[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#879102: marked as done (linux-image-4.9.0-4-686-pae: SCSI timeouts on Dell PowerEdge 2650 with Perc RAID 3/Di (unable to boot))

Your message dated Sat, 16 Oct 2021 05:50:45 -0700 (PDT)
with message-id <616acaa5.1c69fb81.32dbb.1b50@mx.google.com>
and subject line Closing this bug (BTS maintenance for src:linux bugs)
has caused the Debian Bug report #879102,
regarding linux-image-4.9.0-4-686-pae: SCSI timeouts on Dell PowerEdge 2650 with Perc RAID 3/Di (unable to boot)
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
879102: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=879102
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: src:linux
Version: 4.9.51-1
Severity: important

Dear Maintainer,

On upgrade from Jessie to Etch, the kernel went from 3.16 (3.16.0-0.bpo.4-686-pae currently running) to 4.9 (tested 4.9.0-3-686-pae and 4.9.0-4-686-pae without more success).

When booting from 4.9, the kernel goes into an endless loop, complaining about SCSI abort/timeouts and never actually reaches a usable state.
Rebooting back to the older 3.16 kernel does not show the same issue.

I believe there has been some kernel timeout default changes in the kernel upstream.

Please help.
Thanks.

-- Package-specific info:
** Kernel log: boot messages should be attached

** Model information

** PCI devices:
00:00.0 Host bridge [0600]: Broadcom CMIC-WS Host Bridge (GC-LE chipset) [1166:0012] (rev 13)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:00.1 Host bridge [0600]: Broadcom CMIC-WS Host Bridge (GC-LE chipset) [1166:0012]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:00.2 Host bridge [0600]: Broadcom CMIC-LE [1166:0000]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:04.0 Unassigned class [ff00]: Dell Embedded Remote Access or ERA/O [1028:000c]
	Subsystem: Dell Embedded Remote Access or ERA/O [1028:000c]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at feb80000 (32-bit, prefetchable) [size=4K]
	Region 1: I/O ports at ecf8 [size=8]
	Region 2: I/O ports at ece8 [size=8]
	Expansion ROM at fe000000 [disabled] [size=64K]
	Capabilities: <access denied>

00:04.1 Unassigned class [ff00]: Dell Remote Access Card III [1028:0008]
	Subsystem: Dell Remote Access Card III [1028:0008]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin B routed to IRQ 23
	Region 0: Memory at fe102000 (32-bit, non-prefetchable) [size=4K]
	Region 1: I/O ports at ec80 [size=64]
	Region 2: Memory at feb00000 (32-bit, prefetchable) [size=512K]
	Capabilities: <access denied>
	Kernel driver in use: serial

00:04.2 Unassigned class [ff00]: Dell Embedded Remote Access: BMC/SMIC device [1028:000d]
	Subsystem: Dell Embedded Remote Access: BMC/SMIC device [1028:000d]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin C routed to IRQ 7
	Region 0: I/O ports at ecf4 [size=4]
	Capabilities: <access denied>

00:0e.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Rage XL PCI [1002:4752] (rev 27) (prog-if 00 [VGA controller])
	Subsystem: Dell Rage XL PCI [1028:0121]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping+ SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (2000ns min), Cache Line Size: 64 bytes
	Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
	Region 1: I/O ports at e800 [size=256]
	Region 2: Memory at fe101000 (32-bit, non-prefetchable) [size=4K]
	[virtual] Expansion ROM at c0000000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel modules: atyfb

00:0f.0 Host bridge [0600]: Broadcom CSB5 South Bridge [1166:0201] (rev 93)
	Subsystem: Broadcom CSB5 South Bridge [1166:0201]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 32
	Kernel driver in use: piix4_smbus
	Kernel modules: i2c_piix4

00:0f.1 IDE interface [0101]: Broadcom CSB5 IDE Controller [1166:0212] (rev 93) (prog-if 82 [Master PriP])
	Subsystem: Broadcom CSB5 IDE Controller [1166:0212]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64
	Region 0: I/O ports at 01f0 [size=8]
	Region 1: I/O ports at 03f4
	Region 2: I/O ports at 0170 [size=8]
	Region 3: I/O ports at 0374
	Region 4: I/O ports at 08b0 [size=16]
	Kernel driver in use: pata_serverworks
	Kernel modules: pata_serverworks, ata_generic

00:0f.2 USB controller [0c03]: Broadcom OSB4/CSB5 OHCI USB Controller [1166:0220] (rev 05) (prog-if 10 [OHCI])
	Subsystem: Broadcom OSB4/CSB5 OHCI USB Controller [1166:0220]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (20000ns max)
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at fe100000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci-pci
	Kernel modules: ohci_pci

00:0f.3 ISA bridge [0601]: Broadcom CSB5 LPC bridge [1166:0225]
	Subsystem: Broadcom CSB5 LPC bridge [1166:0230]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0

00:10.0 Host bridge [0600]: Broadcom CIOB-X2 PCI-X I/O Bridge [1166:0101] (rev 05)
	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Capabilities: <access denied>

00:10.2 Host bridge [0600]: Broadcom CIOB-X2 PCI-X I/O Bridge [1166:0101] (rev 05)
	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Capabilities: <access denied>

00:11.0 Host bridge [0600]: Broadcom CIOB-X2 PCI-X I/O Bridge [1166:0101] (rev 05)
	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Capabilities: <access denied>

00:11.2 Host bridge [0600]: Broadcom CIOB-X2 PCI-X I/O Bridge [1166:0101] (rev 05)
	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Capabilities: <access denied>

01:08.0 SCSI storage controller [0100]: Adaptec AHA-3960D / AIC-7899A U160/m [9005:00c0] (rev 01)
	Subsystem: Adaptec AHA-3960D U160/m [9005:f620]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (10000ns min, 6250ns max), Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 20
	BIST result: 00
	Region 0: I/O ports at dc00 [disabled] [size=256]
	Region 1: Memory at fcf01000 (64-bit, non-prefetchable) [size=4K]
	Expansion ROM at fce00000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: aic7xxx
	Kernel modules: aic7xxx

01:08.1 SCSI storage controller [0100]: Adaptec AHA-3960D / AIC-7899A U160/m [9005:00c0] (rev 01)
	Subsystem: Adaptec AHA-3960D U160/m [9005:f620]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (10000ns min, 6250ns max), Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 21
	BIST result: 00
	Region 0: I/O ports at d800 [disabled] [size=256]
	Region 1: Memory at fcf00000 (64-bit, non-prefetchable) [size=4K]
	Expansion ROM at c0020000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: aic7xxx
	Kernel modules: aic7xxx

03:06.0 Ethernet controller [0200]: Broadcom Limited NetXtreme BCM5701 Gigabit Ethernet [14e4:1645] (rev 15)
	Subsystem: Dell Broadcom BCM5701 1000Base-T [1028:0121]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (16000ns min), Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 28
	Region 0: Memory at fcd10000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: tg3
	Kernel modules: tg3

03:08.0 Ethernet controller [0200]: Broadcom Limited NetXtreme BCM5701 Gigabit Ethernet [14e4:1645] (rev 15)
	Subsystem: Dell Broadcom BCM5701 1000Base-T [1028:0121]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (16000ns min), Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 29
	Region 0: Memory at fcd00000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: tg3
	Kernel modules: tg3

04:08.0 PCI bridge [0604]: Intel Corporation 80303 I/O Processor PCI-to-PCI Bridge [8086:0309] (rev 01) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32, Cache Line Size: 64 bytes
	Bus: primary=04, secondary=05, subordinate=05, sec-latency=32
	I/O behind bridge: 0000a000-0000afff
	Memory behind bridge: fca00000-fcbfffff
	Prefetchable memory behind bridge: c0100000-c01fffff
	Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel modules: shpchp

04:08.1 RAID bus controller [0104]: Dell PowerEdge Expandable RAID Controller 3/Di [1028:000a] (rev 01)
	Subsystem: Dell PERC 3/DiB [Boxster] [1028:0121]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 30
	Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
	Expansion ROM at fc900000 [disabled] [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: aacraid
	Kernel modules: aacraid

05:06.0 SCSI storage controller [0100]: Adaptec RAID subsystem HBA [9005:00c5] (rev 01)
	Subsystem: Dell PowerEdge 2400,2500,2550,4400 [1028:00c5]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (10000ns min, 6250ns max), Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 5
	BIST result: 00
	Region 0: I/O ports at ac00 [size=256]
	Region 1: Memory at fcaff000 (64-bit, non-prefetchable) [size=4K]
	Expansion ROM at fcb00000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel modules: aic7xxx

05:06.1 SCSI storage controller [0100]: Adaptec RAID subsystem HBA [9005:00c5] (rev 01)
	Subsystem: Dell PowerEdge 2400,2500,2550,4400 [1028:00c5]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (10000ns min, 6250ns max), Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 11
	BIST result: 00
	Region 0: I/O ports at a800 [size=256]
	Region 1: Memory at fcafe000 (64-bit, non-prefetchable) [size=4K]
	Expansion ROM at c0100000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel modules: aic7xxx


** USB devices:
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


-- System Information:
Debian Release: 9.1
  APT prefers stable
  APT policy: (500, 'stable')
Architecture: i386 (i686)

Kernel: Linux 3.16.0-0.bpo.4-686-pae (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages linux-image-4.9.0-4-686-pae depends on:
ii  initramfs-tools [linux-initramfs-tool]  0.130
ii  kmod                                    23-2
ii  linux-base                              4.5

Versions of packages linux-image-4.9.0-4-686-pae recommends:
ii  firmware-linux-free  3.4
ii  irqbalance           1.1.0-2.3

Versions of packages linux-image-4.9.0-4-686-pae suggests:
pn  debian-kernel-handbook  <none>
ii  grub-pc                 2.02~beta3-5
pn  linux-doc-4.9           <none>

Versions of packages linux-image-4.9.0-4-686-pae is related to:
ii  firmware-amd-graphics     20161130-3
pn  firmware-atheros          <none>
pn  firmware-bnx2             <none>
pn  firmware-bnx2x            <none>
pn  firmware-brcm80211        <none>
pn  firmware-cavium           <none>
pn  firmware-intel-sound      <none>
pn  firmware-intelwimax       <none>
pn  firmware-ipw2x00          <none>
pn  firmware-ivtv             <none>
pn  firmware-iwlwifi          <none>
pn  firmware-libertas         <none>
ii  firmware-linux-nonfree    20161130-3
ii  firmware-misc-nonfree     20161130-3
pn  firmware-myricom          <none>
pn  firmware-netxen           <none>
pn  firmware-qlogic           <none>
pn  firmware-realtek          <none>
pn  firmware-samsung          <none>
pn  firmware-siano            <none>
pn  firmware-ti-connectivity  <none>
pn  xen-hypervisor            <none>

-- no debconf information

--- End Message ---
--- Begin Message --- 
Hi

This bug was filed for a very old kernel or the bug is old itself
without resolution.

If you can reproduce it with

- the current version in unstable/testing
- the latest kernel from backports

please reopen the bug, see https://www.debian.org/Bugs/server-control
for details.

Regards,
Salvatore

--- End Message ---
Reply to: