Bug#1017425: closed by Debian FTP Masters <ftpmaster@ftp-master.debian.org> (reply to Salvatore Bonaccorso <carnil@debian.org>) (Bug#1017425: fixed in linux 5.19.6-1)
This bug was reported against Stable. It cannot be considered as
closed for as long as a new 5.10 kernel including the fix hasn't been
published.
Martin-Éric
On Thu, Sep 1, 2022 at 5:15 PM Debian Bug Tracking System
<owner@bugs.debian.org> wrote:
>
> This is an automatic notification regarding your Bug report
> which was filed against the src:linux package:
>
> #1017425: [i386] Unconditional LFENCE instructions in FILL_RETURN_BUFFER
>
> It has been closed by Debian FTP Masters <ftpmaster@ftp-master.debian.org> (reply to Salvatore Bonaccorso <carnil@debian.org>).
>
> Their explanation is attached below along with your original report.
> If this explanation is unsatisfactory and you have not received a
> better one in a separate message then please contact Debian FTP Masters <ftpmaster@ftp-master.debian.org> (reply to Salvatore Bonaccorso <carnil@debian.org>) by
> replying to this email.
>
>
> --
> 1017425: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1017425
> Debian Bug Tracking System
> Contact owner@bugs.debian.org with problems
>
>
>
> ---------- Forwarded message ----------
> From: Debian FTP Masters <ftpmaster@ftp-master.debian.org>
> To: 1017425-close@bugs.debian.org
> Cc:
> Bcc:
> Date: Thu, 01 Sep 2022 14:10:11 +0000
> Subject: Bug#1017425: fixed in linux 5.19.6-1
> Source: linux
> Source-Version: 5.19.6-1
> Done: Salvatore Bonaccorso <carnil@debian.org>
>
> We believe that the bug you reported is fixed in the latest version of
> linux, which is due to be installed in the Debian FTP archive.
>
> A summary of the changes between this version and the previous one is
> attached.
>
> Thank you for reporting the bug, which will now be closed. If you
> have further comments please address them to 1017425@bugs.debian.org,
> and the maintainer will reopen the bug report if appropriate.
>
> Debian distribution maintenance software
> pp.
> Salvatore Bonaccorso <carnil@debian.org> (supplier of updated linux package)
>
> (This message was generated automatically at their request; if you
> believe that there is a problem with it please contact the archive
> administrators by mailing ftpmaster@ftp-master.debian.org)
>
>
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA512
>
> Format: 1.8
> Date: Thu, 01 Sep 2022 09:04:35 +0200
> Source: linux
> Architecture: source
> Version: 5.19.6-1
> Distribution: unstable
> Urgency: medium
> Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
> Changed-By: Salvatore Bonaccorso <carnil@debian.org>
> Closes: 1016807 1017425 1017894 1017972 1018752
> Changes:
> linux (5.19.6-1) unstable; urgency=medium
> .
> * New upstream stable update:
> https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.19.1
> https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.19.2
> - Revert "net: usb: ax88179_178a needs FLAG_SEND_ZLP" (Closes: #1017894)
> https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.19.3
> https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.19.4
> https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.19.5
> https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.19.6
> - mm/gup: fix FOLL_FORCE COW security issue and remove FOLL_COW
> (CVE-2022-2590)
> - af_key: Do not call xfrm_probe_algs in parallel (CVE-2022-3028)
> - [x86] nospec: Unwreck the RSB stuffing
> - [x86] nospec: Fix i386 RSB stuffing (Closes: #1017425)
> - bpf: Don't use tnum_range on array range checking for poke descriptors
> (CVE-2022-2905)
> .
> [ Ben Hutchings ]
> * d/tests/kbuild: Fix default-flavour lookup for arches with no featuresets
> * d/tests/kbuild: Make flavour lookup verbose
> * d/lib/python/debian_linux, d/templates: Use variable for binary package
> name
> * lintian: Update overrides in linux-image-*-dbg for lintian 2.115
> * d/{signing_templates/,}rules.real: Run dh_lintian for all packages
> * [hppa,mips,mipsel,powerpc] lintian: Override error for 64-bit kernels
> * [mips64el,mipsel,ppc64el] lintian: Override error for unstripped vmlinux
> * [arm64] lintian: Override errors for vdso32.so in linux-image-*-dbg
> * android: Remove CONFIG_ANDROID:
> - Drop "wireguard: Clear keys after suspend despite CONFIG_ANDROID=y"
> - pm/sleep: Add PM_USERSPACE_AUTOSLEEP Kconfig
> - remove CONFIG_ANDROID
> - Enable/disable ANDROID_BINDER_IPC to match previous configuration
> .
> [ Vincent Blut ]
> * [x86] drivers/hwmon: Enable SENSORS_ASUS_WMI and SENSORS_ASUS_EC as
> modules
> * [x86] drivers/platform/x86: Enable NVIDIA_WMI_EC_BACKLIGHT as module
> (Closes: #1017972)
> * [arm64] drivers/spi: Enable SPI_GPIO and SPI_SUN6I as modules
> (Closes: #1016807)
> .
> [ Diederik de Haas ]
> * [arm64] drivers/gpu/drm/rockchip: Explicitly enable ROCKCHIP_VOP
> .
> [ Helge Deller ]
> * [hppa] Drop CONFIG_PATA_LEGACY for hppa architecture
> .
> [ Salvatore Bonaccorso ]
> * [rt] Refresh "rcutorture: Also force sched priority to timersd on boosting
> test."
> * Drop setting of CRYPTO_BLAKE2S
> crypto: blake2s shash module was removed upstream.
> * [arm] arch/arm/crypto: Enable CRYPTO_BLAKE2S_ARM
> * certs: Rotate to use the "Debian Secure Boot Signer 2022 - linux"
> certificate (Closes: #1018752)
> * Set ABI to 1
> * [hppa/parisc64] Drop explicit setting of 64BIT
> Checksums-Sha1:
> 42a3c472d3128c9f851b9416e674497e8ddfd252 251841 linux_5.19.6-1.dsc
> 1aac6f7bbdd6de2d32a8e8da75b163d79383d207 133767148 linux_5.19.6.orig.tar.xz
> feabaae96187bad30f3967959c0c955fd050082c 1318072 linux_5.19.6-1.debian.tar.xz
> 0db0b77cb3cdeee0a626e24fed1828d455bacb93 6975 linux_5.19.6-1_source.buildinfo
> Checksums-Sha256:
> 4cc09d519dbd22b1b2ca074b98c3caf101494982e170fafa858d6ee930b18b4f 251841 linux_5.19.6-1.dsc
> 57b61adbafbd97e41da2153a2733ba3d3d2963c96d391ce57b29c0bb58010de4 133767148 linux_5.19.6.orig.tar.xz
> e3f6a4e6191a0e67678dacba4beea0dcf61fc0d90a96ceb79d993f41f4da9275 1318072 linux_5.19.6-1.debian.tar.xz
> 6ed558d70babbcfcc1d648d319eac9e639b973693e68ee99d5121c38875edbdd 6975 linux_5.19.6-1_source.buildinfo
> Files:
> 08b47f7b67275e2180c0aa6b4d9dfe9e 251841 kernel optional linux_5.19.6-1.dsc
> f968bf5c2f82b1dc40754fde8bcbfddb 133767148 kernel optional linux_5.19.6.orig.tar.xz
> 086b762bf7e3734ab211ecfad57d8c58 1318072 kernel optional linux_5.19.6-1.debian.tar.xz
> 0db0c08b0dc5c25e6042db1c5feaffe3 6975 kernel optional linux_5.19.6-1_source.buildinfo
>
> -----BEGIN PGP SIGNATURE-----
>
> iQKmBAEBCgCQFiEERkRAmAjBceBVMd3uBUy48xNDz0QFAmMQWkRfFIAAAAAALgAo
> aXNzdWVyLWZwckBub3RhdGlvbnMub3BlbnBncC5maWZ0aGhvcnNlbWFuLm5ldDQ2
> NDQ0MDk4MDhDMTcxRTA1NTMxRERFRTA1NENCOEYzMTM0M0NGNDQSHGNhcm5pbEBk
> ZWJpYW4ub3JnAAoJEAVMuPMTQ89E8vUP/iCUO04lUb4AauAGRemK+AlnyZnh++oM
> tuqA/FWYUX+iuIE3CyutJgCFGxIGru7Hc3kHtJchbeZM90DbTo/kDlH+M0T6+24i
> PMWLuHRWZScJVpOO3ZhJ4nni5/T1r+Q1BjUYYfB3Skvxwu6KNJCTWpBXUekgsMAx
> IGviP7jg7T1wNlxfLFLHkPaHDUOGQ9N8jqVJRJgBC5XF3aquGw6GVeS2HKISFSg0
> 83RdmmBlN38V9xOiggzKKIxj9OCcdVc17bGNUQsXmxYmhgoqbzE43F+CBE7JAqzH
> 9Z2GHTMJvha2hNKLaHoNEcXn6aJMEkszXaFFiILkO6diZbX971jp39KfnuVzQ7J5
> RypFZtVGXTQXvzPksalMDCVQgGzU5KBukb6Q0D9b2M49gMvWfCNrrwpTNu25+do4
> e/OMgIUgk7dsoUtBr9Iqa5saBP1NULFumWW2N8S1qAyvilOYryYCt2ZTsuvsi1cy
> NfVzUfyhyK1sY1HIDIz/+ufcfwWTNAh5TpfZeceeaKZDSDCPH3c/E/8NJxCP3mr6
> JLT3NXzCDe26YHqDjLKWnbZy9aYbyEpcnmgPA7KuRx+YLGyJ3B7xPIGPvEQsbCsJ
> UEQ126lBAtulJ1YiCHaGRcCJTS1W6cerPBYF34oTy5GyCky3xcHSnd0qEWXDlw6k
> fESUPZGDwiGd
> =agDJ
> -----END PGP SIGNATURE-----
>
>
> ---------- Forwarded message ----------
> From: "Martin-Éric Racine" <martin-eric.racine@iki.fi>
> To: Debian Bug Tracking System <submit@bugs.debian.org>
> Cc:
> Bcc:
> Date: Tue, 16 Aug 2022 06:57:22 +0300
> Subject: 5.10.0-17-686-pae: repeatedly crashes during initrd loading [PIII]
> Package: src:linux
> Version: 5.10.136-1
> Severity: grave
>
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA256
>
> 5.10.0-17-686-pae cannot boot on this Pentium III. The fan goes to full speed during initrd loading and the host reboots at that point. There is no screenshot to attach since there is no screen output after the "Loading initrd..." message from GRUB2.
>
> Reverting to 5.10.0-16-686-pae, the fan runs at low speed and the host boots normally.
>
> Martin-Éric
>
> - -- Package-specific info:
> processor : 0
> vendor_id : GenuineIntel
> cpu family : 6
> model : 8
> model name : Pentium III (Coppermine)
> stepping : 6
> microcode : 0x8
> cpu MHz : 865.440
> cache size : 256 KB
> physical id : 0
> siblings : 1
> core id : 0
> cpu cores : 1
> apicid : 0
> initial apicid : 0
> fdiv_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 2
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pse36 mmx fxsr sse cpuid pti
> bugs : cpu_meltdown spectre_v1 spectre_v2 spec_store_bypass l1tf mds swapgs itlb_multihit
> bogomips : 1730.88
> clflush size : 32
> cache_alignment : 32
> address sizes : 36 bits physical, 32 bits virtual
> power management:
>
> ** Kernel log: boot messages should be attached
>
> ** Model information
>
> ** PCI devices:
> 00:00.0 Host bridge [0600]: Intel Corporation 82815 815 Chipset Host Bridge and Memory Controller Hub [8086:1130] (rev 02)
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
> Latency: 0
> Region 0: Memory at 48000000 (32-bit, prefetchable) [size=64M]
> Capabilities: <access denied>
> Kernel driver in use: agpgart-intel
>
> 00:01.0 PCI bridge [0604]: Intel Corporation 82815 815 Chipset AGP Bridge [8086:1131] (rev 02) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
> I/O behind bridge: [disabled]
> Memory behind bridge: 41000000-421fffff [size=18M]
> Prefetchable memory behind bridge: 44000000-45ffffff [size=32M]
> Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA+ VGA16- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>
> 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 01) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
> I/O behind bridge: 00001000-00001fff [size=4K]
> Memory behind bridge: 40000000-405fffff [size=6M]
> Prefetchable memory behind bridge: 20000000-200fffff [size=1M]
> Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR+ NoISA+ VGA- VGA16- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>
> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801BA ISA Bridge (LPC) [8086:2440] (rev 01)
> Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Kernel driver in use: lpc_ich
> Kernel modules: intel_rng, lpc_ich
>
> 00:1f.1 IDE interface [0101]: Intel Corporation 82801BA IDE U100 Controller [8086:244b] (rev 01) (prog-if 80 [ISA Compatibility mode-only controller, supports bus mastering])
> Subsystem: Intel Corporation 82801BA IDE U100 Controller [8086:2411]
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Region 0: Memory at 000001f0 (32-bit, non-prefetchable) [virtual] [size=8]
> Region 1: Memory at 000003f0 (type 3, non-prefetchable) [virtual]
> Region 2: Memory at 00000170 (32-bit, non-prefetchable) [virtual] [size=8]
> Region 3: Memory at 00000370 (type 3, non-prefetchable) [virtual]
> Region 4: I/O ports at 2460 [virtual] [size=16]
> Kernel driver in use: ata_piix
> Kernel modules: ata_piix, ata_generic
>
> 00:1f.4 USB controller [0c03]: Intel Corporation 82801BA/BAM UHCI USB 1.1 Controller #2 [8086:2444] (rev 01) (prog-if 00 [UHCI])
> Subsystem: Intel Corporation 82801BA/BAM UHCI USB 1.1 Controller [8086:2411]
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin C routed to IRQ 23
> Region 4: I/O ports at 2440 [size=32]
> Kernel driver in use: uhci_hcd
> Kernel modules: uhci_hcd
>
> 00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801BA/BAM AC'97 Audio Controller [8086:2445] (rev 01)
> Subsystem: Compaq Computer Corporation 82801BA/BAM AC'97 Audio Controller [0e11:000e]
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin B routed to IRQ 17
> Region 0: I/O ports at 2000 [size=256]
> Region 1: I/O ports at 2400 [size=64]
> Kernel driver in use: snd_intel8x0
> Kernel modules: snd_intel8x0
>
> 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation NV5 [Riva TNT2 / TNT2 Pro] [10de:0028] (rev 15) (prog-if 00 [VGA controller])
> Subsystem: Compaq Computer Corporation NV5 [Riva TNT2 / TNT2 Pro] [0e11:001f]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64 (1250ns min, 250ns max)
> Interrupt: pin A routed to IRQ 18
> Region 0: Memory at 41000000 (32-bit, non-prefetchable) [size=16M]
> Region 1: Memory at 44000000 (32-bit, prefetchable) [size=32M]
> Expansion ROM at 000c0000 [virtual] [disabled] [size=128K]
> Capabilities: <access denied>
> Kernel driver in use: nouveau
> Kernel modules: nouveau
>
> 02:04.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8169 PCI Gigabit Ethernet Controller [10ec:8169] (rev 10)
> Subsystem: Realtek Semiconductor Co., Ltd. RTL8169/8110 Family PCI Gigabit Ethernet NIC [10ec:8169]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64 (8000ns min, 16000ns max), Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 16
> Region 0: I/O ports at 1000 [size=256]
> Region 1: Memory at 40100000 (32-bit, non-prefetchable) [size=256]
> Expansion ROM at 20000000 [virtual] [disabled] [size=128K]
> Capabilities: <access denied>
> Kernel driver in use: r8169
> Kernel modules: r8169
>
> 02:08.0 Ethernet controller [0200]: Intel Corporation 82801BA/BAM/CA/CAM Ethernet Controller [8086:2449] (rev 01)
> Subsystem: Compaq Computer Corporation EtherExpress PRO/100 VM [0e11:0012]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 66 (2000ns min, 14000ns max), Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 20
> Region 0: Memory at 40000000 (32-bit, non-prefetchable) [size=4K]
> Region 1: I/O ports at 1800 [size=64]
> Capabilities: <access denied>
> Kernel driver in use: e100
> Kernel modules: e100
>
> 02:09.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8169 PCI Gigabit Ethernet Controller [10ec:8169] (rev 10)
> Subsystem: Realtek Semiconductor Co., Ltd. RTL8169/8110 Family PCI Gigabit Ethernet NIC [10ec:8169]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64 (8000ns min, 16000ns max), Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 18
> Region 0: I/O ports at 1400 [size=256]
> Region 1: Memory at 40200000 (32-bit, non-prefetchable) [size=256]
> Expansion ROM at 20020000 [virtual] [disabled] [size=128K]
> Capabilities: <access denied>
> Kernel driver in use: r8169
> Kernel modules: r8169
>
> 02:0a.0 USB controller [0c03]: VIA Technologies, Inc. VT82xx/62xx UHCI USB 1.1 Controller [1106:3038] (rev 62) (prog-if 00 [UHCI])
> Subsystem: VIA Technologies, Inc. VT82xx/62xx UHCI USB 1.1 Controller [1106:3038]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 66, Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 21
> Region 4: I/O ports at 1840 [size=32]
> Capabilities: <access denied>
> Kernel driver in use: uhci_hcd
> Kernel modules: uhci_hcd
>
> 02:0a.1 USB controller [0c03]: VIA Technologies, Inc. VT82xx/62xx UHCI USB 1.1 Controller [1106:3038] (rev 62) (prog-if 00 [UHCI])
> Subsystem: VIA Technologies, Inc. VT82xx/62xx UHCI USB 1.1 Controller [1106:3038]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 66, Cache Line Size: 32 bytes
> Interrupt: pin B routed to IRQ 22
> Region 4: I/O ports at 1860 [size=32]
> Capabilities: <access denied>
> Kernel driver in use: uhci_hcd
> Kernel modules: uhci_hcd
>
> 02:0a.2 USB controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 65) (prog-if 20 [EHCI])
> Subsystem: VIA Technologies, Inc. USB 2.0 Controller [1106:3104]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 66, Cache Line Size: 32 bytes
> Interrupt: pin C routed to IRQ 16
> Region 0: Memory at 40300000 (32-bit, non-prefetchable) [size=256]
> Capabilities: <access denied>
> Kernel driver in use: ehci-pci
> Kernel modules: ehci_pci
>
>
> ** USB devices:
> Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>
>
> - -- System Information:
> Debian Release: 11.4
> APT prefers stable-updates
> APT policy: (500, 'stable-updates'), (500, 'stable-security'), (500, 'stable-debug'), (500, 'stable')
> Architecture: i386 (i686)
>
> Kernel: Linux 5.10.0-16-686-pae (SMP w/1 CPU thread)
> Locale: LANG=fi_FI.UTF-8, LC_CTYPE=fi_FI.UTF-8 (charmap=UTF-8), LANGUAGE=fi:en
> Shell: /bin/sh linked to /bin/dash
> Init: systemd (via /run/systemd/system)
> LSM: AppArmor: enabled
>
> Versions of packages linux-image-5.10.0-17-686-pae depends on:
> ii initramfs-tools [linux-initramfs-tool] 0.140
> ii kmod 28-1
> ii linux-base 4.6
>
> Versions of packages linux-image-5.10.0-17-686-pae recommends:
> ii apparmor 2.13.6-10
> ii firmware-linux-free 20200122-1
>
> Versions of packages linux-image-5.10.0-17-686-pae suggests:
> pn debian-kernel-handbook <none>
> ii grub-pc 2.04-20
> pn linux-doc-5.10 <none>
>
> Versions of packages linux-image-5.10.0-17-686-pae is related to:
> ii firmware-amd-graphics 20210315-3
> pn firmware-atheros <none>
> ii firmware-bnx2 20210315-3
> pn firmware-bnx2x <none>
> pn firmware-brcm80211 <none>
> pn firmware-cavium <none>
> pn firmware-intel-sound <none>
> pn firmware-intelwimax <none>
> pn firmware-ipw2x00 <none>
> pn firmware-ivtv <none>
> ii firmware-iwlwifi 20210315-3
> pn firmware-libertas <none>
> ii firmware-linux-nonfree 20210315-3
> ii firmware-misc-nonfree 20210315-3
> pn firmware-myricom <none>
> pn firmware-netxen <none>
> pn firmware-qlogic <none>
> ii firmware-realtek 20210315-3
> pn firmware-samsung <none>
> pn firmware-siano <none>
> pn firmware-ti-connectivity <none>
> pn xen-hypervisor <none>
>
> - -- no debconf information
>
> -----BEGIN PGP SIGNATURE-----
>
> iQIzBAEBCAAdFiEEyJACx3qL7GpObXOQrh+Cd8S017YFAmL7FZ4ACgkQrh+Cd8S0
> 17bSwRAAt8pHlQidSu4oZEixTcPgO6f42wNdBJXYjIyVBvRaI041n2GtLrnkv0nh
> z7EdrKCUkfe2K4NhNFv25gFY8Lgy+VRmsXP4jsBGjSnH4goNlKfH4unRx6mZCbQH
> Q4QlPvUrGUfVFTpZtApMG9rbAdU7mwzYGvKehj3kEfHNrWbutWUBdt93ky+RUR1g
> 7hc/DAqip/T9/FhwvS+URKlShTfXKpP8l9ulgYwLAHjiU9iVK094JEBPc23X6CYw
> n20fFe2BGHCR2kvOiBh+HvOw58kW6UMZfGqjWFy2lJVBB4S3xZkVPF8z1ass4EWI
> 8D6JbYq8LrYGobntXVX9XW+Oh0Ie1GLwojcuquZqUFUT+DF1ZgfPUGv3XktjpwX8
> xT6tcOBbLhja5vcgBhhXXFoo0jYezq1nu5AqZ85SK9UFfK45rGcZ3ax+XfYHjZi8
> 1N7u3mKKeW6FtCCKXLuGg/esy2HYDcHfirnccYI850QGkgFmC8UUIYwthQMultTE
> gWHctmHvwa9+2285le54kdzuvdeVusJQmVZVoLL/J0kK3RHZ+UAJuD75GbLrnQqD
> MoC3p/woRbdZk82IYq5rxcKHQc5aMKGri+f8rES1hGWq8kd/zleGHkLj1ale3eJh
> QIflvcTyOCMlyu1kxUDS6t1ITrInhLER7rMc0yNHXtSlOfc6qj4=
> =Sz/b
> -----END PGP SIGNATURE-----
Reply to: