--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: networking CRASHES when using WAKEONLAN
- From: Thomas Schmidt <qwer@vienna.at>
- Date: Fri, 03 Jul 2015 11:05:23 +0200
- Message-id: <20150703090518.9052.81871.reportbug@9398>
Package: src:linux
Version: 4.0.5-1
Severity: important
Dear Maintainer,
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation?
* What exactly did you do (or not do) that was effective (or
ineffective)?
* What was the outcome of this action?
* What outcome did you expect instead?
*** End of the template - remove these template lines ***
-- Package-specific info:
** Version:
Linux version 4.0.0-2-686-pae (debian-kernel@lists.debian.org) (gcc version 4.9.2 (Debian 4.9.2-21) ) #1 SMP Debian 4.0.5-1 (2015-06-16)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.0.0-2-686-pae root=UUID=51052b81-aa31-419e-8bb0-8a6ca7f0b466 ro vga=0x11a quiet init=/lib/sysvinit/init
** Tainted: O (4096)
* Out-of-tree module has been loaded.
** Kernel log:
[ 60.348530] loop: module loaded
[ 188.613924] EXT4-fs (sda2): mounting ext3 file system using the ext4 subsystem
[ 188.634526] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 188.661022] EXT4-fs (sda6): mounting ext3 file system using the ext4 subsystem
[ 188.671978] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 188.685877] EXT4-fs (sda7): mounting ext3 file system using the ext4 subsystem
[ 188.698646] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 188.712491] EXT4-fs (sda8): mounting ext3 file system using the ext4 subsystem
[ 188.740159] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[ 188.754961] EXT4-fs (sdb1): mounting ext3 file system using the ext4 subsystem
[ 188.780119] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 188.802391] EXT4-fs (sdb10): mounting ext3 file system using the ext4 subsystem
[ 188.826338] EXT4-fs (sdb10): mounted filesystem with ordered data mode. Opts: (null)
[ 188.838396] EXT4-fs (sdb11): mounting ext3 file system using the ext4 subsystem
[ 188.864318] EXT4-fs (sdb11): mounted filesystem with ordered data mode. Opts: (null)
[ 188.881048] EXT4-fs (sdb2): mounting ext3 file system using the ext4 subsystem
[ 188.906975] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[ 188.907172] EXT4-fs (sdb5): mounting ext3 file system using the ext4 subsystem
[ 188.946552] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[ 188.946707] EXT4-fs (sdb6): mounting ext3 file system using the ext4 subsystem
[ 188.969909] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: (null)
[ 188.976159] EXT4-fs (sdb7): mounting ext3 file system using the ext4 subsystem
[ 188.997273] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: (null)
[ 188.997438] EXT4-fs (sdb8): mounting ext3 file system using the ext4 subsystem
[ 189.020222] EXT4-fs (sdb8): mounted filesystem with ordered data mode. Opts: (null)
[ 189.054952] EXT4-fs (sdb9): mounting ext3 file system using the ext4 subsystem
[ 189.149188] EXT4-fs (sdb9): mounted filesystem with ordered data mode. Opts: (null)
[ 189.845284] r8169 0000:03:00.0 eth0: link down
[ 189.845293] r8169 0000:03:00.0 eth0: link down
[ 189.845302] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 190.783678] RPC: Registered named UNIX socket transport module.
[ 190.783681] RPC: Registered udp transport module.
[ 190.783682] RPC: Registered tcp transport module.
[ 190.783684] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 190.827784] FS-Cache: Loaded
[ 190.885427] FS-Cache: Netfs 'nfs' registered for caching
[ 190.971992] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 192.185780] r8169 0000:03:00.0 eth0: link up
[ 192.185790] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 192.554266] statnetd uses obsolete (PF_INET,SOCK_PACKET)
[ 192.554285] device eth0 entered promiscuous mode
[ 193.595357] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 193.631830] NFSD: starting 90-second grace period (net c16c2300)
[ 209.292745] Process accounting resumed
[ 216.861249] systemd-logind[2854]: New seat seat0.
[ 216.895270] systemd-logind[2854]: Watching system buttons on /dev/input/event3 (Power Button)
[ 216.895370] systemd-logind[2854]: Watching system buttons on /dev/input/event4 (Video Bus)
[ 216.895462] systemd-logind[2854]: Watching system buttons on /dev/input/event2 (Power Button)
[ 216.895556] systemd-logind[2854]: Watching system buttons on /dev/input/event1 (Sleep Button)
[ 216.899414] systemd-logind[2854]: Failed to start user service: Unknown unit: user@1000.service
[ 216.902677] systemd-logind[2854]: New session 1 of user yx.
[ 247.743247] vboxdrv: Found 2 processor cores.
[ 247.744319] vboxdrv: fAsync=0 offMin=0x2c7 offMax=0xdc8
[ 247.744386] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 247.744388] vboxdrv: Successfully loaded version 4.3.28_Debian (interface 0x001a000a).
[ 248.395684] vboxpci: IOMMU not found (not compiled)
[ 363.991424] systemd-logind[2854]: New session 3 of user yx.
[ 390.112332] systemd-logind[2854]: Failed to start user service: Unknown unit: user@0.service
[ 390.115666] systemd-logind[2854]: New session 4 of user root.
[ 395.330817] Bluetooth: Core ver 2.20
[ 395.330835] NET: Registered protocol family 31
[ 395.330836] Bluetooth: HCI device and connection manager initialized
[ 395.330840] Bluetooth: HCI socket layer initialized
[ 395.330843] Bluetooth: L2CAP socket layer initialized
[ 395.330849] Bluetooth: SCO socket layer initialized
[ 395.390114] Netfilter messages via NETLINK v0.30.
[ 395.436562] device eth1 entered promiscuous mode
[ 413.821291] r8169 0000:03:00.0 eth0: link down
[ 413.821301] r8169 0000:03:00.0 eth0: link down
[ 413.821569] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 416.801815] r8169 0000:03:00.0 eth0: link up
[ 416.801825] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 441.770141] systemd-logind[2854]: New session 5 of user root.
[ 778.083724] device eth1 left promiscuous mode
[ 1069.033289] r8169 0000:03:00.0 eth0: link down
[ 1069.033315] r8169 0000:03:00.0 eth0: link down
[ 1069.033394] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1072.385133] r8169 0000:03:00.0 eth0: link up
[ 1072.385142] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 1172.769292] r8169 0000:03:00.0 eth0: link down
[ 1172.769319] r8169 0000:03:00.0 eth0: link down
[ 1172.769651] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1175.770277] r8169 0000:03:00.0 eth0: link up
[ 1175.770287] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 1437.013293] r8169 0000:03:00.0 eth0: link down
[ 1437.013315] r8169 0000:03:00.0 eth0: link down
[ 1437.013680] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1440.000117] r8169 0000:03:00.0 eth0: link up
[ 1440.000127] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 1473.825295] r8169 0000:03:00.0 eth0: link down
[ 1473.825301] r8169 0000:03:00.0 eth0: link down
[ 1473.825396] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1476.824530] r8169 0000:03:00.0 eth0: link up
[ 1476.824539] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 1520.960656] perf interrupt took too long (2508 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[ 1575.637291] r8169 0000:03:00.0 eth0: link down
[ 1575.637348] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1575.637559] r8169 0000:03:00.0 eth0: link down
[ 1577.986832] r8169 0000:03:00.0 eth0: link up
[ 1577.986842] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
** Model information
not available
** Loaded modules:
nfnetlink_queue
nfnetlink_log
nfnetlink
bluetooth
rfkill
pci_stub
vboxpci(O)
vboxnetadp(O)
vboxnetflt(O)
vboxdrv(O)
binfmt_misc
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
grace
fscache
sunrpc
loop
parport_pc
ppdev
lp
parport
hid_a4tech
iTCO_wdt
iTCO_vendor_support
coretemp
i2c_i801
pcspkr
evdev
serio_raw
lpc_ich
sg
mfd_core
snd_hda_codec_realtek
snd_hda_codec_generic
i915
video
rng_core
drm_kms_helper
8250_fintek
button
drm
acpi_cpufreq
shpchp
snd_hda_intel
snd_hda_controller
snd_hda_codec
snd_hwdep
snd_pcm
snd_timer
snd
soundcore
i2c_algo_bit
processor
thermal_sys
ext4
crc16
mbcache
jbd2
md_mod
usbhid
hid
sr_mod
cdrom
sd_mod
ata_generic
ata_piix
libata
scsi_mod
via_rhine
ehci_pci
r8169
mii
uhci_hcd
ehci_hcd
usbcore
usb_common
** Network interface configuration:
auto lo
iface lo inet loopback
allow-hotplug eth0
iface eth0 inet static
address 10.0.1.13
netmask 255.255.255.224
network 10.0.1.0
broadcast 10.0.1.31
gateway 10.0.0.3
hardware ether 00:1c:c0:1d:e1:e0
dns-nameservers 10.0.1.13 10.0.0.3
dns-search at
allow-hotplug eth1
iface eth1 inet static
address 10.0.0.3
netmask 255.255.255.0
network 10.0.0.0
broadcast 10.0.0.255
gateway 10.0.0.138
hardware ether 00:11:95:80:93:98
dns-nameservers 194.183.128.35 194.183.128.36
dns-searche at
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether 00:1c:c0:1d:e1:e0 brd ff:ff:ff:ff:ff:ff
inet 10.0.1.13/27 brd 10.0.1.31 scope global eth0
valid_lft forever preferred_lft forever
inet6 fe80::21c:c0ff:fe1d:e1e0/64 scope link
valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN group default qlen 1000
link/ether 00:11:95:80:93:98 brd ff:ff:ff:ff:ff:ff
inet 10.0.0.3/24 brd 10.0.0.255 scope global eth1
valid_lft forever preferred_lft forever
inet6 fe80::211:95ff:fe80:9398/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 9861179 27651 0 0 0 0 0 0 9861179 27651 0 0 0 0 0 0
eth0: 45378 404 0 0 0 0 0 0 570712 2918 0 0 0 0 0 0
eth1: 26003198 48111 0 0 0 0 0 0 22834634 51946 0 0 0 0 0 0
*** Protocol statistics:
Ip:
74319 total packets received
20 with invalid addresses
0 forwarded
0 incoming packets discarded
74233 incoming packets delivered
77806 requests sent out
4065 outgoing packets dropped
17713 dropped because of missing route
Icmp:
9922 ICMP messages received
5 input ICMP message failed.
InCsumErrors: 5
ICMP input histogram:
destination unreachable: 9911
echo replies: 6
9880 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 9868
echo request: 12
IcmpMsg:
InType0: 6
InType3: 9911
OutType3: 9868
OutType8: 12
Tcp:
559 active connections openings
492 passive connection openings
102 failed connection attempts
8 connection resets received
20 connections established
38074 segments received
37749 segments send out
501 segments retransmited
0 bad segments received.
2203 resets sent
Udp:
16781 packets received
9868 packets to unknown port received.
0 packet receive errors
29809 packets sent
IgnoredMulti: 77
UdpLite:
TcpExt:
2 resets received for embryonic SYN_RECV sockets
129 TCP sockets finished time wait in fast timer
1961 delayed acks sent
Quick ack mode was activated 6 times
7 SYNs to LISTEN sockets dropped
490 packets directly queued to recvmsg prequeue.
273 bytes directly in process context from backlog
419012 bytes directly received in process context from prequeue
13503 packet headers predicted
370 packets header predicted and directly queued to user
6287 acknowledgments not containing data payload received
7380 predicted acknowledgments
78 times recovered from packet loss by selective acknowledgements
2 congestion windows recovered without slow start by DSACK
9 congestion windows recovered without slow start after partial ack
TCPLostRetransmit: 24
1 timeouts after SACK recovery
1 timeouts in loss state
181 fast retransmits
10 forward retransmits
3 retransmits in slow start
64 other TCP timeouts
TCPLossProbes: 160
TCPLossProbeRecovery: 29
3 SACK retransmits failed
6 DSACKs sent for old packets
87 DSACKs received
1 DSACKs for out of order packets received
4 connections reset due to unexpected data
3 connections reset due to early user close
4 connections aborted due to timeout
TCPDSACKIgnoredNoUndo: 48
TCPSpuriousRTOs: 2
TCPSackShiftFallback: 765
TCPRcvCoalesce: 738
TCPOFOQueue: 765
TCPChallengeACK: 1
TCPAutoCorking: 2097
TCPSynRetrans: 115
TCPOrigDataSent: 18874
TCPHystartDelayDetect: 1
TCPHystartDelayCwnd: 29
IpExt:
InMcastPkts: 2620
OutMcastPkts: 2643
InBcastPkts: 481
OutBcastPkts: 242
InOctets: 35415134
OutOctets: 31851738
InMcastOctets: 461427
OutMcastOctets: 445308
InBcastOctets: 72422
OutBcastOctets: 32739
InNoECTPkts: 73759
InECT1Pkts: 1
InECT0Pkts: 6
InCEPkts: 553
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller [8086:29c0] (rev 02)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0b <?>
Kernel driver in use: agpgart-intel
00:01.0 PCI bridge [0604]: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port [8086:29c1] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [88] Subsystem: Intel Corporation Device [8086:0000]
Capabilities: [80] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 41a1
Capabilities: [a0] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <1us, L1 <8us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #0, PowerLimit 0.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd On, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending+ InProgress-
Capabilities: [140 v1] Root Complex Link
Desc: PortNumber=02 ComponentID=01 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=01 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000fed19000
Kernel driver in use: pcieport
00:02.0 VGA compatible controller [0300]: Intel Corporation 82G33/G31 Express Integrated Graphics Controller [8086:29c2] (rev 02) (prog-if 00 [VGA controller])
Subsystem: Intel Corporation 82G33/G31 Express Integrated Graphics Controller [8086:29c2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 29
Region 0: Memory at feb00000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at d140 [size=8]
Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at fe800000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 4182
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: i915
00:1b.0 Audio device [0403]: Intel Corporation NM10/ICH7 Family High Definition Audio Controller [8086:27d8] (rev 01)
Subsystem: Intel Corporation Device [8086:d608]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 28
Region 0: Memory at feb80000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0300c Data: 4172
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable- ID=0 ArbSelect=Fixed TC/VC=00
Status: NegoPending- InProgress-
Capabilities: [130 v1] Root Complex Link
Desc: PortNumber=0f ComponentID=02 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000fed1c000
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: e4000000-e41fffff
Prefetchable memory behind bridge: 0000000130000000-00000001301fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <1us, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #1, PowerLimit 10.000W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt+ HPIrq+ LinkChg+
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 41b1
Capabilities: [90] Subsystem: Intel Corporation NM10/ICH7 Family PCI Express Port 1 [8086:27d0]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable- ID=0 ArbSelect=Fixed TC/VC=00
Status: NegoPending- InProgress-
Capabilities: [180 v1] Root Complex Link
Desc: PortNumber=01 ComponentID=02 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000fed1c001
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 2 [8086:27d2] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fea00000-feafffff
Prefetchable memory behind bridge: 0000000130200000-00000001303fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <256ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #2, PowerLimit 10.000W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt+ HPIrq+ LinkChg+
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 41d1
Capabilities: [90] Subsystem: Intel Corporation NM10/ICH7 Family PCI Express Port 2 [8086:27d2]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable- ID=1 ArbSelect=Fixed TC/VC=00
Status: NegoPending- InProgress-
Capabilities: [180 v1] Root Complex Link
Desc: PortNumber=02 ComponentID=02 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000fed1c001
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI])
Subsystem: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 [8086:27c8]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at d080 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 [8086:27c9] (rev 01) (prog-if 00 [UHCI])
Subsystem: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 [8086:27c9]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at d060 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 [8086:27ca] (rev 01) (prog-if 00 [UHCI])
Subsystem: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 [8086:27ca]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at d040 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 [8086:27cb] (rev 01) (prog-if 00 [UHCI])
Subsystem: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 [8086:27cb]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at d020 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI])
Subsystem: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller [8086:27cc]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at feb84000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fe900000-fe9fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Subsystem: Device [0000:0000]
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01)
Subsystem: Intel Corporation DeskTop Board D945GTP [8086:544e]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
Kernel driver in use: lpc_ich
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374
Region 4: I/O ports at d0f0 [size=16]
Kernel driver in use: ata_piix
00:1f.2 IDE interface [0101]: Intel Corporation NM10/ICH7 Family SATA Controller [IDE mode] [8086:27c0] (rev 01) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Intel Corporation NM10/ICH7 Family SATA Controller [IDE mode] [8086:27c0]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at d0e0 [size=8]
Region 1: I/O ports at d0d0 [size=4]
Region 2: I/O ports at d0c0 [size=8]
Region 3: I/O ports at d0b0 [size=4]
Region 4: I/O ports at d0a0 [size=16]
Capabilities: [70] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation NM10/ICH7 Family SMBus Controller [8086:27da] (rev 01)
Subsystem: Intel Corporation Device [8086:d608]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at d000 [size=32]
Kernel driver in use: i801_smbus
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 01)
Subsystem: Intel Corporation Device [8086:d608]
Physical Slot: 2
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 27
Region 0: I/O ports at c000 [size=256]
Region 2: Memory at fea20000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at fea00000 [disabled] [size=128K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
Capabilities: [48] Vital Product Data
Unknown small resource type 05, will not decode more.
Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
Address: 00000000fee0200c Data: 4152
Capabilities: [60] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 1024 bytes, PhantFunc 0, Latency L0s <128ns, L1 unlimited
ExtTag+ AttnBtn+ AttnInd+ PwrInd+ RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Exit Latency L0s unlimited, L1 unlimited
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [84] Vendor Specific Information: Len=4c <?>
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [12c v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [148 v1] Device Serial Number 00-00-00-00-00-ec-81-68
Capabilities: [154 v1] Power Budgeting <?>
Kernel driver in use: r8169
04:06.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6105/VT6106S [Rhine-III] [1106:3106] (rev 86)
Subsystem: D-Link System Inc DFE-530TX rev C [1186:1403]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (750ns min, 2000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at b000 [size=256]
Region 1: Memory at fe910000 (32-bit, non-prefetchable) [size=256]
Expansion ROM at fe900000 [disabled] [size=64K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: via-rhine
** USB devices:
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 09da:000a A4 Tech Co., Ltd Optical Mouse Opto 510D
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: stretch/sid
APT prefers testing
APT policy: (650, 'testing'), (600, 'unstable'), (500, 'oldstable-updates'), (500, 'oldstable')
Architecture: i386 (i686)
Kernel: Linux 4.0.0-2-686-pae (SMP w/2 CPU cores)
Locale: LANG=de_AT.UTF-8, LC_CTYPE=de_AT.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: unable to detect
Versions of packages linux-image-4.0.0-2-686-pae depends on:
ii debconf [debconf-2.0] 1.5.56
ii initramfs-tools [linux-initramfs-tool] 0.120
ii kmod 20-1
ii linux-base 3.5
Versions of packages linux-image-4.0.0-2-686-pae recommends:
ii firmware-linux-free 3.3
ii irqbalance 1.0.6-3
ii libc6-i686 2.19-18
Versions of packages linux-image-4.0.0-2-686-pae suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02~beta2-26
pn linux-doc-4.0 <none>
Versions of packages linux-image-4.0.0-2-686-pae is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-4.0.0-2-686-pae/postinst/mips-initrd-4.0.0-2-686-pae:
linux-image-4.0.0-2-686-pae/postinst/depmod-error-initrd-4.0.0-2-686-pae: false
linux-image-4.0.0-2-686-pae/prerm/removing-running-kernel-4.0.0-2-686-pae: true
This might be to much, sorry :-(
--- End Message ---