[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#883773: marked as done (linux-image-3.16.0-4-686-pae: Fintek F81866)

Your message dated Sat, 15 May 2021 12:24:29 -0700 (PDT)
with message-id <60a01fed.1c69fb81.8036f.9045@mx.google.com>
and subject line Closing this bug (BTS maintenance for src:linux bugs)
has caused the Debian Bug report #883773,
regarding linux-image-3.16.0-4-686-pae: Fintek F81866
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
883773: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=883773
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---

Package: src:linux
Version: 3.16.43-2+deb8u5
Severity: important(fixed-upstream)


Dear Maintainer,

I'm using Debian 8 and 9 stable releases with kernel-image-686-pae.
I have a board with the Fintek F81866 SuperIO chipset; serial ports /dev/ttyS0 and /dev/ttyS1 work properly, but /dev/ttyS2 and /dev/ttyS3 don't.
Looking at the source code I found that probably the current kernel(on Debian 9 and 8) lacks of specific support for Fintek F81866 (file: 8250_fintek.c).
I tried with Debian testing and serial ports all work properly.
On current mainline kernel source(file: 8250_fintek.c) I can see that there is a specific support for F81866.

Is it possible to support it on next stable kernel patch ?


Thanks in advance.
Best regards


-- Package-specific info:
** Version:
Linux version 3.16.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.43-2+deb8u5 (2017-09-19)

** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-686-pae root=UUID=b757d483-0e39-49af-ad10-aad5401fbec3 ro initrd=/install/initrd.gz quiet splash vt.global_cursor_default=0

** Tainted: C (1024)
 * Module from drivers/staging has been loaded.

** Kernel log:
[    9.639992] systemd[1]: Listening on Delayed Shutdown Socket.
[    9.640028] systemd[1]: Starting Journal Socket (/dev/log).
[    9.640278] systemd[1]: Listening on Journal Socket (/dev/log).
[    9.640332] systemd[1]: Starting udev Control Socket.
[    9.640503] systemd[1]: Listening on udev Control Socket.
[    9.640553] systemd[1]: Starting udev Kernel Socket.
[    9.640708] systemd[1]: Listening on udev Kernel Socket.
[    9.640752] systemd[1]: Starting Journal Socket.
[    9.640962] systemd[1]: Listening on Journal Socket.
[    9.641021] systemd[1]: Starting System Slice.
[    9.641228] systemd[1]: Created slice System Slice.
[    9.641269] systemd[1]: Starting system-systemd\x2dfsck.slice.
[    9.641515] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    9.641565] systemd[1]: Started File System Check on Root Device.
[    9.641597] systemd[1]: Starting system-getty.slice.
[    9.641823] systemd[1]: Created slice system-getty.slice.
[    9.641894] systemd[1]: Starting Increase datagram queue length...
[    9.643094] systemd[1]: Mounting Debug File System...
[    9.644167] systemd[1]: Starting udev Coldplug all Devices...
[    9.654304] systemd[1]: Starting Load Kernel Modules...
[    9.657715] systemd[1]: Started Set Up Additional Binary Formats.
[    9.657766] systemd[1]: Mounting POSIX Message Queue File System...
[    9.658534] systemd[1]: Mounting Huge Pages File System...
[    9.659468] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    9.660331] systemd[1]: Starting Slices.
[    9.660431] systemd[1]: Reached target Slices.
[    9.672512] fuse init (API version 7.23)
[    9.673081] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    9.673576] systemd[1]: Starting Create Static Device Nodes in /dev...
[    9.675213] systemd[1]: Started Load Kernel Modules.
[    9.675507] systemd[1]: Starting Apply Kernel Variables...
[    9.676427] systemd[1]: Mounted Configuration File System.
[    9.676479] systemd[1]: Mounting FUSE Control File System...
[    9.693168] systemd[1]: Mounted FUSE Control File System.
[    9.693410] systemd[1]: Mounted Huge Pages File System.
[    9.693584] systemd[1]: Mounted POSIX Message Queue File System.
[    9.693752] systemd[1]: Mounted Debug File System.
[    9.694286] systemd[1]: Started Increase datagram queue length.
[    9.695455] systemd[1]: Started udev Coldplug all Devices.
[    9.699835] systemd[1]: Started Apply Kernel Variables.
[    9.706503] systemd[1]: Started Create Static Device Nodes in /dev.
[    9.731407] systemd[1]: Starting udev Kernel Device Manager...
[    9.732449] systemd[1]: Starting Syslog Socket.
[    9.732621] systemd[1]: Listening on Syslog Socket.
[    9.732670] systemd[1]: Starting Journal Service...
[    9.733739] systemd[1]: Started Journal Service.
[    9.738314] systemd-udevd[211]: starting version 215
[    9.862882] parport_pc 00:03: reported by Plug and Play ACPI
[    9.862945] parport0: PC-style at 0x378, irq 7 [PCSPP]
[    9.886461] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    9.906640] input: PC Speaker as /devices/platform/pcspkr/input/input7
[    9.913152] alg: No test for crc32 (crc32-pclmul)
[    9.932778] snd_hda_intel 0000:00:1b.0: irq 113 for MSI/MSI-X
[    9.942600] input: eGalax Inc. eGalaxTouch EXC3000-0739-49.00.00 as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:0EEF:C000.0001/input/input8
[    9.945225] hid-multitouch 0003:0EEF:C000.0001: input,hiddev0,hidraw0: USB HID v2.10 Pointer [eGalax Inc. eGalaxTouch EXC3000-0739-49.00.00] on usb-0000:00:14.0-1.3/input0
[    9.945671] intel_rapl: Found RAPL domain package
[    9.945684] intel_rapl: Found RAPL domain core
[    9.964135] ppdev: user-space parallel port driver
[    9.966927] iTCO_vendor_support: vendor-support=0
[    9.971817] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    9.971889] iTCO_wdt: Found a Bay Trail SoC TCO device (Version=3, TCOBASE=0x0460)
[    9.972125] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    9.989404] Adding 686076k swap on /dev/sda5.  Priority:-1 extents:1 across:686076k SSFS
[    9.995364] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    9.995371] sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    9.995375] sound hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    9.995377] sound hdaudioC0D0:    mono: mono_out=0x0
[    9.995380] sound hdaudioC0D0:    inputs:
[    9.995384] sound hdaudioC0D0:      Mic=0x19
[   10.033806] aufs au_opts_parse:1217:mount[306]: unknown option errors=remount-ro
[   10.037844] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input10
[   10.041437] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   10.041567] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   10.041684] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   10.041821] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   10.042568] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[   10.042694] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[   10.097115] systemd-journald[212]: Received request to flush runtime journal from PID 1
[   10.151162] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: errors=continue
[   11.060832] random: nonblocking pool is initialized
[   11.221917] r8169 0000:03:00.0: firmware: direct-loading firmware rtl_nic/rtl8168g-2.fw
[   11.261829] r8169 0000:03:00.0 eth0: link down
[   11.261853] r8169 0000:03:00.0 eth0: link down
[   11.261900] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   11.305758] r8169 0000:07:00.0 eth1: link down
[   11.305814] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   11.541077] RPC: Registered named UNIX socket transport module.
[   11.541084] RPC: Registered udp transport module.
[   11.541088] RPC: Registered tcp transport module.
[   11.541091] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   11.547479] FS-Cache: Loaded
[   11.560624] FS-Cache: Netfs 'nfs' registered for caching
[   11.574643] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   13.819858] r8169 0000:03:00.0 eth0: link up
[   13.819873] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   19.305137] r8169 0000:03:00.0 eth0: link down
[   19.305147] r8169 0000:03:00.0 eth0: link down
[   19.305195] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   21.863082] r8169 0000:03:00.0 eth0: link up
[   21.863100] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

** Model information
not available

** Loaded modules:
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
fscache
sunrpc
snd_hda_codec_hdmi
snd_hda_codec_realtek
snd_hda_codec_generic
joydev
iTCO_wdt
iTCO_vendor_support
ppdev
intel_powerclamp
intel_rapl
coretemp
hid_multitouch
kvm_intel
snd_hda_intel
snd_hda_controller
kvm
snd_hda_codec
crc32_pclmul
snd_hwdep
serio_raw
lpc_ich
pcspkr
mfd_core
snd_pcm
snd_timer
snd
soundcore
shpchp
iosf_mbi
snd_soc_sst_acpi
parport_pc
parport
evdev
processor
battery
fuse
autofs4
aufs(C)
ext4
crc16
mbcache
jbd2
usbhid
hid
sg
sd_mod
crc_t10dif
crct10dif_generic
crct10dif_common
crc32c_intel
psmouse
i2c_i801
xhci_hcd
r8169
mii
ahci
i915
usbcore
libahci
usb_common
i2c_algo_bit
drm_kms_helper
libata
drm
scsi_mod
i2c_core
fan
thermal
video
thermal_sys
button

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series SoC Transaction Register [8086:0f00] (rev 0e)
    Subsystem: Intel Corporation Device [8086:0f31]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Kernel driver in use: iosf_mbi_pci

00:02.0 VGA compatible controller [0300]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Graphics & Display [8086:0f31] (rev 0e) (prog-if 00 [VGA controller])
    Subsystem: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Graphics & Display [8086:0f31]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 111
    Region 0: Memory at 90000000 (32-bit, non-prefetchable) [size=4M]
    Region 2: Memory at 80000000 (32-bit, prefetchable) [size=256M]
    Region 4: I/O ports at e080 [size=8]
    Expansion ROM at <unassigned> [disabled]
    Capabilities: <access denied>
    Kernel driver in use: i915

00:13.0 SATA controller [0106]: Intel Corporation Device [8086:0f23] (rev 0e) (prog-if 01 [AHCI 1.0])
    Subsystem: Intel Corporation Device [8086:0f23]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 107
    Region 0: I/O ports at e070 [size=8]
    Region 1: I/O ports at e060 [size=4]
    Region 2: I/O ports at e050 [size=8]
    Region 3: I/O ports at e040 [size=4]
    Region 4: I/O ports at e020 [size=32]
    Region 5: Memory at 90816000 (32-bit, non-prefetchable) [size=2K]
    Capabilities: <access denied>
    Kernel driver in use: ahci

00:14.0 USB controller [0c03]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series USB xHCI [8086:0f35] (rev 0e) (prog-if 30 [XHCI])
    Subsystem: Intel Corporation Atom Processor Z36xxx/Z37xxx Series USB xHCI [8086:0f35]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 112
    Region 0: Memory at 90800000 (64-bit, non-prefetchable) [size=64K]
    Capabilities: <access denied>
    Kernel driver in use: xhci_hcd

00:1b.0 Audio device [0403]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series High Definition Audio Controller [8086:0f04] (rev 0e)
    Subsystem: Intel Corporation Device [8086:7270]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 113
    Region 0: Memory at 90810000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: <access denied>
    Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge [0604]: Intel Corporation Device [8086:0f48] (rev 0e) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
    I/O behind bridge: 00001000-00001fff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
        PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: <access denied>
    Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation Device [8086:0f4a] (rev 0e) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
    I/O behind bridge: 0000d000-0000dfff
    Memory behind bridge: 90700000-907fffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
        PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: <access denied>
    Kernel driver in use: pcieport

00:1c.2 PCI bridge [0604]: Intel Corporation Device [8086:0f4c] (rev 0e) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
    I/O behind bridge: 0000c000-0000cfff
    Memory behind bridge: 90600000-906fffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
        PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: <access denied>
    Kernel driver in use: pcieport

00:1c.3 PCI bridge [0604]: Intel Corporation Device [8086:0f4e] (rev 0e) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=00, secondary=04, subordinate=08, sec-latency=0
    I/O behind bridge: 0000b000-0000bfff
    Memory behind bridge: 90400000-905fffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
        PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: <access denied>
    Kernel driver in use: pcieport

00:1f.0 ISA bridge [0601]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Power Control Unit [8086:0f1c] (rev 0e)
    Subsystem: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Power Control Unit [8086:0f1c]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Capabilities: <access denied>
    Kernel driver in use: lpc_ich

00:1f.3 SMBus [0c05]: Intel Corporation Device [8086:0f12] (rev 0e)
    Subsystem: Intel Corporation Device [8086:0f12]
    Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Interrupt: pin B routed to IRQ 18
    Region 0: Memory at 90814000 (32-bit, non-prefetchable) [size=32]
    Region 4: I/O ports at e000 [size=32]
    Capabilities: <access denied>

02:00.0 SATA controller [0106]: ASMedia Technology Inc. ASM1062 Serial ATA Controller [1b21:0612] (rev 02) (prog-if 01 [AHCI 1.0])
    Subsystem: ASMedia Technology Inc. Device [1b21:1060]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 110
    Region 0: I/O ports at d050 [size=8]
    Region 1: I/O ports at d040 [size=4]
    Region 2: I/O ports at d030 [size=8]
    Region 3: I/O ports at d020 [size=4]
    Region 4: I/O ports at d000 [size=32]
    Region 5: Memory at 90700000 (32-bit, non-prefetchable) [size=512]
    Capabilities: <access denied>
    Kernel driver in use: ahci

03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 0c)
    Subsystem: Realtek Semiconductor Co., Ltd. Device [10ec:0123]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 108
    Region 0: I/O ports at c000 [size=256]
    Region 2: Memory at 90604000 (64-bit, non-prefetchable) [size=4K]
    Region 4: Memory at 90600000 (64-bit, prefetchable) [size=16K]
    Capabilities: <access denied>
    Kernel driver in use: r8169

04:00.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8605 PCI Express 4-port Gen2 Switch [10b5:8605] (rev ab) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Region 0: Memory at 90500000 (32-bit, non-prefetchable) [size=16K]
    Bus: primary=04, secondary=05, subordinate=08, sec-latency=0
    I/O behind bridge: 0000b000-0000bfff
    Memory behind bridge: 90400000-904fffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
        PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: <access denied>
    Kernel driver in use: pcieport

05:01.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8605 PCI Express 4-port Gen2 Switch [10b5:8605] (rev ab) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=05, secondary=06, subordinate=06, sec-latency=0
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
        PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: <access denied>
    Kernel driver in use: pcieport

05:02.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8605 PCI Express 4-port Gen2 Switch [10b5:8605] (rev ab) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=05, secondary=07, subordinate=07, sec-latency=0
    I/O behind bridge: 0000b000-0000bfff
    Memory behind bridge: 90400000-904fffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
        PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: <access denied>
    Kernel driver in use: pcieport

05:03.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8605 PCI Express 4-port Gen2 Switch [10b5:8605] (rev ab) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=05, secondary=08, subordinate=08, sec-latency=0
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
        PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: <access denied>
    Kernel driver in use: pcieport

07:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 0c)
    Subsystem: Realtek Semiconductor Co., Ltd. Device [10ec:0123]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 109
    Region 0: I/O ports at b000 [size=256]
    Region 2: Memory at 90404000 (64-bit, non-prefetchable) [size=4K]
    Region 4: Memory at 90400000 (64-bit, prefetchable) [size=16K]
    Capabilities: <access denied>
    Kernel driver in use: r8169


** USB devices:
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 006: ID 0424:2530 Standard Microsystems Corp.
Bus 001 Device 003: ID 0424:4504 Standard Microsystems Corp.
Bus 001 Device 005: ID 0424:2530 Standard Microsystems Corp.
Bus 001 Device 004: ID 0eef:c000 D-WAV Scientific Co., Ltd
Bus 001 Device 002: ID 0424:4504 Standard Microsystems Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: 8.9
Architecture: i386 (i686)

Kernel: Linux 3.16.0-4-686-pae (SMP w/4 CPU cores)
Locale: LANG=C.UTF-8, LC_CTYPE=C.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages linux-image-3.16.0-4-686-pae depends on:
ii  debconf [debconf-2.0]                   1.5.56+deb8u1
ii  initramfs-tools [linux-initramfs-tool]  0.120+deb8u3
ii  kmod                                    18-3
ii  linux-base                              3.5

Versions of packages linux-image-3.16.0-4-686-pae recommends:
ii  firmware-linux-free  3.3
ii  irqbalance           1.0.6-3+deb8u1
ii  libc6-i686           2.19-18+deb8u10

Versions of packages linux-image-3.16.0-4-686-pae suggests:
pn  debian-kernel-handbook  <none>
ii  grub-pc                 2.02~beta2-22+deb8u1
pn  linux-doc-3.16          <none>

Versions of packages linux-image-3.16.0-4-686-pae is related to:
pn  firmware-atheros        <none>
pn  firmware-bnx2           <none>
pn  firmware-bnx2x          <none>
pn  firmware-brcm80211      <none>
pn  firmware-intelwimax     <none>
pn  firmware-ipw2x00        <none>
pn  firmware-ivtv           <none>
pn  firmware-iwlwifi        <none>
pn  firmware-libertas       <none>
pn  firmware-linux          <none>
pn  firmware-linux-nonfree  <none>
pn  firmware-myricom        <none>
pn  firmware-netxen         <none>
pn  firmware-qlogic         <none>
pn  firmware-ralink         <none>
pn  firmware-realtek        <none>
pn  xen-hypervisor          <none>

-- debconf information:
  linux-image-3.16.0-4-686-pae/prerm/removing-running-kernel-3.16.0-4-686-pae: true
  linux-image-3.16.0-4-686-pae/postinst/depmod-error-initrd-3.16.0-4-686-pae: false
  linux-image-3.16.0-4-686-pae/postinst/mips-initrd-3.16.0-4-686-pae:

--
Alessandro Carrara
STEP Automation
E-mail: alessandro.carrara@stepautomation.it

--- End Message ---
--- Begin Message --- 
Hi

This bug was filed for a very old kernel or the bug is old itself
without resolution.

If you can reproduce it with

- the current version in unstable/testing
- the latest kernel from backports

please reopen the bug, see https://www.debian.org/Bugs/server-control
for details.

Regards,
Salvatore

--- End Message ---
Reply to: