Bug#982840: linux-image-5.10.0-3-arm64: requesting scsi_debug.ko for arm64/armhf helping systemd autopkgtest
Package: src:linux
Version: 5.10.13-1
Severity: wishlist
Dear Maintainer,
Latest autopkgtest Salsa supports arm64&armhf QEMU testbeds.
When we apply autopkgtest-virt-qemu --dpkg-architecture=arm64 or armhf on
systemd, the "storage" test fails because of
modprobe: FATAL: Module scsi_debug not found in directory /lib/modules/5.10.0-3-arm64
I talked with Michael Biebl on
https://salsa.debian.org/ci-team/autopkgtest/-/merge_requests/113#note_227958
he wondered if it is possible to enable scsi_debug on arm64&armhf.
Best regards, Ryutaroh Matsumoto
-- Package-specific info:
** Version:
Linux version 5.10.0-3-arm64 (debian-kernel@lists.debian.org) (gcc-10 (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.1) #1 SMP Debian 5.10.13-1 (2021-02-06)
** Command line:
dma.dmachans=0x37f5 bcm2709.boardrev=0xd03114 bcm2709.serial=0x488d2af3 bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0 smsc95xx.macaddr=DC:A6:32:BB:99:D9 vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=tty0 console=ttyS1,115200 root=LABEL=RASPIROOT rw fsck.repair=yes net.ifnames=0 rootwait rootfstype=ext4 module_blacklist=vc4
** Tainted: C (1024)
* staging driver was loaded
** Kernel log:
[ 20.631603] systemd[1]: Mounting Huge Pages File System...
[ 20.683486] systemd[1]: Mounting POSIX Message Queue File System...
[ 20.736492] systemd[1]: Mounting Kernel Debug File System...
[ 20.787618] systemd[1]: Mounting Kernel Trace File System...
[ 20.836925] systemd[1]: Starting Restore / save the current clock...
[ 20.889264] systemd[1]: Starting Set the console keyboard layout...
[ 20.940552] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 20.992153] systemd[1]: Starting Load Kernel Module configfs...
[ 21.044220] systemd[1]: Starting Load Kernel Module drm...
[ 21.095387] systemd[1]: Starting Load Kernel Module fuse...
[ 21.138735] fuse: init (API version 7.32)
[ 21.163989] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 21.164255] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 21.227986] systemd[1]: Starting Journal Service...
[ 21.464155] systemd[1]: Starting Load Kernel Modules...
[ 21.513840] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 21.563344] EXT4-fs (sda2): re-mounted. Opts: journal_async_commit,nobarrier,data=writeback,commit=3600
[ 21.564141] systemd[1]: Starting Coldplug All udev Devices...
[ 21.651478] systemd[1]: Mounted Huge Pages File System.
[ 21.694010] systemd[1]: Started Journal Service.
[ 22.064408] systemd-journald[243]: Received client request to flush runtime journal.
[ 37.861091] vcc-sd: disabling
[ 39.399477] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 39.439887] vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 39.488816] iproc-rng200 fe104000.rng: hwrng registered
[ 39.516318] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 39.610584] Module vc4 is blacklisted
[ 39.638493] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 39.657619] cfg80211: Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[ 39.678583] cfg80211: Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[ 39.700179] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 39.706556] io scheduler kyber registered
[ 39.719922] platform regulatory.0: firmware: direct-loading firmware regulatory.db
[ 39.787993] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s
[ 39.813752] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[ 39.844975] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 39.863636] usbcore: registered new interface driver brcmfmac
[ 39.877152] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[ 39.905384] bcm2835_audio bcm2835_audio: card created with 8 channels
[ 39.907090] brcmfmac mmc0:0001:1: firmware: direct-loading firmware brcm/brcmfmac43455-sdio.bin
[ 39.925440] mc: Linux media interface: v0.10
[ 39.956391] brcmfmac mmc0:0001:1: firmware: direct-loading firmware brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.txt
[ 40.102108] videodev: Linux video capture interface: v2.00
[ 40.107976] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 40.108103] brcmfmac mmc0:0001:1: firmware: failed to load brcm/brcmfmac43455-sdio.clm_blob (-2)
[ 40.108107] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
[ 40.108113] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
[ 40.109706] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Mar 1 2015 07:29:38 version 7.45.18 (r538002) FWID 01-6a2c8ad4
[ 40.117310] cryptd: max_cpu_qlen set to 1000
[ 40.149737] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 40.218500] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[ 40.365211] Adding 10485736k swap on /dev/sda3. Priority:-2 extents:1 across:10485736k FS
[ 40.517919] Bluetooth: Core ver 2.22
[ 40.521931] NET: Registered protocol family 31
[ 40.526640] Bluetooth: HCI device and connection manager initialized
[ 40.533231] Bluetooth: HCI socket layer initialized
[ 40.538359] Bluetooth: L2CAP socket layer initialized
[ 40.543720] Bluetooth: SCO socket layer initialized
[ 40.614172] Bluetooth: HCI UART driver ver 2.3
[ 40.618890] Bluetooth: HCI UART protocol H4 registered
[ 40.624398] Bluetooth: HCI UART protocol LL registered
[ 40.629730] Bluetooth: HCI UART protocol ATH3K registered
[ 40.635454] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 40.642291] Bluetooth: HCI UART protocol Intel registered
[ 40.648379] Bluetooth: HCI UART protocol Broadcom registered
[ 40.654396] Bluetooth: HCI UART protocol QCA registered
[ 40.658544] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator
[ 40.659789] Bluetooth: HCI UART protocol AG6XX registered
[ 40.667921] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator
[ 40.673192] Bluetooth: HCI UART protocol Marvell registered
[ 40.811324] uart-pl011 fe201000.serial: no DMA platform data
[ 40.915175] audit: type=1400 audit(1613290449.815:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=495 comm="apparmor_parser"
[ 40.932751] audit: type=1400 audit(1613290449.815:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=494 comm="apparmor_parser"
[ 40.951754] audit: type=1400 audit(1613290449.823:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=497 comm="apparmor_parser"
[ 40.969680] audit: type=1400 audit(1613290449.843:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=499 comm="apparmor_parser"
[ 40.986733] audit: type=1400 audit(1613290449.879:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=502 comm="apparmor_parser"
[ 41.003996] audit: type=1400 audit(1613290449.879:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=502 comm="apparmor_parser"
[ 41.021856] audit: type=1400 audit(1613290449.887:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=503 comm="apparmor_parser"
[ 41.037354] audit: type=1400 audit(1613290449.887:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=503 comm="apparmor_parser"
[ 41.053949] audit: type=1400 audit(1613290449.887:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=503 comm="apparmor_parser"
[ 41.077660] Bluetooth: hci0: BCM: chip id 107
[ 41.082464] Bluetooth: hci0: BCM: features 0x2f
[ 41.088685] Bluetooth: hci0: BCM4345C0
[ 41.092589] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000
[ 41.098790] bluetooth hci0: firmware: failed to load brcm/BCM4345C0.hcd (-2)
[ 41.106136] bluetooth hci0: firmware: failed to load brcm/BCM.hcd (-2)
[ 41.113611] Bluetooth: hci0: BCM: firmware Patch file not found, tried:
[ 41.121157] Bluetooth: hci0: BCM: 'brcm/BCM4345C0.hcd'
[ 41.127027] Bluetooth: hci0: BCM: 'brcm/BCM.hcd'
[ 41.137868] audit: type=1400 audit(1613290450.039:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=493 comm="apparmor_parser"
[ 42.311901] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 42.318100] Bluetooth: BNEP filters: protocol multicast
[ 42.324169] Bluetooth: BNEP socket layer initialized
[ 42.346307] NET: Registered protocol family 38
[ 42.913766] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
[ 42.923972] bcmgenet fd580000.ethernet eth0: Link is Down
[ 52.080688] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 54.783393] rfkill: input handler disabled
[ 60.769413] rfkill: input handler enabled
[ 131.607272] hrtimer: interrupt took 8448 ns
** Model information
Device Tree model: Raspberry Pi 4 Model B Rev 1.4
** Loaded modules:
algif_hash
algif_skcipher
af_alg
bnep
binfmt_misc
nls_ascii
nls_cp437
vfat
fat
hci_uart
btqca
btrtl
btbcm
btsdio
btintel
bluetooth
jitterentropy_rng
aes_neon_bs
bcm2835_v4l2(C)
bcm2835_mmal_vchiq(C)
videobuf2_vmalloc
videobuf2_memops
aes_neon_blk
videobuf2_v4l2
crypto_simd
videobuf2_common
cryptd
videodev
mc
snd_bcm2835(C)
drbg
brcmfmac
aes_arm64
brcmutil
aes_generic
kyber_iosched
ansi_cprng
cfg80211
joydev
ecdh_generic
rfkill
snd_soc_core
evdev
ecc
sg
iproc_rng200
snd_pcm_dmaengine
libaes
snd_pcm
vchiq(C)
pwm_bcm2835
snd_timer
snd
rng_core
bcm2835_wdt
soundcore
cec
bcm2711_thermal
drm_kms_helper
leds_gpio
cpufreq_dt
drm
fuse
configfs
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
btrfs
blake2b_generic
sd_mod
t10_pi
crc_t10dif
crct10dif_generic
xor
xor_neon
hid_generic
usbhid
hid
uas
usb_storage
scsi_mod
raid6_pq
libcrc32c
crc32c_generic
vhost_net
tun
vhost
vhost_iotlb
tap
bfq
dwc2
xhci_pci
broadcom
udc_core
bcm_phy_lib
xhci_hcd
roles
mdio_bcm_unimac
genet
usbcore
of_mdio
crct10dif_ce
crct10dif_common
sdhci_iproc
raspberrypi_cpufreq
reset_raspberrypi
i2c_bcm2835
sdhci_pltfm
usb_common
fixed_phy
libphy
fixed
sdhci
gpio_regulator
phy_generic
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000
link/ether dc:a6:32:bb:99:d9 brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether dc:a6:32:bb:99:da brd ff:ff:ff:ff:ff:ff
inet 192.168.1.84/24 brd 192.168.1.255 scope global dynamic noprefixroute wlan0
valid_lft 39922sec preferred_lft 39922sec
inet6 2400:4050:2ba1:ac00:c5d7:4a4d:b3f9:a36f/64 scope global dynamic noprefixroute
valid_lft 14105sec preferred_lft 12305sec
inet6 fe80::115b:96a0:c28:c09d/64 scope link noprefixroute
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 97496 822 0 0 0 0 0 0 97496 822 0 0 0 0 0 0
eth0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
wlan0: 15011736027 10726265 0 0 0 0 0 1945 128160875 1350346 0 0 0 0 0 0
** PCI devices:
00:00.0 PCI bridge [0604]: Broadcom Inc. and subsidiaries BCM2711 PCIe Bridge [14e4:2711] (rev 10) (prog-if 00 [Normal decode])
Device tree node: /sys/firmware/devicetree/base/scb/pcie@7d500000/pci@1,0
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 50
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00000000-00000fff [size=4K]
Memory behind bridge: f8000000-f80fffff [size=1M]
Prefetchable memory behind bridge: [disabled]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [48] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [ac] Express (v2) Root Port (Slot-), MSI 00
DevCap: MaxPayload 512 bytes, PhantFunc 0
ExtTag- RBE+
DevCtl: CorrErr+ NonFatalErr+ FatalErr+ UnsupReq+
RlxdOrd+ ExtTag- PhantFunc- AuxPwr+ NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <1us, L1 <2us
ClockPM+ Surprise- LLActRep- BwNot+ ASPMOptComp+
LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s (ok), Width x1 (ok)
TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt+
RootCap: CRSVisible+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible+
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ NROPrPrP- LTR+
10BitTagComp- 10BitTagReq- OBFF Via WAKE#, ExtFmt- EETLPPrefix-
EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
FRS- LN System CLS Not Supported, TPHComp- ExtTPHComp- ARIFwd-
AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR+ OBFF Disabled, ARIFwd-
AtomicOpsCtl: ReqEn- EgressBlck-
LnkCap2: Supported Link Speeds: 2.5-5GT/s, Crosslink- Retimer- 2Retimers- DRS+
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1-
EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
Retimer- 2Retimers- CrosslinkRes: unsupported, DRS-
DownstreamComp: Link Down - Not Determined
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn-
MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
HeaderLog: 00000000 00000000 00000000 00000000
RootCmd: CERptEn+ NFERptEn+ FERptEn+
RootSta: CERcvd- MultCERcvd- UERcvd- MultUERcvd-
FirstFatal- NonFatalMsg- FatalMsg- IntMsg 0
ErrorSrc: ERR_COR: 0000 ERR_FATAL/NONFATAL: 0000
Capabilities: [180 v1] Vendor Specific Information: ID=0000 Rev=0 Len=028 <?>
Capabilities: [240 v1] L1 PM Substates
L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+
PortCommonModeRestoreTime=8us PortTPowerOnTime=10us
L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2- ASPM_L1.1-
T_CommonMode=1us LTR1.2_Threshold=0ns
L1SubCtl2: T_PwrOn=10us
Kernel driver in use: pcieport
01:00.0 USB controller [0c03]: VIA Technologies, Inc. VL805 USB 3.0 Host Controller [1106:3483] (rev 01) (prog-if 30 [XHCI])
Subsystem: VIA Technologies, Inc. VL805 USB 3.0 Host Controller [1106:3483]
Device tree node: /sys/firmware/devicetree/base/scb/pcie@7d500000/pci@1,0/usb@1,0
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 51
Region 0: Memory at 600000000 (64-bit, non-prefetchable) [size=4K]
Capabilities: [80] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot-,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] MSI: Enable+ Count=1/4 Maskable- 64bit+
Address: 00000000fffffffc Data: 6540
Capabilities: [c4] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 0.000W
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <2us, L1 <16us
ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp-
LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s (ok), Width x1 (ok)
TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Range B, TimeoutDis+ NROPrPrP- LTR-
10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix-
EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
FRS- TPHComp- ExtTPHComp-
AtomicOpsCap: 32bit- 64bit- 128bitCAS-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- OBFF Disabled,
AtomicOpsCtl: ReqEn-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis+
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete- EqualizationPhase1-
EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
Retimer- 2Retimers- CrosslinkRes: unsupported
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn-
MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
HeaderLog: 00000000 00000000 00000000 00000000
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
** USB devices:
Bus 002 Device 002: ID 056e:6a13 Elecom Co., Ltd ESD-EMN
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 1a2c:4324 China Resource Semico Co., Ltd USB Keyboard
Bus 001 Device 003: ID 15ca:00c3 Textech International Ltd. Mini Optical Mouse
Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: bullseye/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'unstable'), (1, 'experimental')
Architecture: arm64 (aarch64)
Kernel: Linux 5.10.0-3-arm64 (SMP w/4 CPU threads)
Kernel taint flags: TAINT_CRAP
Locale: LANG=C.UTF-8, LC_CTYPE=C.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-5.10.0-3-arm64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.139
ii kmod 28-1
ii linux-base 4.6
Versions of packages linux-image-5.10.0-3-arm64 recommends:
ii apparmor 2.13.6-9
ii firmware-linux-free 20200122-1
Versions of packages linux-image-5.10.0-3-arm64 suggests:
pn debian-kernel-handbook <none>
pn linux-doc-5.10 <none>
Versions of packages linux-image-5.10.0-3-arm64 is related to:
pn firmware-amd-graphics <none>
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
ii firmware-brcm80211 20201218-3
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
ii firmware-misc-nonfree 20201218-3
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
Reply to: