--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-3.2.0-3-686-pae: Sierra WWAN modem not functioning
- From: Winfried Tilanus <winfried@tilanus.com>
- Date: Tue, 10 Jul 2012 17:17:34 +0200
- Message-id: <20120710151734.5421.72211.reportbug@localhost>
Package: src
Version: 3.2.21-3
Severity: normal
Dear Maintainer,
When booting my laptop to linux-image-3.2.0-3-686-pae, I can't access my
sierra MC8775 wireless card anymore. It does wake up from rfkille but neither
network manager nor pppd directly can open a data connection. When booting
to linux-image-3.2.0-2-686-pae this problem does not exist, on that kernel I
can use the WWAN modem in a normal way.
grep "usb 6-1" /var/log/syslog
Jul 10 16:12:27 tinie kernel: [ 2.660031] usb 6-1: new full-speed USB device number 2 using uhci_hcd
Jul 10 16:12:27 tinie kernel: [ 2.893269] usb 6-1: New USB device found, idVendor=1199, idProduct=6813
Jul 10 16:12:27 tinie kernel: [ 2.893273] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Jul 10 16:12:27 tinie kernel: [ 2.893277] usb 6-1: Product: Mini Card
Jul 10 16:12:27 tinie kernel: [ 2.893279] usb 6-1: Manufacturer: Sierra Wireless, Incorporated
Jul 10 16:12:27 tinie kernel: [ 3.276289] usbserial_generic 6-1:1.0: generic converter detected
Jul 10 16:12:27 tinie kernel: [ 3.276592] usb 6-1: generic converter now attached to ttyUSB0
Jul 10 16:12:27 tinie kernel: [ 3.276876] usb 6-1: generic converter now attached to ttyUSB1
Jul 10 16:12:27 tinie kernel: [ 3.277137] usb 6-1: generic converter now attached to ttyUSB2
-- Package-specific info:
** Version:
Linux version 3.2.0-3-686-pae (Debian 3.2.21-3) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-8) ) #1 SMP Thu Jun 28 08:56:46 UTC 2012
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-3-686-pae root=UUID=b7bd6af2-1158-4b03-a0a2-6ba521fcba1b ro quiet
** Tainted: O (4096)
* Out-of-tree module has been loaded.
** Kernel log:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-3-686-pae (Debian 3.2.21-3) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-8) ) #1 SMP Thu Jun 28 08:56:46 UTC 2012
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
[ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003d6b0000 (usable)
[ 0.000000] BIOS-e820: 000000003d6b0000 - 000000003d6cc000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003d6cc000 - 000000003d700000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003d700000 - 000000003e000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: LENOVO 766949G/766949G, BIOS 7NETB8WW (2.18 ) 09/26/2008
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x3d6b0 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 03E000000 mask FFE000000 uncachable
[ 0.000000] 1 base 000000000 mask FC0000000 write-back
[ 0.000000] 2 base 03D700000 mask FFFF00000 uncachable
[ 0.000000] 3 base 03D800000 mask FFF800000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00f6980] f6980
[ 0.000000] initial memory mapped : 0 - 01a00000
[ 0.000000] Base memory trampoline at [c0099000] 99000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037800000 page 2M
[ 0.000000] 0037800000 - 00379fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 379fe000 @ 19fa000-1a00000
[ 0.000000] RAMDISK: 369b8000 - 374d4000
[ 0.000000] ACPI: RSDP 000f6950 00024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 3d6bd368 00094 (v01 LENOVO TP-7N 00002180 LTP 00000000)
[ 0.000000] ACPI: FACP 3d6bd500 000F4 (v03 LENOVO TP-7N 00002180 LNVO 00000001)
[ 0.000000] ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 (20110623/tbfadt-529)
[ 0.000000] ACPI Warning: Optional field Gpe1Block has zero address or length: 0x000000000000102C/0x0 (20110623/tbfadt-560)
[ 0.000000] ACPI: DSDT 3d6bd8db 0E32A (v01 LENOVO TP-7N 00002180 MSFT 03000000)
[ 0.000000] ACPI: FACS 3d6e4000 00040
[ 0.000000] ACPI: SSDT 3d6bd6b4 00227 (v01 LENOVO TP-7N 00002180 MSFT 03000000)
[ 0.000000] ACPI: ECDT 3d6cbc05 00052 (v01 LENOVO TP-7N 00002180 LNVO 00000001)
[ 0.000000] ACPI: TCPA 3d6cbc57 00032 (v02 LENOVO TP-7N 00002180 LNVO 00000001)
[ 0.000000] ACPI: APIC 3d6cbc89 00068 (v01 LENOVO TP-7N 00002180 LNVO 00000001)
[ 0.000000] ACPI: MCFG 3d6cbcf1 0003C (v01 LENOVO TP-7N 00002180 LNVO 00000001)
[ 0.000000] ACPI: HPET 3d6cbd2d 00038 (v01 LENOVO TP-7N 00002180 LNVO 00000001)
[ 0.000000] ACPI: SLIC 3d6cbdf0 00176 (v01 LENOVO TP-7N 00002180 LTP 00000000)
[ 0.000000] ACPI: BOOT 3d6cbf66 00028 (v01 LENOVO TP-7N 00002180 LTP 00000001)
[ 0.000000] ACPI: ASF! 3d6cbf8e 00072 (v16 LENOVO TP-7N 00002180 PTL 00000001)
[ 0.000000] ACPI: SSDT 3d6e2697 0025F (v01 LENOVO TP-7N 00002180 INTL 20050513)
[ 0.000000] ACPI: SSDT 3d6e28f6 000A6 (v01 LENOVO TP-7N 00002180 INTL 20050513)
[ 0.000000] ACPI: SSDT 3d6e299c 004F7 (v01 LENOVO TP-7N 00002180 INTL 20050513)
[ 0.000000] ACPI: SSDT 3d6e2e93 001D8 (v01 LENOVO TP-7N 00002180 INTL 20050513)
[ 0.000000] ACPI: DMI detected: Lenovo ThinkPad X61
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 92MB HIGHMEM available.
[ 0.000000] 889MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 379fe000
[ 0.000000] low ram: 0 - 379fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000379fe
[ 0.000000] HighMem 0x000379fe -> 0x0003d6b0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x0003d6b0
[ 0.000000] On node 0 totalpages: 251453
[ 0.000000] free_area_init_node: node 0, pgdat c140d640, node_mem_map f6208200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3949 pages, LIFO batch:0
[ 0.000000] Normal zone: 1748 pages used for memmap
[ 0.000000] Normal zone: 221994 pages, LIFO batch:31
[ 0.000000] HighMem zone: 186 pages used for memmap
[ 0.000000] HighMem zone: 23544 pages, LIFO batch:3
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 3e000000 (gap: 3e000000:b2000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f79db000 s33280 r0 d24064 u57344
[ 0.000000] pcpu-alloc: s33280 r0 d24064 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 249487
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-3-686-pae root=UUID=b7bd6af2-1158-4b03-a0a2-6ba521fcba1b ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000379fe:0003d6b0)
[ 0.000000] Memory: 980416k/1006272k available (2836k kernel code, 25396k reserved, 1343k data, 412k init, 94920k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
[ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
[ 0.000000] .init : 0xc1415000 - 0xc147c000 ( 412 kB)
[ 0.000000] .data : 0xc12c50ec - 0xc1414f00 (1343 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12c50ec (2836 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f5c06000 soft=f5c08000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1595.895 MHz processor.
[ 0.004002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3191.79 BogoMIPS (lpj=6383580)
[ 0.004007] pid_max: default: 32768 minimum: 301
[ 0.004046] Security Framework initialized
[ 0.004051] AppArmor: AppArmor disabled by boot time parameter
[ 0.004068] Mount-cache hash table entries: 512
[ 0.004192] Initializing cgroup subsys cpuacct
[ 0.004199] Initializing cgroup subsys memory
[ 0.004207] Initializing cgroup subsys devices
[ 0.004210] Initializing cgroup subsys freezer
[ 0.004212] Initializing cgroup subsys net_cls
[ 0.004215] Initializing cgroup subsys blkio
[ 0.004221] Initializing cgroup subsys perf_event
[ 0.004252] CPU: Physical Processor ID: 0
[ 0.004254] CPU: Processor Core ID: 0
[ 0.004258] mce: CPU supports 6 MCE banks
[ 0.004266] CPU0: Thermal monitoring enabled (TM2)
[ 0.004269] using mwait in idle threads.
[ 0.004736] ACPI: Core revision 20110623
[ 0.016058] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.016523] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.059124] CPU0: Intel(R) Core(TM)2 Duo CPU L7500 @ 1.60GHz stepping 0b
[ 0.060003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.060003] PEBS disabled due to CPU errata.
[ 0.060003] ... version: 2
[ 0.060003] ... bit width: 40
[ 0.060003] ... generic registers: 2
[ 0.060003] ... value mask: 000000ffffffffff
[ 0.060003] ... max period: 000000007fffffff
[ 0.060003] ... fixed-purpose events: 3
[ 0.060003] ... event mask: 0000000700000003
[ 0.060003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.060003] CPU 1 irqstacks, hard=f5cd2000 soft=f5cd4000
[ 0.060003] Booting Node 0, Processors #1 Ok.
[ 0.060003] smpboot cpu 1: start_ip = 99000
[ 0.008000] Initializing CPU#1
[ 0.148008] TSC synchronization [CPU#0 -> CPU#1]:
[ 0.148008] Measured 261400 cycles TSC warp between CPUs, turning off TSC clock.
[ 0.148008] Marking TSC unstable due to check_tsc_sync_source failed
[ 0.148042] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.148081] Brought up 2 CPUs
[ 0.148084] Total of 2 processors activated (6383.78 BogoMIPS).
[ 0.150672] devtmpfs: initialized
[ 0.150672] PM: Registering ACPI NVS region at 3d6cc000 (212992 bytes)
[ 0.150672] print_constraints: dummy:
[ 0.150672] NET: Registered protocol family 16
[ 0.150672] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.150672] ACPI: bus type pci registered
[ 0.150672] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.150672] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.150672] PCI: Using MMCONFIG for extended config space
[ 0.150672] PCI: Using configuration type 1 for base access
[ 0.152436] bio: create slab <bio-0> at 0
[ 0.152436] ACPI: Added _OSI(Module Device)
[ 0.152436] ACPI: Added _OSI(Processor Device)
[ 0.152436] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.152436] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.152436] ACPI: Added _OSI(Linux)
[ 0.154633] ACPI: EC: EC description table is found, configuring boot EC
[ 0.163154] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query honored via DMI
[ 0.172991] ACPI: SSDT 3d6e1b32 00282 (v01 PmRef Cpu0Ist 00000100 INTL 20050513)
[ 0.173618] ACPI: Dynamic OEM Table Load:
[ 0.173622] ACPI: SSDT (null) 00282 (v01 PmRef Cpu0Ist 00000100 INTL 20050513)
[ 0.173825] ACPI: SSDT 3d6e1e39 0085E (v01 PmRef Cpu0Cst 00000100 INTL 20050513)
[ 0.174499] ACPI: Dynamic OEM Table Load:
[ 0.174503] ACPI: SSDT (null) 0085E (v01 PmRef Cpu0Cst 00000100 INTL 20050513)
[ 0.184320] ACPI: SSDT 3d6e1a6a 000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513)
[ 0.184941] ACPI: Dynamic OEM Table Load:
[ 0.184945] ACPI: SSDT (null) 000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513)
[ 0.185075] ACPI: SSDT 3d6e1db4 00085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513)
[ 0.185683] ACPI: Dynamic OEM Table Load:
[ 0.185687] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513)
[ 0.196258] ACPI: Interpreter enabled
[ 0.196267] ACPI: (supports S0 S3 S4 S5)
[ 0.196295] ACPI: Using IOAPIC for interrupt routing
[ 0.196175] ACPI: Power Resource [PUBS] (on)
[ 0.204763] ACPI: EC: GPE = 0x12, I/O: command/status = 0x66, data = 0x62
[ 0.205297] ACPI: ACPI Dock Station Driver: 3 docks/bays found
[ 0.205297] HEST: Table not found.
[ 0.205297] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.205297] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.205297] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.205297] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.205297] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.205297] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 0.205297] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.205297] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.205297] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[ 0.205297] pci_root PNP0A08:00: host bridge window [mem 0x3e000000-0xfebfffff]
[ 0.205297] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed4bfff]
[ 0.205297] pci 0000:00:00.0: [8086:2a00] type 0 class 0x000600
[ 0.205301] pci 0000:00:02.0: [8086:2a02] type 0 class 0x000300
[ 0.205319] pci 0000:00:02.0: reg 10: [mem 0xf8100000-0xf81fffff 64bit]
[ 0.205330] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.205339] pci 0000:00:02.0: reg 20: [io 0x1800-0x1807]
[ 0.208045] pci 0000:00:02.1: [8086:2a03] type 0 class 0x000380
[ 0.208061] pci 0000:00:02.1: reg 10: [mem 0xf8200000-0xf82fffff 64bit]
[ 0.208249] pci 0000:00:19.0: [8086:1049] type 0 class 0x000200
[ 0.208307] pci 0000:00:19.0: reg 10: [mem 0xfe000000-0xfe01ffff]
[ 0.208335] pci 0000:00:19.0: reg 14: [mem 0xfe025000-0xfe025fff]
[ 0.208365] pci 0000:00:19.0: reg 18: [io 0x1840-0x185f]
[ 0.208579] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.208590] pci 0000:00:19.0: PME# disabled
[ 0.208629] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03
[ 0.208772] pci 0000:00:1a.0: reg 20: [io 0x1860-0x187f]
[ 0.208879] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03
[ 0.209024] pci 0000:00:1a.1: reg 20: [io 0x1880-0x189f]
[ 0.209157] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03
[ 0.209210] pci 0000:00:1a.7: reg 10: [mem 0xfe226c00-0xfe226fff]
[ 0.209456] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.209467] pci 0000:00:1a.7: PME# disabled
[ 0.209532] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403
[ 0.209589] pci 0000:00:1b.0: reg 10: [mem 0xfe020000-0xfe023fff 64bit]
[ 0.209851] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.209861] pci 0000:00:1b.0: PME# disabled
[ 0.209926] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604
[ 0.210206] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.210216] pci 0000:00:1c.0: PME# disabled
[ 0.210293] pci 0000:00:1c.1: [8086:2841] type 1 class 0x000604
[ 0.210575] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.210586] pci 0000:00:1c.1: PME# disabled
[ 0.210671] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03
[ 0.210817] pci 0000:00:1d.0: reg 20: [io 0x18a0-0x18bf]
[ 0.210921] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03
[ 0.211064] pci 0000:00:1d.1: reg 20: [io 0x18c0-0x18df]
[ 0.211202] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03
[ 0.211263] pci 0000:00:1d.7: reg 10: [mem 0xfe227000-0xfe2273ff]
[ 0.211527] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.211538] pci 0000:00:1d.7: PME# disabled
[ 0.211591] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.211830] pci 0000:00:1f.0: [8086:2811] type 0 class 0x000601
[ 0.212061] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.212074] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
[ 0.212082] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f)
[ 0.212089] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f)
[ 0.212097] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f)
[ 0.212210] pci 0000:00:1f.1: [8086:2850] type 0 class 0x000101
[ 0.212251] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.212279] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.212309] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.212338] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.212368] pci 0000:00:1f.1: reg 20: [io 0x18e0-0x18ef]
[ 0.212500] pci 0000:00:1f.2: [8086:2829] type 0 class 0x000106
[ 0.212568] pci 0000:00:1f.2: reg 10: [io 0x1c30-0x1c37]
[ 0.212598] pci 0000:00:1f.2: reg 14: [io 0x1c24-0x1c27]
[ 0.212627] pci 0000:00:1f.2: reg 18: [io 0x1c28-0x1c2f]
[ 0.212657] pci 0000:00:1f.2: reg 1c: [io 0x1c20-0x1c23]
[ 0.212686] pci 0000:00:1f.2: reg 20: [io 0x1c00-0x1c1f]
[ 0.212716] pci 0000:00:1f.2: reg 24: [mem 0xfe226000-0xfe2267ff]
[ 0.212888] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.212898] pci 0000:00:1f.2: PME# disabled
[ 0.212950] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05
[ 0.212989] pci 0000:00:1f.3: reg 10: [mem 0xfe227400-0xfe2274ff]
[ 0.213096] pci 0000:00:1f.3: reg 20: [io 0x1c40-0x1c5f]
[ 0.213345] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.213355] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.213363] pci 0000:00:1c.0: bridge window [mem 0xfc000000-0xfdffffff]
[ 0.213382] pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xf80fffff 64bit pref]
[ 0.213643] pci 0000:03:00.0: [8086:4227] type 0 class 0x000280
[ 0.213703] pci 0000:03:00.0: reg 10: [mem 0xdfcff000-0xdfcfffff]
[ 0.214141] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.214155] pci 0000:03:00.0: PME# disabled
[ 0.220097] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.220104] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.220111] pci 0000:00:1c.1: bridge window [mem 0xdc100000-0xdfcfffff]
[ 0.220121] pci 0000:00:1c.1: bridge window [mem 0xdfe00000-0xdfefffff 64bit pref]
[ 0.220181] pci 0000:05:00.0: [1180:0476] type 2 class 0x000607
[ 0.220240] pci 0000:05:00.0: reg 10: [mem 0xf8300000-0xf8300fff]
[ 0.220325] pci 0000:05:00.0: supports D1 D2
[ 0.220328] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.220337] pci 0000:05:00.0: PME# disabled
[ 0.220388] pci 0000:05:00.1: [1180:0832] type 0 class 0x000c00
[ 0.220440] pci 0000:05:00.1: reg 10: [mem 0xf8301000-0xf83017ff]
[ 0.220682] pci 0000:05:00.1: supports D1 D2
[ 0.220685] pci 0000:05:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.220696] pci 0000:05:00.1: PME# disabled
[ 0.220743] pci 0000:05:00.2: [1180:0822] type 0 class 0x000805
[ 0.220795] pci 0000:05:00.2: reg 10: [mem 0xf8301800-0xf83018ff]
[ 0.221039] pci 0000:05:00.2: supports D1 D2
[ 0.221042] pci 0000:05:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.221053] pci 0000:05:00.2: PME# disabled
[ 0.221211] pci 0000:00:1e.0: PCI bridge to [bus 05-08] (subtractive decode)
[ 0.221222] pci 0000:00:1e.0: bridge window [io 0x4000-0x7fff]
[ 0.221233] pci 0000:00:1e.0: bridge window [mem 0xf8300000-0xfbffffff]
[ 0.221251] pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xf7ffffff 64bit pref]
[ 0.221255] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.221259] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.221263] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.221267] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.221271] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.221275] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.221279] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.221283] pci 0000:00:1e.0: bridge window [mem 0x3e000000-0xfebfffff] (subtractive decode)
[ 0.221287] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed4bfff] (subtractive decode)
[ 0.221448] pci_bus 0000:00: on NUMA node 0
[ 0.221452] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.221634] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
[ 0.221681] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.221736] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.222124] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.222631] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.229419] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11)
[ 0.229519] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.229617] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.229715] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.229811] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.229908] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.230005] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.230102] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.230290] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.230290] vgaarb: loaded
[ 0.230290] vgaarb: bridge control possible 0000:00:02.0
[ 0.230290] PCI: Using ACPI for IRQ routing
[ 0.233256] PCI: pci_cache_line_size set to 64 bytes
[ 0.233390] reserve RAM buffer: 000000000009d800 - 000000000009ffff
[ 0.233393] reserve RAM buffer: 000000003d6b0000 - 000000003fffffff
[ 0.233535] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.233543] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.233549] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.236105] Switching to clocksource hpet
[ 0.238342] pnp: PnP ACPI init
[ 0.238360] ACPI: bus type pnp registered
[ 0.238893] pnp 00:00: [mem 0x00000000-0x0009ffff]
[ 0.238897] pnp 00:00: [mem 0x000c0000-0x000c3fff]
[ 0.238900] pnp 00:00: [mem 0x000c4000-0x000c7fff]
[ 0.238903] pnp 00:00: [mem 0x000c8000-0x000cbfff]
[ 0.238906] pnp 00:00: [mem 0x000cc000-0x000cffff]
[ 0.238909] pnp 00:00: [mem 0x000d0000-0x000cffff disabled]
[ 0.238913] pnp 00:00: [mem 0x000d4000-0x000d3fff disabled]
[ 0.238916] pnp 00:00: [mem 0x000d8000-0x000d7fff disabled]
[ 0.238919] pnp 00:00: [mem 0x000dc000-0x000dbfff disabled]
[ 0.238922] pnp 00:00: [mem 0x000e0000-0x000e3fff]
[ 0.238925] pnp 00:00: [mem 0x000e4000-0x000e7fff]
[ 0.238928] pnp 00:00: [mem 0x000e8000-0x000ebfff]
[ 0.238931] pnp 00:00: [mem 0x000ec000-0x000effff]
[ 0.238934] pnp 00:00: [mem 0x000f0000-0x000fffff]
[ 0.238937] pnp 00:00: [mem 0x00100000-0x3dffffff]
[ 0.238940] pnp 00:00: [mem 0xfec00000-0xfed3ffff]
[ 0.238943] pnp 00:00: [mem 0xfed4c000-0xffffffff]
[ 0.239027] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.239032] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[ 0.239037] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[ 0.239041] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[ 0.239045] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
[ 0.239049] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[ 0.239053] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[ 0.239057] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[ 0.239062] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[ 0.239066] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.239070] system 00:00: [mem 0x00100000-0x3dffffff] could not be reserved
[ 0.239075] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[ 0.239079] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
[ 0.239084] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.239112] pnp 00:01: [bus 00-ff]
[ 0.239116] pnp 00:01: [io 0x0cf8-0x0cff]
[ 0.239119] pnp 00:01: [io 0x0000-0x0cf7 window]
[ 0.239122] pnp 00:01: [io 0x0d00-0xffff window]
[ 0.239125] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[ 0.239129] pnp 00:01: [mem 0x000c0000-0x000c3fff window]
[ 0.239132] pnp 00:01: [mem 0x000c4000-0x000c7fff window]
[ 0.239135] pnp 00:01: [mem 0x000c8000-0x000cbfff window]
[ 0.239139] pnp 00:01: [mem 0x000cc000-0x000cffff window]
[ 0.239142] pnp 00:01: [mem 0x000d0000-0x000d3fff window]
[ 0.239145] pnp 00:01: [mem 0x000d4000-0x000d7fff window]
[ 0.239148] pnp 00:01: [mem 0x000d8000-0x000dbfff window]
[ 0.239152] pnp 00:01: [mem 0x000dc000-0x000dffff window]
[ 0.239155] pnp 00:01: [mem 0x000e0000-0x000e3fff window]
[ 0.239158] pnp 00:01: [mem 0x000e4000-0x000e7fff window]
[ 0.239161] pnp 00:01: [mem 0x000e8000-0x000ebfff window]
[ 0.239165] pnp 00:01: [mem 0x000ec000-0x000effff window]
[ 0.239168] pnp 00:01: [mem 0x3e000000-0xfebfffff window]
[ 0.239171] pnp 00:01: [mem 0xfed40000-0xfed4bfff window]
[ 0.239233] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.239289] pnp 00:02: [io 0x0010-0x001f]
[ 0.239293] pnp 00:02: [io 0x0090-0x009f]
[ 0.239295] pnp 00:02: [io 0x0024-0x0025]
[ 0.239298] pnp 00:02: [io 0x0028-0x0029]
[ 0.239303] pnp 00:02: [io 0x002c-0x002d]
[ 0.239306] pnp 00:02: [io 0x0030-0x0031]
[ 0.239308] pnp 00:02: [io 0x0034-0x0035]
[ 0.239311] pnp 00:02: [io 0x0038-0x0039]
[ 0.239314] pnp 00:02: [io 0x003c-0x003d]
[ 0.239317] pnp 00:02: [io 0x00a4-0x00a5]
[ 0.239320] pnp 00:02: [io 0x00a8-0x00a9]
[ 0.239322] pnp 00:02: [io 0x00ac-0x00ad]
[ 0.239325] pnp 00:02: [io 0x00b0-0x00b5]
[ 0.239328] pnp 00:02: [io 0x00b8-0x00b9]
[ 0.239331] pnp 00:02: [io 0x00bc-0x00bd]
[ 0.239334] pnp 00:02: [io 0x0050-0x0053]
[ 0.239336] pnp 00:02: [io 0x0072-0x0077]
[ 0.239339] pnp 00:02: [io 0x164e-0x164f]
[ 0.239342] pnp 00:02: [io 0x002e-0x002f]
[ 0.239345] pnp 00:02: [io 0x1000-0x107f]
[ 0.239348] pnp 00:02: [io 0x1180-0x11bf]
[ 0.239351] pnp 00:02: [io 0x0800-0x080f]
[ 0.239354] pnp 00:02: [io 0x15e0-0x15ef]
[ 0.239357] pnp 00:02: [io 0x1600-0x165f]
[ 0.239360] pnp 00:02: [mem 0xf0000000-0xf3ffffff]
[ 0.239363] pnp 00:02: [mem 0xfed1c000-0xfed1ffff]
[ 0.239366] pnp 00:02: [mem 0xfed14000-0xfed17fff]
[ 0.239369] pnp 00:02: [mem 0xfed18000-0xfed18fff]
[ 0.239372] pnp 00:02: [mem 0xfed19000-0xfed19fff]
[ 0.239375] pnp 00:02: [mem 0xfed45000-0xfed4bfff]
[ 0.239488] system 00:02: [io 0x164e-0x164f] has been reserved
[ 0.239492] system 00:02: [io 0x1000-0x107f] has been reserved
[ 0.239496] system 00:02: [io 0x1180-0x11bf] has been reserved
[ 0.239501] system 00:02: [io 0x0800-0x080f] has been reserved
[ 0.239505] system 00:02: [io 0x15e0-0x15ef] has been reserved
[ 0.239509] system 00:02: [io 0x1600-0x165f] could not be reserved
[ 0.239513] system 00:02: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.239518] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.239522] system 00:02: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.239526] system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.239530] system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.239535] system 00:02: [mem 0xfed45000-0xfed4bfff] has been reserved
[ 0.239539] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.239590] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.239632] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.239646] pnp 00:04: [io 0x0000-0x000f]
[ 0.239649] pnp 00:04: [io 0x0080-0x008f]
[ 0.239652] pnp 00:04: [io 0x00c0-0x00df]
[ 0.239655] pnp 00:04: [dma 4]
[ 0.239700] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.239712] pnp 00:05: [io 0x0061]
[ 0.239754] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.239767] pnp 00:06: [io 0x00f0]
[ 0.239777] pnp 00:06: [irq 13]
[ 0.239816] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.239828] pnp 00:07: [io 0x0070-0x0071]
[ 0.239835] pnp 00:07: [irq 8]
[ 0.239874] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.239887] pnp 00:08: [io 0x0060]
[ 0.239890] pnp 00:08: [io 0x0064]
[ 0.239890] pnp 00:08: [irq 1]
[ 0.239932] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.239949] pnp 00:09: [irq 12]
[ 0.239992] pnp 00:09: Plug and Play ACPI device, IDs IBM3780 PNP0f13 (active)
[ 0.240201] pnp 00:0a: [mem 0xfed40000-0xfed44fff]
[ 0.240247] pnp 00:0a: Plug and Play ACPI device, IDs ATM1200 PNP0c31 (active)
[ 0.241049] pnp: PnP ACPI: found 11 devices
[ 0.241052] ACPI: ACPI bus type pnp unregistered
[ 0.241056] PnPBIOS: Disabled by ACPI PNP
[ 0.279033] PCI: max bus depth: 2 pci_try_num: 3
[ 0.279078] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.279084] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.279092] pci 0000:00:1c.0: bridge window [mem 0xfc000000-0xfdffffff]
[ 0.279100] pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xf80fffff 64bit pref]
[ 0.279110] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.279115] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.279123] pci 0000:00:1c.1: bridge window [mem 0xdc100000-0xdfcfffff]
[ 0.279130] pci 0000:00:1c.1: bridge window [mem 0xdfe00000-0xdfefffff 64bit pref]
[ 0.279146] pci 0000:05:00.0: BAR 16: assigned [mem 0x40000000-0x43ffffff]
[ 0.279151] pci 0000:05:00.0: BAR 15: assigned [mem 0xf4000000-0xf7ffffff pref]
[ 0.279155] pci 0000:05:00.0: BAR 14: assigned [io 0x4000-0x40ff]
[ 0.279159] pci 0000:05:00.0: BAR 13: assigned [io 0x4400-0x44ff]
[ 0.279162] pci 0000:05:00.0: CardBus bridge to [bus 06-07]
[ 0.279165] pci 0000:05:00.0: bridge window [io 0x4400-0x44ff]
[ 0.279173] pci 0000:05:00.0: bridge window [io 0x4000-0x40ff]
[ 0.279181] pci 0000:05:00.0: bridge window [mem 0xf4000000-0xf7ffffff pref]
[ 0.279188] pci 0000:05:00.0: bridge window [mem 0x40000000-0x43ffffff]
[ 0.279196] pci 0000:00:1e.0: PCI bridge to [bus 05-08]
[ 0.279200] pci 0000:00:1e.0: bridge window [io 0x4000-0x7fff]
[ 0.279209] pci 0000:00:1e.0: bridge window [mem 0xf8300000-0xfbffffff]
[ 0.279215] pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xf7ffffff 64bit pref]
[ 0.279240] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.279247] pci 0000:00:1c.0: setting latency timer to 64
[ 0.279261] pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.279268] pci 0000:00:1c.1: setting latency timer to 64
[ 0.279275] pci 0000:00:1e.0: enabling device (0005 -> 0007)
[ 0.279283] pci 0000:00:1e.0: setting latency timer to 64
[ 0.279299] pci 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.279307] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.279310] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.279314] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.279317] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.279321] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.279324] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.279327] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.279331] pci_bus 0000:00: resource 11 [mem 0x3e000000-0xfebfffff]
[ 0.279334] pci_bus 0000:00: resource 12 [mem 0xfed40000-0xfed4bfff]
[ 0.279338] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.279341] pci_bus 0000:02: resource 1 [mem 0xfc000000-0xfdffffff]
[ 0.279345] pci_bus 0000:02: resource 2 [mem 0xf8000000-0xf80fffff 64bit pref]
[ 0.279348] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 0.279351] pci_bus 0000:03: resource 1 [mem 0xdc100000-0xdfcfffff]
[ 0.279355] pci_bus 0000:03: resource 2 [mem 0xdfe00000-0xdfefffff 64bit pref]
[ 0.279359] pci_bus 0000:05: resource 0 [io 0x4000-0x7fff]
[ 0.279362] pci_bus 0000:05: resource 1 [mem 0xf8300000-0xfbffffff]
[ 0.279365] pci_bus 0000:05: resource 2 [mem 0xf4000000-0xf7ffffff 64bit pref]
[ 0.279369] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.279372] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.279376] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.279379] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.279382] pci_bus 0000:05: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.279385] pci_bus 0000:05: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.279389] pci_bus 0000:05: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.279392] pci_bus 0000:05: resource 11 [mem 0x3e000000-0xfebfffff]
[ 0.279396] pci_bus 0000:05: resource 12 [mem 0xfed40000-0xfed4bfff]
[ 0.279399] pci_bus 0000:06: resource 0 [io 0x4400-0x44ff]
[ 0.279402] pci_bus 0000:06: resource 1 [io 0x4000-0x40ff]
[ 0.279406] pci_bus 0000:06: resource 2 [mem 0xf4000000-0xf7ffffff pref]
[ 0.279409] pci_bus 0000:06: resource 3 [mem 0x40000000-0x43ffffff]
[ 0.279473] NET: Registered protocol family 2
[ 0.279555] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.279842] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.280315] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.280519] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.280522] TCP reno registered
[ 0.280526] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.280539] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.280637] NET: Registered protocol family 1
[ 0.280654] pci 0000:00:02.0: Boot video device
[ 0.280672] pci 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.280695] pci 0000:00:1a.0: PCI INT A disabled
[ 0.280705] pci 0000:00:1a.1: power state changed by ACPI to D0
[ 0.280709] pci 0000:00:1a.1: power state changed by ACPI to D0
[ 0.280716] pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.280738] pci 0000:00:1a.1: PCI INT B disabled
[ 0.280748] pci 0000:00:1a.7: power state changed by ACPI to D0
[ 0.280754] pci 0000:00:1a.7: power state changed by ACPI to D0
[ 0.280770] pci 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 0.280800] pci 0000:00:1a.7: PCI INT C disabled
[ 0.280819] pci 0000:00:1d.0: power state changed by ACPI to D0
[ 0.280823] pci 0000:00:1d.0: power state changed by ACPI to D0
[ 0.280829] pci 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.280851] pci 0000:00:1d.0: PCI INT A disabled
[ 0.280866] pci 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.280889] pci 0000:00:1d.1: PCI INT B disabled
[ 0.280899] pci 0000:00:1d.7: power state changed by ACPI to D0
[ 0.280905] pci 0000:00:1d.7: power state changed by ACPI to D0
[ 0.280917] pci 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.280939] pci 0000:00:1d.7: PCI INT D disabled
[ 0.280981] PCI: CLS 64 bytes, default 64
[ 0.281043] Unpacking initramfs...
[ 0.695250] Freeing initrd memory: 11376k freed
[ 0.702614] Simple Boot Flag at 0x35 set to 0x1
[ 0.703174] audit: initializing netlink socket (disabled)
[ 0.703191] type=2000 audit(1341929506.696:1): initialized
[ 0.731042] highmem bounce pool size: 64 pages
[ 0.731049] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.734534] VFS: Disk quotas dquot_6.5.2
[ 0.734587] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.734680] msgmni has been set to 1751
[ 0.734890] alg: No test for stdrng (krng)
[ 0.734929] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.734934] io scheduler noop registered
[ 0.734936] io scheduler deadline registered
[ 0.734955] io scheduler cfq registered (default)
[ 0.735086] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.735156] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.735313] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.735376] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.735560] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.735567] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.735595] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.735599] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.735606] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 0.735631] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.735691] pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 283f ss_vid 17aa ss_did 20ad
[ 0.735721] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
[ 0.735738] pciehp 0000:00:1c.1:pcie04: HPC vendor_id 8086 device_id 2841 ss_vid 17aa ss_did 20ad
[ 0.735767] pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
[ 0.735777] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.735780] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.736249] intel_idle: does not run on family 6 model 15
[ 0.736282] ERST: Table is not found!
[ 0.736284] GHES: HEST is not enabled!
[ 0.736302] isapnp: Scanning for PnP cards...
[ 1.090880] isapnp: No Plug & Play device found
[ 1.090970] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.096397] Linux agpgart interface v0.103
[ 1.096555] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
[ 1.096660] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 1.097760] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 1.097910] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 1.098128] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 1.110837] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.110846] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.111021] mousedev: PS/2 mouse device common for all mice
[ 1.111088] rtc_cmos 00:07: RTC can wake from S4
[ 1.111241] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 1.111277] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.111290] cpuidle: using governor ladder
[ 1.111293] cpuidle: using governor menu
[ 1.111565] TCP cubic registered
[ 1.111616] NET: Registered protocol family 10
[ 1.112277] Mobile IPv6
[ 1.112281] NET: Registered protocol family 17
[ 1.112286] Registering the dns_resolver key type
[ 1.112310] Using IPI No-Shortcut mode
[ 1.112449] PM: Hibernation image not present or could not be loaded.
[ 1.112462] registered taskstats version 1
[ 1.114713] rtc_cmos 00:07: setting system clock to 2012-07-10 14:11:47 UTC (1341929507)
[ 1.114784] Initializing network drop monitor service
[ 1.114908] Freeing unused kernel memory: 412k freed
[ 1.115107] Write protecting the kernel text: 2840k
[ 1.115154] Write protecting the kernel read-only data: 1088k
[ 1.115156] NX-protecting the kernel data: 3304k
[ 1.118237] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.173867] udevd[52]: starting version 175
[ 1.229880] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
[ 1.229884] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[ 1.229921] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.229937] e1000e 0000:00:19.0: setting latency timer to 64
[ 1.230084] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 1.253128] SCSI subsystem initialized
[ 1.256717] usbcore: registered new interface driver usbfs
[ 1.256748] usbcore: registered new interface driver hub
[ 1.271036] usbcore: registered new device driver usb
[ 1.271485] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.275602] libata version 3.00 loaded.
[ 1.280805] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.282046] sdhci: Secure Digital Host Controller Interface driver
[ 1.282049] sdhci: Copyright(c) Pierre Ossman
[ 1.282384] sdhci-pci 0000:05:00.2: SDHCI controller found [1180:0822] (rev 21)
[ 1.282416] sdhci-pci 0000:05:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.283439] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1.283448] sdhci-pci 0000:05:00.2: setting latency timer to 64
[ 1.283475] mmc0: no vmmc regulator found
[ 1.297638] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.297642] ACPI: Thermal Zone [THM0] (67 C)
[ 1.298663] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.298666] ACPI: Thermal Zone [THM1] (67 C)
[ 1.301306] Registered led device: mmc0::
[ 1.305872] mmc0: SDHCI controller on PCI [0000:05:00.2] using DMA
[ 1.562460] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:16:d3:c2:38:3c
[ 1.562465] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 1.562497] e1000e 0000:00:19.0: eth0: MAC: 6, PHY: 6, PBA No: FFFFFF-0FF
[ 1.562532] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[ 1.562542] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[ 1.562558] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 1.562586] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.562591] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.562621] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.566535] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 1.566560] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe226c00
[ 1.580022] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.580065] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.580069] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.580073] usb usb1: Product: EHCI Host Controller
[ 1.580075] usb usb1: Manufacturer: Linux 3.2.0-3-686-pae ehci_hcd
[ 1.580078] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.580233] hub 1-0:1.0: USB hub found
[ 1.580240] hub 1-0:1.0: 4 ports detected
[ 1.580340] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 1.580347] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 1.580357] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.580373] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.580378] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.580388] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.580420] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.584298] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 1.584317] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe227000
[ 1.600024] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.600045] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.600049] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.600052] usb usb2: Product: EHCI Host Controller
[ 1.600055] usb usb2: Manufacturer: Linux 3.2.0-3-686-pae ehci_hcd
[ 1.600058] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.600209] hub 2-0:1.0: USB hub found
[ 1.600214] hub 2-0:1.0: 4 ports detected
[ 1.600709] ahci 0000:00:1f.2: version 3.0
[ 1.600722] ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 1.600781] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 1.600856] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x5 impl SATA mode
[ 1.600862] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc
[ 1.600869] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.601845] scsi0 : ahci
[ 1.602247] scsi1 : ahci
[ 1.602348] scsi2 : ahci
[ 1.602481] ata1: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226100 irq 43
[ 1.602484] ata2: DUMMY
[ 1.602489] ata3: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226200 irq 43
[ 1.602549] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.602561] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.602566] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.602579] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.602627] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
[ 1.602672] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.602676] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.602680] usb usb3: Product: UHCI Host Controller
[ 1.602683] usb usb3: Manufacturer: Linux 3.2.0-3-686-pae uhci_hcd
[ 1.602686] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.602868] hub 3-0:1.0: USB hub found
[ 1.602874] hub 3-0:1.0: 2 ports detected
[ 1.602971] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
[ 1.602975] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
[ 1.602982] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.602992] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.602997] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.603007] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.603049] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
[ 1.603089] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.603093] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.603096] usb usb4: Product: UHCI Host Controller
[ 1.603099] usb usb4: Manufacturer: Linux 3.2.0-3-686-pae uhci_hcd
[ 1.603102] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.603353] hub 4-0:1.0: USB hub found
[ 1.603359] hub 4-0:1.0: 2 ports detected
[ 1.603463] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 1.603468] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 1.603475] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.603485] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.603490] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.603501] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 1.603545] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0
[ 1.603586] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.603590] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.603593] usb usb5: Product: UHCI Host Controller
[ 1.603596] usb usb5: Manufacturer: Linux 3.2.0-3-686-pae uhci_hcd
[ 1.603599] usb usb5: SerialNumber: 0000:00:1d.0
[ 1.604626] hub 5-0:1.0: USB hub found
[ 1.604632] hub 5-0:1.0: 2 ports detected
[ 1.604731] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.604742] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.604747] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.604757] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 1.604802] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0
[ 1.604844] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.604848] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.604851] usb usb6: Product: UHCI Host Controller
[ 1.604854] usb usb6: Manufacturer: Linux 3.2.0-3-686-pae uhci_hcd
[ 1.604857] usb usb6: SerialNumber: 0000:00:1d.1
[ 1.605005] hub 6-0:1.0: USB hub found
[ 1.605011] hub 6-0:1.0: 2 ports detected
[ 1.605122] ata_piix 0000:00:1f.1: version 2.13
[ 1.605133] ata_piix 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16
[ 1.605180] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.608434] scsi3 : ata_piix
[ 1.608997] scsi4 : ata_piix
[ 1.609419] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18e0 irq 14
[ 1.609423] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18e8 irq 15
[ 1.609681] ata5: port disabled--ignoring
[ 1.920031] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.920381] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.920387] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.920392] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.920618] ata1.00: ATA-7: INTEL SSDSA2M160G2GC, 2CV102HD, max UDMA/133
[ 1.920622] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.920982] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.920988] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.920994] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.921222] ata1.00: configured for UDMA/133
[ 1.921375] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2M160 2CV1 PQ: 0 ANSI: 5
[ 1.928031] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.934702] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 1.934796] sd 0:0:0:0: [sda] Write Protect is off
[ 1.934800] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.934829] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.936391] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 >
[ 1.937100] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.128204] device-mapper: uevent: version 1.0.3
[ 2.128390] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 2.132026] usb 3-2: new full-speed USB device number 2 using uhci_hcd
[ 2.217215] kjournald starting. Commit interval 5 seconds
[ 2.217244] EXT3-fs (sda5): mounted filesystem with ordered data mode
[ 2.306674] usb 3-2: New USB device found, idVendor=0483, idProduct=2016
[ 2.306679] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.306682] usb 3-2: Product: Biometric Coprocessor
[ 2.306685] usb 3-2: Manufacturer: STMicroelectronics
[ 2.581530] udevd[320]: starting version 175
[ 2.660031] usb 6-1: new full-speed USB device number 2 using uhci_hcd
[ 2.679024] ACPI: Requesting acpi_cpufreq
[ 2.690378] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 2.690856] ACPI: Lid Switch [LID]
[ 2.690937] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 2.690943] ACPI: Sleep Button [SLPB]
[ 2.698287] Monitor-Mwait will be used to enter C-1 state
[ 2.706982] Monitor-Mwait will be used to enter C-2 state
[ 2.720782] Monitor-Mwait will be used to enter C-3 state
[ 2.720805] ACPI: acpi_idle registered with cpuidle
[ 2.734072] [drm] Initialized drm 1.1.0 20060810
[ 2.755080] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 2.755088] ACPI: Power Button [PWRF]
[ 2.762719] cfg80211: Calling CRDA to update world regulatory domain
[ 2.768985] tpm_tis 00:0a: 1.2 TPM (device-id 0x3203, rev-id 9)
[ 2.784842] yenta_cardbus 0000:05:00.0: CardBus bridge found [17aa:20c6]
[ 2.797106] Non-volatile memory driver v1.3
[ 2.802671] iTCO_vendor_support: vendor-support=0
[ 2.804184] i915 0000:00:02.0: power state changed by ACPI to D0
[ 2.804191] i915 0000:00:02.0: power state changed by ACPI to D0
[ 2.804200] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.804206] i915 0000:00:02.0: setting latency timer to 64
[ 2.818285] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 2.820095] ACPI: Battery Slot [BAT0] (battery present)
[ 2.820514] ACPI: AC Adapter [AC] (on-line)
[ 2.821267] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 2.821371] iTCO_wdt: Found a ICH8M-E TCO device (Version=2, TCOBASE=0x1060)
[ 2.821437] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 2.833302] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[ 2.833306] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 2.833308] thinkpad_acpi: ThinkPad BIOS 7NETB8WW (2.18 ), EC 7MHT25WW-1.03
[ 2.833311] thinkpad_acpi: Lenovo ThinkPad X61s, model 766949G
[ 2.835745] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[ 2.835753] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 2.835756] [drm] Driver supports precise vblank timestamp query.
[ 2.835799] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.845911] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[ 2.846375] thinkpad_acpi: radio switch found; radios are enabled
[ 2.855214] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is blocked
[ 2.872054] thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is unblocked
[ 2.873629] Registered led device: tpacpi::thinklight
[ 2.874796] Registered led device: tpacpi::power
[ 2.874826] Registered led device: tpacpi::standby
[ 2.874853] Registered led device: tpacpi::thinkvantage
[ 2.885449] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 2.885550] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 2.887803] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5
[ 2.893269] usb 6-1: New USB device found, idVendor=1199, idProduct=6813
[ 2.893273] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.893277] usb 6-1: Product: Mini Card
[ 2.893279] usb 6-1: Manufacturer: Sierra Wireless, Incorporated
[ 2.910318] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
[ 2.910322] iwl3945: Copyright(c) 2003-2011 Intel Corporation
[ 2.910387] iwl3945 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.910403] iwl3945 0000:03:00.0: setting latency timer to 64
[ 2.965414] yenta_cardbus 0000:05:00.0: ISA IRQ mask 0x0cb8, PCI irq 16
[ 2.965421] yenta_cardbus 0000:05:00.0: Socket status: 30000410
[ 2.965429] yenta_cardbus 0000:05:00.0: pcmcia: parent PCI bridge window: [io 0x4000-0x7fff]
[ 2.965434] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x4000-0x7fff: excluding 0x4000-0x40ff 0x4400-0x44ff
[ 2.974404] iwl3945 0000:03:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 2.974409] iwl3945 0000:03:00.0: Detected Intel Wireless WiFi Link 3945ABG
[ 2.974627] iwl3945 0000:03:00.0: irq 45 for MSI/MSI-X
[ 2.977027] Registered led device: phy0-led
[ 2.988441] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 3.009129] cfg80211: World regulatory domain updated:
[ 3.009134] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3.009138] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3.009142] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3.009146] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3.009150] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3.009153] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3.009374] cfg80211: Calling CRDA for country: EU
[ 3.029288] cfg80211: Regulatory domain changed to country: EU
[ 3.029292] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3.029296] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 3.029300] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 3.029304] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 3.029308] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[ 3.029999]
[ 3.030005] yenta_cardbus 0000:05:00.0: pcmcia: parent PCI bridge window: [mem 0xf8300000-0xfbffffff]
[ 3.030010] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf8300000-0xfbffffff: excluding 0xf8300000-0xf86cffff
[ 3.030032] yenta_cardbus 0000:05:00.0: pcmcia: parent PCI bridge window: [mem 0xf4000000-0xf7ffffff 64bit pref]
[ 3.030036] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf4000000-0xf7ffffff: excluding 0xf4000000-0xf7ffffff
[ 3.063600] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377
[ 3.066143] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7
[ 3.067172] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 3.068987] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 3.069960] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcffff 0xe0000-0xfffff
[ 3.070007] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[ 3.070052] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: clean.
[ 3.070095] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 3.075097] usbcore: registered new interface driver usbserial
[ 3.075139] USB Serial support registered for generic
[ 3.262423] [drm] initialized overlay support
[ 3.276289] usbserial_generic 6-1:1.0: generic converter detected
[ 3.276592] usb 6-1: generic converter now attached to ttyUSB0
[ 3.276876] usb 6-1: generic converter now attached to ttyUSB1
[ 3.277137] usb 6-1: generic converter now attached to ttyUSB2
[ 3.277178] usbcore: registered new interface driver usbserial_generic
[ 3.277185] usbserial: USB Serial Driver core
[ 3.279835] USB Serial support registered for Sierra USB modem
[ 3.279902] usbcore: registered new interface driver sierra
[ 3.279907] sierra: v.1.7.16:USB Driver for Sierra Wireless USB modems
[ 3.286322] fbcon: inteldrmfb (fb0) is primary device
[ 3.437907] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 3.458948] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input6
[ 3.484890] Console: switching to colour frame buffer device 128x48
[ 3.493478] fb0: inteldrmfb frame buffer device
[ 3.493482] drm: registered panic notifier
[ 3.497815] acpi device:02: registered as cooling_device2
[ 3.498152] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 3.498211] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 3.498971] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 3.499022] i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.499198] snd_hda_intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 3.499203] hda_intel: probe_mask set to 0x1 for device 17aa:20ac
[ 3.499275] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 3.499314] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 3.616107] usb 3-1: new full-speed USB device number 3 using uhci_hcd
[ 3.781713] usb 3-1: New USB device found, idVendor=0a5c, idProduct=2110
[ 3.781723] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.781730] usb 3-1: Product: BCM2045B
[ 3.781735] usb 3-1: Manufacturer: Broadcom Corp
[ 3.802947] Bluetooth: Core ver 2.16
[ 3.802970] NET: Registered protocol family 31
[ 3.802973] Bluetooth: HCI device and connection manager initialized
[ 3.802976] Bluetooth: HCI socket layer initialized
[ 3.802979] Bluetooth: L2CAP socket layer initialized
[ 3.802986] Bluetooth: SCO socket layer initialized
[ 3.804361] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 3.804608] usbcore: registered new interface driver btusb
[ 3.902702] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[ 3.924063] pcmcia_socket pcmcia_socket0: pccard: PCMCIA card inserted into slot 0
[ 3.924071] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf86d0000-0xfbffffff: excluding 0xf8df4000-0xf9185fff 0xf9fce000-0xfa35ffff 0xfae16000-0xfb1a7fff 0xfbff0000-0xfc381fff
[ 3.934287] pcmcia 0.0: pcmcia: registering new device pcmcia0.0 (IRQ: 3)
[ 4.050959] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 4.067516] nf_conntrack version 0.5.0 (15503 buckets, 62012 max)
[ 4.097987] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 4.880508] EXT3-fs (sda5): using internal journal
[ 4.931065] loop: AES key scrubbing enabled
[ 4.940684] loop: loaded (max 8 devices)
[ 9.444097] usb 5-1: new full-speed USB device number 2 using uhci_hcd
[ 9.646135] usb 5-1: New USB device found, idVendor=04e6, idProduct=5115
[ 9.646143] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[ 9.646150] usb 5-1: Product: SCR33x USB Smart Card Reader
[ 9.646156] usb 5-1: Manufacturer: SCM Microsystems Inc.
[ 9.646162] usb 5-1: SerialNumber: 21121042202012
[ 9.684573] WARNING! power/level is deprecated; use power/control instead
[ 30.509852] thinkpad_ec: thinkpad_ec 0.41 loaded.
[ 30.510945] tp_smapi 0.41 loading...
[ 30.511242] tp_smapi successfully loaded (smapi_port=0xb2).
[ 31.630958] Adding 2154560k swap on /dev/loop4. Priority:-1 extents:1 across:2154560k
[ 31.896209] usb 5-1: USB disconnect, device number 2
[ 35.603536] kjournald starting. Commit interval 5 seconds
[ 35.603754] EXT3-fs (loop5): using internal journal
[ 35.603759] EXT3-fs (loop5): mounted filesystem with ordered data mode
[ 35.606532] kjournald starting. Commit interval 5 seconds
[ 35.606768] EXT3-fs (loop6): using internal journal
[ 35.606773] EXT3-fs (loop6): mounted filesystem with ordered data mode
[ 35.610347] kjournald starting. Commit interval 5 seconds
[ 35.610570] EXT3-fs (loop7): using internal journal
[ 35.610574] EXT3-fs (loop7): mounted filesystem with ordered data mode
[ 36.652130] RPC: Registered named UNIX socket transport module.
[ 36.652138] RPC: Registered udp transport module.
[ 36.652144] RPC: Registered tcp transport module.
[ 36.652149] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 36.665595] FS-Cache: Loaded
[ 36.689992] FS-Cache: Netfs 'nfs' registered for caching
[ 36.703023] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 37.154522] fuse init (API version 7.17)
[ 37.810347] NET: Registered protocol family 15
[ 37.814453] alg: No test for cipher_null (cipher_null-generic)
[ 37.814526] alg: No test for ecb(cipher_null) (ecb-cipher_null)
[ 37.814590] alg: No test for digest_null (digest_null-generic)
[ 37.814652] alg: No test for compress_null (compress_null-generic)
[ 39.107097] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input9
[ 39.228594] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 39.284115] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 39.284491] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 39.298676] iwl3945 0000:03:00.0: loaded firmware version 15.32.2.9
[ 39.369208] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 39.495888] Bluetooth: RFCOMM TTY layer initialized
[ 39.495895] Bluetooth: RFCOMM socket layer initialized
[ 39.495898] Bluetooth: RFCOMM ver 1.11
[ 39.502148] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 39.502152] Bluetooth: BNEP filters: protocol multicast
[ 39.746666] lp: driver loaded but no devices found
[ 39.755172] ppdev: user-space parallel port driver
[ 41.304338] Bridge firewalling registered
[ 41.458649] ADDRCONF(NETDEV_UP): virbr0: link is not ready
[ 42.560086] usb 3-1: USB disconnect, device number 3
[ 42.924029] smapi smapi: set_real_thresh: set start to 74 for bat=0
[ 43.148023] smapi smapi: set_real_thresh: set stop to 95 for bat=0
[ 43.872569] e1000e 0000:00:19.0: PCI INT A disabled
[ 43.872583] e1000e 0000:00:19.0: PME# enabled
[ 44.048086] usb 6-1: USB disconnect, device number 2
[ 44.048333] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[ 44.049947] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[ 44.050029] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[ 44.050050] usbserial_generic 6-1:1.0: device disconnected
[ 46.384189] wlan0: authenticate with 00:02:6f:4a:fe:0d (try 1)
[ 46.384733] wlan0: authenticated
[ 46.390641] wlan0: associate with 00:02:6f:4a:fe:0d (try 1)
[ 46.393977] wlan0: RX AssocResp from 00:02:6f:4a:fe:0d (capab=0x131 status=0 aid=1)
[ 46.393985] wlan0: associated
[ 46.395879] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 46.804167] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[ 46.804317] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D3
[ 46.808599] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[ 46.816100] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[ 46.817420] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3
[ 46.825943] ehci_hcd 0000:00:1d.7: PCI INT D disabled
[ 46.826017] ehci_hcd 0000:00:1d.7: PME# enabled
[ 46.826051] ehci_hcd 0000:00:1a.7: PCI INT C disabled
[ 46.826114] ehci_hcd 0000:00:1a.7: PME# enabled
[ 46.840080] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
[ 46.840103] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3
[ 47.011319] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 47.011337] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 47.048296] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 47.048307] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 47.049663] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 47.049673] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 47.049687] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 47.049701] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 47.088190] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
[ 47.088200] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
[ 47.088311] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
[ 47.088320] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
[ 47.088333] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 47.088348] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 47.177875] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 47.192135] ehci_hcd 0000:00:1d.7: BAR 0: set to [mem 0xfe227000-0xfe2273ff] (PCI address [0xfe227000-0xfe2273ff])
[ 47.192149] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 47.192177] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x400, writing 0x40b)
[ 47.192222] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900102)
[ 47.192266] ehci_hcd 0000:00:1d.7: PME# disabled
[ 47.192278] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 47.192290] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 47.192305] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 47.192319] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 47.220202] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[ 47.236066] ehci_hcd 0000:00:1a.7: BAR 0: set to [mem 0xfe226c00-0xfe226fff] (PCI address [0xfe226c00-0xfe226fff])
[ 47.236080] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[ 47.236106] ehci_hcd 0000:00:1a.7: restoring config space at offset 0xf (was 0x300, writing 0x30b)
[ 47.236150] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900102)
[ 47.236189] ehci_hcd 0000:00:1a.7: PME# disabled
[ 47.236202] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[ 47.236214] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[ 47.236230] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 47.236244] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 51.808356] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[ 51.808674] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[ 51.809673] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3
[ 51.809741] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D3
[ 51.816130] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[ 51.824134] ehci_hcd 0000:00:1d.7: PCI INT D disabled
[ 51.824207] ehci_hcd 0000:00:1d.7: PME# enabled
[ 51.824240] ehci_hcd 0000:00:1a.7: PCI INT C disabled
[ 51.824303] ehci_hcd 0000:00:1a.7: PME# enabled
[ 51.840127] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3
[ 51.840149] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
[ 53.828133] uhci_hcd 0000:00:1a.0: PCI INT A disabled
** Model information
not available
** Loaded modules:
cpufreq_userspace
cpufreq_stats
cpufreq_powersave
cpufreq_conservative
ipt_MASQUERADE
ipt_REJECT
xt_CHECKSUM
bridge
stp
parport_pc
ppdev
lp
parport
bnep
rfcomm
binfmt_misc
deflate
zlib_deflate
ctr
twofish_generic
twofish_i586
twofish_common
camellia
serpent
blowfish_generic
blowfish_common
cast5
des_generic
cbc
cryptd
aes_i586
aes_generic
xcbc
rmd160
sha512_generic
sha256_generic
sha1_generic
hmac
crypto_null
af_key
fuse
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
kvm_intel
kvm
tifm_sd
tifm_core
tp_smapi(O)
thinkpad_ec(O)
crc_itu_t
uinput
dm_crypt
loop(O)
nf_conntrack_ipv6
nf_defrag_ipv6
xt_state
xt_tcpudp
ip6table_mangle
ip6table_filter
ip6_tables
iptable_mangle
iptable_nat
nf_nat
nf_conntrack_ipv4
nf_defrag_ipv4
nf_conntrack
iptable_filter
ip_tables
x_tables
cm4040_cs
snd_hda_codec_analog
btusb
bluetooth
crc16
sierra
usbserial
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_pcm_oss
snd_mixer_oss
pcmcia
snd_pcm
snd_page_alloc
snd_seq_midi
snd_seq_midi_event
snd_rawmidi
arc4
snd_seq
snd_seq_device
snd_timer
iwl3945
iwl_legacy
coretemp
i2c_i801
thinkpad_acpi
psmouse
iTCO_wdt
pcspkr
evdev
serio_raw
i915
iTCO_vendor_support
ac
battery
nvram
power_supply
yenta_socket
mac80211
snd
pcmcia_rsrc
pcmcia_core
tpm_tis
tpm
tpm_bios
cfg80211
acpi_cpufreq
rfkill
video
drm_kms_helper
drm
soundcore
i2c_algo_bit
i2c_core
mperf
button
processor
ext3
mbcache
jbd
dm_mirror
dm_region_hash
dm_log
dm_mod
sd_mod
crc_t10dif
ata_generic
ata_piix
sdhci_pci
sdhci
uhci_hcd
ahci
libahci
ehci_hcd
thermal
thermal_sys
mmc_core
libata
scsi_mod
e1000e
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 0c)
Subsystem: Lenovo T61 [17aa:20b3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) [8086:2a02] (rev 0c) (prog-if 00 [VGA controller])
Subsystem: Lenovo T61 [17aa:20b5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 44
Region 0: Memory at f8100000 (64-bit, non-prefetchable) [size=1M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 1800 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) [8086:2a03] (rev 0c)
Subsystem: Lenovo T61 [17aa:20b5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f8200000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:19.0 Ethernet controller [0200]: Intel Corporation 82566MM Gigabit Network Connection [8086:1049] (rev 03)
Subsystem: Lenovo Device [17aa:20de]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 42
Region 0: Memory at fe000000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at fe025000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 1840 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
00:1a.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo ThinkPad T61 [17aa:20aa]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 1860 [size=32]
Kernel driver in use: uhci_hcd
00:1a.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo ThinkPad T60 [17aa:20aa]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 1880 [size=32]
Kernel driver in use: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 03) (prog-if 20 [EHCI])
Subsystem: Lenovo ThinkPad T61 [17aa:20ab]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 22
Region 0: Memory at fe226c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03)
Subsystem: Lenovo ThinkPad T61 [17aa:20ac]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 46
Region 0: Memory at fe020000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: fc000000-fdffffff
Prefetchable memory behind bridge: 00000000f8000000-00000000f80fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: dc100000-dfcfffff
Prefetchable memory behind bridge: 00000000dfe00000-00000000dfefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo ThinkPad T61 [17aa:20aa]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 18a0 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo ThinkPad T61 [17aa:20aa]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 18c0 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 03) (prog-if 20 [EHCI])
Subsystem: Lenovo ThinkPad T61 [17aa:20ab]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin D routed to IRQ 19
Region 0: Memory at fe227000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f3) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=08, sec-latency=32
I/O behind bridge: 00004000-00007fff
Memory behind bridge: f8300000-fbffffff
Prefetchable memory behind bridge: 00000000f4000000-00000000f7ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HEM (ICH8M-E) LPC Interface Controller [8086:2811] (rev 03)
Subsystem: Lenovo T61 [17aa:20b6]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.1 IDE interface [0101]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: Lenovo ThinkPad T61 [17aa:20a6]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin C routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 18e0 [size=16]
Kernel driver in use: ata_piix
00:1f.2 SATA controller [0106]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] [8086:2829] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: Lenovo ThinkPad T61 [17aa:20a7]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 43
Region 0: I/O ports at 1c30 [size=8]
Region 1: I/O ports at 1c24 [size=4]
Region 2: I/O ports at 1c28 [size=8]
Region 3: I/O ports at 1c20 [size=4]
Region 4: I/O ports at 1c00 [size=32]
Region 5: Memory at fe226000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 03)
Subsystem: Lenovo ThinkPad T61 [17aa:20a9]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fe227400 (32-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 1c40 [size=32]
Kernel driver in use: i801_smbus
03:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4227] (rev 02)
Subsystem: Intel Corporation ThinkPad R60e/X60s [8086:1011]
Physical Slot: 3
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 45
Region 0: Memory at dfcff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: iwl3945
05:00.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev ba)
Subsystem: Lenovo Device [17aa:20c6]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f8300000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=05, secondary=06, subordinate=07, sec-latency=176
Memory window 0: f4000000-f7ffffff (prefetchable)
Memory window 1: 40000000-43ffffff
I/O window 0: 00004400-000044ff
I/O window 1: 00004000-000040ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
05:00.1 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 04) (prog-if 10 [OHCI])
Subsystem: Lenovo Device [17aa:20c7]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 1000ns max)
Interrupt: pin B routed to IRQ 11
Region 0: Memory at f8301000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
05:00.2 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 21)
Subsystem: Lenovo Device [17aa:20c8]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f8301800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 0483:2016 SGS Thomson Microelectronics Fingerprint Reader
Bus 006 Device 004: ID 1199:6813 Sierra Wireless, Inc.
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (800, 'testing'), (500, 'unstable'), (300, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 3.2.0-3-686-pae (SMP w/2 CPU cores)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-3.2.0-3-686-pae depends on:
ii debconf [debconf-2.0] 1.5.44
ii initramfs-tools [linux-initramfs-tool] 0.106
ii kmod 8-2
ii linux-base 3.5
ii module-init-tools 8-2
Versions of packages linux-image-3.2.0-3-686-pae recommends:
ii firmware-linux-free 3.1
ii libc6-i686 2.13-33
Versions of packages linux-image-3.2.0-3-686-pae suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-22.1
ii linux-doc-3.2 3.2.21-3
Versions of packages linux-image-3.2.0-3-686-pae is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 0.36
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information excluded
--- End Message ---