--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-5.10.0-2-amd64: dummy_hcd + g_mass_storage doesn't work
- From: KeyofBlueS <KeyofBlueS@gmail.com>
- Date: Sat, 23 Jan 2021 14:18:21 +0100
- Message-id: <161140790093.13725.2341931083824532317.reportbug@localhost>
Package: src:linux
Version: 5.10.9-1
Severity: important
X-Debbugs-Cc: KeyofBlueS@gmail.com
Dear Maintainers,
With the last kernel 5.10.9-1 (compiled in order to enable g_mass_storage),
modules dummy_hcd + g_mass_storage doesn't work.
With kernel 5.10.4-1 (also compiled in order to enable g_mass_storage) works as
expected (don't know about 5.10.5-1)
dmesg on "sudo modprobe dummy_hcd" Linux debian 5.10.9-custom #1 SMP Sat Jan 23
11:38:18 CET 2021 x86_64 GNU/Linux:
[ 105.826242] dummy_hcd dummy_hcd.0: USB Host+Gadget Emulator, driver 02 May
2005
[ 105.826249] dummy_hcd dummy_hcd.0: Dummy host controller
[ 105.826253] dummy_hcd dummy_hcd.0: new USB bus registered, assigned bus
number 9
[ 105.826320] usb usb9: New USB device found, idVendor=1d6b, idProduct=0002,
bcdDevice= 5.10
[ 105.826322] usb usb9: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 105.826324] usb usb9: Product: Dummy host controller
[ 105.826326] usb usb9: Manufacturer: Linux 5.10.9-custom dummy_hcd
[ 105.826327] usb usb9: SerialNumber: dummy_hcd.0
[ 105.826495] hub 9-0:1.0: USB hub found
[ 105.826504] hub 9-0:1.0: 1 port detected
dmesg on "sudo modprobe g_mass_storage file=usb.img stall=0 removable=y
iSerialNumber=123456789" Linux debian 5.10.9-custom #1 SMP Sat Jan 23 11:38:18
CET 2021 x86_64 GNU/Linux:
[ 155.275150] Mass Storage Function, version: 2009/09/11
[ 155.275155] LUN: removable file: (no medium)
[ 155.275210] LUN: removable file: usb.img
[ 155.275211] Number of LUNs=1
[ 155.275280] g_mass_storage gadget: Mass Storage Gadget, version: 2009/09/11
[ 155.275283] g_mass_storage gadget: g_mass_storage ready
[ 156.294800] usb usb9-port1: Cannot enable. Maybe the USB cable is bad?
[ 157.198799] usb usb9-port1: Cannot enable. Maybe the USB cable is bad?
[ 157.198820] usb usb9-port1: attempt power cycle
[ 158.426829] usb usb9-port1: Cannot enable. Maybe the USB cable is bad?
[ 159.334804] usb usb9-port1: Cannot enable. Maybe the USB cable is bad?
[ 159.334825] usb usb9-port1: unable to enumerate USB device
dmesg on "sudo modprobe dummy_hcd" Linux debian 5.10.4-custom #1 SMP Fri Jan 8
14:47:53 CET 2021 x86_64 GNU/Linux:
[ 95.185751] dummy_hcd dummy_hcd.0: USB Host+Gadget Emulator, driver 02 May
2005
[ 95.185758] dummy_hcd dummy_hcd.0: Dummy host controller
[ 95.185762] dummy_hcd dummy_hcd.0: new USB bus registered, assigned bus
number 9
[ 95.185828] usb usb9: New USB device found, idVendor=1d6b, idProduct=0002,
bcdDevice= 5.10
[ 95.185830] usb usb9: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 95.185832] usb usb9: Product: Dummy host controller
[ 95.185834] usb usb9: Manufacturer: Linux 5.10.4-custom dummy_hcd
[ 95.185836] usb usb9: SerialNumber: dummy_hcd.0
[ 95.186029] hub 9-0:1.0: USB hub found
[ 95.186040] hub 9-0:1.0: 1 port detected
dmesg on "sudo modprobe g_mass_storage file=usb.img stall=0 removable=y
iSerialNumber=123456789" Linux debian 5.10.4-custom #1 SMP Fri Jan 8 14:47:53
CET 2021 x86_64 GNU/Linux:
[ 217.210139] Mass Storage Function, version: 2009/09/11
[ 217.210144] LUN: removable file: (no medium)
[ 217.210194] LUN: removable file: usb.img
[ 217.210195] Number of LUNs=1
[ 217.210290] g_mass_storage gadget: Mass Storage Gadget, version: 2009/09/11
[ 217.210292] g_mass_storage gadget: g_mass_storage ready
[ 217.443044] usb 9-1: new high-speed USB device number 2 using dummy_hcd
[ 217.671049] usb 9-1: New USB device found, idVendor=0525, idProduct=a4a5,
bcdDevice= 5.10 [ 217.671053] usb 9-1: New USB device strings: Mfr=3,
Product=4, SerialNumber=5
[ 217.671055] usb 9-1: Product: Mass Storage Gadget
[ 217.671057] usb 9-1: Manufacturer: Linux 5.10.4-custom with dummy_udc
[ 217.671059] usb 9-1: SerialNumber: 123456789
[ 217.695087] usb-storage 9-1:1.0: USB Mass Storage device detected
[ 217.695224] usb-storage 9-1:1.0: Quirks match for vid 0525 pid a4a5: 10000
[ 217.695274] scsi host5: usb-storage 9-1:1.0
[ 218.763071] scsi 5:0:0:0: Direct-Access Linux File-Stor Gadget 0510
PQ: 0 ANSI: 2
[ 218.763367] sd 5:0:0:0: Attached scsi generic sg10 type 0
[ 218.803065] sd 5:0:0:0: Power-on or device reset occurred
[ 218.843104] sd 5:0:0:0: [sdk] 32768 512-byte logical blocks: (16.8 MB/16.0
MiB)
[ 218.867098] sd 5:0:0:0: [sdk] Write Protect is off
[ 218.867102] sd 5:0:0:0: [sdk] Mode Sense: 0f 00 00 00
[ 218.891101] sd 5:0:0:0: [sdk] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 218.991079] sdk: sdk1
[ 219.159063] sd 5:0:0:0: [sdk] Attached SCSI removable disk
Thanks and best regards
-- Package-specific info:
** Kernel log: boot messages should be attached
** Model information
sys_vendor: Acer
product_name: Aspire M5802/M3802
product_version:
chassis_vendor: Acer
chassis_version:
bios_vendor: American Megatrends Inc.
bios_version: P01-A1
board_vendor: Acer
board_name: EG43M
board_version:
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 4 Series Chipset DRAM Controller [8086:2e20] (rev 03)
Subsystem: Acer Incorporated [ALI] 4 Series Chipset DRAM Controller [1025:024c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation 4 Series Chipset PCI Express Root Port [8086:2e21] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 24
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff [size=4K]
Memory behind bridge: fd000000-feafffff [size=27M]
Prefetchable memory behind bridge: 00000000ce000000-00000000dfffffff [size=288M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:19.0 Ethernet controller [0200]: Intel Corporation 82567V-2 Gigabit Network Connection [8086:10ce]
Subsystem: Acer Incorporated [ALI] 82567V-2 Gigabit Network Connection [1025:024d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 27
Region 0: Memory at fcfe0000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at fcfdf000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at cc00 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
Kernel modules: e1000e
00:1a.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 [8086:3a37] (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] 82801JI (ICH10 Family) USB UHCI Controller [1025:024c]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at c880 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1a.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 [8086:3a38] (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] 82801JI (ICH10 Family) USB UHCI Controller [1025:024c]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at c800 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1a.2 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 [8086:3a39] (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] 82801JI (ICH10 Family) USB UHCI Controller [1025:024c]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 4: I/O ports at c480 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 [8086:3a3c] (prog-if 20 [EHCI])
Subsystem: Acer Incorporated [ALI] 82801JI (ICH10 Family) USB2 EHCI Controller [1025:024c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fcfdec00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1b.0 Audio device [0403]: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller [8086:3a3e]
Subsystem: Acer Incorporated [ALI] 82801JI (ICH10 Family) HD Audio Controller [1025:024c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at fcfd8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 [8086:3a40] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 25
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00001000-00001fff [size=4K]
Memory behind bridge: c0000000-c01fffff [size=2M]
Prefetchable memory behind bridge: 00000000c0200000-00000000c03fffff [size=2M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2 [8086:3a42] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 26
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000e000-0000efff [size=4K]
Memory behind bridge: feb00000-febfffff [size=1M]
Prefetchable memory behind bridge: 00000000c0400000-00000000c05fffff [size=2M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 [8086:3a34] (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] 82801JI (ICH10 Family) USB UHCI Controller [1025:024c]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at c400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 [8086:3a35] (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] 82801JI (ICH10 Family) USB UHCI Controller [1025:024c]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at c080 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 [8086:3a36] (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] 82801JI (ICH10 Family) USB UHCI Controller [1025:024c]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at c000 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 [8086:3a3a] (prog-if 20 [EHCI])
Subsystem: Acer Incorporated [ALI] 82801JI (ICH10 Family) USB2 EHCI Controller [1025:024c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fcfde800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 90) (prog-if 01 [Subtractive decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
I/O behind bridge: [disabled]
Memory behind bridge: [disabled]
Prefetchable memory behind bridge: [disabled]
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIB (ICH10) LPC Interface Controller [8086:3a18]
Subsystem: Acer Incorporated [ALI] 82801JIB (ICH10) LPC Interface Controller [1025:024c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 [8086:3a20] (prog-if 8f [PCI native mode controller, supports both channels switched to ISA compatibility mode, supports bus mastering])
Subsystem: Acer Incorporated [ALI] 82801JI (ICH10 Family) 4 port SATA IDE Controller [1025:024c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at bc00 [size=8]
Region 1: I/O ports at b880 [size=4]
Region 2: I/O ports at b800 [size=8]
Region 3: I/O ports at b480 [size=4]
Region 4: I/O ports at b400 [size=16]
Region 5: I/O ports at b080 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ata_piix, ata_generic
00:1f.3 SMBus [0c05]: Intel Corporation 82801JI (ICH10 Family) SMBus Controller [8086:3a30]
Subsystem: Acer Incorporated [ALI] 82801JI (ICH10 Family) SMBus Controller [1025:024c]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fcfde400 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0400 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
00:1f.5 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 [8086:3a26] (prog-if 85 [PCI native mode-only controller, supports bus mastering])
Subsystem: Acer Incorporated [ALI] 82801JI (ICH10 Family) 2 port SATA IDE Controller [1025:024c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at ac00 [size=8]
Region 1: I/O ports at a880 [size=4]
Region 2: I/O ports at a800 [size=8]
Region 3: I/O ports at a480 [size=4]
Region 4: I/O ports at a400 [size=16]
Region 5: I/O ports at a080 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ata_piix, ata_generic
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GT216 [GeForce GT 220] [10de:0a20] (rev a2) (prog-if 00 [VGA controller])
Subsystem: PC Partner Limited / Sapphire Technology GT216 [GeForce GT 220] [174b:2160]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 28
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at ce000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at dc00 [size=128]
Expansion ROM at 000c0000 [virtual] [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nvidia
Kernel modules: nvidia
01:00.1 Audio device [0403]: NVIDIA Corporation GT216 HDMI Audio Controller [10de:0be2] (rev a1)
Subsystem: PC Partner Limited / Sapphire Technology GT216 HDMI Audio Controller [174b:2160]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fea7c000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
03:00.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6315 Series Firewire Controller [1106:3403] (prog-if 10 [OHCI])
Subsystem: Acer Incorporated [ALI] VT6315 Series Firewire Controller [1025:024d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at febff800 (64-bit, non-prefetchable) [size=2K]
Region 2: I/O ports at e800 [size=256]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
Kernel modules: firewire_ohci
** USB devices:
Bus 009 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 004: ID 0a48:4001 I/O Interconnect IOI Smart Reader
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 002: ID 0e8f:2519 GreenAsia Inc.
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 002: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 148f:3572 Ralink Technology, Corp. RT3572 Wireless Adapter
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: bullseye/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 5.10.9-custom (SMP w/4 CPU threads)
Kernel taint flags: TAINT_PROPRIETARY_MODULE, TAINT_OOT_MODULE, TAINT_UNSIGNED_MODULE
Locale: LANG=it_IT.UTF-8, LC_CTYPE=it_IT.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-5.10.0-2-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.139
ii kmod 28-1
ii linux-base 4.6
Versions of packages linux-image-5.10.0-2-amd64 recommends:
ii apparmor 2.13.6-7
ii firmware-linux-free 20200122-1
Versions of packages linux-image-5.10.0-2-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.04-12
pn linux-doc-5.10 <none>
Versions of packages linux-image-5.10.0-2-amd64 is related to:
pn firmware-amd-graphics <none>
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
ii firmware-misc-nonfree 20201218-2
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
ii firmware-realtek 20201218-2
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
--- End Message ---