--- Begin Message ---
- To: submit@bugs.debian.org
- Subject: linux-image-2.6.39-bpo.2-686-pae: hpacucli hangs when creating disks on cciss
- From: leo weppelman <leoweppelman@googlemail.com>
- Date: Wed, 5 Oct 2011 11:06:23 +0200
- Message-id: <CANGsaKBM6rO_WQjk7tgvnQh89zOPLR+Vtj8JK7cCqY7T1ic=YQ@mail.gmail.com>
Package: linux-2.6
Version: 2.6.39-3~bpo60+1
Severity: normal
Tags: patch
*** Please type your report below this line ***
During a FAI controlled installation of an HP ML350 G5 server, I create
disks on the raid controller using hpacucli, like:
echo "ctrl slot=0 ld all delete forced" | hpacucli
echo "ctrl slot=0 create type=ld drives=1I:1:1 raid=0" | hpacucli
echo "ctrl slot=0 create type=ld drives=1I:1:2 raid=0" | hpacucli
When I do this with the 2.6.39 kernel from squeeze-backports, I get
the following stack-trace:
[ 58.249142] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 240.760011] INFO: task .hpacucli:2049 blocked for more than 120 seconds.
[ 240.760873] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs"
disables this message.
[ 240.761494] f595b240 00003082 b54c80e5 00000015 f6803ec0 f59b7040
00000015 c148d1c0
[ 240.763070] 00408d37 00000000 c148d1c0 f595b240 c148d1c0 c148d1c0
c103bb9e c101bc43
[ 240.764112] 00000000 f5a62008 c12b2b89 00000000 f68071c0 f5a62000
f5a62008 f5a62000
[ 240.764117] Call Trace:
[ 240.764126] [<c103bb9e>] ? irq_exit+0x56/0x79
[ 240.764131] [<c101bc43>] ? smp_apic_timer_interrupt+0x6b/0x75
[ 240.764135] [<c12b2b89>] ? apic_timer_interrupt+0x31/0x38
[ 240.764143] [<c1028b55>] ? mutex_spin_on_owner+0x5d/0x64
[ 240.764148] [<c12b1675>] ? __mutex_lock_common+0xe9/0x13a
[ 240.764152] [<c12b16d5>] ? __mutex_lock_slowpath+0xf/0x11
[ 240.764155] [<c12b1766>] ? mutex_lock+0x17/0x24
[ 240.764157] [<c12b1766>] ? mutex_lock+0x17/0x24
[ 240.764164] [<f84c14b7>] ? cciss_unlocked_open+0x15/0x8a [cciss]
[ 240.764168] [<c10ed886>] ? __blkdev_get+0xb5/0x2f3
[ 240.764171] [<c10edc50>] ? blkdev_get+0x18c/0x270
[ 240.764175] [<c10dd034>] ? iget5_locked+0xbf/0xf7
[ 240.764178] [<c10ec7d0>] ? I_BDEV+0x4/0x4
[ 240.764180] [<c10dbe6b>] ? unlock_new_inode+0x31/0x36
[ 240.764183] [<c10ed1fa>] ? bdget+0xd9/0xdf
[ 240.764188] [<c114bcaf>] ? register_disk+0xb5/0x118
[ 240.764191] [<c114b2c1>] ? blk_register_region+0x1b/0x1f
[ 240.764194] [<c114bdd1>] ? add_disk+0xbf/0x1d6
[ 240.764197] [<c114a9b1>] ? disk_map_sector_rcu+0x95/0x95
[ 240.764200] [<c114b107>] ? get_disk+0x6a/0x6a
[ 240.764204] [<f84c1455>] ? cciss_add_disk+0xf7/0x111 [cciss]
[ 240.764209] [<f84c414b>] ? rebuild_lun_table+0x717/0x862 [cciss]
[ 240.764213] [<f84c4635>] ? do_ioctl+0x39f/0x7d6 [cciss]
[ 240.764217] [<c1025950>] ? ptep_set_access_flags+0x44/0x4b
[ 240.764221] [<c10273c3>] ? __kunmap_atomic+0x57/0x6c
[ 240.764225] [<c10adc89>] ? do_wp_page+0x33e/0x6f0
[ 240.764230] [<f84c4296>] ? rebuild_lun_table+0x862/0x862 [cciss]
[ 240.764234] [<c114a011>] ? __blkdev_driver_ioctl+0x1d/0x25
[ 240.764237] [<c114a8bd>] ? blkdev_ioctl+0x64d/0x684
[ 240.764240] [<c10ec939>] ? block_ioctl+0x2a/0x2f
[ 240.764242] [<c10ec939>] ? block_ioctl+0x2a/0x2f
[ 240.764245] [<c10ec90f>] ? nr_blockdev_pages+0x3c/0x3c
[ 240.764249] [<c10d779b>] ? do_vfs_ioctl+0x473/0x4be
[ 240.764252] [<c12b5013>] ? do_page_fault+0x345/0x361
[ 240.764255] [<c12b5000>] ? do_page_fault+0x332/0x361
[ 240.764258] [<c10b0cb0>] ? remove_vma+0x43/0x48
[ 240.764260] [<c10b19cf>] ? do_munmap+0x20c/0x226
[ 240.764263] [<c10d782a>] ? sys_ioctl+0x44/0x64
[ 240.764267] [<c12b769f>] ? sysenter_do_call+0x12/0x28
The problem seems to be that cciss_unlocked_open() is called through the
sequence do_ioctl() -> rebuild_lun_table(). So the driver is locking
against himself. The following patch fixes it:
diff -u a/drivers/block/cciss.c b/drivers/block/cciss.c
--- a/drivers/block/cciss.c 2011-10-05 09:39:15.000000000 +0200
+++ b/drivers/block/cciss.c 2011-10-05 09:42:49.000000000 +0200
@@ -1680,7 +1680,13 @@
case CCISS_DEREGDISK:
case CCISS_REGNEWD:
case CCISS_REVALIDVOLS:
- return rebuild_lun_table(h, 0, 1);
+ {
+ int ret;
+ mutex_unlock(&cciss_mutex);
+ ret = rebuild_lun_table(h, 0, 1);
+ mutex_lock(&cciss_mutex);
+ return ret;
+ }
case CCISS_GETLUNINFO:
return cciss_getluninfo(h, disk, argp);
case CCISS_PASSTHRU:
-- Package-specific info:
** Version:
Linux version 2.6.39-bpo.2-686-pae (Debian 2.6.39-3~bpo60+1)
(norbert@tretkowski.de) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 SMP
Thu Aug 4 11:02:22 UTC 2011
** Command line:
root=/dev/mapper/ahraid-root console=ttyS0 console=tty0 vga=normal
** Kernel log:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.39-bpo.2-686-pae (Debian
2.6.39-3~bpo60+1) (norbert@tretkowski.de) (gcc version 4.4.5 (Debian
4.4.5-8) ) #1 SMP Thu Aug 4 11:02:22 UTC 2011
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fe58000 (usable)
[ 0.000000] BIOS-e820: 000000003fe58000 - 000000003fe60000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003fe60000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.3 present.
[ 0.000000] DMI: HP ProLiant ML350 G5, BIOS D21 06/28/2007
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000
(usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x3fe58 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 040000000 mask FC0000000 uncachable
[ 0.000000] 1 base 080000000 mask F80000000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00f4f80] f4f80
[ 0.000000] initial memory mapped : 0 - 01a00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037800000 page 2M
[ 0.000000] 0037800000 - 00379fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 379fe000 @ 19fa000-1a00000
[ 0.000000] RAMDISK: 3f6b4000 - 3fe38000
[ 0.000000] Allocated new RAMDISK: 3727a000 - 379fdc7e
[ 0.000000] Move RAMDISK from 000000003f6b4000 - 000000003fe37c7d
to 3727a000 - 379fdc7d
[ 0.000000] ACPI: RSDP 000f4f00 00024 (v02 HP )
[ 0.000000] ACPI: XSDT 3fe58300 00054 (v01 HP D21 00000002
Ò? 0000162E)
[ 0.000000] ACPI: FACP 3fe58380 000F4 (v03 HP D21 00000002
Ò? 0000162E)
[ 0.000000] ACPI Warning: Invalid length for Pm1aControlBlock: 32,
using default 16 (20110316/tbfadt-610)
[ 0.000000] ACPI: DSDT 3fe58480 02685 (v01 HP DSDT 00000001
INTL 20030228)
[ 0.000000] ACPI: FACS 3fe580c0 00040
[ 0.000000] ACPI: SPCR 3fe58100 00050 (v01 HP SPCRRBSU 00000001
Ò? 0000162E)
[ 0.000000] ACPI: MCFG 3fe58180 0003C (v01 HP ProLiant 00000001
00000000)
[ 0.000000] ACPI: HPET 3fe581c0 00038 (v01 HP D21 00000002
Ò? 0000162E)
[ 0.000000] ACPI: SPMI 3fe58200 00040 (v05 HP ProLiant 00000001
Ò? 0000162E)
[ 0.000000] ACPI: APIC 3fe58240 0009E (v01 HP 00000083 00000002
00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 132MB HIGHMEM available.
[ 0.000000] 889MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 379fe000
[ 0.000000] low ram: 0 - 379fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000379fe
[ 0.000000] HighMem 0x000379fe -> 0x0003fe58
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003fe58
[ 0.000000] On node 0 totalpages: 261607
[ 0.000000] free_area_init_node: node 0, pgdat c14187c0,
node_mem_map f6a79200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1748 pages used for memmap
[ 0.000000] Normal zone: 221994 pages, LIFO batch:31
[ 0.000000] HighMem zone: 265 pages used for memmap
[ 0.000000] HighMem zone: 33617 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x908
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 6 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 64
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap:
40000000:bec00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32
nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @f6800000 s30976 r0 d22272 u262144
[ 0.000000] pcpu-alloc: s30976 r0 d22272 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 259562
[ 0.000000] Kernel command line:
BOOT_IMAGE=vmlinuz-2.6.39-bpo.2-686-pae
initrd=initrd.faiC-2.6.39-bpo.2-686-pae append ramdisk_size=8192
console=ttyS1 console=tty0
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000379fe:0003fe58)
[ 0.000000] Memory: 1023988k/1046880k available (2786k kernel code,
22440k reserved, 1434k data, 440k init, 135528k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
[ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
[ 0.000000] .init : 0xc1420000 - 0xc148e000 ( 440 kB)
[ 0.000000] .data : 0xc12b8810 - 0xc141f240 (1434 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12b8810 (2786 kB)
[ 0.000000] Checking if this processor honours the WP bit even in
supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:1280
[ 0.000000] CPU 0 irqstacks, hard=f600a000 soft=f600c000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS1] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1999.960 MHz processor.
[ 0.008004] Calibrating delay loop (skipped), value calculated
using timer frequency.. 3999.92 BogoMIPS (lpj=7999840)
[ 0.010212] pid_max: default: 32768 minimum: 301
[ 0.011122] Security Framework initialized
[ 0.012008] SELinux: Disabled at boot.
[ 0.012784] Mount-cache hash table entries: 512
[ 0.014015] Initializing cgroup subsys ns
[ 0.014824] ns_cgroup deprecated: consider using the
'clone_children' flag without the ns_cgroup.
[ 0.016005] Initializing cgroup subsys cpuacct
[ 0.016797] Initializing cgroup subsys memory
[ 0.017575] Initializing cgroup subsys devices
[ 0.018402] Initializing cgroup subsys freezer
[ 0.019162] Initializing cgroup subsys net_cls
[ 0.020004] Initializing cgroup subsys blkio
[ 0.020866] CPU: Physical Processor ID: 0
[ 0.021717] CPU: Processor Core ID: 0
[ 0.022516] mce: CPU supports 6 MCE banks
[ 0.024012] CPU0: Thermal monitoring enabled (TM2)
[ 0.024844] using mwait in idle threads.
[ 0.027005] ACPI: Core revision 20110316
[ 0.029409] Enabling APIC mode: Flat. Using 2 I/O APICs
[ 0.030581] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.071525] CPU0: Intel(R) Xeon(R) CPU 5130 @ 2.00GHz stepping 06
[ 0.076004] Performance Events: PEBS fmt0-, Core2 events, Broken
BIOS detected, complain to your hardware vendor.
[ 0.076004] [Firmware Bug]: the BIOS has corrupted hw-PMU resources
(MSR 186 is 43003c)
[ 0.076004] Intel PMU driver.
[ 0.076005] PEBS disabled due to CPU errata.
[ 0.076678] ... version: 2
[ 0.077581] ... bit width: 40
[ 0.078456] ... generic registers: 2
[ 0.079349] ... value mask: 000000ffffffffff
[ 0.080005] ... max period: 000000007fffffff
[ 0.081077] ... fixed-purpose events: 3
[ 0.081934] ... event mask: 0000000700000003
[ 0.084311] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.085507] CPU 1 irqstacks, hard=f6116000 soft=f6118000
[ 0.085510] Booting Node 0, Processors #1
[ 0.086377] smpboot cpu 1: start_ip = 9b000
[ 0.012000] Initializing CPU#1
[ 0.180044] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.181240] Brought up 2 CPUs
[ 0.181871] Total of 2 processors activated (8000.06 BogoMIPS).
[ 0.184151] devtmpfs: initialized
[ 0.185014] print_constraints: dummy:
[ 0.185099] NET: Registered protocol family 16
[ 0.186139] ACPI: bus type pci registered
[ 0.188155] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.189954] PCI: not using MMCONFIG
[ 0.190982] PCI : PCI BIOS aera is rw and x. Use pci=nobios if you
want it NX.
[ 0.192017] PCI: PCI BIOS revision 3.00 entry at 0xf0072, last bus=25
[ 0.193279] PCI: Using configuration type 1 for base access
[ 0.194807] bio: create slab <bio-0> at 0
[ 0.196644] ACPI: EC: Look up EC in DSDT
[ 0.198091] ACPI: Interpreter enabled
[ 0.198840] ACPI: (supports S0 S4 S5)
[ 0.199644] ACPI: Using IOAPIC for interrupt routing
[ 0.200035] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.202010] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved
in ACPI motherboard resources
[ 0.204014] PCI: Using MMCONFIG for extended config space
[ 0.214432] ACPI: No dock devices found.
[ 0.215261] HEST: Table not found.
[ 0.216018] PCI: Ignoring host bridge windows from ACPI; if
necessary, use "pci=use_crs" and report a bug
[ 0.217425] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7f])
[ 0.218801] pci_root PNP0A03:00: host bridge window [io
0x0000-0x0cf7] (ignored)
[ 0.218805] pci_root PNP0A03:00: host bridge window [io
0x0d00-0xffff] (ignored)
[ 0.218808] pci_root PNP0A03:00: host bridge window [mem
0x000a0000-0x000bffff] (ignored)
[ 0.218811] pci_root PNP0A03:00: host bridge window [mem
0x40000000-0xdfffffff] (ignored)
[ 0.218814] pci_root PNP0A03:00: host bridge window [mem
0xf0000000-0xfebfffff] (ignored)
[ 0.218829] pci 0000:00:00.0: [8086:25d0] type 0 class 0x000600
[ 0.218870] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 0.218874] pci 0000:00:00.0: PME# disabled
[ 0.218894] pci 0000:00:02.0: [8086:25f7] type 1 class 0x000604
[ 0.218930] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.218933] pci 0000:00:02.0: PME# disabled
[ 0.218950] pci 0000:00:03.0: [8086:25e3] type 1 class 0x000604
[ 0.218986] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.218989] pci 0000:00:03.0: PME# disabled
[ 0.219006] pci 0000:00:04.0: [8086:25e4] type 1 class 0x000604
[ 0.219042] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.219045] pci 0000:00:04.0: PME# disabled
[ 0.219062] pci 0000:00:05.0: [8086:25e5] type 1 class 0x000604
[ 0.219097] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.219101] pci 0000:00:05.0: PME# disabled
[ 0.219123] pci 0000:00:10.0: [8086:25f0] type 0 class 0x000600
[ 0.219152] pci 0000:00:10.1: [8086:25f0] type 0 class 0x000600
[ 0.219182] pci 0000:00:10.2: [8086:25f0] type 0 class 0x000600
[ 0.219215] pci 0000:00:11.0: [8086:25f1] type 0 class 0x000600
[ 0.219245] pci 0000:00:13.0: [8086:25f3] type 0 class 0x000600
[ 0.219275] pci 0000:00:15.0: [8086:25f5] type 0 class 0x000600
[ 0.219306] pci 0000:00:16.0: [8086:25f6] type 0 class 0x000600
[ 0.219344] pci 0000:00:1c.0: [8086:2690] type 1 class 0x000604
[ 0.219400] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.219404] pci 0000:00:1c.0: PME# disabled
[ 0.219432] pci 0000:00:1d.0: [8086:2688] type 0 class 0x000c03
[ 0.219484] pci 0000:00:1d.0: reg 20: [io 0x1000-0x101f]
[ 0.219520] pci 0000:00:1d.1: [8086:2689] type 0 class 0x000c03
[ 0.220021] pci 0000:00:1d.1: reg 20: [io 0x1020-0x103f]
[ 0.220057] pci 0000:00:1d.2: [8086:268a] type 0 class 0x000c03
[ 0.220102] pci 0000:00:1d.2: reg 20: [io 0x1040-0x105f]
[ 0.220132] pci 0000:00:1d.3: [8086:268b] type 0 class 0x000c03
[ 0.220180] pci 0000:00:1d.3: reg 20: [io 0x1060-0x107f]
[ 0.220225] pci 0000:00:1d.7: [8086:268c] type 0 class 0x000c03
[ 0.220245] pci 0000:00:1d.7: reg 10: [mem 0xf5df0000-0xf5df03ff]
[ 0.220315] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.220320] pci 0000:00:1d.7: PME# disabled
[ 0.220338] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 0.220393] pci 0000:00:1f.0: [8086:2670] type 0 class 0x000601
[ 0.220478] pci 0000:00:1f.1: [8086:269e] type 0 class 0x000101
[ 0.220491] pci 0000:00:1f.1: reg 10: [io 0x01f0-0x01f7]
[ 0.220501] pci 0000:00:1f.1: reg 14: [io 0x03f4-0x03f7]
[ 0.220511] pci 0000:00:1f.1: reg 18: [io 0x0170-0x0177]
[ 0.220521] pci 0000:00:1f.1: reg 1c: [io 0x0374-0x0377]
[ 0.220531] pci 0000:00:1f.1: reg 20: [io 0x0500-0x050f]
[ 0.220865] pci 0000:04:00.0: [8086:3500] type 1 class 0x000604
[ 0.223155] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 0.223246] pci 0000:04:00.0: PME# disabled
[ 0.224016] pci 0000:04:00.3: [8086:350c] type 1 class 0x000604
[ 0.226028] pci 0000:04:00.3: PME# supported from D0 D3hot D3cold
[ 0.226119] pci 0000:04:00.3: PME# disabled
[ 0.226670] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe
device. You can enable it with 'pcie_aspm=force'
[ 0.228203] pci 0000:00:02.0: PCI bridge to [bus 04-0e]
[ 0.229272] pci 0000:00:02.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.229276] pci 0000:00:02.0: bridge window [mem 0xf9f00000-0xfbffffff]
[ 0.229282] pci 0000:00:02.0: bridge window [mem
0xfff00000-0x000fffff pref] (disabled)
[ 0.231026] pci 0000:05:00.0: [8086:3510] type 1 class 0x000604
[ 0.234258] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 0.234349] pci 0000:05:00.0: PME# disabled
[ 0.234899] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe
device. You can enable it with 'pcie_aspm=force'
[ 0.236292] pci 0000:05:01.0: [8086:3514] type 1 class 0x000604
[ 0.240060] pci 0000:05:01.0: PME# supported from D0 D3hot D3cold
[ 0.240151] pci 0000:05:01.0: PME# disabled
[ 0.240655] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe
device. You can enable it with 'pcie_aspm=force'
[ 0.244106] pci 0000:04:00.0: PCI bridge to [bus 05-0b]
[ 0.245291] pci 0000:04:00.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.245382] pci 0000:04:00.0: bridge window [mem 0xfa000000-0xfbffffff]
[ 0.245566] pci 0000:04:00.0: bridge window [mem
0xfff00000-0x000fffff pref] (disabled)
[ 0.247352] pci 0000:05:00.0: PCI bridge to [bus 06-08]
[ 0.248064] pci 0000:05:00.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.248155] pci 0000:05:00.0: bridge window [mem
0xfff00000-0x000fffff] (disabled)
[ 0.248339] pci 0000:05:00.0: bridge window [mem
0xfff00000-0x000fffff pref] (disabled)
[ 0.250446] pci 0000:09:00.0: [1166:0103] type 1 class 0x000604
[ 0.253023] pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
[ 0.253114] pci 0000:09:00.0: PME# disabled
[ 0.253801] pci 0000:09:00.0: disabling ASPM on pre-1.1 PCIe
device. You can enable it with 'pcie_aspm=force'
[ 0.255960] pci 0000:05:01.0: PCI bridge to [bus 09-0b]
[ 0.256064] pci 0000:05:01.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.256156] pci 0000:05:01.0: bridge window [mem 0xfa000000-0xfbffffff]
[ 0.256339] pci 0000:05:01.0: bridge window [mem
0xfff00000-0x000fffff pref] (disabled)
[ 0.258080] pci 0000:0a:00.0: [14e4:164c] type 0 class 0x000200
[ 0.258859] pci 0000:0a:00.0: reg 10: [mem 0xfa000000-0xfbffffff 64bit]
[ 0.261482] pci 0000:0a:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.262443] pci 0000:0a:00.0: PME# supported from D3hot D3cold
[ 0.262534] pci 0000:0a:00.0: PME# disabled
[ 0.264291] pci 0000:09:00.0: PCI bridge to [bus 0a-0a]
[ 0.265451] pci 0000:09:00.0: bridge window [io
0xfffff000-0x0000] (disabled)
[ 0.265542] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfbffffff]
[ 0.265726] pci 0000:09:00.0: bridge window [mem
0xfff00000-0x000fffff pref] (disabled)
[ 0.268795] pci 0000:04:00.3: PCI bridge to [bus 0c-0e]
[ 0.269447] pci 0000:04:00.3: bridge window [io 0xf000-0x0000] (disabled)
[ 0.269538] pci 0000:04:00.3: bridge window [mem
0xfff00000-0x000fffff] (disabled)
[ 0.269721] pci 0000:04:00.3: bridge window [mem
0xfff00000-0x000fffff pref] (disabled)
[ 0.270159] pci 0000:00:03.0: PCI bridge to [bus 17-19]
[ 0.271225] pci 0000:00:03.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.271229] pci 0000:00:03.0: bridge window [mem
0xfff00000-0x000fffff] (disabled)
[ 0.271234] pci 0000:00:03.0: bridge window [mem
0xfff00000-0x000fffff pref] (disabled)
[ 0.271262] pci 0000:00:04.0: PCI bridge to [bus 0f-11]
[ 0.272020] pci 0000:00:04.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.272024] pci 0000:00:04.0: bridge window [mem
0xfff00000-0x000fffff] (disabled)
[ 0.272029] pci 0000:00:04.0: bridge window [mem
0xfff00000-0x000fffff pref] (disabled)
[ 0.272066] pci 0000:12:00.0: [1166:0103] type 1 class 0x000604
[ 0.272115] pci 0000:12:00.0: PME# supported from D0 D3hot D3cold
[ 0.272119] pci 0000:12:00.0: PME# disabled
[ 0.272133] pci 0000:12:00.0: disabling ASPM on pre-1.1 PCIe
device. You can enable it with 'pcie_aspm=force'
[ 0.273900] pci 0000:00:05.0: PCI bridge to [bus 12-16]
[ 0.275071] pci 0000:00:05.0: bridge window [io 0x4000-0x4fff]
[ 0.275075] pci 0000:00:05.0: bridge window [mem 0xfdf00000-0xfdffffff]
[ 0.275080] pci 0000:00:05.0: bridge window [mem
0xfff00000-0x000fffff pref] (disabled)
[ 0.275121] pci 0000:13:04.0: [1166:0104] type 1 class 0x000604
[ 0.275188] pci 0000:13:08.0: [103c:3238] type 0 class 0x000104
[ 0.275212] pci 0000:13:08.0: reg 10: [mem 0xfdf80000-0xfdffffff 64bit]
[ 0.275221] pci 0000:13:08.0: reg 18: [io 0x4000-0x40ff]
[ 0.275231] pci 0000:13:08.0: reg 1c: [mem 0xfdf70000-0xfdf77fff]
[ 0.275255] pci 0000:13:08.0: reg 30: [mem 0x00000000-0x00003fff pref]
[ 0.275278] pci 0000:13:08.0: supports D1
[ 0.275314] pci 0000:12:00.0: PCI bridge to [bus 13-16]
[ 0.276023] pci 0000:12:00.0: bridge window [io 0x4000-0x4fff]
[ 0.276027] pci 0000:12:00.0: bridge window [mem 0xfdf00000-0xfdffffff]
[ 0.276034] pci 0000:12:00.0: bridge window [mem
0xfff00000-0x000fffff pref] (disabled)
[ 0.276096] pci 0000:13:04.0: PCI bridge to [bus 14-16]
[ 0.277169] pci 0000:13:04.0: bridge window [io
0xfffff000-0x0000] (disabled)
[ 0.277174] pci 0000:13:04.0: bridge window [mem
0xfff00000-0x000fffff] (disabled)
[ 0.277181] pci 0000:13:04.0: bridge window [mem
0xfff00000-0x000fffff pref] (disabled)
[ 0.277242] pci 0000:02:00.0: [1166:0103] type 1 class 0x000604
[ 0.277307] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.277312] pci 0000:02:00.0: PME# disabled
[ 0.277332] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe
device. You can enable it with 'pcie_aspm=force'
[ 0.280026] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[ 0.281062] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.281066] pci 0000:00:1c.0: bridge window [mem 0xf6000000-0xf7ffffff]
[ 0.281073] pci 0000:00:1c.0: bridge window [mem
0xfff00000-0x000fffff pref] (disabled)
[ 0.281130] pci 0000:03:00.0: [14e4:164c] type 0 class 0x000200
[ 0.281156] pci 0000:03:00.0: reg 10: [mem 0xf6000000-0xf7ffffff 64bit]
[ 0.281208] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x000007ff pref]
[ 0.281240] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.281245] pci 0000:03:00.0: PME# disabled
[ 0.281302] pci 0000:02:00.0: PCI bridge to [bus 03-03]
[ 0.282366] pci 0000:02:00.0: bridge window [io
0xfffff000-0x0000] (disabled)
[ 0.282372] pci 0000:02:00.0: bridge window [mem 0xf6000000-0xf7ffffff]
[ 0.282380] pci 0000:02:00.0: bridge window [mem
0xfff00000-0x000fffff pref] (disabled)
[ 0.282426] pci 0000:01:03.0: [1002:515e] type 0 class 0x000300
[ 0.282444] pci 0000:01:03.0: reg 10: [mem 0xd8000000-0xdfffffff pref]
[ 0.282456] pci 0000:01:03.0: reg 14: [io 0x3000-0x30ff]
[ 0.282467] pci 0000:01:03.0: reg 18: [mem 0xf5ff0000-0xf5ffffff]
[ 0.282503] pci 0000:01:03.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.282524] pci 0000:01:03.0: supports D1 D2
[ 0.282543] pci 0000:01:04.0: [0e11:b203] type 0 class 0x000880
[ 0.282562] pci 0000:01:04.0: reg 10: [io 0x2800-0x28ff]
[ 0.282573] pci 0000:01:04.0: reg 14: [mem 0xf5fe0000-0xf5fe01ff]
[ 0.282635] pci 0000:01:04.0: PME# supported from D0 D3hot D3cold
[ 0.282640] pci 0000:01:04.0: PME# disabled
[ 0.282661] pci 0000:01:04.2: [0e11:b204] type 0 class 0x000880
[ 0.282682] pci 0000:01:04.2: reg 10: [io 0x3400-0x34ff]
[ 0.282695] pci 0000:01:04.2: reg 14: [mem 0xf5fd0000-0xf5fd07ff]
[ 0.282707] pci 0000:01:04.2: reg 18: [mem 0xf5fc0000-0xf5fc1fff]
[ 0.282719] pci 0000:01:04.2: reg 1c: [mem 0xf5f00000-0xf5f7ffff]
[ 0.282750] pci 0000:01:04.2: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.282773] pci 0000:01:04.2: PME# supported from D0 D3hot D3cold
[ 0.282778] pci 0000:01:04.2: PME# disabled
[ 0.282799] pci 0000:01:04.4: [103c:3300] type 0 class 0x000c03
[ 0.282857] pci 0000:01:04.4: reg 20: [io 0x3800-0x381f]
[ 0.282899] pci 0000:01:04.4: PME# supported from D0 D3hot D3cold
[ 0.282904] pci 0000:01:04.4: PME# disabled
[ 0.282925] pci 0000:01:04.6: [103c:3302] type 0 class 0x000c07
[ 0.282944] pci 0000:01:04.6: reg 10: [mem 0xf5ef0000-0xf5ef00ff]
[ 0.283014] pci 0000:01:04.6: PME# supported from D0 D3hot D3cold
[ 0.283019] pci 0000:01:04.6: PME# disabled
[ 0.283067] pci 0000:00:1e.0: PCI bridge to [bus 01-01] (subtractive decode)
[ 0.284021] pci 0000:00:1e.0: bridge window [io 0x2000-0x3fff]
[ 0.284026] pci 0000:00:1e.0: bridge window [mem 0xf5e00000-0xf5ffffff]
[ 0.284033] pci 0000:00:1e.0: bridge window [mem
0xd8000000-0xdfffffff 64bit pref]
[ 0.284036] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff]
(subtractive decode)
[ 0.284039] pci 0000:00:1e.0: bridge window [mem
0x00000000-0xfffffffff] (subtractive decode)
[ 0.284061] pci_bus 0000:00: on NUMA node 0
[ 0.284065] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.284136] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT]
[ 0.284182] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPTA._PRT]
[ 0.284208] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02._PRT]
[ 0.284222] ACPI Warning: For \_SB_.PCI0.PT02._PRT: Return Package
has no elements (empty) (20110316/nspredef-456)
[ 0.286028] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02.PEX2._PRT]
[ 0.286105] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02.IPE4._PRT]
[ 0.286142] ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0.PT02.IPE4.IPE1._PRT]
[ 0.286194] ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0.PT02.IPE4.IPE2._PRT]
[ 0.286240] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT04._PRT]
[ 0.286290] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT05.EEPB._PRT]
[ 0.286319] ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0.PT05.EEPB.EPPB._PRT]
[ 0.286367] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.288020] Unable to assume _OSC PCIe control. Disabling ASPM
[ 0.292304] ACPI: PCI Interrupt Link [LNKA] (IRQs *5 7 10 11)
[ 0.293658] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *7 10 11)
[ 0.295048] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 *10 11)
[ 0.296377] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11)
[ 0.297709] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 7 10 11) *0, disabled.
[ 0.299335] ACPI: PCI Interrupt Link [LNKF] (IRQs *5 7 10 11)
[ 0.300612] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 *10 11)
[ 0.302066] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 *7 10 11)
[ 0.303541] vgaarb: device added:
PCI:0000:01:03.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.304023] vgaarb: loaded
[ 0.304678] PCI: Using ACPI for IRQ routing
[ 0.313021] PCI: pci_cache_line_size set to 64 bytes
[ 0.313643] reserve RAM buffer: 000000000009f400 - 000000000009ffff
[ 0.313646] reserve RAM buffer: 000000003fe58000 - 000000003fffffff
[ 0.313773] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.315219] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.316361] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.320045] Switching to clocksource hpet
[ 0.322391] pnp: PnP ACPI init
[ 0.323126] ACPI: bus type pnp registered
[ 0.323126] Switched to NOHz mode on CPU #0
[ 0.323129] Switched to NOHz mode on CPU #1
[ 0.324858] pnp 00:00: [bus 00-7f]
[ 0.324862] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.324865] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.324868] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.324870] pnp 00:00: [mem 0x40000000-0xdfffffff window]
[ 0.324873] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[ 0.324913] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.324996] pnp 00:01: [io 0x0070-0x0077]
[ 0.324999] pnp 00:01: [io 0x0408-0x040f]
[ 0.325001] pnp 00:01: [io 0x04d0-0x04d1]
[ 0.325004] pnp 00:01: [io 0x0020-0x003f]
[ 0.325006] pnp 00:01: [io 0x00a0-0x00bf]
[ 0.325008] pnp 00:01: [io 0x0090-0x009f]
[ 0.325010] pnp 00:01: [io 0x0050-0x0053]
[ 0.325012] pnp 00:01: [io 0x0700-0x071f]
[ 0.325015] pnp 00:01: [io 0x0800-0x083f]
[ 0.325017] pnp 00:01: [io 0x0900-0x097f]
[ 0.325019] pnp 00:01: [io 0x0010-0x001f]
[ 0.325021] pnp 00:01: [io 0x0c80-0x0c83]
[ 0.325023] pnp 00:01: [io 0x0cd4-0x0cd7]
[ 0.325026] pnp 00:01: [io 0x0f50-0x0f58]
[ 0.325028] pnp 00:01: [io 0x00f0]
[ 0.325030] pnp 00:01: [io 0x0ca0-0x0ca1]
[ 0.325032] pnp 00:01: [io 0x0ca4-0x0ca5]
[ 0.325034] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 0.325037] pnp 00:01: [mem 0xfe000000-0xfebfffff]
[ 0.325039] pnp 00:01: [io 0x02f8-0x02ff]
[ 0.325121] system 00:01: [io 0x0408-0x040f] has been reserved
[ 0.326437] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.327712] system 00:01: [io 0x0700-0x071f] has been reserved
[ 0.328948] system 00:01: [io 0x0800-0x083f] has been reserved
[ 0.330168] system 00:01: [io 0x0900-0x097f] has been reserved
[ 0.331337] system 00:01: [io 0x0c80-0x0c83] has been reserved
[ 0.332606] system 00:01: [io 0x0cd4-0x0cd7] has been reserved
[ 0.333847] system 00:01: [io 0x0f50-0x0f58] has been reserved
[ 0.335058] system 00:01: [io 0x0ca0-0x0ca1] has been reserved
[ 0.336319] system 00:01: [io 0x0ca4-0x0ca5] has been reserved
[ 0.337327] system 00:01: [io 0x02f8-0x02ff] has been reserved
[ 0.338574] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.339943] system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved
[ 0.341356] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.341367] pnp 00:02: [io 0x0ca2-0x0ca3]
[ 0.341399] pnp 00:02: Plug and Play ACPI device, IDs IPI0001 (active)
[ 0.341422] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.341455] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.341467] pnp 00:04: [dma 7]
[ 0.341469] pnp 00:04: [io 0x0000-0x000f]
[ 0.341472] pnp 00:04: [io 0x0080-0x008f]
[ 0.341474] pnp 00:04: [io 0x00c0-0x00df]
[ 0.341511] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.341520] pnp 00:05: [io 0x0061]
[ 0.341551] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.341561] pnp 00:06: [io 0x0060]
[ 0.341563] pnp 00:06: [io 0x0064]
[ 0.341572] pnp 00:06: [irq 1]
[ 0.341603] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.341616] pnp 00:07: [irq 12]
[ 0.341650] pnp 00:07: Plug and Play ACPI device, IDs PNP0f13
PNP0f0e (active)
[ 0.341660] pnp 00:08: [io 0x002e-0x002f]
[ 0.341663] pnp 00:08: [io 0x004e-0x004f]
[ 0.341665] pnp 00:08: [io 0x0620-0x065f]
[ 0.341667] pnp 00:08: [io 0x0680-0x069f]
[ 0.341669] pnp 00:08: [io 0x0600-0x061f]
[ 0.341672] pnp 00:08: [io 0x0660-0x067f]
[ 0.341674] pnp 00:08: [io 0x0300-0x030f]
[ 0.341707] pnp 00:08: Plug and Play ACPI device, IDs PNP0a06 (active)
[ 0.341825] pnp 00:09: [irq 4]
[ 0.341828] pnp 00:09: [io 0x03f8-0x03ff]
[ 0.341940] pnp 00:09: Plug and Play ACPI device, IDs PNP0501
PNP0500 (active)
[ 0.342021] pnp 00:0a: Plug and Play ACPI device, IDs PNP0700 (disabled)
[ 0.342247] pnp: PnP ACPI: found 11 devices
[ 0.343148] ACPI: ACPI bus type pnp unregistered
[ 0.343980] PnPBIOS: Disabled by ACPI PNP
[ 0.382447] pci 0000:00:02.0: BAR 15: assigned [mem
0x40000000-0x400fffff pref]
[ 0.384022] pci 0000:00:05.0: BAR 15: assigned [mem
0x40100000-0x401fffff pref]
[ 0.385534] pci 0000:00:1c.0: BAR 15: assigned [mem
0x40200000-0x402fffff pref]
[ 0.387034] pci 0000:04:00.0: BAR 15: assigned [mem
0x40000000-0x400fffff pref]
[ 0.388404] pci 0000:05:01.0: BAR 15: assigned [mem
0x40000000-0x400fffff pref]
[ 0.389848] pci 0000:05:00.0: PCI bridge to [bus 06-08]
[ 0.390900] pci 0000:05:00.0: bridge window [io disabled]
[ 0.392132] pci 0000:05:00.0: bridge window [mem disabled]
[ 0.393335] pci 0000:05:00.0: bridge window [mem pref disabled]
[ 0.394774] pci 0000:09:00.0: BAR 15: assigned [mem
0x40000000-0x400fffff pref]
[ 0.396319] pci 0000:0a:00.0: BAR 6: assigned [mem
0x40000000-0x4000ffff pref]
[ 0.397763] pci 0000:09:00.0: PCI bridge to [bus 0a-0a]
[ 0.398899] pci 0000:09:00.0: bridge window [io disabled]
[ 0.400253] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfbffffff]
[ 0.401758] pci 0000:09:00.0: bridge window [mem
0x40000000-0x400fffff pref]
[ 0.403443] pci 0000:05:01.0: PCI bridge to [bus 09-0b]
[ 0.404538] pci 0000:05:01.0: bridge window [io disabled]
[ 0.405670] pci 0000:05:01.0: bridge window [mem 0xfa000000-0xfbffffff]
[ 0.406036] pci 0000:05:01.0: bridge window [mem
0x40000000-0x400fffff pref]
[ 0.407484] pci 0000:04:00.0: PCI bridge to [bus 05-0b]
[ 0.408655] pci 0000:04:00.0: bridge window [io disabled]
[ 0.409965] pci 0000:04:00.0: bridge window [mem 0xfa000000-0xfbffffff]
[ 0.411418] pci 0000:04:00.0: bridge window [mem
0x40000000-0x400fffff pref]
[ 0.413017] pci 0000:04:00.3: PCI bridge to [bus 0c-0e]
[ 0.414051] pci 0000:04:00.3: bridge window [io disabled]
[ 0.415261] pci 0000:04:00.3: bridge window [mem disabled]
[ 0.416551] pci 0000:04:00.3: bridge window [mem pref disabled]
[ 0.417973] pci 0000:00:02.0: PCI bridge to [bus 04-0e]
[ 0.419028] pci 0000:00:02.0: bridge window [io disabled]
[ 0.420206] pci 0000:00:02.0: bridge window [mem 0xf9f00000-0xfbffffff]
[ 0.421574] pci 0000:00:02.0: bridge window [mem
0x40000000-0x400fffff pref]
[ 0.422917] pci 0000:00:03.0: PCI bridge to [bus 17-19]
[ 0.423661] pci 0000:00:03.0: bridge window [io disabled]
[ 0.424603] pci 0000:00:03.0: bridge window [mem disabled]
[ 0.425822] pci 0000:00:03.0: bridge window [mem pref disabled]
[ 0.427044] pci 0000:00:04.0: PCI bridge to [bus 0f-11]
[ 0.428208] pci 0000:00:04.0: bridge window [io disabled]
[ 0.429425] pci 0000:00:04.0: bridge window [mem disabled]
[ 0.430551] pci 0000:00:04.0: bridge window [mem pref disabled]
[ 0.431805] pci 0000:12:00.0: BAR 15: assigned [mem
0x40100000-0x401fffff pref]
[ 0.433221] pci 0000:13:08.0: BAR 6: assigned [mem
0x40100000-0x40103fff pref]
[ 0.434775] pci 0000:13:04.0: PCI bridge to [bus 14-16]
[ 0.435910] pci 0000:13:04.0: bridge window [io disabled]
[ 0.437059] pci 0000:13:04.0: bridge window [mem disabled]
[ 0.438296] pci 0000:13:04.0: bridge window [mem pref disabled]
[ 0.439533] pci 0000:12:00.0: PCI bridge to [bus 13-16]
[ 0.440494] pci 0000:12:00.0: bridge window [io 0x4000-0x4fff]
[ 0.441914] pci 0000:12:00.0: bridge window [mem 0xfdf00000-0xfdffffff]
[ 0.443268] pci 0000:12:00.0: bridge window [mem
0x40100000-0x401fffff pref]
[ 0.444740] pci 0000:00:05.0: PCI bridge to [bus 12-16]
[ 0.445961] pci 0000:00:05.0: bridge window [io 0x4000-0x4fff]
[ 0.447164] pci 0000:00:05.0: bridge window [mem 0xfdf00000-0xfdffffff]
[ 0.448728] pci 0000:00:05.0: bridge window [mem
0x40100000-0x401fffff pref]
[ 0.450074] pci 0000:02:00.0: BAR 15: assigned [mem
0x40200000-0x402fffff pref]
[ 0.451606] pci 0000:03:00.0: BAR 6: assigned [mem
0x40200000-0x402007ff pref]
[ 0.453163] pci 0000:02:00.0: PCI bridge to [bus 03-03]
[ 0.454210] pci 0000:02:00.0: bridge window [io disabled]
[ 0.455358] pci 0000:02:00.0: bridge window [mem 0xf6000000-0xf7ffffff]
[ 0.456758] pci 0000:02:00.0: bridge window [mem
0x40200000-0x402fffff pref]
[ 0.458059] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[ 0.459180] pci 0000:00:1c.0: bridge window [io disabled]
[ 0.460264] pci 0000:00:1c.0: bridge window [mem 0xf6000000-0xf7ffffff]
[ 0.461706] pci 0000:00:1c.0: bridge window [mem
0x40200000-0x402fffff pref]
[ 0.463358] pci 0000:01:03.0: BAR 6: assigned [mem
0xf5e00000-0xf5e1ffff pref]
[ 0.464795] pci 0000:01:04.2: BAR 6: assigned [mem
0xf5e20000-0xf5e2ffff pref]
[ 0.466328] pci 0000:00:1e.0: PCI bridge to [bus 01-01]
[ 0.467340] pci 0000:00:1e.0: bridge window [io 0x2000-0x3fff]
[ 0.468559] pci 0000:00:1e.0: bridge window [mem 0xf5e00000-0xf5ffffff]
[ 0.469983] pci 0000:00:1e.0: bridge window [mem
0xd8000000-0xdfffffff 64bit pref]
[ 0.471562] pci 0000:00:02.0: setting latency timer to 64
[ 0.471704] pci 0000:04:00.0: setting latency timer to 64
[ 0.471846] pci 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.473308] pci 0000:05:00.0: setting latency timer to 64
[ 0.473448] pci 0000:05:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.474902] pci 0000:05:01.0: setting latency timer to 64
[ 0.475131] pci 0000:09:00.0: setting latency timer to 64
[ 0.475360] pci 0000:04:00.3: setting latency timer to 64
[ 0.475408] pci 0000:00:03.0: setting latency timer to 64
[ 0.475414] pci 0000:00:04.0: setting latency timer to 64
[ 0.475420] pci 0000:00:05.0: setting latency timer to 64
[ 0.475428] pci 0000:12:00.0: setting latency timer to 64
[ 0.475438] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.476766] pci 0000:00:1c.0: setting latency timer to 64
[ 0.476774] pci 0000:02:00.0: setting latency timer to 64
[ 0.476781] pci 0000:00:1e.0: setting latency timer to 64
[ 0.476785] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.476788] pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff]
[ 0.476791] pci_bus 0000:04: resource 1 [mem 0xf9f00000-0xfbffffff]
[ 0.476794] pci_bus 0000:04: resource 2 [mem 0x40000000-0x400fffff pref]
[ 0.476796] pci_bus 0000:05: resource 1 [mem 0xfa000000-0xfbffffff]
[ 0.476799] pci_bus 0000:05: resource 2 [mem 0x40000000-0x400fffff pref]
[ 0.476802] pci_bus 0000:09: resource 1 [mem 0xfa000000-0xfbffffff]
[ 0.476804] pci_bus 0000:09: resource 2 [mem 0x40000000-0x400fffff pref]
[ 0.476807] pci_bus 0000:0a: resource 1 [mem 0xfa000000-0xfbffffff]
[ 0.476810] pci_bus 0000:0a: resource 2 [mem 0x40000000-0x400fffff pref]
[ 0.476812] pci_bus 0000:12: resource 0 [io 0x4000-0x4fff]
[ 0.476815] pci_bus 0000:12: resource 1 [mem 0xfdf00000-0xfdffffff]
[ 0.476818] pci_bus 0000:12: resource 2 [mem 0x40100000-0x401fffff pref]
[ 0.476820] pci_bus 0000:13: resource 0 [io 0x4000-0x4fff]
[ 0.476823] pci_bus 0000:13: resource 1 [mem 0xfdf00000-0xfdffffff]
[ 0.476825] pci_bus 0000:13: resource 2 [mem 0x40100000-0x401fffff pref]
[ 0.476828] pci_bus 0000:02: resource 1 [mem 0xf6000000-0xf7ffffff]
[ 0.476831] pci_bus 0000:02: resource 2 [mem 0x40200000-0x402fffff pref]
[ 0.476833] pci_bus 0000:03: resource 1 [mem 0xf6000000-0xf7ffffff]
[ 0.476836] pci_bus 0000:03: resource 2 [mem 0x40200000-0x402fffff pref]
[ 0.476839] pci_bus 0000:01: resource 0 [io 0x2000-0x3fff]
[ 0.476841] pci_bus 0000:01: resource 1 [mem 0xf5e00000-0xf5ffffff]
[ 0.476844] pci_bus 0000:01: resource 2 [mem 0xd8000000-0xdfffffff
64bit pref]
[ 0.476847] pci_bus 0000:01: resource 4 [io 0x0000-0xffff]
[ 0.476849] pci_bus 0000:01: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.476902] NET: Registered protocol family 2
[ 0.478001] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.479759] TCP established hash table entries: 131072 (order: 8,
1048576 bytes)
[ 0.481860] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.483494] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.484841] TCP reno registered
[ 0.485557] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.486764] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.488392] NET: Registered protocol family 1
[ 0.504025] pci 0000:00:1f.0: rerouting interrupts for [8086:2670]
[ 0.505521] pci 0000:01:03.0: Boot video device
[ 0.506352] PCI: CLS 64 bytes, default 64
[ 0.506395] Unpacking initramfs...
[ 0.731628] Freeing initrd memory: 7696k freed
[ 0.735908] platform rtc_cmos: registered platform RTC device (no
PNP device found)
[ 0.742769] audit: initializing netlink socket (disabled)
[ 0.743366] type=2000 audit(1317795604.740:1): initialized
[ 0.761352] highmem bounce pool size: 64 pages
[ 0.761997] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.763809] VFS: Disk quotas dquot_6.5.2
[ 0.764288] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.765329] msgmni has been set to 1750
[ 0.765732] alg: No test for stdrng (krng)
[ 0.766046] Block layer SCSI generic (bsg) driver version 0.4
loaded (major 253)
[ 0.767475] io scheduler noop registered
[ 0.767650] io scheduler deadline registered
[ 0.768544] io scheduler cfq registered (default)
[ 0.769117] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.769158] pcieport 0000:00:1c.0: irq 64 for MSI/MSI-X
[ 0.773389] ERST: Table is not found!
[ 0.773885] isapnp: Scanning for PnP cards...
[ 1.128317] isapnp: No Plug & Play device found
[ 1.128824] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.149815] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.170930] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.192654] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.193265] Linux agpgart interface v0.103
[ 1.194058] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M]
at 0x60,0x64 irq 1,12
[ 1.196218] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.196512] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.197168] mousedev: PS/2 mouse device common for all mice
[ 1.197890] rtc_cmos rtc_cmos: RTC can wake from S4
[ 1.198384] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 1.198791] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 1.199561] cpuidle: using governor ladder
[ 1.200052] cpuidle: using governor menu
[ 1.200456] TCP cubic registered
[ 1.200800] NET: Registered protocol family 10
[ 1.201886] Mobile IPv6
[ 1.202153] NET: Registered protocol family 17
[ 1.202760] Registering the dns_resolver key type
[ 1.203198] Using IPI No-Shortcut mode
[ 1.203498] PM: Hibernation image not present or could not be loaded.
[ 1.203507] registered taskstats version 1
[ 1.207545] rtc_cmos rtc_cmos: setting system clock to 2011-10-05
06:20:06 UTC (1317795606)
[ 1.208453] Initializing network drop monitor service
[ 1.209369] Freeing unused kernel memory: 440k freed
[ 1.210554] Write protecting the kernel text: 2788k
[ 1.211179] Write protecting the kernel read-only data: 1036k
[ 1.211671] NX-protecting the kernel data: 3356k
[ 1.239298] Uniform Multi-Platform E-IDE driver
[ 1.242771] ide-gd driver 1.18
[ 1.276035] SCSI subsystem initialized
[ 1.296595] Fusion MPT base driver 3.04.18
[ 1.296881] Copyright (c) 1999-2008 LSI Corporation
[ 1.321002] udevd (74): /proc/74/oom_adj is deprecated, please use
/proc/74/oom_score_adj instead.
[ 1.322532] udevd version 125 started
[ 1.419002] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.419645] ACPI: Thermal Zone [THM0] (8 C)
[ 1.504820] bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver
bnx2 v2.1.6 (Mar 7, 2011)
[ 1.505532] bnx2 0000:0a:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.549828] usbcore: registered new interface driver usbfs
[ 1.550162] usbcore: registered new interface driver hub
[ 1.551644] usbcore: registered new device driver usb
[ 1.555065] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.555918] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.556928] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.556933] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.557677] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned
bus number 1
[ 1.560226] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.568112] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.572537] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 1.572558] ehci_hcd 0000:00:1d.7: irq 16, io mem 0xf5df0000
[ 1.588027] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.588846] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.589656] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.590338] usb usb1: Product: EHCI Host Controller
[ 1.590889] usb usb1: Manufacturer: Linux 2.6.39-bpo.2-686-pae ehci_hcd
[ 1.591575] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.592024] hub 1-0:1.0: USB hub found
[ 1.592771] hub 1-0:1.0: 8 ports detected
[ 1.593171] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.593460] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.593463] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.594034] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 2
[ 1.603540] bnx2 0000:0a:00.0: eth0: Broadcom NetXtreme II BCM5708
1000Base-T (B2) PCI-X 64-bit 133MHz found at mem fa000000, IRQ 17,
node addr 00:1b:78:95:0c:76
[ 1.605598] bnx2 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.612049] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001000
[ 1.612357] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.612803] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.613541] usb usb2: Product: UHCI Host Controller
[ 1.614614] usb usb2: Manufacturer: Linux 2.6.39-bpo.2-686-pae uhci_hcd
[ 1.615816] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.616768] hub 2-0:1.0: USB hub found
[ 1.617113] hub 2-0:1.0: 2 ports detected
[ 1.617520] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.617762] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.617765] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.618523] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus number 3
[ 1.640050] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001020
[ 1.640422] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.641653] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.642644] usb usb3: Product: UHCI Host Controller
[ 1.643595] usb usb3: Manufacturer: Linux 2.6.39-bpo.2-686-pae uhci_hcd
[ 1.644677] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.645416] hub 3-0:1.0: USB hub found
[ 1.645742] hub 3-0:1.0: 2 ports detected
[ 1.646449] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.647163] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.647166] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.648098] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
bus number 4
[ 1.664037] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001040
[ 1.664667] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.665213] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.666030] usb usb4: Product: UHCI Host Controller
[ 1.666916] usb usb4: Manufacturer: Linux 2.6.39-bpo.2-686-pae uhci_hcd
[ 1.667970] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.668773] hub 4-0:1.0: USB hub found
[ 1.669594] hub 4-0:1.0: 2 ports detected
[ 1.670205] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.670486] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1.670489] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.670932] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned
bus number 5
[ 1.692061] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001060
[ 1.693107] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.693625] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.694533] usb usb5: Product: UHCI Host Controller
[ 1.694750] usb usb5: Manufacturer: Linux 2.6.39-bpo.2-686-pae uhci_hcd
[ 1.695434] usb usb5: SerialNumber: 0000:00:1d.3
[ 1.695929] hub 5-0:1.0: USB hub found
[ 1.696548] hub 5-0:1.0: 2 ports detected
[ 1.696934] uhci_hcd 0000:01:04.4: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 1.697761] uhci_hcd 0000:01:04.4: UHCI Host Controller
[ 1.698336] uhci_hcd 0000:01:04.4: new USB bus registered, assigned
bus number 6
[ 1.708018] uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports
[ 1.710080] uhci_hcd 0000:01:04.4: irq 22, io base 0x00003800
[ 1.711305] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.711657] usb usb6: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.712206] usb usb6: Product: UHCI Host Controller
[ 1.712421] usb usb6: Manufacturer: Linux 2.6.39-bpo.2-686-pae uhci_hcd
[ 1.712888] usb usb6: SerialNumber: 0000:01:04.4
[ 1.713265] hub 6-0:1.0: USB hub found
[ 1.713600] hub 6-0:1.0: 2 ports detected
[ 1.732027] Refined TSC clocksource calibration: 2000.070 MHz.
[ 1.732674] Switching to clocksource tsc
[ 2.094908] bnx2 0000:03:00.0: eth1: Broadcom NetXtreme II BCM5708
1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f6000000, IRQ 16,
node addr 00:1b:78:02:7e:d8
[ 2.112035] usb 4-1: new low speed USB device number 2 using uhci_hcd
[ 2.169522] bnx2 0000:0a:00.0: irq 65 for MSI/MSI-X
[ 2.268008] bnx2 0000:0a:00.0: eth0: using MSI
[ 2.269054] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2.280204] bnx2 0000:03:00.0: irq 66 for MSI/MSI-X
[ 2.284669] usb 4-1: New USB device found, idVendor=0488, idProduct=00df
[ 2.285952] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.286605] usb 4-1: Product: GlidePoint
[ 2.287054] usb 4-1: Manufacturer: Cirque
[ 2.345184] input: Cirque GlidePoint as
/devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input0
[ 2.346358] generic-usb 0003:0488:00DF.0001: input,hidraw0: USB HID
v1.10 Keyboard [Cirque GlidePoint] on usb-0000:00:1d.2-1/input0
[ 2.347484] usbcore: registered new interface driver usbhid
[ 2.348207] usbhid: USB HID core driver
[ 2.400009] bnx2 0000:03:00.0: eth1: using MSI
[ 2.400512] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 2.416028] usb 6-1: new full speed USB device number 2 using uhci_hcd
[ 2.562997] usb 6-1: New USB device found, idVendor=03f0, idProduct=1027
[ 2.563259] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.564230] usb 6-1: Product: Virtual Keyboard
[ 2.564500] usb 6-1: Manufacturer: HP
[ 2.596120] input: HP Virtual Keyboard as
/devices/pci0000:00/0000:00:1e.0/0000:01:04.4/usb6/6-1/6-1:1.0/input/input1
[ 2.597816] generic-usb 0003:03F0:1027.0002: input,hidraw1: USB HID
v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1/input0
[ 2.608461] input: HP Virtual Keyboard as
/devices/pci0000:00/0000:00:1e.0/0000:01:04.4/usb6/6-1/6-1:1.1/input/input2
[ 2.609794] generic-usb 0003:03F0:1027.0003: input,hidraw2: USB HID
v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1/input1
[ 2.720020] usb 6-2: new full speed USB device number 3 using uhci_hcd
[ 2.866928] usb 6-2: New USB device found, idVendor=03f0, idProduct=1327
[ 2.867431] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.867661] usb 6-2: Product: Virtual Hub
[ 2.868071] usb 6-2: Manufacturer: HP
[ 2.873494] hub 6-2:1.0: USB hub found
[ 2.876786] hub 6-2:1.0: 7 ports detected
[ 25.748068] bnx2 0000:03:00.0: irq 65 for MSI/MSI-X
[ 25.948008] bnx2 0000:03:00.0: eth0: using MSI
[ 25.948529] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 27.548915] bnx2 0000:03:00.0: eth0: NIC Copper Link is Up, 100
Mbps full duplex
[ 27.549728] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 35.613746] RPC: Registered udp transport module.
[ 35.614550] RPC: Registered tcp transport module.
[ 35.615481] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 35.625837] FS-Cache: Loaded
[ 35.645909] FS-Cache: Netfs 'nfs' registered for caching
[ 37.773622] bnx2 0000:0a:00.0: irq 66 for MSI/MSI-X
[ 37.889164] bnx2 0000:0a:00.0: eth1: using MSI
[ 37.889654] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 38.448006] eth0: no IPv6 routers present
[ 48.888268] md: raid1 personality registered for level 1
[ 48.908494] device-mapper: uevent: version 1.0.3
[ 48.908581] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02)
initialised: dm-devel@redhat.com
[ 57.558487] udevd version 125 started
[ 57.694244] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 57.694251] ACPI: Power Button [PWRF]
[ 57.697922] ACPI: acpi_idle registered with cpuidle
[ 57.742141] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 57.752284] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 57.755980] Floppy drive(s): fd0 is 1.44M
[ 57.775452] EDAC MC: Ver: 2.1.0 Aug 4 2011
[ 57.818788] Disabling lock debugging due to kernel taint
[ 57.823058] HP CISS Driver (v 4.6.28-14 )
[ 57.823122] cciss 0000:13:08.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 57.823177] cciss 0000:13:08.0: irq 67 for MSI/MSI-X
[ 57.825707] EDAC MC0: Giving out device to 'i5000_edac.c' 'I5000':
DEV 0000:00:10.0
[ 57.825731] EDAC PCI0: Giving out device to module 'i5000_edac'
controller 'EDAC PCI controller': DEV '0000:00:10.0' (POLLED)
[ 57.854693] hpilo 0000:01:04.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 57.860205] cciss 0000:13:08.0: cciss0: <0x3238> at PCI
0000:13:08.0 IRQ 67 using DAC
[ 57.861875] cciss/c0d0: p1 p2 p3
[ 57.863245] cciss/c0d1: p1 p2 p3
[ 57.882305] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 57.890805] ipmi message handler version 39.2
[ 57.916735] intel_rng: FWH not detected
[ 57.921976] IPMI System Interface driver.
[ 57.922004] ipmi_si 0000:01:04.6: probing via PCI
[ 57.922025] ipmi_si 0000:01:04.6: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 57.922031] ipmi_si 0000:01:04.6: [mem 0xf5ef0000-0xf5ef00ff]
regsize 1 spacing 1 irq 21
[ 57.922033] ipmi_si: Adding PCI-specified kcs state machine
[ 57.922057] ipmi_si: probing via ACPI
[ 57.922096] ipmi_si 00:02: [io 0x0ca2-0x0ca3] regsize 1 spacing 1 irq 0
[ 57.922098] ipmi_si: Adding ACPI-specified kcs state machine
[ 57.922115] ipmi_si: probing via SMBIOS
[ 57.922118] ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
[ 57.922120] ipmi_si: Adding SMBIOS-specified kcs state machine
duplicate interface
[ 57.922124] ipmi_si: probing via SPMI
[ 57.922127] ipmi_si: SPMI: io 0xca2 regsize 2 spacing 2 irq 0
[ 57.922129] ipmi_si: Adding SPMI-specified kcs state machine
duplicate interface
[ 57.922133] ipmi_si: Trying PCI-specified kcs state machine at mem
address 0xf5ef0000, slave address 0x0, irq 21
[ 57.924545] libata version 3.00 loaded.
[ 57.961516] ata_piix 0000:00:1f.1: version 2.13
[ 57.961529] ata_piix 0000:00:1f.1: can't derive routing for PCI INT A
[ 57.967772] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 57.970425] scsi0 : ata_piix
[ 57.989581] scsi1 : ata_piix
[ 57.989649] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x500 irq 14
[ 57.989653] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x508 irq 15
[ 58.076039] ipmi_si 0000:01:04.6: Using irq 21
[ 58.163103] ata1.00: ATAPI: HL-DT-ST RW/DVD GCC-4482B, 2.01, max UDMA/33
[ 58.190500] ipmi_si 0000:01:04.6: Found new BMC (man_id: 0x00000b,
prod_id: 0x0000, dev_id: 0x11)
[ 58.190512] ipmi_si 0000:01:04.6: IPMI kcs interface initialized
[ 58.192188] ata1.00: configured for UDMA/33
[ 58.192996] scsi 0:0:0:0: CD-ROM HL-DT-ST RW/DVD
GCC-4482B 2.01 PQ: 0 ANSI: 5
[ 58.195022] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 58.195666] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 58.195771] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 58.221546] Error: Driver 'pcspkr' is already registered, aborting...
[ 58.249142] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 58.356098] input: PS/2 Logitech Mouse as
/devices/platform/i8042/serio1/input/input5
[ 60.776019] floppy0: no floppy controllers found
[ 60.820258] Floppy drive(s): fd0 is 1.44M
[ 63.840013] floppy0: no floppy controllers found
[ 240.760011] INFO: task .hpacucli:2049 blocked for more than 120 seconds.
[ 240.760873] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs"
disables this message.
[ 240.761489] .hpacucli D 00000015 0 2049 2035 0x00000000
[ 240.761494] f595b240 00003082 b54c80e5 00000015 f6803ec0 f59b7040
00000015 c148d1c0
[ 240.763070] 00408d37 00000000 c148d1c0 f595b240 c148d1c0 c148d1c0
c103bb9e c101bc43
[ 240.764112] 00000000 f5a62008 c12b2b89 00000000 f68071c0 f5a62000
f5a62008 f5a62000
[ 240.764117] Call Trace:
[ 240.764126] [<c103bb9e>] ? irq_exit+0x56/0x79
[ 240.764131] [<c101bc43>] ? smp_apic_timer_interrupt+0x6b/0x75
[ 240.764135] [<c12b2b89>] ? apic_timer_interrupt+0x31/0x38
[ 240.764143] [<c1028b55>] ? mutex_spin_on_owner+0x5d/0x64
[ 240.764148] [<c12b1675>] ? __mutex_lock_common+0xe9/0x13a
[ 240.764152] [<c12b16d5>] ? __mutex_lock_slowpath+0xf/0x11
[ 240.764155] [<c12b1766>] ? mutex_lock+0x17/0x24
[ 240.764157] [<c12b1766>] ? mutex_lock+0x17/0x24
[ 240.764164] [<f84c14b7>] ? cciss_unlocked_open+0x15/0x8a [cciss]
[ 240.764168] [<c10ed886>] ? __blkdev_get+0xb5/0x2f3
[ 240.764171] [<c10edc50>] ? blkdev_get+0x18c/0x270
[ 240.764175] [<c10dd034>] ? iget5_locked+0xbf/0xf7
[ 240.764178] [<c10ec7d0>] ? I_BDEV+0x4/0x4
[ 240.764180] [<c10dbe6b>] ? unlock_new_inode+0x31/0x36
[ 240.764183] [<c10ed1fa>] ? bdget+0xd9/0xdf
[ 240.764188] [<c114bcaf>] ? register_disk+0xb5/0x118
[ 240.764191] [<c114b2c1>] ? blk_register_region+0x1b/0x1f
[ 240.764194] [<c114bdd1>] ? add_disk+0xbf/0x1d6
[ 240.764197] [<c114a9b1>] ? disk_map_sector_rcu+0x95/0x95
[ 240.764200] [<c114b107>] ? get_disk+0x6a/0x6a
[ 240.764204] [<f84c1455>] ? cciss_add_disk+0xf7/0x111 [cciss]
[ 240.764209] [<f84c414b>] ? rebuild_lun_table+0x717/0x862 [cciss]
[ 240.764213] [<f84c4635>] ? do_ioctl+0x39f/0x7d6 [cciss]
[ 240.764217] [<c1025950>] ? ptep_set_access_flags+0x44/0x4b
[ 240.764221] [<c10273c3>] ? __kunmap_atomic+0x57/0x6c
[ 240.764225] [<c10adc89>] ? do_wp_page+0x33e/0x6f0
[ 240.764230] [<f84c4296>] ? rebuild_lun_table+0x862/0x862 [cciss]
[ 240.764234] [<c114a011>] ? __blkdev_driver_ioctl+0x1d/0x25
[ 240.764237] [<c114a8bd>] ? blkdev_ioctl+0x64d/0x684
[ 240.764240] [<c10ec939>] ? block_ioctl+0x2a/0x2f
[ 240.764242] [<c10ec939>] ? block_ioctl+0x2a/0x2f
[ 240.764245] [<c10ec90f>] ? nr_blockdev_pages+0x3c/0x3c
[ 240.764249] [<c10d779b>] ? do_vfs_ioctl+0x473/0x4be
[ 240.764252] [<c12b5013>] ? do_page_fault+0x345/0x361
[ 240.764255] [<c12b5000>] ? do_page_fault+0x332/0x361
[ 240.764258] [<c10b0cb0>] ? remove_vma+0x43/0x48
[ 240.764260] [<c10b19cf>] ? do_munmap+0x20c/0x226
[ 240.764263] [<c10d782a>] ? sys_ioctl+0x44/0x64
[ 240.764267] [<c12b769f>] ? sysenter_do_call+0x12/0x28
[ 360.764009] INFO: task .hpacucli:2049 blocked for more than 120 seconds.
[ 360.764935] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs"
disables this message.
[ 360.765510] .hpacucli D 00000015 0 2049 2035 0x00000000
[ 360.765514] f595b240 00003082 b54c80e5 00000015 f6803ec0 f59b7040
00000015 c148d1c0
[ 360.767026] 00408d37 00000000 c148d1c0 f595b240 c148d1c0 c148d1c0
c103bb9e c101bc43
[ 360.768263] 00000000 f5a62008 c12b2b89 00000000 f68071c0 f5a62000
f5a62008 f5a62000
[ 360.768268] Call Trace:
[ 360.768273] [<c103bb9e>] ? irq_exit+0x56/0x79
[ 360.768277] [<c101bc43>] ? smp_apic_timer_interrupt+0x6b/0x75
[ 360.768280] [<c12b2b89>] ? apic_timer_interrupt+0x31/0x38
[ 360.768285] [<c1028b55>] ? mutex_spin_on_owner+0x5d/0x64
[ 360.768289] [<c12b1675>] ? __mutex_lock_common+0xe9/0x13a
[ 360.768294] [<c12b16d5>] ? __mutex_lock_slowpath+0xf/0x11
[ 360.768297] [<c12b1766>] ? mutex_lock+0x17/0x24
[ 360.768299] [<c12b1766>] ? mutex_lock+0x17/0x24
[ 360.768304] [<f84c14b7>] ? cciss_unlocked_open+0x15/0x8a [cciss]
[ 360.768307] [<c10ed886>] ? __blkdev_get+0xb5/0x2f3
[ 360.768310] [<c10edc50>] ? blkdev_get+0x18c/0x270
[ 360.768313] [<c10dd034>] ? iget5_locked+0xbf/0xf7
[ 360.768316] [<c10ec7d0>] ? I_BDEV+0x4/0x4
[ 360.768318] [<c10dbe6b>] ? unlock_new_inode+0x31/0x36
[ 360.768321] [<c10ed1fa>] ? bdget+0xd9/0xdf
[ 360.768324] [<c114bcaf>] ? register_disk+0xb5/0x118
[ 360.768328] [<c114b2c1>] ? blk_register_region+0x1b/0x1f
[ 360.768331] [<c114bdd1>] ? add_disk+0xbf/0x1d6
[ 360.768334] [<c114a9b1>] ? disk_map_sector_rcu+0x95/0x95
[ 360.768337] [<c114b107>] ? get_disk+0x6a/0x6a
[ 360.768341] [<f84c1455>] ? cciss_add_disk+0xf7/0x111 [cciss]
[ 360.768345] [<f84c414b>] ? rebuild_lun_table+0x717/0x862 [cciss]
[ 360.768350] [<f84c4635>] ? do_ioctl+0x39f/0x7d6 [cciss]
[ 360.768353] [<c1025950>] ? ptep_set_access_flags+0x44/0x4b
[ 360.768356] [<c10273c3>] ? __kunmap_atomic+0x57/0x6c
[ 360.768359] [<c10adc89>] ? do_wp_page+0x33e/0x6f0
[ 360.768364] [<f84c4296>] ? rebuild_lun_table+0x862/0x862 [cciss]
[ 360.768368] [<c114a011>] ? __blkdev_driver_ioctl+0x1d/0x25
[ 360.768371] [<c114a8bd>] ? blkdev_ioctl+0x64d/0x684
[ 360.768374] [<c10ec939>] ? block_ioctl+0x2a/0x2f
[ 360.768377] [<c10ec939>] ? block_ioctl+0x2a/0x2f
[ 360.768379] [<c10ec90f>] ? nr_blockdev_pages+0x3c/0x3c
[ 360.768382] [<c10d779b>] ? do_vfs_ioctl+0x473/0x4be
[ 360.768385] [<c12b5013>] ? do_page_fault+0x345/0x361
[ 360.768388] [<c12b5000>] ? do_page_fault+0x332/0x361
[ 360.768391] [<c10b0cb0>] ? remove_vma+0x43/0x48
[ 360.768393] [<c10b19cf>] ? do_munmap+0x20c/0x226
[ 360.768396] [<c10d782a>] ? sys_ioctl+0x44/0x64
[ 360.768399] [<c12b769f>] ? sysenter_do_call+0x12/0x28
** Model information
not available
** Loaded modules:
Module Size Used by
sg 21385 0
ata_generic 12439 0
snd_pcm 52731 0
snd_timer 22171 1 snd_pcm
tpm_tis 12949 0
snd 38189 2 snd_pcm,snd_timer
tpm 17476 1 tpm_tis
soundcore 12878 1 snd
ata_piix 21079 0
tpm_bios 12799 1 tpm
snd_page_alloc 12841 1 snd_pcm
ipmi_si 35664 0
psmouse 45863 0
libata 132100 2 ata_generic,ata_piix
hpsa 35039 0
rng_core 12550 0
ipmi_msghandler 31057 1 ipmi_si
pcspkr 12515 0
evdev 17180 0
hpilo 12753 0
joydev 16906 0
serio_raw 12758 0
i5000_edac 12629 0
cciss 85450 2
edac_core 30120 3 i5000_edac
i5k_amb 12773 0
shpchp 26653 0
pci_hotplug 26303 1 shpchp
container 12525 0
processor 26983 0
button 12783 0
dm_mod 56401 0
raid1 25752 0
md_mod 80556 1 raid1
nfs 219235 2
lockd 60891 1 nfs
fscache 31438 1 nfs
auth_rpcgss 31819 1 nfs
nfs_acl 12463 1 nfs
sunrpc 137017 11 nfs,lockd,auth_rpcgss,nfs_acl
usbhid 35206 0
hid 59841 1 usbhid
uhci_hcd 21850 0
ehci_hcd 34885 0
usbcore 99225 4 usbhid,uhci_hcd,ehci_hcd
bnx2 57443 0
thermal 13058 0
thermal_sys 17667 2 processor,thermal
sr_mod 17418 0
cdrom 34631 1 sr_mod
mptscsih 22263 0
mptbase 51867 1 mptscsih
aic7xxx 97720 0
sym53c8xx 60862 0
scsi_transport_spi 19032 2 aic7xxx,sym53c8xx
BusLogic 21443 0
scsi_mod 134453 10
sg,hpsa,libata,cciss,sr_mod,mptscsih,aic7xxx,sym53c8xx,scsi_transport_spi,BusLogic
nls_iso8859_1 12421 0
nls_cp437 12417 0
vfat 16989 0
fat 44149 1 vfat
ide_gd_mod 27391 0
ide_core 65519 1 ide_gd_mod
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 5000Z Chipset Memory
Controller Hub [8086:25d0] (rev b1)
Subsystem: Hewlett-Packard Company Device [103c:31fd]
Flags: bus master, fast devsel, latency 0
Capabilities: [50] Power Management version 2
Capabilities: [58] MSI: Enable- Count=1/2 Maskable- 64bit-
Capabilities: [6c] Express Root Port (Slot-), MSI 00
Capabilities: [100] Advanced Error Reporting
00:02.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI
Express x8 Port 2-3 [8086:25f7] (rev b1) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=0e, sec-latency=0
Memory behind bridge: f9f00000-fbffffff
Prefetchable memory behind bridge: 0000000040000000-00000000400fffff
Capabilities: [50] Power Management version 2
Capabilities: [58] MSI: Enable- Count=1/2 Maskable- 64bit-
Capabilities: [6c] Express Root Port (Slot-), MSI 00
Capabilities: [100] Advanced Error Reporting
Kernel driver in use: pcieport
Kernel modules: shpchp
00:03.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI
Express x4 Port 3 [8086:25e3] (rev b1) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=17, subordinate=19, sec-latency=0
Capabilities: [50] Power Management version 2
Capabilities: [58] MSI: Enable- Count=1/2 Maskable- 64bit-
Capabilities: [6c] Express Root Port (Slot-), MSI 00
Capabilities: [100] Advanced Error Reporting
Kernel driver in use: pcieport
Kernel modules: shpchp
00:04.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI
Express x4 Port 4 [8086:25e4] (rev b1) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=0f, subordinate=11, sec-latency=0
Capabilities: [50] Power Management version 2
Capabilities: [58] MSI: Enable- Count=1/2 Maskable- 64bit-
Capabilities: [6c] Express Root Port (Slot-), MSI 00
Capabilities: [100] Advanced Error Reporting
Kernel driver in use: pcieport
Kernel modules: shpchp
00:05.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI
Express x4 Port 5 [8086:25e5] (rev b1) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=12, subordinate=16, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: fdf00000-fdffffff
Prefetchable memory behind bridge: 0000000040100000-00000000401fffff
Capabilities: [50] Power Management version 2
Capabilities: [58] MSI: Enable- Count=1/2 Maskable- 64bit-
Capabilities: [6c] Express Root Port (Slot-), MSI 00
Capabilities: [100] Advanced Error Reporting
Kernel driver in use: pcieport
Kernel modules: shpchp
00:10.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset FSB
Registers [8086:25f0] (rev b1)
Subsystem: Hewlett-Packard Company Device [103c:31fd] Subsystem:
Hewlett-Packard Company Device [103c:31fd]
Flags: fast devsel
Kernel driver in use: i5000_edac
Kernel modules: i5000_edac, i5k_amb
00:10.1 Host bridge [0600]: Intel Corporation 5000 Series Chipset FSB
Registers [8086:25f0] (rev b1)
Subsystem: Hewlett-Packard Company Device [103c:31fd]
Flags: fast devsel
Kernel modules: i5000_edac, i5k_amb
00:10.2 Host bridge [0600]: Intel Corporation 5000 Series Chipset FSB
Registers [8086:25f0] (rev b1)
Subsystem: Hewlett-Packard Company Device [103c:31fd]
Flags: fast devsel
Kernel modules: i5000_edac, i5k_amb
00:11.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset
Reserved Registers [8086:25f1] (rev b1)
Subsystem: Hewlett-Packard Company Device [103c:31fd]
Flags: fast devsel
00:13.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset
Reserved Registers [8086:25f3] (rev b1)
Subsystem: Hewlett-Packard Company Device [103c:31fd]
Flags: fast devsel
00:15.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset FBD
Registers [8086:25f5] (rev b1)
Subsystem: Hewlett-Packard Company Device [103c:31fd]
Flags: fast devsel
00:16.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset FBD
Registers [8086:25f6] (rev b1)
Subsystem: Hewlett-Packard Company Device [103c:31fd]
Flags: fast devsel
00:1c.0 PCI bridge [0604]: Intel Corporation 631xESB/632xESB/3100
Chipset PCI Express Root Port 1 [8086:2690] (rev 09) (prog-if 00
[Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
Memory behind bridge: f6000000-f7ffffff
Prefetchable memory behind bridge: 0000000040200000-00000000402fffff
Capabilities: [40] Express Root Port (Slot-), MSI 00
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: Gammagraphx, Inc. (or missing ID)
Device [0000:0000]
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel
Capabilities: [180] Root Complex Link
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 631xESB/632xESB/3100
Chipset UHCI USB Controller #1 [8086:2688] (rev 09) (prog-if 00
[UHCI])
Subsystem: Hewlett-Packard Company Device [103c:31fe]
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at 1000 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 631xESB/632xESB/3100
Chipset UHCI USB Controller #2 [8086:2689] (rev 09) (prog-if 00
[UHCI])
Subsystem: Hewlett-Packard Company Device [103c:31fe]
Flags: bus master, medium devsel, latency 0, IRQ 17
I/O ports at 1020 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 631xESB/632xESB/3100
Chipset UHCI USB Controller #3 [8086:268a] (rev 09) (prog-if 00
[UHCI])
Subsystem: Hewlett-Packard Company Device [103c:31fe]
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at 1040 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 631xESB/632xESB/3100
Chipset UHCI USB Controller #4 [8086:268b] (rev 09) (prog-if 00
[UHCI])
Subsystem: Hewlett-Packard Company Device [103c:31fe]
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at 1060 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 631xESB/632xESB/3100
Chipset EHCI USB2 Controller [8086:268c] (rev 09) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:31fe]
Flags: bus master, medium devsel, latency 0, IRQ 16
Memory at f5df0000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port: BAR=1 offset=00a0
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge
[8086:244e] (rev d9) (prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 00002000-00003fff
Memory behind bridge: f5e00000-f5ffffff
Prefetchable memory behind bridge: 00000000d8000000-00000000dfffffff
Capabilities: [50] Subsystem: Gammagraphx, Inc. (or missing ID)
Device [0000:0000]
00:1f.0 ISA bridge [0601]: Intel Corporation 631xESB/632xESB/3100
Chipset LPC Interface Controller [8086:2670] (rev 09)
Flags: bus master, medium devsel, latency 0
Kernel modules: intel-rng, iTCO_wdt
00:1f.1 IDE interface [0101]: Intel Corporation 631xESB/632xESB IDE
Controller [8086:269e] (rev 09) (prog-if 8a [Master SecP PriP])
Subsystem: Hewlett-Packard Company Device [103c:31fe]
Flags: bus master, medium devsel, latency 0, IRQ 7
I/O ports at 01f0 [size=8]
I/O ports at 03f4 [size=1]
I/O ports at 0170 [size=8]
I/O ports at 0374 [size=1]
I/O ports at 0500 [size=16]
Kernel driver in use: ata_piix
Kernel modules: ata_piix
01:03.0 VGA compatible controller [0300]: ATI Technologies Inc ES1000
[1002:515e] (rev 02) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device [103c:31fb]
Flags: bus master, stepping, medium devsel, latency 64, IRQ 7
Memory at d8000000 (32-bit, prefetchable) [size=128M]
I/O ports at 3000 [size=256]
Memory at f5ff0000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at f5e00000 [disabled] [size=128K]
Capabilities: [50] Power Management version 2
Kernel modules: radeonfb, radeon
01:04.0 System peripheral [0880]: Compaq Computer Corporation
Integrated Lights Out Controller [0e11:b203] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:3305]
Flags: medium devsel, IRQ 5
I/O ports at 2800 [size=256]
Memory at f5fe0000 (32-bit, non-prefetchable) [size=512]
Capabilities: [f0] Power Management version 3
Kernel modules: hpwdt
01:04.2 System peripheral [0880]: Compaq Computer Corporation
Integrated Lights Out Processor [0e11:b204] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:3305]
Flags: bus master, medium devsel, latency 64, IRQ 22
I/O ports at 3400 [size=256]
Memory at f5fd0000 (32-bit, non-prefetchable) [size=2K]
Memory at f5fc0000 (32-bit, non-prefetchable) [size=8K]
Memory at f5f00000 (32-bit, non-prefetchable) [size=512K]
[virtual] Expansion ROM at f5e20000 [disabled] [size=64K]
Capabilities: [f0] Power Management version 3
Kernel driver in use: hpilo
Kernel modules: hpilo
01:04.4 USB Controller [0c03]: Hewlett-Packard Company Proliant
iLO2/iLO3 virtual USB controller [103c:3300] (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:3305]
Flags: bus master, medium devsel, latency 64, IRQ 22
I/O ports at 3800 [size=32]
Capabilities: [f0] Power Management version 3
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
01:04.6 IPMI SMIC interface [0c07]: Hewlett-Packard Company Proliant
iLO2 virtual UART [103c:3302] (prog-if 01)
Subsystem: Hewlett-Packard Company Device [103c:3305]
Flags: medium devsel, IRQ 21
Memory at f5ef0000 (32-bit, non-prefetchable) [size=256]
Capabilities: [f0] Power Management version 3
Kernel driver in use: ipmi_si
02:00.0 PCI bridge [0604]: Broadcom EPB PCI-Express to PCI-X Bridge
[1166:0103] (rev c3) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=02, secondary=03, subordinate=03, sec-latency=64
Memory behind bridge: f6000000-f7ffffff
Prefetchable memory behind bridge: 0000000040200000-00000000402fffff
Capabilities: [60] Express PCI/PCI-X Bridge, MSI 00
Capabilities: [90] PCI-X bridge device
Capabilities: [b0] Power Management version 2
Capabilities: [100] Advanced Error Reporting
Capabilities: [14c] Power Budgeting <?>
Capabilities: [160] Device Serial Number 00-1b-78-ff-fe-02-7e-d8
Kernel modules: shpchp
03:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme II
BCM5708 Gigabit Ethernet [14e4:164c] (rev 12)
Subsystem: Hewlett-Packard Company NC373i Integrated Multifunction
Gigabit Server Adapter [103c:7038]
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 65
Memory at f6000000 (64-bit, non-prefetchable) [size=32M]
[virtual] Expansion ROM at 40200000 [disabled] [size=2K]
Capabilities: [40] PCI-X non-bridge device
Capabilities: [48] Power Management version 2
Capabilities: [50] Vital Product Data
Capabilities: [58] MSI: Enable+ Count=1/1 Maskable- 64bit+
Kernel driver in use: bnx2
Kernel modules: bnx2
04:00.0 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI
Express Upstream Port [8086:3500] (rev 01) (prog-if 00 [Normal
decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=04, secondary=05, subordinate=0b, sec-latency=0
Memory behind bridge: fa000000-fbffffff
Prefetchable memory behind bridge: 0000000040000000-00000000400fffff
Capabilities: [44] Express Upstream Port, MSI 00
Capabilities: [70] Power Management version 2
Capabilities: [80] Subsystem: Gammagraphx, Inc. (or missing ID)
Device [0000:0000]
Capabilities: [100] Advanced Error Reporting
Kernel driver in use: pcieport
Kernel modules: shpchp
04:00.3 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI
Express to PCI-X Bridge [8086:350c] (rev 01) (prog-if 00 [Normal
decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=04, secondary=0c, subordinate=0e, sec-latency=64
Capabilities: [44] Express PCI/PCI-X Bridge, MSI 00
Capabilities: [6c] Power Management version 2
Capabilities: [80] Subsystem: Gammagraphx, Inc. (or missing ID)
Device [0000:0000]
Capabilities: [d8] PCI-X bridge device
Capabilities: [100] Advanced Error Reporting
Kernel modules: shpchp
05:00.0 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI
Express Downstream Port E1 [8086:3510] (rev 01) (prog-if 00 [Normal
decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=05, secondary=06, subordinate=08, sec-latency=0
Capabilities: [44] Express Downstream Port (Slot-), MSI 00
Capabilities: [60] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [70] Power Management version 2
Capabilities: [80] Subsystem: Gammagraphx, Inc. (or missing ID)
Device [0000:0000]
Capabilities: [100] Advanced Error Reporting
Kernel driver in use: pcieport
Kernel modules: shpchp
05:01.0 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI
Express Downstream Port E2 [8086:3514] (rev 01) (prog-if 00 [Normal
decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=05, secondary=09, subordinate=0b, sec-latency=0
Memory behind bridge: fa000000-fbffffff
Prefetchable memory behind bridge: 0000000040000000-00000000400fffff
Capabilities: [44] Express Downstream Port (Slot-), MSI 00
Capabilities: [60] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [70] Power Management version 2
Capabilities: [80] Subsystem: Gammagraphx, Inc. (or missing ID)
Device [0000:0000]
Capabilities: [100] Advanced Error Reporting
Kernel driver in use: pcieport
Kernel modules: shpchp
09:00.0 PCI bridge [0604]: Broadcom EPB PCI-Express to PCI-X Bridge
[1166:0103] (rev c3) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=09, secondary=0a, subordinate=0a, sec-latency=64
Memory behind bridge: fa000000-fbffffff
Prefetchable memory behind bridge: 0000000040000000-00000000400fffff
Capabilities: [60] Express PCI/PCI-X Bridge, MSI 00
Capabilities: [90] PCI-X bridge device
Capabilities: [b0] Power Management version 2
Capabilities: [100] Advanced Error Reporting
Capabilities: [14c] Power Budgeting <?>
Capabilities: [160] Device Serial Number 00-1b-78-ff-fe-95-0c-76
Kernel modules: shpchp
0a:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme II
BCM5708 Gigabit Ethernet [14e4:164c] (rev 12)
Subsystem: Hewlett-Packard Company NC373T PCI Express Multifunction
Gigabit Server Adapter [103c:7037]
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 66
Memory at fa000000 (64-bit, non-prefetchable) [size=32M]
[virtual] Expansion ROM at 40000000 [disabled] [size=64K]
Capabilities: [40] PCI-X non-bridge device
Capabilities: [48] Power Management version 2
Capabilities: [50] Vital Product Data
Capabilities: [58] MSI: Enable+ Count=1/1 Maskable- 64bit+
Kernel driver in use: bnx2
Kernel modules: bnx2
12:00.0 PCI bridge [0604]: Broadcom EPB PCI-Express to PCI-X Bridge
[1166:0103] (rev b4) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=12, secondary=13, subordinate=16, sec-latency=64
I/O behind bridge: 00004000-00004fff
Memory behind bridge: fdf00000-fdffffff
Prefetchable memory behind bridge: 0000000040100000-00000000401fffff
Capabilities: [60] Express PCI/PCI-X Bridge, MSI 00
Capabilities: [90] PCI-X bridge device
Capabilities: [b0] Power Management version 2
Capabilities: [100] Advanced Error Reporting
Capabilities: [14c] Power Budgeting <?>
Kernel modules: shpchp
13:04.0 PCI bridge [0604]: Broadcom BCM5785 [HT1000] PCI/PCI-X Bridge
[1166:0104] (rev b2) (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, medium devsel, latency 64
Bus: primary=13, secondary=14, subordinate=16, sec-latency=64
Capabilities: [90] PCI-X bridge device
Kernel modules: shpchp
13:08.0 RAID bus controller [0104]: Hewlett-Packard Company Smart
Array E200i (SAS Controller) [103c:3238]
Subsystem: Hewlett-Packard Company Smart Array E200i [103c:3211]
Flags: bus master, fast devsel, latency 64, IRQ 67
Memory at fdf80000 (64-bit, non-prefetchable) [size=512K]
I/O ports at 4000 [size=256]
Memory at fdf70000 (32-bit, non-prefetchable) [size=32K]
[virtual] Expansion ROM at 40100000 [disabled] [size=16K]
Capabilities: [c0] Power Management version 2
Capabilities: [cc] MSI: Enable+ Count=1/2 Maskable- 64bit+
Capabilities: [dc] PCI-X non-bridge device
Kernel driver in use: cciss
Kernel modules: cciss, hpsa
-- System Information:
Debian Release: 6.0.1
APT prefers stable
APT policy: (990, 'stable'), (500, 'unstable'), (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.39-bpo.2-686-pae (SMP w/2 CPU cores)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.39-bpo.2-686-pae depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii initramfs-tools [linux-init 0.99~bpo60+1 tools for generating an initramfs
ii linux-base 3.3~bpo60+1 Linux image base package
ii module-init-tools 3.3-pre4-2 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.39-bpo.2-686-pae recommends:
pn firmware-linux-free <none> (no description available)
ii libc6-i686 2.11.2-10 Embedded GNU C Library: Shared lib
Versions of packages linux-image-2.6.39-bpo.2-686-pae suggests:
ii lilo 1:22.6.1-9.3 LInux LOader - The Classic OS load
pn linux-doc-2.6.39 <none> (no description available)
Versions of packages linux-image-2.6.39-bpo.2-686-pae is related to:
ii firmware-bnx2 0.32~bpo60+1 Binary firmware for Broadcom NetXt
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
ii firmware-linux-nonfree 0.28 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.39-bpo.2-686-pae/prerm/removing-running-kernel-2.6.39-bpo.2-686-pae:
true
linux-image-2.6.39-bpo.2-686-pae/postinst/ignoring-ramdisk:
linux-image-2.6.39-bpo.2-686-pae/postinst/depmod-error-initrd-2.6.39-bpo.2-686-pae:
false
linux-image-2.6.39-bpo.2-686-pae/postinst/missing-firmware-2.6.39-bpo.2-686-pae:
--- End Message ---