[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#1018060: marked as done (linux-image-5.18.0-4-686-pae: crashes right away in switch_to_asm)

Your message dated Thu, 01 Sep 2022 14:10:11 +0000
with message-id <E1oTktX-002rlv-By@fasolo.debian.org>
and subject line Bug#1017425: fixed in linux 5.19.6-1
has caused the Debian Bug report #1017425,
regarding linux-image-5.18.0-4-686-pae: crashes right away in switch_to_asm
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
1017425: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1017425
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: src:linux
Version: 5.18.16-1
Severity: important

Dear Maintainer,

I'm usually running Debian stable on my Thinkpad X30 (a 2003 laptop
with a Pentium III CPU) but I also regularly try out Debian testing on
it to try and make sure I detect breakage before the next release.
This is one such breakage:

Debian testing seems to work fine with the 5.10 kernel from Debian
stable, but when I try to boot with the 5.18 kernel from Debian
testing (i.e. `linux-image-5.18.0-4-686-pae`), I get a kernel panic
right at the start (the timestamp says 0.3s after the start).

I'm not able to copy&paste the message I see on the screen, so I took
a photo instead (sorry).  There you can see one of the lines says:

    [0.3<something>] EIP: __switch_to_asm+0x43/0x5c

which suggests the kernel panic happened because of a problem in
__switch_to_asm.  I'm running the `...-686-pae` kernel usually (since the CPU
is a Pentium III), but just to be sure, I tried the `...-686` version for
older CPUs (i.e. `linux-image-5.18.0-4-686`), and got the same kernel panic.


	Stefan


PS: BTW, while I'm here I should mention that Buster is the best release
of Debian for this machine so far.  The previous best was a long time
ago, just before the switch to KMS (which introduced various regressions
on this hardware, some of which were only finally addressed in Buster).
So, congrats and thank you!


-- Package-specific info:
** Kernel log: boot messages should be attached

** Model information

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82830M/MG/MP Host Bridge [8086:3575] (rev 04)
	Subsystem: IBM ThinkPad A/T/X Series [1014:021d]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller [0300]: Intel Corporation 82830M/MG Integrated Graphics Controller [8086:3577] (rev 04) (prog-if 00 [VGA controller])
	Subsystem: IBM ThinkPad A/T/X Series [1014:0513]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M]
	Region 1: Memory at d0000000 (32-bit, non-prefetchable) [size=512K]
	Expansion ROM at 000c0000 [virtual] [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: i915
	Kernel modules: i915

00:02.1 Display controller [0380]: Intel Corporation 82830M/MG Integrated Graphics Controller [8086:3577]
	Subsystem: IBM ThinkPad A/T/X Series [1014:0513]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
	Region 1: Memory at d0080000 (32-bit, non-prefetchable) [size=512K]
	Capabilities: <access denied>
	Kernel modules: i915

00:1d.0 USB controller [0c03]: Intel Corporation 82801CA/CAM USB Controller #1 [8086:2482] (rev 02) (prog-if 00 [UHCI])
	Subsystem: IBM ThinkPad A/T/X Series [1014:0220]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 11
	Region 4: I/O ports at 1800 [size=32]
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci_hcd

00:1d.1 USB controller [0c03]: Intel Corporation 82801CA/CAM USB Controller #2 [8086:2484] (rev 02) (prog-if 00 [UHCI])
	Subsystem: IBM ThinkPad A/T/X Series [1014:0220]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 11
	Region 4: I/O ports at 1820 [size=32]
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci_hcd

00:1d.2 USB controller [0c03]: Intel Corporation 82801CA/CAM USB Controller #3 [8086:2487] (rev 02) (prog-if 00 [UHCI])
	Subsystem: IBM ThinkPad A/T/X Series [1014:0220]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 11
	Region 4: I/O ports at 1840 [size=32]
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 42) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=01, subordinate=07, sec-latency=168
	I/O behind bridge: 2000-6fff [size=20K] [16-bit]
	Memory behind bridge: d0200000-dfffffff [size=254M] [32-bit]
	Prefetchable memory behind bridge: f0000000-f7ffffff [size=128M] [32-bit]
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA+ VGA- VGA16- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:1f.0 ISA bridge [0601]: Intel Corporation 82801CAM ISA Bridge (LPC) [8086:248c] (rev 02)
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Kernel driver in use: lpc_ich
	Kernel modules: intel_rng, lpc_ich

00:1f.1 IDE interface [0101]: Intel Corporation 82801CAM IDE U100 Controller [8086:248a] (rev 02) (prog-if 8a [ISA Compatibility mode controller, supports both channels switched to PCI native mode, supports bus mastering])
	Subsystem: IBM ThinkPad A/T/X Series [1014:0220]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 11
	Region 0: I/O ports at 01f0 [size=8]
	Region 1: I/O ports at 03f4
	Region 2: I/O ports at 0170 [size=8]
	Region 3: I/O ports at 0374
	Region 4: I/O ports at 1860 [size=16]
	Region 5: Memory at 40000000 (32-bit, non-prefetchable) [size=1K]
	Kernel driver in use: ata_piix
	Kernel modules: ata_piix, ata_generic

00:1f.3 SMBus [0c05]: Intel Corporation 82801CA/CAM SMBus Controller [8086:2483] (rev 02)
	Subsystem: IBM ThinkPad A/T/X Series [1014:0220]
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin B routed to IRQ 11
	Region 4: I/O ports at 1880 [size=32]
	Kernel driver in use: i801_smbus
	Kernel modules: i2c_i801

00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801CA/CAM AC'97 Audio Controller [8086:2485] (rev 02)
	Subsystem: IBM ThinkPad A/T/X Series [1014:051c]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 11
	Region 0: I/O ports at 1c00 [size=256]
	Region 1: I/O ports at 18c0 [size=64]
	Kernel driver in use: snd_intel8x0
	Kernel modules: snd_intel8x0

01:00.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev a8)
	Subsystem: IBM ThinkPad A/T/X Series [1014:0185]
	Physical Slot: 1
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 168
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at 50000000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=01, secondary=02, subordinate=05, sec-latency=176
	Memory window 0: f0000000-f3ffffff (prefetchable)
	Memory window 1: d4000000-d7ffffff
	I/O window 0: 00002000-000020ff
	I/O window 1: 00002400-000024ff
	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
	16-bit legacy interface ports at 0001
	Capabilities: <access denied>
	Kernel driver in use: yenta_cardbus
	Kernel modules: yenta_socket

01:00.1 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev a8)
	Subsystem: IBM ThinkPad A/T/X Series [1014:0185]
	Physical Slot: 1
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 168
	Interrupt: pin B routed to IRQ 11
	Region 0: Memory at 50100000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=01, secondary=06, subordinate=06, sec-latency=176
	Memory window 0: f4000000-f7ffffff (prefetchable)
	Memory window 1: d8000000-dbffffff
	I/O window 0: 00002800-000028ff
	I/O window 1: 00002c00-00002cff
	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
	16-bit legacy interface ports at 0001
	Capabilities: <access denied>
	Kernel driver in use: yenta_cardbus
	Kernel modules: yenta_socket

01:00.2 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C552 IEEE 1394 Controller [1180:0552] (prog-if 10 [OHCI])
	Subsystem: IBM ThinkPad A/T/X Series [1014:0511]
	Physical Slot: 1
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (500ns min, 1000ns max)
	Interrupt: pin C routed to IRQ 11
	Region 0: Memory at d0211000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: <access denied>
	Kernel driver in use: firewire_ohci
	Kernel modules: firewire_ohci

01:02.0 Ethernet controller [0200]: Qualcomm Atheros AR5212/5213/2414 Wireless Network Adapter [168c:0013] (rev 01)
	Subsystem: AMBIT Microsystem Corp. AR5212/5213/2414 Wireless Network Adapter [1468:0406]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 168 (2500ns min, 7000ns max), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at d0200000 (32-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: ath5k
	Kernel modules: ath5k

01:08.0 Ethernet controller [0200]: Intel Corporation 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Controller [8086:1031] (rev 42)
	Subsystem: IBM ThinkPad A/T/X Series [1014:0209]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 66 (2000ns min, 14000ns max), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at d0210000 (32-bit, non-prefetchable) [size=4K]
	Region 1: I/O ports at 6000 [size=64]
	Capabilities: <access denied>
	Kernel driver in use: e100
	Kernel modules: e100


