Bug#991941: attaching dmesg and lspci output
I'm attaching the dmesg and lspci output for the case they are useful.
Kind regards
--
Laura Arjona Reina
https://wiki.debian.org/LauraArjona
Sent with K-9 mail
[ 0.000000] Linux version 5.10.0-8-amd64 (debian-kernel@lists.debian.org) (gcc-10 (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Debian 5.10.46-3 (2021-07-28)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.10.0-8-amd64 root=UUID=02117186-1520-493e-b434-e6e4c856a515 ro quiet
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b9aa1fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b9aa2000-0x00000000b9aa8fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000b9aa9000-0x00000000ba2d7fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ba2d8000-0x00000000ba4f3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ba4f4000-0x00000000ca8befff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ca8bf000-0x00000000ca956fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ca957000-0x00000000ca993fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ca994000-0x00000000caa56fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000caa57000-0x00000000caffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cafff000-0x00000000caffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cb800000-0x00000000cf9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. H81M-S1/H81M-S1, BIOS FH 08/10/2015
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3392.039 MHz processor
[ 0.000461] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000464] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000469] last_pfn = 0x12f600 max_arch_pfn = 0x400000000
[ 0.000472] MTRR default type: uncachable
[ 0.000473] MTRR fixed ranges enabled:
[ 0.000474] 00000-9FFFF write-back
[ 0.000475] A0000-BFFFF uncachable
[ 0.000475] C0000-CFFFF write-protect
[ 0.000476] D0000-E7FFF uncachable
[ 0.000477] E8000-FFFFF write-protect
[ 0.000477] MTRR variable ranges enabled:
[ 0.000478] 0 base 0000000000 mask 7F00000000 write-back
[ 0.000479] 1 base 0100000000 mask 7FE0000000 write-back
[ 0.000480] 2 base 0120000000 mask 7FF0000000 write-back
[ 0.000481] 3 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000481] 4 base 00D0000000 mask 7FF0000000 uncachable
[ 0.000482] 5 base 00CC000000 mask 7FFC000000 uncachable
[ 0.000483] 6 base 00CB800000 mask 7FFF800000 uncachable
[ 0.000483] 7 base 012F800000 mask 7FFF800000 uncachable
[ 0.000484] 8 base 012F600000 mask 7FFFE00000 uncachable
[ 0.000485] 9 disabled
[ 0.000746] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000947] e820: update [mem 0xcb800000-0xffffffff] usable ==> reserved
[ 0.000952] last_pfn = 0xcb000 max_arch_pfn = 0x400000000
[ 0.006871] found SMP MP-table at [mem 0x000fd6c0-0x000fd6cf]
[ 0.013870] Using GB pages for direct mapping
[ 0.014409] RAMDISK: [mem 0x33041000-0x35817fff]
[ 0.014411] ACPI: Early table checksum verification disabled
[ 0.014414] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[ 0.014417] ACPI: XSDT 0x00000000CAA24078 00006C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.014421] ACPI: FACP 0x00000000CAA30620 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.014425] ACPI: DSDT 0x00000000CAA24178 00C4A7 (v02 ALASKA A M I 00000088 INTL 20091112)
[ 0.014427] ACPI: FACS 0x00000000CAA55080 000040
[ 0.014429] ACPI: APIC 0x00000000CAA30730 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.014431] ACPI: FPDT 0x00000000CAA307A8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.014433] ACPI: SSDT 0x00000000CAA307F0 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711)
[ 0.014435] ACPI: SSDT 0x00000000CAA30D30 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711)
[ 0.014438] ACPI: MCFG 0x00000000CAA31808 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.014440] ACPI: HPET 0x00000000CAA31848 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.014442] ACPI: SSDT 0x00000000CAA31880 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
[ 0.014444] ACPI: SSDT 0x00000000CAA31BF0 0034E1 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
[ 0.014447] ACPI: Reserving FACP table memory at [mem 0xcaa30620-0xcaa3072b]
[ 0.014447] ACPI: Reserving DSDT table memory at [mem 0xcaa24178-0xcaa3061e]
[ 0.014448] ACPI: Reserving FACS table memory at [mem 0xcaa55080-0xcaa550bf]
[ 0.014449] ACPI: Reserving APIC table memory at [mem 0xcaa30730-0xcaa307a1]
[ 0.014449] ACPI: Reserving FPDT table memory at [mem 0xcaa307a8-0xcaa307eb]
[ 0.014450] ACPI: Reserving SSDT table memory at [mem 0xcaa307f0-0xcaa30d28]
[ 0.014451] ACPI: Reserving SSDT table memory at [mem 0xcaa30d30-0xcaa31807]
[ 0.014451] ACPI: Reserving MCFG table memory at [mem 0xcaa31808-0xcaa31843]
[ 0.014452] ACPI: Reserving HPET table memory at [mem 0xcaa31848-0xcaa3187f]
[ 0.014453] ACPI: Reserving SSDT table memory at [mem 0xcaa31880-0xcaa31bec]
[ 0.014453] ACPI: Reserving SSDT table memory at [mem 0xcaa31bf0-0xcaa350d0]
[ 0.014461] ACPI: Local APIC address 0xfee00000
[ 0.014502] No NUMA configuration found
[ 0.014503] Faking a node at [mem 0x0000000000000000-0x000000012f5fffff]
[ 0.014512] NODE_DATA(0) allocated [mem 0x12f5d4000-0x12f5fdfff]
[ 0.014751] Zone ranges:
[ 0.014752] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.014753] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.014754] Normal [mem 0x0000000100000000-0x000000012f5fffff]
[ 0.014755] Device empty
[ 0.014756] Movable zone start for each node
[ 0.014759] Early memory node ranges
[ 0.014759] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.014760] node 0: [mem 0x0000000000100000-0x00000000b9aa1fff]
[ 0.014761] node 0: [mem 0x00000000b9aa9000-0x00000000ba2d7fff]
[ 0.014762] node 0: [mem 0x00000000ba4f4000-0x00000000ca8befff]
[ 0.014762] node 0: [mem 0x00000000ca957000-0x00000000ca993fff]
[ 0.014763] node 0: [mem 0x00000000cafff000-0x00000000caffffff]
[ 0.014763] node 0: [mem 0x0000000100000000-0x000000012f5fffff]
[ 0.014765] Initmem setup node 0 [mem 0x0000000000001000-0x000000012f5fffff]
[ 0.014766] On node 0 totalpages: 1023094
[ 0.014767] DMA zone: 64 pages used for memmap
[ 0.014768] DMA zone: 21 pages reserved
[ 0.014768] DMA zone: 3996 pages, LIFO batch:0
[ 0.015146] DMA zone: 28772 pages in unavailable ranges
[ 0.015147] DMA32 zone: 12892 pages used for memmap
[ 0.015148] DMA32 zone: 825050 pages, LIFO batch:63
[ 0.025412] DMA32 zone: 22822 pages in unavailable ranges
[ 0.025414] Normal zone: 3032 pages used for memmap
[ 0.025415] Normal zone: 194048 pages, LIFO batch:63
[ 0.025853] Normal zone: 2560 pages in unavailable ranges
[ 0.025870] Reserving Intel graphics memory at [mem 0xcba00000-0xcf9fffff]
[ 0.025936] ACPI: PM-Timer IO Port: 0x1808
[ 0.025938] ACPI: Local APIC address 0xfee00000
[ 0.025943] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.025952] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.025954] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.025955] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.025956] ACPI: IRQ0 used by override.
[ 0.025957] ACPI: IRQ9 used by override.
[ 0.025958] Using ACPI (MADT) for SMP configuration information
[ 0.025959] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.025963] [Firmware Bug]: TSC_DEADLINE disabled due to Errata; please update microcode to version: 0x22 (or later)
[ 0.025965] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.025980] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.025982] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.025982] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.025983] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.025983] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.025985] PM: hibernation: Registered nosave memory: [mem 0xb9aa2000-0xb9aa8fff]
[ 0.025986] PM: hibernation: Registered nosave memory: [mem 0xba2d8000-0xba4f3fff]
[ 0.025987] PM: hibernation: Registered nosave memory: [mem 0xca8bf000-0xca956fff]
[ 0.025988] PM: hibernation: Registered nosave memory: [mem 0xca994000-0xcaa56fff]
[ 0.025989] PM: hibernation: Registered nosave memory: [mem 0xcaa57000-0xcaffefff]
[ 0.025990] PM: hibernation: Registered nosave memory: [mem 0xcb000000-0xcb7fffff]
[ 0.025991] PM: hibernation: Registered nosave memory: [mem 0xcb800000-0xcf9fffff]
[ 0.025991] PM: hibernation: Registered nosave memory: [mem 0xcfa00000-0xf7ffffff]
[ 0.025992] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.025992] PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.025993] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.025993] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.025994] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.025994] PM: hibernation: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.025995] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.025996] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.025996] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.025997] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.025997] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.025999] [mem 0xcfa00000-0xf7ffffff] available for PCI devices
[ 0.025999] Booting paravirtualized kernel on bare hardware
[ 0.026002] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.029125] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.029419] percpu: Embedded 54 pages/cpu s183960 r8192 d29032 u524288
[ 0.029425] pcpu-alloc: s183960 r8192 d29032 u524288 alloc=1*2097152
[ 0.029426] pcpu-alloc: [0] 0 1 2 3
[ 0.029451] Built 1 zonelists, mobility grouping on. Total pages: 1007085
[ 0.029451] Policy zone: Normal
[ 0.029453] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.10.0-8-amd64 root=UUID=02117186-1520-493e-b434-e6e4c856a515 ro quiet
[ 0.029826] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.030001] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.030034] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.048192] Memory: 3305712K/4092376K available (12295K kernel code, 2544K rwdata, 7552K rodata, 2396K init, 3700K bss, 214460K reserved, 0K cma-reserved)
[ 0.048200] random: get_random_u64 called from __kmem_cache_create+0x2a/0x540 with crng_init=0
[ 0.048294] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.048304] Kernel/User page tables isolation: enabled
[ 0.048320] ftrace: allocating 36395 entries in 143 pages
[ 0.057870] ftrace: allocated 143 pages with 5 groups
[ 0.057977] rcu: Hierarchical RCU implementation.
[ 0.057979] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.057980] Rude variant of Tasks RCU enabled.
[ 0.057980] Tracing variant of Tasks RCU enabled.
[ 0.057981] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.057981] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.060690] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
[ 0.060898] random: crng done (trusting CPU's manufacturer)
[ 0.060914] spurious 8259A interrupt: IRQ7.
[ 0.064134] Console: colour VGA+ 80x25
[ 0.064182] printk: console [tty0] enabled
[ 0.064193] ACPI: Core revision 20200925
[ 0.064273] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.064283] APIC: Switch to symmetric I/O mode setup
[ 0.064599] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.084284] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x30e4ee43e06, max_idle_ns: 440795230994 ns
[ 0.084287] Calibrating delay loop (skipped), value calculated using timer frequency.. 6784.07 BogoMIPS (lpj=13568156)
[ 0.084290] pid_max: default: 32768 minimum: 301
[ 0.084308] LSM: Security Framework initializing
[ 0.084315] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.084337] AppArmor: AppArmor initialized
[ 0.084338] TOMOYO Linux initialized
[ 0.084359] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.084370] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.084575] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.084584] process: using mwait in idle threads
[ 0.084586] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.084587] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.084589] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.084590] Spectre V2 : Mitigation: Full generic retpoline
[ 0.084590] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.084591] Speculative Store Bypass: Vulnerable
[ 0.084592] SRBDS: Vulnerable: No microcode
[ 0.084593] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.084682] Freeing SMP alternatives memory: 32K
[ 0.194124] smpboot: CPU0: Intel(R) Core(TM) i3-4130 CPU @ 3.40GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[ 0.194228] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.194250] ... version: 3
[ 0.194251] ... bit width: 48
[ 0.194251] ... generic registers: 4
[ 0.194252] ... value mask: 0000ffffffffffff
[ 0.194252] ... max period: 00007fffffffffff
[ 0.194252] ... fixed-purpose events: 3
[ 0.194253] ... event mask: 000000070000000f
[ 0.194335] rcu: Hierarchical SRCU implementation.
[ 0.194798] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.194841] smp: Bringing up secondary CPUs ...
[ 0.194902] x86: Booting SMP configuration:
[ 0.194903] .... node #0, CPUs: #1 #2
[ 0.195145] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.195145] #3
[ 0.195145] smp: Brought up 1 node, 4 CPUs
[ 0.195145] smpboot: Max logical packages: 1
[ 0.195145] smpboot: Total of 4 processors activated (27136.31 BogoMIPS)
[ 0.196384] node 0 deferred pages initialised in 4ms
[ 0.196822] devtmpfs: initialized
[ 0.196822] x86/mm: Memory block size: 128MB
[ 0.196822] PM: Registering ACPI NVS region [mem 0xb9aa2000-0xb9aa8fff] (28672 bytes)
[ 0.196822] PM: Registering ACPI NVS region [mem 0xca994000-0xcaa56fff] (798720 bytes)
[ 0.196822] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.196822] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.196822] pinctrl core: initialized pinctrl subsystem
[ 0.196822] NET: Registered protocol family 16
[ 0.196822] audit: initializing netlink subsys (disabled)
[ 0.196822] audit: type=2000 audit(1628241699.132:1): state=initialized audit_enabled=0 res=1
[ 0.196822] thermal_sys: Registered thermal governor 'fair_share'
[ 0.196822] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.196822] thermal_sys: Registered thermal governor 'step_wise'
[ 0.196822] thermal_sys: Registered thermal governor 'user_space'
[ 0.196822] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.196822] cpuidle: using governor ladder
[ 0.196822] cpuidle: using governor menu
[ 0.196822] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.196822] ACPI: bus type PCI registered
[ 0.196822] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.196822] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.196822] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.196822] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[ 0.196822] PCI: Using configuration type 1 for base access
[ 0.196822] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.197027] Kprobes globally optimized
[ 0.197031] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.197031] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.308535] ACPI: Added _OSI(Module Device)
[ 0.308535] ACPI: Added _OSI(Processor Device)
[ 0.308535] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.308535] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.308535] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.308535] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.308535] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.315369] ACPI: 5 ACPI AML tables successfully acquired and loaded
[ 0.316216] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.316777] ACPI: Dynamic OEM Table Load:
[ 0.316781] ACPI: SSDT 0xFFFF9CA86B369000 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
[ 0.317333] ACPI: Dynamic OEM Table Load:
[ 0.317337] ACPI: SSDT 0xFFFF9CA84098E800 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
[ 0.317915] ACPI: Dynamic OEM Table Load:
[ 0.317917] ACPI: SSDT 0xFFFF9CA86B3D2800 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
[ 0.318844] ACPI: Interpreter enabled
[ 0.318865] ACPI: (supports S0 S3 S4 S5)
[ 0.318865] ACPI: Using IOAPIC for interrupt routing
[ 0.318885] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.319057] ACPI: Enabled 7 GPEs in block 00 to 3F
[ 0.324606] ACPI: Power Resource [FN00] (off)
[ 0.324656] ACPI: Power Resource [FN01] (off)
[ 0.324701] ACPI: Power Resource [FN02] (off)
[ 0.324746] ACPI: Power Resource [FN03] (off)
[ 0.324791] ACPI: Power Resource [FN04] (off)
[ 0.325278] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.325281] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.325444] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
[ 0.325536] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR]
[ 0.325537] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.325794] PCI host bridge to bus 0000:00
[ 0.325796] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.325797] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.325798] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.325799] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.325800] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.325800] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.325801] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.325802] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.325803] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.325804] pci_bus 0000:00: root bus resource [mem 0xcfa00000-0xfeafffff window]
[ 0.325804] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.325813] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[ 0.325877] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[ 0.325906] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.326002] pci 0000:00:02.0: [8086:041e] type 00 class 0x030000
[ 0.326009] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
[ 0.326014] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.326017] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.326081] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[ 0.326087] pci 0000:00:03.0: reg 0x10: [mem 0xf7914000-0xf7917fff 64bit]
[ 0.326169] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[ 0.326183] pci 0000:00:14.0: reg 0x10: [mem 0xf7900000-0xf790ffff 64bit]
[ 0.326232] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.326290] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 0.326304] pci 0000:00:16.0: reg 0x10: [mem 0xf791e000-0xf791e00f 64bit]
[ 0.326357] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.326417] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[ 0.326430] pci 0000:00:1a.0: reg 0x10: [mem 0xf791c000-0xf791c3ff]
[ 0.326500] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.326563] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 0.326577] pci 0000:00:1b.0: reg 0x10: [mem 0xf7910000-0xf7913fff 64bit]
[ 0.326637] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.326698] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[ 0.326762] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.326859] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
[ 0.326923] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.327025] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[ 0.327038] pci 0000:00:1d.0: reg 0x10: [mem 0xf791b000-0xf791b3ff]
[ 0.327108] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.327173] pci 0000:00:1f.0: [8086:8c5c] type 00 class 0x060100
[ 0.327315] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
[ 0.327325] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.327330] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.327336] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.327341] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.327346] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.327352] pci 0000:00:1f.2: reg 0x24: [mem 0xf791a000-0xf791a7ff]
[ 0.327380] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.327433] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 0.327446] pci 0000:00:1f.3: reg 0x10: [mem 0xf7919000-0xf79190ff 64bit]
[ 0.327462] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.327554] pci 0000:01:00.0: [10de:0421] type 00 class 0x030000
[ 0.327563] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[ 0.327570] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.327578] pci 0000:01:00.0: reg 0x1c: [mem 0xf4000000-0xf5ffffff 64bit]
[ 0.327583] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.327588] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf701ffff pref]
[ 0.327676] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.327677] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.327679] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf70fffff]
[ 0.327681] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.327720] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.327783] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.327802] pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff]
[ 0.327827] pci 0000:03:00.0: reg 0x18: [mem 0xf7800000-0xf7800fff 64bit]
[ 0.327843] pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[ 0.327937] pci 0000:03:00.0: supports D1 D2
[ 0.327938] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.328046] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.328049] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
[ 0.328051] pci 0000:00:1c.2: bridge window [mem 0xf7800000-0xf78fffff]
[ 0.328054] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.328518] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.328553] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.328586] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.328619] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.328651] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.328684] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.328717] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.328750] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 10 11 12 14 15)
[ 0.329021] iommu: Default domain type: Translated
[ 0.329032] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none
[ 0.329032] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.329032] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.329032] pci 0000:00:02.0: vgaarb: no bridge control possible
[ 0.329032] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.329032] vgaarb: loaded
[ 0.329032] EDAC MC: Ver: 3.0.0
[ 0.329032] NetLabel: Initializing
[ 0.329032] NetLabel: domain hash size = 128
[ 0.329032] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.329032] NetLabel: unlabeled traffic allowed by default
[ 0.329032] PCI: Using ACPI for IRQ routing
[ 0.329612] PCI: pci_cache_line_size set to 64 bytes
[ 0.329642] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.329643] e820: reserve RAM buffer [mem 0xb9aa2000-0xbbffffff]
[ 0.329644] e820: reserve RAM buffer [mem 0xba2d8000-0xbbffffff]
[ 0.329645] e820: reserve RAM buffer [mem 0xca8bf000-0xcbffffff]
[ 0.329646] e820: reserve RAM buffer [mem 0xca994000-0xcbffffff]
[ 0.329647] e820: reserve RAM buffer [mem 0xcb000000-0xcbffffff]
[ 0.329647] e820: reserve RAM buffer [mem 0x12f600000-0x12fffffff]
[ 0.329664] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.329669] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.332308] clocksource: Switched to clocksource tsc-early
[ 0.339618] VFS: Disk quotas dquot_6.6.0
[ 0.339632] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.339725] AppArmor: AppArmor Filesystem Enabled
[ 0.339739] pnp: PnP ACPI init
[ 0.339838] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.339843] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.339975] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.339976] system 00:01: [io 0xffff] has been reserved
[ 0.339977] system 00:01: [io 0xffff] has been reserved
[ 0.339981] system 00:01: [io 0xffff] has been reserved
[ 0.339981] system 00:01: [io 0x1c00-0x1cfe] has been reserved
[ 0.339982] system 00:01: [io 0x1d00-0x1dfe] has been reserved
[ 0.339983] system 00:01: [io 0x1e00-0x1efe] has been reserved
[ 0.339984] system 00:01: [io 0x1f00-0x1ffe] has been reserved
[ 0.339985] system 00:01: [io 0x1800-0x18fe] has been reserved
[ 0.339986] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.339989] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.340007] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.340040] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.340042] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.340134] system 00:04: [io 0x0a00-0x0a0f] has been reserved
[ 0.340135] system 00:04: [io 0x0a30-0x0a3f] has been reserved
[ 0.340135] system 00:04: [io 0x0a20-0x0a2f] has been reserved
[ 0.340138] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.340163] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.340193] pnp 00:06: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.340224] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.340226] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.340510] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.340512] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.340513] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.340514] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.340515] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.340516] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.340517] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.340518] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.340519] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[ 0.340520] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.340521] system 00:08: [mem 0xf7fdf000-0xf7fdffff] has been reserved
[ 0.340522] system 00:08: [mem 0xf7fe0000-0xf7feffff] has been reserved
[ 0.340524] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.340679] pnp: PnP ACPI: found 9 devices
[ 0.345997] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.346040] NET: Registered protocol family 2
[ 0.346101] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.346561] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.346587] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.346657] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[ 0.346742] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.346772] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.346785] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.346958] NET: Registered protocol family 1
[ 0.346961] NET: Registered protocol family 44
[ 0.346970] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.346972] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.346974] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf70fffff]
[ 0.346976] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.346978] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.346986] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.346987] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
[ 0.346991] pci 0000:00:1c.2: bridge window [mem 0xf7800000-0xf78fffff]
[ 0.346993] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.346998] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.346999] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.346999] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.347000] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.347001] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.347002] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.347003] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.347003] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[ 0.347004] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[ 0.347005] pci_bus 0000:00: resource 13 [mem 0xcfa00000-0xfeafffff window]
[ 0.347006] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.347007] pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf70fffff]
[ 0.347007] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.347008] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.347009] pci_bus 0000:03: resource 1 [mem 0xf7800000-0xf78fffff]
[ 0.347010] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.372053] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x700 took 24262 usecs
[ 0.392044] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x700 took 19512 usecs
[ 0.392059] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.392063] PCI: CLS 64 bytes, default 64
[ 0.392094] Trying to unpack rootfs image as initramfs...
[ 0.854867] Freeing initrd memory: 40796K
[ 0.854879] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.854880] software IO TLB: mapped [mem 0x00000000c68bf000-0x00000000ca8bf000] (64MB)
[ 0.855206] Initialise system trusted keyrings
[ 0.855213] Key type blacklist registered
[ 0.855256] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[ 0.856082] zbud: loaded
[ 0.856197] integrity: Platform Keyring initialized
[ 0.856198] Key type asymmetric registered
[ 0.856199] Asymmetric key parser 'x509' registered
[ 0.856204] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.856231] io scheduler mq-deadline registered
[ 0.856651] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.856659] intel_idle: MWAIT substates: 0x42120
[ 0.856660] intel_idle: v0.5.1 model 0x3C
[ 0.856785] intel_idle: Local APIC timer is reliable in all C-states
[ 0.857114] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.857115] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.857254] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.857255] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.857344] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.857700] Linux agpgart interface v0.103
[ 0.857723] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 0.857723] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[ 0.857904] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.858261] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.858264] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.858338] mousedev: PS/2 mouse device common for all mice
[ 0.858363] rtc_cmos 00:02: RTC can wake from S4
[ 0.858499] rtc_cmos 00:02: registered as rtc0
[ 0.858535] rtc_cmos 00:02: setting system clock to 2021-08-06T09:21:40 UTC (1628241700)
[ 0.858546] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.858553] intel_pstate: Intel P-state driver initializing
[ 0.858661] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.858923] NET: Registered protocol family 10
[ 0.864128] Segment Routing with IPv6
[ 0.864149] mip6: Mobile IPv6
[ 0.864151] NET: Registered protocol family 17
[ 0.864186] mpls_gso: MPLS GSO support
[ 0.864350] microcode: sig=0x306c3, pf=0x2, revision=0x19
[ 0.864362] microcode: Microcode Update Driver: v2.2.
[ 0.864366] IPI shorthand broadcast: enabled
[ 0.864371] sched_clock: Marking stable (860898630, 3412935)->(867840359, -3528794)
[ 0.864443] registered taskstats version 1
[ 0.864445] Loading compiled-in X.509 certificates
[ 0.888609] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.890177] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 0.890188] Loaded X.509 cert 'Debian Secure Boot Signer 2021 - linux: 4b6ef5abca669825178e052c84667ccbc0531f8c'
[ 0.890206] zswap: loaded using pool lzo/zbud
[ 0.890328] Key type ._fscrypt registered
[ 0.890329] Key type .fscrypt registered
[ 0.890330] Key type fscrypt-provisioning registered
[ 0.890354] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.891413] Freeing unused kernel image (initmem) memory: 2396K
[ 0.912008] Write protecting the kernel read-only data: 22528k
[ 0.912386] Freeing unused kernel image (text/rodata gap) memory: 2040K
[ 0.912509] Freeing unused kernel image (rodata/data gap) memory: 640K
[ 0.954238] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.954240] x86/mm: Checking user space page tables
[ 0.993881] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.993891] Run /init as init process
[ 0.993893] with arguments:
[ 0.993893] /init
[ 0.993894] with environment:
[ 0.993895] HOME=/
[ 0.993895] TERM=linux
[ 0.993896] BOOT_IMAGE=/boot/vmlinuz-5.10.0-8-amd64
[ 1.032718] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 1.060185] ACPI: bus type USB registered
[ 1.060209] usbcore: registered new interface driver usbfs
[ 1.060218] usbcore: registered new interface driver hub
[ 1.060228] usbcore: registered new device driver usb
[ 1.061141] ACPI: Power Button [PWRB]
[ 1.061206] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.061239] ACPI: Power Button [PWRF]
[ 1.076045] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.076052] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 1.077096] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[ 1.077100] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.077249] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 1.077251] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.077252] usb usb1: Product: xHCI Host Controller
[ 1.077253] usb usb1: Manufacturer: Linux 5.10.0-8-amd64 xhci-hcd
[ 1.077255] usb usb1: SerialNumber: 0000:00:14.0
[ 1.078164] hub 1-0:1.0: USB hub found
[ 1.078175] hub 1-0:1.0: 10 ports detected
[ 1.079787] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.079791] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.079795] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 1.079828] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[ 1.079829] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.079831] usb usb2: Product: xHCI Host Controller
[ 1.079832] usb usb2: Manufacturer: Linux 5.10.0-8-amd64 xhci-hcd
[ 1.079833] usb usb2: SerialNumber: 0000:00:14.0
[ 1.080323] hub 2-0:1.0: USB hub found
[ 1.080330] hub 2-0:1.0: 2 ports detected
[ 1.081219] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20200925/utaddress-204)
[ 1.081223] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.081225] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20200925/utaddress-204)
[ 1.081227] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.081228] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20200925/utaddress-204)
[ 1.081230] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20200925/utaddress-204)
[ 1.081232] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.081232] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20200925/utaddress-204)
[ 1.081234] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20200925/utaddress-204)
[ 1.081236] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.081236] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 1.083487] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.083881] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
[ 1.083984] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[ 1.084005] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.084291] ehci-pci: EHCI PCI platform driver
[ 1.087221] SCSI subsystem initialized
[ 1.089676] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.101828] libata version 3.00 loaded.
[ 1.106304] ahci 0000:00:1f.2: version 3.0
[ 1.122736] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.122744] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.122759] ehci-pci 0000:00:1a.0: debug port 2
[ 1.122792] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x3 impl SATA mode
[ 1.122794] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems
[ 1.123183] i2c i2c-0: 1/4 memory slots populated (from DMI)
[ 1.123705] i2c i2c-0: Successfully instantiated SPD at 0x50
[ 1.125873] libphy: r8169: probed
[ 1.126172] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl, 74:d4:35:6c:0e:a3, XID 2c9, IRQ 29
[ 1.126174] r8169 0000:03:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[ 1.126673] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.126703] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf791c000
[ 1.127119] r8169 0000:03:00.0 enp3s0: renamed from eth0
[ 1.132731] scsi host0: ahci
[ 1.132906] scsi host1: ahci
[ 1.133072] scsi host2: ahci
[ 1.136333] scsi host3: ahci
[ 1.136379] ata1: SATA max UDMA/133 abar m2048@0xf791a000 port 0xf791a100 irq 28
[ 1.136381] ata2: SATA max UDMA/133 abar m2048@0xf791a000 port 0xf791a180 irq 28
[ 1.136382] ata3: DUMMY
[ 1.136383] ata4: DUMMY
[ 1.144309] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.144348] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 1.144349] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.144350] usb usb3: Product: EHCI Host Controller
[ 1.144351] usb usb3: Manufacturer: Linux 5.10.0-8-amd64 ehci_hcd
[ 1.144352] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.144456] hub 3-0:1.0: USB hub found
[ 1.144464] hub 3-0:1.0: 2 ports detected
[ 1.144741] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.144745] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 1.144754] ehci-pci 0000:00:1d.0: debug port 2
[ 1.148646] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.148655] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf791b000
[ 1.164308] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.164346] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 1.164347] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.164348] usb usb4: Product: EHCI Host Controller
[ 1.164348] usb usb4: Manufacturer: Linux 5.10.0-8-amd64 ehci_hcd
[ 1.164349] usb usb4: SerialNumber: 0000:00:1d.0
[ 1.164458] hub 4-0:1.0: USB hub found
[ 1.164464] hub 4-0:1.0: 2 ports detected
[ 1.216740] nouveau 0000:01:00.0: vgaarb: deactivate vga console
[ 1.220685] Console: switching to colour dummy device 80x25
[ 1.220786] nouveau 0000:01:00.0: NVIDIA G86 (086100a2)
[ 1.244456] i915 0000:00:02.0: enabling device (0006 -> 0007)
[ 1.244755] i915 0000:00:02.0: [drm] PipeC fused off
[ 1.247047] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=mem
[ 1.326823] nouveau 0000:01:00.0: bios: version 60.86.65.00.00
[ 1.326879] [drm] Initialized i915 1.6.0 20200917 for 0000:00:02.0 on minor 0
[ 1.327804] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.327990] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 1.338574] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes
[ 1.347462] nouveau 0000:01:00.0: bios: M0203T not found
[ 1.347463] nouveau 0000:01:00.0: bios: M0203E not matched!
[ 1.347464] nouveau 0000:01:00.0: fb: 512 MiB DDR2
[ 1.400306] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 1.411880] [TTM] Zone kernel: Available graphics memory: 1961910 KiB
[ 1.411881] [TTM] Initializing pool allocator
[ 1.411884] [TTM] Initializing DMA pool allocator
[ 1.411893] nouveau 0000:01:00.0: DRM: VRAM: 512 MiB
[ 1.411894] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[ 1.411896] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[ 1.411897] nouveau 0000:01:00.0: DRM: DCB version 4.0
[ 1.411899] nouveau 0000:01:00.0: DRM: DCB outp 00: 02000300 00000028
[ 1.411900] nouveau 0000:01:00.0: DRM: DCB outp 01: 01000302 00020030
[ 1.411901] nouveau 0000:01:00.0: DRM: DCB outp 02: 04011310 00000028
[ 1.411901] nouveau 0000:01:00.0: DRM: DCB outp 03: 010223f1 00c0c083
[ 1.411902] nouveau 0000:01:00.0: DRM: DCB conn 00: 1030
[ 1.411903] nouveau 0000:01:00.0: DRM: DCB conn 01: 0100
[ 1.411904] nouveau 0000:01:00.0: DRM: DCB conn 02: 0210
[ 1.411905] nouveau 0000:01:00.0: DRM: DCB conn 03: 0211
[ 1.411905] nouveau 0000:01:00.0: DRM: DCB conn 04: 0213
[ 1.411906] nouveau 0000:01:00.0: DRM: DCB conn 05: 0362
[ 1.413714] nouveau 0000:01:00.0: DRM: MM: using CRYPT for buffer copies
[ 1.425253] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 1.425585] nouveau 0000:01:00.0: DRM: failed to create encoder 0/1/0: -19
[ 1.425587] nouveau 0000:01:00.0: DRM: TV-1 has no encoders, removing
[ 1.450521] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.450555] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.451410] ata1.00: ATA-8: Hitachi HDS721032CLA362, JPFOA3EA, max UDMA/133
[ 1.451411] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.452342] ata1.00: configured for UDMA/133
[ 1.452430] scsi 0:0:0:0: Direct-Access ATA Hitachi HDS72103 A3EA PQ: 0 ANSI: 5
[ 1.452812] ata2.00: ATAPI: TSSTcorp CDDVDW SH-224DB, SB01, max UDMA/100
[ 1.453661] ata2.00: configured for UDMA/100
[ 1.455038] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SH-224DB SB01 PQ: 0 ANSI: 5
[ 1.464503] nouveau 0000:01:00.0: DRM: allocated 1280x1024 fb: 0x70000, bo 00000000a4866ed8
[ 1.464539] fbcon: nouveaudrmfb (fb0) is primary device
[ 1.491436] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes
[ 1.496908] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.496917] sd 0:0:0:0: [sda] Write Protect is off
[ 1.496918] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.496931] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.499243] Console: switching to colour frame buffer device 128x48
[ 1.499524] nouveau 0000:01:00.0: [drm] fb0: nouveaudrmfb frame buffer device
[ 1.520478] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 1
[ 1.531937] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.531939] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.559179] sda: sda1 sda2 < sda5 >
[ 1.559598] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.564674] usb 3-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05
[ 1.564687] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.564969] hub 3-1:1.0: USB hub found
[ 1.565038] hub 3-1:1.0: 4 ports detected
[ 1.584668] usb 4-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05
[ 1.584670] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.584809] hub 4-1:1.0: USB hub found
[ 1.584912] hub 4-1:1.0: 6 ports detected
[ 1.588460] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.884323] tsc: Refined TSC clocksource calibration: 3392.144 MHz
[ 1.884328] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30e5517d4e4, max_idle_ns: 440795261668 ns
[ 1.884344] clocksource: Switched to clocksource tsc
[ 2.046367] PM: Image not found (code -22)
[ 2.112975] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[ 2.396820] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.709899] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 3.727380] systemd[1]: Inserted module 'autofs4'
[ 3.949267] systemd[1]: systemd 247.3-6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[ 3.968486] systemd[1]: Detected architecture x86-64.
[ 3.985355] systemd[1]: Set hostname to <eco1>.
[ 5.215531] systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
[ 5.466406] systemd[1]: Queued start job for default target Graphical Interface.
[ 5.468690] systemd[1]: Created slice system-getty.slice.
[ 5.469357] systemd[1]: Created slice system-modprobe.slice.
[ 5.469932] systemd[1]: Created slice User and Session Slice.
[ 5.470168] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 5.470580] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 5.470726] systemd[1]: Reached target User and Group Name Lookups.
[ 5.470771] systemd[1]: Reached target Remote File Systems.
[ 5.470796] systemd[1]: Reached target Slices.
[ 5.471146] systemd[1]: Listening on Syslog Socket.
[ 5.471394] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 5.471525] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 5.471941] systemd[1]: Listening on Journal Audit Socket.
[ 5.472192] systemd[1]: Listening on Journal Socket (/dev/log).
[ 5.472491] systemd[1]: Listening on Journal Socket.
[ 5.498109] systemd[1]: Listening on udev Control Socket.
[ 5.498400] systemd[1]: Listening on udev Kernel Socket.
[ 5.500269] systemd[1]: Mounting Huge Pages File System...
[ 5.501071] systemd[1]: Mounting POSIX Message Queue File System...
[ 5.501743] systemd[1]: Mounting Kernel Debug File System...
[ 5.502268] systemd[1]: Mounting Kernel Trace File System...
[ 5.519295] systemd[1]: Starting Set the console keyboard layout...
[ 5.519935] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 5.520505] systemd[1]: Starting Load Kernel Module configfs...
[ 5.521324] systemd[1]: Starting Load Kernel Module drm...
[ 5.522191] systemd[1]: Starting Load Kernel Module fuse...
[ 5.548615] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 5.548653] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 5.549792] systemd[1]: Starting Journal Service...
[ 5.555830] systemd[1]: Starting Load Kernel Modules...
[ 5.556508] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 5.557158] systemd[1]: Starting Coldplug All udev Devices...
[ 5.558392] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 5.558599] systemd[1]: modprobe@drm.service: Succeeded.
[ 5.558724] systemd[1]: Finished Load Kernel Module drm.
[ 5.620831] systemd[1]: modprobe@configfs.service: Succeeded.
[ 5.620966] systemd[1]: Finished Load Kernel Module configfs.
[ 5.621535] systemd[1]: Mounting Kernel Configuration File System...
[ 5.633257] fuse: init (API version 7.32)
[ 5.633752] systemd[1]: modprobe@fuse.service: Succeeded.
[ 5.633898] systemd[1]: Finished Load Kernel Module fuse.
[ 5.634576] systemd[1]: Mounting FUSE Control File System...
[ 5.696210] systemd[1]: Started Journal Service.
[ 5.890938] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 5.963978] systemd-journald[242]: Received client request to flush runtime journal.
[ 6.072898] lp: driver loaded but no devices found
[ 6.121120] ppdev: user-space parallel port driver
[ 8.792299] audit: type=1400 audit(1628241708.425:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=286 comm="apparmor_parser"
[ 8.793318] audit: type=1400 audit(1628241708.429:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=286 comm="apparmor_parser"
[ 8.802406] audit: type=1400 audit(1628241708.437:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=288 comm="apparmor_parser"
[ 8.838374] audit: type=1400 audit(1628241708.473:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="postgresql_akonadi" pid=287 comm="apparmor_parser"
[ 8.865494] audit: type=1400 audit(1628241708.501:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=291 comm="apparmor_parser"
[ 8.890752] audit: type=1400 audit(1628241708.525:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=285 comm="apparmor_parser"
[ 8.934303] audit: type=1400 audit(1628241708.569:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/haveged" pid=293 comm="apparmor_parser"
[ 8.943253] audit: type=1400 audit(1628241708.577:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=294 comm="apparmor_parser"
[ 8.948600] audit: type=1400 audit(1628241708.585:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="mysqld_akonadi" pid=292 comm="apparmor_parser"
[ 9.021066] audit: type=1400 audit(1628241708.657:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=296 comm="apparmor_parser"
[ 9.417666] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 9.611959] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 9.611963] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 9.611964] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 9.611965] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 9.611966] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 9.741443] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 9.742578] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 9.754988] at24 0-0050: supply vcc not found, using dummy regulator
[ 9.756532] at24 0-0050: 256 byte spd EEPROM, read-only
[ 9.828999] cryptd: max_cpu_qlen set to 1000
[ 9.965370] iTCO_vendor_support: vendor-support=0
[ 10.028691] AVX2 version of gcm_enc/dec engaged.
[ 10.028694] AES CTR mode by8 optimization enabled
[ 10.158118] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 10.158153] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[ 10.741164] intel_rapl_common: Found RAPL domain package
[ 10.741167] intel_rapl_common: Found RAPL domain core
[ 10.741167] intel_rapl_common: Found RAPL domain uncore
[ 10.741168] intel_rapl_common: Found RAPL domain dram
[ 10.874464] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 10.944280] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input7
[ 10.944459] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input8
[ 10.944510] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9
[ 10.944557] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
[ 10.944604] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
[ 11.012311] Adding 999420k swap on /dev/sda5. Priority:-2 extents:1 across:999420k FS
[ 11.026360] snd_hda_codec_realtek hdaudioC1D2: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 11.026363] snd_hda_codec_realtek hdaudioC1D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 11.026364] snd_hda_codec_realtek hdaudioC1D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 11.026365] snd_hda_codec_realtek hdaudioC1D2: mono: mono_out=0x0
[ 11.026365] snd_hda_codec_realtek hdaudioC1D2: inputs:
[ 11.026366] snd_hda_codec_realtek hdaudioC1D2: Rear Mic=0x18
[ 11.026367] snd_hda_codec_realtek hdaudioC1D2: Front Mic=0x19
[ 11.026368] snd_hda_codec_realtek hdaudioC1D2: Line=0x1a
[ 11.026369] snd_hda_codec_realtek hdaudioC1D2: CD=0x1c
[ 11.039565] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[ 11.039619] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[ 11.039663] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[ 11.039707] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[ 11.039754] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
[ 11.039818] snd_hda_intel 0000:00:1b.0: device 1458:a002 is on the power_save denylist, forcing power_save to 0
[ 13.878650] kauditd_printk_skb: 8 callbacks suppressed
[ 13.878651] audit: type=1400 audit(1628241713.513:20): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice" pid=298 comm="apparmor_parser"
[ 13.879969] audit: type=1400 audit(1628241713.513:21): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice//gpg" pid=298 comm="apparmor_parser"
[ 22.255476] r8169 0000:03:00.0: firmware: failed to load rtl_nic/rtl8168e-3.fw (-2)
[ 22.255629] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
[ 22.255766] r8169 0000:03:00.0: Direct firmware load for rtl_nic/rtl8168e-3.fw failed with error -2
[ 22.255770] r8169 0000:03:00.0: Unable to load firmware rtl_nic/rtl8168e-3.fw (-2)
[ 22.256395] RTL8211E Gigabit Ethernet r8169-300:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE)
[ 22.326426] r8169 0000:03:00.0 enp3s0: Link is Down
[ 22.570937] audit: type=1400 audit(1628241722.209:22): apparmor="DENIED" operation="capable" profile="/usr/sbin/cupsd" pid=531 comm="cupsd" capability=12 capname="net_admin"
[ 23.526044] audit: type=1400 audit(1628241723.161:23): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=556 comm="cups-browsed" capability=23 capname="sys_nice"
[ 25.197843] r8169 0000:03:00.0 enp3s0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 25.197861] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
00:00.0 Host bridge: Intel Corporation 4th Gen Core Processor DRAM Controller (rev 06)
Subsystem: Gigabyte Technology Co., Ltd 4th Gen Core Processor DRAM Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
Kernel driver in use: hsw_uncore
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 24
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff [size=4K]
Memory behind bridge: f4000000-f70fffff [size=49M]
Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff [size=256M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [88] Subsystem: Gigabyte Technology Co., Ltd Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller
Capabilities: [80] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee04004 Data: 4021
Capabilities: [a0] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0
ExtTag- RBE+
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend-
LnkCap: Port #2, Speed 5GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <256ns, L1 <8us
ClockPM- Surprise- LLActRep- BwNot+ ASPMOptComp+
LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s (downgraded), Width x16 (ok)
TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #1, PowerLimit 75.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState-
RootCap: CRSVisible-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Not Supported, TimeoutDis- NROPrPrP- LTR+
10BitTagComp- 10BitTagReq- OBFF Via WAKE#, ExtFmt- EETLPPrefix-
EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
FRS- LN System CLS Not Supported, TPHComp- ExtTPHComp- ARIFwd-
AtomicOpsCap: Routing- 32bit+ 64bit+ 128bitCAS+
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR+ OBFF Via WAKE#, ARIFwd-
AtomicOpsCtl: ReqEn- EgressBlck-
LnkCap2: Supported Link Speeds: 2.5-5GT/s, Crosslink- Retimer- 2Retimers- DRS-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1-
EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
Retimer- 2Retimers- CrosslinkRes: unsupported
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [140 v1] Root Complex Link
Desc: PortNumber=02 ComponentID=01 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=01 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000fed19000
Kernel driver in use: pcieport
00:02.0 VGA compatible controller: Intel Corporation 4th Generation Core Processor Family Integrated Graphics Controller (rev 06) (prog-if 00 [VGA controller])
Subsystem: Gigabyte Technology Co., Ltd 4th Generation Core Processor Family Integrated Graphics Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f7400000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [disabled] [size=64]
Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a4] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel modules: i915
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
Subsystem: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7914000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE- FLReset+
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend-
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 05) (prog-if 30 [XHCI])
Subsystem: Gigabyte Technology Co., Ltd 8 Series/C220 Series Chipset Family USB xHCI
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 29
Region 0: Memory at f7900000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [70] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] MSI: Enable+ Count=1/8 Maskable- 64bit+
Address: 00000000fee08004 Data: 4023
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)
Subsystem: Gigabyte Technology Co., Ltd 8 Series/C220 Series Chipset Family MEI Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 30
Region 0: Memory at f791e000 (64-bit, non-prefetchable) [size=16]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee02004 Data: 4024
Kernel driver in use: mei_me
Kernel modules: mei_me
00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 05) (prog-if 20 [EHCI])
Subsystem: Gigabyte Technology Co., Ltd 8 Series/C220 Series Chipset Family USB EHCI
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f791c000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05)
Subsystem: Gigabyte Technology Co., Ltd 8 Series/C220 Series Chipset High Definition Audio Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 31
Region 0: Memory at f7910000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee04004 Data: 4024
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE- FLReset+
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- FLReset-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=2 ArbSelect=Fixed TC/VC=04
Status: NegoPending- InProgress-
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 25
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: [disabled]
Memory behind bridge: [disabled]
Prefetchable memory behind bridge: [disabled]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE+
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <1us, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot+ ASPMOptComp-
LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s (downgraded), Width x0 (downgraded)
TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #0, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCap: CRSVisible-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABC, TimeoutDis+ NROPrPrP- LTR+
10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix-
EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
FRS- LN System CLS Not Supported, TPHComp- ExtTPHComp- ARIFwd-
AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR+ OBFF Disabled, ARIFwd-
AtomicOpsCtl: ReqEn- EgressBlck-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete- EqualizationPhase1-
EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
Retimer- 2Retimers- CrosslinkRes: unsupported
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee08004 Data: 4021
Capabilities: [90] Subsystem: Gigabyte Technology Co., Ltd 8 Series/C220 Series Chipset Family PCI Express Root Port
Capabilities: [a0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D3 NoSoftRst- PME-Enable+ DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
00:1c.2 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 (rev d5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 26
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff [size=4K]
Memory behind bridge: f7800000-f78fffff [size=1M]
Prefetchable memory behind bridge: 00000000f0000000-00000000f00fffff [size=1M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE+
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend-
LnkCap: Port #3, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <512ns, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot+ ASPMOptComp-
LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s (downgraded), Width x1 (ok)
TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #2, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState-
RootCap: CRSVisible-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABC, TimeoutDis+ NROPrPrP- LTR+
10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix-
EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
FRS- LN System CLS Not Supported, TPHComp- ExtTPHComp- ARIFwd-
AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR+ OBFF Disabled, ARIFwd-
AtomicOpsCtl: ReqEn- EgressBlck-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete- EqualizationPhase1-
EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
Retimer- 2Retimers- CrosslinkRes: unsupported
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee01004 Data: 4021
Capabilities: [90] Subsystem: Gigabyte Technology Co., Ltd 8 Series/C220 Series Chipset Family PCI Express Root Port
Capabilities: [a0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 05) (prog-if 20 [EHCI])
Subsystem: Gigabyte Technology Co., Ltd 8 Series/C220 Series Chipset Family USB EHCI
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f791b000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1f.0 ISA bridge: Intel Corporation H81 Express LPC Controller (rev 05)
Subsystem: Gigabyte Technology Co., Ltd H81 Express LPC Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: Gigabyte Technology Co., Ltd 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 28
Region 0: I/O ports at f0b0 [size=8]
Region 1: I/O ports at f0a0 [size=4]
Region 2: I/O ports at f090 [size=8]
Region 3: I/O ports at f080 [size=4]
Region 4: I/O ports at f060 [size=32]
Region 5: Memory at f791a000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee04004 Data: 4023
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 05)
Subsystem: Gigabyte Technology Co., Ltd 8 Series/C220 Series Chipset Family SMBus Controller
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f7919000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
01:00.0 VGA compatible controller: NVIDIA Corporation G86 [GeForce 8500 GT] (rev a1) (prog-if 00 [VGA controller])
Subsystem: CardExpert Technology G86 [GeForce 8500 GT]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f6000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at f4000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at e000 [size=128]
Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [78] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 75.000W
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd- ExtTag+ PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s, Exit Latency L0s <512ns
ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
LnkCtl: ASPM Disabled; RCB 128 bytes, Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s (ok), Width x16 (ok)
TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [128 v1] Power Budgeting <?>
Capabilities: [600 v1] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
Kernel modules: nouveau
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)
Subsystem: Gigabyte Technology Co., Ltd Onboard Ethernet
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at d000 [size=256]
Region 2: Memory at f7800000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at f0000000 (64-bit, prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express (v2) Endpoint, MSI 01
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 10.000W
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s unlimited, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp-
LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s (ok), Width x1 (ok)
TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ NROPrPrP- LTR-
10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix-
EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
FRS- TPHComp- ExtTPHComp-
AtomicOpsCap: 32bit- 64bit- 128bitCAS-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- OBFF Disabled,
AtomicOpsCtl: ReqEn-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1-
EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
Retimer- 2Retimers- CrosslinkRes: unsupported
Capabilities: [b0] MSI-X: Enable+ Count=4 Masked-
Vector table: BAR=4 offset=00000000
PBA: BAR=4 offset=00000800
Capabilities: [d0] Vital Product Data
Not readable
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
AERCap: First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn-
MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
HeaderLog: 00000000 00000000 00000000 00000000
Capabilities: [140 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 01-00-00-00-68-4c-e0-00
Kernel driver in use: r8169
Kernel modules: r8169
Reply to: