This still affects 5.15.0-3-amd64: [624300.704569] usb 5-1: new full-speed USB device number 2 using ohci-pci [624300.901723] usb 5-1: New USB device found, idVendor=06cd, idProduct=011a, bcdDevice=80.01 [624300.901746] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [624300.903869] keyspan 5-1:1.0: Keyspan - (without firmware) converter detected [624300.904014] usb 5-1: firmware: direct-loading firmware keyspan/usa49wlc.fw [624304.121517] usb 5-1: ezusb_ihex_firmware_download - ezusb_writememory failed writing internal memory (-110 7F92 00000000b8cbdc0a 1) [624304.121545] usb 5-1: failed to load firmware "keyspan/usa49wlc.fw" [624304.121559] keyspan: probe of 5-1:1.0 failed with error -2 The patch applies with some fuzz but still solves the issue. Refreshed patch is attached. Has anyone already contacted upstream about this? I couldn't find anything related on the linux-usb ML. Cheers, sur5r -- ceterum censeo microsoftem esse delendam.
--- keyspan.c.orig 2022-02-01 15:27:35.472432892 +0100
+++ keyspan.c 2022-02-03 16:03:27.166653874 +0100
@@ -33,6 +33,8 @@
#include <linux/tty_flip.h>
#include <linux/module.h>
#include <linux/spinlock.h>
+#include <linux/firmware.h>
+#include <linux/ihex.h>
#include <linux/uaccess.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
@@ -599,6 +601,19 @@
#include "keyspan_usa67msg.h"
+static int ezusb_writememory(struct usb_device *dev, int address,
+ unsigned char *data, int length, __u8 request)
+{
+ if (!dev)
+ return -ENODEV;
+
+ return usb_control_msg_send(dev, 0, request,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ address, 0, data, length, 3000, GFP_KERNEL);
+}
+
+
+
static void keyspan_break_ctl(struct tty_struct *tty, int break_state)
{
struct usb_serial_port *port = tty->driver_data;
@@ -1599,7 +1614,10 @@
/* download the firmware to a pre-renumeration device */
static int keyspan_fake_startup(struct usb_serial *serial)
{
- char *fw_name;
+ int response;
+ const struct ihex_binrec *record;
+ char *fw_name;
+ const struct firmware *fw;
dev_dbg(&serial->dev->dev, "Keyspan startup version %04x product %04x\n",
le16_to_cpu(serial->dev->descriptor.bcdDevice),
@@ -1667,16 +1685,34 @@
return 1;
}
+ if (request_ihex_firmware(&fw, fw_name, &serial->dev->dev)) {
+ dev_err(&serial->dev->dev, "Required keyspan firmware image (%s) unavailable.\n", fw_name);
+ return 1;
+ }
+
dev_dbg(&serial->dev->dev, "Uploading Keyspan %s firmware.\n", fw_name);
- if (ezusb_fx1_ihex_firmware_download(serial->dev, fw_name) < 0) {
- dev_err(&serial->dev->dev, "failed to load firmware \"%s\"\n",
- fw_name);
- return -ENOENT;
- }
+ /* download the firmware image */
+ response = ezusb_fx1_set_reset(serial->dev, 1);
+
+ record = (const struct ihex_binrec *)fw->data;
- /* after downloading firmware Renumeration will occur in a
- moment and the new device will bind to the real driver */
+ while (record) {
+ response = ezusb_writememory(serial->dev, be32_to_cpu(record->addr),
+ (unsigned char *)record->data,
+ be16_to_cpu(record->len), 0xa0);
+ if (response < 0) {
+ dev_err(&serial->dev->dev, "ezusb_writememory failed for Keyspan firmware (%d %04X %p %d)\n",
+ response, be32_to_cpu(record->addr),
+ record->data, be16_to_cpu(record->len));
+ break;
+ }
+ record = ihex_next_binrec(record);
+ }
+ release_firmware(fw);
+ /* bring device out of reset. Renumeration will occur in a
+ moment and the new device will bind to the real driver */
+ response = ezusb_fx1_set_reset(serial->dev, 0);
/* we don't want this device to have a driver assigned to it. */
return 1;
Attachment:
pgpoZ2z0aPRg9.pgp
Description: OpenPGP digital signature