[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#849640: marked as done (linux-image-4.8.0-0.bpo.2-amd64: The display comes up black with the 4.8.11 kernel on intel graphics, skylake processor)



Your message dated Sun, 23 May 2021 20:39:48 +0200
with message-id <E1lkt0o-0005xC-3F@hullmann.westfalen.local>
and subject line Closing this bug
has caused the Debian Bug report #849640,
regarding linux-image-4.8.0-0.bpo.2-amd64: The display comes up black with the 4.8.11 kernel on intel graphics, skylake processor
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
849640: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=849640
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: src:linux
Version: 4.8.11-1~bpo8+1
Severity: important

Dear Maintainer,

*** Reporter, please consider answering these questions, where appropriate ***

   * What led up to the situation?

"apt-get dist-upgrade" pulled in a new kernel and after the reboot the display was completely black.

   * What exactly did you do (or not do) that was effective (or
     ineffective)?

I tried rebooting into the old kernel, i.e. linux-image-4.7.0-0.bpo.1-amd64-unsigned,
with version 4.7.8-1~bpo8+1.

   * What was the outcome of this action?

X started and I could log into the desktop.

   * What outcome did you expect instead?

I got the outcome I hoped for.

*** End of the template - remove these template lines ***


-- Package-specific info:
** Version:
Linux version 4.8.0-0.bpo.2-amd64 (debian-kernel@lists.debian.org) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Debian 4.8.11-1~bpo8+1 (2016-12-14)

** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.8.0-0.bpo.2-amd64 root=UUID=4f2282c8-852b-464d-8248-9de131d7494d ro quiet

** Tainted: E (8192)
 * Unsigned module has been loaded.

** Kernel log:
[    2.564155] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    2.564176] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    2.564176] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.564177] usb usb2: Product: xHCI Host Controller
[    2.564177] usb usb2: Manufacturer: Linux 4.8.0-0.bpo.2-amd64 xhci-hcd
[    2.564178] usb usb2: SerialNumber: 0000:00:14.0
[    2.564435] hub 2-0:1.0: USB hub found
[    2.564444] hub 2-0:1.0: 8 ports detected
[    2.569685] [drm] Memory usable by graphics device = 4096M
[    2.569687] checking generic (c0000000 300000) vs hw (c0000000 10000000)
[    2.569687] fb: switching to inteldrmfb from EFI VGA
[    2.569707] Console: switching to colour dummy device 80x25
[    2.569736] [drm] Replacing VGA console driver
[    2.575857] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.575857] [drm] Driver supports precise vblank timestamp query.
[    2.582474] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.584534] i915 0000:00:02.0: firmware: direct-loading firmware i915/skl_dmc_ver1_26.bin
[    2.584902] [drm] Finished loading i915/skl_dmc_ver1_26.bin (v1.26)
[    2.588583] [drm] GuC firmware load skipped
[    2.591652] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.591712] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[    2.596796] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    2.596800] [drm] Initialized i915 1.6.0 20160711 for 0000:00:02.0 on minor 0
[    2.600821] fbcon: inteldrmfb (fb0) is primary device
[    2.888028] usb 1-2: new high-speed USB device number 2 using xhci_hcd
[    3.028324] usb 1-2: New USB device found, idVendor=0409, idProduct=005a
[    3.028327] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.028996] hub 1-2:1.0: USB hub found
[    3.029030] hub 1-2:1.0: 4 ports detected
[    3.315635] [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[    3.326510] [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[    3.337380] [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[    3.348281] [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[    3.359139] [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[    3.369999] [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[    3.380815] [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[    3.381017] [drm:intel_dp_start_link_train [i915]] *ERROR* failed to train DP, aborting
[    3.439403] Console: switching to colour frame buffer device 200x75
[    3.461040] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    3.478439] random: crng init done
[    3.501332] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[    3.503152] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    3.503157] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    3.503161] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    3.503163] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    3.503166] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x11/0x0
[    3.503168] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    3.503171] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[    3.503174] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[    3.503177] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[    3.523842] systemd-journald[898]: Received request to flush runtime journal from PID 1
[    3.525927] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
[    3.526085] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[    3.526221] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[    3.526358] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[    3.530122] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[    3.530285] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[    3.556871] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
[    3.811175] input: ImPS/2 BYD TouchPad as /devices/platform/i8042/serio1/input/input6
[    3.843991] [drm] RC6 on
[    3.904949] RPC: Registered named UNIX socket transport module.
[    3.904952] RPC: Registered udp transport module.
[    3.904953] RPC: Registered tcp transport module.
[    3.904955] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    3.910529] FS-Cache: Loaded
[    3.920988] FS-Cache: Netfs 'nfs' registered for caching
[    3.932201] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    4.402714] device-mapper: uevent: version 1.0.3
[    4.402910] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[    4.429387] loop: module loaded
[    5.032030] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    5.037953] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[    5.041317] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
[    5.048038] ip_tables: (C) 2000-2006 Netfilter Core Team
[    6.120272] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[    6.120279] e1000e 0000:00:1f.6 eth0: 10/100 speed: disabling TSO
[    6.944334] [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[    6.955738] [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[    6.967140] [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[    6.978293] [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[    6.989226] [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[    7.000104] [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[    7.010945] [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[    7.011123] [drm:intel_dp_start_link_train [i915]] *ERROR* failed to train DP, aborting
[12964.888790] [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[12964.899662] [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[12964.910477] [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[12964.921312] [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[12964.932139] [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[12964.942976] [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[12964.953801] [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[12964.953991] [drm:intel_dp_start_link_train [i915]] *ERROR* failed to train DP, aborting
[12965.967269] [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[12965.978098] [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[12965.988930] [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[12965.999818] [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[12966.010691] [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[12966.021511] [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[12966.032336] [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[12966.032514] [drm:intel_dp_start_link_train [i915]] *ERROR* failed to train DP, aborting

** Model information
sys_vendor: System manufacturer
product_name: System Product Name
product_version: System Version
chassis_vendor: Default string
chassis_version: Default string
bios_vendor: American Megatrends Inc.
bios_version: 0407
board_vendor: ASUSTeK COMPUTER INC.
board_name: H170M-PLUS
board_version: Rev X.0x

** Loaded modules:
xt_addrtype(E)
xt_conntrack(E)
ipt_MASQUERADE(E)
nf_nat_masquerade_ipv4(E)
iptable_nat(E)
nf_conntrack_ipv4(E)
nf_defrag_ipv4(E)
nf_nat_ipv4(E)
iptable_filter(E)
ip_tables(E)
x_tables(E)
nf_nat(E)
nf_conntrack(E)
bridge(E)
stp(E)
llc(E)
dm_thin_pool(E)
dm_persistent_data(E)
dm_bio_prison(E)
dm_bufio(E)
libcrc32c(E)
crc32c_generic(E)
loop(E)
dm_mod(E)
cfg80211(E)
cpufreq_powersave(E)
cpufreq_userspace(E)
cpufreq_conservative(E)
nfsd(E)
auth_rpcgss(E)
nfs_acl(E)
nfs(E)
lockd(E)
grace(E)
fscache(E)
sunrpc(E)
snd_hda_codec_hdmi(E)
snd_hda_codec_realtek(E)
snd_hda_codec_generic(E)
nls_ascii(E)
nls_cp437(E)
vfat(E)
fat(E)
iTCO_wdt(E)
iTCO_vendor_support(E)
eeepc_wmi(E)
asus_wmi(E)
sparse_keymap(E)
mxm_wmi(E)
intel_rapl(E)
x86_pkg_temp_thermal(E)
coretemp(E)
kvm(E)
irqbypass(E)
crct10dif_pclmul(E)
efi_pstore(E)
evdev(E)
crc32_pclmul(E)
psmouse(E)
i915(E)
snd_hda_intel(E)
ghash_clmulni_intel(E)
snd_hda_codec(E)
serio_raw(E)
pcspkr(E)
efivars(E)
xhci_pci(E)
drm_kms_helper(E)
sg(E)
snd_hda_core(E)
hci_uart(E)
xhci_hcd(E)
e1000e(E)
btbcm(E)
btqca(E)
btintel(E)
i2c_i801(E)
ptp(E)
snd_hwdep(E)
pps_core(E)
snd_pcm(E)
i2c_smbus(E)
snd_timer(E)
bluetooth(E)
usbcore(E)
snd(E)
drm(E)
soundcore(E)
usb_common(E)
i2c_algo_bit(E)
mei_me(E)
shpchp(E)
battery(E)
mei(E)
rfkill(E)
i2c_hid(E)
hid(E)
wmi(E)
video(E)
intel_lpss_acpi(E)
intel_lpss(E)
mfd_core(E)
acpi_pad(E)
fjes(E)
acpi_als(E)
button(E)
kfifo_buf(E)
industrialio(E)
tpm_tis(E)
tpm_tis_core(E)
tpm(E)
fuse(E)
parport_pc(E)
ppdev(E)
lp(E)
parport(E)
efivarfs(E)
autofs4(E)
ext4(E)
crc16(E)
jbd2(E)
fscrypto(E)
mbcache(E)
sd_mod(E)
crc32c_intel(E)
aesni_intel(E)
aes_x86_64(E)
glue_helper(E)
lrw(E)
gf128mul(E)
ablk_helper(E)
cryptd(E)
ahci(E)
libahci(E)
libata(E)
scsi_mod(E)
fan(E)
thermal(E)

** Network interface configuration:

source /etc/network/interfaces.d/*

auto lo
iface lo inet loopback

** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether f8:32:e4:9b:ba:4b brd ff:ff:ff:ff:ff:ff
    inet 10.10.10.7/24 brd 10.10.10.255 scope global dynamic eth0
       valid_lft 13015sec preferred_lft 13015sec
    inet6 fe80::fa32:e4ff:fe9b:ba4b/64 scope link 
       valid_lft forever preferred_lft forever
3: docker0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default qlen 1000
    link/ether 56:84:7a:fe:97:99 brd ff:ff:ff:ff:ff:ff
    inet 172.17.42.1/16 scope global docker0
       valid_lft forever preferred_lft forever

*** Device statistics:
Inter-|   Receive                                                |  Transmit
 face |bytes    packets errs drop fifo frame compressed multicast|bytes    packets errs drop fifo colls carrier compressed
  eth0: 1577593   12432    0    0    0     0          0      1086   260960    2085    0    0    0     0       0          0
    lo: 4636505   57994    0    0    0     0          0         0  4636505   57994    0    0    0     0       0          0
docker0:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0

*** Protocol statistics:
Ip:
    35791 total packets received
    0 forwarded
    0 incoming packets discarded
    35790 incoming packets delivered
    28541 requests sent out
    48 dropped because of missing route
Icmp:
    0 ICMP messages received
    0 input ICMP message failed.
    ICMP input histogram:
    15 ICMP messages sent
    0 ICMP messages failed
    ICMP output histogram:
        destination unreachable: 15
IcmpMsg:
        OutType3: 15
Tcp:
    26957 active connections openings
    1 passive connection openings
    26944 failed connection attempts
    1 connection resets received
    0 connections established
    54193 segments received
    54194 segments send out
    0 segments retransmited
    0 bad segments received.
    26961 resets sent
Udp:
    2070 packets received
    15 packets to unknown port received.
    0 packet receive errors
    1284 packets sent
    IgnoredMulti: 6453
UdpLite:
TcpExt:
    10 TCP sockets finished time wait in fast timer
    10 delayed acks sent
    9 packets directly queued to recvmsg prequeue.
    1 bytes directly received in process context from prequeue
    131 packet headers predicted
    50 acknowledgments not containing data payload received
    76 predicted acknowledgments
    1 connections reset due to early user close
    TCPRcvCoalesce: 11
    TCPAutoCorking: 8
    TCPOrigDataSent: 179
IpExt:
    InNoRoutes: 1
    InMcastPkts: 661
    OutMcastPkts: 32
    InBcastPkts: 6659
    OutBcastPkts: 2
    InOctets: 2462390
    OutOctets: 1547738
    InMcastOctets: 101968
    OutMcastOctets: 6100
    InBcastOctets: 807089
    OutBcastOctets: 108
    InNoECTPkts: 35796


** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Device [8086:191f] (rev 07)
	Subsystem: ASUSTeK Computer Inc. Device [1043:8694]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: [e0] Vendor Specific Information: Len=10 <?>
	Kernel driver in use: skl_uncore

00:01.0 PCI bridge [0604]: Intel Corporation Device [8086:1901] (rev 07) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [88] Subsystem: ASUSTeK Computer Inc. Device [1043:8694]
	Capabilities: [80] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
		Address: fee0f00c  Data: 4161
	Capabilities: [a0] Express (v2) Root Port (Slot+), MSI 00
		DevCap:	MaxPayload 256 bytes, PhantFunc 0
			ExtTag- RBE+
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 256 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #2, Speed 8GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <1us, L1 <8us
			ClockPM- Surprise- LLActRep- BwNot+
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
			Slot #1, PowerLimit 75.000W; Interlock- NoCompl+
		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
			Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
			Changed: MRL- PresDet- LinkState-
		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
		RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
		DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR+, OBFF Via WAKE# ARIFwd-
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR+, OBFF Via WAKE# ARIFwd-
		LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
			 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
	Capabilities: [100 v1] Virtual Channel
		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
		Arb:	Fixed- WRR32- WRR64- WRR128-
		Ctrl:	ArbSelect=Fixed
		Status:	InProgress-
		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
			Arb:	Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
			Status:	NegoPending+ InProgress-
	Capabilities: [140 v1] Root Complex Link
		Desc:	PortNumber=02 ComponentID=01 EltType=Config
		Link0:	Desc:	TargetPort=00 TargetComponent=01 AssocRCRB- LinkType=MemMapped LinkValid+
			Addr:	00000000fed19000
	Capabilities: [d94 v1] #19
	Kernel driver in use: pcieport

00:02.0 VGA compatible controller [0300]: Intel Corporation Device [8086:1912] (rev 06) (prog-if 00 [VGA controller])
	Subsystem: ASUSTeK Computer Inc. Device [1043:8694]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 125
	Region 0: Memory at de000000 (64-bit, non-prefetchable) [size=16M]
	Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M]
	Region 4: I/O ports at f000 [size=64]
	[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
	Capabilities: [40] Vendor Specific Information: Len=0c <?>
	Capabilities: [70] Express (v2) Root Complex Integrated Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0
			ExtTag- RBE+
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
	Capabilities: [ac] MSI: Enable+ Count=1/1 Maskable- 64bit-
		Address: fee0800c  Data: 41b1
	Capabilities: [d0] Power Management version 2
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [100 v1] #1b
	Capabilities: [200 v1] Address Translation Service (ATS)
		ATSCap:	Invalidate Queue Depth: 00
		ATSCtl:	Enable-, Smallest Translation Unit: 00
	Capabilities: [300 v1] #13
	Kernel driver in use: i915

00:14.0 USB controller [0c03]: Intel Corporation Device [8086:a12f] (rev 31) (prog-if 30 [XHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:8694]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 124
	Region 0: Memory at df030000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: [70] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [80] MSI: Enable+ Count=1/8 Maskable- 64bit+
		Address: 00000000fee0f00c  Data: 41a1
	Kernel driver in use: xhci_hcd

00:16.0 Communication controller [0780]: Intel Corporation Device [8086:a13a] (rev 31)
	Subsystem: ASUSTeK Computer Inc. Device [1043:8694]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 122
	Region 0: Memory at df04d000 (64-bit, non-prefetchable) [size=4K]
	Capabilities: [50] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable- 64bit+
		Address: 00000000fee0f00c  Data: 4181
	Kernel driver in use: mei_me

00:17.0 SATA controller [0106]: Intel Corporation Device [8086:a102] (rev 31) (prog-if 01 [AHCI 1.0])
	Subsystem: ASUSTeK Computer Inc. Device [1043:8694]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 121
	Region 0: Memory at df048000 (32-bit, non-prefetchable) [size=8K]
	Region 1: Memory at df04c000 (32-bit, non-prefetchable) [size=256]
	Region 2: I/O ports at f090 [size=8]
	Region 3: I/O ports at f080 [size=4]
	Region 4: I/O ports at f060 [size=32]
	Region 5: Memory at df04b000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
		Address: fee0800c  Data: 4171
	Capabilities: [70] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
	Kernel driver in use: ahci

00:1d.0 PCI bridge [0604]: Intel Corporation Device [8086:a118] (rev f1) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: 00002000-00002fff
	Memory behind bridge: ab000000-ab1fffff
	Prefetchable memory behind bridge: 00000000ab200000-00000000ab3fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
		DevCap:	MaxPayload 256 bytes, PhantFunc 0
			ExtTag- RBE+
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
		LnkCap:	Port #9, Speed 8GT/s, Width x4, ASPM L0s L1, Exit Latency L0s <1us, L1 <4us
			ClockPM- Surprise- LLActRep+ BwNot+
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
			Slot #0, PowerLimit 0.000W; Interlock- NoCompl+
		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
			Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
			Changed: MRL- PresDet- LinkState-
		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
		RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
		DevCap2: Completion Timeout: Range ABC, TimeoutDis+, LTR+, OBFF Via WAKE# ARIFwd+
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
		LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
			 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
	Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
		Address: 00000000  Data: 0000
	Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device [1043:8694]
	Capabilities: [a0] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: pcieport

00:1f.0 ISA bridge [0601]: Intel Corporation Device [8086:a144] (rev 31)
	Subsystem: ASUSTeK Computer Inc. Device [1043:8694]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0

00:1f.2 Memory controller [0580]: Intel Corporation Device [8086:a121] (rev 31)
	Subsystem: ASUSTeK Computer Inc. Device [1043:8694]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Region 0: Memory at df044000 (32-bit, non-prefetchable) [disabled] [size=16K]

00:1f.3 Audio device [0403]: Intel Corporation Device [8086:a170] (rev 31)
	Subsystem: ASUSTeK Computer Inc. Device [1043:86c7]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32
	Interrupt: pin A routed to IRQ 126
	Region 0: Memory at df040000 (64-bit, non-prefetchable) [size=16K]
	Region 4: Memory at df020000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: [50] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
		Address: 00000000fee0e00c  Data: 41c1
	Kernel driver in use: snd_hda_intel

00:1f.4 SMBus [0c05]: Intel Corporation Device [8086:a123] (rev 31)
	Subsystem: ASUSTeK Computer Inc. Device [1043:8694]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at df04a000 (64-bit, non-prefetchable) [size=256]
	Region 4: I/O ports at f040 [size=32]
	Kernel driver in use: i801_smbus

00:1f.6 Ethernet controller [0200]: Intel Corporation Ethernet Connection (2) I219-V [8086:15b8] (rev 31)
	Subsystem: ASUSTeK Computer Inc. Device [1043:8672]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 123
	Region 0: Memory at df000000 (32-bit, non-prefetchable) [size=128K]
	Capabilities: [c8] Power Management version 3
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-
	Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
		Address: 00000000fee0200c  Data: 41e1
	Capabilities: [e0] PCI Advanced Features
		AFCap: TP+ FLR+
		AFCtrl: FLR-
		AFStatus: TP-
	Kernel driver in use: e1000e


** USB devices:
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 0409:005a NEC Corp. HighSpeed Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: 8.6
  APT prefers stable-updates
  APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)

Kernel: Linux 4.8.0-0.bpo.2-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages linux-image-4.8.0-0.bpo.2-amd64 depends on:
ii  initramfs-tools [linux-initramfs-tool]  0.120+deb8u2
ii  kmod                                    18-3
ii  linux-base                              4.3~bpo8+1

Versions of packages linux-image-4.8.0-0.bpo.2-amd64 recommends:
ii  firmware-linux-free  3.3
ii  irqbalance           1.1.0-2~bpo8+1

Versions of packages linux-image-4.8.0-0.bpo.2-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  grub-efi-amd64          2.02~beta2-22+deb8u1
pn  linux-doc-4.8           <none>

Versions of packages linux-image-4.8.0-0.bpo.2-amd64 is related to:
ii  firmware-amd-graphics     20160824-1~bpo8+1
pn  firmware-atheros          <none>
pn  firmware-bnx2             <none>
pn  firmware-bnx2x            <none>
pn  firmware-brcm80211        <none>
pn  firmware-cavium           <none>
pn  firmware-intel-sound      <none>
pn  firmware-intelwimax       <none>
pn  firmware-ipw2x00          <none>
pn  firmware-ivtv             <none>
pn  firmware-iwlwifi          <none>
pn  firmware-libertas         <none>
ii  firmware-linux-nonfree    20160824-1~bpo8+1
ii  firmware-misc-nonfree     20160824-1~bpo8+1
pn  firmware-myricom          <none>
pn  firmware-netxen           <none>
pn  firmware-qlogic           <none>
pn  firmware-realtek          <none>
pn  firmware-samsung          <none>
pn  firmware-siano            <none>
pn  firmware-ti-connectivity  <none>
pn  xen-hypervisor            <none>

-- no debconf information

--- End Message ---
--- Begin Message ---
This bug was filed for a very old kernel. If you can reproduce it with
- the current version in unstable/testing
- the latest kernel from buster.backports
please reopen the bug, see https://www.debian.org/Bugs/server-control

--- End Message ---

Reply to: