--- Begin Message ---
Package: src:linux
Version: 4.19.194-1
Severity: normal
Dear Maintainer,
After upgrading from linux-image-4.19.0-16-amd64 to linux-image-4.19.0-17-amd64
attaching an unprivileged linux container fails with the message:
lxc-attach: debian-buster-amd64-basic: lsm/lsm.c: lsm_process_label_set_at: 174
Operation not permitted - Failed to set AppArmor label "unconfined"
Rebooting into linux-image-4.19.0-16-amd64 with no other changes, the lxc
system works as expected.
Regrads,
Mark Grant
-- Package-specific info:
** Version:
Linux version 4.19.0-17-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.194-1 (2021-06-10)
** Command line:
BOOT_IMAGE=/vmlinuz-4.19.0-17-amd64 root=/dev/mapper/priam--vg-root ro
** Not tainted
** Kernel log:
[ 14.211487] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 14.211554] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 14.351839] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[ 14.351896] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[ 14.351941] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[ 14.351981] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[ 14.352023] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[ 14.352071] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[ 14.352116] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[ 14.352164] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[ 14.352214] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[ 14.352257] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[ 14.562406] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 14.743100] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 14.815334] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 15.862180] audit: type=1400 audit(1624175633.583:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=651 comm="apparmor_parser"
[ 15.864947] audit: type=1400 audit(1624175633.583:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=651 comm="apparmor_parser"
[ 15.876271] audit: type=1400 audit(1624175633.595:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=650 comm="apparmor_parser"
[ 15.879040] audit: type=1400 audit(1624175633.595:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=650 comm="apparmor_parser"
[ 15.881633] audit: type=1400 audit(1624175633.595:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=650 comm="apparmor_parser"
[ 15.916140] audit: type=1400 audit(1624175633.635:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lxc-start" pid=654 comm="apparmor_parser"
[ 15.920983] audit: type=1400 audit(1624175633.639:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="virt-aa-helper" pid=649 comm="apparmor_parser"
[ 15.972116] audit: type=1400 audit(1624175633.691:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default" pid=659 comm="apparmor_parser"
[ 15.975071] audit: type=1400 audit(1624175633.691:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-cgns" pid=659 comm="apparmor_parser"
[ 15.977826] audit: type=1400 audit(1624175633.691:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-mounting" pid=659 comm="apparmor_parser"
[ 16.845248] usb 1-8: reset high-speed USB device number 3 using xhci_hcd
[ 17.604508] new mount options do not match the existing superblock, will be ignored
[ 17.807334] fuse init (API version 7.27)
[ 22.361782] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 22.363742] br0: port 1(enp6s0) entered blocking state
[ 22.364289] br0: port 1(enp6s0) entered disabled state
[ 22.364876] device enp6s0 entered promiscuous mode
[ 22.438716] r8169 0000:06:00.0: firmware: direct-loading firmware rtl_nic/rtl8168h-2.fw
[ 22.441377] Generic PHY r8169-600:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=r8169-600:00, irq=IGNORE)
[ 22.555996] r8169 0000:06:00.0 enp6s0: Link is Down
[ 22.563788] br0: port 1(enp6s0) entered blocking state
[ 22.566219] br0: port 1(enp6s0) entered forwarding state
[ 22.568706] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
[ 23.373003] br0: port 1(enp6s0) entered disabled state
[ 25.764949] r8169 0000:06:00.0 enp6s0: Link is Up - 1Gbps/Full - flow control off
[ 25.765470] br0: port 1(enp6s0) entered blocking state
[ 25.765974] br0: port 1(enp6s0) entered forwarding state
[ 25.766547] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
[ 33.257984] kauditd_printk_skb: 24 callbacks suppressed
[ 33.257985] audit: type=1400 audit(1624175650.979:36): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/usr/bin/lxc-start" pid=1007 comm="apparmor_parser"
[ 33.264960] audit: type=1400 audit(1624175650.983:37): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="lxc-container-default" pid=1011 comm="apparmor_parser"
[ 33.266274] audit: type=1400 audit(1624175650.983:38): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="lxc-container-default-cgns" pid=1011 comm="apparmor_parser"
[ 33.266275] audit: type=1400 audit(1624175650.983:39): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="lxc-container-default-with-mounting" pid=1011 comm="apparmor_parser"
[ 33.266276] audit: type=1400 audit(1624175650.983:40): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="lxc-container-default-with-nesting" pid=1011 comm="apparmor_parser"
[ 33.384726] audit: type=1400 audit(1624175651.103:41): apparmor="DENIED" operation="capable" profile="/usr/bin/freshclam" pid=985 comm="freshclam" capability=2 capname="dac_read_search"
[ 35.709581] FS-Cache: Loaded
[ 36.022764] FS-Cache: Netfs 'nfs' registered for caching
[ 36.115427] Key type dns_resolver registered
[ 36.313486] NFS: Registering the id_resolver key type
[ 36.314216] Key type id_resolver registered
[ 36.314953] Key type id_legacy registered
[ 37.035989] FS-Cache: Netfs 'cifs' registered for caching
[ 37.036053] Key type cifs.spnego registered
[ 37.036059] Key type cifs.idmap registered
[ 37.036217] No dialect specified on mount. Default has changed to a more secure dialect, SMB2.1 or later (e.g. SMB3), from CIFS (SMB1). To use the less secure SMB1 dialect to access old servers which do not support SMB3 (or SMB2.1) specify vers=1.0 on mount.
[ 42.598159] tun: Universal TUN/TAP device driver, 1.6
[ 42.627751] virbr0: port 1(virbr0-nic) entered blocking state
[ 42.627760] virbr0: port 1(virbr0-nic) entered disabled state
[ 42.627898] device virbr0-nic entered promiscuous mode
[ 43.082276] virbr0: port 1(virbr0-nic) entered blocking state
[ 43.082286] virbr0: port 1(virbr0-nic) entered listening state
[ 43.293081] virbr0: port 1(virbr0-nic) entered disabled state
[ 59.184482] [UFW BLOCK] IN=br0 OUT= MAC= SRC=2a00:23c7:5d67:0c01:b62e:99ff:fe8a:77fc DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=710578 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[ 59.184541] [UFW BLOCK] IN=br0 OUT= MAC= SRC=2a00:23c7:5d67:0c01:b62e:99ff:fe8a:77fc DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=122633 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[ 59.184580] [UFW BLOCK] IN=br0 OUT= MAC= SRC=fe80:0000:0000:0000:b62e:99ff:fe8a:77fc DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=267618 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[ 59.184615] [UFW BLOCK] IN=br0 OUT= MAC= SRC=fe80:0000:0000:0000:b62e:99ff:fe8a:77fc DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=323769 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[ 59.194964] [UFW BLOCK] IN=br0 OUT= MAC= SRC=2a00:23c7:5d67:0c01:b62e:99ff:fe8a:77fc DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=710578 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[ 59.195024] [UFW BLOCK] IN=br0 OUT= MAC= SRC=2a00:23c7:5d67:0c01:b62e:99ff:fe8a:77fc DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=122633 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[ 59.195065] [UFW BLOCK] IN=br0 OUT= MAC= SRC=fe80:0000:0000:0000:b62e:99ff:fe8a:77fc DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=267618 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[ 59.195103] [UFW BLOCK] IN=br0 OUT= MAC= SRC=fe80:0000:0000:0000:b62e:99ff:fe8a:77fc DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=323769 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[ 78.409997] rfkill: input handler disabled
[ 132.638345] IPv6: ADDRCONF(NETDEV_UP): veth0AMQ3Y: link is not ready
[ 132.638533] br0: port 2(veth0AMQ3Y) entered blocking state
[ 132.638535] br0: port 2(veth0AMQ3Y) entered disabled state
[ 132.638578] device veth0AMQ3Y entered promiscuous mode
[ 132.667939] eth0: renamed from veth0AMQ3Yp
[ 132.697784] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 132.697797] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 132.697836] IPv6: ADDRCONF(NETDEV_CHANGE): veth0AMQ3Y: link becomes ready
[ 132.697907] br0: port 2(veth0AMQ3Y) entered blocking state
[ 132.697910] br0: port 2(veth0AMQ3Y) entered forwarding state
[ 197.436761] br0: port 2(veth0AMQ3Y) entered disabled state
[ 198.272180] br0: port 2(veth0AMQ3Y) entered disabled state
[ 198.275822] device veth0AMQ3Y left promiscuous mode
[ 198.275831] br0: port 2(veth0AMQ3Y) entered disabled state
[ 5712.818255] IPv6: ADDRCONF(NETDEV_UP): veth4S1PT9: link is not ready
[ 5712.818395] br0: port 2(veth4S1PT9) entered blocking state
[ 5712.818396] br0: port 2(veth4S1PT9) entered disabled state
[ 5712.818427] device veth4S1PT9 entered promiscuous mode
[ 5712.854414] eth0: renamed from veth4S1PT9p
[ 5712.871382] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5712.872255] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 5712.872291] IPv6: ADDRCONF(NETDEV_CHANGE): veth4S1PT9: link becomes ready
[ 5712.872353] br0: port 2(veth4S1PT9) entered blocking state
[ 5712.872355] br0: port 2(veth4S1PT9) entered forwarding state
** Model information
sys_vendor: Gigabyte Technology Co., Ltd.
product_name: B365M DS3H
product_version: Default string
chassis_vendor: Default string
chassis_version: Default string
bios_vendor: American Megatrends Inc.
bios_version: F5
board_vendor: Gigabyte Technology Co., Ltd.
board_name: B365M DS3H
board_version: x.x
** Loaded modules:
veth
nft_chain_route_ipv4
xt_CHECKSUM
nft_chain_nat_ipv4
ipt_MASQUERADE
nf_nat_ipv4
tun
arc4
md4
sha512_ssse3
sha512_generic
cmac
nls_utf8
devlink
cifs
ccm
rpcsec_gss_krb5
auth_rpcgss
nfsv4
dns_resolver
nfs
lockd
grace
fscache
bridge
stp
llc
rfkill
fuse
binfmt_misc
snd_hda_codec_hdmi
snd_hda_codec_realtek
snd_hda_codec_generic
uvcvideo
intel_rapl
i915
x86_pkg_temp_thermal
intel_powerclamp
videobuf2_vmalloc
coretemp
kvm_intel
videobuf2_memops
videobuf2_v4l2
videobuf2_common
kvm
videodev
snd_usb_audio
media
snd_usbmidi_lib
snd_rawmidi
irqbypass
crct10dif_pclmul
snd_seq_device
joydev
snd_hda_intel
snd_hda_codec
crc32_pclmul
snd_hda_core
snd_hwdep
ghash_clmulni_intel
drm_kms_helper
snd_pcm
drm
snd_timer
intel_cstate
intel_uncore
mei_me
snd
i2c_algo_bit
intel_rapl_perf
iTCO_wdt
soundcore
wmi_bmof
iTCO_vendor_support
wmi
mei
sg
evdev
pcc_cpufreq
video
acpi_tad
pcspkr
button
acpi_pad
nf_log_ipv6
ip6t_REJECT
nf_reject_ipv6
xt_hl
ip6_tables
ip6t_rt
nf_log_ipv4
nf_log_common
ipt_REJECT
nf_reject_ipv4
xt_LOG
nft_limit
xt_limit
xt_addrtype
xt_tcpudp
xt_conntrack
nft_compat
nft_counter
nf_conntrack_netbios_ns
nf_conntrack_broadcast
nf_nat_ftp
nf_nat
nf_conntrack_ftp
nf_conntrack
nf_defrag_ipv6
nf_defrag_ipv4
libcrc32c
nf_tables
nfnetlink
parport_pc
ppdev
sunrpc
lp
parport
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
fscrypto
ecb
dm_mod
hid_generic
usbhid
hid
sr_mod
cdrom
sd_mod
crc32c_intel
ahci
xhci_pci
libahci
xhci_hcd
libata
aesni_intel
usbcore
r8169
aes_x86_64
crypto_simd
scsi_mod
cryptd
realtek
glue_helper
libphy
i2c_i801
usb_common
thermal
fan
** Network interface configuration:
source /etc/network/interfaces.d/*
auto lo
iface lo inet loopback
iface enp6s0 inet manual
iface enp6s0 inet6 manual
auto br0
iface br0 inet dhcp
bridge_ports enp6s0
bridge_stp off
bridge_fd 0
bridge_maxwait 0
iface br0 inet6 auto
accept_ra 1
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: enp6s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master br0 state UP group default qlen 1000
link/ether b4:2e:99:8a:77:fc brd ff:ff:ff:ff:ff:ff
3: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether b4:2e:99:8a:77:fc brd ff:ff:ff:ff:ff:ff
inet 192.168.62.162/24 brd 192.168.62.255 scope global dynamic br0
valid_lft 166830sec preferred_lft 166830sec
inet6 2a00:23c7:5d67:c01:b62e:99ff:fe8a:77fc/64 scope global dynamic mngtmpaddr
valid_lft 274sec preferred_lft 94sec
inet6 fe80::b62e:99ff:fe8a:77fc/64 scope link
valid_lft forever preferred_lft forever
4: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default qlen 1000
link/ether 52:54:00:ba:2c:ca brd ff:ff:ff:ff:ff:ff
inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0
valid_lft forever preferred_lft forever
5: virbr0-nic: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast master virbr0 state DOWN group default qlen 1000
link/ether 52:54:00:ba:2c:ca brd ff:ff:ff:ff:ff:ff
9: veth4S1PT9@if8: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master br0 state UP group default qlen 1000
link/ether fe:3d:19:0c:8a:93 brd ff:ff:ff:ff:ff:ff link-netnsid 0
inet6 fe80::fc3d:19ff:fe0c:8a93/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
veth4S1PT9: 3249 37 0 0 0 0 0 0 167818 1453 0 0 0 0 0 0
lo: 480 8 0 0 0 0 0 0 480 8 0 0 0 0 0 0
enp6s0: 1202558736 1191009 0 0 0 0 0 28193 1543567979 1544112 0 0 0 0 0 0
br0: 1185771626 1189388 0 0 0 0 0 28207 1543561603 1544045 0 0 0 0 0 0
virbr0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
virbr0-nic: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 8th Gen Core Processor Host Bridge/DRAM Registers [8086:3ec2] (rev 07)
Subsystem: Gigabyte Technology Co., Ltd 8th Gen Core Processor Host Bridge/DRAM Registers [1458:5000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: skl_uncore
00:02.0 VGA compatible controller [0300]: Intel Corporation UHD Graphics 630 (Desktop) [8086:3e92] (prog-if 00 [VGA controller])
Subsystem: Gigabyte Technology Co., Ltd UHD Graphics 630 (Desktop) [1458:d000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 136
Region 0: Memory at f6000000 (64-bit, non-prefetchable) [size=16M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:08.0 System peripheral [0880]: Intel Corporation Skylake Gaussian Mixture Model [8086:1911]
Subsystem: Gigabyte Technology Co., Ltd Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th Gen Core Processor Gaussian Mixture Model [1458:5000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f712e000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
00:14.0 USB controller [0c03]: Intel Corporation 200 Series/Z370 Chipset Family USB 3.0 xHCI Controller [8086:a2af] (prog-if 30 [XHCI])
Subsystem: Gigabyte Technology Co., Ltd 200 Series/Z370 Chipset Family USB 3.0 xHCI Controller [1458:5007]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 132
Region 0: Memory at f7110000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:16.0 Communication controller [0780]: Intel Corporation 200 Series PCH CSME HECI [8086:a2ba]
Subsystem: Gigabyte Technology Co., Ltd 200 Series PCH CSME HECI [1458:1c3a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 135
Region 0: Memory at f712d000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:17.0 SATA controller [0106]: Intel Corporation 200 Series PCH SATA controller [AHCI mode] [8086:a282] (prog-if 01 [AHCI 1.0])
Subsystem: Gigabyte Technology Co., Ltd 200 Series PCH SATA controller [AHCI mode] [1458:b005]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 133
Region 0: Memory at f7128000 (32-bit, non-prefetchable) [size=8K]
Region 1: Memory at f712c000 (32-bit, non-prefetchable) [size=256]
Region 2: I/O ports at f090 [size=8]
Region 3: I/O ports at f080 [size=4]
Region 4: I/O ports at f060 [size=32]
Region 5: Memory at f712b000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1b.0 PCI bridge [0604]: Intel Corporation 200 Series PCH PCI Express Root Port [8086:a2e9] (rev f0) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 122
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1b.3 PCI bridge [0604]: Intel Corporation 200 Series PCH PCI Express Root Port [8086:a2ea] (rev f0) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 123
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1b.4 PCI bridge [0604]: Intel Corporation 200 Series PCH PCI Express Root Port [8086:a2eb] (rev f0) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 124
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.0 PCI bridge [0604]: Intel Corporation 200 Series PCH PCI Express Root Port [8086:a292] (rev f0) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 125
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 200 Series PCH PCI Express Root Port [8086:a293] (rev f0) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 126
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 200 Series PCH PCI Express Root Port [8086:a294] (rev f0) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 127
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f7000000-f70fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 200 Series PCH PCI Express Root Port [8086:a295] (rev f0) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 128
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.6 PCI bridge [0604]: Intel Corporation 200 Series PCH PCI Express Root Port [8086:a296] (rev f0) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 129
Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.7 PCI bridge [0604]: Intel Corporation 200 Series PCH PCI Express Root Port [8086:a297] (rev f0) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 130
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 PCI bridge [0604]: Intel Corporation 200 Series PCH PCI Express Root Port [8086:a298] (rev f0) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 131
Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1f.0 ISA bridge [0601]: Intel Corporation Device [8086:a2cc]
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.2 Memory controller [0580]: Intel Corporation 200 Series/Z370 Chipset Family Power Management Controller [8086:a2a1]
Subsystem: Gigabyte Technology Co., Ltd 200 Series/Z370 Chipset Family Power Management Controller [1458:5001]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f7124000 (32-bit, non-prefetchable) [size=16K]
00:1f.3 Audio device [0403]: Intel Corporation 200 Series PCH HD Audio [8086:a2f0]
Subsystem: Gigabyte Technology Co., Ltd 200 Series PCH HD Audio [1458:a182]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 137
Region 0: Memory at f7120000 (64-bit, non-prefetchable) [size=16K]
Region 4: Memory at f7100000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1f.4 SMBus [0c05]: Intel Corporation 200 Series/Z370 Chipset Family SMBus Controller [8086:a2a3]
Subsystem: Gigabyte Technology Co., Ltd 200 Series/Z370 Chipset Family SMBus Controller [1458:5001]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f712a000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
06:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 16)
Subsystem: Gigabyte Technology Co., Ltd Onboard Ethernet [1458:e000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at e000 [size=256]
Region 2: Memory at f7004000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at f7000000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
** USB devices:
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 046d:0808 Logitech, Inc. Webcam C600
Bus 001 Device 005: ID 046d:c31c Logitech, Inc. Keyboard K120
Bus 001 Device 004: ID 046d:c077 Logitech, Inc. M105 Optical Mouse
Bus 001 Device 002: ID 1a40:0101 Terminus Technology Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 10.10
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 4.19.0-17-amd64 (SMP w/6 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8), LANGUAGE=en_GB:en (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-4.19.0-17-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.133+deb10u1
ii kmod 26-1
ii linux-base 4.6
Versions of packages linux-image-4.19.0-17-amd64 recommends:
ii apparmor 2.13.2-10
ii firmware-linux-free 3.4
Versions of packages linux-image-4.19.0-17-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02+dfsg1-20+deb10u4
pn linux-doc-4.19 <none>
Versions of packages linux-image-4.19.0-17-amd64 is related to:
pn firmware-amd-graphics <none>
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
ii firmware-misc-nonfree 20190114-2
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
ii firmware-realtek 20190114-2
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
--- End Message ---