--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-4.8.0-0.bpo.2-amd64: Xserve 1, 1 experiencing kernel panic early in boot
- From: Martin Weinelt <hexa@darmstadt.ccc.de>
- Date: Wed, 11 Jan 2017 19:06:40 +0100
- Message-id: <20170111180640.2315.92383.reportbug@hexa.guru>
Package: src:linux
Version: 4.8.11-1~bpo8+1
Severity: important
Dear Maintainer,
I migrated an Apple Xserve 1,1 from Mac OS to Debian. I tried stretch before, which wouldn't
boot at all, but jessie did. So tried the jessie-backports kernel (4.8.11) and it turns out
that it experiences a kernel panic early in boot. In maybe 1 out of 10 cases it succesfully
boots, but mostly it crashes.
The kernel shipped with jessie (3.16) is booting fine, 4.8.x does not, so this is a blocker
for future upgrades on this hardware.
-- Boot log
[ 0.000000] Linux version 4.8.0-0.bpo.2-amd64 (debian-kernel@lists.debian.org) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Debian 4.8.11-1~bpo8+1 (2016-12-14)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.8.0-0.bpo.2-amd64 root=/dev/mapper/hexa--vg-root ro nomodeset console=tty0 console=ttyS0,115200n8
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000bffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000c0000-0x000000007eaa5fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007eaa6000-0x000000007eaa9fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007eaaa000-0x000000007eaaafff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007eaab000-0x000000007eab1fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007eab2000-0x000000007eab3fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007eab4000-0x000000007eac0fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007eac1000-0x000000007eac1fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007eac2000-0x000000007eac7fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007eac8000-0x000000007eacdfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007eace000-0x000000007ead6fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007ead7000-0x000000007eae1fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007eae2000-0x000000007eae2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007eae3000-0x000000007eae3fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007eae4000-0x000000007eae4fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007eae5000-0x000000007eaf6fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007eaf7000-0x000000007eb0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007eb10000-0x000000007ebf8fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ebf9000-0x000000007ec00fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007ec01000-0x000000007ec09fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ec0a000-0x000000007ec0afff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007ec0b000-0x000000007ec10fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ec11000-0x000000007ec11fff] type 20
[ 0.000000] BIOS-e820: [mem 0x000000007ec12000-0x000000007ec12fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007ec13000-0x000000007ec15fff] type 20
[ 0.000000] BIOS-e820: [mem 0x000000007ec16000-0x000000007ec16fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007ec17000-0x000000007ec17fff] type 20
[ 0.000000] BIOS-e820: [mem 0x000000007ec18000-0x000000007ec1afff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ec1b000-0x000000007ec29fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007ec2a000-0x000000007ec33fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ec34000-0x000000007ec34fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007ec35000-0x000000007ec36fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007ec37000-0x000000007ec3bfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ec3c000-0x000000007ec3cfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007ec3d000-0x000000007ec5ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ec60000-0x000000007ece0fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007ece1000-0x000000007ecfffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ed00000-0x000000007ed01fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007ed02000-0x000000007ed49fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ed4a000-0x000000007ed4afff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007ed4b000-0x000000007edbefff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007edbf000-0x000000007edc0fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007edc1000-0x000000007edd4fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007edd5000-0x000000007edd5fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007edd6000-0x000000007edd6fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007edd7000-0x000000007ede1fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007ede2000-0x000000007ee69fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ee6a000-0x000000007ee6afff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007ee6b000-0x000000007ee71fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ee72000-0x000000007ee72fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007ee73000-0x000000007f16ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f170000-0x000000007f171fff] type 20
[ 0.000000] BIOS-e820: [mem 0x000000007f172000-0x000000007f174fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f175000-0x000000007f175fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007f176000-0x000000007f180fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f181000-0x000000007f181fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007f182000-0x000000007f186fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f187000-0x000000007f188fff] type 20
[ 0.000000] BIOS-e820: [mem 0x000000007f189000-0x000000007f18ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f190000-0x000000007f19ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007f1a0000-0x000000007f1abfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f1ac000-0x000000007f1b0fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007f1b1000-0x000000007f1b3fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f1b4000-0x000000007f1b4fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007f1b5000-0x000000007f1befff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f1bf000-0x000000007f1bffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007f1c0000-0x000000007f219fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f21a000-0x000000007f21afff] type 20
[ 0.000000] BIOS-e820: [mem 0x000000007f21b000-0x000000007f22cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007f22d000-0x000000007f245fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f246000-0x000000007f246fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007f247000-0x000000007f247fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f248000-0x000000007f249fff] type 20
[ 0.000000] BIOS-e820: [mem 0x000000007f24a000-0x000000007f24dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f24e000-0x000000007f24efff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007f24f000-0x000000007f24ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f250000-0x000000007f251fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007f252000-0x000000007f266fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f267000-0x000000007f267fff] type 20
[ 0.000000] BIOS-e820: [mem 0x000000007f268000-0x000000007f26bfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f26c000-0x000000007f27cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007f27d000-0x000000007f27dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f27e000-0x000000007f285fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007f286000-0x000000007f288fff] type 20
[ 0.000000] BIOS-e820: [mem 0x000000007f289000-0x000000007f28efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f28f000-0x000000007f28ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007f290000-0x000000007f6bcfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f6bd000-0x000000007f6bdfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007f6be000-0x000000007f6bffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f6c0000-0x000000007f6c4fff] type 20
[ 0.000000] BIOS-e820: [mem 0x000000007f6c5000-0x000000007f6e9fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f6ea000-0x000000007f6eafff] type 20
[ 0.000000] BIOS-e820: [mem 0x000000007f6eb000-0x000000007f6ebfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007f6ec000-0x000000007fbb5fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007fbb6000-0x000000007fbb6fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007fbb7000-0x000000007fbb9fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007fbba000-0x000000007fbbafff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007fbbb000-0x000000007fbfffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007fc00000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff90000-0x00000000fffbffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000037fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v1.10 by Apple
[ 0.000000] efi: UGA=0x7ed4a210 ACPI=0x7f181000 ACPI 2.0=0x7f181014 SMBIOS=0x7f1bf000
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] e820: last_pfn = 0x380000 max_arch_pfn = 0x400000000
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0x7fc00 max_arch_pfn = 0x400000000
[ 0.000000] RAMDISK: [mem 0x35c7a000-0x36e34fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000000007F181014 000024 (v02 APPLE )
[ 0.000000] ACPI: XSDT 0x000000007F1811C0 0000E4 (v01 APPLE Apple00 00000080 01000013)
[ 0.000000] ACPI: ECDT 0x000000007EAE4000 000053 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: FACP 0x000000007EAD5000 0000F4 (v04 APPLE Apple00 00000080 Loki 0000005F)
[ 0.000000] ACPI: DSDT 0x000000007EAC2000 005C26 (v01 APPLE Apple00 00010001 Loki 0000005F)
[ 0.000000] ACPI: FACS 0x000000007EAE2000 000040
[ 0.000000] ACPI: FACS 0x000000007EAE2000 000040
[ 0.000000] ACPI: HPET 0x000000007EAD4000 000038 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: APIC 0x000000007EAD2000 0000BC (v02 APPLE Apple00 00000000 Loki 0000005F)
[ 0.000000] ACPI: MCFG 0x000000007EAD1000 00003C (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: SSDT 0x000000007EAD0000 00008E (v01 PmRef Cpu0Cst 00003001 INTL 20050309)
[ 0.000000] ACPI: SSDT 0x000000007EACF000 000030 (v01 PmRef Cpu0Ist 00003000 INTL 20050309)
[ 0.000000] ACPI: SSDT 0x000000007EACE000 000047 (v01 PmRef Cpu1Cst 00003000 INTL 20050309)
[ 0.000000] ACPI: SSDT 0x000000007EAC0000 000030 (v01 PmRef Cpu1Ist 00003000 INTL 20050309)
[ 0.000000] ACPI: SSDT 0x000000007EABF000 000047 (v01 PmRef Cpu2Cst 00003000 INTL 20050309)
[ 0.000000] ACPI: SSDT 0x000000007EABE000 000030 (v01 PmRef Cpu2Ist 00003000 INTL 20050309)
[ 0.000000] ACPI: SSDT 0x000000007EABD000 000047 (v01 PmRef Cpu3Cst 00003000 INTL 20050309)
[ 0.000000] ACPI: SSDT 0x000000007EABC000 000030 (v01 PmRef Cpu3Ist 00003000 INTL 20050309)
[ 0.000000] ACPI: SSDT 0x000000007EABB000 000047 (v01 PmRef Cpu4Cst 00003000 INTL 20050309)
[ 0.000000] ACPI: SSDT 0x000000007EABA000 000030 (v01 PmRef Cpu4Ist 00003000 INTL 20050309)
[ 0.000000] ACPI: SSDT 0x000000007EAB9000 000047 (v01 PmRef Cpu5Cst 00003000 INTL 20050309)
[ 0.000000] ACPI: SSDT 0x000000007EAB8000 000030 (v01 PmRef Cpu5Ist 00003000 INTL 20050309)
[ 0.000000] ACPI: SSDT 0x000000007EAB7000 000047 (v01 PmRef Cpu6Cst 00003000 INTL 20050309)
[ 0.000000] ACPI: SSDT 0x000000007EAB6000 000030 (v01 PmRef Cpu6Ist 00003000 INTL 20050309)
[ 0.000000] ACPI: SSDT 0x000000007EAB5000 000047 (v01 PmRef Cpu7Cst 00003000 INTL 20050309)
[ 0.000000] ACPI: SSDT 0x000000007EAB4000 000030 (v01 PmRef Cpu7Ist 00003000 INTL 20050309)
[ 0.000000] ACPI: SSDT 0x000000007EAB1000 000CEC (v01 PmRef CpuPm 00003000 INTL 20050309)
[ 0.000000] ACPI: SSDT 0x000000007EAAD000 00018C (v01 PCIRef PciERisr 00001000 INTL 20050309)
[ 0.000000] ACPI: SSDT 0x000000007EAA6000 000062 (v01 PCIRef PciERsr2 00001000 INTL 20050309)
[ 0.000000] ACPI: DMI detected to setup _OSI("Darwin"): Apple hardware
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000037fffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x37fff1000-0x37fff5fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000037fffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000008efff]
[ 0.000000] node 0: [mem 0x0000000000090000-0x000000000009ffff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000007eaa5fff]
[ 0.000000] node 0: [mem 0x000000007eaaa000-0x000000007eaaafff]
[ 0.000000] node 0: [mem 0x000000007eab2000-0x000000007eab3fff]
[ 0.000000] node 0: [mem 0x000000007eac1000-0x000000007eac1fff]
[ 0.000000] node 0: [mem 0x000000007eac8000-0x000000007eacdfff]
[ 0.000000] node 0: [mem 0x000000007ead7000-0x000000007eae1fff]
[ 0.000000] node 0: [mem 0x000000007eae3000-0x000000007eae3fff]
[ 0.000000] node 0: [mem 0x000000007eb10000-0x000000007ebf8fff]
[ 0.000000] node 0: [mem 0x000000007ec01000-0x000000007ec09fff]
[ 0.000000] node 0: [mem 0x000000007ec0b000-0x000000007ec10fff]
[ 0.000000] node 0: [mem 0x000000007ec18000-0x000000007ec1afff]
[ 0.000000] node 0: [mem 0x000000007ec2a000-0x000000007ec33fff]
[ 0.000000] node 0: [mem 0x000000007ec37000-0x000000007ec3bfff]
[ 0.000000] node 0: [mem 0x000000007ec3d000-0x000000007ec5ffff]
[ 0.000000] node 0: [mem 0x000000007ece1000-0x000000007ecfffff]
[ 0.000000] node 0: [mem 0x000000007ed02000-0x000000007ed49fff]
[ 0.000000] node 0: [mem 0x000000007ed4b000-0x000000007edbefff]
[ 0.000000] node 0: [mem 0x000000007edc1000-0x000000007edd4fff]
[ 0.000000] node 0: [mem 0x000000007edd6000-0x000000007edd6fff]
[ 0.000000] node 0: [mem 0x000000007ede2000-0x000000007ee69fff]
[ 0.000000] node 0: [mem 0x000000007ee6b000-0x000000007ee71fff]
[ 0.000000] node 0: [mem 0x000000007ee73000-0x000000007f16ffff]
[ 0.000000] node 0: [mem 0x000000007f172000-0x000000007f174fff]
[ 0.000000] node 0: [mem 0x000000007f176000-0x000000007f180fff]
[ 0.000000] node 0: [mem 0x000000007f182000-0x000000007f186fff]
[ 0.000000] node 0: [mem 0x000000007f189000-0x000000007f18ffff]
[ 0.000000] node 0: [mem 0x000000007f1a0000-0x000000007f1abfff]
[ 0.000000] node 0: [mem 0x000000007f1b1000-0x000000007f1b3fff]
[ 0.000000] node 0: [mem 0x000000007f1b5000-0x000000007f1befff]
[ 0.000000] node 0: [mem 0x000000007f1c0000-0x000000007f219fff]
[ 0.000000] node 0: [mem 0x000000007f22d000-0x000000007f245fff]
[ 0.000000] node 0: [mem 0x000000007f247000-0x000000007f247fff]
[ 0.000000] node 0: [mem 0x000000007f24a000-0x000000007f24dfff]
[ 0.000000] node 0: [mem 0x000000007f24f000-0x000000007f24ffff]
[ 0.000000] node 0: [mem 0x000000007f252000-0x000000007f266fff]
[ 0.000000] node 0: [mem 0x000000007f268000-0x000000007f26bfff]
[ 0.000000] node 0: [mem 0x000000007f27d000-0x000000007f27dfff]
[ 0.000000] node 0: [mem 0x000000007f289000-0x000000007f28efff]
[ 0.000000] node 0: [mem 0x000000007f290000-0x000000007f6bcfff]
[ 0.000000] node 0: [mem 0x000000007f6be000-0x000000007f6bffff]
[ 0.000000] node 0: [mem 0x000000007f6c5000-0x000000007f6e9fff]
[ 0.000000] node 0: [mem 0x000000007f6ec000-0x000000007fbb5fff]
[ 0.000000] node 0: [mem 0x000000007fbb7000-0x000000007fbb9fff]
[ 0.000000] node 0: [mem 0x000000007fbbb000-0x000000007fbfffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000037fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000037fffffff]
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000bffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7eaa6000-0x7eaa9fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7eaab000-0x7eab1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7eab4000-0x7eac0fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7eac2000-0x7eac7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7eace000-0x7ead6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7eae2000-0x7eae2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7eae4000-0x7eae4fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7eae5000-0x7eaf6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7eaf7000-0x7eb0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7ebf9000-0x7ec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7ec0a000-0x7ec0afff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7ec11000-0x7ec11fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7ec12000-0x7ec12fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7ec13000-0x7ec15fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7ec16000-0x7ec16fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7ec17000-0x7ec17fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7ec1b000-0x7ec29fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7ec34000-0x7ec34fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7ec35000-0x7ec36fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7ec3c000-0x7ec3cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7ec60000-0x7ece0fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7ed00000-0x7ed01fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7ed4a000-0x7ed4afff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7edbf000-0x7edc0fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7edd5000-0x7edd5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7edd7000-0x7ede1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7ee6a000-0x7ee6afff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7ee72000-0x7ee72fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7f170000-0x7f171fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7f175000-0x7f175fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7f181000-0x7f181fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7f187000-0x7f188fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7f190000-0x7f19ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7f1ac000-0x7f1b0fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7f1b4000-0x7f1b4fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7f1bf000-0x7f1bffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7f21a000-0x7f21afff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7f21b000-0x7f22cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7f246000-0x7f246fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7f248000-0x7f249fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7f24e000-0x7f24efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7f250000-0x7f251fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7f267000-0x7f267fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7f26c000-0x7f27cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7f27e000-0x7f285fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7f286000-0x7f288fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7f28f000-0x7f28ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7f6bd000-0x7f6bdfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7f6c0000-0x7f6c4fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7f6ea000-0x7f6eafff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7f6eb000-0x7f6ebfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7fbb6000-0x7fbb6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7fbba000-0x7fbbafff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7fc00000-0x7fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x80000000-0xfff8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfff90000-0xfffbffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfffc0000-0xffffffff]
[ 0.000000] e820: [mem 0x80000000-0xfff8ffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 35 pages/cpu @ffff989e7fc00000 s104792 r8192 d30376 u262144
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 3095089
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.8.0-0.bpo.2-amd64 root=/dev/mapper/hexa--vg-root ro nomodeset console=tty0 console=ttyS0,115200n8
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Memory: 12253620K/12576980K available (6114K kernel code, 1235K rwdata, 2840K rodata, 1376K init, 808K bss, 323360K reserved, 0K cma-reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[ 0.000000] NR_IRQS:33024 nr_irqs:488 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2992.298 MHz processor
[ 0.008011] Calibrating delay loop (skipped), value calculated using timer frequency.. 5984.59 BogoMIPS (lpj=11969192)
[ 0.014880] pid_max: default: 32768 minimum: 301
[ 0.016029] ACPI: Core revision 20160422
[ 0.028122] ACPI: 20 ACPI AML tables successfully acquired and loaded
[ 0.032002]
[ 0.036256] BUG: unable to handle kernel paging request at 000000018c03c798
[ 0.040000] IP: [<000000018b6767fd>] 0x18b6767fd
[ 0.040000] PGD 3730c2063 PUD 3730dc063 PMD 0
[ 0.040000] Oops: 0002 [#1] SMP
[ 0.040000] Modules linked in:
[ 0.040000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.8.0-0.bpo.2-amd64 #1 Debian 4.8.11-1~bpo8+1
[ 0.040000] Hardware name: Apple Computer, Inc. Xserve1,1/Mac-F4208AC8, BIOS XS11.88Z.0080.B01.0706271533 06/27/07
[ 0.040000] task: ffffffff8200d540 task.stack: ffffffff82000000
[ 0.040000] RIP: 0010:[<000000018b6767fd>] [<000000018b6767fd>] 0x18b6767fd
[ 0.040000] RSP: 0000:0000000079800fb0 EFLAGS: 00010002
[ 0.040000] RAX: 0000000000000000 RBX: 000000018b676810 RCX: 0000000000000001
[ 0.040000] RDX: 0000000000000030 RSI: ffffffff82006000 RDI: 000000007f6c23ff
[ 0.040000] RBP: 00000003730d4000 R08: 00000003730d4000 R09: ffffffff82006000
[ 0.040000] R10: 00000000000005f8 R11: ffff989e7fff1000 R12: 0000000000000001
[ 0.040000] R13: 0000000000000030 R14: 0000000000002160 R15: 0000000000000206
[ 0.040000] FS: 0000000000000000(0000) GS:ffff989e7fc00000(0000) knlGS:0000000000000000
[ 0.040000] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 0.040000] CR2: 000000018c03c798 CR3: 00000003730c0000 CR4: 00000000000006b0
[ 0.040000] Stack:
[ 0.040000] 0000003000002160 730d400000000001 0000000082006000 0000000000000000
[ 0.040000] 0000000000000000 0000000000000000 0000000000000000 ffffffff816767bc
[ 0.040000] 0000000000000000 000000008b676840 0000000000000000 0000000000000000
[ 0.040000] Call Trace:
[ 0.040000] <UNK>
[ 0.040000] Code: Bad RIP value.
[ 0.040000] RIP [<000000018b6767fd>] 0x18b6767fd
[ 0.040000] RSP <0000000079800fb0>
[ 0.040000] CR2: 000000018c03c798
[ 0.040000] ---[ end trace f68728a0d3053b52 ]---
[ 0.040000] Kernel panic - not syncing: Attempted to kill the idle task!
[ 0.040000] ---[ end Kernel panic - not syncing: Attempted to kill the idle task!
-- Package-specific info:
** Kernel log: boot messages should be attached
** Model information
sys_vendor: Apple Computer, Inc.
product_name: Xserve1,1
product_version: 1.0
chassis_vendor: Apple Computer, Inc.
chassis_version: Mac-F4208AC8
bios_vendor: Apple Computer, Inc.
bios_version: XS11.88Z.0080.B01.0706271533
board_vendor: Apple Computer, Inc.
board_name: Mac-F4208AC8
board_version: PVT
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 5000X Chipset Memory Controller Hub [8086:25c0] (rev 31)
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 0
Capabilities: <access denied>
00:02.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x8 Port 2-3 [8086:25f7] (rev 31) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=01, subordinate=06, sec-latency=0
I/O behind bridge: 00003000-00004fff
Memory behind bridge: 90000000-90afffff
Prefetchable memory behind bridge: 0000000080000000-000000008fffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:03.0 Non-VGA unclassified device [0000]: Intel Corporation 5000 Series Chipset PCI Express x4 Port 3 [8086:25e3] (rev 31)
!!! Invalid class 0000 for header type 01
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:04.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x8 Port 4-5 [8086:25f8] (rev 31) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:05.0 Non-VGA unclassified device [0000]: Intel Corporation 5000 Series Chipset PCI Express x4 Port 5 [8086:25e5] (rev 31)
!!! Invalid class 0000 for header type 01
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:06.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x8 Port 6-7 [8086:25f9] (rev 31) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=0a, subordinate=0c, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: 90d00000-90dfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:07.0 Non-VGA unclassified device [0000]: Intel Corporation 5000 Series Chipset PCI Express x4 Port 7 [8086:25e7] (rev 31)
!!! Invalid class 0000 for header type 01
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Bus: primary=00, secondary=0d, subordinate=0d, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:08.0 System peripheral [0880]: Intel Corporation 5000 Series Chipset DMA Engine [8086:1a38] (rev 31)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 49
Region 0: Memory at 90e04000 (64-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ioatdma
00:10.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset FSB Registers [8086:25f0] (rev 31)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: i5000_edac
00:10.1 Host bridge [0600]: Intel Corporation 5000 Series Chipset FSB Registers [8086:25f0] (rev 31)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:10.2 Host bridge [0600]: Intel Corporation 5000 Series Chipset FSB Registers [8086:25f0] (rev 31)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:11.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset Reserved Registers [8086:25f1] (rev 31)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:13.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset Reserved Registers [8086:25f3] (rev 31)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:15.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset FBD Registers [8086:25f5] (rev 31)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:16.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset FBD Registers [8086:25f6] (rev 31)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:1b.0 Audio device [0403]: Intel Corporation 631xESB/632xESB High Definition Audio Controller [8086:269a] (rev 09)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 50
Region 0: Memory at 90e00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 631xESB/632xESB/3100 Chipset PCI Express Root Port 1 [8086:2690] (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=0e, subordinate=0f, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: 90c00000-90cfffff
Prefetchable memory behind bridge: 0000000090f00000-00000000910fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #1 [8086:2688] (rev 09) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 19
Region 4: I/O ports at 50a0 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #2 [8086:2689] (rev 09) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 20
Region 4: I/O ports at 5080 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #3 [8086:268a] (rev 09) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 21
Region 4: I/O ports at 5060 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #4 [8086:268b] (rev 09) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 22
Region 4: I/O ports at 5040 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset EHCI USB2 Controller [8086:268c] (rev 09) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 19
Region 0: Memory at 90e04800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev d9) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=10, subordinate=10, sec-latency=32
Memory behind bridge: 90b00000-90bfffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 631xESB/632xESB/3100 Chipset LPC Interface Controller [8086:2670] (rev 09)
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel driver in use: lpc_ich
00:1f.1 IDE interface [0101]: Intel Corporation 631xESB/632xESB IDE Controller [8086:269e] (rev 09) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: I/O ports at 50e8 [size=8]
Region 1: I/O ports at 50fc [size=4]
Region 2: I/O ports at 50e0 [size=8]
Region 3: I/O ports at 50f8 [size=4]
Region 4: I/O ports at 50c0 [size=16]
Kernel driver in use: ata_piix
00:1f.2 SATA controller [0106]: Intel Corporation 631xESB/632xESB SATA AHCI Controller [8086:2681] (rev 09) (prog-if 01 [AHCI 1.0])
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 0: I/O ports at 50d8 [size=8]
Region 1: I/O ports at 50f4 [size=4]
Region 2: I/O ports at 50d0 [size=8]
Region 3: I/O ports at 50f0 [size=4]
Region 4: I/O ports at 5020 [size=32]
Region 5: Memory at 90e04400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 631xESB/632xESB/3100 Chipset SMBus Controller [8086:269b] (rev 09)
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 5000 [size=32]
01:00.0 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express Upstream Port [8086:3500] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=01, secondary=02, subordinate=05, sec-latency=0
I/O behind bridge: 00003000-00004fff
Memory behind bridge: 90000000-909fffff
Prefetchable memory behind bridge: 0000000080000000-000000008fffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
01:00.1 PIC [0800]: Intel Corporation 6311ESB/6321ESB I/OxAPIC Interrupt Controller [8086:3504] (rev 01) (prog-if 20 [IO(X)-APIC])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: Memory at 90a00000 (32-bit, non-prefetchable) [disabled] [size=4K]
Capabilities: <access denied>
01:00.3 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express to PCI-X Bridge [8086:350c] (rev 01) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Bus: primary=01, secondary=06, subordinate=06, sec-latency=64
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
02:00.0 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E1 [8086:3510] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=02, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: 90900000-909fffff
Prefetchable memory behind bridge: 0000000080000000-000000008fffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
02:01.0 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E2 [8086:3514] (rev 01) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=02, secondary=04, subordinate=04, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
02:02.0 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E3 [8086:3518] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=02, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: 90000000-908fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
03:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RV515 [Radeon X1300/X1550] [1002:7146] (prog-if 00 [VGA controller])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RV515 [Radeon X1300/X1550] [1002:7146]
Physical Slot: 4
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 0
Region 0: Memory at 80000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at 4000 [size=256]
Region 2: Memory at 90920000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at 90900000 [disabled] [size=128K]
Capabilities: <access denied>
05:00.0 Ethernet controller [0200]: Intel Corporation 80003ES2LAN Gigabit Ethernet Controller (Copper) [8086:1096] (rev 01)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 47
Region 0: Memory at 90820000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at 90400000 (32-bit, non-prefetchable) [size=4M]
Region 2: I/O ports at 3020 [size=32]
Expansion ROM at 90850000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: e1000e
05:00.1 Ethernet controller [0200]: Intel Corporation 80003ES2LAN Gigabit Ethernet Controller (Copper) [8086:1096] (rev 01)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin B routed to IRQ 48
Region 0: Memory at 90800000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at 90000000 (32-bit, non-prefetchable) [size=4M]
Region 2: I/O ports at 3000 [size=32]
Expansion ROM at 90860000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: e1000e
05:00.2 IDE interface [0101]: Intel Corporation 631xESB/632xESB IDE Redirection [8086:1084] (rev 01) (prog-if 85 [Master SecO PriO])
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin D routed to IRQ 0
Region 0: I/O ports at 3058 [disabled] [size=8]
Region 1: I/O ports at 306c [disabled] [size=4]
Region 2: I/O ports at 3050 [disabled] [size=8]
Region 3: I/O ports at 3068 [disabled] [size=4]
Region 4: I/O ports at 3040 [disabled] [size=16]
Expansion ROM at 90870000 [disabled] [size=64K]
Capabilities: <access denied>
05:00.4 IPMI SMIC interface [0c07]: Intel Corporation 631xESB/632xESB IPMI/KCS0 [8086:1086] (rev 01) (prog-if 01)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 0
Region 0: Memory at 90841000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 3064 [disabled] [size=4]
Capabilities: <access denied>
05:00.7 IPMI SMIC interface [0c07]: Intel Corporation 631xESB/632xESB BT [8086:1089] (rev 01) (prog-if 02)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin D routed to IRQ 0
Region 0: Memory at 90840000 (32-bit, non-prefetchable) [disabled] [size=4K]
Region 1: I/O ports at 3060 [disabled] [size=4]
Capabilities: <access denied>
0a:00.0 PCI bridge [0604]: Intel Corporation 41210 [Lanai] Serial to Parallel PCI Bridge (A-Segment Bridge) [8086:0340] (rev 09) (prog-if 00 [Normal decode])
Physical Slot: 1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=0a, secondary=0b, subordinate=0b, sec-latency=64
I/O behind bridge: 00002000-00002fff
Memory behind bridge: 90d00000-90dfffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
0a:00.2 PCI bridge [0604]: Intel Corporation 41210 [Lanai] Serial to Parallel PCI Bridge (B-Segment Bridge) [8086:0341] (rev 09) (prog-if 00 [Normal decode])
Physical Slot: 1
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Bus: primary=0a, secondary=0c, subordinate=0c, sec-latency=64
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
0b:04.0 Fibre Channel [0c04]: LSI Logic / Symbios Logic FC929X Fibre Channel Adapter [1000:0626] (rev 81)
Subsystem: LSI Logic / Symbios Logic Device [1000:1170]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (16000ns min, 2500ns max), Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 2100 [disabled] [size=256]
Region 1: Memory at 90d00000 (64-bit, non-prefetchable) [size=64K]
Region 3: Memory at 90d10000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: mptfc
0b:04.1 Fibre Channel [0c04]: LSI Logic / Symbios Logic FC929X Fibre Channel Adapter [1000:0626] (rev 81)
Subsystem: LSI Logic / Symbios Logic Device [1000:1170]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (16000ns min, 2500ns max), Cache Line Size: 256 bytes
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 2000 [disabled] [size=256]
Region 1: Memory at 90d20000 (64-bit, non-prefetchable) [size=64K]
Region 3: Memory at 90d30000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: mptfc
0e:00.0 PCI bridge [0604]: Intel Corporation 6702PXH PCI Express-to-PCI Bridge A [8086:032c] (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=0e, secondary=0f, subordinate=0f, sec-latency=64
I/O behind bridge: 00001000-00001fff
Memory behind bridge: 90c00000-90cfffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
0f:02.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic SAS1064 PCI-X Fusion-MPT SAS [1000:0050] (rev 02)
Subsystem: LSI Logic / Symbios Logic Device [1000:1000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (16000ns min, 2500ns max), Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 1000 [disabled] [size=256]
Region 1: Memory at 90c10000 (64-bit, non-prefetchable) [size=16K]
Region 3: Memory at 90c00000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: mptsas
10:0b.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB82AA2 IEEE-1394b Link Layer Controller [104c:8025] (rev 01) (prog-if 10 [OHCI])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 248 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at 90b04000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at 90b00000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 05ac:8261 Apple, Inc.
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 04d9:1818 Holtek Semiconductor, Inc.
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: 8.6
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 3.16.0-4-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-4.8.0-0.bpo.2-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.120+deb8u2
ii kmod 18-3
ii linux-base 4.3~bpo8+1
Versions of packages linux-image-4.8.0-0.bpo.2-amd64 recommends:
ii firmware-linux-free 3.3
ii irqbalance 1.1.0-2~bpo8+1
Versions of packages linux-image-4.8.0-0.bpo.2-amd64 suggests:
pn debian-kernel-handbook <none>
pn grub-pc | grub-efi-amd64 | extlinux <none>
pn linux-doc-4.8 <none>
Versions of packages linux-image-4.8.0-0.bpo.2-amd64 is related to:
pn firmware-amd-graphics <none>
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
pn firmware-misc-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
--- End Message ---