** USB devices:
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


-- System Information:
Debian Release: bookworm/sid
  APT prefers testing
  APT policy: (990, 'testing'), (500, 'stable-security'), (500, 'stable')
merged-usr: no
Architecture: i386 (i686)

Kernel: Linux 5.10.0-16-686-pae (SMP w/1 CPU thread)
Locale: LANG=fr_CH.UTF-8, LC_CTYPE=fr_CH.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages linux-image-5.18.0-4-686-pae depends on:
ii  initramfs-tools [linux-initramfs-tool]  0.142
ii  kmod                                    30+20220630-3
ii  linux-base                              4.9

Versions of packages linux-image-5.18.0-4-686-pae recommends:
ii  apparmor             3.0.7-1
ii  firmware-linux-free  20200122-1

Versions of packages linux-image-5.18.0-4-686-pae suggests:
pn  debian-kernel-handbook  <none>
ii  grub-pc                 2.06-3
pn  linux-doc-5.18          <none>

Versions of packages linux-image-5.18.0-4-686-pae is related to:
ii  firmware-amd-graphics     20210818-1
pn  firmware-atheros          <none>
pn  firmware-bnx2             <none>
pn  firmware-bnx2x            <none>
pn  firmware-brcm80211        <none>
pn  firmware-cavium           <none>
pn  firmware-intel-sound      <none>
pn  firmware-intelwimax       <none>
pn  firmware-ipw2x00          <none>
pn  firmware-ivtv             <none>
ii  firmware-iwlwifi          20210818-1
pn  firmware-libertas         <none>
ii  firmware-linux-nonfree    20210818-1
ii  firmware-misc-nonfree     20210818-1
pn  firmware-myricom          <none>
pn  firmware-netxen           <none>
pn  firmware-qlogic           <none>
pn  firmware-realtek          <none>
pn  firmware-samsung          <none>
pn  firmware-siano            <none>
pn  firmware-ti-connectivity  <none>
pn  xen-hypervisor            <none>

-- no debconf information

Attachment: IMG_20220824_145641.jpg
Description: Photo of kernel panic


--- End Message ---
--- Begin Message --- 
Source: linux
Source-Version: 5.19.6-1
Done: Salvatore Bonaccorso <carnil@debian.org>

We believe that the bug you reported is fixed in the latest version of
linux, which is due to be installed in the Debian FTP archive.

A summary of the changes between this version and the previous one is
attached.

Thank you for reporting the bug, which will now be closed.  If you
have further comments please address them to 1017425@bugs.debian.org,
and the maintainer will reopen the bug report if appropriate.

Debian distribution maintenance software
pp.
Salvatore Bonaccorso <carnil@debian.org> (supplier of updated linux package)

(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing ftpmaster@ftp-master.debian.org)


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512

Format: 1.8
Date: Thu, 01 Sep 2022 09:04:35 +0200
Source: linux
Architecture: source
Version: 5.19.6-1
Distribution: unstable
Urgency: medium
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Changed-By: Salvatore Bonaccorso <carnil@debian.org>
Closes: 1016807 1017425 1017894 1017972 1018752
Changes:
 linux (5.19.6-1) unstable; urgency=medium
 .
   * New upstream stable update:
     https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.19.1
     https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.19.2
     - Revert "net: usb: ax88179_178a needs FLAG_SEND_ZLP" (Closes: #1017894)
     https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.19.3
     https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.19.4
     https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.19.5
     https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.19.6
     - mm/gup: fix FOLL_FORCE COW security issue and remove FOLL_COW
       (CVE-2022-2590)
     - af_key: Do not call xfrm_probe_algs in parallel (CVE-2022-3028)
     - [x86] nospec: Unwreck the RSB stuffing
     - [x86] nospec: Fix i386 RSB stuffing (Closes: #1017425)
     - bpf: Don't use tnum_range on array range checking for poke descriptors
       (CVE-2022-2905)
 .
   [ Ben Hutchings ]
   * d/tests/kbuild: Fix default-flavour lookup for arches with no featuresets
   * d/tests/kbuild: Make flavour lookup verbose
   * d/lib/python/debian_linux, d/templates: Use variable for binary package
     name
   * lintian: Update overrides in linux-image-*-dbg for lintian 2.115
   * d/{signing_templates/,}rules.real: Run dh_lintian for all packages
   * [hppa,mips,mipsel,powerpc] lintian: Override error for 64-bit kernels
   * [mips64el,mipsel,ppc64el] lintian: Override error for unstripped vmlinux
   * [arm64] lintian: Override errors for vdso32.so in linux-image-*-dbg
   * android: Remove CONFIG_ANDROID:
     - Drop "wireguard: Clear keys after suspend despite CONFIG_ANDROID=y"
     - pm/sleep: Add PM_USERSPACE_AUTOSLEEP Kconfig
     - remove CONFIG_ANDROID
     - Enable/disable ANDROID_BINDER_IPC to match previous configuration
 .
   [ Vincent Blut ]
   * [x86] drivers/hwmon: Enable SENSORS_ASUS_WMI and SENSORS_ASUS_EC as
     modules
   * [x86] drivers/platform/x86: Enable NVIDIA_WMI_EC_BACKLIGHT as module
     (Closes: #1017972)
   * [arm64] drivers/spi: Enable SPI_GPIO and SPI_SUN6I as modules
     (Closes: #1016807)
 .
   [ Diederik de Haas ]
   * [arm64] drivers/gpu/drm/rockchip: Explicitly enable ROCKCHIP_VOP
 .
   [ Helge Deller ]
   * [hppa] Drop CONFIG_PATA_LEGACY for hppa architecture
 .
   [ Salvatore Bonaccorso ]
   * [rt] Refresh "rcutorture: Also force sched priority to timersd on boosting
     test."
   * Drop setting of CRYPTO_BLAKE2S
     crypto: blake2s shash module was removed upstream.
   * [arm] arch/arm/crypto: Enable CRYPTO_BLAKE2S_ARM
   * certs: Rotate to use the "Debian Secure Boot Signer 2022 - linux"
     certificate (Closes: #1018752)
   * Set ABI to 1
   * [hppa/parisc64] Drop explicit setting of 64BIT
Checksums-Sha1:
 42a3c472d3128c9f851b9416e674497e8ddfd252 251841 linux_5.19.6-1.dsc
 1aac6f7bbdd6de2d32a8e8da75b163d79383d207 133767148 linux_5.19.6.orig.tar.xz
 feabaae96187bad30f3967959c0c955fd050082c 1318072 linux_5.19.6-1.debian.tar.xz
 0db0b77cb3cdeee0a626e24fed1828d455bacb93 6975 linux_5.19.6-1_source.buildinfo
Checksums-Sha256:
 4cc09d519dbd22b1b2ca074b98c3caf101494982e170fafa858d6ee930b18b4f 251841 linux_5.19.6-1.dsc
 57b61adbafbd97e41da2153a2733ba3d3d2963c96d391ce57b29c0bb58010de4 133767148 linux_5.19.6.orig.tar.xz
 e3f6a4e6191a0e67678dacba4beea0dcf61fc0d90a96ceb79d993f41f4da9275 1318072 linux_5.19.6-1.debian.tar.xz
 6ed558d70babbcfcc1d648d319eac9e639b973693e68ee99d5121c38875edbdd 6975 linux_5.19.6-1_source.buildinfo
Files:
 08b47f7b67275e2180c0aa6b4d9dfe9e 251841 kernel optional linux_5.19.6-1.dsc
 f968bf5c2f82b1dc40754fde8bcbfddb 133767148 kernel optional linux_5.19.6.orig.tar.xz
 086b762bf7e3734ab211ecfad57d8c58 1318072 kernel optional linux_5.19.6-1.debian.tar.xz
 0db0c08b0dc5c25e6042db1c5feaffe3 6975 kernel optional linux_5.19.6-1_source.buildinfo

-----BEGIN PGP SIGNATURE-----
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=agDJ
-----END PGP SIGNATURE-----

--- End Message ---
Reply to: