[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#750354: marked as done (linux-image-3.2.0-4-kirkwood: usbip-core.ko and usbip-host.ko missing)

Your message dated Sat, 16 Oct 2021 02:19:33 -0700 (PDT)
with message-id <616a9925.1c69fb81.933ce.16b4@mx.google.com>
and subject line Closing this bug (BTS maintenance for src:linux bugs)
has caused the Debian Bug report #750354,
regarding linux-image-3.2.0-4-kirkwood: usbip-core.ko and usbip-host.ko missing
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
750354: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=750354
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: src:linux
Version: 3.2.57-3+deb7u1
Severity: important

Dear Maintainer,

modules "usbip-core.ko" and "usbip-host.ko" (and possibly other
usbip-related modules) are missing from the Debian kernel. As "usbip"
itself is offered as a package, I believe the modules should be present.

I suspect the modules' absence is due to the following line, extracted
from /boot/config-3.2.0-4-kirkwood:

> # CONFIG_USBIP_CORE is not set

* What led up to the situation?

$ apt-get install usbip
$ sudo usbipd -D
usbipd: error: please load usbip-core.ko and usbip-host.ko!
$ sudo modprobe usbip-core
FATAL: Module usbip-core not found.

* What outcome did you expect instead?

I expected the module(s) to load and, subsequently, usbip to work.

-- Package-specific info:
** Version:
Linux version 3.2.0-4-kirkwood (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 Debian 3.2.57-3

** Command line:
console=ttyS0,115200 root=/dev/ram initrd=0xa00000,0x900000 ramdisk=34816

** Tainted: C (1024)
 * Module from drivers/staging has been loaded.

** Kernel log:
[2070899.969390] Did not find alt setting 1 for intf 0, config 1
[2070945.026027] Did not find alt setting 1 for intf 0, config 1
[2070990.025258] Did not find alt setting 1 for intf 0, config 1
[2071035.024697] Did not find alt setting 1 for intf 0, config 1
[2071069.408365] Did not find alt setting 1 for intf 0, config 1
[2071071.422382] Did not find alt setting 1 for intf 0, config 1
[2071073.422756] Did not find alt setting 1 for intf 0, config 1
[2071075.423107] Did not find alt setting 1 for intf 0, config 1
[2071076.344966] usb 1-1.4.1: USB disconnect, device number 9
[2071087.587514] usb 1-1.4.1: new high-speed USB device number 10 using orion-ehci
[2071087.708092] usb 1-1.4.1: New USB device found, idVendor=03f0, idProduct=5611
[2071087.715525] usb 1-1.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[2071087.723284] usb 1-1.4.1: Product: Photosmart C3100 series
[2071087.728926] usb 1-1.4.1: Manufacturer: HP
[2071087.733130] usb 1-1.4.1: SerialNumber: CN738C300N04P9
[2071087.743934] usblp0: USB Bidirectional printer dev 10 if 1 alt 0 proto 2 vid 0x03F0 pid 0x5611
[2071087.766213] scsi7 : usb-storage 1-1.4.1:1.3
[2071088.784305] scsi 7:0:0:0: Direct-Access     HP       Photosmart C3180 1.00 PQ: 0 ANSI: 2
[2071088.795830] sd 7:0:0:0: Attached scsi generic sg2 type 0
[2071088.805155] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[2071188.195281] usblp0: removed
[2071188.199283] Did not find alt setting 1 for intf 0, config 1
[2071258.658264] Did not find alt setting 1 for intf 0, config 1
[2071303.657639] Did not find alt setting 1 for intf 0, config 1
[2071348.657189] Did not find alt setting 1 for intf 0, config 1
[2071393.657947] Did not find alt setting 1 for intf 0, config 1
[2071438.657431] Did not find alt setting 1 for intf 0, config 1
[2071483.657072] Did not find alt setting 1 for intf 0, config 1
[2071542.776966] usb 1-1.4.1: USB disconnect, device number 10
[2071555.812751] usb 1-1.4.1: new high-speed USB device number 11 using orion-ehci
[2071555.923467] usb 1-1.4.1: New USB device found, idVendor=03f0, idProduct=5611
[2071555.930830] usb 1-1.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[2071555.938571] usb 1-1.4.1: Product: Photosmart C3100 series
[2071555.944246] usb 1-1.4.1: Manufacturer: HP
[2071555.948446] usb 1-1.4.1: SerialNumber: CN738C300N04P9
[2071555.956686] usblp0: USB Bidirectional printer dev 11 if 1 alt 0 proto 2 vid 0x03F0 pid 0x5611
[2071556.037585] scsi8 : usb-storage 1-1.4.1:1.3
[2071557.035680] scsi 8:0:0:0: Direct-Access     HP       Photosmart C3180 1.00 PQ: 0 ANSI: 2
[2071557.047034] sd 8:0:0:0: Attached scsi generic sg2 type 0
[2071557.055650] sd 8:0:0:0: [sdc] Attached SCSI removable disk
[2071658.232967] usb 1-1.4.1: USB disconnect, device number 11
[2071658.239682] usblp0: removed
[2071670.499250] usb 1-1.4.1: new high-speed USB device number 12 using orion-ehci
[2071670.609866] usb 1-1.4.1: New USB device found, idVendor=03f0, idProduct=5611
[2071670.617130] usb 1-1.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[2071670.624848] usb 1-1.4.1: Product: Photosmart C3100 series
[2071670.630482] usb 1-1.4.1: Manufacturer: HP
[2071670.634680] usb 1-1.4.1: SerialNumber: CN738C300N04P9
[2071670.662883] usblp0: USB Bidirectional printer dev 12 if 1 alt 0 proto 2 vid 0x03F0 pid 0x5611
[2071670.715658] scsi9 : usb-storage 1-1.4.1:1.3
[2071671.719794] scsi 9:0:0:0: Direct-Access     HP       Photosmart C3180 1.00 PQ: 0 ANSI: 2
[2071671.733703] sd 9:0:0:0: Attached scsi generic sg2 type 0
[2071671.742153] sd 9:0:0:0: [sdc] Attached SCSI removable disk
[2071902.710106] usblp0: removed
[2071902.725344] Did not find alt setting 1 for intf 0, config 1
[2071956.944911] Did not find alt setting 1 for intf 0, config 1
[2072102.190400] Did not find alt setting 1 for intf 0, config 1
[2072155.218286] Did not find alt setting 1 for intf 0, config 1
[2072185.219128] Did not find alt setting 1 for intf 0, config 1
[2072270.254241] Did not find alt setting 1 for intf 0, config 1
[2072288.930411] Did not find alt setting 1 for intf 0, config 1
[2072349.377321] Did not find alt setting 1 for intf 0, config 1
[2073748.346142] Did not find alt setting 1 for intf 0, config 1
[2073822.225081] Did not find alt setting 1 for intf 0, config 1
[2074557.417154] Did not find alt setting 1 for intf 0, config 1
[2074557.417985] Did not find alt setting 1 for intf 0, config 1
[2074801.553679] Did not find alt setting 1 for intf 0, config 1
[2074819.645063] Did not find alt setting 1 for intf 0, config 1
[2074821.645406] Did not find alt setting 1 for intf 0, config 1
[2074823.645849] Did not find alt setting 1 for intf 0, config 1
[2074929.817791] Did not find alt setting 1 for intf 0, config 1
[2075117.011814] Did not find alt setting 1 for intf 0, config 1
[2075119.012238] Did not find alt setting 1 for intf 0, config 1
[2075121.012601] Did not find alt setting 1 for intf 0, config 1
[2075123.012977] Did not find alt setting 1 for intf 0, config 1
[2075125.013367] Did not find alt setting 1 for intf 0, config 1
[2075127.013761] Did not find alt setting 1 for intf 0, config 1
[2075351.288964] usb 1-1.4.1: USB disconnect, device number 12
[2499882.728614] usb 1-1.4.1: new high-speed USB device number 13 using orion-ehci
[2499882.842088] usb 1-1.4.1: New USB device found, idVendor=04b8, idProduct=0122
[2499882.849359] usb 1-1.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[2499882.857049] usb 1-1.4.1: Product: EPSON Scanner
[2499882.861806] usb 1-1.4.1: Manufacturer: EPSON
[2501472.922698] usb 1-1.4.1: usbfs: interface 0 claimed by usbfs while 'saned' sets config #1
[2502262.008968] usb 1-1.4.1: USB disconnect, device number 13
[2502274.533752] usb 1-1.4.1: new high-speed USB device number 14 using orion-ehci
[2502274.647220] usb 1-1.4.1: New USB device found, idVendor=04b8, idProduct=0122
[2502274.654504] usb 1-1.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[2502274.662197] usb 1-1.4.1: Product: EPSON Scanner
[2502274.666959] usb 1-1.4.1: Manufacturer: EPSON
[2503678.968969] usb 1-1.4.1: USB disconnect, device number 14
[2504217.832740] usb 1-1.4.1: new high-speed USB device number 15 using orion-ehci
[2504217.956343] usb 1-1.4.1: New USB device found, idVendor=04b8, idProduct=0122
[2504217.963634] usb 1-1.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[2504217.971328] usb 1-1.4.1: Product: EPSON Scanner
[2504217.976087] usb 1-1.4.1: Manufacturer: EPSON
[2504538.277319] usb 1-1.4.1: usbfs: interface 0 claimed by usbfs while 'scanimage' sets config #1
[2504669.988359] usb 1-1.4.1: usbfs: USBDEVFS_CONTROL failed cmd sane-find-scann rqt 128 rq 6 len 2 ret -110
[2504670.988303] usb 1-1.4.1: usbfs: USBDEVFS_CONTROL failed cmd sane-find-scann rqt 128 rq 6 len 2 ret -110
[2504748.792971] usb 1-1.4.1: USB disconnect, device number 15

** Model information
Processor	: Feroceon 88FR131 rev 1 (v5l)
Hardware	: QNAP TS-119/TS-219
Revision	: 0000

** Loaded modules:
usblp
tun
fuse
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
bridge
stp
ipv6
aufs(C)
loop
dm_crypt
sg
snd_usb_audio
snd_usbmidi_lib
snd_hwdep
snd_seq_midi
snd_seq_midi_event
snd_rawmidi
usbhid
snd_pcm
snd_page_alloc
snd_seq
snd_seq_device
snd_timer
snd
hid
soundcore
usb_storage
hmac
evdev
mv643xx_eth
sha1_generic
inet_lro
ehci_hcd
libphy
mv_cesa
aes_generic
usbcore
usb_common
gpio_keys
ext4
mbcache
jbd2
dm_mod
sd_mod
crc_t10dif
sata_mv
libata
scsi_mod

** PCI devices:

** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 003: ID 13fd:1840 Initio Corporation Shintaro SH23SDOCK Hard Drive Docker [INIC-1608L]
Bus 001 Device 004: ID 05e3:0605 Genesys Logic, Inc. USB 2.0 Hub [ednet]
Bus 001 Device 005: ID 0d8c:000c C-Media Electronics, Inc. Audio Adapter


-- System Information:
Debian Release: 7.5
  APT prefers stable-updates
  APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: armel (armv5tel)

Kernel: Linux 3.2.0-4-kirkwood
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-3.2.0-4-kirkwood depends on:
ii  debconf [debconf-2.0]                   1.5.49
ii  initramfs-tools [linux-initramfs-tool]  0.109.1
ii  kmod                                    9-3
ii  linux-base                              3.5
ii  module-init-tools                       9-3

Versions of packages linux-image-3.2.0-4-kirkwood recommends:
ii  firmware-linux-free  3.2
ii  uboot-mkimage        2012.04.01-2

Versions of packages linux-image-3.2.0-4-kirkwood suggests:
pn  debian-kernel-handbook  <none>
pn  fdutils                 <none>
pn  linux-doc-3.2           <none>

Versions of packages linux-image-3.2.0-4-kirkwood is related to:
pn  firmware-atheros        <none>
pn  firmware-bnx2           <none>
pn  firmware-bnx2x          <none>
pn  firmware-brcm80211      <none>
pn  firmware-intelwimax     <none>
pn  firmware-ipw2x00        <none>
pn  firmware-ivtv           <none>
pn  firmware-iwlwifi        <none>
pn  firmware-libertas       <none>
pn  firmware-linux          <none>
pn  firmware-linux-nonfree  <none>
pn  firmware-myricom        <none>
pn  firmware-netxen         <none>
pn  firmware-qlogic         <none>
pn  firmware-ralink         <none>
pn  firmware-realtek        <none>
pn  xen-hypervisor          <none>

-- debconf information:
  linux-image-3.2.0-4-kirkwood/prerm/removing-running-kernel-3.2.0-4-kirkwood: true
  linux-image-3.2.0-4-kirkwood/postinst/missing-firmware-3.2.0-4-kirkwood:
  linux-image-3.2.0-4-kirkwood/postinst/ignoring-ramdisk:
  linux-image-3.2.0-4-kirkwood/postinst/depmod-error-initrd-3.2.0-4-kirkwood: false

--- End Message ---
--- Begin Message --- 
Hi

This bug was filed for a very old kernel or the bug is old itself
without resolution.

If you can reproduce it with

- the current version in unstable/testing
- the latest kernel from backports

please reopen the bug, see https://www.debian.org/Bugs/server-control
for details.

Regards,
Salvatore

--- End Message ---
Reply to: