--- Begin Message ---
- To: "submit@bugs.debian.org" <submit@bugs.debian.org>
- Subject: linux-image-4.9.0-3-amd64: Various USB Wifi adapters don't work after upgrade to Stretch (Installing new kernel)
- From: Jon <jonply@yahoo.com>
- Date: Sun, 23 Jul 2017 06:19:50 +0000 (UTC)
- Message-id: <444356866.2998518.1500790790128@mail.yahoo.com>
- Reply-to: Jon <jonply@yahoo.com>
- References: <444356866.2998518.1500790790128.ref@mail.yahoo.com>
Package: src:linux
Version: 4.9.30-2+deb9u2
Severity: grave
Tags: ipv6
Justification: renders package unusable
Dear Maintainer,
I recently aquired this computer with clean hard drive attempted to install Stretch. Knowing that y USB WiFi adapter needed the ath9k firmware, I also downloaded the firmware-atheros_20161130-3_all.deb to emulate the process of getting Jessie to utilize the doggle on my other computer. After offline install and reboot, attempted to connect to network and received " [drm:i965_irq_handler [i915]] *ERROR* CPU pipe A FIFO underrun ". I then attempted a different network dongle, rt2870 chipset (firmware-misc-nonfree) and received same error.
I then tried install from NETINSTALL, and the device was registered and worked properly during install process. After reboot, again received the same error on both cards, individually inserted. I also attempted a reboot during the switch of the dongle.
In installing Jessie (8.5.0 amd4), I was able to make both cards work during normal operations, but upon upgrade using Aptitude, lost functionality.
Other Stretch live-OS derivitives are able to use dongle during normal operations.
Attempting to attach (partial) dmesg output.
-- Package-specific info:
** Version:
Linux version 4.9.0-3-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.30-2+deb9u2 (2017-06-26)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.9.0-3-amd64 root=UUID=3443e0d8-0abf-4b5f-8c96-d5202ebe859e ro quiet
** Tainted: I (2048)
* Working around severe firmware bug.
** Kernel log:
Unable to read kernel log; any relevant messages should be attached
** Model information
sys_vendor: Dell Inc.
product_name: OptiPlex 380
product_version:
chassis_vendor: Dell Inc.
chassis_version:
bios_vendor: Dell Inc.
bios_version: A07
board_vendor: Dell Inc.
board_name: 0HN7XN
board_version: A01
** Loaded modules:
arc4
coretemp
kvm_intel
kvm
irqbypass
dell_wmi
sparse_keymap
iTCO_wdt
iTCO_vendor_support
ppdev
dell_smbios
joydev
evdev
dcdbas
snd_hda_codec_realtek
snd_hda_codec_generic
ath9k_htc
ath9k_common
ath9k_hw
pcspkr
lpc_ich
i915
snd_hda_intel
mfd_core
snd_hda_codec
snd_hda_core
snd_hwdep
snd_pcm
ath
mac80211
cfg80211
rfkill
snd_timer
serio_raw
snd
soundcore
rng_core
video
parport_pc
parport
drm_kms_helper
drm
sg
i2c_algo_bit
button
wmi
shpchp
acpi_cpufreq
sunrpc
ip_tables
x_tables
autofs4
ext4
crc16
jbd2
crc32c_generic
fscrypto
ecb
glue_helper
lrw
gf128mul
ablk_helper
cryptd
aes_x86_64
mbcache
hid_generic
usbhid
hid
sr_mod
cdrom
sd_mod
ata_generic
broadcom
bcm_phy_lib
ata_piix
psmouse
libata
scsi_mod
i2c_i801
i2c_smbus
tg3
ehci_pci
ptp
pps_core
libphy
uhci_hcd
ehci_hcd
usbcore
usb_common
** Network interface configuration:
source /etc/network/interfaces.d/*
auto lo
iface lo inet loopback
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether bc:30:5b:ac:fc:f6 brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 64:70:02:20:15:ba brd ff:ff:ff:ff:ff:ff
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
eth0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
wlan0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
lo: 337200 4164 0 0 0 0 0 0 337200 4164 0 0 0 0 0 0
*** Protocol statistics:
Ip:
Forwarding: 2
4162 total packets received
0 forwarded
0 incoming packets discarded
4162 incoming packets delivered
4162 requests sent out
1040 outgoing packets dropped
2 dropped because of missing route
Icmp:
2080 ICMP messages received
0 input ICMP message failed
ICMP input histogram:
destination unreachable: 2080
2080 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 2080
IcmpMsg:
InType3: 2080
OutType3: 2080
Tcp:
2 active connection openings
0 passive connection openings
2 failed connection attempts
0 connection resets received
0 connections established
4 segments received
4 segments sent out
0 segments retransmitted
0 bad segments received
2 resets sent
Udp:
0 packets received
2080 packets to unknown port received
0 packet receive errors
2080 packets sent
0 receive buffer errors
0 send buffer errors
UdpLite:
TcpExt:
0 packet headers predicted
IpExt:
InOctets: 337060
OutOctets: 337060
InNoECTPkts: 4162
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 4 Series Chipset DRAM Controller [8086:2e30] (rev 03)
Subsystem: Dell 4 Series Chipset DRAM Controller [1028:0400]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
00:01.0 PCI bridge [0604]: Intel Corporation 4 Series Chipset PCI Express Root Port [8086:2e31] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 24
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: fe500000-fe5fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [88] Subsystem: Dell 4 Series Chipset PCI Express Root Port [1028:0400]
Capabilities: [80] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 41a1
Capabilities: [a0] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x16, ASPM L0s, Exit Latency L0s <256ns, L1 <4us
ClockPM- Surprise- LLActRep- BwNot+ ASPMOptComp-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #1, PowerLimit 75.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending+ InProgress-
Capabilities: [140 v1] Root Complex Link
Desc: PortNumber=02 ComponentID=01 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=01 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000feda5000
Kernel driver in use: pcieport
Kernel modules: shpchp
00:02.0 VGA compatible controller [0300]: Intel Corporation 4 Series Chipset Integrated Graphics Controller [8086:2e32] (rev 03) (prog-if 00 [VGA controller])
Subsystem: Dell 4 Series Chipset Integrated Graphics Controller [1028:0400]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 27
Region 0: Memory at fe800000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at ecd8 [size=8]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0200c Data: 4172
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: i915
Kernel modules: i915
00:02.1 Display controller [0380]: Intel Corporation 4 Series Chipset Integrated Graphics Controller [8086:2e33] (rev 03)
Subsystem: Dell 4 Series Chipset Integrated Graphics Controller [1028:0400]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at fe700000 (64-bit, non-prefetchable) [size=1M]
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
00:1b.0 Audio device [0403]: Intel Corporation NM10/ICH7 Family High Definition Audio Controller [8086:27d8] (rev 01)
Subsystem: Dell NM10/ICH7 Family High Definition Audio Controller [1028:0400]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 26
Region 0: Memory at fe6fc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0200c Data: 4162
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=80
Status: NegoPending- InProgress-
Capabilities: [130 v1] Root Complex Link
Desc: PortNumber=0f ComponentID=02 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000feda8000
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 25
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: fe400000-fe4fffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f01fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s, Exit Latency L0s <256ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot- ASPMOptComp-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #4, PowerLimit 10.000W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 41b1
Capabilities: [90] Subsystem: Dell NM10/ICH7 Family PCI Express Port 1 [1028:0400]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable- ID=0 ArbSelect=Fixed TC/VC=00
Status: NegoPending- InProgress-
Capabilities: [180 v1] Root Complex Link
Desc: PortNumber=01 ComponentID=02 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000feda8001
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell NM10/ICH7 Family USB UHCI Controller [1028:0400]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 21
Region 4: I/O ports at ff80 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 [8086:27c9] (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell NM10/ICH7 Family USB UHCI Controller [1028:0400]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 22
Region 4: I/O ports at ff60 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 [8086:27ca] (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell NM10/ICH7 Family USB UHCI Controller [1028:0400]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at ff40 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1d.3 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 [8086:27cb] (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell NM10/ICH7 Family USB UHCI Controller [1028:0400]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 4: I/O ports at ff20 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI])
Subsystem: Dell NM10/ICH7 Family USB2 EHCI Controller [1028:0400]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 21
Region 0: Memory at ff980000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Subsystem: Dell 82801 PCI Bridge [1028:0000]
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
Kernel driver in use: lpc_ich
Kernel modules: intel_rng, lpc_ich, leds_ss4200
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: Dell 82801G (ICH7 Family) IDE Controller [1028:0400]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374
Region 4: I/O ports at ffa0 [size=16]
Kernel driver in use: ata_piix
Kernel modules: ata_piix, ata_generic
00:1f.2 IDE interface [0101]: Intel Corporation NM10/ICH7 Family SATA Controller [IDE mode] [8086:27c0] (rev 01) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Dell NM10/ICH7 Family SATA Controller [IDE mode] [1028:0400]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 20
Region 0: I/O ports at fe00 [size=8]
Region 1: I/O ports at fe10 [size=4]
Region 2: I/O ports at fe20 [size=8]
Region 3: I/O ports at fe30 [size=4]
Region 4: I/O ports at fec0 [size=16]
Capabilities: [70] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ata_piix
Kernel modules: ata_piix, ata_generic
00:1f.3 SMBus [0c05]: Intel Corporation NM10/ICH7 Family SMBus Controller [8086:27da] (rev 01)
Subsystem: Dell NM10/ICH7 Family SMBus Controller [1028:0400]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at ece0 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
02:00.0 Ethernet controller [0200]: Broadcom Limited NetLink BCM57780 Gigabit Ethernet PCIe [14e4:1692] (rev 01)
Subsystem: Dell NetLink BCM57780 Gigabit Ethernet PCIe [1028:0400]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe4f0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [48] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [60] Vendor Specific Information: Len=6c <?>
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 00000000fee0300c Data: 4122
Capabilities: [cc] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 10.000W
DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported-
RlxdOrd- ExtTag+ PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <1us, L1 <32us
ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR-, OBFF Not Supported
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [13c v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number bc-30-5b-ff-fe-ac-fc-f6
Capabilities: [16c v1] Power Budgeting <?>
Kernel driver in use: tg3
Kernel modules: tg3
** USB devices:
Bus 005 Device 003: ID 0cf3:9271 Atheros Communications, Inc. AR9271 802.11n
Bus 005 Device 005: ID 0e8f:0022 GreenAsia Inc. multimedia keyboard controller
Bus 005 Device 004: ID 046d:c404 Logitech, Inc. TrackMan Wheel
Bus 005 Device 002: ID 0409:0058 NEC Corp. HighSpeed Hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: 9.1
APT prefers stable
APT policy: (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 4.9.0-3-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-4.9.0-3-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.130
ii kmod 23-2
ii linux-base 4.5
Versions of packages linux-image-4.9.0-3-amd64 recommends:
ii firmware-linux-free 3.4
ii irqbalance 1.1.0-2.3
Versions of packages linux-image-4.9.0-3-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02~beta3-5
pn linux-doc-4.9 <none>
Versions of packages linux-image-4.9.0-3-amd64 is related to:
pn firmware-amd-graphics <none>
ii firmware-atheros 20161130-3
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
ii firmware-ipw2x00 20161130-3
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
ii firmware-misc-nonfree 20161130-3
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
*** dmesg.txt
[ 0.000000] Linux version 4.9.0-3-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.30-2+deb9u2 (2017-06-26)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-3-amd64 root=UUID=3443e0d8-0abf-4b5f-8c96-d5202ebe859e ro quiet
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007da08bff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007da08c00-0x000000007da5cbff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007da5cc00-0x000000007da5ebff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007da5ec00-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fed003ff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed9ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: Dell Inc. OptiPlex 380 /0HN7XN, BIOS A07 06/13/2012
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x7da08 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 07DC00000 mask FFFC00000 uncachable
[ 0.000000] 1 base 07E000000 mask FFE000000 uncachable
[ 0.000000] 2 base 07DB00000 mask FFFF00000 uncachable
[ 0.000000] 3 base 080000000 mask F80000000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] found SMP MP-table at [mem 0x000fe710-0x000fe71f] mapped at [ffff8af4400fe710]
[ 0.000000] Base memory trampoline at [ffff8af440099000] 99000 size 24576
[ 0.000000] BRK [0x0fb2e000, 0x0fb2efff] PGTABLE
[ 0.000000] BRK [0x0fb2f000, 0x0fb2ffff] PGTABLE
[ 0.000000] BRK [0x0fb30000, 0x0fb30fff] PGTABLE
[ 0.000000] BRK [0x0fb31000, 0x0fb31fff] PGTABLE
[ 0.000000] BRK [0x0fb32000, 0x0fb32fff] PGTABLE
[ 0.000000] BRK [0x0fb33000, 0x0fb33fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35b7d000-0x36db5fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FEBF0 000024 (v02 DELL )
[ 0.000000] ACPI: XSDT 0x00000000000FCE80 000084 (v01 DELL B10K 00000015 ASL 00000061)
[ 0.000000] ACPI: FACP 0x00000000000FCFA8 0000F4 (v03 DELL B10K 00000015 ASL 00000061)
[ 0.000000] ACPI: DSDT 0x00000000FFE98198 0045F6 (v01 DELL dt_ex 00001000 INTL 20050624)
[ 0.000000] ACPI: FACS 0x000000007DA08C00 000040
[ 0.000000] ACPI: FACS 0x000000007DA08C00 000040
[ 0.000000] ACPI: SSDT 0x00000000FFE9C95B 000088 (v01 DELL st_ex 00001000 INTL 20050624)
[ 0.000000] ACPI: APIC 0x00000000000FD09C 000092 (v01 DELL B10K 00000015 ASL 00000061)
[ 0.000000] ACPI: BOOT 0x00000000000FD12E 000028 (v01 DELL B10K 00000015 ASL 00000061)
[ 0.000000] ACPI: MCFG 0x00000000000FD156 00003E (v01 DELL B10K 00000015 ASL 00000061)
[ 0.000000] ACPI: HPET 0x00000000000FD194 000038 (v01 DELL B10K 00000015 ASL 00000061)
[ 0.000000] ACPI: TCPA 0x00000000000FD3F0 000032 (v01 DELL B10K 00000015 ASL 00000061)
[ 0.000000] ACPI: DMAR 0x00000000000FD422 0000F8 (v01 DELL B10K 00000015 ASL 00000061)
[ 0.000000] ACPI: SLIC 0x00000000000FD1CC 000176 (v01 DELL B10K 00000015 ASL 00000061)
[ 0.000000] ACPI: SSDT 0x000000007DA08C40 00027D (v01 DpgPmm Cpu0Ist 00000011 INTL 20050624)
[ 0.000000] ACPI: SSDT 0x000000007DA09049 00027D (v01 DpgPmm Cpu1Ist 00000011 INTL 20050624)
[ 0.000000] ACPI: SSDT 0x000000007DA09452 000190 (v01 DpgPmm CpuPm 00000010 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007da07fff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x7da03000-0x7da07fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x000000007da07fff]
[ 0.000000] Normal empty
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000007da07fff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007da07fff]
[ 0.000000] On node 0 totalpages: 514470
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7977 pages used for memmap
[ 0.000000] DMA32 zone: 510472 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at 0x000000007e000000-0x000000007fffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 6 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 35 pages/cpu @ffff8af4bd400000 s103512 r8192 d31656 u262144
[ 0.000000] pcpu-alloc: s103512 r8192 d31656 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 506408
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-3-amd64 root=UUID=3443e0d8-0abf-4b5f-8c96-d5202ebe859e ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] WARNING: CPU: 0 PID: 0 at /build/linux-9uDFZV/linux-4.9.30/drivers/iommu/dmar.c:844 warn_invalid_dmar.part.8+0x71/0x80
[ 0.000000] Your BIOS is broken; DMAR reported at address fedc1000 returns all ones!
BIOS vendor: Dell Inc.; Ver: A07; Product Version:
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.9.0-3-amd64 #1 Debian 4.9.30-2+deb9u2
[ 0.000000] Hardware name: Dell Inc. OptiPlex 380 /0HN7XN, BIOS A07 06/13/2012
[ 0.000000] 0000000000000000 ffffffffa2928414 ffffffffa3203dd8 0000000000000000
[ 0.000000] ffffffffa2676ebe 00000000fedc1000 ffffffffa3203e30 ffffffffa352d00c
[ 0.000000] ffffffffa352d048 ffffffffa3203ed8 000000000000008e ffffffffa2676fb7
[ 0.000000] Call Trace:
[ 0.000000] [<ffffffffa2928414>] ? dump_stack+0x5c/0x78
[ 0.000000] [<ffffffffa2676ebe>] ? __warn+0xbe/0xe0
[ 0.000000] [<ffffffffa2676fb7>] ? warn_slowpath_fmt_taint+0x57/0x70
[ 0.000000] [<ffffffffa3354a07>] ? __early_set_fixmap+0x8e/0x91
[ 0.000000] [<ffffffffa336b7a6>] ? __early_ioremap+0x13d/0x1b9
[ 0.000000] [<ffffffffa2a5f661>] ? warn_invalid_dmar.part.8+0x71/0x80
[ 0.000000] [<ffffffffa2bfcbdd>] ? dmar_validate_one_drhd+0x7d/0xd0
[ 0.000000] [<ffffffffa2a5f264>] ? dmar_walk_remapping_entries+0x74/0x180
[ 0.000000] [<ffffffffa3381d95>] ? detect_intel_iommu+0x5b/0xf0
[ 0.000000] [<ffffffffa2bfcb60>] ? xen_swiotlb_init+0x4d0/0x4d0
[ 0.000000] [<ffffffffa3345d3d>] ? pci_iommu_alloc+0x4c/0x67
[ 0.000000] [<ffffffffa335468d>] ? mem_init+0x11/0x93
[ 0.000000] [<ffffffffa3338d3b>] ? start_kernel+0x227/0x463
[ 0.000000] [<ffffffffa3338120>] ? early_idt_handler_array+0x120/0x120
[ 0.000000] [<ffffffffa3338408>] ? x86_64_start_kernel+0x14c/0x170
[ 0.000000] ---[ end trace f68728a0d3053b52 ]---
[ 0.000000] Memory: 1989576K/2057880K available (6187K kernel code, 1137K rwdata, 2856K rodata, 1392K init, 688K bss, 68304K reserved, 0K cma-reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[ 0.000000] NR_IRQS:33024 nr_irqs:488 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2925.949 MHz processor
[ 0.004012] Calibrating delay loop (skipped), value calculated using timer frequency.. 5851.89 BogoMIPS (lpj=11703796)
[ 0.004014] pid_max: default: 32768 minimum: 301
[ 0.004040] ACPI: Core revision 20160831
[ 0.045987] ACPI: 5 ACPI AML tables successfully acquired and loaded
[ 0.046058] Security Framework initialized
[ 0.046060] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.046068] AppArmor: AppArmor disabled by boot time parameter
[ 0.046198] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.047193] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.047669] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.047672] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.048055] CPU: Physical Processor ID: 0
[ 0.048056] CPU: Processor Core ID: 0
[ 0.048058] mce: CPU supports 6 MCE banks
[ 0.048066] CPU0: Thermal monitoring enabled (TM1)
[ 0.048070] process: using mwait in idle threads
[ 0.048076] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.048076] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.048372] Freeing SMP alternatives memory: 24K (ffffffffa347a000 - ffffffffa3480000)
[ 0.050354] ftrace: allocating 25178 entries in 99 pages
[ 0.056117] smpboot: Max logical packages: 4
[ 0.056128] DMAR: Host address width 36
[ 0.056129] DMAR: DRHD base: 0x000000fedc1000 flags: 0x0
[ 0.056140] DMAR: Failed to map dmar0
[ 0.056182] DMAR: Parse DMAR table failure.
[ 0.056553] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.100000] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz (family: 0x6, model: 0x17, stepping: 0xa)
[ 0.100000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.100000] ... version: 2
[ 0.100000] ... bit width: 40
[ 0.100000] ... generic registers: 2
[ 0.100000] ... value mask: 000000ffffffffff
[ 0.100000] ... max period: 000000007fffffff
[ 0.100000] ... fixed-purpose events: 3
[ 0.100000] ... event mask: 0000000700000003
[ 0.100000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.100000] x86: Booting SMP configuration:
[ 0.100000] .... node #0, CPUs: #1
[ 0.178021] x86: Booted up 1 node, 2 CPUs
[ 0.178021] smpboot: Total of 2 processors activated (11703.78 BogoMIPS)
[ 0.178021] devtmpfs: initialized
[ 0.178021] x86/mm: Memory block size: 128MB
[ 0.180460] PM: Registering ACPI NVS region [mem 0x7da08c00-0x7da5cbff] (344064 bytes)
[ 0.180519] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.180532] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.180590] pinctrl core: initialized pinctrl subsystem
[ 0.180706] NET: Registered protocol family 16
[ 0.192006] cpuidle: using governor ladder
[ 0.204004] cpuidle: using governor menu
[ 0.204035] Simple Boot Flag at 0x7a set to 0x1
[ 0.204046] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.204048] ACPI: bus type PCI registered
[ 0.204049] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.204153] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.204155] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.204175] PCI: Using configuration type 1 for base access
[ 0.204183] dmi type 0xB1 record - unknown flag
[ 0.216062] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.216062] ACPI: Added _OSI(Module Device)
[ 0.216062] ACPI: Added _OSI(Processor Device)
[ 0.216062] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.216062] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.239733] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.249520] ACPI: Interpreter enabled
[ 0.249534] ACPI: (supports S0 S1 S4 S5)
[ 0.249535] ACPI: Using IOAPIC for interrupt routing
[ 0.249590] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.321025] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.321025] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.321025] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.324545] PCI host bridge to bus 0000:00
[ 0.324547] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.324549] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.324550] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.324551] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000effff window]
[ 0.324552] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.324553] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfec00000 window]
[ 0.324555] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
[ 0.324556] pci_bus 0000:00: root bus resource [mem 0xff980000-0xff980fff window]
[ 0.324557] pci_bus 0000:00: root bus resource [mem 0xff97c000-0xff97ffff window]
[ 0.324558] pci_bus 0000:00: root bus resource [mem 0xfed20000-0xfed9ffff window]
[ 0.324560] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.324566] pci 0000:00:00.0: [8086:2e30] type 00 class 0x060000
[ 0.324585] DMAR: Forcing write-buffer flush capability
[ 0.324585] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.324857] pci 0000:00:01.0: [8086:2e31] type 01 class 0x060400
[ 0.324888] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.325126] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.325165] pci 0000:00:02.0: [8086:2e32] type 00 class 0x030000
[ 0.325173] pci 0000:00:02.0: reg 0x10: [mem 0xfe800000-0xfebfffff 64bit]
[ 0.325178] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.325182] pci 0000:00:02.0: reg 0x20: [io 0xecd8-0xecdf]
[ 0.328022] pci 0000:00:02.1: [8086:2e33] type 00 class 0x038000
[ 0.328029] pci 0000:00:02.1: reg 0x10: [mem 0xfe700000-0xfe7fffff 64bit]
[ 0.328337] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[ 0.328350] pci 0000:00:1b.0: reg 0x10: [mem 0xfe6fc000-0xfe6fffff 64bit]
[ 0.328409] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.328684] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[ 0.328742] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.328983] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.329028] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[ 0.329061] pci 0000:00:1d.0: reg 0x20: [io 0xff80-0xff9f]
[ 0.329314] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.329353] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[ 0.329386] pci 0000:00:1d.1: reg 0x20: [io 0xff60-0xff7f]
[ 0.329639] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.329678] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[ 0.329710] pci 0000:00:1d.2: reg 0x20: [io 0xff40-0xff5f]
[ 0.329963] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.330003] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[ 0.330035] pci 0000:00:1d.3: reg 0x20: [io 0xff20-0xff3f]
[ 0.330289] pci 0000:00:1d.3: System wakeup disabled by ACPI
[ 0.330334] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[ 0.330348] pci 0000:00:1d.7: reg 0x10: [mem 0xff980000-0xff9803ff]
[ 0.330414] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.330686] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.330957] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.331001] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
[ 0.331069] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.331073] pci 0000:00:1f.0: quirk: [io 0x0880-0x08bf] claimed by ICH6 GPIO
[ 0.331076] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f)
[ 0.331078] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 00e0 (mask 0007)
[ 0.331367] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
[ 0.331377] pci 0000:00:1f.1: reg 0x10: [io 0x01f0-0x01f7]
[ 0.331384] pci 0000:00:1f.1: reg 0x14: [io 0x03f4-0x03f7]
[ 0.331391] pci 0000:00:1f.1: reg 0x18: [io 0x0170-0x0177]
[ 0.331398] pci 0000:00:1f.1: reg 0x1c: [io 0x0374-0x0377]
[ 0.331405] pci 0000:00:1f.1: reg 0x20: [io 0xffa0-0xffaf]
[ 0.331421] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.331422] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.331423] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.331424] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.331692] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
[ 0.331702] pci 0000:00:1f.2: reg 0x10: [io 0xfe00-0xfe07]
[ 0.331708] pci 0000:00:1f.2: reg 0x14: [io 0xfe10-0xfe13]
[ 0.331714] pci 0000:00:1f.2: reg 0x18: [io 0xfe20-0xfe27]
[ 0.331720] pci 0000:00:1f.2: reg 0x1c: [io 0xfe30-0xfe33]
[ 0.331726] pci 0000:00:1f.2: reg 0x20: [io 0xfec0-0xfecf]
[ 0.331755] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.332027] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[ 0.332070] pci 0000:00:1f.3: reg 0x20: [io 0xece0-0xecff]
[ 0.332383] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.332386] pci 0000:00:01.0: bridge window [mem 0xfe500000-0xfe5fffff]
[ 0.332441] pci 0000:02:00.0: [14e4:1692] type 00 class 0x020000
[ 0.332465] pci 0000:02:00.0: reg 0x10: [mem 0xfe4f0000-0xfe4fffff 64bit]
[ 0.332586] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.344019] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.344025] pci 0000:00:1c.0: bridge window [mem 0xfe400000-0xfe4fffff]
[ 0.344120] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
[ 0.344130] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.344132] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.344135] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.344137] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000effff window] (subtractive decode)
[ 0.344139] pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode)
[ 0.344142] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfec00000 window] (subtractive decode)
[ 0.344144] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xdfffffff window] (subtractive decode)
[ 0.344146] pci 0000:00:1e.0: bridge window [mem 0xff980000-0xff980fff window] (subtractive decode)
[ 0.344149] pci 0000:00:1e.0: bridge window [mem 0xff97c000-0xff97ffff window] (subtractive decode)
[ 0.344151] pci 0000:00:1e.0: bridge window [mem 0xfed20000-0xfed9ffff window] (subtractive decode)
[ 0.359277] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[ 0.359692] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[ 0.360419] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[ 0.360866] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[ 0.361283] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 9 10 11 12 15)
[ 0.361754] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 0.362177] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[ 0.362618] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 9 10 11 12 15)
[ 0.363035] ACPI: Enabled 2 GPEs in block 00 to 1F
[ 0.363127] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.363127] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.363127] vgaarb: loaded
[ 0.363127] vgaarb: bridge control possible 0000:00:02.0
[ 0.363127] PCI: Using ACPI for IRQ routing
[ 0.366144] PCI: pci_cache_line_size set to 64 bytes
[ 0.366176] Expanded resource reserved due to conflict with PCI Bus 0000:00
[ 0.366178] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.366178] e820: reserve RAM buffer [mem 0x7da08c00-0x7fffffff]
[ 0.368023] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.368025] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.368028] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.368028] clocksource: Switched to clocksource hpet
[ 0.375660] VFS: Disk quotas dquot_6.6.0
[ 0.375702] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.375811] pnp: PnP ACPI init
[ 0.379230] pnp 00:00: disabling [io 0x0800-0x085f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x0800-0x087f]
[ 0.379232] pnp 00:00: disabling [io 0x0860-0x08ff] because it overlaps 0000:00:1f.0 BAR 13 [io 0x0800-0x087f]
[ 0.379269] system 00:00: [io 0x0c00-0x0c7f] has been reserved
[ 0.379273] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.379441] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.389480] pnp 00:02: [dma 1]
[ 0.390446] pnp 00:02: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.403548] pnp: PnP ACPI: found 3 devices
[ 0.410004] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.410021] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.410023] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[ 0.410033] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.410034] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.410036] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.410037] pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.410046] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.410048] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.410050] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.410053] pci 0000:00:01.0: bridge window [mem 0xfe500000-0xfe5fffff]
[ 0.410056] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.410058] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.410062] pci 0000:00:1c.0: bridge window [mem 0xfe400000-0xfe4fffff]
[ 0.410064] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.410069] pci 0000:00:1e.0: PCI bridge to [bus 03]
[ 0.410077] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.410078] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.410080] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.410081] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000effff window]
[ 0.410082] pci_bus 0000:00: resource 8 [mem 0x000f0000-0x000fffff window]
[ 0.410083] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfec00000 window]
[ 0.410084] pci_bus 0000:00: resource 10 [mem 0x80000000-0xdfffffff window]
[ 0.410085] pci_bus 0000:00: resource 11 [mem 0xff980000-0xff980fff window]
[ 0.410087] pci_bus 0000:00: resource 12 [mem 0xff97c000-0xff97ffff window]
[ 0.410088] pci_bus 0000:00: resource 13 [mem 0xfed20000-0xfed9ffff window]
[ 0.410089] pci_bus 0000:01: resource 1 [mem 0xfe500000-0xfe5fffff]
[ 0.410091] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.410092] pci_bus 0000:02: resource 1 [mem 0xfe400000-0xfe4fffff]
[ 0.410093] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.410094] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window]
[ 0.410095] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window]
[ 0.410097] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.410098] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000effff window]
[ 0.410099] pci_bus 0000:03: resource 8 [mem 0x000f0000-0x000fffff window]
[ 0.410100] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfec00000 window]
[ 0.410101] pci_bus 0000:03: resource 10 [mem 0x80000000-0xdfffffff window]
[ 0.410103] pci_bus 0000:03: resource 11 [mem 0xff980000-0xff980fff window]
[ 0.410104] pci_bus 0000:03: resource 12 [mem 0xff97c000-0xff97ffff window]
[ 0.410105] pci_bus 0000:03: resource 13 [mem 0xfed20000-0xfed9ffff window]
[ 0.410171] NET: Registered protocol family 2
[ 0.410361] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.410425] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.410530] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.410575] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.410589] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.410656] NET: Registered protocol family 1
[ 0.410671] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.412529] PCI: CLS 64 bytes, default 64
[ 0.412579] Unpacking initramfs...
[ 0.715401] Freeing initrd memory: 18660K (ffff8af475b7d000 - ffff8af476db6000)
[ 0.715977] audit: initializing netlink subsys (disabled)
[ 0.716023] audit: type=2000 audit(1500787972.716:1): initialized
[ 0.716422] workingset: timestamp_bits=40 max_order=19 bucket_order=0
[ 0.716446] zbud: loaded
[ 0.717056] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.717081] io scheduler noop registered
[ 0.717082] io scheduler deadline registered
[ 0.717106] io scheduler cfq registered (default)
[ 0.717719] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.717725] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.717738] intel_idle: does not run on family 6 model 23
[ 0.717833] GHES: HEST is not enabled!
[ 0.717888] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.718357] Linux agpgart interface v0.103
[ 0.718462] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 0.718462] AMD IOMMUv2 functionality not available on this system
[ 0.718621] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.721499] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.721503] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.721631] mousedev: PS/2 mouse device common for all mice
[ 0.721675] rtc_cmos 00:01: RTC can wake from S4
[ 0.721780] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.721800] rtc_cmos 00:01: alarms up to one day, 242 bytes nvram, hpet irqs
[ 0.721820] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.722318] NET: Registered protocol family 10
[ 0.722542] mip6: Mobile IPv6
[ 0.722543] NET: Registered protocol family 17
[ 0.722546] mpls_gso: MPLS GSO support
[ 0.722681] microcode: sig=0x1067a, pf=0x1, revision=0xa0b
[ 0.722713] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.722828] registered taskstats version 1
[ 0.722840] zswap: loaded using pool lzo/zbud
[ 0.722912] ima: No TPM chip found, activating TPM-bypass!
[ 0.723107] rtc_cmos 00:01: setting system clock to 2017-07-23 05:32:53 UTC (1500787973)
[ 0.723145] PM: Hibernation image not present or could not be loaded.
[ 0.724534] Freeing unused kernel memory: 1392K (ffffffffa331e000 - ffffffffa347a000)
[ 0.724536] Write protecting the kernel read-only data: 12288k
[ 0.725385] Freeing unused kernel memory: 1988K (ffff8af44f20f000 - ffff8af44f400000)
[ 0.728287] Freeing unused kernel memory: 1240K (ffff8af44f6ca000 - ffff8af44f800000)
[ 0.733280] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.744767] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.744842] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.744850] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.745707] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.745740] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.746770] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.746828] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.747146] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.747201] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.747258] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.765818] ACPI: bus type USB registered
[ 0.765846] usbcore: registered new interface driver usbfs
[ 0.765857] usbcore: registered new interface driver hub
[ 0.765880] usbcore: registered new device driver usb
[ 0.766368] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.766638] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.766936] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.766942] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 0.766949] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 0.766976] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ff80
[ 0.767604] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.767607] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.767608] usb usb1: Product: UHCI Host Controller
[ 0.767609] usb usb1: Manufacturer: Linux 4.9.0-3-amd64 uhci_hcd
[ 0.767610] usb usb1: SerialNumber: 0000:00:1d.0
[ 0.767820] hub 1-0:1.0: USB hub found
[ 0.767949] hub 1-0:1.0: 2 ports detected
[ 0.768520] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.768526] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 0.768532] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 0.768556] uhci_hcd 0000:00:1d.1: irq 22, io base 0x0000ff60
[ 0.768601] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.768602] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.768603] usb usb2: Product: UHCI Host Controller
[ 0.768605] usb usb2: Manufacturer: Linux 4.9.0-3-amd64 uhci_hcd
[ 0.768606] usb usb2: SerialNumber: 0000:00:1d.1
[ 0.768713] hub 2-0:1.0: USB hub found
[ 0.768718] hub 2-0:1.0: 2 ports detected
[ 0.769008] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.769013] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 0.769021] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 0.769043] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
[ 0.769187] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.769189] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.769190] usb usb3: Product: UHCI Host Controller
[ 0.769191] usb usb3: Manufacturer: Linux 4.9.0-3-amd64 uhci_hcd
[ 0.769192] usb usb3: SerialNumber: 0000:00:1d.2
[ 0.769387] hub 3-0:1.0: USB hub found
[ 0.769393] hub 3-0:1.0: 2 ports detected
[ 0.769857] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.769861] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 0.769866] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 0.769888] uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000ff20
[ 0.771186] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.771188] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.771189] usb usb4: Product: UHCI Host Controller
[ 0.771190] usb usb4: Manufacturer: Linux 4.9.0-3-amd64 uhci_hcd
[ 0.771192] usb usb4: SerialNumber: 0000:00:1d.3
[ 0.771309] hub 4-0:1.0: USB hub found
[ 0.771315] hub 4-0:1.0: 2 ports detected
[ 0.772968] pps_core: LinuxPPS API ver. 1 registered
[ 0.772969] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.773149] PTP clock support registered
[ 0.773287] ehci-pci: EHCI PCI platform driver
[ 0.773860] tg3.c:v3.137 (May 11, 2014)
[ 0.773907] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.773913] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 0.773926] ehci-pci 0000:00:1d.7: debug port 1
[ 0.777852] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 0.778130] ehci-pci 0000:00:1d.7: irq 21, io mem 0xff980000
[ 0.781589] SCSI subsystem initialized
[ 0.783682] libata version 3.00 loaded.
[ 0.785286] libphy: tg3 mdio bus: probed
[ 0.792068] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.792140] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.792142] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.792143] usb usb5: Product: EHCI Host Controller
[ 0.792144] usb usb5: Manufacturer: Linux 4.9.0-3-amd64 ehci_hcd
[ 0.792145] usb usb5: SerialNumber: 0000:00:1d.7
[ 0.792369] hub 5-0:1.0: USB hub found
[ 0.792376] hub 5-0:1.0: 8 ports detected
[ 0.820107] hub 1-0:1.0: USB hub found
[ 0.820120] hub 1-0:1.0: 2 ports detected
[ 0.848094] hub 2-0:1.0: USB hub found
[ 0.848108] hub 2-0:1.0: 2 ports detected
[ 0.870305] Broadcom BCM57780 200:01: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=200:01, irq=-1)
[ 0.870544] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM57780) rev 57780001] (PCI Express) MAC address bc:30:5b:ac:fc:f6
[ 0.870546] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 0.870547] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 0.876098] hub 3-0:1.0: USB hub found
[ 0.876112] hub 3-0:1.0: 2 ports detected
[ 0.904091] hub 4-0:1.0: USB hub found
[ 0.904104] hub 4-0:1.0: 2 ports detected
[ 0.904540] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 0.904677] ata_piix 0000:00:1f.1: version 2.13
[ 0.905559] scsi host0: ata_piix
[ 0.905794] scsi host1: ata_piix
[ 0.905846] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 0.905847] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 0.906049] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.906093] ata1: port disabled--ignoring
[ 0.906110] ata2: port disabled--ignoring
[ 1.064386] scsi host2: ata_piix
[ 1.064466] scsi host3: ata_piix
[ 1.064511] ata3: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfec0 irq 20
[ 1.064512] ata4: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfec8 irq 20
[ 1.120016] usb 5-1: new high-speed USB device number 2 using ehci-pci
[ 1.224264] ata4.01: NODEV after polling detection
[ 1.226569] ata4.00: ATAPI: TSSTcorpDVD-ROM TS-H353C, D100, max UDMA/100
[ 1.226687] ata3.00: ATA-8: ST1000VM002-1CT162, SC23, max UDMA/133
[ 1.226690] ata3.00: 1953525168 sectors, multi 8: LBA48 NCQ (depth 0/32)
[ 1.231050] ata4.00: configured for UDMA/100
[ 1.231391] ata3.00: configured for UDMA/133
[ 1.231618] scsi 2:0:0:0: Direct-Access ATA ST1000VM002-1CT1 SC23 PQ: 0 ANSI: 5
[ 1.268798] usb 5-1: New USB device found, idVendor=0409, idProduct=0058
[ 1.268801] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.268803] usb 5-1: Product: USB2.0 Hub Controller
[ 1.268805] usb 5-1: Manufacturer: NEC Corporation
[ 1.268948] hub 5-1:1.0: USB hub found
[ 1.269079] scsi 3:0:0:0: CD-ROM TSSTcorp DVD-ROM TS-H353C D100 PQ: 0 ANSI: 5
[ 1.269111] hub 5-1:1.0: 4 ports detected
[ 1.287051] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.287053] sd 2:0:0:0: [sda] 4096-byte physical blocks
[ 1.287098] sd 2:0:0:0: [sda] Write Protect is off
[ 1.287100] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.287117] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.297735] sr 3:0:0:0: [sr0] scsi3-mmc drive: 1x/8x cd/rw xa/form2 cdda tray
[ 1.297737] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.297925] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 1.333519] sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
[ 1.333995] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.388020] usb 5-2: new high-speed USB device number 3 using ehci-pci
[ 1.552927] usb 5-2: New USB device found, idVendor=0cf3, idProduct=9271
[ 1.552930] usb 5-2: New USB device strings: Mfr=16, Product=32, SerialNumber=48
[ 1.552932] usb 5-2: Product: USB2.0 WLAN
[ 1.552934] usb 5-2: Manufacturer: ATHEROS
[ 1.552936] usb 5-2: SerialNumber: 12345
[ 1.636022] usb 5-1.1: new low-speed USB device number 4 using ehci-pci
[ 1.728015] tsc: Refined TSC clocksource calibration: 2925.981 MHz
[ 1.728019] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2a2d228446b, max_idle_ns: 440795275274 ns
[ 1.741062] random: fast init done
[ 1.748927] usb 5-1.1: New USB device found, idVendor=046d, idProduct=c404
[ 1.748930] usb 5-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.748932] usb 5-1.1: Product: Trackball
[ 1.748934] usb 5-1.1: Manufacturer: Logitech
[ 1.750555] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.755200] usbcore: registered new interface driver usbhid
[ 1.755201] usbhid: USB HID core driver
[ 1.755867] input: Logitech Trackball as /devices/pci0000:00/0000:00:1d.7/usb5/5-1/5-1.1/5-1.1:1.0/0003:046D:C404.0001/input/input3
[ 1.756033] hid-generic 0003:046D:C404.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Trackball] on usb-0000:00:1d.7-1.1/input0
[ 1.848025] usb 5-1.2: new low-speed USB device number 5 using ehci-pci
[ 1.961299] usb 5-1.2: New USB device found, idVendor=0e8f, idProduct=0022
[ 1.961302] usb 5-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.961304] usb 5-1.2: Product: USB KB V11
[ 1.961306] usb 5-1.2: Manufacturer: GASIA
[ 1.964297] input: GASIA USB KB V11 as /devices/pci0000:00/0000:00:1d.7/usb5/5-1/5-1.2/5-1.2:1.0/0003:0E8F:0022.0002/input/input4
[ 2.024298] hid-generic 0003:0E8F:0022.0002: input,hidraw1: USB HID v1.10 Keyboard [GASIA USB KB V11] on usb-0000:00:1d.7-1.2/input0
[ 2.029094] input: GASIA USB KB V11 as /devices/pci0000:00/0000:00:1d.7/usb5/5-1/5-1.2/5-1.2:1.1/0003:0E8F:0022.0003/input/input5
[ 2.088077] hid-generic 0003:0E8F:0022.0003: input,hidraw2: USB HID v1.10 Device [GASIA USB KB V11] on usb-0000:00:1d.7-1.2/input1
[ 2.752075] clocksource: Switched to clocksource tsc
[ 4.064053] floppy0: no floppy controllers found
[ 4.108452] PM: Starting manual resume from disk
[ 4.108455] PM: Hibernation image partition 8:6 present
[ 4.108456] PM: Looking for hibernation image.
[ 4.108693] PM: Image not found (code -22)
[ 4.108695] PM: Hibernation image not present or could not be loaded.
[ 4.332699] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 5.309143] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 5.401021] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 5.401123] systemd[1]: Detected architecture x86-64.
[ 5.410997] systemd[1]: Set hostname to <hercules>.
[ 6.268106] random: crng init done
[ 6.361707] systemd[1]: NetworkManager.service: Cannot add dependency job, ignoring: Unit NetworkManager.service is masked.
[ 6.362277] systemd[1]: Listening on udev Kernel Socket.
[ 6.362348] systemd[1]: Listening on udev Control Socket.
[ 6.362413] systemd[1]: Listening on Journal Audit Socket.
[ 6.362553] systemd[1]: Created slice System Slice.
[ 6.363069] systemd[1]: Mounting POSIX Message Queue File System...
[ 6.363683] systemd[1]: Mounting Huge Pages File System...
[ 6.761508] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 6.935271] RPC: Registered named UNIX socket transport module.
[ 6.935272] RPC: Registered udp transport module.
[ 6.935273] RPC: Registered tcp transport module.
[ 6.935273] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 8.778975] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.785721] wmi: Mapper loaded
[ 8.808407] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
[ 8.808410] ACPI: Power Button [VBTN]
[ 8.808464] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[ 8.808466] ACPI: Power Button [PWRF]
[ 8.853439] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 8.854182] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 8.966113] [drm] Initialized
[ 9.018052] parport_pc 00:02: reported by Plug and Play ACPI
[ 9.018111] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 9.154877] intel_rng: Firmware space is locked read-only. If you can't or
intel_rng: don't want to disable this in firmware setup, and if
intel_rng: you are certain that your system has a functional
intel_rng: RNG, try using the 'no_fwh_detect' option.
[ 9.848643] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000828-0x000000000000082D (\GLBC) (20160831/utaddress-247)
[ 9.848649] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x000000000000082A-0x000000000000082A (\SACT) (20160831/utaddress-247)
[ 9.848652] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000828-0x0000000000000828 (\SSTS) (20160831/utaddress-247)
[ 9.848655] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.848684] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 9.853218] pci 0000:00:00.0: Intel G41 Chipset
[ 9.853231] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 9.853836] pci 0000:00:00.0: detected 32768K stolen memory
[ 9.853861] [drm] Memory usable by graphics device = 2048M
[ 9.853865] [drm] Replacing VGA console driver
[ 9.854496] Console: switching to colour dummy device 80x25
[ 9.862058] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 9.862059] [drm] Driver supports precise vblank timestamp query.
[ 9.862259] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 9.864595] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 9.864932] [drm] RC6 disabled, disabling runtime PM support
[ 9.865203] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[ 9.922284] leds_ss4200: no LED devices found
[ 9.956815] usb 5-2: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested
[ 9.956834] usbcore: registered new interface driver ath9k_htc
[ 10.089408] snd_hda_codec_realtek hdaudioC0D0: ALC269VB: SKU not ready 0x411111f0
[ 10.089924] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VB: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line
[ 10.089925] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
[ 10.089927] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1a/0x0/0x0/0x0/0x0)
[ 10.089928] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 10.089929] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 10.089931] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x19
[ 10.089932] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x18
[ 10.100037] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 10.100695] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 10.100728] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 10.100759] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 10.100791] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 10.159156] fbcon: inteldrmfb (fb0) is primary device
[ 10.165142] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 10.215453] Console: switching to colour frame buffer device 160x64
[ 10.234651] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 10.347657] ppdev: user-space parallel port driver
[ 10.406081] iTCO_vendor_support: vendor-support=0
[ 10.407242] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 10.407277] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[ 10.426580] dell_wmi: Detected Dell WMI interface version 1
[ 10.426644] input: Dell WMI hotkeys as /devices/virtual/input/input14
[ 10.493502] intel_powerclamp: No package C-state available
[ 10.524421] intel_powerclamp: No package C-state available
[ 10.566241] usb 5-2: firmware: direct-loading firmware ath9k_htc/htc_9271-1.4.0.fw
[ 10.595486] Adding 2056188k swap on /dev/sda6. Priority:-1 extents:1 across:2056188k FS
[ 10.845055] usb 5-2: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008
[ 11.096929] ath9k_htc 5-2:1.0: ath9k_htc: HTC initialized with 33 credits
[ 11.361553] ath9k_htc 5-2:1.0: ath9k_htc: FW Version: 1.4
[ 11.361556] ath9k_htc 5-2:1.0: FW RMW support: On
[ 11.361558] ath: EEPROM regdomain: 0x809c
[ 11.361559] ath: EEPROM indicates we should expect a country code
[ 11.361560] ath: doing EEPROM country->regdmn map search
[ 11.361562] ath: country maps to regdmn code: 0x52
[ 11.361563] ath: Country alpha2 being used: CN
[ 11.361564] ath: Regpair used: 0x52
[ 11.410145] ieee80211 phy0: Atheros AR9271 Rev:1
[ 12.000050] floppy0: no floppy controllers found
[ 12.545613] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 12.729394] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[ 12.795105] systemd-journald[189]: Received request to flush runtime journal from PID 1
[ 75.260687] [drm:i965_irq_handler [i915]] *ERROR* CPU pipe A FIFO underrun
--- End Message ---