--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-4.9.0-1-armmp: MMC failure on A20-OLinuXIno-LIME2
- From: Thibaut Girka <thib@sitedethib.com>
- Date: Thu, 23 Feb 2017 11:28:38 +0100
- Message-id: <20170223102838.fe42wjezekbvmfdc@vicious.lan>
Package: linux-image-4.9.0-1-armmp
Severity: normal
I recently switched to linux 4.9.0 (jessie-backport package on one, package
from testing in the other) and latest u-boot on my two A20-OLinuXIno-LIME2
boards, which were running seriously outdated versions of linux until now (4.4
and 4.0).
Both systems have their rootfs on a microSD card, and have had the same issue
after the upgrade: within hours of the boot process, the µSD fails to
read/write with various errors from the mmc subsystem. In one of the systems (I
don't have physical access to the second sytem right now), I have successfully
reverted to linux 4.4, so this isn't a hardware issue or an issue caused by
u-boot.
Although it isn't about the same hardware nor the same version of the kernel,
there is a similar bug report on Fedora's bugtracker, suggesting this is an
upstream problem in the sunxi-mmc driver, but I haven't tried upstream's kernel
without Debian patches yet, nor have I attempted to bisect the issue:
https://bugzilla.redhat.com/show_bug.cgi?id=1419575
Here is a log from one of the two systems (the one that uses the kernel from
testing):
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.9.0-1-armmp (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170124 (Debian 6.3.0-5) ) #1 SMP Debian 4.9.6-3 (2017-01-28)
[ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt:Machine model: Olimex A20-OLinuXino-LIME2
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] cma: Reserved 16 MiB at 0x7f000000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 262144
[ 0.000000] free_area_init_node: node 0, pgdat c0ce0d00, node_mem_map ef6f9000
[ 0.000000] Normal zone: 1728 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 196608 pages, LIFO batch:31
[ 0.000000] HighMem zone: 65536 pages, LIFO batch:15
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: Using PSCI v0.1 Function IDs from DT
[ 0.000000] percpu: Embedded 14 pages/cpu @ef6c1000 s27724 r8192 d21428 u57344
[ 0.000000] pcpu-alloc: s27724 r8192 d21428 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260416
[ 0.000000] Kernel command line: root=/dev/mmcblk0p1 loglevel=7 ro rootwait
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 994060K/1048576K available (7168K kernel code, 957K rwdata, 2212K rodata, 1024K init, 396K bss, 38132K reserved, 16384K cma-reserved, 245760K highmem)
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc0800000 (8160 kB)
.init : 0xc0b00000 - 0xc0c00000 (1024 kB)
.data : 0xc0c00000 - 0xc0cef47c ( 958 kB)
.bss : 0xc0cf1000 - 0xc0d54104 ( 397 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000008] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.000024] Switching to timer-based delay loop, resolution 41ns
[ 0.002773] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[ 0.003660] clocksource: hstimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 12741736309 ns
[ 0.004405] Console: colour dummy device 80x30
[ 0.005264] console [tty0] enabled
[ 0.005314] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000)
[ 0.005366] pid_max: default: 32768 minimum: 301
[ 0.005697] Security Framework initialized
[ 0.005732] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.005794] AppArmor: AppArmor disabled by boot time parameter
[ 0.005915] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.005950] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.007161] CPU: Testing write buffer coherency: ok
[ 0.007263] ftrace: allocating 26622 entries in 79 pages
[ 0.068797] /cpus/cpu@0 missing clock-frequency property
[ 0.068867] /cpus/cpu@1 missing clock-frequency property
[ 0.068897] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.068980] Setting up static identity map for 0x40100000 - 0x40100098
[ 0.074775] EFI services will not be available.
[ 0.086562] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.086792] Brought up 2 CPUs
[ 0.086854] SMP: Total of 2 processors activated (96.00 BogoMIPS).
[ 0.086878] CPU: All CPU(s) started in HYP mode.
[ 0.086897] CPU: Virtualization extensions available.
[ 0.088162] devtmpfs: initialized
[ 0.100333] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4
[ 0.100895] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns
[ 0.101916] pinctrl core: initialized pinctrl subsystem
[ 0.104232] NET: Registered protocol family 16
[ 0.106247] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.109155] No ATAGs?
[ 0.109214] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.109259] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.110306] Serial: AMBA PL011 UART driver
[ 0.145617] reg-fixed-voltage ahci-5v: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/ahci_pwr_pin@1, deferring probe
[ 0.145730] reg-fixed-voltage usb0-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb0_vbus_pin@0, deferring probe
[ 0.145802] reg-fixed-voltage usb1-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe
[ 0.145870] reg-fixed-voltage usb2-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe
[ 0.149797] vgaarb: loaded
[ 0.150941] media: Linux media interface: v0.10
[ 0.151038] Linux video capture interface: v2.00
[ 0.151152] pps_core: LinuxPPS API ver. 1 registered
[ 0.151179] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.151236] PTP clock support registered
[ 0.153479] clocksource: Switched to clocksource arch_sys_counter
[ 0.204610] VFS: Disk quotas dquot_6.6.0
[ 0.204770] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.220776] NET: Registered protocol family 2
[ 0.221816] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.221942] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.222087] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.222205] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.222290] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.222729] NET: Registered protocol family 1
[ 0.222805] PCI: CLS 0 bytes, default 64
[ 0.223668] Unpacking initramfs...
[ 1.455337] Freeing initrd memory: 15204K (c9127000 - ca000000)
[ 1.456168] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
[ 1.458264] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 1.458582] audit: initializing netlink subsys (disabled)
[ 1.458759] audit: type=2000 audit(1.415:1): initialized
[ 1.459693] Initialise system trusted keyrings
[ 1.460344] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ 1.460570] zbud: loaded
[ 1.822970] Key type asymmetric registered
[ 1.823023] Asymmetric key parser 'x509' registered
[ 1.823147] bounce: pool size: 64 pages
[ 1.823318] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 1.823673] io scheduler noop registered
[ 1.823710] io scheduler deadline registered
[ 1.823810] io scheduler cfq registered (default)
[ 1.830149] sun7i-a20-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[ 1.846669] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.869767] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 42, base_baud = 1500000) is a U6_16550A
[ 2.549293] console [ttyS0] enabled
[ 2.553780] Serial: AMBA driver
[ 2.560698] libphy: Fixed MDIO Bus: probed
[ 2.565907] mousedev: PS/2 mouse device common for all mice
[ 2.574066] sunxi-rtc 1c20d00.rtc: rtc core: registered rtc-sunxi as rtc0
[ 2.580935] sunxi-rtc 1c20d00.rtc: RTC enabled
[ 2.588122] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.595152] NET: Registered protocol family 10
[ 2.601045] mip6: Mobile IPv6
[ 2.604157] NET: Registered protocol family 17
[ 2.608660] mpls_gso: MPLS GSO support
[ 2.612524] ThumbEE CPU extension supported.
[ 2.616849] Registering SWP/SWPB emulation handler
[ 2.622792] registered taskstats version 1
[ 2.626981] Loading compiled-in X.509 certificates
[ 2.644424] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
[ 2.654227] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
[ 2.661919] zswap: loaded using pool lzo/zbud
[ 2.677559] sunxi-rtc 1c20d00.rtc: setting system clock to 2017-02-23 09:25:06 UTC (1487841906)
[ 2.686411] sr_init: No PMIC hook to init smartreflex
[ 2.691701] sr_init: platform driver register failed for SR
[ 2.697603] PM: Hibernation image not present or could not be loaded.
[ 2.697793] vcc3v0: disabling
[ 2.700834] vcc3v3: disabling
[ 2.703842] vcc5v0: disabling
[ 2.706825] ahci-5v: disabling
[ 2.709925] usb0-vbus: disabling
[ 2.713167] usb1-vbus: disabling
[ 2.716425] usb2-vbus: disabling
[ 2.721415] Freeing unused kernel memory: 1024K (c0b00000 - c0c00000)
[ 2.816414] systemd-udevd[75]: starting version 215
[ 2.824759] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.970373] sunxi-mmc 1c0f000.mmc: Got CD GPIO
[ 3.003628] SCSI subsystem initialized
[ 3.025652] sunxi-mmc 1c0f000.mmc: base:0xf08cd000 irq:27
[ 3.032937] libata version 3.00 loaded.
[ 3.104651] mmc0: host does not support reading read-only switch, assuming write-enable
[ 3.109627] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP
[ 3.109639] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1
[ 3.109702] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
[ 3.109714] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc
[ 3.135438] scsi host0: ahci-sunxi
[ 3.136039] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 32
[ 3.196263] sun7i-dwmac 1c50000.ethernet: no regulator found
[ 3.210100] sun7i-dwmac 1c50000.ethernet: no reset control found
[ 3.220840] Ring mode enabled
[ 3.224057] DMA HW capability register supported
[ 3.228708] Normal descriptors
[ 3.238805] mmc0: new high speed SDHC card at address aaaa
[ 3.251697] libphy: stmmac: probed
[ 3.252867] mmcblk0: mmc0:aaaa SE16G 14.8 GiB
[ 3.259724] eth%d: PHY ID 001cc912 at 1 IRQ POLL (stmmac-0:01) active
[ 3.267903] mmcblk0: p1
[ 3.362470] random: fast init done
[ 3.470136] ata1: SATA link down (SStatus 0 SControl 300)
[ 3.949193] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.356857] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[ 4.370891] systemd[1]: Detected architecture 'arm'.
[ 4.475419] systemd[1]: Inserted module 'autofs4'
[ 4.482311] systemd[1]: Set hostname to <neiro>.
[ 4.896485] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 4.914774] systemd[1]: Expecting device dev-ttyS0.device...
[ 4.933726] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 4.941958] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 4.949800] systemd[1]: Starting Remote File Systems (Pre).
[ 4.968645] systemd[1]: Reached target Remote File Systems (Pre).
[ 5.888754] systemd-udevd[169]: starting version 215
[ 6.455932] sun4i-ss 1c15000.crypto-engine: no reset control found
[ 6.464079] sun4i-ss 1c15000.crypto-engine: Die ID 0
[ 6.570509] usbcore: registered new interface driver usbfs
[ 6.576263] usbcore: registered new interface driver hub
[ 6.599075] usbcore: registered new device driver usb
[ 6.652173] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.677512] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
[ 6.712943] ehci-platform: EHCI generic platform driver
[ 6.756678] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 6.775757] axp20x-i2c 0-0034: AXP20x variant AXP209 found
[ 6.812931] ohci-platform: OHCI generic platform driver
[ 6.860570] axp20x-i2c 0-0034: AXP20X driver loaded
[ 6.867371] ehci-platform 1c14000.usb: EHCI Host Controller
[ 6.873230] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
[ 6.890057] ehci-platform 1c14000.usb: irq 29, io mem 0x01c14000
[ 6.908645] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
[ 6.917109] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 6.924127] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.931518] usb usb1: Product: EHCI Host Controller
[ 6.936517] usb usb1: Manufacturer: Linux 4.9.0-1-armmp ehci_hcd
[ 6.942687] usb usb1: SerialNumber: 1c14000.usb
[ 6.979537] hub 1-0:1.0: USB hub found
[ 6.989308] hub 1-0:1.0: 1 port detected
[ 7.012371] ohci-platform 1c14400.usb: Generic Platform OHCI controller
[ 7.026868] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 2
[ 7.045483] ohci-platform 1c14400.usb: irq 30, io mem 0x01c14400
[ 7.114937] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 7.121933] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.129287] usb usb2: Product: Generic Platform OHCI controller
[ 7.135308] usb usb2: Manufacturer: Linux 4.9.0-1-armmp ohci_hcd
[ 7.141408] usb usb2: SerialNumber: 1c14400.usb
[ 7.154310] hub 2-0:1.0: USB hub found
[ 7.162303] hub 2-0:1.0: 1 port detected
[ 7.179514] usb_phy_generic.0.auto supply vcc not found, using dummy regulator
[ 7.196290] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[ 7.221855] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 3
[ 7.236211] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 7.243156] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.250466] usb usb3: Product: MUSB HDRC host driver
[ 7.255477] usb usb3: Manufacturer: Linux 4.9.0-1-armmp musb-hcd
[ 7.261522] usb usb3: SerialNumber: musb-hdrc.1.auto
[ 7.270365] hub 3-0:1.0: USB hub found
[ 7.274384] hub 3-0:1.0: 1 port detected
[ 7.301657] ehci-platform 1c1c000.usb: EHCI Host Controller
[ 7.312030] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 4
[ 7.324653] ehci-platform 1c1c000.usb: irq 33, io mem 0x01c1c000
[ 7.348661] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
[ 7.361874] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 7.368879] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.376259] usb usb4: Product: EHCI Host Controller
[ 7.381265] usb usb4: Manufacturer: Linux 4.9.0-1-armmp ehci_hcd
[ 7.387455] usb usb4: SerialNumber: 1c1c000.usb
[ 7.393569] hub 4-0:1.0: USB hub found
[ 7.397532] hub 4-0:1.0: 1 port detected
[ 7.407967] ohci-platform 1c1c400.usb: Generic Platform OHCI controller
[ 7.416530] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 5
[ 7.429601] at24 1-0050: 2048 byte 24c16 EEPROM, writable, 16 bytes/write
[ 7.439481] ohci-platform 1c1c400.usb: irq 34, io mem 0x01c1c400
[ 7.450290] input: axp20x-pek as /devices/platform/soc@01c00000/1c2ac00.i2c/i2c-0/0-0034/axp20x-pek/input/input0
[ 7.461841] EXT4-fs (mmcblk0p1): re-mounted. Opts: errors=remount-ro
[ 7.469233] ldo1: supplied by axp-ipsout
[ 7.474501] ldo2: supplied by axp-ipsout
[ 7.489013] ldo3: supplied by axp-ipsout
[ 7.505612] ldo4: supplied by axp-ipsout
[ 7.508095] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 7.508103] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.508109] usb usb5: Product: Generic Platform OHCI controller
[ 7.508115] usb usb5: Manufacturer: Linux 4.9.0-1-armmp ohci_hcd
[ 7.508120] usb usb5: SerialNumber: 1c1c400.usb
[ 7.509268] hub 5-0:1.0: USB hub found
[ 7.509331] hub 5-0:1.0: 1 port detected
[ 7.550229] dcdc2: supplied by axp-ipsout
[ 7.557026] dcdc3: supplied by axp-ipsout
[ 7.768042] systemd-journald[167]: Received request to flush runtime journal from PID 1
[ 8.073646] usb 5-1: new full-speed USB device number 2 using ohci-platform
[ 8.316755] usb 5-1: New USB device found, idVendor=2341, idProduct=0042
[ 8.323681] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=220
[ 8.331208] usb 5-1: Manufacturer: Arduino (www.arduino.cc)
[ 8.336946] usb 5-1: SerialNumber: 75436343430351209141
[ 8.361066] RX IPC Checksum Offload disabled
[ 8.361075] No MAC Management Counters available
[ 8.361098] sun7i-dwmac 1c50000.ethernet eth0: fail to init PTP.
[ 8.363603] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 8.410225] cdc_acm 5-1:1.0: ttyACM0: USB ACM device
[ 8.417569] usbcore: registered new interface driver cdc_acm
[ 8.423424] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 9.398852] sun7i-dwmac 1c50000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off
[ 9.407348] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 10.926774] Link is Up - 100/Full
[ 14.220587] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 82.739900] random: crng init done
[ 1833.448005] mmc0: Card stuck in programming state! mmc_do_erase
[ 1834.222949] sunxi-mmc 1c0f000.mmc: fatal err update clk timeout
[ 1834.997931] sunxi-mmc 1c0f000.mmc: fatal err update clk timeout
[ 1835.752904] sunxi-mmc 1c0f000.mmc: fatal err update clk timeout
[ 1835.759936] mmc0: tried to reset card, got error -5
[ 1835.764880] blk_update_request: I/O error, dev mmcblk0, sector 4994752
[ 1835.771836] mmcblk0: error -5 sending status command, retrying
[ 1835.777754] mmcblk0: error -5 sending status command, retrying
[ 1835.783652] mmcblk0: error -5 sending status command, aborting
[ 1836.557888] sunxi-mmc 1c0f000.mmc: fatal err update clk timeout
[ 1837.332870] sunxi-mmc 1c0f000.mmc: fatal err update clk timeout
[ 1838.087847] sunxi-mmc 1c0f000.mmc: fatal err update clk timeout
[ 1838.094935] mmc0: tried to reset card, got error -5
[ 1838.099945] blk_update_request: I/O error, dev mmcblk0, sector 4994680
[ 1838.106584] blk_update_request: I/O error, dev mmcblk0, sector 4994688
[ 1838.113180] blk_update_request: I/O error, dev mmcblk0, sector 4994696
[ 1838.119751] blk_update_request: I/O error, dev mmcblk0, sector 4994704
--- End Message ---