--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-4.8.0-1-amd64: Webcam Logitech C910 mix doesn't work properly
- From: "Mikhail V. Zhukov" <Mikhail.V.Zhukov@gmail.com>
- Date: Thu, 01 Dec 2016 09:20:54 +0300
- Message-id: <148057325464.13411.1507445214319694659.reportbug@go2mike.ru>
Package: src:linux
Version: 4.8.7-1
Severity: normal
Dear Maintainer,
I have problem with my Logitech C910 after update linux-image-4.8.0-1-amd64
package from 4.8.5 to 4.8.7-1. I can see such lines in dmesg :
[ 2714.851108] usb 3-9.1: 1:3: cannot set freq 32000 to ep 0x86
[ 2735.843040] usb 3-9.1: 1:3: cannot set freq 32000 to ep 0x86
[ 2752.995121] usb 3-9.1: 1:3: cannot set freq 32000 to ep 0x86
And sound input does not work. pulseaudio log have such lines:
D: [alsa-source-USB Audio] alsa-util.c: Got POLLERR from ALSA
D: [alsa-source-USB Audio] alsa-util.c: Got POLLIN from ALSA
D: [alsa-source-USB Audio] alsa-util.c: PCM state is SUSPENDED
I: [alsa-source-USB Audio] (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_RESUME failed
(-38)
I: [alsa-source-USB Audio] (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed
(-71)
I: [alsa-source-USB Audio] (alsa-lib)pcm.c: cannot recovery from suspend,
prepare failed: Ошибка протокола
W: [alsa-source-USB Audio] alsa-util.c: Could not recover from
POLLERR|POLLNVAL|POLLHUP and SUSPENDED: Ошибка протокола
It look like https://bugzilla.kernel.org/show_bug.cgi?id=44281 bug. But I
didn't see it before on my devices.
If I do such commands
rmmod snd-usb-audio
modprobe snd-usb-audio
all work fine
-- Package-specific info:
** Version:
Linux version 4.8.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 5.4.1 20161019 (Debian 5.4.1-3) ) #1 SMP Debian 4.8.7-1 (2016-11-13)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.8.0-1-amd64 root=UUID=f8fcbe53-1f55-4a1d-8026-4a484a839012 ro quiet noresume cgroup_enable=memory swapaccount=1
** Not tainted
** Kernel log:
[ 2.790933] snd_hda_codec_realtek hdaudioC1D2: mono: mono_out=0x0
[ 2.790934] snd_hda_codec_realtek hdaudioC1D2: dig-out=0x11/0x1e
[ 2.790934] snd_hda_codec_realtek hdaudioC1D2: inputs:
[ 2.790935] snd_hda_codec_realtek hdaudioC1D2: Rear Mic=0x18
[ 2.790936] snd_hda_codec_realtek hdaudioC1D2: Front Mic=0x19
[ 2.790936] snd_hda_codec_realtek hdaudioC1D2: Line=0x1a
[ 2.790937] snd_hda_codec_realtek hdaudioC1D2: CD=0x1c
[ 2.790937] snd_hda_codec_realtek hdaudioC1D2: dig-in=0x1f
[ 2.791694] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.793413] intel_rapl: Found RAPL domain package
[ 2.793414] intel_rapl: Found RAPL domain core
[ 2.793416] intel_rapl: Found RAPL domain uncore
[ 2.793417] intel_rapl: Found RAPL domain dram
[ 2.797174] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.797501] acpi device:70: registered as cooling_device13
[ 2.797560] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 2.804554] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input6
[ 2.805581] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8
[ 2.805611] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
[ 2.805642] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[ 2.805678] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[ 2.805709] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[ 2.805740] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[ 2.805773] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[ 2.820636] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 2.820650] [drm] Initialized i915 1.6.0 20160711 for 0000:00:02.0 on minor 0
[ 2.837257] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 2.839341] fbcon: inteldrmfb (fb0) is primary device
[ 2.853284] usb 3-10.3: New USB device found, idVendor=045e, idProduct=07a5
[ 2.853285] usb 3-10.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.853285] usb 3-10.3: Product: Microsoft\xffffffc2\xffffffae 2.4GHz Transceiver v9.0
[ 2.853286] usb 3-10.3: Manufacturer: Microsoft
[ 2.855249] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
[ 2.855321] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
[ 2.855397] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
[ 2.867430] Console: switching to colour frame buffer device 160x64
[ 2.874716] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.876614] media: Linux media interface: v0.10
[ 2.880173] Linux video capture interface: v2.00
[ 2.882755] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.891427] usbcore: registered new interface driver usbhid
[ 2.891428] usbhid: USB HID core driver
[ 2.893430] hid-generic 0003:06DA:0003.0001: hiddev0,hidraw0: USB HID v1.11 Device [OMRON USB UPS] on usb-0000:00:14.0-11/input0
[ 2.893511] input: Microsoft Microsoft\xffffffc2\xffffffae 2.4GHz Transceiver v9.0 as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10.3/3-10.3:1.0/0003:045E:07A5.0002/input/input18
[ 2.956182] hid-generic 0003:045E:07A5.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Microsoft\xffffffc2\xffffffae 2.4GHz Transceiver v9.0] on usb-0000:00:14.0-10.3/input0
[ 2.956315] input: Microsoft Microsoft\xffffffc2\xffffffae 2.4GHz Transceiver v9.0 as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10.3/3-10.3:1.1/0003:045E:07A5.0003/input/input19
[ 2.956638] hid-generic 0003:045E:07A5.0003: input,hidraw2: USB HID v1.11 Mouse [Microsoft Microsoft\xffffffc2\xffffffae 2.4GHz Transceiver v9.0] on usb-0000:00:14.0-10.3/input1
[ 2.968586] input: Microsoft Microsoft\xffffffc2\xffffffae 2.4GHz Transceiver v9.0 as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10.3/3-10.3:1.2/0003:045E:07A5.0004/input/input20
[ 3.028102] hid-generic 0003:045E:07A5.0004: input,hidraw3: USB HID v1.11 Device [Microsoft Microsoft\xffffffc2\xffffffae 2.4GHz Transceiver v9.0] on usb-0000:00:14.0-10.3/input2
[ 3.048109] clocksource: Switched to clocksource tsc
[ 3.166493] usbcore: registered new interface driver snd-usb-audio
[ 3.166549] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0821)
[ 3.179425] uvcvideo 3-9.1:1.2: Entity type for entity Extension 4 was not initialized!
[ 3.179427] uvcvideo 3-9.1:1.2: Entity type for entity Processing 2 was not initialized!
[ 3.179428] uvcvideo 3-9.1:1.2: Entity type for entity Camera 1 was not initialized!
[ 3.179428] uvcvideo 3-9.1:1.2: Entity type for entity Extension 5 was not initialized!
[ 3.179429] uvcvideo 3-9.1:1.2: Entity type for entity Extension 6 was not initialized!
[ 3.179430] uvcvideo 3-9.1:1.2: Entity type for entity Extension 7 was not initialized!
[ 3.179430] uvcvideo 3-9.1:1.2: Entity type for entity Extension 8 was not initialized!
[ 3.179595] input: UVC Camera (046d:0821) as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.2/input/input21
[ 3.179739] usbcore: registered new interface driver uvcvideo
[ 3.179739] USB Video Class driver (1.1.1)
[ 3.374054] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 3.375318] br0: port 1(eth0) entered blocking state
[ 3.375318] br0: port 1(eth0) entered disabled state
[ 3.375429] device eth0 entered promiscuous mode
[ 3.599045] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
[ 3.728312] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3.806845] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[ 6.437945] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 6.437991] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 6.438054] br0: port 1(eth0) entered blocking state
[ 6.438056] br0: port 1(eth0) entered forwarding state
[ 6.438163] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
[ 7.433988] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 7.435010] NFSD: starting 90-second grace period (net ffffffff854daa00)
[ 7.453709] FS-Cache: Loaded
[ 7.463180] FS-Cache: Netfs 'nfs' registered for caching
[ 7.465791] Key type dns_resolver registered
[ 7.477127] NFS: Registering the id_resolver key type
[ 7.477131] Key type id_resolver registered
[ 7.477131] Key type id_legacy registered
[ 7.946597] random: crng init done
[ 8.364056] usb 3-9.1: reset high-speed USB device number 4 using xhci_hcd
[ 8.941719] Bridge firewalling registered
[ 8.979565] IPv6: ADDRCONF(NETDEV_UP): br-5318ae73c8b7: link is not ready
[ 9.031717] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
[ 12.008015] usb 3-9.1: 1:3: cannot set freq 32000 to ep 0x86
[ 17.070080] fuse init (API version 7.25)
[ 19.944012] usb 3-9.1: 1:3: cannot set freq 32000 to ep 0x86
[ 2714.851108] usb 3-9.1: 1:3: cannot set freq 32000 to ep 0x86
[ 2735.843040] usb 3-9.1: 1:3: cannot set freq 32000 to ep 0x86
[ 2752.995121] usb 3-9.1: 1:3: cannot set freq 32000 to ep 0x86
[ 2862.050974] usb 3-9.1: 1:3: cannot set freq 32000 to ep 0x86
[ 2953.954635] usb 3-9.1: 1:3: cannot set freq 32000 to ep 0x86
[ 2968.838647] usb 3-9.1: 1:3: cannot set freq 32000 to ep 0x86
[ 3001.826526] usb 3-9.1: 1:3: cannot set freq 32000 to ep 0x86
[ 3015.906558] usb 3-9.1: 1:3: cannot set freq 32000 to ep 0x86
[ 3216.224998] usbcore: deregistering interface driver snd-usb-audio
[ 3228.150767] usbcore: registered new interface driver snd-usb-audio
** Model information
sys_vendor: Gigabyte Technology Co., Ltd.
product_name: Z87X-UD4H
product_version: To be filled by O.E.M.
chassis_vendor: Gigabyte Technology Co., Ltd.
chassis_version: To Be Filled By O.E.M.
bios_vendor: American Megatrends Inc.
bios_version: F9
board_vendor: Gigabyte Technology Co., Ltd.
board_name: Z87X-UD4H-CF
board_version: x.x
** Loaded modules:
snd_usb_audio
fuse
ipt_MASQUERADE
nf_nat_masquerade_ipv4
iptable_nat
nf_nat_ipv4
xt_addrtype
nf_nat
br_netfilter
overlay
cpufreq_powersave
cpufreq_conservative
cpufreq_userspace
rpcsec_gss_krb5
nfsv4
dns_resolver
nfs
fscache
nf_conntrack_ipv4
nf_defrag_ipv4
xt_conntrack
nf_conntrack
xt_tcpudp
bridge
stp
llc
iptable_filter
joydev
binfmt_misc
hid_generic
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_v4l2
videobuf2_core
videodev
snd_usbmidi_lib
snd_rawmidi
media
usbhid
snd_seq_device
hid
snd_hda_codec_hdmi
nls_utf8
nls_cp866
vfat
fat
intel_rapl
x86_pkg_temp_thermal
snd_hda_codec_realtek
i915
mxm_wmi
snd_hda_codec_generic
kvm_intel
snd_hda_intel
kvm
snd_hda_codec
snd_hda_core
iTCO_wdt
iTCO_vendor_support
snd_hwdep
snd_pcm_oss
snd_mixer_oss
snd_pcm
irqbypass
drm_kms_helper
efi_pstore
snd_timer
drm
evdev
crct10dif_pclmul
crc32_pclmul
snd
mei_me
ghash_clmulni_intel
soundcore
sg
mei
i2c_algo_bit
lpc_ich
i2c_i801
efivars
shpchp
mfd_core
i2c_smbus
serio_raw
pcspkr
battery
wmi
video
tpm_infineon
tpm_tis
tpm_tis_core
soc_button_array
button
tpm
it87
hwmon_vid
coretemp
nfsd
auth_rpcgss
parport_pc
nfs_acl
ppdev
lockd
lp
grace
parport
sunrpc
efivarfs
ip_tables
x_tables
autofs4
ext4
crc16
jbd2
fscrypto
ecb
mbcache
btrfs
raid10
raid456
async_raid6_recov
async_memcpy
async_pq
async_xor
async_tx
xor
raid6_pq
libcrc32c
crc32c_generic
raid1
raid0
multipath
linear
md_mod
sd_mod
crc32c_intel
e1000e
ahci
libahci
ptp
aesni_intel
libata
xhci_pci
aes_x86_64
ehci_pci
glue_helper
xhci_hcd
lrw
ehci_hcd
gf128mul
ablk_helper
scsi_mod
psmouse
cryptd
usbcore
pps_core
usb_common
fan
thermal
fjes
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 4th Gen Core Processor DRAM Controller [8086:0c00] (rev 06)
Subsystem: Gigabyte Technology Co., Ltd 4th Gen Core Processor DRAM Controller [1458:5000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: hsw_uncore
00:02.0 VGA compatible controller [0300]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller [8086:0412] (rev 06) (prog-if 00 [VGA controller])
Subsystem: Gigabyte Technology Co., Ltd Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller [1458:d000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 32
Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:03.0 Audio device [0403]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller [8086:0c0c] (rev 06)
Subsystem: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller [8086:2010]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 33
Region 0: Memory at f0534000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:14.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI [8086:8c31] (rev 04) (prog-if 30 [XHCI])
Subsystem: Gigabyte Technology Co., Ltd 8 Series/C220 Series Chipset Family USB xHCI [1458:5007]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 26
Region 0: Memory at f0520000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:16.0 Communication controller [0780]: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 [8086:8c3a] (rev 04)
Subsystem: Gigabyte Technology Co., Ltd 8 Series/C220 Series Chipset Family MEI Controller [1458:1c3a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 30
Region 0: Memory at f053f000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:19.0 Ethernet controller [0200]: Intel Corporation Ethernet Connection I217-V [8086:153b] (rev 04)
DeviceName: Onboard LAN
Subsystem: Gigabyte Technology Co., Ltd Ethernet Connection I217-V [1458:e000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 29
Region 0: Memory at f0500000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at f053d000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at f080 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
Kernel modules: e1000e
00:1a.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 [8086:8c2d] (rev 04) (prog-if 20 [EHCI])
Subsystem: Gigabyte Technology Co., Ltd 8 Series/C220 Series Chipset Family USB EHCI [1458:5006]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f053c000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1b.0 Audio device [0403]: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller [8086:8c20] (rev 04)
Subsystem: Gigabyte Technology Co., Ltd 8 Series/C220 Series Chipset High Definition Audio Controller [1458:a002]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 31
Region 0: Memory at f0530000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 [8086:8c10] (rev d4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.4 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev d4) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1c.5 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #6 [8086:8c1a] (rev d4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f0400000-f04fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 [8086:8c26] (rev 04) (prog-if 20 [EHCI])
Subsystem: Gigabyte Technology Co., Ltd 8 Series/C220 Series Chipset Family USB EHCI [1458:5006]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f053b000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1f.0 ISA bridge [0601]: Intel Corporation Z87 Express LPC Controller [8086:8c44] (rev 04)
Subsystem: Gigabyte Technology Co., Ltd Z87 Express LPC Controller [1458:5001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] [8086:8c02] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Gigabyte Technology Co., Ltd 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] [1458:b005]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 27
Region 0: I/O ports at f0d0 [size=8]
Region 1: I/O ports at f0c0 [size=4]
Region 2: I/O ports at f0b0 [size=8]
Region 3: I/O ports at f0a0 [size=4]
Region 4: I/O ports at f060 [size=32]
Region 5: Memory at f053a000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller [8086:8c22] (rev 04)
Subsystem: Gigabyte Technology Co., Ltd 8 Series/C220 Series Chipset Family SMBus Controller [1458:5001]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f0539000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
02:00.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 41) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Bus: primary=02, secondary=03, subordinate=03, sec-latency=32
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
04:00.0 SATA controller [0106]: Marvell Technology Group Ltd. 88SE9172 SATA 6Gb/s Controller [1b4b:9172] (rev 11) (prog-if 01 [AHCI 1.0])
Subsystem: Gigabyte Technology Co., Ltd 88SE9172 SATA 6Gb/s Controller [1458:b000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 28
Region 0: I/O ports at e040 [size=8]
Region 1: I/O ports at e030 [size=4]
Region 2: I/O ports at e020 [size=8]
Region 3: I/O ports at e010 [size=4]
Region 4: I/O ports at e000 [size=16]
Region 5: Memory at f0410000 (32-bit, non-prefetchable) [size=512]
Expansion ROM at f0400000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
** USB devices:
Bus 002 Device 002: ID 8087:8000 Intel Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8008 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 003: ID 045b:0210 Hitachi, Ltd
Bus 004 Device 002: ID 045b:0210 Hitachi, Ltd
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 004: ID 046d:0821 Logitech, Inc. HD Webcam C910
Bus 003 Device 002: ID 045b:0209 Hitachi, Ltd
Bus 003 Device 005: ID 06da:0003 Phoenixtec Power Co., Ltd 1300VA UPS
Bus 003 Device 006: ID 045e:07a5 Microsoft Corp. Wireless Receiver 1461C
Bus 003 Device 003: ID 045b:0209 Hitachi, Ltd
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: stretch/sid
APT prefers testing
APT policy: (990, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 4.8.0-1-amd64 (SMP w/8 CPU cores)
Locale: LANG=ru_RU.utf8, LC_CTYPE=ru_RU.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-4.8.0-1-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.125
ii kmod 23-1
ii linux-base 4.5
Versions of packages linux-image-4.8.0-1-amd64 recommends:
ii firmware-linux-free 3.4
ii irqbalance 1.1.0-2
Versions of packages linux-image-4.8.0-1-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-efi-amd64 2.02~beta3-3
pn linux-doc-4.8 <none>
Versions of packages linux-image-4.8.0-1-amd64 is related to:
ii firmware-amd-graphics 20160824-1
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 20160824-1
pn firmware-libertas <none>
ii firmware-linux-nonfree 20160824-1
ii firmware-misc-nonfree 20160824-1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
ii firmware-realtek 20160824-1
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
--- End Message ---