[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#891565: marked as done (kernel upgrade related to causing link failure at eth0 and wlp2s0)



Your message dated Sun, 23 May 2021 05:10:51 -0700 (PDT)
with message-id <60aa464b.1c69fb81.43477.dc3a@mx.google.com>
and subject line Closing this bug (BTS maintenance for src:linux bugs)
has caused the Debian Bug report #891565,
regarding kernel upgrade related to causing link failure at eth0 and wlp2s0
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
891565: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=891565
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: linux-image-4.15.0-1-amd64
Version: 4.15.4-1

i am unable to connect to network because of link problem for
my wired and wireless connection related.
Things work fine with linux-image-4.9.0-4-amd64  package
i use  libc6:amd64  2.26-6  amd64   GNU C Library: Shared libraries
i useuster/sid
a portion of dmesg output is show below. typical full dmesg output is attached


[  500.056159] ------------[ cut here ]------------
[  500.056162] rtl8723be: error H2C cmd because of Fw download fail!!!
[  500.056198] WARNING: CPU: 0 PID: 22 at /build/linux-PFKtCE/linux-4.15.4/drivers/net/wireless/realtek/rtlwifi/rtl8723be/fw.c:227 rtl8723be_fill_h2c_cmd+0x103/0x440 [rtl8723be]
$

--
software engineer
rajagiri school of engineering and technology
[    0.000000] Linux version 4.15.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 7.3.0 (Debian 7.3.0-3)) #1 SMP Debian 4.15.4-1 (2018-02-18)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-1-amd64 root=UUID=a054425d-89dc-4d7a-a928-e5a87f57dc8d ro quiet
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000075a76fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000075a77000-0x0000000075e76fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000075e77000-0x0000000076f76fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000076f77000-0x0000000076fb6fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x0000000076fb7000-0x0000000077ffffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007bc00000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000feafffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed03000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed09fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fedbffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] random: fast init done
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: HP HP Notebook/80C5, BIOS F.1E 12/25/2015
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   1 base 0FFA00000 mask FFFE00000 write-protect
[    0.000000]   2 base 000000000 mask F80000000 write-back
[    0.000000]   3 base 07C000000 mask FFC000000 uncachable
[    0.000000]   4 base 07BC00000 mask FFFC00000 uncachable
[    0.000000]   5 base 100000000 mask F80000000 write-back
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] e820: last_pfn = 0x78000 max_arch_pfn = 0x400000000
[    0.000000] Base memory trampoline at [        (ptrval)] 98000 size 24576
[    0.000000] BRK [0x14e01d000, 0x14e01dfff] PGTABLE
[    0.000000] BRK [0x14e01e000, 0x14e01efff] PGTABLE
[    0.000000] BRK [0x14e01f000, 0x14e01ffff] PGTABLE
[    0.000000] BRK [0x14e020000, 0x14e020fff] PGTABLE
[    0.000000] BRK [0x14e021000, 0x14e021fff] PGTABLE
[    0.000000] BRK [0x14e022000, 0x14e022fff] PGTABLE
[    0.000000] BRK [0x14e023000, 0x14e023fff] PGTABLE
[    0.000000] BRK [0x14e024000, 0x14e024fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x3537b000-0x369b4fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 HPQOEM)
[    0.000000] ACPI: XSDT 0x0000000076FB6120 0000A4 (v01 HPQOEM SLIC-MPC 00000003 HP   01000013)
[    0.000000] ACPI: FACP 0x0000000076FAA000 00010C (v05 HPQOEM SLIC-MPC 00000003 HP   00040000)
[    0.000000] ACPI: DSDT 0x0000000076F9C000 00A70D (v02 HPQOEM SLIC-MPC 00000003 ACPI 00040000)
[    0.000000] ACPI: FACS 0x0000000076F72000 000040
[    0.000000] ACPI: TCPA 0x0000000076FB5000 000032 (v02 HPQOEM INSYDE   00000000 HP   00040000)
[    0.000000] ACPI: UEFI 0x0000000076FB4000 000236 (v01 HPQOEM INSYDE   00000001 HP   00040000)
[    0.000000] ACPI: MSDM 0x0000000076FB3000 000055 (v03 HPQOEM SLIC-MPC 00000001 HP   00040000)
[    0.000000] ACPI: UEFI 0x0000000076FB2000 000042 (v01 HPQOEM INSYDE   00000000 HP   00040000)
[    0.000000] ACPI: SSDT 0x0000000076FAB000 0066C3 (v01 HPQOEM INSYDE   00001000 ACPI 00040000)
[    0.000000] ACPI: MCFG 0x0000000076FA8000 00003C (v01 HPQOEM INSYDE   00000003 HP   00040000)
[    0.000000] ACPI: SSDT 0x0000000076FA7000 0005F4 (v01 HPQOEM CpuDptf  00000003 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x0000000076F9B000 0009F8 (v01 HPQOEM DptfTab  00000003 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x0000000076F9A000 000763 (v01 HPQOEM INSYDE   00003000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x0000000076F99000 000290 (v01 HPQOEM INSYDE   00003000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x0000000076F98000 00017A (v01 HPQOEM INSYDE   00003000 ACPI 00040000)
[    0.000000] ACPI: APIC 0x0000000076FA9000 000084 (v03 HPQOEM SLIC-MPC 00000003 HP   00040000)
[    0.000000] ACPI: SSDT 0x0000000076F97000 000432 (v01 HPQOEM INSYDE   00001000 ACPI 00040000)
[    0.000000] ACPI: TPM2 0x0000000076F96000 000034 (v03 HPQOEM INSYDE   00000000 HP   00040000)
[    0.000000] ACPI: FPDT 0x0000000076F95000 000044 (v01 HPQOEM SLIC-MPC 00000002 HP   00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000017fffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x17fffa000-0x17fffefff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000017fffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020200000-0x0000000075a76fff]
[    0.000000]   node   0: [mem 0x0000000076fb7000-0x0000000077ffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000017fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000017fffffff]
[    0.000000] On node 0 totalpages: 1009757
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7523 pages used for memmap
[    0.000000]   DMA32 zone: 481472 pages, LIFO batch:31
[    0.000000]   Normal zone: 8192 pages used for memmap
[    0.000000]   Normal zone: 524288 pages, LIFO batch:31
[    0.000000] Reserved but unavailable: 99 pages
[    0.000000] Reserving Intel graphics memory at 0x000000007c800000-0x000000007e7fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-114
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x75a77000-0x75e76fff]
[    0.000000] PM: Registered nosave memory: [mem 0x75e77000-0x76f76fff]
[    0.000000] PM: Registered nosave memory: [mem 0x76f77000-0x76fb6fff]
[    0.000000] PM: Registered nosave memory: [mem 0x78000000-0x7bbfffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7bc00000-0x7fffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x80000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xe3ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe4000000-0xfe9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfea00000-0xfeafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed02000-0xfed02fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed03000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed07fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed09fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed0a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1cfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1d000-0xfed7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfedbffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfedc0000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
[    0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 44 pages/cpu @        (ptrval) s141976 r8192 d30056 u524288
[    0.000000] pcpu-alloc: s141976 r8192 d30056 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 993957
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-1-amd64 root=UUID=a054425d-89dc-4d7a-a928-e5a87f57dc8d ro quiet
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3863252K/4039028K available (10252K kernel code, 1165K rwdata, 3084K rodata, 1508K init, 692K bss, 175776K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 29506 entries in 116 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 33024, nr_irqs: 1024, preallocated irqs: 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20170831
[    0.000000] ACPI: 8 ACPI AML tables successfully acquired and loaded
[    0.004000] APIC: Switch to symmetric I/O mode setup
[    0.004000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.024000] tsc: Detected 1600.000 MHz processor
[    0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.00 BogoMIPS (lpj=6400000)
[    0.024000] pid_max: default: 32768 minimum: 301
[    0.024000] Security Framework initialized
[    0.024000] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.024000] AppArmor: AppArmor initialized
[    0.024000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.024000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.024000] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.024000] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.024000] CPU: Physical Processor ID: 0
[    0.024000] CPU: Processor Core ID: 0
[    0.024000] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.024000] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.024000] mce: CPU supports 6 MCE banks
[    0.024000] CPU0: Thermal monitoring enabled (TM1)
[    0.024000] process: using mwait in idle threads
[    0.024000] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[    0.024000] Last level dTLB entries: 4KB 256, 2MB 16, 4MB 16, 1GB 0
[    0.024000] Spectre V2 : Mitigation: Full generic retpoline
[    0.028066] Freeing SMP alternatives memory: 28K
[    0.032232] TSC deadline timer enabled
[    0.032238] smpboot: CPU0: Intel(R) Celeron(R) CPU  N3050  @ 1.60GHz (family: 0x6, model: 0x4c, stepping: 0x3)
[    0.032456] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver.
[    0.032480] ... version:                3
[    0.032482] ... bit width:              40
[    0.032483] ... generic registers:      2
[    0.032485] ... value mask:             000000ffffffffff
[    0.032486] ... max period:             0000007fffffffff
[    0.032487] ... fixed-purpose events:   3
[    0.032489] ... event mask:             0000000700000003
[    0.032579] Hierarchical SRCU implementation.
[    0.034061] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.034124] smp: Bringing up secondary CPUs ...
[    0.034432] x86: Booting SMP configuration:
[    0.034435] .... node  #0, CPUs:      #1
[    0.034686] smp: Brought up 1 node, 2 CPUs
[    0.034686] smpboot: Max logical packages: 2
[    0.034686] smpboot: Total of 2 processors activated (6400.00 BogoMIPS)
[    0.036338] devtmpfs: initialized
[    0.036338] x86/mm: Memory block size: 128MB
[    0.037183] PM: Registering ACPI NVS region [mem 0x75e77000-0x76f76fff] (17825792 bytes)
[    0.037183] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.037183] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.037183] pinctrl core: initialized pinctrl subsystem
[    0.037324] NET: Registered protocol family 16
[    0.037495] audit: initializing netlink subsys (disabled)
[    0.037560] audit: type=2000 audit(1519660210.036:1): state=initialized audit_enabled=0 res=1
[    0.037560] cpuidle: using governor ladder
[    0.037560] cpuidle: using governor menu
[    0.037560] ACPI: bus type PCI registered
[    0.037560] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.037560] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[    0.037560] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
[    0.037560] PCI: Using configuration type 1 for base access
[    0.041737] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.041737] ACPI: Added _OSI(Module Device)
[    0.041737] ACPI: Added _OSI(Processor Device)
[    0.041737] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.041737] ACPI: Added _OSI(Processor Aggregator Device)
[    0.055768] ACPI: Dynamic OEM Table Load:
[    0.055786] ACPI: SSDT 0xFFFF8831FA99E800 000634 (v01 PmRef  Cpu0Ist  00003000 INTL 20130117)
[    0.056319] ACPI: Dynamic OEM Table Load:
[    0.056331] ACPI: SSDT 0xFFFF8831FA9FFC00 0003A5 (v01 PmRef  Cpu0Cst  00003001 INTL 20130117)
[    0.057293] ACPI: Dynamic OEM Table Load:
[    0.057304] ACPI: SSDT 0xFFFF8831FAA5CA00 00015F (v01 PmRef  ApIst    00003000 INTL 20130117)
[    0.057764] ACPI: Dynamic OEM Table Load:
[    0.057775] ACPI: SSDT 0xFFFF8831FAA3DB40 00008D (v01 PmRef  ApCst    00003000 INTL 20130117)
[    0.058768] ACPI: EC: EC started
[    0.058770] ACPI: EC: interrupt blocked
[    0.059666] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[    0.059671] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.059674] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[    0.059675] ACPI: Interpreter enabled
[    0.059726] ACPI: (supports S0 S3 S4 S5)
[    0.059729] ACPI: Using IOAPIC for interrupt routing
[    0.059801] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.060503] ACPI: Enabled 8 GPEs in block 00 to 3F
[    0.076762] ACPI: Power Resource [USBC] (on)
[    0.083173] ACPI: Power Resource [CLK0] (on)
[    0.083269] ACPI: Power Resource [CLK1] (on)
[    0.087763] ACPI: Power Resource [ID3C] (off)
[    0.094441] ACPI: Power Resource [FN00] (off)
[    0.095564] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.095576] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.095668] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.095695] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.096382] PCI host bridge to bus 0000:00
[    0.096388] pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
[    0.096391] pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
[    0.096395] pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
[    0.096398] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.096401] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.096404] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.096407] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[    0.096410] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
[    0.096414] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.096429] pci 0000:00:00.0: [8086:2280] type 00 class 0x060000
[    0.096697] pci 0000:00:02.0: [8086:22b1] type 00 class 0x030000
[    0.096724] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit]
[    0.096738] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
[    0.096748] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
[    0.096972] pci 0000:00:0b.0: [8086:22dc] type 00 class 0x118000
[    0.096999] pci 0000:00:0b.0: reg 0x10: [mem 0x91514000-0x91514fff 64bit]
[    0.097236] pci 0000:00:13.0: [8086:22a3] type 00 class 0x010601
[    0.097303] pci 0000:00:13.0: reg 0x20: [io  0x3060-0x307f]
[    0.097316] pci 0000:00:13.0: reg 0x24: [mem 0x91515000-0x915157ff]
[    0.097382] pci 0000:00:13.0: PME# supported from D3hot
[    0.097606] pci 0000:00:14.0: [8086:22b5] type 00 class 0x0c0330
[    0.097644] pci 0000:00:14.0: reg 0x10: [mem 0x91500000-0x9150ffff 64bit]
[    0.097745] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.097954] pci 0000:00:1a.0: [8086:2298] type 00 class 0x108000
[    0.097983] pci 0000:00:1a.0: reg 0x10: [mem 0x91400000-0x914fffff]
[    0.097996] pci 0000:00:1a.0: reg 0x14: [mem 0x91300000-0x913fffff]
[    0.098088] pci 0000:00:1a.0: PME# supported from D0 D3hot
[    0.098269] pci 0000:00:1b.0: [8086:2284] type 00 class 0x040300
[    0.098306] pci 0000:00:1b.0: reg 0x10: [mem 0x91510000-0x91513fff 64bit]
[    0.098411] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.098585] pci 0000:00:1c.0: [8086:22c8] type 01 class 0x060400
[    0.098702] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.098891] pci 0000:00:1c.2: [8086:22cc] type 01 class 0x060400
[    0.099010] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.099196] pci 0000:00:1c.3: [8086:22ce] type 01 class 0x060400
[    0.099315] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.099513] pci 0000:00:1f.0: [8086:229c] type 00 class 0x060100
[    0.099807] pci 0000:00:1f.3: [8086:2292] type 00 class 0x0c0500
[    0.099878] pci 0000:00:1f.3: reg 0x10: [mem 0x91516000-0x9151601f]
[    0.099995] pci 0000:00:1f.3: reg 0x20: [io  0x3040-0x305f]
[    0.100408] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.100595] pci 0000:02:00.0: [10ec:b723] type 00 class 0x028000
[    0.100703] pci 0000:02:00.0: reg 0x10: [io  0x2000-0x20ff]
[    0.100801] pci 0000:02:00.0: reg 0x18: [mem 0x91200000-0x91203fff 64bit]
[    0.101097] pci 0000:02:00.0: supports D1 D2
[    0.101100] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.112102] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.112109] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    0.112115] pci 0000:00:1c.2:   bridge window [mem 0x91200000-0x912fffff]
[    0.112245] pci 0000:03:00.0: [10ec:8136] type 00 class 0x020000
[    0.112290] pci 0000:03:00.0: reg 0x10: [io  0x1000-0x10ff]
[    0.112330] pci 0000:03:00.0: reg 0x18: [mem 0x91100000-0x91100fff 64bit]
[    0.112355] pci 0000:03:00.0: reg 0x20: [mem 0x91000000-0x91003fff 64bit pref]
[    0.112493] pci 0000:03:00.0: supports D1 D2
[    0.112496] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.124036] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.124043] pci 0000:00:1c.3:   bridge window [io  0x1000-0x1fff]
[    0.124049] pci 0000:00:1c.3:   bridge window [mem 0x91100000-0x911fffff]
[    0.124057] pci 0000:00:1c.3:   bridge window [mem 0x91000000-0x910fffff 64bit pref]
[    0.132586] acpi 80862288:00: Device [PWM1] is in always present list
[    0.134110] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7
[    0.134266] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.134413] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *7
[    0.134558] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.134702] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.134846] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.134990] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.135133] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.135232] acpi INT0002:00: Device [GPED] is in always present list
[    0.136248] ACPI: EC: interrupt unblocked
[    0.136273] ACPI: EC: event unblocked
[    0.136286] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.136289] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.136475] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.136475] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.136475] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.136475] vgaarb: loaded
[    0.136475] EDAC MC: Ver: 3.0.0
[    0.136475] PCI: Using ACPI for IRQ routing
[    0.138661] PCI: pci_cache_line_size set to 64 bytes
[    0.138831] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[    0.138834] e820: reserve RAM buffer [mem 0x75a77000-0x77ffffff]
[    0.140153] clocksource: Switched to clocksource refined-jiffies
[    0.163389] VFS: Disk quotas dquot_6.6.0
[    0.163433] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.163670] AppArmor: AppArmor Filesystem Enabled
[    0.163722] pnp: PnP ACPI init
[    0.163933] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.163944] system 00:00: [io  0x0400-0x047f] has been reserved
[    0.163947] system 00:00: [io  0x0500-0x05fe] has been reserved
[    0.163960] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.164148] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.164229] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.164300] pnp 00:03: Plug and Play ACPI device, IDs SYN1efb PNP0f13 (active)
[    0.174246] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.174437] system 00:05: [mem 0xe0000000-0xefffffff] could not be reserved
[    0.174442] system 00:05: [mem 0xfea00000-0xfeafffff] has been reserved
[    0.174446] system 00:05: [mem 0xfed01000-0xfed01fff] has been reserved
[    0.174449] system 00:05: [mem 0xfed03000-0xfed03fff] has been reserved
[    0.174452] system 00:05: [mem 0xfed06000-0xfed06fff] has been reserved
[    0.174456] system 00:05: [mem 0xfed08000-0xfed09fff] has been reserved
[    0.174459] system 00:05: [mem 0xfed80000-0xfedbffff] has been reserved
[    0.174463] system 00:05: [mem 0xfed1c000-0xfed1cfff] has been reserved
[    0.174466] system 00:05: [mem 0xfedf0000-0xfedf0fff] has been reserved
[    0.174470] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.174480] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.174802] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.175164] pnp: PnP ACPI: found 7 devices
[    0.185301] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.185339] clocksource: Switched to clocksource acpi_pm
[    0.185371] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[    0.185377] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[    0.185382] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[    0.185419] pci 0000:00:1c.0: BAR 14: assigned [mem 0x91600000-0x917fffff]
[    0.185430] pci 0000:00:1c.0: BAR 15: assigned [mem 0x91800000-0x919fffff 64bit pref]
[    0.185437] pci 0000:00:1c.0: BAR 13: assigned [io  0x4000-0x4fff]
[    0.185443] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.185448] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    0.185455] pci 0000:00:1c.0:   bridge window [mem 0x91600000-0x917fffff]
[    0.185462] pci 0000:00:1c.0:   bridge window [mem 0x91800000-0x919fffff 64bit pref]
[    0.185471] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.185475] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    0.185482] pci 0000:00:1c.2:   bridge window [mem 0x91200000-0x912fffff]
[    0.185495] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.185499] pci 0000:00:1c.3:   bridge window [io  0x1000-0x1fff]
[    0.185506] pci 0000:00:1c.3:   bridge window [mem 0x91100000-0x911fffff]
[    0.185512] pci 0000:00:1c.3:   bridge window [mem 0x91000000-0x910fffff 64bit pref]
[    0.185521] pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
[    0.185525] pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
[    0.185528] pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]
[    0.185530] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.185534] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.185537] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.185540] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[    0.185543] pci_bus 0000:00: resource 11 [mem 0x80000000-0xdfffffff window]
[    0.185546] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
[    0.185549] pci_bus 0000:01: resource 1 [mem 0x91600000-0x917fffff]
[    0.185552] pci_bus 0000:01: resource 2 [mem 0x91800000-0x919fffff 64bit pref]
[    0.185555] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.185558] pci_bus 0000:02: resource 1 [mem 0x91200000-0x912fffff]
[    0.185561] pci_bus 0000:03: resource 0 [io  0x1000-0x1fff]
[    0.185564] pci_bus 0000:03: resource 1 [mem 0x91100000-0x911fffff]
[    0.185567] pci_bus 0000:03: resource 2 [mem 0x91000000-0x910fffff 64bit pref]
[    0.185813] NET: Registered protocol family 2
[    0.186143] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.186305] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.186495] TCP: Hash tables configured (established 32768 bind 32768)
[    0.186610] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.186656] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.186816] NET: Registered protocol family 1
[    0.186855] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.189410] PCI: CLS 64 bytes, default 64
[    0.189533] Unpacking initramfs...
[    0.978609] Freeing initrd memory: 22760K
[    0.978760] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.978778] software IO TLB [mem 0x71a77000-0x75a77000] (64MB) mapped at [0000000012a5d536-00000000c1731ed3]
[    0.978918] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x171024fa93b, max_idle_ns: 440795253189 ns
[    0.978966] clocksource: Switched to clocksource tsc
[    0.982105] Initialise system trusted keyrings
[    0.982349] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[    0.989506] zbud: loaded
[    1.916501] Key type asymmetric registered
[    1.916508] Asymmetric key parser 'x509' registered
[    1.916701] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.916866] io scheduler noop registered
[    1.916873] io scheduler deadline registered
[    1.917161] io scheduler cfq registered (default)
[    1.917169] io scheduler mq-deadline registered
[    1.919074] intel_idle: MWAIT substates: 0x33000020
[    1.919082] intel_idle: v0.4.1 model 0x4C
[    1.919393] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.927767] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.948499] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.950293] Linux agpgart interface v0.103
[    1.950823] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.950830] AMD IOMMUv2 functionality not available on this system
[    1.952126] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.973886] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.973918] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.974633] mousedev: PS/2 mouse device common for all mice
[    1.974893] rtc_cmos 00:06: RTC can wake from S4
[    1.975282] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    1.975356] rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram
[    1.975409] intel_pstate: Intel P-state driver initializing
[    1.975979] ledtrig-cpu: registered to indicate activity on CPUs
[    1.979519] NET: Registered protocol family 10
[    1.986208] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.002326] Segment Routing with IPv6
[    2.002414] mip6: Mobile IPv6
[    2.002425] NET: Registered protocol family 17
[    2.002440] mpls_gso: MPLS GSO support
[    2.003192] microcode: sig=0x406c3, pf=0x1, revision=0x353
[    2.003386] microcode: Microcode Update Driver: v2.2.
[    2.003424] sched_clock: Marking stable (2002818846, 0)->(1981728263, 21090583)
[    2.004446] registered taskstats version 1
[    2.004450] Loading compiled-in X.509 certificates
[    2.105923] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
[    2.106057] zswap: loaded using pool lzo/zbud
[    2.106556] AppArmor: AppArmor sha1 policy hashing enabled
[    2.106571] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    2.108471] rtc_cmos 00:06: setting system clock to 2018-02-26 15:50:12 UTC (1519660212)
[    2.125691] Freeing unused kernel memory: 1508K
[    2.125696] Write protecting the kernel read-only data: 16384k
[    2.127565] Freeing unused kernel memory: 2012K
[    2.132532] Freeing unused kernel memory: 1012K
[    2.142198] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    2.142199] x86/mm: Checking user space page tables
[    2.151712] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    2.383267] SCSI subsystem initialized
[    2.389252] libata version 3.00 loaded.
[    2.391515] ahci 0000:00:13.0: version 3.0
[    2.393404] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    2.393427] ACPI: bus type USB registered
[    2.393477] usbcore: registered new interface driver usbfs
[    2.393499] usbcore: registered new interface driver hub
[    2.393549] usbcore: registered new device driver usb
[    2.393606] thermal LNXTHERM:00: registered as thermal_zone0
[    2.393608] ACPI: Thermal Zone [TZ01] (27 C)
[    2.393789] thermal LNXTHERM:01: registered as thermal_zone1
[    2.393791] ACPI: Thermal Zone [TZ02] (28 C)
[    2.398047] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.398069] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    2.398754] r8169 0000:03:00.0 eth0: RTL8106e at 0x00000000fd925965, 70:5a:0f:b9:d8:5c, XID 04900000 IRQ 116
[    2.402151] ahci 0000:00:13.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    2.402157] ahci 0000:00:13.0: flags: 64bit ncq led clo only pio slum part deso sadm apst 
[    2.404092] scsi host0: ahci
[    2.411525] scsi host1: ahci
[    2.411646] ata1: SATA max UDMA/133 abar m2048@0x91515000 port 0x91515100 irq 115
[    2.411650] ata2: SATA max UDMA/133 abar m2048@0x91515000 port 0x91515180 irq 115
[    2.412140] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    2.412151] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    2.413318] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x01509810
[    2.413326] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    2.413643] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.413646] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.413648] usb usb1: Product: xHCI Host Controller
[    2.413650] usb usb1: Manufacturer: Linux 4.15.0-1-amd64 xhci-hcd
[    2.413652] usb usb1: SerialNumber: 0000:00:14.0
[    2.413892] hub 1-0:1.0: USB hub found
[    2.413921] hub 1-0:1.0: 7 ports detected
[    2.414730] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    2.414741] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    2.414819] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    2.414822] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.414824] usb usb2: Product: xHCI Host Controller
[    2.414826] usb usb2: Manufacturer: Linux 4.15.0-1-amd64 xhci-hcd
[    2.414828] usb usb2: SerialNumber: 0000:00:14.0
[    2.415049] hub 2-0:1.0: USB hub found
[    2.415072] hub 2-0:1.0: 6 ports detected
[    2.416589] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    2.418654] SSE version of gcm_enc/dec engaged.
[    2.727364] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.731514] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.740824] ata2.00: ATAPI: hp      DVDRW  DU8A6SH, DH61, max UDMA/133
[    2.746388] ata1.00: ATA-8: ST500LT012-1DG142, 1003YAM1, max UDMA/133
[    2.746403] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.748338] usb 1-5: new high-speed USB device number 2 using xhci_hcd
[    2.752664] ata2.00: configured for UDMA/133
[    2.785824] ata1.00: configured for UDMA/133
[    2.786606] scsi 0:0:0:0: Direct-Access     ATA      ST500LT012-1DG14 YAM1 PQ: 0 ANSI: 5
[    2.796582] scsi 1:0:0:0: CD-ROM            hp       DVDRW  DU8A6SH   DH61 PQ: 0 ANSI: 5
[    2.846130] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    2.846134] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.846160] sd 0:0:0:0: [sda] Write Protect is off
[    2.846163] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.846206] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.877661] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.877665] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.877960] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.897605] usb 1-5: New USB device found, idVendor=1a40, idProduct=0101
[    2.897611] usb 1-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.897614] usb 1-5: Product: USB 2.0 Hub
[    2.898527] hub 1-5:1.0: USB hub found
[    2.899478] hub 1-5:1.0: 4 ports detected
[    2.940933]  sda: sda1 sda2 < sda5 >
[    2.941850] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.143472] psmouse serio1: synaptics: queried max coordinates: x [..5652], y [..4846]
[    3.173676] psmouse serio1: synaptics: queried min coordinates: x [1330..], y [1094..]
[    3.173687] psmouse serio1: synaptics: The touchpad can support a better bus than the too old PS/2 protocol. Make sure MOUSE_PS2_SYNAPTICS_SMBUS and RMI4_SMB are enabled to get a better touchpad experience.
[    3.208069] usb 1-5.3: new full-speed USB device number 3 using xhci_hcd
[    3.234939] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xf00123/0x840300/0x2e800/0x0, board id: 3127, fw id: 8526786
[    3.276498] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
[    3.336594] usb 1-5.3: New USB device found, idVendor=0bda, idProduct=b006
[    3.336598] usb 1-5.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.336600] usb 1-5.3: Product: Bluetooth Radio 
[    3.336602] usb 1-5.3: Manufacturer: Realtek 
[    3.336604] usb 1-5.3: SerialNumber: 00e04c000001
[    3.397810] PM: Starting manual resume from disk
[    3.398113] PM: Image not found (code -22)
[    3.746558] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    5.424780] random: crng init done
[    5.879028] ip_tables: (C) 2000-2006 Netfilter Core Team
[    6.037420] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    6.056912] systemd[1]: Detected architecture x86-64.
[    6.080591] systemd[1]: Set hostname to <debian>.
[    8.325913] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    8.326127] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    8.326234] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    8.326276] systemd[1]: Reached target Local Encrypted Volumes.
[    8.326304] systemd[1]: Reached target User and Group Name Lookups.
[    8.326746] systemd[1]: Created slice User and Session Slice.
[    8.327092] systemd[1]: Created slice System Slice.
[    9.134872] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    9.244190] lp: driver loaded but no devices found
[    9.441892] RPC: Registered named UNIX socket transport module.
[    9.441895] RPC: Registered udp transport module.
[    9.441896] RPC: Registered tcp transport module.
[    9.441897] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    9.654917] ppdev: user-space parallel port driver
[    9.688980] systemd-journald[256]: Received request to flush runtime journal from PID 1
[    9.895130] loop: module loaded
[   12.856709] audit: type=1400 audit(1519660223.244:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=337 comm="apparmor_parser"
[   12.856719] audit: type=1400 audit(1519660223.244:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=337 comm="apparmor_parser"
[   12.856725] audit: type=1400 audit(1519660223.244:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=337 comm="apparmor_parser"
[   13.066471] audit: type=1400 audit(1519660223.452:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=338 comm="apparmor_parser"
[   13.097284] audit: type=1400 audit(1519660223.484:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=336 comm="apparmor_parser"
[   13.097291] audit: type=1400 audit(1519660223.484:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=336 comm="apparmor_parser"
[   13.097295] audit: type=1400 audit(1519660223.484:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=336 comm="apparmor_parser"
[   13.097300] audit: type=1400 audit(1519660223.484:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer//sanitized_helper" pid=336 comm="apparmor_parser"
[   13.097303] audit: type=1400 audit(1519660223.484:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=336 comm="apparmor_parser"
[   13.097306] audit: type=1400 audit(1519660223.484:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-thumbnailer//sanitized_helper" pid=336 comm="apparmor_parser"
[   13.878558] input: HP Wireless hotkeys as /devices/virtual/input/input3
[   13.905143] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[   13.905228] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[   13.932881] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0D:00/input/input4
[   13.932900] ACPI: Lid Switch [LID0]
[   13.933034] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[   13.933064] ACPI: Power Button [PWRF]
[   14.015059] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   14.239793] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   14.239875] sr 1:0:0:0: Attached scsi generic sg1 type 5
[   14.297402] ACPI: AC Adapter [ACAD] (off-line)
[   14.319187] wmi_bus wmi_bus-PNP0C14:00: WQBJ data block query control method not found
[   14.616221] ACPI: Battery Slot [BAT1] (battery present)
[   14.742577] input: PC Speaker as /devices/platform/pcspkr/input/input6
[   15.499320] iTCO_vendor_support: vendor-support=0
[   15.500333] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   15.500440] iTCO_wdt: Found a Braswell SoC TCO device (Version=3, TCOBASE=0x0460)
[   15.500601] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   16.094326] [drm] Memory usable by graphics device = 2048M
[   16.094332] [drm] Replacing VGA console driver
[   16.098378] Console: switching to colour dummy device 80x25
[   16.099029] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   16.099031] [drm] Driver supports precise vblank timestamp query.
[   16.103766] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   16.104650] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   16.123221] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   16.136501] Bluetooth: Core ver 2.22
[   16.136534] NET: Registered protocol family 31
[   16.136536] Bluetooth: HCI device and connection manager initialized
[   16.136710] Bluetooth: HCI socket layer initialized
[   16.136715] Bluetooth: L2CAP socket layer initialized
[   16.136725] Bluetooth: SCO socket layer initialized
[   16.148161] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
[   16.149956] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   16.151657] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[   16.342490] platform regulatory.0: firmware: failed to load regulatory.db (-2)
[   16.342504] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[   16.342509] cfg80211: failed to load regulatory.db
[   16.356132] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   16.433620] usbcore: registered new interface driver btusb
[   16.449443] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
[   16.449448] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_config.bin
[   16.454420] kvm: disabled by bios
[   16.456556] hp_wmi: query 0xd returned error 0x5
[   16.456675] input: HP WMI hotkeys as /devices/virtual/input/input7
[   16.504549] bluetooth hci0: firmware: failed to load rtl_bt/rtl8723b_config.bin (-2)
[   16.504569] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2
[   16.504574] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_fw.bin
[   16.563119] fbcon: inteldrmfb (fb0) is primary device
[   16.595876] intel_rapl: Found RAPL domain package
[   16.595877] intel_rapl: Found RAPL domain core
[   16.664101] bluetooth hci0: firmware: direct-loading firmware rtl_bt/rtl8723b_fw.bin
[   16.665525] Bluetooth: hci0: rom_version status=0 version=1
[   16.665542] Bluetooth: hci0: cfg_sz 0, total size 22496
[   16.835156] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3227: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   16.835159] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   16.835161] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   16.835163] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   16.835164] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   16.835167] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x19
[   16.835169] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[   17.181190] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   17.184354] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   17.184463] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   17.184562] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   17.678408] rtl8723be: Using firmware rtlwifi/rtl8723befw_36.bin
[   17.728311] rtl8723be 0000:02:00.0: firmware: direct-loading firmware rtlwifi/rtl8723befw_36.bin
[   17.744739] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[   17.745174] rtlwifi: rtlwifi: wireless switch is on
[   17.765122] Adding 8075260k swap on /dev/sda5.  Priority:-2 extents:1 across:8075260k FS
[   17.854268] Console: switching to colour frame buffer device 170x48
[   17.879677] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   19.950829] rtl8723be 0000:02:00.0 wlp2s0: renamed from wlan0
[   23.145666] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   23.145670] Bluetooth: BNEP filters: protocol multicast
[   23.145677] Bluetooth: BNEP socket layer initialized
[   27.367302] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   27.395311] r8169 0000:03:00.0: firmware: direct-loading firmware rtl_nic/rtl8106e-1.fw
[   27.569476] r8169 0000:03:00.0 eth0: link down
[   27.569646] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   27.583590] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   28.196758] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   28.715838] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   28.901212] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   46.595971] Bluetooth: RFCOMM TTY layer initialized
[   46.595992] Bluetooth: RFCOMM socket layer initialized
[   46.596082] Bluetooth: RFCOMM ver 1.11
[   72.365762] fuse init (API version 7.26)
[   79.104427] rfkill: input handler disabled
[  276.643821] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[  276.706287] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[  283.948463] [drm:i915_gem_idle_work_handler [i915]] *ERROR* Timeout waiting for engines to idle
[  284.619430] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[  286.242513] wlp2s0: authenticate with 0c:d2:b5:91:a8:0b
[  286.254409] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 1/3)
[  286.356333] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 2/3)
[  286.460521] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 3/3)
[  286.564335] wlp2s0: authentication with 0c:d2:b5:91:a8:0b timed out
[  287.645745] wlp2s0: authenticate with 0c:d2:b5:91:a8:0b
[  287.665356] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 1/3)
[  287.768651] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 2/3)
[  287.872543] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 3/3)
[  287.976340] wlp2s0: authentication with 0c:d2:b5:91:a8:0b timed out
[  289.470527] wlp2s0: authenticate with 0c:d2:b5:91:a8:0b
[  289.481755] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 1/3)
[  289.584528] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 2/3)
[  289.688350] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 3/3)
[  289.792343] wlp2s0: authentication with 0c:d2:b5:91:a8:0b timed out
[  291.777187] wlp2s0: authenticate with 0c:d2:b5:91:a8:0b
[  291.793046] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 1/3)
[  291.896394] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 2/3)
[  292.000344] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 3/3)
[  292.104565] wlp2s0: authentication with 0c:d2:b5:91:a8:0b timed out
[  302.084390] wlp2s0: authenticate with 0c:d2:b5:91:a8:0b
[  302.097075] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 1/3)
[  302.200356] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 2/3)
[  302.304535] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 3/3)
[  302.408340] wlp2s0: authentication with 0c:d2:b5:91:a8:0b timed out
[  310.014938] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[  310.536818] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[  474.590908] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[  476.186434] wlp2s0: authenticate with 0c:d2:b5:91:a8:0b
[  476.208431] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 1/3)
[  476.312255] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 2/3)
[  476.416113] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 3/3)
[  476.520078] wlp2s0: authentication with 0c:d2:b5:91:a8:0b timed out
[  487.530440] wlp2s0: authenticate with 0c:d2:b5:91:a8:0b
[  487.552591] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 1/3)
[  487.656476] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 2/3)
[  487.760086] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 3/3)
[  487.864125] wlp2s0: authentication with 0c:d2:b5:91:a8:0b timed out
[  500.018472] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[  500.056159] ------------[ cut here ]------------
[  500.056162] rtl8723be: error H2C cmd because of Fw download fail!!!
[  500.056198] WARNING: CPU: 0 PID: 22 at /build/linux-PFKtCE/linux-4.15.4/drivers/net/wireless/realtek/rtlwifi/rtl8723be/fw.c:227 rtl8723be_fill_h2c_cmd+0x103/0x440 [rtl8723be]
[  500.056200] Modules linked in: fuse rfcomm cmac bnep arc4 rtl8723be btcoexist snd_hda_codec_hdmi rtl8723_common rtl_pci rtlwifi snd_hda_codec_realtek snd_hda_codec_generic intel_rapl intel_powerclamp coretemp mac80211 btusb btrtl btbcm btintel bluetooth cfg80211 i915 kvm drbg ansi_cprng ecdh_generic irqbypass hp_wmi wmi_bmof sparse_keymap crct10dif_pclmul crc32_pclmul iTCO_wdt iTCO_vendor_support ghash_clmulni_intel intel_cstate joydev evdev rfkill drm_kms_helper serio_raw snd_hda_intel snd_hda_codec drm pcspkr battery i2c_algo_bit snd_hda_core snd_hwdep snd_pcm snd_timer wmi int3403_thermal ac sg video int3400_thermal acpi_thermal_rel snd shpchp tpm_crb button processor_thermal_device int340x_thermal_zone intel_soc_dts_iosf hp_wireless lpc_ich mfd_core soundcore loop parport_pc ppdev sunrpc lp parport
[  500.056274]  ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 crc32c_generic fscrypto ecb sd_mod sr_mod cdrom crc32c_intel aesni_intel aes_x86_64 crypto_simd cryptd glue_helper psmouse i2c_i801 xhci_pci r8169 mii xhci_hcd ahci libahci libata usbcore usb_common scsi_mod thermal fan
[  500.056309] CPU: 0 PID: 22 Comm: kworker/0:1 Not tainted 4.15.0-1-amd64 #1 Debian 4.15.4-1
[  500.056310] Hardware name: HP HP Notebook/80C5, BIOS F.1E 12/25/2015
[  500.056320] Workqueue: rtl8723be_pci rtl_c2hcmd_wq_callback [rtlwifi]
[  500.056326] RIP: 0010:rtl8723be_fill_h2c_cmd+0x103/0x440 [rtl8723be]
[  500.056327] RSP: 0018:ffff9603c072fd88 EFLAGS: 00010286
[  500.056330] RAX: 0000000000000000 RBX: ffff8831fa291500 RCX: 0000000000000006
[  500.056332] RDX: 0000000000000007 RSI: 0000000000000096 RDI: ffff8831ffc166b0
[  500.056333] RBP: 0000000000000030 R08: 00000000000002d0 R09: 0000000000000004
[  500.056334] R10: 0000000000000000 R11: 0000000000000001 R12: ffff8831fa291500
[  500.056336] R13: 0000000000000000 R14: dead000000000100 R15: 0000000000000001
[  500.056338] FS:  0000000000000000(0000) GS:ffff8831ffc00000(0000) knlGS:0000000000000000
[  500.056340] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  500.056341] CR2: 00007f79275c7000 CR3: 000000014ff4a000 CR4: 00000000001006f0
[  500.056343] Call Trace:
[  500.056357]  halbtc_set_bt_reg+0xb4/0xd0 [btcoexist]
[  500.056363]  ex_btc8723b1ant_bt_info_notify+0x307/0x6d0 [btcoexist]
[  500.056370]  rtl_c2hcmd_launcher+0xbb/0x120 [rtlwifi]
[  500.056378]  process_one_work+0x18d/0x390
[  500.056381]  worker_thread+0x2e/0x390
[  500.056384]  ? process_one_work+0x390/0x390
[  500.056386]  kthread+0x113/0x130
[  500.056389]  ? kthread_create_worker_on_cpu+0x70/0x70
[  500.056394]  ret_from_fork+0x35/0x40
[  500.056397] Code: 41 80 bc 24 6c 08 00 00 00 75 c9 48 89 c6 48 89 ef e8 12 bf 3e cf eb a9 48 c7 c7 88 97 ac c0 c6 05 72 42 01 00 01 e8 6d ef db ce <0f> ff e9 3a ff ff ff 48 89 c6 41 c6 84 24 6c 08 00 00 01 48 89 
[  500.056444] ---[ end trace d3e37e79b47ff5a6 ]---
[  500.543869] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[  518.145143] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[  518.218258] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[  568.655201] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[  570.305713] wlp2s0: authenticate with 0c:d2:b5:91:a8:0b
[  570.323238] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 1/3)
[  570.424565] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 2/3)
[  570.528087] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 3/3)
[  570.632329] wlp2s0: authentication with 0c:d2:b5:91:a8:0b timed out
[  571.714908] wlp2s0: authenticate with 0c:d2:b5:91:a8:0b
[  571.737377] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 1/3)
[  571.840159] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 2/3)
[  571.944687] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 3/3)
[  572.052422] wlp2s0: authentication with 0c:d2:b5:91:a8:0b timed out
[  573.548727] wlp2s0: authenticate with 0c:d2:b5:91:a8:0b
[  573.563345] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 1/3)
[  573.672439] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 2/3)
[  573.776552] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 3/3)
[  573.880382] wlp2s0: authentication with 0c:d2:b5:91:a8:0b timed out
[  575.911119] wlp2s0: authenticate with 0c:d2:b5:91:a8:0b
[  575.925628] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 1/3)
[  576.028362] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 2/3)
[  576.132237] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 3/3)
[  576.236116] wlp2s0: authentication with 0c:d2:b5:91:a8:0b timed out
[  586.250847] wlp2s0: authenticate with 0c:d2:b5:91:a8:0b
[  586.263220] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 1/3)
[  586.368404] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 2/3)
[  586.477452] wlp2s0: send auth to 0c:d2:b5:91:a8:0b (try 3/3)
[  586.580426] wlp2s0: authentication with 0c:d2:b5:91:a8:0b timed out
[  594.013362] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[  594.538868] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready

--- End Message ---
--- Begin Message ---
Hi

This bug was filed for a very old kernel or the bug is old itself
without resolution.

If you can reproduce it with

- the current version in unstable/testing
- the latest kernel from backports

please reopen the bug, see https://www.debian.org/Bugs/server-control
for details.

Regards,
Salvatore

--- End Message ---

Reply to: