RSI: ffff902f1964db40 RDI: ffff902f195a1db0
[  190.892611] RBP: ffffad61009c7c70 R08: 0000000000000001 R09: 0000000000000017
[  190.896273] R10: ffffad61009c7c00 R11: 00000000000000a9 R12: 0000000000000000
[  190.899867] R13: 0000000000000000 R14: ffffffffc06c3380 R15: ffffffffc06c33d0
[  190.903470] FS:  00007f741cdc88c0(0000) GS:ffff902f1b000000(0000) knlGS:0000000000000000
[  190.907115] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  190.910742] CR2: 00007fffb6403be8 CR3: 0000000119652002 CR4: 00000000000606f0
[  190.914406] Call Trace:
[  190.918046]  crypto_register_alg+0x5b/0x70
[  190.921726]  ? ecdh_set_secret+0xb0/0xb0 [ecdh_generic]
[  190.925381]  crypto_register_kpp+0x29/0x30
[  190.929009]  ecdh_init+0x15/0x20 [ecdh_generic]
[  190.932621]  do_one_initcall+0x52/0x1a0
[  190.936215]  ? __vunmap+0x81/0xb0
[  190.939753]  ? do_init_module+0x27/0x209
[  190.943265]  do_init_module+0x5f/0x209
[  190.946749]  load_module+0x25aa/0x2ce0
[  190.950198]  ? security_kernel_post_read_file+0x6b/0x80
[  190.953618]  SYSC_finit_module+0xe5/0x120
[  190.957027]  ? SYSC_finit_module+0xe5/0x120
[  190.960372]  SyS_finit_module+0xe/0x10
[  190.963633]  system_call_fast_compare_end+0xc/0x97
[  190.966907] RIP: 0033:0x7f741c6d8229
[  190.970140] RSP: 002b:00007fff7dc580b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[  190.973406] RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007f741c6d8229
[  190.976661] RDX: 0000000000000000 RSI: 00007f741c3ee265 RDI: 000000000000000c
[  190.979883] RBP: 00007fff7dc570b0 R08: 0000000000000000 R09: 0000561d6ad65740
[  190.983109] R10: 000000000000000c R11: 0000000000000246 R12: 0000000000000005
[  190.986357] R13: 0000561d6ad66b10 R14: 00007fff7dc57090 R15: 0000000000000005
[  190.989572] Code: 75 2d 48 8d bb b8 00 00 00 31 f6 e8 b9 fd ff ff 48 8d bb a8 01 00 00 e8 cd 46 38 00 85 c0 75 0b 48 89 df e8 61 dc ff ff 5b 5d c3 <0f> ff eb f1 0f ff eb ed 66 0f 1f 44 00 00 66 66 66 66 90 55 48 
[  190.996457] ---[ end trace ab7c9b4b8d3378c2 ]---
[  191.006863] Bluetooth: Core ver 2.22
[  191.009112] NET: Registered protocol family 31
[  191.011278] Bluetooth: HCI device and connection manager initialized
[  191.013866] Bluetooth: HCI socket layer initialized
[  191.015971] Bluetooth: L2CAP socket layer initialized
[  191.018004] Bluetooth: SCO socket layer initialized
[  191.092013] raid6: sse2x1   gen()  3380 MB/s
[  191.160011] raid6: sse2x1   xor()  2695 MB/s
[  191.228013] raid6: sse2x2   gen()  4345 MB/s
[  191.296023] raid6: sse2x2   xor()  3121 MB/s
[  191.364024] raid6: sse2x4   gen()  5041 MB/s
[  191.432013] raid6: sse2x4   xor()  3831 MB/s
[  191.433561] raid6: using algorithm sse2x4 gen() 5041 MB/s
[  191.435108] raid6: .... xor() 3831 MB/s, rmw enabled
[  191.436664] raid6: using ssse3x2 recovery algorithm
[  191.440735] xor: automatically using best checksumming function   avx       
[  191.455930] Btrfs loaded, crc32c=crc32c-intel
[  191.462920] usbcore: registered new interface driver btusb
[  191.495836] device-mapper: uevent: version 1.0.3
[  191.497814] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[  191.539350] ip_tables: (C) 2000-2006 Netfilter Core Team
[  191.596633] sd 0:0:0:0: Attached scsi generic sg0 type 0
[  192.298890] BTRFS: device label rootfs devid 1 transid 151116 /dev/sda3
[  192.331454] PM: Starting manual resume from disk
[  192.333590] PM: Image not found (code -22)
[  192.539915] BTRFS info (device sda3): disk space caching is enabled
[  192.541533] BTRFS info (device sda3): has skinny extents
[  193.408658] random: crng init done
[  195.861256] systemd[1]: systemd 236 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[  195.866048] systemd[1]: Detected architecture x86-64.
[  195.878464] systemd[1]: Set hostname to <NP300U1A>.
[  196.683821] systemd[1]: File /lib/systemd/system/systemd-journald.service:35 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
[  196.689890] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
[  196.857342] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[  196.862843] systemd[1]: Created slice User and Session Slice.
[  196.865971] systemd[1]: Created slice System Slice.
[  196.870868] systemd[1]: Mounting POSIX Message Queue File System...
[  196.874605] systemd[1]: Listening on Journal Socket (/dev/log).
[  197.603022] BTRFS info (device sda3): use lzo compression
[  197.606420] BTRFS info (device sda3): disk space caching is enabled
[  197.813950] systemd-journald[470]: Received request to flush runtime journal from PID 1
[  199.467192] Adding 8388604k swap on /dev/sda2.  Priority:-2 extents:1 across:8388604k FS
[  202.742311] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[  202.755087] iwlwifi 0000:01:00.0: Radio type=0x2-0x1-0x0
[  203.058457] iwlwifi 0000:01:00.0: Radio type=0x2-0x1-0x0
[  203.147209] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[  203.175114] iwlwifi 0000:01:00.0: Radio type=0x2-0x1-0x0
[  203.479071] iwlwifi 0000:01:00.0: Radio type=0x2-0x1-0x0
[  203.563255] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[  204.377963] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[  206.350551] fuse init (API version 7.26)
[  208.188883] iwlwifi 0000:01:00.0: Radio type=0x2-0x1-0x0
[  208.491076] iwlwifi 0000:01:00.0: Radio type=0x2-0x1-0x0
[  208.575293] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[  208.630181] wlp1s0: authenticate with d4:ca:6d:92:b1:d1
[  208.634599] wlp1s0: send auth to d4:ca:6d:92:b1:d1 (try 1/3)
[  208.637772] wlp1s0: authenticated
[  208.641994] wlp1s0: associate with d4:ca:6d:92:b1:d1 (try 1/3)
[  208.650476] wlp1s0: RX AssocResp from d4:ca:6d:92:b1:d1 (capab=0x431 status=0 aid=2)
[  208.679019] wlp1s0: associated
[  208.679103] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[  843.375250] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
[  843.407612] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced.
[  844.174724] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
[  844.209727] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced.

** Model information
sys_vendor: SAMSUNG ELECTRONICS CO., LTD.
product_name: 350U2A/350U2B/300U1A/351U2A/351U2B/301U1A
product_version: 07PY
chassis_vendor: SAMSUNG ELECTRONICS CO., LTD.
chassis_version: N/A
bios_vendor: American Megatrends Inc.
bios_version: 07PY.M022.20121025.WZW
board_vendor: SAMSUNG ELECTRONICS CO., LTD.
board_name: 350U2A/350U2B/300U1A/351U2A/351U2B/301U1A
board_version: 07PY

** Loaded modules:
fuse
sg
overlay
ip_tables
x_tables
efivarfs
dm_mod
ctr
cpuid
ccm
btusb
btrtl
btrfs
crc32c_generic
xor
zstd_decompress
zstd_compress
xxhash
raid6_pq
btintel
btbcm
bluetooth
autofs4
sd_mod
snd_hda_codec_hdmi
uvcvideo
videobuf2_vmalloc
joydev
videobuf2_memops
videobuf2_v4l2
videobuf2_core
videodev
media
snd_hda_codec_realtek
snd_hda_codec_generic
ecdh_generic
crc16
arc4
intel_rapl
x86_pkg_temp_thermal
intel_powerclamp
coretemp
kvm_intel
kvm
irqbypass
crct10dif_pclmul
crc32_pclmul
crc32c_intel
iwldvm
iTCO_wdt
iTCO_vendor_support
efi_pstore
ghash_clmulni_intel
mac80211
cryptd
snd_hda_intel
intel_cstate
intel_uncore
intel_rapl_perf
snd_hda_codec
snd_hwdep
snd_hda_core
psmouse
ahci
libahci
iwlwifi
ehci_pci
ehci_hcd
lpc_ich
libata
pcspkr
serio_raw
efivars
i2c_i801
evdev
i915
i2c_algo_bit
mfd_core
scsi_mod
usbcore
drm_kms_helper
usb_common
cfg80211
snd_pcm
snd_timer
rfkill
mei_me
snd
drm
shpchp
soundcore
mei
fan
thermal
battery
wmi
video
ac
button

** Network interface configuration:

-- System Information:
Debian Release: 9.3
  APT prefers stable-updates
  APT policy: (500, 'stable-updates'), (500, 'proposed-updates'), (500, 'stable')
Architecture: amd64 (x86_64)

Kernel: Linux 4.14.0-0.bpo.2-amd64 (SMP w/4 CPU cores)
Locale: LANG=ru_RU.utf8, LC_CTYPE=ru_RU.utf8 (charmap=UTF-8), LANGUAGE=ru_RU.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages linux-image-4.14.0-0.bpo.2-amd64 depends on:
ii  initramfs-tools [linux-initramfs-tool]  0.130
ii  kmod                                    23-2
ii  linux-base                              4.5

Versions of packages linux-image-4.14.0-0.bpo.2-amd64 recommends:
pn  apparmor             <none>
pn  firmware-linux-free  <none>
pn  irqbalance           <none>

Versions of packages linux-image-4.14.0-0.bpo.2-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  grub-efi-amd64          2.02~beta3-5
pn  linux-doc-4.14          <none>

Versions of packages linux-image-4.14.0-0.bpo.2-amd64 is related to:
pn  firmware-amd-graphics     <none>
pn  firmware-atheros          <none>
pn  firmware-bnx2             <none>
pn  firmware-bnx2x            <none>
pn  firmware-brcm80211        <none>
pn  firmware-cavium           <none>
pn  firmware-intel-sound      <none>
pn  firmware-intelwimax       <none>
pn  firmware-ipw2x00          <none>
pn  firmware-ivtv             <none>
ii  firmware-iwlwifi          20170823-1~bpo9+1
pn  firmware-libertas         <none>
pn  firmware-linux-nonfree    <none>
ii  firmware-misc-nonfree     20170823-1~bpo9+1
pn  firmware-myricom          <none>
pn  firmware-netxen           <none>
pn  firmware-qlogic           <none>
pn  firmware-realtek          <none>
pn  firmware-samsung          <none>
pn  firmware-siano            <none>
pn  firmware-ti-connectivity  <none>
pn  xen-hypervisor            <none>

-- no debconf information

--- End Message ---
--- Begin Message --- 
Hi

This bug was filed for a very old kernel or the bug is old itself
without resolution.

If you can reproduce it with

- the current version in unstable/testing
- the latest kernel from backports

please reopen the bug, see https://www.debian.org/Bugs/server-control
for details.

Regards,
Salvatore

--- End Message ---
Reply to: