--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-3.16.0-4-586: boot now mostly either hangs or repeats, firewire_ohci on older laptop
- From: Shaddy Baddah <beryllium-bugs@shaddybaddah.name>
- Date: Tue, 12 Jan 2016 13:41:39 +1100
- Message-id: <569467E3.4010705@shaddybaddah.name>
Package: src:linux
Version: 3.16.7-ckt20-1+deb8u2
Severity: important
Dear Maintainer,
After upgrade of linux-image-3.16.0-4-586:i386 from
3.16.7-ckt20-1+deb8u1 to 3.16.7-ckt20-1+deb8u2 on my old Fujitsu P
Series Lifebook, an older Pentium M 1GHz laptop, the kernel boot up
mostly hangs. Mostly with a cleared screen with no information at all,
or otherwise with a message something like (hard to capture):
firewire_ohci 0000:02:00.0: IRQ 00030010 selfID AR_req busReset
continually being output to the console with no let-up.
Obviously from this bug report, you can see that I have managed to boot
with this kernel image. However, I had to append firmware_ohci.debug to
the kernel command line to do so. This unexpectedly worked around the
problem. Maybe it suggests a timing/race condition issue that is reduced
by having console I/O operations intermingle in the kernel operations.
-- Package-specific info:
** Version:
Linux version 3.16.0-4-586 (debian-kernel@lists.debian.org) (gcc version
4.8.4 (Debian 4.8.4-1) ) #1 Debian 3.16.7-ckt20-1+deb8u2 (2016-01-02)
** Command line:
BOOT_IMAGE=/vmlinuz-3.16.0-4-586 root=/dev/mapper/SBvolans-lv_root ro
firewire_ohci.debug=1
** Tainted: O (4096)
* Out-of-tree module has been loaded.
** Kernel log:
[ 9.345071] yenta_cardbus 0000:01:0a.1: pcmcia: parent PCI bridge
window: [io 0x3000-0x3fff]
[ 9.357657] pcmcia_socket pcmcia_socket1: cs: IO port probe
0x3000-0x3fff:
[ 9.382949] intel_rng: FWH not detected
[ 9.396670] ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
[ 9.404763] ipw2100: Copyright(c) 2003-2006 Intel Corporation
[ 9.451169] excluding 0x3000-0x30ff 0x3400-0x34ff 0x3800-0x38ff
0x3c00-0x3cff
[ 9.481270] yenta_cardbus 0000:01:0a.1: pcmcia: parent PCI bridge
window: [mem 0xd0200000-0xd02fffff]
[ 9.495905] pcmcia_socket pcmcia_socket1: cs: memory probe
0xd0200000-0xd02fffff:
[ 9.510692] excluding 0xd0200000-0xd020ffff
[ 9.516045] yenta_cardbus 0000:01:0a.1: pcmcia: parent PCI bridge
window: [mem 0x20000000-0x2bffffff pref]
[ 9.524042] pcmcia_socket pcmcia_socket1: cs: memory probe
0x20000000-0x2bffffff:
[ 9.538763] excluding 0x20000000-0x2bffffff
[ 9.561052] yenta_cardbus 0000:01:0a.3: enabling device (0080 -> 0083)
[ 9.567525] yenta_cardbus 0000:01:0a.3: CardBus bridge found [10cf:11c4]
[ 9.607010] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 9.704834] yenta_cardbus 0000:01:0a.3: ISA IRQ mask 0x04b8, PCI irq 11
[ 9.710285] yenta_cardbus 0000:01:0a.3: Socket status: 30000810
[ 9.715634] pci_bus 0000:01: Raising subordinate bus# of parent bus
(#01) from #06 to #0a
[ 9.728101] yenta_cardbus 0000:01:0a.3: pcmcia: parent PCI bridge
window: [io 0x3000-0x3fff]
[ 9.746663] pcmcia_socket pcmcia_socket2: cs: IO port probe
0x3000-0x3fff:
[ 9.761696] excluding 0x3000-0x30ff 0x3400-0x34ff 0x3800-0x38ff
0x3c00-0x3cff
[ 9.794863] yenta_cardbus 0000:01:0a.3: pcmcia: parent PCI bridge
window: [mem 0xd0200000-0xd02fffff]
[ 9.824285] pcmcia_socket pcmcia_socket2: cs: memory probe
0xd0200000-0xd02fffff:
[ 9.824313] excluding 0xd0200000-0xd020ffff
[ 9.824322] yenta_cardbus 0000:01:0a.3: pcmcia: parent PCI bridge
window: [mem 0x20000000-0x2bffffff pref]
[ 9.824327] pcmcia_socket pcmcia_socket2: cs: memory probe
0x20000000-0x2bffffff:
[ 9.824348] excluding 0x20000000-0x2bffffff
[ 9.834127] ipw2100: Detected Intel PRO/Wireless 2100 Network Connection
[ 9.836098] apanel: Fujitsu BIOS signature 'FJKEYINF' not found...
[ 9.843927] ipw2100 0000:01:0d.0: firmware: direct-loading firmware
ipw2100-1.3.fw
[ 9.936351] eth%d: Radio is disabled by RF switch.
[ 10.231312] iTCO_vendor_support: vendor-support=0
[ 10.300102] snd_intel8x0 0000:00:1f.5: intel8x0_measure_ac97_clock:
measured 55327 usecs (2666 samples)
[ 10.300110] snd_intel8x0 0000:00:1f.5: clocking to 48000
[ 10.311928] systemd-udevd[205]: renamed network interface eth1 to eth2
[ 10.369250] psmouse serio1: synaptics: Touchpad model: 1, fw: 5.9,
id: 0xf6eb1, caps: 0xa04753/0x2000/0x0, board id: 0, fw id: 13820
[ 10.414754] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio1/input/input7
[ 10.705058] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 10.705131] iTCO_wdt: Found a ICH4-M TCO device (Version=1,
TCOBASE=0xfc60)
[ 10.705992] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 10.727681] pcmcia_socket pcmcia_socket2: pccard: PCMCIA card
inserted into slot 2
[ 10.735824] pcmcia_socket pcmcia_socket2: cs: memory probe
0xd0210000-0xd02fffff:
[ 10.771569] cfg80211: World regulatory domain updated:
[ 10.771576] cfg80211: DFS Master region: unset
[ 10.771576] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 10.771583] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz),
(N/A, 2000 mBm), (N/A)
[ 10.771586] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz),
(N/A, 2000 mBm), (N/A)
[ 10.771589] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz),
(N/A, 2000 mBm), (N/A)
[ 10.771593] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz,
160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 10.771597] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz,
160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 10.771600] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz),
(N/A, 2000 mBm), (0 s)
[ 10.771603] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz),
(N/A, 2000 mBm), (N/A)
[ 10.771606] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz),
(N/A, 0 mBm), (N/A)
[ 10.871421] excluding 0xd02fe000-0xd030bfff
[ 10.877357] pcmcia 2.0: pcmcia: registering new device pcmcia2.0 (IRQ: 3)
[ 10.894742] EXT4-fs (dm-1): re-mounted. Opts: (null)
[ 10.901112] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 10.921219] Adding 524284k swap on /dev/mapper/SBvolans-lv_swap.
Priority:-1 extents:1 across:524284k FS
[ 11.171385] EXT4-fs (sda1): mounting ext2 file system using the ext4
subsystem
[ 11.188643] EXT4-fs (sda1): mounted filesystem without journal. Opts:
(null)
[ 11.498117] systemd-journald[190]: Received request to flush runtime
journal from PID 1
[ 11.776061] floppy0: no floppy controllers found
[ 11.780284] work still pending
[ 12.187360] 8139too 0000:01:0c.0 eth0: link up, 10Mbps, half-duplex,
lpa 0x0000
[ 82.943827] RPC: Registered named UNIX socket transport module.
[ 82.949157] RPC: Registered udp transport module.
[ 82.954289] RPC: Registered tcp transport module.
[ 82.959354] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 82.975811] FS-Cache: Loaded
[ 83.014878] FS-Cache: Netfs 'nfs' registered for caching
[ 83.057367] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 86.812516] [drm:i9xx_check_fifo_underruns] *ERROR* pipe B underrun
[ 86.855913] [drm:i9xx_set_fifo_underrun_reporting] *ERROR* pipe A
underrun
[ 86.944901] [drm:i9xx_set_fifo_underrun_reporting] *ERROR* pipe A
underrun
[ 93.387674] 8139too 0000:01:0c.0 eth0: link up, 10Mbps, half-duplex,
lpa 0x0000
[ 93.528977] 8139too 0000:01:0c.0 eth0: link up, 10Mbps, half-duplex,
lpa 0x0000
[ 171.168752] 8139too 0000:01:0c.0 eth0: link up, 10Mbps, half-duplex,
lpa 0x0000
[ 350.886334] [drm:i9xx_set_fifo_underrun_reporting] *ERROR* pipe A
underrun
[ 351.099984] [drm:i9xx_set_fifo_underrun_reporting] *ERROR* pipe A
underrun
[ 351.200071] [drm:i9xx_set_fifo_underrun_reporting] *ERROR* pipe A
underrun
[ 359.802455] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 359.943361] ISO 9660 Extensions: RRIP_1991A
[ 1821.724049] usb 3-1: new high-speed USB device number 3 using ehci-pci
[ 1821.859662] usb 3-1: New USB device found, idVendor=0480, idProduct=a006
[ 1821.859681] usb 3-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 1821.859691] usb 3-1: Product: External USB 3.0
[ 1821.859700] usb 3-1: Manufacturer: Toshiba
[ 1821.859708] usb 3-1: SerialNumber: 20120701025041
[ 1821.863726] usb-storage 3-1:1.0: USB Mass Storage device detected
[ 1821.868743] scsi3 : usb-storage 3-1:1.0
[ 1825.274083] scsi 3:0:0:0: Direct-Access TOSHIBA External USB 3.0
0101 PQ: 0 ANSI: 4
[ 1825.275665] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 1825.319562] sd 3:0:0:0: [sdb] 1953525165 512-byte logical blocks:
(1.00 TB/931 GiB)
[ 1825.337819] sd 3:0:0:0: [sdb] Write Protect is off
[ 1825.337836] sd 3:0:0:0: [sdb] Mode Sense: 3f 00 00 08
[ 1825.355905] sd 3:0:0:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1825.466352] sdb: sdb1
[ 1825.592968] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 1929.842387] [drm:i9xx_set_fifo_underrun_reporting] *ERROR* pipe A
underrun
[ 1929.918169] [drm:i9xx_set_fifo_underrun_reporting] *ERROR* pipe A
underrun
** Model information
not available
** Loaded modules:
nls_utf8
isofs
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
fscache
sunrpc
pata_pcmcia
iTCO_wdt
joydev
iTCO_vendor_support
input_polldev
pcspkr
psmouse
serio_raw
lpc_ich
snd_intel8x0m
snd_intel8x0
snd_ac97_codec
snd_pcm
snd_timer
snd
soundcore
ipw2100
libipw
cfg80211
pcmcia
ac97_bus
i2c_i801
rng_core
lib80211
rfkill
yenta_socket
pcmcia_rsrc
pcmcia_core
fujitsu_laptop
battery
irda
crc_ccitt
shpchp
ac
evdev
acpi_cpufreq
processor
vmhgfs(O)
vmw_vmci
fuse
parport_pc
ppdev
lp
parport
autofs4
ext4
crc16
mbcache
jbd2
dm_mod
sd_mod
crc_t10dif
crct10dif_generic
crct10dif_common
sg
sr_mod
cdrom
usb_storage
ata_generic
ata_piix
libata
firewire_ohci
scsi_mod
firewire_core
crc_itu_t
8139too
8139cp
mii
i915
ehci_pci
uhci_hcd
ehci_hcd
i2c_algo_bit
drm_kms_helper
video
usbcore
usb_common
drm
i2c_core
thermal_sys
button
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82852/82855 GM/GME/PM/GMV
Processor to I/O Controller [8086:3580] (rev 02)
Subsystem: Fujitsu Limited. Device [10cf:11d5]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at <unassigned> (32-bit, prefetchable)
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:00.1 System peripheral [0880]: Intel Corporation 82852/82855
GM/GME/PM/GMV Processor to I/O Controller [8086:3584] (rev 02)
Subsystem: Fujitsu Limited. Device [10cf:11d5]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.3 System peripheral [0880]: Intel Corporation 82852/82855
GM/GME/PM/GMV Processor to I/O Controller [8086:3585] (rev 02)
Subsystem: Fujitsu Limited. Device [10cf:11d5]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
00:02.0 VGA compatible controller [0300]: Intel Corporation 82852/855GM
Integrated Graphics Device [8086:3582] (rev 02) (prog-if 00 [VGA
controller])
Subsystem: Fujitsu Limited. Device [10cf:1211]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at d8000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at d0000000 (32-bit, non-prefetchable) [size=512K]
Region 2: I/O ports at 1800 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation 82852/855GM
Integrated Graphics Device [8086:3582] (rev 02)
Subsystem: Fujitsu Limited. Device [10cf:1211]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at d0080000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1d.0 USB controller [0c03]: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [8086:24c2] (rev 03)
(prog-if 00 [UHCI])
Subsystem: Fujitsu Limited. Device [10cf:11ab]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 4: I/O ports at 1820 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [8086:24c4] (rev 03)
(prog-if 00 [UHCI])
Subsystem: Fujitsu Limited. Device [10cf:11ab]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 11
Region 4: I/O ports at 1840 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801DB/DBM
(ICH4/ICH4-M) USB2 EHCI Controller [8086:24cd] (rev 03) (prog-if 20 [EHCI])
Subsystem: Fujitsu Limited. Device [10cf:11ab]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 11
Region 0: Memory at d0100000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev 83) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR+ INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=0a, sec-latency=64
I/O behind bridge: 00003000-00003fff
Memory behind bridge: d0200000-d02fffff
Prefetchable memory behind bridge: 20000000-2bffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:1f.0 ISA bridge [0601]: Intel Corporation 82801DBM (ICH4-M) LPC
Interface Bridge [8086:24cc] (rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel driver in use: lpc_ich
00:1f.1 IDE interface [0101]: Intel Corporation 82801DBM (ICH4-M) IDE
Controller [8086:24ca] (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: Fujitsu Limited. Device [10cf:11ab]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374
Region 4: I/O ports at 1810 [size=16]
Region 5: Memory at 2c000000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) SMBus Controller [8086:24c3] (rev 03)
Subsystem: Fujitsu Limited. Device [10cf:11ab]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 11
Region 4: I/O ports at 1860 [size=32]
Kernel driver in use: i801_smbus
00:1f.5 Multimedia audio controller [0401]: Intel Corporation
82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller [8086:24c5]
(rev 03)
Subsystem: Fujitsu Limited. Device [10cf:1200]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 11
Region 0: I/O ports at 1c00 [size=256]
Region 1: I/O ports at 1880 [size=64]
Region 2: Memory at d0100c00 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at d0100800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: snd_intel8x0
00:1f.6 Modem [0703]: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller [8086:24c6] (rev 03)
(prog-if 00 [Generic])
Subsystem: Fujitsu Limited. Device [10cf:10d1]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 11
Region 0: I/O ports at 2400 [size=256]
Region 1: I/O ports at 2000 [size=128]
Capabilities: <access denied>
Kernel driver in use: snd_intel8x0m
01:0a.0 CardBus bridge [0607]: O2 Micro, Inc. OZ711M3/MC3 4-in-1
MemoryCardBus Controller [1217:7223]
Subsystem: Fujitsu Limited. Lifebook P5020D Laptop [10cf:11c4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 396 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at d4000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=01, secondary=02, subordinate=02, sec-latency=176
Memory window 0: 20000000-23ffffff (prefetchable)
Memory window 1: e8000000-ebffffff
I/O window 0: 00003400-000034ff
I/O window 1: 00003800-000038ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Capabilities: <access denied>
Kernel driver in use: yenta_cardbus
01:0a.1 CardBus bridge [0607]: O2 Micro, Inc. OZ711M3/MC3 4-in-1
MemoryCardBus Controller [1217:7223]
Subsystem: Fujitsu Limited. Lifebook P5020D Laptop [10cf:11c4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin A routed to IRQ 11
Region 0: Memory at ec000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=01, secondary=03, subordinate=06, sec-latency=176
Memory window 0: 24000000-27ffffff (prefetchable)
Memory window 1: f0000000-f3ffffff
I/O window 0: 00003c00-00003cff
I/O window 1: 00004000-000040ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Capabilities: <access denied>
Kernel driver in use: yenta_cardbus
01:0a.2 System peripheral [0880]: O2 Micro, Inc. OZ711Mx 4-in-1
MemoryCardBus Accelerator [1217:7110]
Subsystem: Fujitsu Limited. Device [10cf:11c4]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 11
Region 0: Memory at d0204000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
01:0a.3 CardBus bridge [0607]: O2 Micro, Inc. OZ711M3/MC3 4-in-1
MemoryCardBus Controller [1217:7223]
Subsystem: Fujitsu Limited. Lifebook P5020D Laptop [10cf:11c4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 396 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f4000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=01, secondary=07, subordinate=0a, sec-latency=176
Memory window 0: 28000000-2bffffff (prefetchable)
Memory window 1: f8000000-fbffffff
I/O window 0: 00004400-000044ff
I/O window 1: 00004800-000048ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Capabilities: <access denied>
Kernel driver in use: yenta_cardbus
01:0c.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL-8100/8101L/8139 PCI Fast Ethernet Adapter [10ec:8139] (rev 10)
Subsystem: Fujitsu Limited. Device [10cf:11bd]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 3000 [size=256]
Region 1: Memory at d0205000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: 8139too
01:0d.0 Network controller [0280]: Intel Corporation PRO/Wireless LAN
2100 3B Mini PCI Adapter [8086:1043] (rev 04)
Subsystem: Intel Corporation Samsung X10/P30 integrated WLAN [8086:2522]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 8500ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at d0206000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ipw2100
01:0e.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB21
IEEE-1394a-2000 Controller (PHY/Link) [104c:8026] (prog-if 10 [OHCI])
Subsystem: Fujitsu Limited. Device [10cf:1162]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at d0205800 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at d0200000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
** USB devices:
not available
-- System Information:
Debian Release: 8.2
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 3.16.0-4-586
Locale: LANG=en_AU.UTF-8, LC_CTYPE=en_AU.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-3.16.0-4-586 depends on:
ii debconf [debconf-2.0] 1.5.56
ii initramfs-tools [linux-initramfs-tool] 0.120
ii kmod 18-3
ii linux-base 3.5
Versions of packages linux-image-3.16.0-4-586 recommends:
ii firmware-linux-free 3.3
Versions of packages linux-image-3.16.0-4-586 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02~beta2-22+deb8u1
pn linux-doc-3.16 <none>
Versions of packages linux-image-3.16.0-4-586 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
ii firmware-ipw2x00 0.43
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information excluded
--- End Message ---