--- Begin Message ---
- To: submit@bugs.debian.org
- Subject: ThinkPad X230: right touchpad button functions as left button when touchpad is touched
- From: Oliver Sander <sander@igpm.rwth-aachen.de>
- Date: Thu, 09 May 2013 21:58:03 +0200
- Message-id: <518BFFCB.1000308@igpm.rwth-aachen.de>
Package: src:linux
Version: 3.8.11-1
Severity: minor
Dear Maintainer,
I have a Lenovo ThinkPad X230, running Wheezy and the 3.8.11 kernel from today's unstable.
The touchpad works okay, in particular the two buttons do what they are supposed to do.
Unless, that is, I have a finger resting on the touchpad. Then the right button triggers
the same actions as the left button, until I remove my finger from the touchpad again.
This can be reproduced all the time. It has behaved that way for all kernels I tried
between 3.2 and the current one.
-- Package-specific info:
** Version:
Linux version 3.8-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Debian 3.8.11-1
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.8-1-amd64 root=UUID=64517d02-ab77-4577-9b35-cf21c25cb293 ro quiet
** Not tainted
** Kernel log:
[ 7214.785370] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 7214.799730] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 7214.815693] PM: Entering mem sleep
[ 7214.815737] Suspending console(s) (use no_console_suspend to debug)
[ 7214.944815] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 7214.947356] sd 0:0:0:0: [sda] Stopping disk
[ 7215.220319] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[ 7215.461905] ACPI: Cannot transition to non-D0 state from D3
[ 7215.529859] PM: suspend of devices complete after 715.862 msecs
[ 7215.529959] PM: late suspend of devices complete after 0.098 msecs
[ 7215.545793] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 7215.561626] ehci-pci 0000:00:1d.0: power state changed by ACPI to D3hot
[ 7215.561711] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[ 7215.577582] ehci-pci 0000:00:1a.0: power state changed by ACPI to D3hot
[ 7215.593603] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 7215.609500] xhci_hcd 0000:00:14.0: power state changed by ACPI to D3hot
[ 7215.609562] PM: noirq suspend of devices complete after 79.804 msecs
[ 7215.610158] ACPI: Preparing to enter system sleep state S3
[ 7215.781100] PM: Saving platform NVS memory
[ 7215.782526] Disabling non-boot CPUs ...
[ 7215.884811] smpboot: CPU 1 is now offline
[ 7215.886311] smpboot: CPU 2 is now offline
[ 7215.887712] smpboot: CPU 3 is now offline
[ 7215.888010] Extended CMOS year: 2000
[ 7215.888997] ACPI: Low-level resume complete
[ 7215.889035] PM: Restoring platform NVS memory
[ 7215.889413] Extended CMOS year: 2000
[ 7215.890003] microcode: CPU0 updated to revision 0x17, date = 2013-01-09
[ 7215.890019] Enabling non-boot CPUs ...
[ 7215.890107] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 7215.903962] microcode: CPU1 updated to revision 0x17, date = 2013-01-09
[ 7215.982038] CPU1 is up
[ 7215.982137] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 7215.995984] microcode: CPU2 updated to revision 0x17, date = 2013-01-09
[ 7216.073797] CPU2 is up
[ 7216.073896] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 7216.087758] microcode: CPU3 updated to revision 0x17, date = 2013-01-09
[ 7216.165568] CPU3 is up
[ 7216.168716] ACPI: Waking up from system sleep state S3
[ 7216.357034] ACPI: \_SB_.PCI0.LPC_.EC__.BAT1: docking
[ 7216.384952] ACPI: \_SB_.PCI0.LPC_.EC__.BAT1: Unable to dock!
[ 7216.516670] i915 0000:00:02.0: power state changed by ACPI to D0
[ 7216.532568] xhci_hcd 0000:00:14.0: power state changed by ACPI to D0
[ 7216.548586] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 7216.596417] ehci-pci 0000:00:1a.0: power state changed by ACPI to D0
[ 7216.612383] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 7216.628570] ehci-pci 0000:00:1d.0: power state changed by ACPI to D0
[ 7216.644305] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 7216.676489] sdhci-pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
[ 7216.692687] PM: noirq resume of devices complete after 176.536 msecs
[ 7216.692776] PM: early resume of devices complete after 0.065 msecs
[ 7216.692802] i915 0000:00:02.0: setting latency timer to 64
[ 7216.692805] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 7216.692849] mei 0000:00:16.0: irq 41 for MSI/MSI-X
[ 7216.692862] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[ 7216.692885] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 7216.692912] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 7216.692954] ahci 0000:00:1f.2: setting latency timer to 64
[ 7216.692971] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 7216.693124] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 7216.748103] tpm_tis 00:09: TPM is disabled/deactivated (0x6)
[ 7216.748562] Extended CMOS year: 2000
[ 7216.923718] usb 3-1.6: reset high-speed USB device number 5 using ehci-pci
[ 7217.035297] ata2: SATA link down (SStatus 0 SControl 300)
[ 7217.035349] ata5: SATA link down (SStatus 0 SControl 300)
[ 7217.043306] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 7217.043986] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 7217.043991] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 7217.044742] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 7217.044748] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 7217.045077] ata1.00: configured for UDMA/133
[ 7217.059320] sd 0:0:0:0: [sda] Starting disk
[ 7217.091310] usb 3-1.4: reset full-speed USB device number 4 using ehci-pci
[ 7217.185051] btusb 3-1.4:1.0: no reset_resume for driver btusb?
[ 7217.185055] btusb 3-1.4:1.1: no reset_resume for driver btusb?
[ 7217.195907] PM: resume of devices complete after 504.419 msecs
[ 7217.196237] PM: Finishing wakeup.
[ 7217.196237] Restarting tasks ... done.
[ 7217.203843] video LNXVIDEO:00: Restoring backlight state
[ 7217.542142] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 7217.645735] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 7217.645934] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 7217.646745] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[ 7217.654088] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 7217.898702] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 7218.292291] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[ 7224.334781] wlan0: authenticate with cc:5d:4e:db:c7:26
[ 7224.340341] wlan0: send auth to cc:5d:4e:db:c7:26 (try 1/3)
[ 7224.342633] wlan0: authenticated
[ 7224.344524] wlan0: associate with cc:5d:4e:db:c7:26 (try 1/3)
[ 7224.348294] wlan0: RX AssocResp from cc:5d:4e:db:c7:26 (capab=0x411 status=0 aid=1)
[ 7224.350720] wlan0: associated
[ 7224.350742] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 7224.350796] cfg80211: Calling CRDA for country: FR
[ 7224.353339] cfg80211: Regulatory domain changed to country: FR
[ 7224.353341] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 7224.353343] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 7224.353344] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 7224.353346] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 7224.353347] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
** Model information
sys_vendor: LENOVO
product_name: 2325CN9
product_version: ThinkPad X230
chassis_vendor: LENOVO
chassis_version: Not Available
bios_vendor: LENOVO
bios_version: G2ET33WW (1.13 )
board_vendor: LENOVO
board_name: 2325CN9
board_version: Not Defined
** Loaded modules:
parport_pc
ppdev
lp
parport
bnep
rfcomm
binfmt_misc
uinput
nfsd
auth_rpcgss
nfs_acl
nfs
lockd
dns_resolver
fscache
sunrpc
loop
snd_hda_codec_hdmi
snd_hda_codec_realtek
iTCO_wdt
iTCO_vendor_support
joydev
arc4
iwldvm
mac80211
btusb
uvcvideo
bluetooth
videobuf2_vmalloc
videobuf2_memops
videobuf2_core
videodev
media
coretemp
kvm
crc32c_intel
ghash_clmulni_intel
aesni_intel
aes_x86_64
ablk_helper
snd_hda_intel
cryptd
xts
lrw
snd_hda_codec
gf128mul
snd_hwdep
snd_pcm
snd_page_alloc
pcspkr
snd_seq
ac
snd_seq_device
battery
iwlwifi
psmouse
snd_timer
i2c_i801
evdev
lpc_ich
serio_raw
mfd_core
thinkpad_acpi
cfg80211
nvram
tpm_tis
rfkill
tpm
i915
snd
tpm_bios
drm_kms_helper
wmi
drm
i2c_algo_bit
mei
i2c_core
soundcore
video
acpi_cpufreq
mperf
button
processor
ext4
crc16
jbd2
mbcache
sg
sd_mod
crc_t10dif
microcode
ahci
libahci
sdhci_pci
libata
sdhci
mmc_core
scsi_mod
e1000e
ehci_pci
ehci_hcd
thermal
thermal_sys
xhci_hcd
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 3rd Gen Core processor DRAM Controller [8086:0154] (rev 09)
Subsystem: Lenovo Device [17aa:21fa]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA controller])
Subsystem: Lenovo Device [17aa:21fa]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 45
Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 5000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) (prog-if 30 [XHCI])
Subsystem: Lenovo Device [17aa:21fa]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 40
Region 0: Memory at f2520000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04)
Subsystem: Lenovo Device [17aa:21fa]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 41
Region 0: Memory at f2535000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei
00:16.3 Serial controller [0700]: Intel Corporation 7 Series/C210 Series Chipset Family KT Controller [8086:1e3d] (rev 04) (prog-if 02 [16550])
Subsystem: Lenovo Device [17aa:21fa]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 50b0 [size=8]
Region 1: Memory at f253c000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: serial
00:19.0 Ethernet controller [0200]: Intel Corporation 82579LM Gigabit Network Connection [8086:1502] (rev 04)
Subsystem: Lenovo Device [17aa:21f3]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 46
Region 0: Memory at f2500000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at f253b000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 5080 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) (prog-if 20 [EHCI])
Subsystem: Lenovo Device [17aa:21fa]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f253a000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04)
Subsystem: Lenovo Device [17aa:21fa]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 43
Region 0: Memory at f2530000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: f1d00000-f24fffff
Prefetchable memory behind bridge: 00000000f0400000-00000000f0bfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 [8086:1e12] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: f1c00000-f1cfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 [8086:1e14] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=0b, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f1400000-f1bfffff
Prefetchable memory behind bridge: 00000000f0c00000-00000000f13fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) (prog-if 20 [EHCI])
Subsystem: Lenovo Device [17aa:21fa]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f2539000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge [0601]: Intel Corporation QM77 Express Chipset LPC Controller [8086:1e55] (rev 04)
Subsystem: Lenovo Device [17aa:21fa]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Lenovo Device [17aa:21fa]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 42
Region 0: I/O ports at 50a8 [size=8]
Region 1: I/O ports at 50bc [size=4]
Region 2: I/O ports at 50a0 [size=8]
Region 3: I/O ports at 50b8 [size=4]
Region 4: I/O ports at 5060 [size=32]
Region 5: Memory at f2538000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04)
Subsystem: Lenovo Device [17aa:21fa]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f2534000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at efa0 [size=32]
Kernel driver in use: i801_smbus
02:00.0 System peripheral [0880]: Ricoh Co Ltd MMC/SD Host Controller [1180:e822] (rev 07) (prog-if 01)
Subsystem: Lenovo Device [17aa:21fa]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f1d00000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
03:00.0 Network controller [0280]: Intel Corporation Centrino Advanced-N 6205 [Taylor Peak] [8086:0085] (rev 34)
Subsystem: Intel Corporation Centrino Advanced-N 6205 AGN [8086:1311]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at f1c00000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
** USB devices:
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 003: ID 147e:2020 Upek
Bus 003 Device 004: ID 0a5c:21e6 Broadcom Corp.
Bus 003 Device 005: ID 04f2:b2ea Chicony Electronics Co., Ltd
-- System Information:
Debian Release: 7.0
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.8-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.8-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.110
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.8-1-amd64 recommends:
ii firmware-linux-free 3.2
Versions of packages linux-image-3.8-1-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-27+deb7u1
pn linux-doc-3.8 <none>
Versions of packages linux-image-3.8-1-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 0.36+wheezy.1
pn firmware-libertas <none>
pn firmware-linux <none>
ii firmware-linux-nonfree 0.36+wheezy.1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.8-1-amd64/postinst/depmod-error-initrd-3.8-1-amd64: false
linux-image-3.8-1-amd64/postinst/missing-firmware-3.8-1-amd64:
linux-image-3.8-1-amd64/postinst/ignoring-ramdisk:
linux-image-3.8-1-amd64/prerm/removing-running-kernel-3.8-1-amd64: true
--- End Message ---