[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#881425: marked as done (linux-image-4.13.0-1-amd64: "rm -rf <directory>" fails with ENOTEMPTY (Directory not empty))



Your message dated Sat, 15 May 2021 12:17:48 -0700 (PDT)
with message-id <60a01e5c.1c69fb81.8d7a1.93fc@mx.google.com>
and subject line Closing this bug (BTS maintenance for src:linux bugs)
has caused the Debian Bug report #881425,
regarding linux-image-4.13.0-1-amd64: "rm -rf <directory>" fails with ENOTEMPTY (Directory not empty)
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
881425: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=881425
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: src:linux
Version: 4.13.4-2
Severity: normal

My root FS is an

    /dev/mapper/n555--vg-root / ext4 rw,relatime,errors=remount-ro,data=ordered 0 0

Due to a programming error I filled one directory with many files; the
"rm <directory>/*" I did previously couldn't copy anymore, so I ran "rm
-rf <directory>", but that failed with "directory not empty".


I did an strace; this showed

	ioctl(0, TCGETS, {B38400 opost isig icanon echo ...}) = 0
	lstat("/", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
	newfstatat(AT_FDCWD, "../<the specific directory>/", {st_mode=S_IFDIR|0755, st_size=13131776, ...}, AT_SYMLINK_NOFOLLOW) = 0
	openat(AT_FDCWD, "../<the specific directory>/", O_RDONLY|O_NOCTTY|O_NONBLOCK|O_DIRECTORY|O_NOFOLLOW) = 3
	fstat(3, {st_mode=S_IFDIR|0755, st_size=13131776, ...}) = 0
	fcntl(3, F_GETFL) = 0x38800 (flags O_RDONLY|O_NONBLOCK|O_LARGEFILE|O_DIRECTORY|O_NOFOLLOW)
	fcntl(3, F_SETFD, FD_CLOEXEC) = 0
	getdents(3, /* 513 entries */, 32768) = 32752
	close(3)          = 0
	openat(AT_FDCWD, "../<the specific directory>/", O_RDONLY|O_NOCTTY|O_NONBLOCK|O_DIRECTORY|O_NOFOLLOW|O_CLOEXEC) = 3
	fstat(3, {st_mode=S_IFDIR|0755, st_size=13131776, ...}) = 0
	fcntl(3, F_GETFL) = 0x38800 (flags O_RDONLY|O_NONBLOCK|O_LARGEFILE|O_DIRECTORY|O_NOFOLLOW)
	fcntl(3, F_SETFD, FD_CLOEXEC) = 0
	fstatfs(-100, 0x7ffd05b2b490) = -1 EBADF (Bad file descriptor)
	fcntl(3, F_DUPFD_CLOEXEC, 3) = 4
	getdents(3, /* 513 entries */, 32768) = 32752
	brk(0x55f85aa65000) = 0x55f85aa65000
	getdents(3, /* 512 entries */, 32768) = 32768
	brk(0x55f85aa86000) = 0x55f85aa86000
	getdents(3, /* 512 entries */, 32768) = 32768
	brk(0x55f85aaa7000) = 0x55f85aaa7000
	getdents(3, /* 512 entries */, 32768) = 32768
	brk(0x55f85aac8000) = 0x55f85aac8000
	brk(0x55f85aae9000) = 0x55f85aae9000
	getdents(3, /* 512 entries */, 32768) = 32768
	brk(0x55f85ab0a000) = 0x55f85ab0a000
	getdents(3, /* 512 entries */, 32768) = 32768
	brk(0x55f85ab2b000) = 0x55f85ab2b000
	getdents(3, /* 512 entries */, 32768) = 32768
	brk(0x55f85ab4c000) = 0x55f85ab4c000
	getdents(3, /* 512 entries */, 32768) = 32768
	brk(0x55f85ab6d000) = 0x55f85ab6d000
	brk(0x55f85ab8e000) = 0x55f85ab8e000
	getdents(3, /* 512 entries */, 32768) = 32768
	brk(0x55f85abaf000) = 0x55f85abaf000
	getdents(3, /* 19 entries */, 32768) = 1216
	getdents(3, /* 0 entries */, 32768) = 0
	close(3)          = 0

followed by 4627 calls of

	unlinkat(4, "filename...", 0) = 0
	unlinkat(4, "filename...", 0) = 0
	unlinkat(4, "filename...", 0) = 0
	...
	unlinkat(4, "filename...", 0) = 0

(Each of these filenames is 42 bytes long, BTW) and then

	brk(0x55f85aa4e000) = 0x55f85aa4e000
	close(4)          = 0
	unlinkat(AT_FDCWD, "../redrum-replacements/", AT_REMOVEDIR) = -1 ENOTEMPTY (Directory not empty)

A few more invocations of "rm -rf <directory>" didn't help.


Doing "ls" at that time gave me 17016 files left; I could clean up
manually via "rm *a" "rm *b" etc., and then a "rmdir <directory>"
worked normally.


So,
  * either the getdents() calls didn't return all the files,
  * "rm -rf" has a bug where not all files are deleted, or
  * the kernel didn't really delete the referenced files.

I know that there's a newer version of 4.13 available - just wanted to
report that in case it's not been seen yet.


-- Package-specific info:
** Version:
Linux version 4.13.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 6.4.0 20171010 (Debian 6.4.0-8)) #1 SMP Debian 4.13.4-2 (2017-10-15)

** Command line:
BOOT_IMAGE=/vmlinuz-4.13.0-1-amd64 root=/dev/mapper/n555--vg-root ro initrd=/install/initrd.gz quiet

** Tainted: WO (4608)
 * Taint on warning.
 * Out-of-tree module has been loaded.

** Kernel log:
[112079.787511] ACPI: Low-level resume complete
[112079.787553] ACPI: EC: EC started
[112079.787554] PM: Restoring platform NVS memory
[112079.787834] Suspended for 1295.691 seconds
[112079.789751] Enabling non-boot CPUs ...
[112079.789822] x86: Booting SMP configuration:
[112079.789823] smpboot: Booting Node 0 Processor 1 APIC 0x1
[112079.869862]  cache: parent cpu1 should not be sleeping
[112079.870059] CPU1 is up
[112079.870106] smpboot: Booting Node 0 Processor 2 APIC 0x2
[112079.953862]  cache: parent cpu2 should not be sleeping
[112079.954066] CPU2 is up
[112079.954114] smpboot: Booting Node 0 Processor 3 APIC 0x3
[112080.057861]  cache: parent cpu3 should not be sleeping
[112080.058072] CPU3 is up
[112080.058117] smpboot: Booting Node 0 Processor 4 APIC 0x4
[112080.153864]  cache: parent cpu4 should not be sleeping
[112080.154095] CPU4 is up
[112080.154139] smpboot: Booting Node 0 Processor 5 APIC 0x5
[112080.249860]  cache: parent cpu5 should not be sleeping
[112080.250108] CPU5 is up
[112080.250153] smpboot: Booting Node 0 Processor 6 APIC 0x6
[112080.345861]  cache: parent cpu6 should not be sleeping
[112080.346133] CPU6 is up
[112080.346177] smpboot: Booting Node 0 Processor 7 APIC 0x7
[112080.441864]  cache: parent cpu7 should not be sleeping
[112080.442517] CPU7 is up
[112080.452695] ACPI: Waking up from system sleep state S3
[112081.178004] PM: noirq resume of devices complete after 48.102 msecs
[112081.178882] PM: early resume of devices complete after 0.844 msecs
[112081.179069] usb usb3: root hub lost power or was reset
[112081.179074] usb usb4: root hub lost power or was reset
[112081.179838] sd 0:0:0:0: [sda] Starting disk
[112081.180254] ACPI: EC: event unblocked
[112081.225866] tpm tpm0: A TPM error (6) occurred attempting to read a pcr value
[112081.225867] tpm tpm0: TPM is disabled/deactivated (0x6)
[112081.417859] usb 2-1: reset high-speed USB device number 2 using ehci-pci
[112081.417867] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[112081.504877] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[112081.505069] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[112081.509006] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[112081.509011] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[112081.509223] ata1.00: supports DRM functions and may not be fully accessible
[112081.509305] ata6.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[112081.509503] ata6.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[112081.509589] ata1.00: NCQ Send/Recv Log not supported
[112081.512765] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[112081.512769] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[112081.512941] ata1.00: supports DRM functions and may not be fully accessible
[112081.513308] ata1.00: NCQ Send/Recv Log not supported
[112081.514266] ata1.00: configured for UDMA/133
[112081.515281] ata6.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[112081.515478] ata6.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[112081.517449] ata6.00: configured for UDMA/133
[112081.525924] usb 3-5: reset full-speed USB device number 2 using xhci_hcd
[112081.785934] usb 3-11: reset full-speed USB device number 3 using xhci_hcd
[112081.928502] psmouse serio1: synaptics: queried max coordinates: x [..5674], y [..4684]
[112081.960341] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1170..]
[112082.079086] PM: resume of devices complete after 900.198 msecs
[112082.079142] usb 3-11:1.0: rebind failed: -517
[112082.079145] usb 3-11:1.1: rebind failed: -517
[112082.079374] acpi LNXPOWER:02: Turning OFF
[112082.079589] PM: Finishing wakeup.
[112082.079591] OOM killer enabled.
[112082.079592] Restarting tasks ... done.
[112082.931635] e1000e: eth0 NIC Link is Down
[112082.934933] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[112083.002979] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[112083.150082] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[112083.151069] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[112083.162931] iwlwifi 0000:04:00.0: Radio type=0x2-0x1-0x0
[112083.201266] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input27
[112083.466356] iwlwifi 0000:04:00.0: Radio type=0x2-0x1-0x0
[112083.546933] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[112083.964095] iwlwifi 0000:04:00.0: Radio type=0x2-0x1-0x0
[112084.261904] iwlwifi 0000:04:00.0: Radio type=0x2-0x1-0x0
[112084.345003] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[112084.379465] iwlwifi 0000:04:00.0: Radio type=0x2-0x1-0x0
[112084.678082] iwlwifi 0000:04:00.0: Radio type=0x2-0x1-0x0
[112084.759593] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[112085.087495] e1000e: eth0 NIC Link is Down
[112085.306076] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[112087.082105] iwlwifi 0000:04:00.0: Radio type=0x2-0x1-0x0
[112087.382408] iwlwifi 0000:04:00.0: Radio type=0x2-0x1-0x0
[112087.468311] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[112090.958297] iwlwifi 0000:04:00.0: Radio type=0x2-0x1-0x0
[112091.258533] iwlwifi 0000:04:00.0: Radio type=0x2-0x1-0x0
[112091.345245] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[112091.616099] e1000e: eth0 NIC Link is Down
[112091.834077] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[112091.968984] iwlwifi 0000:04:00.0: Radio type=0x2-0x1-0x0
[112092.269580] iwlwifi 0000:04:00.0: Radio type=0x2-0x1-0x0
[112092.351976] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[112094.464708] wlan0: authenticate with 54:e6:fc:ce:80:3a
[112094.466195] wlan0: send auth to 54:e6:fc:ce:80:3a (try 1/3)
[112094.468749] wlan0: authenticated
[112094.469887] wlan0: associate with 54:e6:fc:ce:80:3a (try 1/3)
[112094.473187] wlan0: RX AssocResp from 54:e6:fc:ce:80:3a (capab=0x431 status=0 aid=6)
[112094.476526] wlan0: associated
[112094.476593] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready

** Model information
sys_vendor: LENOVO
product_name: 20BFS56D00
product_version: ThinkPad T540p
chassis_vendor: LENOVO
chassis_version: Not Available
bios_vendor: LENOVO
bios_version: GMET74WW (2.22 )
board_vendor: LENOVO
board_name: 20BFS56D00
board_version: SDK0E50510 WIN

** Loaded modules:
iwldvm
iwlwifi
cpuid
dm_snapshot
dm_thin_pool
dm_persistent_data
dm_bio_prison
dm_bufio
hid_generic
usbhid
hid
nls_ascii
nls_cp437
vfat
fat
uas
usb_storage
ctr
ccm
xt_comment
xt_multiport
appletalk
ax25
ipx
p8023
p8022
psnap
pci_stub
vboxpci(O)
vboxnetadp(O)
vboxnetflt(O)
vboxdrv(O)
rfcomm
xt_CHECKSUM
iptable_mangle
ipt_MASQUERADE
nf_nat_masquerade_ipv4
iptable_nat
nf_nat_ipv4
nf_nat
nf_conntrack_ipv4
nf_defrag_ipv4
xt_conntrack
nf_conntrack
libcrc32c
ipt_REJECT
nf_reject_ipv4
xt_tcpudp
tun
bridge
stp
llc
ebtable_filter
ebtables
ip6table_filter
ip6_tables
iptable_filter
devlink
cmac
cpufreq_userspace
cpufreq_conservative
cpufreq_powersave
bnep
intel_rapl
btusb
x86_pkg_temp_thermal
btrtl
intel_powerclamp
btbcm
btintel
arc4
binfmt_misc
bluetooth
kvm_intel
kvm
irqbypass
intel_cstate
intel_uncore
iTCO_wdt
iTCO_vendor_support
drbg
ansi_cprng
snd_hda_codec_realtek
joydev
ecdh_generic
snd_hda_codec_hdmi
intel_rapl_perf
mac80211
snd_hda_codec_generic
serio_raw
wmi_bmof
pcspkr
snd_hda_intel
rtsx_pci_ms
snd_hda_codec
sg
memstick
cfg80211
snd_hda_core
snd_hwdep
snd_pcm
mei_me
snd_timer
ie31200_edac
lpc_ich
mei
shpchp
thinkpad_acpi
nvram
snd
soundcore
rfkill
battery
ac
evdev
fuse
coretemp
sunrpc
parport_pc
ppdev
lp
parport
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
fscrypto
ecb
btrfs
crc32c_generic
xor
raid6_pq
algif_skcipher
af_alg
dm_crypt
dm_mod
sr_mod
sd_mod
cdrom
rtsx_pci_sdmmc
mmc_core
crct10dif_pclmul
crc32_pclmul
crc32c_intel
ghash_clmulni_intel
pcbc
ahci
libahci
aesni_intel
aes_x86_64
crypto_simd
i915
glue_helper
cryptd
libata
i2c_algo_bit
xhci_pci
ehci_pci
scsi_mod
psmouse
drm_kms_helper
xhci_hcd
ehci_hcd
rtsx_pci
i2c_i801
mfd_core
e1000e
ptp
usbcore
pps_core
drm
usb_common
thermal
wmi
video
button

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller [8086:0c04] (rev 06)
	Subsystem: Lenovo Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller [17aa:2210]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel modules: ie31200_edac

00:02.0 VGA compatible controller [0300]: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller [8086:0416] (rev 06) (prog-if 00 [VGA controller])
	Subsystem: Lenovo 4th Gen Core Processor Integrated Graphics Controller [17aa:2210]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 30
	Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=4M]
	Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
	Region 4: I/O ports at 4000 [size=64]
	[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: i915
	Kernel modules: i915

00:03.0 Audio device [0403]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller [8086:0c0c] (rev 06)
	Subsystem: Lenovo Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller [17aa:2210]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 28
	Region 0: Memory at f1630000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel

00:14.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI [8086:8c31] (rev 04) (prog-if 30 [XHCI])
	Subsystem: Lenovo 8 Series/C220 Series Chipset Family USB xHCI [17aa:2210]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 27
	Region 0: Memory at f1620000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: xhci_hcd
	Kernel modules: xhci_pci

00:16.0 Communication controller [0780]: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 [8086:8c3a] (rev 04)
	Subsystem: Lenovo 8 Series/C220 Series Chipset Family MEI Controller [17aa:2210]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 31
	Region 0: Memory at f1639000 (64-bit, non-prefetchable) [size=16]
	Capabilities: <access denied>
	Kernel driver in use: mei_me
	Kernel modules: mei_me

00:16.3 Serial controller [0700]: Intel Corporation 8 Series/C220 Series Chipset Family KT Controller [8086:8c3d] (rev 04) (prog-if 02 [16550])
	Subsystem: Lenovo 8 Series/C220 Series Chipset Family KT Controller [17aa:2210]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin D routed to IRQ 17
	Region 0: I/O ports at 40b0 [size=8]
	Region 1: Memory at f1640000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: serial

00:19.0 Ethernet controller [0200]: Intel Corporation Ethernet Connection I217-LM [8086:153a] (rev 04)
	Subsystem: Lenovo Ethernet Connection I217-LM [17aa:2210]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 34
	Region 0: Memory at f1600000 (32-bit, non-prefetchable) [size=128K]
	Region 1: Memory at f163f000 (32-bit, non-prefetchable) [size=4K]
	Region 2: I/O ports at 4080 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: e1000e
	Kernel modules: e1000e

00:1a.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 [8086:8c2d] (rev 04) (prog-if 20 [EHCI])
	Subsystem: Lenovo 8 Series/C220 Series Chipset Family USB EHCI [17aa:2210]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at f163e000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci
	Kernel modules: ehci_pci

00:1b.0 Audio device [0403]: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller [8086:8c20] (rev 04)
	Subsystem: Lenovo 8 Series/C220 Series Chipset High Definition Audio Controller [17aa:2210]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 32
	Region 0: Memory at f1634000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel

00:1c.0 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 [8086:8c10] (rev d4) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 16
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	Memory behind bridge: f1500000-f15fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:1c.1 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #2 [8086:8c12] (rev d4) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 17
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
	Memory behind bridge: f1400000-f14fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:1c.2 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 [8086:8c14] (rev d4) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin C routed to IRQ 18
	Bus: primary=00, secondary=05, subordinate=0c, sec-latency=0
	I/O behind bridge: 00003000-00003fff
	Memory behind bridge: f0c00000-f13fffff
	Prefetchable memory behind bridge: 00000000f0400000-00000000f0bfffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:1d.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 [8086:8c26] (rev 04) (prog-if 20 [EHCI])
	Subsystem: Lenovo 8 Series/C220 Series Chipset Family USB EHCI [17aa:2210]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at f163d000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci
	Kernel modules: ehci_pci

00:1f.0 ISA bridge [0601]: Intel Corporation QM87 Express LPC Controller [8086:8c4f] (rev 04)
	Subsystem: Lenovo QM87 Express LPC Controller [17aa:2210]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel driver in use: lpc_ich
	Kernel modules: lpc_ich

00:1f.2 SATA controller [0106]: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] [8086:8c03] (rev 04) (prog-if 01 [AHCI 1.0])
	Subsystem: Lenovo 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] [17aa:2210]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 29
	Region 0: I/O ports at 40a8 [size=8]
	Region 1: I/O ports at 40bc [size=4]
	Region 2: I/O ports at 40a0 [size=8]
	Region 3: I/O ports at 40b8 [size=4]
	Region 4: I/O ports at 4060 [size=32]
	Region 5: Memory at f163c000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: <access denied>
	Kernel driver in use: ahci
	Kernel modules: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller [8086:8c22] (rev 04)
	Subsystem: Lenovo 8 Series/C220 Series Chipset Family SMBus Controller [17aa:2210]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin C routed to IRQ 18
	Region 0: Memory at f1638000 (64-bit, non-prefetchable) [size=256]
	Region 4: I/O ports at efa0 [size=32]
	Kernel driver in use: i801_smbus
	Kernel modules: i2c_i801

03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5227 PCI Express Card Reader [10ec:5227] (rev 01)
	Subsystem: Lenovo RTS5227 PCI Express Card Reader [17aa:2210]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 26
	Region 0: Memory at f1500000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: rtsx_pci
	Kernel modules: rtsx_pci

04:00.0 Network controller [0280]: Intel Corporation Centrino Advanced-N 6235 [8086:088f] (rev 24)
	Subsystem: Intel Corporation Centrino Advanced-N 6235 [8086:5260]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 33
	Region 0: Memory at f1400000 (64-bit, non-prefetchable) [size=8K]
	Capabilities: <access denied>
	Kernel driver in use: iwlwifi
	Kernel modules: iwlwifi


** USB devices:
Bus 002 Device 002: ID 8087:8000 Intel Corp. 
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8008 Intel Corp. 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 002: ID 058f:9540 Alcor Micro Corp. AU9540 Smartcard Reader
Bus 003 Device 003: ID 8087:07da Intel Corp. 
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: buster/sid
  APT prefers testing
  APT policy: (990, 'testing'), (500, 'testing-debug'), (500, 'unstable'), (500, 'stable'), (1, 'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 4.13.0-1-amd64 (SMP w/8 CPU cores)
Locale: LANG=de_AT.UTF-8, LC_CTYPE=de_AT.UTF-8 (charmap=UTF-8), LANGUAGE=de_AT:de (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages linux-image-4.13.0-1-amd64 depends on:
ii  initramfs-tools [linux-initramfs-tool]  0.130
ii  kmod                                    24-1
ii  linux-base                              4.5

Versions of packages linux-image-4.13.0-1-amd64 recommends:
ii  firmware-linux-free  3.4
ii  irqbalance           1.2.0-0.2

Versions of packages linux-image-4.13.0-1-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  grub-pc                 2.02-2
pn  linux-doc-4.13          <none>

Versions of packages linux-image-4.13.0-1-amd64 is related to:
ii  firmware-amd-graphics     20170823-1
ii  firmware-atheros          20170823-1
ii  firmware-bnx2             20170823-1
ii  firmware-bnx2x            20170823-1
ii  firmware-brcm80211        20170823-1
pn  firmware-cavium           <none>
pn  firmware-intel-sound      <none>
ii  firmware-intelwimax       20170823-1
ii  firmware-ipw2x00          20170823-1
ii  firmware-ivtv             20170823-1
ii  firmware-iwlwifi          20170823-1
ii  firmware-libertas         20170823-1
ii  firmware-linux-nonfree    20170823-1
ii  firmware-misc-nonfree     20170823-1
ii  firmware-myricom          20170823-1
ii  firmware-netxen           20170823-1
ii  firmware-qlogic           20170823-1
ii  firmware-realtek          20170823-1
ii  firmware-samsung          20170823-1
pn  firmware-siano            <none>
ii  firmware-ti-connectivity  20170823-1
pn  xen-hypervisor            <none>

-- no debconf information

-- 

--- End Message ---
--- Begin Message ---
Hi

This bug was filed for a very old kernel or the bug is old itself
without resolution.

If you can reproduce it with

- the current version in unstable/testing
- the latest kernel from backports

please reopen the bug, see https://www.debian.org/Bugs/server-control
for details.

Regards,
Salvatore

--- End Message ---

Reply to: