--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-3.2.0-4-amd64: kernel has issues with Port Multipliers
- From: Leslie A Rhorer <lrhorer@mygrande.net>
- Date: Sun, 07 Jul 2013 12:07:37 -0500
- Message-id: <20130707170737.7060.15115.reportbug@RAID-Server>
Package: src:linux
Version: 3.2.0-4-amd64
Severity: critical
Justification: breaks the whole system
Dear Maintainer,
The attempt to upgrade from Squeeze to Wheezy on this system has been a disaster. For this bug report, the kernel seems unable to deal proerly with the Port Multipliers in use by the RAID array which is the entire reason for the existence of the server. The array consists of eight 3TB hard drives in a RAID chassis employing two PMs. Upon boot, some number of drives fail to be registered by the system. Using the embedded eSATA ports, only three of 8 drives appear in /dev. Using a Silicon Image controller, only six of eight drives appear. Obviously, all the drives need to be available. There are no problems when booting the 2.6 kernel in Squeeze.
-- Package-specific info:
** Version:
Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.46-1
** Command line:
BOOT_IMAGE=/vmlinuz-3.2.0-4-amd64 root=UUID=5cbe8269-fec8-42db-889d-a1d57b0a797e ro acpi_enforce_resources=lax
** Not tainted
** Kernel log:
[ 99.241539] powernow-k8: 0 : pstate 0 (4000 MHz)
[ 99.241586] powernow-k8: 1 : pstate 1 (3400 MHz)
[ 99.241632] powernow-k8: 2 : pstate 2 (2800 MHz)
[ 99.241678] powernow-k8: 3 : pstate 3 (2100 MHz)
[ 99.241724] powernow-k8: 4 : pstate 4 (1400 MHz)
[ 99.384300] [drm] Initialized drm 1.1.0 20060810
[ 99.392493] usblp1: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x1604
[ 99.392595] usbcore: registered new interface driver usblp
[ 99.460740] MXM: GUID detected in BIOS
[ 99.461250] nouveau 0000:01:00.0: setting latency timer to 64
[ 99.461300] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x0a8180b1)
[ 99.472805] [drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS
[ 99.505793] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[ 99.550860] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 99.550917] [drm] nouveau 0000:01:00.0: Using VBIOS from PRAMIN
[ 99.550974] [drm] nouveau 0000:01:00.0: BIT BIOS found
[ 99.551028] [drm] nouveau 0000:01:00.0: Bios version 70.18.5f.00
[ 99.551084] [drm] nouveau 0000:01:00.0: TMDS table version 2.0
[ 99.551504] [drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do
[ 99.551553] [drm] nouveau 0000:01:00.0: DCB version 4.0
[ 99.551600] [drm] nouveau 0000:01:00.0: DCB outp 00: 01000302 00020030
[ 99.551648] [drm] nouveau 0000:01:00.0: DCB outp 01: 02000300 00000000
[ 99.551696] [drm] nouveau 0000:01:00.0: DCB outp 02: 02011362 00020010
[ 99.551744] [drm] nouveau 0000:01:00.0: DCB outp 03: 01022310 00000000
[ 99.551792] [drm] nouveau 0000:01:00.0: DCB conn 00: 00001030
[ 99.551871] [drm] nouveau 0000:01:00.0: DCB conn 01: 00002161
[ 99.551951] [drm] nouveau 0000:01:00.0: DCB conn 02: 00000200
[ 99.552039] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xD97D
[ 99.612638] [drm] nouveau 0000:01:00.0: 0xDC4A: Condition still not met after 20ms, skipping following opcodes
[ 99.632554] [drm] nouveau 0000:01:00.0: 0xDC4E: Condition still not met after 20ms, skipping following opcodes
[ 99.632649] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xDE28
[ 99.640428] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE9FB
[ 99.640509] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xEA14
[ 99.683119] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xEAFB
[ 99.683184] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xEB60
[ 99.703093] [drm] nouveau 0000:01:00.0: 0xD7F1: Condition still not met after 20ms, skipping following opcodes
[ 99.704431] [TTM] Zone kernel: Available graphics memory: 4049964 kiB
[ 99.704480] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 99.704528] [TTM] Initializing pool allocator
[ 99.704576] [TTM] Initializing DMA pool allocator
[ 99.704628] [drm] nouveau 0000:01:00.0: Detected 1024MiB VRAM (DDR3)
[ 99.727171] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[ 99.755346] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 99.755422] [drm] No driver support for vblank timestamp query.
[ 100.072060] [drm] nouveau 0000:01:00.0: 3 available performance level(s)
[ 100.072113] [drm] nouveau 0000:01:00.0: 0: core 135MHz shader 270MHz memory 135MHz voltage 850mV
[ 100.072174] [drm] nouveau 0000:01:00.0: 1: core 405MHz shader 810MHz memory 405MHz voltage 900mV
[ 100.072234] [drm] nouveau 0000:01:00.0: 3: core 520MHz shader 1238MHz memory 600MHz voltage 1000mV
[ 100.072294] [drm] nouveau 0000:01:00.0: c: core 405MHz shader 810MHz memory 405MHz voltage 900mV
[ 100.180522] [drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x310000, bo ffff880232835000
[ 100.180668] fbcon: nouveaufb (fb0) is primary device
[ 100.200823] Console: switching to colour frame buffer device 160x64
[ 100.202879] fb0: nouveaufb frame buffer device
[ 100.202891] drm: registered panic notifier
[ 100.202906] [drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 0
[ 100.203016] hda_intel: Disabling MSI
[ 100.203144] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[ 101.028153] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 101.060153] HDMI status: Codec=1 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 101.092154] HDMI status: Codec=2 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 101.124153] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 101.140297] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input7
[ 101.140471] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input8
[ 101.140665] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input9
[ 101.140840] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input10
[ 103.656419] EXT3-fs (md2): using internal journal
[ 103.877214] loop: module loaded
[ 104.090118] it87: Found IT8721F chip at 0x290, revision 1
[ 107.472917] r8169 0000:04:00.0: firmware: agent aborted loading rtl_nic/rtl8168f-1.fw (not found?)
[ 107.473618] r8169 0000:04:00.0: eth3: unable to load firmware patch rtl_nic/rtl8168f-1.fw (-2)
[ 107.485478] r8169 0000:04:00.0: eth3: link down
[ 107.486056] r8169 0000:04:00.0: eth3: link down
[ 107.490642] ADDRCONF(NETDEV_UP): eth3: link is not ready
[ 110.390920] r8169 0000:04:00.0: eth3: link up
[ 110.394881] ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready
[ 111.699503] RPC: Registered named UNIX socket transport module.
[ 111.700083] RPC: Registered udp transport module.
[ 111.700635] RPC: Registered tcp transport module.
[ 111.701187] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 111.751753] FS-Cache: Loaded
[ 111.781382] FS-Cache: Netfs 'nfs' registered for caching
[ 111.792971] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 114.916061] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 114.964975] NFSD: starting 90-second grace period
[ 120.533860] lp: driver loaded but no devices found
[ 120.559368] Bluetooth: Core ver 2.16
[ 120.560095] NET: Registered protocol family 31
[ 120.560726] Bluetooth: HCI device and connection manager initialized
[ 120.561465] Bluetooth: HCI socket layer initialized
[ 120.562291] Bluetooth: L2CAP socket layer initialized
[ 120.563117] Bluetooth: SCO socket layer initialized
[ 120.585652] ppdev: user-space parallel port driver
[ 120.670139] Bluetooth: RFCOMM TTY layer initialized
[ 120.670739] Bluetooth: RFCOMM socket layer initialized
[ 120.671320] Bluetooth: RFCOMM ver 1.11
[ 120.797921] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 120.798494] Bluetooth: BNEP filters: protocol multicast
[ 121.320073] eth3: no IPv6 routers present
[ 127.449207] tun: Universal TUN/TAP device driver, 1.6
[ 127.449819] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
** Model information
sys_vendor: To be filled by O.E.M.
product_name: To be filled by O.E.M.
product_version: To be filled by O.E.M.
chassis_vendor: To Be Filled By O.E.M.
chassis_version: To Be Filled By O.E.M.
bios_vendor: American Megatrends Inc.
bios_version: 1302
board_vendor: ASUSTeK COMPUTER INC.
board_name: M5A99X EVO R2.0
board_version: Rev 1.xx
** Loaded modules:
tun
bnep
parport_pc
rfcomm
ppdev
bluetooth
crc16
lp
cpufreq_conservative
parport
cpufreq_powersave
cpufreq_userspace
cpufreq_stats
battery
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
it87
hwmon_vid
k8temp
loop
snd_hda_codec_hdmi
snd_hda_codec_realtek
nouveau
snd_hda_intel
snd_hda_codec
video
ttm
usblp
drm_kms_helper
drm
power_supply
i2c_algo_bit
powernow_k8
snd_seq_midi
snd_hwdep
mperf
snd_seq_midi_event
snd_pcm_oss
snd_rawmidi
snd_mixer_oss
eeepc_wmi
psmouse
crc32c_intel
asus_wmi
snd_pcm
snd_seq
snd_page_alloc
ghash_clmulni_intel
sp5100_tco
i2c_piix4
snd_seq_device
snd_timer
edac_mce_amd
edac_core
fam15h_power
sparse_keymap
rfkill
k10temp
serio_raw
pcspkr
i2c_core
evdev
processor
shpchp
mxm_wmi
wmi
snd
soundcore
aesni_intel
thermal_sys
button
aes_x86_64
aes_generic
cryptd
ext3
mbcache
jbd
dm_mod
raid1
raid456
async_raid6_recov
async_memcpy
async_pq
async_xor
xor
async_tx
raid6_pq
md_mod
usbhid
sg
sr_mod
sd_mod
cdrom
crc_t10dif
hid
ohci_hcd
sata_sil24
xhci_hcd
ahci
libahci
ehci_hcd
usbcore
libata
scsi_mod
r8169
usb_common
mii
** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI bridge (external gfx0 port B) [1002:5a14] (rev 02)
Subsystem: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI bridge (external gfx0 port B) [1002:5a14]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Capabilities: <access denied>
00:02.0 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI bridge (PCI express gpp port B) [1002:5a16] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fd000000-fe0fffff
Prefetchable memory behind bridge: 00000000c0000000-00000000d1ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:03.0 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI bridge (PCI express gpp port C) [1002:5a17] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fe400000-fe4fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:04.0 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI bridge (PCI express gpp port D) [1002:5a18] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Prefetchable memory behind bridge: 00000000d2100000-00000000d21fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:05.0 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI bridge (PCI express gpp port E) [1002:5a19] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
Memory behind bridge: fe300000-fe3fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:06.0 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI bridge (PCI express gpp port F) [1002:5a1a] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fe200000-fe2fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:07.0 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI bridge (PCI express gpp port G) [1002:5a1b] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
Memory behind bridge: fe100000-fe1fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:11.0 SATA controller [0106]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] (rev 40) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:84dd]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at f040 [size=8]
Region 1: I/O ports at f030 [size=4]
Region 2: I/O ports at f020 [size=8]
Region 3: I/O ports at f010 [size=4]
Region 4: I/O ports at f000 [size=16]
Region 5: Memory at fe50b000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:12.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe50a000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:12.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe509000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:13.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at fe508000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 21
Region 0: Memory at fe507000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller [1002:4385] (rev 42)
Subsystem: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller [1002:4385]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: piix4_smbus
00:14.2 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) [1002:4383] (rev 40)
Subsystem: ASUSTeK Computer Inc. Device [1043:84fb]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe500000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] (rev 40)
Subsystem: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge [1002:4384] (rev 40) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=08, subordinate=08, sec-latency=64
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI])
Subsystem: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe506000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:16.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at fe505000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:16.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 23
Region 0: Memory at fe504000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 15h Processor Function 0 [1022:1600]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 15h Processor Function 1 [1022:1601]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 15h Processor Function 2 [1022:1602]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 15h Processor Function 3 [1022:1603]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k10temp
00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 15h Processor Function 4 [1022:1604]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: fam15h_power
00:18.5 Host bridge [0600]: Advanced Micro Devices [AMD] Family 15h Processor Function 5 [1022:1605]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GT218 [GeForce 8400 GS] [10de:10c3] (rev a2) (prog-if 00 [VGA controller])
Subsystem: eVga.com. Corp. Device [3842:1302]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 24
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at d0000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at e000 [size=128]
Expansion ROM at fe000000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: nouveau
01:00.1 Audio device [0403]: NVIDIA Corporation High Definition Audio Controller [10de:0be3] (rev a1)
Subsystem: eVga.com. Corp. Device [3842:1302]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 25
Region 0: Memory at fe080000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
02:00.0 PCI bridge [0604]: Intel Corporation Device [8086:032d] (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=02, secondary=03, subordinate=03, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fe400000-fe4fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
03:00.0 Mass storage controller [0180]: Silicon Image, Inc. SiI 3124 PCI-X Serial ATA Controller [1095:3124] (rev 02)
Subsystem: Silicon Image, Inc. SiI 3124 PCI-X Serial ATA Controller [1095:3124]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 28
Region 0: Memory at fe488000 (64-bit, non-prefetchable) [size=128]
Region 2: Memory at fe480000 (64-bit, non-prefetchable) [size=32K]
Region 4: I/O ports at d000 [size=16]
Expansion ROM at fe400000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: sata_sil24
04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 09)
Subsystem: ASUSTeK Computer Inc. Device [1043:8505]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 72
Region 0: I/O ports at c000 [size=256]
Region 2: Memory at d2104000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at d2100000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
05:00.0 USB controller [0c03]: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller [1b21:1042] (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8488]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at fe300000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
06:00.0 SATA controller [0106]: ASMedia Technology Inc. ASM1062 Serial ATA Controller [1b21:0612] (rev 01) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:84b7]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 73
Region 0: I/O ports at b050 [size=8]
Region 1: I/O ports at b040 [size=4]
Region 2: I/O ports at b030 [size=8]
Region 3: I/O ports at b020 [size=4]
Region 4: I/O ports at b000 [size=32]
Region 5: Memory at fe200000 (32-bit, non-prefetchable) [size=512]
Capabilities: <access denied>
Kernel driver in use: ahci
07:00.0 USB controller [0c03]: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller [1b21:1042] (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8488]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 50
Region 0: Memory at fe100000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 010 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 011 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 03f0:1604 Hewlett-Packard DeskJet 940c
Bus 006 Device 003: ID 09ae:0001 Tripp Lite
Bus 007 Device 002: ID 03f9:0100 KeyTronic Corp. KT-2001 Keyboard
Bus 007 Device 003: ID 15d9:0a4e Trust International B.V.
-- System Information:
Debian Release: 7.1
APT prefers stable
APT policy: (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-4-amd64 (SMP w/8 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-4-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
[ 70.916144] ata2: controller in dubious state, performing PORT_RST
[ 73.076043] ata2.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
[ 73.396143] ata2.00: hard resetting link
[ 73.780162] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 73.780229] ata2.02: hard resetting link
[ 74.148182] ata2.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 74.148248] ata2.03: hard resetting link
[ 74.516180] ata2.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 74.516273] ata2.04: hard resetting link
[ 75.016049] ata2.04: softreset failed (SRST command error)
[ 75.016099] ata2.04: failed to read SCR 0 (Emask=0x40)
[ 75.016145] ata2.04: reset failed (errno=-85), retrying in 10 secs
[ 84.516009] ata2.04: reset failed, giving up
[ 84.516056] ata2.04: failed to recover link after 3 tries, disabling
[ 84.516104] ata2.15: hard resetting link
[ 84.516150] ata2: controller in dubious state, performing PORT_RST
[ 86.676057] ata2.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
[ 87.316141] ata2.00: hard resetting link
[ 87.684166] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 87.684231] ata2.02: hard resetting link
[ 88.052179] ata2.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 88.052244] ata2.03: hard resetting link
[ 88.420164] ata2.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 88.420228] ata2.05: hard resetting link
[ 88.756238] ata2.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
[ 88.762115] ata2.00: ATA-8: WDC WD30EZRS-00J99B0, 80.00A80, max UDMA/133
[ 88.762165] ata2.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 88.768082] ata2.00: configured for UDMA/100
[ 88.772596] ata2.02: ATA-8: WDC WD30EZRS-00J99B0, 80.00A80, max UDMA/133
[ 88.772646] ata2.02: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 88.778131] ata2.02: configured for UDMA/100
[ 88.782644] ata2.03: ATA-8: WDC WD30EZRS-00J99B0, 80.00A80, max UDMA/133
[ 88.782694] ata2.03: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 88.787652] ata2.03: configured for UDMA/100
[ 88.787740] ata2: EH complete
--- End Message ---