--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-4.5.0-1-686: [i686/GeodeLX] kernel 3.16 to 4.5 breaks X
- From: Martin-Éric Racine <martin-eric.racine@iki.fi>
- Date: Thu, 21 Apr 2016 13:38:20 +0300
- Message-id: <146123510008.940.7067287696963338584.reportbug@geode.lan>
Package: src:linux
Version: 4.5.1-1
Severity: important
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256
On this host, booting Xorg via GDM3 fails since kernel 4 entered testing.
However, the exact same Xorg succesfully launches under kernel 3.16.
dmesg and Xorg.log under both kernels are attached.
- -- Package-specific info:
** Kernel log: boot messages should be attached
** Model information
** Network interface configuration:
auto lo
iface lo inet loopback
** PCI devices:
00:01.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] CS5536 [Geode companion] Host Bridge [1022:2080] (rev 31)
Subsystem: FIRST INTERNATIONAL Computer Inc CS5536 [Geode companion] Host Bridge [1509:801b]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 248, Cache Line Size: 32 bytes
Region 0: I/O ports at ac1c [size=4]
Region 1: I/O ports at 9e00 [size=8]
00:01.1 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD] Geode LX Video [1022:2081] (prog-if 00 [VGA controller])
Subsystem: FIRST INTERNATIONAL Computer Inc Geode LX Video [1509:801b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at d0000000 (32-bit, non-prefetchable) [size=256M]
Region 1: Memory at efff0000 (32-bit, non-prefetchable) [size=16K]
Region 2: Memory at effec000 (32-bit, non-prefetchable) [size=16K]
Region 3: Memory at effe8000 (32-bit, non-prefetchable) [size=16K]
Region 4: Memory at efff8000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at <unassigned> [disabled]
Kernel modules: lxfb
00:01.2 Entertainment encryption device [1010]: Advanced Micro Devices, Inc. [AMD] Geode LX AES Security Block [1022:2082]
Subsystem: FIRST INTERNATIONAL Computer Inc Geode LX AES Security Block [1509:801b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at efff4000 (32-bit, non-prefetchable) [size=16K]
Kernel driver in use: Geode LX AES
Kernel modules: geode_rng, geode_aes
00:0d.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8100/8101L/8139 PCI Fast Ethernet Adapter [10ec:8139] (rev 10)
Subsystem: FIRST INTERNATIONAL Computer Inc RTL-8100/8101L/8139 PCI Fast Ethernet Adapter [1509:801b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at fc00 [size=256]
Region 1: Memory at effff000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: 8139too
Kernel modules: 8139cp, 8139too
00:0f.0 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD] CS5536 [Geode companion] ISA [1022:2090] (rev 03)
Subsystem: FIRST INTERNATIONAL Computer Inc CS5536 [Geode companion] ISA [1509:801b]
Control: I/O+ Mem- BusMaster- SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: I/O ports at 6000 [size=8]
Region 1: I/O ports at 6100 [size=256]
Region 2: I/O ports at 6200 [size=64]
Region 3: I/O ports at 1000 [size=32]
Region 4: I/O ports at 9d00 [size=128]
Region 5: I/O ports at 9c00 [size=64]
Kernel modules: cs5535_mfd
00:0f.2 IDE interface [0101]: Advanced Micro Devices, Inc. [AMD] CS5536 [Geode companion] IDE [1022:209a] (rev 01) (prog-if 80 [Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 248, Cache Line Size: 32 bytes
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
Region 4: I/O ports at ff00 [size=16]
Kernel driver in use: pata_cs5536
Kernel modules: pata_amd, pata_cs5536, ata_generic
00:0f.3 Multimedia audio controller [0401]: Advanced Micro Devices, Inc. [AMD] CS5536 [Geode companion] Audio [1022:2093] (rev 01)
Subsystem: FIRST INTERNATIONAL Computer Inc CS5536 [Geode companion] Audio [1509:801b]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 11
Region 0: I/O ports at fe00 [size=128]
Kernel driver in use: snd_cs5535audio
Kernel modules: snd_cs5535audio
00:0f.4 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] CS5536 [Geode companion] OHC [1022:2094] (rev 02) (prog-if 10 [OHCI])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 11
Region 0: Memory at efffe000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:0f.5 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] CS5536 [Geode companion] EHC [1022:2095] (rev 02) (prog-if 20 [EHCI])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 11
Region 0: Memory at efffd000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 046d:c00e Logitech, Inc. M-BJ58/M-BJ69 Optical Wheel Mouse
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
- -- System Information:
Debian Release: stretch/sid
APT prefers testing
APT policy: (1001, 'testing'), (1001, 'stable')
Architecture: i386 (i586)
Kernel: Linux 3.16.0-4-586
Locale: LANG=fi_FI.UTF-8, LC_CTYPE=fi_FI.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-4.5.0-1-686 depends on:
ii debconf [debconf-2.0] 1.5.59
ii initramfs-tools [linux-initramfs-tool] 0.123
ii kmod 22-1.1
ii linux-base 4.0
Versions of packages linux-image-4.5.0-1-686 recommends:
ii firmware-linux-free 3.4
ii irqbalance 1.1.0-2
ii libc6-i686 2.22-6
Versions of packages linux-image-4.5.0-1-686 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02~beta2-36
pn linux-doc-4.5 <none>
Versions of packages linux-image-4.5.0-1-686 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 20160110-1
pn firmware-libertas <none>
ii firmware-linux 20160110-1
ii firmware-linux-nonfree 20160110-1
ii firmware-misc-nonfree [firmware-ralink] 20160110-1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
- -- debconf information:
linux-image-4.5.0-1-686/prerm/removing-running-kernel-4.5.0-1-686: true
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=chib
-----END PGP SIGNATURE-----
[ 0.000000] Linux version 4.5.0-1-686 (debian-kernel@lists.debian.org) (gcc version 5.3.1 20160409 (Debian 5.3.1-14) ) #1 SMP Debian 4.5.1-1 (2016-04-14)
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using 'lazy' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000037faffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000037fb0000-0x0000000037fb2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000037fb3000-0x0000000037fbffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000ffff0000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] SMBIOS 2.2 present.
[ 0.000000] DMI: First International Computer, Inc. ION603/ION603, BIOS 6.00 PG 11/08/2007
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x37fb0 max_arch_pfn = 0x100000
[ 0.000000] MTRR: Disabled
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
[ 0.000000] BRK [0x01897000, 0x01897fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x34870000-0x3642ffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F5910 000014 (v00 AMDGX3)
[ 0.000000] ACPI: RSDT 0x0000000037FB3000 000028 (v01 AMDGX3 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 0x0000000037FB3080 000074 (v01 AMDGX3 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 16, using default 8 (20160108/tbfadt-704)
[ 0.000000] ACPI: DSDT 0x0000000037FB3100 001581 (v01 AMDGX3 AWRDACPI 00001017 MSFT 03000000)
[ 0.000000] ACPI: FACS 0x0000000037FB0000 000040
[ 0.000000] 7MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x00000000377fdfff]
[ 0.000000] HighMem [mem 0x00000000377fe000-0x0000000037faffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x0000000037faffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000037faffff]
[ 0.000000] On node 0 totalpages: 229197
[ 0.000000] free_area_init_node: node 0, pgdat c1756200, node_mem_map f701e024
[ 0.000000] DMA zone: 36 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] Normal zone: 1962 pages used for memmap
[ 0.000000] Normal zone: 223230 pages, LIFO batch:31
[ 0.000000] HighMem zone: 1970 pages, LIFO batch:0
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x9c10
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] No local APIC present or hardware disabled
[ 0.000000] APIC: disable apic facility
[ 0.000000] APIC: switched to apic NOOP
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0x37fc0000-0xfffeffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 17 pages/cpu @f7007000 s40140 r0 d29492 u69632
[ 0.000000] pcpu-alloc: s40140 r0 d29492 u69632 alloc=17*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227199
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.5.0-1-686 root=UUID=97b2628b-28a5-49f2-85f7-495728b3bef8 ro panic=15 pnpbios=off quiet splash cs5535audio.ac97_quirk=1
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000377fe:00037fb0)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 870540K/916788K available (5385K kernel code, 618K rwdata, 1588K rodata, 668K init, 468K bss, 46248K reserved, 0K cma-reserved, 7880K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc176d000 - 0xc1814000 ( 668 kB)
.data : 0xc15429e2 - 0xc176bac0 (2212 kB)
.text : 0xc1000000 - 0xc15429e2 (5386 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
[ 0.000000] NR_IRQS:2304 nr_irqs:32 16
[ 0.000000] CPU 0 irqstacks, hard=f682c000 soft=f682e000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 498.075 MHz processor
[ 0.008031] Calibrating delay loop (skipped), value calculated using timer frequency.. 996.15 BogoMIPS (lpj=1992300)
[ 0.008055] pid_max: default: 32768 minimum: 301
[ 0.008157] ACPI: Core revision 20160108
[ 0.020505] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.020542] ACPI: setting ELCR to 0200 (from 0c20)
[ 0.020727] Security Framework initialized
[ 0.020743] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.020786] AppArmor: AppArmor disabled by boot time parameter
[ 0.020875] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.020894] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.022597] Disabling memory control group subsystem
[ 0.022777] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.022794] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.040466] Freeing SMP alternatives memory: 24K (c1814000 - c181a000)
[ 0.051135] ftrace: allocating 22653 entries in 45 pages
[ 0.104335] smpboot: weird, boot CPU (#0) not listed by the BIOS
[ 0.104350] smpboot: SMP motherboard not detected
[ 0.104360] smpboot: SMP disabled
[ 0.104372] smpboot: Local APIC not detected. Using dummy APIC emulation.
[ 0.104487] Performance Events: no PMU driver, software events only.
[ 0.110343] x86: Booted up 1 node, 1 CPUs
[ 0.110365] smpboot: Total of 1 processors activated (996.15 BogoMIPS)
[ 0.110720] NMI watchdog: disabled (cpu0): hardware events not enabled
[ 0.110734] NMI watchdog: Shutting down hard lockup detector on all cpus
[ 0.111052] devtmpfs: initialized
[ 0.113127] PM: Registering ACPI NVS region [mem 0x37fb0000-0x37fb2fff] (12288 bytes)
[ 0.113745] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.114044] pinctrl core: initialized pinctrl subsystem
[ 0.115175] NET: Registered protocol family 16
[ 0.116575] cpuidle: using governor ladder
[ 0.116598] cpuidle: using governor menu
[ 0.116916] clocksource: pit: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1601818034827 ns
[ 0.117271] ACPI: bus type PCI registered
[ 0.117287] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.122162] PCI: PCI BIOS revision 2.10 entry at 0xfad30, last bus=0
[ 0.122175] PCI: Using configuration type 1 for base access
[ 0.130659] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.132853] ACPI: Added _OSI(Module Device)
[ 0.132872] ACPI: Added _OSI(Processor Device)
[ 0.132886] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.132900] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.146778] ACPI: Interpreter enabled
[ 0.146922] ACPI: (supports S0 S1 S5)
[ 0.146934] ACPI: Using PIC for interrupt routing
[ 0.147077] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.165489] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.165530] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[ 0.165568] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.165596] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.165920] acpi PNP0A03:00: host bridge window [io 0x0cf8-0x0cff] (ignored)
[ 0.165943] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7 window] (ignored)
[ 0.165964] acpi PNP0A03:00: host bridge window [io 0x0d00-0xac17 window] (ignored)
[ 0.165985] acpi PNP0A03:00: host bridge window [io 0xac20-0xffff window] (ignored)
[ 0.166007] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff window] (ignored)
[ 0.166028] acpi PNP0A03:00: host bridge window [mem 0x000c8000-0x000dffff window] (ignored)
[ 0.166050] acpi PNP0A03:00: host bridge window [mem 0x40500000-0xfebfffff window] (ignored)
[ 0.166063] PCI: root bus 00: using default resources
[ 0.167102] PCI host bridge to bus 0000:00
[ 0.167125] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.167147] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.167169] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.167312] pci 0000:00:01.0: [1022:2080] type 00 class 0x060000
[ 0.167466] pci 0000:00:01.0: reg 0x10: [io 0xac1c-0xac1f]
[ 0.167582] pci 0000:00:01.0: reg 0x14: [io 0x9e00-0x9e07]
[ 0.168958] pci 0000:00:01.1: [1022:2081] type 00 class 0x030000
[ 0.169263] pci 0000:00:01.1: reg 0x10: [mem 0xd0000000-0xdfffffff]
[ 0.169481] pci 0000:00:01.1: reg 0x14: [mem 0xefff0000-0xefff3fff]
[ 0.169698] pci 0000:00:01.1: reg 0x18: [mem 0xeffec000-0xeffeffff]
[ 0.169916] pci 0000:00:01.1: reg 0x1c: [mem 0xeffe8000-0xeffebfff]
[ 0.170133] pci 0000:00:01.1: reg 0x20: [mem 0xefff8000-0xefffbfff]
[ 0.171390] pci 0000:00:01.2: [1022:2082] type 00 class 0x101000
[ 0.171653] pci 0000:00:01.2: reg 0x10: [mem 0xefff4000-0xefff7fff]
[ 0.173551] pci 0000:00:0d.0: [10ec:8139] type 00 class 0x020000
[ 0.173593] pci 0000:00:0d.0: reg 0x10: [io 0xfc00-0xfcff]
[ 0.173625] pci 0000:00:0d.0: reg 0x14: [mem 0xeffff000-0xeffff0ff]
[ 0.173742] pci 0000:00:0d.0: supports D1 D2
[ 0.173762] pci 0000:00:0d.0: PME# supported from D1 D2 D3hot D3cold
[ 0.173978] pci 0000:00:0d.0: System wakeup disabled by ACPI
[ 0.174532] pci 0000:00:0f.0: [1022:2090] type 00 class 0x060100
[ 0.174854] pci 0000:00:0f.0: reg 0x10: [io 0x6000-0x6007]
[ 0.175121] pci 0000:00:0f.0: reg 0x14: [io 0x6100-0x61ff]
[ 0.175388] pci 0000:00:0f.0: reg 0x18: [io 0x6200-0x623f]
[ 0.175655] pci 0000:00:0f.0: reg 0x1c: [io 0x0000-0x001f]
[ 0.175928] pci 0000:00:0f.0: reg 0x20: [io 0x9d00-0x9d7f]
[ 0.176200] pci 0000:00:0f.0: reg 0x24: [io 0x9c00-0x9c3f]
[ 0.177352] pci 0000:00:0f.2: [1022:209a] type 00 class 0x010180
[ 0.178330] pci 0000:00:0f.2: reg 0x20: [io 0xff00-0xff0f]
[ 0.178774] pci 0000:00:0f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.178793] pci 0000:00:0f.2: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.178814] pci 0000:00:0f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.178833] pci 0000:00:0f.2: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.179661] pci 0000:00:0f.3: [1022:2093] type 00 class 0x040100
[ 0.180024] pci 0000:00:0f.3: reg 0x10: [io 0xfe00-0xfe7f]
[ 0.181933] pci 0000:00:0f.4: [1022:2094] type 00 class 0x0c0310
[ 0.182324] pci 0000:00:0f.4: reg 0x10: [mem 0xefffe000-0xefffefff]
[ 0.183949] pci 0000:00:0f.4: PME# supported from D0 D3hot D3cold
[ 0.184309] pci 0000:00:0f.4: System wakeup disabled by ACPI
[ 0.184912] pci 0000:00:0f.5: [1022:2095] type 00 class 0x0c0320
[ 0.185256] pci 0000:00:0f.5: reg 0x10: [mem 0xefffd000-0xefffdfff]
[ 0.186866] pci 0000:00:0f.5: PME# supported from D0 D3hot D3cold
[ 0.187191] pci 0000:00:0f.5: System wakeup disabled by ACPI
[ 0.187713] pci_bus 0000:00: on NUMA node 0
[ 0.189199] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 0.190196] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 10 *11)
[ 0.191025] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 11) *0, disabled.
[ 0.192048] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 11) *0
[ 0.194264] ACPI: Enabled 2 GPEs in block 00 to 1F
[ 0.195243] vgaarb: setting as boot device: PCI:0000:00:01.1
[ 0.195263] vgaarb: device added: PCI:0000:00:01.1,decodes=io+mem,owns=io+mem,locks=none
[ 0.195283] vgaarb: loaded
[ 0.195297] vgaarb: bridge control possible 0000:00:01.1
[ 0.196089] PCI: Using ACPI for IRQ routing
[ 0.196106] PCI: pci_cache_line_size set to 32 bytes
[ 0.196563] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.196580] e820: reserve RAM buffer [mem 0x37fb0000-0x37ffffff]
[ 0.198189] clocksource: Switched to clocksource pit
[ 0.264299] VFS: Disk quotas dquot_6.6.0
[ 0.264404] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.265323] pnp: PnP ACPI init
[ 0.266429] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.266456] system 00:00: [mem 0x37fb0000-0x37fbffff] could not be reserved
[ 0.266480] system 00:00: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.266504] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.266528] system 00:00: [mem 0x00100000-0x37faffff] could not be reserved
[ 0.266551] system 00:00: [mem 0x40400000-0x4043ffff] has been reserved
[ 0.266574] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.266605] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.268209] pnp 00:01: disabling [io 0x0010-0x001f] because it overlaps 0000:00:0f.0 BAR 3 [io 0x0000-0x001f]
[ 0.268537] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.268566] system 00:01: [io 0x0480-0x048f] has been reserved
[ 0.268594] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.268917] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.268976] pnp: PnP ACPI: found 3 devices
[ 0.269000] PnPBIOS: Disabled
[ 0.321616] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.321690] clocksource: Switched to clocksource acpi_pm
[ 0.321767] pci 0000:00:0f.0: BAR 3: assigned [io 0x1000-0x101f]
[ 0.321922] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.321944] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.322175] NET: Registered protocol family 2
[ 0.323329] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.323502] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.323715] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.323907] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.323963] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.324308] NET: Registered protocol family 1
[ 0.324477] pci 0000:00:01.1: Video device with shadowed ROM
[ 0.327131] ACPI: PCI Interrupt Link [LNKD] BIOS reported IRQ 0, using IRQ 11
[ 0.327148] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 0.327161] PCI: setting IRQ 11 as level-triggered
[ 0.397097] PCI: CLS 32 bytes, default 32
[ 0.397443] Unpacking initramfs...
[ 5.416982] Freeing initrd memory: 28416K (f4870000 - f6430000)
[ 5.418200] simple-framebuffer simple-framebuffer.0: framebuffer at 0xd0000000, 0x1d5000 bytes, mapped to 0xf8200000
[ 5.418227] simple-framebuffer simple-framebuffer.0: format=x8r8g8b8, mode=800x600x32, linelength=3200
[ 5.446237] Console: switching to colour frame buffer device 100x37
[ 5.473132] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
[ 5.488767] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 5.488917] audit: initializing netlink subsys (disabled)
[ 5.489008] audit: type=2000 audit(1461233625.485:1): initialized
[ 5.490270] Initialise system trusted keyring
[ 5.490951] zbud: loaded
[ 5.496900] Key type asymmetric registered
[ 5.496929] Asymmetric key parser 'x509' registered
[ 5.497103] bounce: pool size: 64 pages
[ 5.497223] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 5.497418] io scheduler noop registered
[ 5.497443] io scheduler deadline registered
[ 5.497533] io scheduler cfq registered (default)
[ 5.498253] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 5.498335] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 5.498646] GHES: HEST is not enabled!
[ 5.498836] isapnp: Scanning for PnP cards...
[ 5.854593] isapnp: No Plug & Play device found
[ 5.854984] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 5.858180] Linux agpgart interface v0.103
[ 5.859394] Failed to find cpu0 device node
[ 5.859787] Unable to detect cache hierarchy from DT for CPU 0
[ 5.860413] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 6.738008] i8042: Can't read CTR while initializing i8042
[ 6.738540] tsc: Refined TSC clocksource calibration: 498.050 MHz
[ 6.738564] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0xe5bb2e969b, max_idle_ns: 881590439220 ns
[ 6.738621] clocksource: Switched to clocksource tsc
[ 6.738656] i8042: probe of i8042 failed with error -5
[ 6.739441] mousedev: PS/2 mouse device common for all mice
[ 6.740494] rtc_cmos 00:02: RTC can wake from S4
[ 6.741122] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 6.741191] rtc_cmos 00:02: alarms up to one day, 242 bytes nvram
[ 6.741400] ledtrig-cpu: registered to indicate activity on CPUs
[ 6.744220] NET: Registered protocol family 10
[ 6.745437] mip6: Mobile IPv6
[ 6.745464] NET: Registered protocol family 17
[ 6.745500] mpls_gso: MPLS GSO support
[ 6.745533] mce: Unable to init device /dev/mcelog (rc: -5)
[ 6.746358] microcode: AMD CPU family 0x5 not supported
[ 6.746430] Using IPI No-Shortcut mode
[ 6.747718] registered taskstats version 1
[ 6.747807] Loading compiled-in X.509 certificates
[ 6.760776] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
[ 6.760885] zswap: loaded using pool lzo/zbud
[ 6.762652] rtc_cmos 00:02: setting system clock to 2016-04-21 10:13:47 UTC (1461233627)
[ 6.763084] PM: Hibernation image not present or could not be loaded.
[ 6.764364] Freeing unused kernel memory: 668K (c176d000 - c1814000)
[ 6.764622] Write protecting the kernel text: 5388k
[ 6.764904] Write protecting the kernel read-only data: 1592k
[ 7.922772] random: systemd-udevd urandom read with 27 bits of entropy available
[ 8.079234] button: module verification failed: signature and/or required key missing - tainting kernel
[ 8.089031] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 8.089063] ACPI: Power Button [PWRB]
[ 8.089601] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 8.089623] ACPI: Sleep Button [SLPB]
[ 8.090174] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 8.090195] ACPI: Power Button [PWRF]
[ 8.179673] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 8.179708] 8139cp 0000:00:0d.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 8.195153] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 8.227723] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 8.236462] 8139too 0000:00:0d.0 eth0: RealTek RTL8139 at 0x0001fc00, 00:40:ca:9d:f0:50, IRQ 11
[ 8.257300] SCSI subsystem initialized
[ 8.266796] ACPI: bus type USB registered
[ 8.267071] usbcore: registered new interface driver usbfs
[ 8.267195] usbcore: registered new interface driver hub
[ 8.268304] usbcore: registered new device driver usb
[ 8.278405] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 8.286064] ehci-pci: EHCI PCI platform driver
[ 8.286718] ehci-pci 0000:00:0f.5: EHCI Host Controller
[ 8.286777] ehci-pci 0000:00:0f.5: new USB bus registered, assigned bus number 1
[ 8.287101] ehci-pci 0000:00:0f.5: irq 11, io mem 0xefffd000
[ 8.294124] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 8.297668] ehci-pci 0000:00:0f.5: USB 2.0 started, EHCI 1.00
[ 8.298002] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 8.298024] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.298043] usb usb1: Product: EHCI Host Controller
[ 8.298062] usb usb1: Manufacturer: Linux 4.5.0-1-686 ehci_hcd
[ 8.298080] usb usb1: SerialNumber: 0000:00:0f.5
[ 8.306830] hub 1-0:1.0: USB hub found
[ 8.306894] hub 1-0:1.0: 4 ports detected
[ 8.313937] ohci-pci: OHCI PCI platform driver
[ 8.314556] ohci-pci 0000:00:0f.4: OHCI PCI host controller
[ 8.314604] ohci-pci 0000:00:0f.4: new USB bus registered, assigned bus number 2
[ 8.314731] ohci-pci 0000:00:0f.4: irq 11, io mem 0xefffe000
[ 8.325588] libata version 3.00 loaded.
[ 8.380188] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 8.380216] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.380235] usb usb2: Product: OHCI PCI host controller
[ 8.380254] usb usb2: Manufacturer: Linux 4.5.0-1-686 ohci_hcd
[ 8.380272] usb usb2: SerialNumber: 0000:00:0f.4
[ 8.383780] hub 2-0:1.0: USB hub found
[ 8.383864] hub 2-0:1.0: 4 ports detected
[ 8.398664] scsi host0: pata_cs5536
[ 8.404246] scsi host1: pata_cs5536
[ 8.404868] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 8.404883] ata2: DUMMY
[ 8.563616] ata1.00: ATA-7: FUJITSU MHW2040AT, 0000000B, max UDMA/100
[ 8.563641] ata1.00: 78140160 sectors, multi 16: LBA
[ 8.569183] ata1.00: configured for UDMA/100
[ 8.573255] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHW2040A 000B PQ: 0 ANSI: 5
[ 8.619572] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.3 GiB)
[ 8.619881] sd 0:0:0:0: [sda] Write Protect is off
[ 8.619907] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 8.620149] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.727249] sda: sda1 sda2 < sda5 >
[ 8.732736] sd 0:0:0:0: [sda] Attached SCSI disk
[ 8.872115] usb 2-3: new low-speed USB device number 2 using ohci-pci
[ 9.081223] usb 2-3: New USB device found, idVendor=046d, idProduct=c00e
[ 9.081251] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 9.081270] usb 2-3: Product: USB-PS/2 Optical Mouse
[ 9.081289] usb 2-3: Manufacturer: Logitech
[ 9.106356] hidraw: raw HID events driver (C) Jiri Kosina
[ 9.120430] usbcore: registered new interface driver usbhid
[ 9.120450] usbhid: USB HID core driver
[ 9.132897] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:0f.4/usb2/2-3/2-3:1.0/0003:046D:C00E.0001/input/input3
[ 9.135090] hid-generic 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:0f.4-3/input0
[ 17.669100] PM: Starting manual resume from disk
[ 17.669132] PM: Hibernation image partition 8:5 present
[ 17.669145] PM: Looking for hibernation image.
[ 17.726189] PM: Image not found (code -22)
[ 17.726209] PM: Hibernation image not present or could not be loaded.
[ 17.903635] random: nonblocking pool is initialized
[ 22.817503] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 25.376232] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 25.377198] systemd[1]: Detected architecture x86.
[ 25.405117] systemd[1]: Set hostname to <geode>.
[ 32.550879] systemd[1]: Created slice User and Session Slice.
[ 32.556540] systemd[1]: Created slice System Slice.
[ 32.556917] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 32.557631] systemd[1]: Listening on Journal Audit Socket.
[ 32.558741] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 32.559026] systemd[1]: Listening on udev Kernel Socket.
[ 32.559345] systemd[1]: Listening on udev Control Socket.
[ 32.559708] systemd[1]: Listening on Journal Socket (/dev/log).
[ 32.559973] systemd[1]: Listening on Syslog Socket.
[ 32.564508] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 32.564673] systemd[1]: Reached target Slices.
[ 32.565076] systemd[1]: Listening on Journal Socket.
[ 32.573387] systemd[1]: Mounting POSIX Message Queue File System...
[ 32.587167] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 32.605138] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 32.650279] systemd[1]: Starting Journal Service...
[ 32.655818] systemd[1]: Mounting Debug File System...
[ 32.693178] systemd[1]: Reached target Remote File Systems (Pre).
[ 32.693516] systemd[1]: Reached target Remote File Systems.
[ 32.878215] systemd[1]: Starting Load Kernel Modules...
[ 32.894644] systemd[1]: Mounting Huge Pages File System...
[ 32.907718] systemd[1]: Starting Set the console keyboard layout...
[ 32.907915] systemd[1]: Reached target System Time Synchronized.
[ 32.952630] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 32.990409] systemd[1]: Reached target Encrypted Volumes.
[ 32.990617] systemd[1]: Reached target User and Group Name Lookups.
[ 33.205692] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 33.497042] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 33.551060] systemd[1]: Mounted Debug File System.
[ 33.552009] systemd[1]: Mounted Huge Pages File System.
[ 33.557009] systemd[1]: Mounted POSIX Message Queue File System.
[ 33.600527] systemd[1]: Started Remount Root and Kernel File Systems.
[ 33.846241] lp: driver loaded but no devices found
[ 33.890011] ppdev: user-space parallel port driver
[ 34.288234] Key type encrypted registered
[ 34.371403] systemd[1]: Started Journal Service.
[ 38.191670] systemd-journald[168]: Received request to flush runtime journal from PID 1
[ 42.053130] ACPI: AC Adapter [AC] (on-line)
[ 42.413370] ACPI Warning: SystemIO range 0x0000000000006100-0x00000000000061FF conflicts with OpRegion 0x0000000000006100-0x00000000000061FF (\_SB.GPIO) (20160108/utaddress-255)
[ 42.413420] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 42.413595] cs5535-mfd 0000:00:0f.0: MFD add devices failed: -16
[ 42.414188] cs5535-mfd: probe of 0000:00:0f.0 failed with error -16
[ 42.655625] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 42.698620] AMD Geode RNG detected
[ 42.826035] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[ 42.826056] PCI: setting IRQ 10 as level-triggered
[ 43.068249] Geode LX AES 0000:00:01.2: GEODE AES engine enabled.
[ 46.507633] Adding 1646624k swap on /dev/sda5. Priority:-1 extents:1 across:1646624k FS
[ 66.091721] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 66.093185] 8139too 0000:00:0d.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 116.913187] x86/PAT: Xorg:998 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[ 116.913723] ------------[ cut here ]------------
[ 116.913761] WARNING: CPU: 0 PID: 998 at /build/linux-Efn4pv/linux-4.5.1/arch/x86/mm/pat.c:986 untrack_pfn+0xbf/0xd0()
[ 116.913773] Modules linked in: cpufreq_conservative(E) cpufreq_userspace(E) cpufreq_powersave(E) cpufreq_stats(E) scx200_acb(E) ecb(E) snd_cs5535audio(E) snd_ac97_codec(E) geode_aes(E) geode_rng(E) sg(E) rng_core(E) snd_pcm(E) snd_timer(E) snd(E) soundcore(E) ac97_bus(E) cs5535_mfd(E) acpi_cpufreq(E) tpm_tis(E) evdev(E) ac(E) tpm(E) processor(E) ecryptfs(E) cbc(E) hmac(E) encrypted_keys(E) parport_pc(E) ppdev(E) lp(E) parport(E) autofs4(E) msr(E) ext4(E) crc16(E) mbcache(E) jbd2(E) hid_generic(E) usbhid(E) hid(E) sd_mod(E) ata_generic(E) pata_cs5536(E) ohci_pci(E) ehci_pci(E) libata(E) ohci_hcd(E) ehci_hcd(E) usbcore(E) usb_common(E) 8139too(E) scsi_mod(E) 8139cp(E) mii(E) button(E)
[ 116.914011] CPU: 0 PID: 998 Comm: Xorg Tainted: G E 4.5.0-1-686 #1 Debian 4.5.1-1
[ 116.914026] Hardware name: First International Computer, Inc. ION603/ION603, BIOS 6.00 PG 11/08/2007
[ 116.914039] 00203286 6d1e16d9 f41a7d7c c12bdfdc 00000000 c1620568 c105b2bd c16279b0
[ 116.914075] 00000000 000003e6 c1620568 000003da c104f16f 00000009 c104f16f f416e630
[ 116.914110] aeb10000 00000000 f41a7d8c c105b3c2 00000009 00000000 f41a7db8 c104f16f
[ 116.914144] Call Trace:
[ 116.914172] [<c12bdfdc>] ? dump_stack+0x55/0x79
[ 116.914202] [<c105b2bd>] ? warn_slowpath_common+0x8d/0xc0
[ 116.914226] [<c104f16f>] ? untrack_pfn+0xbf/0xd0
[ 116.914248] [<c104f16f>] ? untrack_pfn+0xbf/0xd0
[ 116.914272] [<c105b3c2>] ? warn_slowpath_null+0x22/0x30
[ 116.914294] [<c104f16f>] ? untrack_pfn+0xbf/0xd0
[ 116.914327] [<c1174c73>] ? unmap_single_vma+0x673/0x680
[ 116.914355] [<c1175d93>] ? unmap_vmas+0x53/0xa0
[ 116.914379] [<c117bc8f>] ? exit_mmap+0x7f/0x140
[ 116.914406] [<c1058a07>] ? mmput+0x57/0xf0
[ 116.914430] [<c1059a36>] ? copy_process.part.34+0xa46/0x1440
[ 116.914458] [<c105a5f5>] ? _do_fork+0xe5/0x3d0
[ 116.914483] [<c105a9cc>] ? SyS_clone+0x2c/0x30
[ 116.914506] [<c1001aa0>] ? do_syscall_32_irqs_on+0x50/0xb0
[ 116.914533] [<c1540aed>] ? entry_INT80_32+0x31/0x31
[ 116.914551] ---[ end trace 1f55bc51b2556927 ]---
[ 116.995273] x86/PAT: Xorg:998 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[ 122.079251] x86/PAT: Xorg:1054 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[ 122.109710] x86/PAT: Xorg:1054 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[ 125.405807] x86/PAT: Xorg:1089 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[ 125.436396] x86/PAT: Xorg:1089 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[ 128.564811] x86/PAT: Xorg:1124 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[ 128.597590] x86/PAT: Xorg:1124 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[ 133.201261] x86/PAT: Xorg:1161 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[ 133.231766] x86/PAT: Xorg:1161 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[ 139.223533] x86/PAT: Xorg:1230 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[ 139.253874] x86/PAT: Xorg:1230 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[ 142.637965] x86/PAT: Xorg:1271 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[ 142.668392] x86/PAT: Xorg:1271 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[ 146.326923] x86/PAT: Xorg:1305 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[ 146.361277] x86/PAT: Xorg:1305 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[ 149.883986] x86/PAT: Xorg:1339 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[ 149.914362] x86/PAT: Xorg:1339 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[ 153.089631] x86/PAT: Xorg:1373 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[ 153.119953] x86/PAT: Xorg:1373 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[ 156.298740] x86/PAT: Xorg:1407 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[ 156.328444] x86/PAT: Xorg:1407 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[ 159.513976] x86/PAT: Xorg:1441 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[ 159.544889] x86/PAT: Xorg:1441 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[ 162.730944] x86/PAT: Xorg:1475 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[ 162.761226] x86/PAT: Xorg:1475 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[ 165.939330] x86/PAT: Xorg:1509 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[ 165.969955] x86/PAT: Xorg:1509 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[ 169.234325] x86/PAT: Xorg:1544 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[ 169.264831] x86/PAT: Xorg:1544 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[ 172.455382] x86/PAT: Xorg:1578 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[ 172.485683] x86/PAT: Xorg:1578 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[ 175.991655] x86/PAT: Xorg:1612 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[ 176.026978] x86/PAT: Xorg:1612 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[ 179.702421] x86/PAT: Xorg:1646 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[ 179.736815] x86/PAT: Xorg:1646 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[ 182.945093] x86/PAT: Xorg:1680 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[ 182.975301] x86/PAT: Xorg:1680 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[ 186.358914] x86/PAT: Xorg:1714 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[ 186.388685] x86/PAT: Xorg:1714 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[ 189.570929] x86/PAT: Xorg:1749 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[ 189.601159] x86/PAT: Xorg:1749 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[ 192.788854] x86/PAT: Xorg:1783 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[ 192.819063] x86/PAT: Xorg:1783 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[ 196.006308] x86/PAT: Xorg:1817 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[ 196.036183] x86/PAT: Xorg:1817 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[ 199.203749] x86/PAT: Xorg:1851 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[ 199.234669] x86/PAT: Xorg:1851 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[ 202.478325] x86/PAT: Xorg:1885 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[ 202.508771] x86/PAT: Xorg:1885 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[ 206.069769] x86/PAT: Xorg:1919 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[ 206.104433] x86/PAT: Xorg:1919 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[ 209.745192] x86/PAT: Xorg:1953 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[ 209.775235] x86/PAT: Xorg:1953 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[ 245.354] (--) Log file renamed from "/var/log/Xorg.pid-2341.log" to "/var/log/Xorg.0.log"
[ 245.359]
X.Org X Server 1.18.3
Release Date: 2016-04-04
[ 245.362] X Protocol Version 11, Revision 0
[ 245.363] Build Operating System: Linux 3.16.0-4-amd64 i686 Debian
[ 245.364] Current Operating System: Linux geode 4.5.0-1-686 #1 SMP Debian 4.5.1-1 (2016-04-14) i586
[ 245.364] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.5.0-1-686 root=UUID=97b2628b-28a5-49f2-85f7-495728b3bef8 ro panic=15 pnpbios=off quiet splash cs5535audio.ac97_quirk=1
[ 245.366] Build Date: 05 April 2016 07:01:49AM
[ 245.366] xorg-server 2:1.18.3-1 (http://www.debian.org/support)
[ 245.366] Current version of pixman: 0.33.6
[ 245.366] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 245.367] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 245.367] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Apr 21 13:17:46 2016
[ 245.372] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 245.379] (==) No Layout section. Using the first Screen section.
[ 245.380] (==) No screen section available. Using defaults.
[ 245.380] (**) |-->Screen "Default Screen Section" (0)
[ 245.380] (**) | |-->Monitor "<default monitor>"
[ 245.383] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 245.383] (==) Automatically adding devices
[ 245.383] (==) Automatically enabling devices
[ 245.383] (==) Automatically adding GPU devices
[ 245.383] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 245.383] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 245.383] Entry deleted from font path.
[ 245.383] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 245.383] Entry deleted from font path.
[ 245.393] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 245.393] Entry deleted from font path.
[ 245.393] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
[ 245.393] Entry deleted from font path.
[ 245.393] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 245.393] Entry deleted from font path.
[ 245.393] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 245.393] Entry deleted from font path.
[ 245.393] (==) FontPath set to:
/usr/share/fonts/X11/misc,
built-ins
[ 245.394] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 245.394] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 245.394] (II) Loader magic: 0x80279700
[ 245.394] (II) Module ABI versions:
[ 245.394] X.Org ANSI C Emulation: 0.4
[ 245.394] X.Org Video Driver: 20.0
[ 245.394] X.Org XInput driver : 22.1
[ 245.394] X.Org Server Extension : 9.0
[ 245.410] (++) using VT number 7
[ 245.451] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c38
[ 245.463] (--) PCI:*(0:0:1:1) 1022:2081:1509:801b rev 0, Mem @ 0xd0000000/268435456, 0xefff0000/16384, 0xeffec000/16384, 0xeffe8000/16384, 0xefff8000/16384
[ 245.465] (II) LoadModule: "glx"
[ 245.469] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 245.482] (II) Module glx: vendor="X.Org Foundation"
[ 245.482] compiled for 1.18.3, module version = 1.0.0
[ 245.484] ABI class: X.Org Server Extension, version 9.0
[ 245.485] (==) AIGLX enabled
[ 245.487] (==) Matched geode as autoconfigured driver 0
[ 245.488] (==) Matched modesetting as autoconfigured driver 1
[ 245.489] (==) Matched fbdev as autoconfigured driver 2
[ 245.489] (==) Matched vesa as autoconfigured driver 3
[ 245.489] (==) Assigned the driver to the xf86ConfigLayout
[ 245.489] (II) LoadModule: "geode"
[ 245.490] (II) Loading /usr/lib/xorg/modules/drivers/geode_drv.so
[ 245.491] (II) Module geode: vendor="X.Org Foundation"
[ 245.491] compiled for 1.18.0, module version = 2.11.18
[ 245.491] Module class: X.Org Video Driver
[ 245.491] ABI class: X.Org Video Driver, version 20.0
[ 245.491] (II) LoadModule: "modesetting"
[ 245.501] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 245.504] (II) Module modesetting: vendor="X.Org Foundation"
[ 245.504] compiled for 1.18.3, module version = 1.18.3
[ 245.506] Module class: X.Org Video Driver
[ 245.506] ABI class: X.Org Video Driver, version 20.0
[ 245.506] (II) LoadModule: "fbdev"
[ 245.507] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 245.507] (II) Module fbdev: vendor="X.Org Foundation"
[ 245.507] compiled for 1.18.0, module version = 0.4.4
[ 245.512] Module class: X.Org Video Driver
[ 245.512] ABI class: X.Org Video Driver, version 20.0
[ 245.512] (II) LoadModule: "vesa"
[ 245.514] (WW) Warning, couldn't open module vesa
[ 245.514] (II) UnloadModule: "vesa"
[ 245.514] (II) Unloading vesa
[ 245.514] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 245.514] (II) GEODE: Driver for AMD Geode Chipsets: Geode LX, Geode GX
[ 245.514] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 245.514] (II) FBDEV: driver for framebuffer: fbdev
[ 245.523] AmdPciProbe: Probing for supported devices!
[ 245.525] (WW) Falling back to old probe method for modesetting
[ 245.525] (EE) open /dev/dri/card0: No such file or directory
[ 245.525] (WW) Falling back to old probe method for fbdev
[ 245.525] (II) Loading sub module "fbdevhw"
[ 245.525] (II) LoadModule: "fbdevhw"
[ 245.526] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 245.526] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 245.527] compiled for 1.18.3, module version = 0.0.2
[ 245.527] ABI class: X.Org Video Driver, version 20.0
[ 245.527] (II) Loading sub module "vgahw"
[ 245.527] (II) LoadModule: "vgahw"
[ 245.533] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 245.535] (II) Module vgahw: vendor="X.Org Foundation"
[ 245.535] compiled for 1.18.3, module version = 0.1.0
[ 245.535] ABI class: X.Org Video Driver, version 20.0
[ 245.539] (II) GEODE(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 16/16
[ 245.540] (==) GEODE(0): Depth 16, (==) framebuffer bpp 16
[ 245.540] (==) GEODE(0): RGB weight 565
[ 245.540] (==) GEODE(0): Default visual is TrueColor
[ 245.540] (==) GEODE(0): Using gamma correction (1.0, 1.0, 1.0)
[ 245.540] (==) GEODE(0): No DCON is present
[ 245.541] (II) GEODE(0): LX output options:
[ 245.541] (II) GEODE(0): CRT: YES
[ 245.541] (II) GEODE(0): PANEL: NO
[ 245.541] (II) GEODE(0): DCON: NO
[ 245.541] (II) GEODE(0): VGA: YES
[ 245.541] (II) Loading sub module "int10"
[ 245.541] (II) LoadModule: "int10"
[ 245.541] (II) Loading /usr/lib/xorg/modules/libint10.so
[ 245.542] (II) Module int10: vendor="X.Org Foundation"
[ 245.542] compiled for 1.18.3, module version = 1.0.0
[ 245.542] ABI class: X.Org Video Driver, version 20.0
[ 245.563] (II) GEODE(0): Primary V_BIOS segment is: 0xc000
[ 245.565] (II) GEODE(0): Output default has no monitor section
[ 245.567] (II) GEODE(0): I2C bus "CS5536 DDC" initialized.
[ 245.567] (II) GEODE(0): I2C device "CS5536 DDC:ddc2" registered at address 0xA0.
[ 245.627] (II) GEODE(0): EDID for output default
[ 245.628] (II) GEODE(0): Manufacturer: VSC Model: 4b1b Serial#: 16843009
[ 245.629] (II) GEODE(0): Year: 2004 Week: 48
[ 245.630] (II) GEODE(0): EDID Version: 1.3
[ 245.630] (II) GEODE(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 245.631] (II) GEODE(0): Sync: Separate Composite SyncOnGreen
[ 245.633] (II) GEODE(0): Max Image Size [cm]: horiz.: 34 vert.: 27
[ 245.634] (II) GEODE(0): Gamma: 2.20
[ 245.634] (II) GEODE(0): DPMS capabilities: Off; RGB/Color Display
[ 245.634] (II) GEODE(0): First detailed timing is preferred mode
[ 245.634] (II) GEODE(0): redX: 0.640 redY: 0.340 greenX: 0.290 greenY: 0.610
[ 245.635] (II) GEODE(0): blueX: 0.140 blueY: 0.070 whiteX: 0.310 whiteY: 0.330
[ 245.635] (II) GEODE(0): Supported established timings:
[ 245.635] (II) GEODE(0): 720x400@70Hz
[ 245.635] (II) GEODE(0): 640x480@60Hz
[ 245.635] (II) GEODE(0): 640x480@67Hz
[ 245.635] (II) GEODE(0): 640x480@72Hz
[ 245.635] (II) GEODE(0): 640x480@75Hz
[ 245.635] (II) GEODE(0): 800x600@56Hz
[ 245.635] (II) GEODE(0): 800x600@60Hz
[ 245.635] (II) GEODE(0): 800x600@72Hz
[ 245.635] (II) GEODE(0): 800x600@75Hz
[ 245.635] (II) GEODE(0): 832x624@75Hz
[ 245.635] (II) GEODE(0): 1024x768@60Hz
[ 245.641] (II) GEODE(0): 1024x768@70Hz
[ 245.641] (II) GEODE(0): 1024x768@75Hz
[ 245.641] (II) GEODE(0): 1280x1024@75Hz
[ 245.641] (II) GEODE(0): 1152x864@75Hz
[ 245.641] (II) GEODE(0): Manufacturer's mask: 0
[ 245.641] (II) GEODE(0): Supported standard timings:
[ 245.641] (II) GEODE(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 245.642] (II) GEODE(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 245.642] (II) GEODE(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881
[ 245.642] (II) GEODE(0): #3: hsize: 800 vsize 600 refresh: 85 vid: 22853
[ 245.642] (II) GEODE(0): #4: hsize: 640 vsize 480 refresh: 85 vid: 22833
[ 245.642] (II) GEODE(0): Supported detailed timing:
[ 245.642] (II) GEODE(0): clock: 108.0 MHz Image Size: 338 x 270 mm
[ 245.642] (II) GEODE(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 245.642] (II) GEODE(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 245.642] (II) GEODE(0): Serial No: PJJ044800057
[ 245.642] (II) GEODE(0): Ranges: V min: 50 V max: 85 Hz, H min: 30 H max: 82 kHz, PixClock max 145 MHz
[ 245.642] (II) GEODE(0): Monitor name: VP171s-2
[ 245.642] (II) GEODE(0): EDID (in hex):
[ 245.643] (II) GEODE(0): 00ffffffffffff005a631b4b01010101
[ 245.643] (II) GEODE(0): 300e01030e221b782ac5c6a3574a9c23
[ 245.643] (II) GEODE(0): 124f54bfef808180714f615945593159
[ 245.643] (II) GEODE(0): 010101010101302a009851002a403070
[ 245.643] (II) GEODE(0): 1300520e1100001e000000ff00504a4a
[ 245.643] (II) GEODE(0): 3034343830303035370a000000fd0032
[ 245.643] (II) GEODE(0): 551e520e000a202020202020000000fc
[ 245.643] (II) GEODE(0): 005650313731732d320a20202020008b
[ 245.643] (II) GEODE(0): EDID vendor "VSC", prod id 19227
[ 245.650] (II) GEODE(0): Printing probed modes for output default
[ 245.650] (II) GEODE(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 245.650] (II) GEODE(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 245.650] (II) GEODE(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 245.650] (II) GEODE(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz e)
[ 245.650] (II) GEODE(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 245.650] (II) GEODE(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 245.650] (II) GEODE(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 245.650] (II) GEODE(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 245.651] (II) GEODE(0): Modeline "800x600"x85.1 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz e)
[ 245.651] (II) GEODE(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 245.651] (II) GEODE(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 245.651] (II) GEODE(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 245.651] (II) GEODE(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 245.651] (II) GEODE(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz e)
[ 245.651] (II) GEODE(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 245.651] (II) GEODE(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 245.657] (II) GEODE(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 245.657] (II) GEODE(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 245.658] (II) GEODE(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 245.658] (II) GEODE(0): Output default connected
[ 245.658] (II) GEODE(0): Using exact sizes for initial modes
[ 245.658] (II) GEODE(0): Output default using initial mode 1280x1024 +0+0
[ 245.658] (II) GEODE(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 245.658] (--) GEODE(0): Virtual size is 1280x1280 (pitch 0)
[ 245.658] (**) GEODE(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[ 245.658] (II) GEODE(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 245.658] (**) GEODE(0): Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
[ 245.659] (II) GEODE(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 245.659] (**) GEODE(0): Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
[ 245.659] (II) GEODE(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 245.659] (**) GEODE(0): Driver mode "1024x768": 94.5 MHz (scaled from 0.0 MHz), 68.7 kHz, 85.0 Hz
[ 245.659] (II) GEODE(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz e)
[ 245.659] (**) GEODE(0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
[ 245.659] (II) GEODE(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 245.659] (**) GEODE(0): Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
[ 245.659] (II) GEODE(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 245.664] (**) GEODE(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 245.665] (II) GEODE(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 245.665] (**) GEODE(0): Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
[ 245.665] (II) GEODE(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 245.665] (**) GEODE(0): Driver mode "800x600": 56.2 MHz (scaled from 0.0 MHz), 53.7 kHz, 85.1 Hz
[ 245.665] (II) GEODE(0): Modeline "800x600"x85.1 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz e)
[ 245.665] (**) GEODE(0): Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
[ 245.665] (II) GEODE(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 245.666] (**) GEODE(0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[ 245.666] (II) GEODE(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 245.666] (**) GEODE(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 245.666] (II) GEODE(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 245.666] (**) GEODE(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[ 245.666] (II) GEODE(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 245.666] (**) GEODE(0): Driver mode "640x480": 36.0 MHz (scaled from 0.0 MHz), 43.3 kHz, 85.0 Hz
[ 245.666] (II) GEODE(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz e)
[ 245.666] (**) GEODE(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[ 245.667] (II) GEODE(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 245.667] (**) GEODE(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
[ 245.667] (II) GEODE(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 245.667] (**) GEODE(0): Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz
[ 245.667] (II) GEODE(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 245.667] (**) GEODE(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
[ 245.667] (II) GEODE(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 245.667] (**) GEODE(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[ 245.667] (II) GEODE(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 245.667] (==) GEODE(0): DPI set to (96, 96)
[ 245.674] (II) Loading sub module "fb"
[ 245.674] (II) LoadModule: "fb"
[ 245.675] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 245.680] (II) Module fb: vendor="X.Org Foundation"
[ 245.681] compiled for 1.18.3, module version = 1.0.0
[ 245.681] ABI class: X.Org ANSI C Emulation, version 0.4
[ 245.681] (II) Loading sub module "exa"
[ 245.681] (II) LoadModule: "exa"
[ 245.682] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 245.682] (II) Module exa: vendor="X.Org Foundation"
[ 245.683] compiled for 1.18.3, module version = 2.6.0
[ 245.683] ABI class: X.Org Video Driver, version 20.0
[ 245.683] (II) UnloadModule: "modesetting"
[ 245.683] (II) Unloading modesetting
[ 245.683] (II) UnloadModule: "fbdev"
[ 245.683] (II) Unloading fbdev
[ 245.689] (II) UnloadSubModule: "fbdevhw"
[ 245.689] (II) Unloading fbdevhw
[ 245.690] (II) GEODE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
[ 245.699] (II) GEODE(0): Geode LX video memory 7e00000 bytes at 0xaea86000
[ 245.707] (II) GEODE(0): LX video memory:
[ 245.707] (II) GEODE(0): Display: 0x500000 bytes
[ 245.709] (II) GEODE(0): Compression: 0xaa000 bytes
[ 245.709] (II) GEODE(0): Cursor: 0x3000 bytes
[ 245.709] (II) GEODE(0): ExaBfrSz: 0x40000 bytes
[ 245.709] (II) GEODE(0): EXA: 0x7713000 bytes
[ 245.709] (II) GEODE(0): FREE: 0x0 bytes
[ 245.815] (II) EXA(0): Offscreen pixmap area of 124858368 bytes
[ 245.816] (II) EXA(0): Driver registered support for the following operations:
[ 245.817] (II) Solid
[ 245.818] (II) Copy
[ 245.819] (II) Composite (RENDER acceleration)
[ 245.821] (==) GEODE(0): Backing store enabled
[ 245.822] (==) GEODE(0): DPMS enabled
[ 245.823] (II) GEODE(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 245.825] (--) RandR disabled
[ 245.898] (II) SELinux: Disabled on system
[ 245.909] (II) AIGLX: Screen 0 is not DRI2 capable
[ 245.910] (EE) AIGLX: reverting to software rendering
[ 246.093] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 246.102] (II) AIGLX: Loaded and initialized swrast
[ 246.103] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 246.108] (II) GEODE(0): Setting screen physical size to 338 x 270
[ 246.214] (EE) XKB: Could not invoke xkbcomp
[ 246.216] (EE) XKB: Couldn't compile keymap
[ 246.217] (EE) XKB: Failed to load keymap. Loading default keymap instead.
[ 246.246] (EE) XKB: Could not invoke xkbcomp
[ 246.247] (EE) XKB: Couldn't compile keymap
[ 246.248] XKB: Failed to compile keymap
[ 246.249] Keyboard initialization failed. This could be a missing or incorrect setup of xkeyboard-config.
[ 246.249] (EE)
Fatal server error:
[ 246.251] (EE) Failed to activate core devices.(EE)
[ 246.253] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 246.253] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 246.253] (EE)
[ 246.296] (EE) Server terminated with error (1). Closing log file.
[ 99.983] (--) Log file renamed from "/var/log/Xorg.pid-798.log" to "/var/log/Xorg.0.log"
[ 100.012]
X.Org X Server 1.18.3
Release Date: 2016-04-04
[ 100.016] X Protocol Version 11, Revision 0
[ 100.016] Build Operating System: Linux 3.16.0-4-amd64 i686 Debian
[ 100.016] Current Operating System: Linux geode 3.16.0-4-586 #1 Debian 3.16.7-ckt20-1+deb8u4 (2016-02-29) i586
[ 100.017] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-586 root=UUID=97b2628b-28a5-49f2-85f7-495728b3bef8 ro panic=15 pnpbios=off quiet splash cs5535audio.ac97_quirk=1
[ 100.017] Build Date: 05 April 2016 07:01:49AM
[ 100.017] xorg-server 2:1.18.3-1 (http://www.debian.org/support)
[ 100.017] Current version of pixman: 0.33.6
[ 100.017] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 100.017] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 100.018] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Apr 21 12:57:54 2016
[ 100.064] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 100.102] (==) No Layout section. Using the first Screen section.
[ 100.102] (==) No screen section available. Using defaults.
[ 100.102] (**) |-->Screen "Default Screen Section" (0)
[ 100.102] (**) | |-->Monitor "<default monitor>"
[ 100.136] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 100.136] (==) Automatically adding devices
[ 100.136] (==) Automatically enabling devices
[ 100.136] (==) Automatically adding GPU devices
[ 100.136] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 100.198] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 100.199] Entry deleted from font path.
[ 100.199] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 100.199] Entry deleted from font path.
[ 100.199] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 100.199] Entry deleted from font path.
[ 100.199] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
[ 100.199] Entry deleted from font path.
[ 100.199] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 100.199] Entry deleted from font path.
[ 100.199] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 100.199] Entry deleted from font path.
[ 100.199] (==) FontPath set to:
/usr/share/fonts/X11/misc,
built-ins
[ 100.204] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 100.204] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 100.205] (II) Loader magic: 0xb7754700
[ 100.205] (II) Module ABI versions:
[ 100.205] X.Org ANSI C Emulation: 0.4
[ 100.205] X.Org Video Driver: 20.0
[ 100.205] X.Org XInput driver : 22.1
[ 100.205] X.Org Server Extension : 9.0
[ 100.219] (++) using VT number 7
[ 100.280] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 100.308] (--) PCI:*(0:0:1:1) 1022:2081:1509:801b rev 0, Mem @ 0xd0000000/268435456, 0xefff0000/16384, 0xeffec000/16384, 0xeffe8000/16384, 0xefff8000/16384
[ 100.335] (II) LoadModule: "glx"
[ 100.385] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 100.651] (II) Module glx: vendor="X.Org Foundation"
[ 100.651] compiled for 1.18.3, module version = 1.0.0
[ 100.651] ABI class: X.Org Server Extension, version 9.0
[ 100.651] (==) AIGLX enabled
[ 100.651] (==) Matched geode as autoconfigured driver 0
[ 100.651] (==) Matched modesetting as autoconfigured driver 1
[ 100.651] (==) Matched fbdev as autoconfigured driver 2
[ 100.651] (==) Matched vesa as autoconfigured driver 3
[ 100.652] (==) Assigned the driver to the xf86ConfigLayout
[ 100.652] (II) LoadModule: "geode"
[ 100.677] (II) Loading /usr/lib/xorg/modules/drivers/geode_drv.so
[ 100.723] (II) Module geode: vendor="X.Org Foundation"
[ 100.723] compiled for 1.18.0, module version = 2.11.18
[ 100.723] Module class: X.Org Video Driver
[ 100.723] ABI class: X.Org Video Driver, version 20.0
[ 100.723] (II) LoadModule: "modesetting"
[ 100.729] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 100.745] (II) Module modesetting: vendor="X.Org Foundation"
[ 100.745] compiled for 1.18.3, module version = 1.18.3
[ 100.745] Module class: X.Org Video Driver
[ 100.745] ABI class: X.Org Video Driver, version 20.0
[ 100.745] (II) LoadModule: "fbdev"
[ 100.746] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 100.760] (II) Module fbdev: vendor="X.Org Foundation"
[ 100.760] compiled for 1.18.0, module version = 0.4.4
[ 100.760] Module class: X.Org Video Driver
[ 100.760] ABI class: X.Org Video Driver, version 20.0
[ 100.760] (II) LoadModule: "vesa"
[ 100.762] (WW) Warning, couldn't open module vesa
[ 100.762] (II) UnloadModule: "vesa"
[ 100.762] (II) Unloading vesa
[ 100.762] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 100.762] (II) GEODE: Driver for AMD Geode Chipsets: Geode LX, Geode GX
[ 100.762] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 100.762] (II) FBDEV: driver for framebuffer: fbdev
[ 100.768] AmdPciProbe: Probing for supported devices!
[ 100.768] (WW) Falling back to old probe method for modesetting
[ 100.768] (EE) open /dev/dri/card0: No such file or directory
[ 100.768] (WW) Falling back to old probe method for fbdev
[ 100.768] (II) Loading sub module "fbdevhw"
[ 100.768] (II) LoadModule: "fbdevhw"
[ 100.769] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 100.788] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 100.788] compiled for 1.18.3, module version = 0.0.2
[ 100.788] ABI class: X.Org Video Driver, version 20.0
[ 100.788] (II) Loading sub module "vgahw"
[ 100.789] (II) LoadModule: "vgahw"
[ 100.789] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 100.791] (II) Module vgahw: vendor="X.Org Foundation"
[ 100.791] compiled for 1.18.3, module version = 0.1.0
[ 100.791] ABI class: X.Org Video Driver, version 20.0
[ 100.792] (II) GEODE(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 16/16
[ 100.792] (==) GEODE(0): Depth 16, (==) framebuffer bpp 16
[ 100.792] (==) GEODE(0): RGB weight 565
[ 100.792] (==) GEODE(0): Default visual is TrueColor
[ 100.793] (==) GEODE(0): Using gamma correction (1.0, 1.0, 1.0)
[ 100.793] (==) GEODE(0): No DCON is present
[ 100.793] (II) GEODE(0): LX output options:
[ 100.793] (II) GEODE(0): CRT: YES
[ 100.793] (II) GEODE(0): PANEL: NO
[ 100.793] (II) GEODE(0): DCON: NO
[ 100.793] (II) GEODE(0): VGA: YES
[ 100.793] (II) Loading sub module "int10"
[ 100.793] (II) LoadModule: "int10"
[ 100.794] (II) Loading /usr/lib/xorg/modules/libint10.so
[ 100.821] (II) Module int10: vendor="X.Org Foundation"
[ 100.821] compiled for 1.18.3, module version = 1.0.0
[ 100.822] ABI class: X.Org Video Driver, version 20.0
[ 100.835] (II) GEODE(0): Primary V_BIOS segment is: 0xc000
[ 100.842] (II) GEODE(0): Output default has no monitor section
[ 100.844] (II) GEODE(0): I2C bus "CS5536 DDC" initialized.
[ 100.845] (II) GEODE(0): I2C device "CS5536 DDC:ddc2" registered at address 0xA0.
[ 101.026] (II) GEODE(0): EDID for output default
[ 101.028] (II) GEODE(0): Manufacturer: VSC Model: 4b1b Serial#: 16843009
[ 101.028] (II) GEODE(0): Year: 2004 Week: 48
[ 101.028] (II) GEODE(0): EDID Version: 1.3
[ 101.028] (II) GEODE(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 101.029] (II) GEODE(0): Sync: Separate Composite SyncOnGreen
[ 101.029] (II) GEODE(0): Max Image Size [cm]: horiz.: 34 vert.: 27
[ 101.029] (II) GEODE(0): Gamma: 2.20
[ 101.029] (II) GEODE(0): DPMS capabilities: Off; RGB/Color Display
[ 101.029] (II) GEODE(0): First detailed timing is preferred mode
[ 101.029] (II) GEODE(0): redX: 0.640 redY: 0.340 greenX: 0.290 greenY: 0.610
[ 101.029] (II) GEODE(0): blueX: 0.140 blueY: 0.070 whiteX: 0.310 whiteY: 0.330
[ 101.030] (II) GEODE(0): Supported established timings:
[ 101.030] (II) GEODE(0): 720x400@70Hz
[ 101.030] (II) GEODE(0): 640x480@60Hz
[ 101.030] (II) GEODE(0): 640x480@67Hz
[ 101.030] (II) GEODE(0): 640x480@72Hz
[ 101.030] (II) GEODE(0): 640x480@75Hz
[ 101.030] (II) GEODE(0): 800x600@56Hz
[ 101.030] (II) GEODE(0): 800x600@60Hz
[ 101.030] (II) GEODE(0): 800x600@72Hz
[ 101.030] (II) GEODE(0): 800x600@75Hz
[ 101.030] (II) GEODE(0): 832x624@75Hz
[ 101.030] (II) GEODE(0): 1024x768@60Hz
[ 101.030] (II) GEODE(0): 1024x768@70Hz
[ 101.030] (II) GEODE(0): 1024x768@75Hz
[ 101.030] (II) GEODE(0): 1280x1024@75Hz
[ 101.031] (II) GEODE(0): 1152x864@75Hz
[ 101.031] (II) GEODE(0): Manufacturer's mask: 0
[ 101.031] (II) GEODE(0): Supported standard timings:
[ 101.031] (II) GEODE(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 101.031] (II) GEODE(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 101.031] (II) GEODE(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881
[ 101.031] (II) GEODE(0): #3: hsize: 800 vsize 600 refresh: 85 vid: 22853
[ 101.031] (II) GEODE(0): #4: hsize: 640 vsize 480 refresh: 85 vid: 22833
[ 101.031] (II) GEODE(0): Supported detailed timing:
[ 101.031] (II) GEODE(0): clock: 108.0 MHz Image Size: 338 x 270 mm
[ 101.031] (II) GEODE(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 101.031] (II) GEODE(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 101.032] (II) GEODE(0): Serial No: PJJ044800057
[ 101.042] (II) GEODE(0): Ranges: V min: 50 V max: 85 Hz, H min: 30 H max: 82 kHz, PixClock max 145 MHz
[ 101.042] (II) GEODE(0): Monitor name: VP171s-2
[ 101.042] (II) GEODE(0): EDID (in hex):
[ 101.042] (II) GEODE(0): 00ffffffffffff005a631b4b01010101
[ 101.042] (II) GEODE(0): 300e01030e221b782ac5c6a3574a9c23
[ 101.042] (II) GEODE(0): 124f54bfef808180714f615945593159
[ 101.043] (II) GEODE(0): 010101010101302a009851002a403070
[ 101.043] (II) GEODE(0): 1300520e1100001e000000ff00504a4a
[ 101.043] (II) GEODE(0): 3034343830303035370a000000fd0032
[ 101.043] (II) GEODE(0): 551e520e000a202020202020000000fc
[ 101.043] (II) GEODE(0): 005650313731732d320a20202020008b
[ 101.043] (II) GEODE(0): EDID vendor "VSC", prod id 19227
[ 101.043] (II) GEODE(0): Printing probed modes for output default
[ 101.044] (II) GEODE(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 101.044] (II) GEODE(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 101.044] (II) GEODE(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 101.044] (II) GEODE(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz e)
[ 101.044] (II) GEODE(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 101.044] (II) GEODE(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 101.044] (II) GEODE(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 101.044] (II) GEODE(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 101.045] (II) GEODE(0): Modeline "800x600"x85.1 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz e)
[ 101.045] (II) GEODE(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 101.045] (II) GEODE(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 101.045] (II) GEODE(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 101.045] (II) GEODE(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 101.045] (II) GEODE(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz e)
[ 101.045] (II) GEODE(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 101.045] (II) GEODE(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 101.046] (II) GEODE(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 101.046] (II) GEODE(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 101.046] (II) GEODE(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 101.046] (II) GEODE(0): Output default connected
[ 101.046] (II) GEODE(0): Using exact sizes for initial modes
[ 101.046] (II) GEODE(0): Output default using initial mode 1280x1024 +0+0
[ 101.046] (II) GEODE(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 101.046] (--) GEODE(0): Virtual size is 1280x1280 (pitch 0)
[ 101.046] (**) GEODE(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[ 101.046] (II) GEODE(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 101.047] (**) GEODE(0): Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
[ 101.047] (II) GEODE(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 101.047] (**) GEODE(0): Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
[ 101.047] (II) GEODE(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 101.047] (**) GEODE(0): Driver mode "1024x768": 94.5 MHz (scaled from 0.0 MHz), 68.7 kHz, 85.0 Hz
[ 101.047] (II) GEODE(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz e)
[ 101.047] (**) GEODE(0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
[ 101.047] (II) GEODE(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 101.047] (**) GEODE(0): Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
[ 101.060] (II) GEODE(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 101.061] (**) GEODE(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 101.061] (II) GEODE(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 101.061] (**) GEODE(0): Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
[ 101.061] (II) GEODE(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 101.061] (**) GEODE(0): Driver mode "800x600": 56.2 MHz (scaled from 0.0 MHz), 53.7 kHz, 85.1 Hz
[ 101.061] (II) GEODE(0): Modeline "800x600"x85.1 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz e)
[ 101.061] (**) GEODE(0): Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
[ 101.061] (II) GEODE(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 101.061] (**) GEODE(0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[ 101.062] (II) GEODE(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 101.062] (**) GEODE(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 101.062] (II) GEODE(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 101.062] (**) GEODE(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[ 101.062] (II) GEODE(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 101.062] (**) GEODE(0): Driver mode "640x480": 36.0 MHz (scaled from 0.0 MHz), 43.3 kHz, 85.0 Hz
[ 101.062] (II) GEODE(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz e)
[ 101.062] (**) GEODE(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[ 101.062] (II) GEODE(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 101.063] (**) GEODE(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
[ 101.063] (II) GEODE(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 101.063] (**) GEODE(0): Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz
[ 101.063] (II) GEODE(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 101.063] (**) GEODE(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
[ 101.063] (II) GEODE(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 101.063] (**) GEODE(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[ 101.063] (II) GEODE(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 101.063] (==) GEODE(0): DPI set to (96, 96)
[ 101.063] (II) Loading sub module "fb"
[ 101.070] (II) LoadModule: "fb"
[ 101.071] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 101.076] (II) Module fb: vendor="X.Org Foundation"
[ 101.078] compiled for 1.18.3, module version = 1.0.0
[ 101.078] ABI class: X.Org ANSI C Emulation, version 0.4
[ 101.079] (II) Loading sub module "exa"
[ 101.079] (II) LoadModule: "exa"
[ 101.079] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 101.088] (II) Module exa: vendor="X.Org Foundation"
[ 101.088] compiled for 1.18.3, module version = 2.6.0
[ 101.088] ABI class: X.Org Video Driver, version 20.0
[ 101.088] (II) UnloadModule: "modesetting"
[ 101.088] (II) Unloading modesetting
[ 101.088] (II) UnloadModule: "fbdev"
[ 101.089] (II) Unloading fbdev
[ 101.089] (II) UnloadSubModule: "fbdevhw"
[ 101.089] (II) Unloading fbdevhw
[ 101.089] (II) GEODE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
[ 101.106] (II) GEODE(0): Geode LX video memory 7e00000 bytes at 0xae84d000
[ 101.108] (II) GEODE(0): LX video memory:
[ 101.108] (II) GEODE(0): Display: 0x500000 bytes
[ 101.108] (II) GEODE(0): Compression: 0xaa000 bytes
[ 101.108] (II) GEODE(0): Cursor: 0x3000 bytes
[ 101.108] (II) GEODE(0): ExaBfrSz: 0x40000 bytes
[ 101.109] (II) GEODE(0): EXA: 0x7713000 bytes
[ 101.109] (II) GEODE(0): FREE: 0x0 bytes
[ 101.489] (II) EXA(0): Offscreen pixmap area of 124858368 bytes
[ 101.489] (II) EXA(0): Driver registered support for the following operations:
[ 101.489] (II) Solid
[ 101.489] (II) Copy
[ 101.489] (II) Composite (RENDER acceleration)
[ 101.489] (==) GEODE(0): Backing store enabled
[ 101.505] (==) GEODE(0): DPMS enabled
[ 101.505] (II) GEODE(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 101.506] (--) RandR disabled
[ 101.749] (II) SELinux: Disabled on system
[ 101.775] (II) AIGLX: Screen 0 is not DRI2 capable
[ 101.788] (EE) AIGLX: reverting to software rendering
[ 103.757] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 103.775] (II) AIGLX: Loaded and initialized swrast
[ 103.778] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 103.789] (II) GEODE(0): Setting screen physical size to 338 x 270
[ 105.100] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 105.102] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 105.102] (II) LoadModule: "evdev"
[ 105.103] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 105.166] (II) Module evdev: vendor="X.Org Foundation"
[ 105.166] compiled for 1.18.0, module version = 2.10.1
[ 105.166] Module class: X.Org XInput Driver
[ 105.166] ABI class: X.Org XInput driver, version 22.1
[ 105.174] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 12 paused 0
[ 105.180] (II) Using input driver 'evdev' for 'Power Button'
[ 105.180] (**) Power Button: always reports core events
[ 105.180] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 105.181] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 105.181] (--) evdev: Power Button: Found keys
[ 105.181] (II) evdev: Power Button: Configuring as keyboard
[ 105.181] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 105.181] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 105.181] (**) Option "xkb_rules" "evdev"
[ 105.182] (**) Option "xkb_model" "pc105"
[ 105.182] (**) Option "xkb_layout" "fi"
[ 105.182] (**) Option "xkb_options" "lv3:ralt_switch,terminate:ctrl_alt_bksp"
[ 105.649] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 105.656] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 105.661] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 13 paused 0
[ 105.661] (II) Using input driver 'evdev' for 'Power Button'
[ 105.661] (**) Power Button: always reports core events
[ 105.661] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 105.662] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 105.662] (--) evdev: Power Button: Found keys
[ 105.662] (II) evdev: Power Button: Configuring as keyboard
[ 105.662] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 105.662] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 105.663] (**) Option "xkb_rules" "evdev"
[ 105.663] (**) Option "xkb_model" "pc105"
[ 105.663] (**) Option "xkb_layout" "fi"
[ 105.663] (**) Option "xkb_options" "lv3:ralt_switch,terminate:ctrl_alt_bksp"
[ 105.690] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 105.696] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 105.703] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 14 paused 0
[ 105.704] (II) Using input driver 'evdev' for 'Sleep Button'
[ 105.704] (**) Sleep Button: always reports core events
[ 105.704] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[ 105.704] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 105.704] (--) evdev: Sleep Button: Found keys
[ 105.705] (II) evdev: Sleep Button: Configuring as keyboard
[ 105.705] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[ 105.705] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 105.705] (**) Option "xkb_rules" "evdev"
[ 105.705] (**) Option "xkb_model" "pc105"
[ 105.705] (**) Option "xkb_layout" "fi"
[ 105.705] (**) Option "xkb_options" "lv3:ralt_switch,terminate:ctrl_alt_bksp"
[ 105.732] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event3)
[ 105.740] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 105.746] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 15 paused 0
[ 105.747] (II) Using input driver 'evdev' for 'Logitech USB-PS/2 Optical Mouse'
[ 105.747] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
[ 105.747] (**) evdev: Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event3"
[ 105.747] (--) evdev: Logitech USB-PS/2 Optical Mouse: Vendor 0x46d Product 0xc00e
[ 105.747] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found 3 mouse buttons
[ 105.747] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
[ 105.748] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found relative axes
[ 105.748] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
[ 105.748] (II) evdev: Logitech USB-PS/2 Optical Mouse: Configuring as mouse
[ 105.748] (II) evdev: Logitech USB-PS/2 Optical Mouse: Adding scrollwheel support
[ 105.748] (**) evdev: Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
[ 105.748] (**) evdev: Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 105.748] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:0f.4/usb2/2-3/2-3:1.0/0003:046D:C00E.0001/input/input3/event3"
[ 105.749] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE, id 9)
[ 105.749] (II) evdev: Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
[ 105.751] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
[ 105.751] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
[ 105.751] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
[ 105.751] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
[ 105.778] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
[ 105.783] (II) No input driver specified, ignoring this device.
[ 105.783] (II) This device may have been added with another device file.
[ 122.942] (II) GEODE(0): EDID vendor "VSC", prod id 19227
[ 122.944] (II) GEODE(0): Using EDID range info for horizontal sync
[ 122.944] (II) GEODE(0): Using EDID range info for vertical refresh
[ 122.944] (II) GEODE(0): Printing DDC gathered Modelines:
[ 122.945] (II) GEODE(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 122.945] (II) GEODE(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 122.945] (II) GEODE(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 122.945] (II) GEODE(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 122.945] (II) GEODE(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 122.945] (II) GEODE(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 122.945] (II) GEODE(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 122.945] (II) GEODE(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 122.945] (II) GEODE(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 122.946] (II) GEODE(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 122.946] (II) GEODE(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 122.946] (II) GEODE(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 122.946] (II) GEODE(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 122.946] (II) GEODE(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 122.946] (II) GEODE(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 122.946] (II) GEODE(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 122.946] (II) GEODE(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz e)
[ 122.947] (II) GEODE(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz e)
[ 122.947] (II) GEODE(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz e)
[ 122.947] (II) GEODE(0): EDID vendor "VSC", prod id 19227
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.0-4-586 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 Debian 3.16.7-ckt20-1+deb8u4 (2016-02-29)
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000037faffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000037fb0000-0x0000000037fb2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000037fb3000-0x0000000037fbffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000ffff0000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] SMBIOS 2.2 present.
[ 0.000000] DMI: First International Computer, Inc. ION603/ION603, BIOS 6.00 PG 11/08/2007
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x37fb0 max_arch_pfn = 0x100000
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37000000-0x373fffff]
[ 0.000000] [mem 0x37000000-0x373fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x30000000-0x36ffffff]
[ 0.000000] [mem 0x30000000-0x36ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff]
[ 0.000000] [mem 0x00100000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x2fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x37400000-0x377fdfff]
[ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
[ 0.000000] BRK [0x0171f000, 0x0171ffff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x350f6000-0x36872fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F5910 000014 (v00 AMDGX3)
[ 0.000000] ACPI: RSDT 0x0000000037FB3000 000028 (v01 AMDGX3 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 0x0000000037FB3080 000074 (v01 AMDGX3 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 16, using default 8 (20140424/tbfadt-704)
[ 0.000000] ACPI: DSDT 0x0000000037FB3100 001581 (v01 AMDGX3 AWRDACPI 00001017 MSFT 03000000)
[ 0.000000] ACPI: FACS 0x0000000037FB0000 000040
[ 0.000000] 7MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] BRK [0x01720000, 0x01720fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x377fdfff]
[ 0.000000] HighMem [mem 0x377fe000-0x37faffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0x37faffff]
[ 0.000000] On node 0 totalpages: 229197
[ 0.000000] free_area_init_node: node 0, pgdat c15f54c0, node_mem_map f70fe020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 223230 pages, LIFO batch:31
[ 0.000000] HighMem zone: 16 pages used for memmap
[ 0.000000] HighMem zone: 1970 pages, LIFO batch:0
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x9c10
[ 0.000000] No local APIC present or hardware disabled
[ 0.000000] APIC: disable apic facility
[ 0.000000] APIC: switched to apic NOOP
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0x37fc0000-0xfffeffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227421
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-586 root=UUID=97b2628b-28a5-49f2-85f7-495728b3bef8 ro panic=15 pnpbios=off quiet splash cs5535audio.ac97_quirk=1
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000377fe:00037fb0)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 877344K/916788K available (4257K kernel code, 506K rwdata, 1396K rodata, 672K init, 416K bss, 39444K reserved, 7880K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfffa2000 - 0xfffff000 ( 372 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc1607000 - 0xc16af000 ( 672 kB)
.data : 0xc1428a50 - 0xc1605940 (1907 kB)
.text : 0xc1000000 - 0xc1428a50 (4258 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=f6c06000 soft=f6c08000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 498.039 MHz processor
[ 0.008023] Calibrating delay loop (skipped), value calculated using timer frequency.. 996.07 BogoMIPS (lpj=1992156)
[ 0.008042] pid_max: default: 32768 minimum: 301
[ 0.008110] ACPI: Core revision 20140424
[ 0.019963] ACPI: All ACPI Tables successfully acquired
[ 0.019988] ACPI: setting ELCR to 0200 (from 0c20)
[ 0.020095] Security Framework initialized
[ 0.020141] AppArmor: AppArmor disabled by boot time parameter
[ 0.020152] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.020219] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.020237] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.021448] Initializing cgroup subsys memory
[ 0.021479] Initializing cgroup subsys devices
[ 0.021533] Initializing cgroup subsys freezer
[ 0.021558] Initializing cgroup subsys net_cls
[ 0.021596] Initializing cgroup subsys blkio
[ 0.021630] Initializing cgroup subsys perf_event
[ 0.021649] Initializing cgroup subsys net_prio
[ 0.021770] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
tlb_flushall_shift: -1
[ 0.021791] CPU: Geode(TM) Integrated Processor by AMD PCS (fam: 05, model: 0a, stepping: 02)
[ 0.030905] ftrace: allocating 19730 entries in 39 pages
[ 0.076367] Performance Events: no PMU driver, software events only.
[ 0.088698] NMI watchdog: disabled (cpu0): hardware events not enabled
[ 0.089114] devtmpfs: initialized
[ 0.090539] PM: Registering ACPI NVS region [mem 0x37fb0000-0x37fb2fff] (12288 bytes)
[ 0.101418] pinctrl core: initialized pinctrl subsystem
[ 0.101861] NET: Registered protocol family 16
[ 0.102854] EISA bus registered
[ 0.102878] cpuidle: using governor ladder
[ 0.102901] cpuidle: using governor menu
[ 0.103536] ACPI: bus type PCI registered
[ 0.103550] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.105511] PCI: PCI BIOS revision 2.10 entry at 0xfad30, last bus=0
[ 0.105523] PCI: Using configuration type 1 for base access
[ 0.112980] ACPI: Added _OSI(Module Device)
[ 0.112996] ACPI: Added _OSI(Processor Device)
[ 0.113009] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.113023] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.126938] ACPI: Interpreter enabled
[ 0.127033] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.127063] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
[ 0.127092] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
[ 0.127139] ACPI: (supports S0 S1 S5)
[ 0.127152] ACPI: Using PIC for interrupt routing
[ 0.127283] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.142694] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.142732] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[ 0.142780] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.143292] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.143314] acpi PNP0A03:00: host bridge window [io 0x0d00-0xac17] (ignored)
[ 0.143334] acpi PNP0A03:00: host bridge window [io 0xac20-0xffff] (ignored)
[ 0.143355] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.143376] acpi PNP0A03:00: host bridge window [mem 0x000c8000-0x000dffff] (ignored)
[ 0.143397] acpi PNP0A03:00: host bridge window [mem 0x40500000-0xfebfffff] (ignored)
[ 0.143411] PCI: root bus 00: using default resources
[ 0.143433] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.144335] PCI host bridge to bus 0000:00
[ 0.144358] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.144378] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.144399] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.144542] pci 0000:00:01.0: [1022:2080] type 00 class 0x060000
[ 0.144691] pci 0000:00:01.0: reg 0x10: [io 0xac1c-0xac1f]
[ 0.144805] pci 0000:00:01.0: reg 0x14: [io 0x9e00-0x9e07]
[ 0.146020] pci 0000:00:01.1: [1022:2081] type 00 class 0x030000
[ 0.146320] pci 0000:00:01.1: reg 0x10: [mem 0xd0000000-0xdfffffff]
[ 0.146535] pci 0000:00:01.1: reg 0x14: [mem 0xefff0000-0xefff3fff]
[ 0.146749] pci 0000:00:01.1: reg 0x18: [mem 0xeffec000-0xeffeffff]
[ 0.146963] pci 0000:00:01.1: reg 0x1c: [mem 0xeffe8000-0xeffebfff]
[ 0.147177] pci 0000:00:01.1: reg 0x20: [mem 0xefff8000-0xefffbfff]
[ 0.148330] pci 0000:00:01.2: [1022:2082] type 00 class 0x101000
[ 0.148589] pci 0000:00:01.2: reg 0x10: [mem 0xefff4000-0xefff7fff]
[ 0.150325] pci 0000:00:0d.0: [10ec:8139] type 00 class 0x020000
[ 0.150364] pci 0000:00:0d.0: reg 0x10: [io 0xfc00-0xfcff]
[ 0.150393] pci 0000:00:0d.0: reg 0x14: [mem 0xeffff000-0xeffff0ff]
[ 0.150485] pci 0000:00:0d.0: supports D1 D2
[ 0.150504] pci 0000:00:0d.0: PME# supported from D1 D2 D3hot D3cold
[ 0.150661] pci 0000:00:0d.0: System wakeup disabled by ACPI
[ 0.151179] pci 0000:00:0f.0: [1022:2090] type 00 class 0x060100
[ 0.151497] pci 0000:00:0f.0: reg 0x10: [io 0x6000-0x6007]
[ 0.151762] pci 0000:00:0f.0: reg 0x14: [io 0x6100-0x61ff]
[ 0.152020] pci 0000:00:0f.0: reg 0x18: [io 0x6200-0x623f]
[ 0.152284] pci 0000:00:0f.0: reg 0x1c: [io 0x0000-0x001f]
[ 0.152554] pci 0000:00:0f.0: reg 0x20: [io 0x9d00-0x9d7f]
[ 0.152835] pci 0000:00:0f.0: reg 0x24: [io 0x9c00-0x9c3f]
[ 0.153847] pci 0000:00:0f.2: [1022:209a] type 00 class 0x010180
[ 0.154811] pci 0000:00:0f.2: reg 0x20: [io 0xff00-0xff0f]
[ 0.155247] pci 0000:00:0f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.155266] pci 0000:00:0f.2: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.155286] pci 0000:00:0f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.155305] pci 0000:00:0f.2: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.156079] pci 0000:00:0f.3: [1022:2093] type 00 class 0x040100
[ 0.156354] pci 0000:00:0f.3: reg 0x10: [io 0xfe00-0xfe7f]
[ 0.158164] pci 0000:00:0f.4: [1022:2094] type 00 class 0x0c0310
[ 0.158570] pci 0000:00:0f.4: reg 0x10: [mem 0xefffe000-0xefffefff]
[ 0.160179] pci 0000:00:0f.4: PME# supported from D0 D3hot D3cold
[ 0.160471] pci 0000:00:0f.4: System wakeup disabled by ACPI
[ 0.161053] pci 0000:00:0f.5: [1022:2095] type 00 class 0x0c0320
[ 0.161414] pci 0000:00:0f.5: reg 0x10: [mem 0xefffd000-0xefffdfff]
[ 0.163006] pci 0000:00:0f.5: PME# supported from D0 D3hot D3cold
[ 0.163294] pci 0000:00:0f.5: System wakeup disabled by ACPI
[ 0.163777] pci_bus 0000:00: on NUMA node 0
[ 0.165002] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 0.165888] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 10 *11)
[ 0.166619] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 11) *0, disabled.
[ 0.167501] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 11) *0
[ 0.169517] ACPI: Enabled 2 GPEs in block 00 to 1F
[ 0.170470] vgaarb: setting as boot device: PCI:0000:00:01.1
[ 0.170488] vgaarb: device added: PCI:0000:00:01.1,decodes=io+mem,owns=io+mem,locks=none
[ 0.170505] vgaarb: loaded
[ 0.170518] vgaarb: bridge control possible 0000:00:01.1
[ 0.170996] PCI: Using ACPI for IRQ routing
[ 0.171010] PCI: pci_cache_line_size set to 32 bytes
[ 0.171455] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.171471] e820: reserve RAM buffer [mem 0x37fb0000-0x37ffffff]
[ 0.172732] Switched to clocksource pit
[ 0.214245] pnp: PnP ACPI init
[ 0.214367] ACPI: bus type PNP registered
[ 0.215176] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.215201] system 00:00: [mem 0x37fb0000-0x37fbffff] could not be reserved
[ 0.215225] system 00:00: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.215247] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.215327] system 00:00: [mem 0x00100000-0x37faffff] could not be reserved
[ 0.215350] system 00:00: [mem 0x40400000-0x4043ffff] has been reserved
[ 0.215373] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.215399] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.216720] pnp 00:01: disabling [io 0x0010-0x001f] because it overlaps 0000:00:0f.0 BAR 3 [io 0x0000-0x001f]
[ 0.217030] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.217053] system 00:01: [io 0x0480-0x048f] has been reserved
[ 0.217077] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.217379] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.217433] pnp: PnP ACPI: found 3 devices
[ 0.217444] ACPI: bus type PNP unregistered
[ 0.217472] PnPBIOS: Disabled
[ 0.267872] Switched to clocksource acpi_pm
[ 0.267953] pci 0000:00:0f.0: BAR 3: assigned [io 0x1000-0x101f]
[ 0.268046] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.268067] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.268193] NET: Registered protocol family 2
[ 0.269857] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.270025] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.270173] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.270355] TCP: reno registered
[ 0.270372] UDP hash table entries: 512 (order: 1, 8192 bytes)
[ 0.270414] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
[ 0.270670] NET: Registered protocol family 1
[ 0.270830] pci 0000:00:01.1: Video device with shadowed ROM
[ 0.273379] ACPI: PCI Interrupt Link [LNKD] BIOS reported IRQ 0, using IRQ 11
[ 0.273394] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 0.273407] PCI: setting IRQ 11 as level-triggered
[ 0.344906] PCI: CLS 32 bytes, default 32
[ 0.345212] Unpacking initramfs...
[ 4.619178] Freeing initrd memory: 24052K (f50f6000 - f6873000)
[ 4.619898] microcode: AMD CPU family 0x5 not supported
[ 4.620556] simple-framebuffer simple-framebuffer.0: framebuffer at 0xd0000000, 0x1d5000 bytes, mapped to 0xf8080000
[ 4.620581] simple-framebuffer simple-framebuffer.0: format=x8r8g8b8, mode=800x600x32, linelength=3200
[ 4.648098] Console: switching to colour frame buffer device 100x37
[ 4.674886] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
[ 4.676661] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 4.676793] audit: initializing netlink subsys (disabled)
[ 4.676875] audit: type=2000 audit(1461232578.675:1): initialized
[ 4.678623] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 4.678742] zbud: loaded
[ 4.680883] VFS: Disk quotas dquot_6.5.2
[ 4.680944] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 4.681225] msgmni has been set to 1745
[ 4.683969] alg: No test for stdrng (krng)
[ 4.684194] bounce: pool size: 64 pages
[ 4.684273] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 4.684514] io scheduler noop registered
[ 4.684536] io scheduler deadline registered
[ 4.684773] io scheduler cfq registered (default)
[ 4.685502] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 4.685671] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 4.685959] GHES: HEST is not enabled!
[ 4.686115] isapnp: Scanning for PnP cards...
[ 5.041331] isapnp: No Plug & Play device found
[ 5.041671] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 5.044488] Linux agpgart interface v0.103
[ 5.046050] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 5.923525] i8042: Can't read CTR while initializing i8042
[ 5.924093] tsc: Refined TSC clocksource calibration: 498.050 MHz
[ 5.924119] Switched to clocksource tsc
[ 5.924222] i8042: probe of i8042 failed with error -5
[ 5.924905] mousedev: PS/2 mouse device common for all mice
[ 5.925858] rtc_cmos 00:02: RTC can wake from S4
[ 5.926384] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 5.926447] rtc_cmos 00:02: alarms up to one day, 242 bytes nvram
[ 5.926817] platform eisa.0: Probing EISA bus 0
[ 5.926850] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 5.926915] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 5.926956] platform eisa.0: EISA: Detected 0 cards
[ 5.926998] ledtrig-cpu: registered to indicate activity on CPUs
[ 5.929414] TCP: cubic registered
[ 5.929482] NET: Registered protocol family 10
[ 5.930600] mip6: Mobile IPv6
[ 5.930626] NET: Registered protocol family 17
[ 5.930670] mpls_gso: MPLS GSO support
[ 5.930938] Using IPI Shortcut mode
[ 5.931791] registered taskstats version 1
[ 5.933334] rtc_cmos 00:02: setting system clock to 2016-04-21 09:56:20 UTC (1461232580)
[ 5.933734] PM: Hibernation image not present or could not be loaded.
[ 5.934826] Freeing unused kernel memory: 672K (c1607000 - c16af000)
[ 5.934905] Write protecting the kernel text: 4260k
[ 5.935146] Write protecting the kernel read-only data: 1400k
[ 7.068501] random: systemd-udevd urandom read with 25 bits of entropy available
[ 7.215978] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 7.216008] ACPI: Power Button [PWRB]
[ 7.228813] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 7.228842] ACPI: Sleep Button [SLPB]
[ 7.229362] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 7.229382] ACPI: Power Button [PWRF]
[ 7.314630] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 7.314724] 8139cp 0000:00:0d.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 7.337582] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 7.339922] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 7.361239] 8139too 0000:00:0d.0 eth0: RealTek RTL8139 at 0x0001fc00, 00:40:ca:9d:f0:50, IRQ 11
[ 7.387243] ACPI: bus type USB registered
[ 7.387488] usbcore: registered new interface driver usbfs
[ 7.387603] usbcore: registered new interface driver hub
[ 7.392189] SCSI subsystem initialized
[ 7.398404] usbcore: registered new device driver usb
[ 7.402217] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 7.403353] ehci-pci: EHCI PCI platform driver
[ 7.403924] ehci-pci 0000:00:0f.5: EHCI Host Controller
[ 7.403969] ehci-pci 0000:00:0f.5: new USB bus registered, assigned bus number 1
[ 7.406949] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 7.413487] ehci-pci 0000:00:0f.5: irq 11, io mem 0xefffd000
[ 7.424632] ehci-pci 0000:00:0f.5: USB 2.0 started, EHCI 1.00
[ 7.424907] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 7.424927] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.424946] usb usb1: Product: EHCI Host Controller
[ 7.424964] usb usb1: Manufacturer: Linux 3.16.0-4-586 ehci_hcd
[ 7.424982] usb usb1: SerialNumber: 0000:00:0f.5
[ 7.427456] hub 1-0:1.0: USB hub found
[ 7.427513] hub 1-0:1.0: 4 ports detected
[ 7.434868] ohci-pci: OHCI PCI platform driver
[ 7.435416] ohci-pci 0000:00:0f.4: OHCI PCI host controller
[ 7.435461] ohci-pci 0000:00:0f.4: new USB bus registered, assigned bus number 2
[ 7.435567] ohci-pci 0000:00:0f.4: irq 11, io mem 0xefffe000
[ 7.456068] libata version 3.00 loaded.
[ 7.502407] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 7.502433] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.502452] usb usb2: Product: OHCI PCI host controller
[ 7.502470] usb usb2: Manufacturer: Linux 3.16.0-4-586 ohci_hcd
[ 7.502488] usb usb2: SerialNumber: 0000:00:0f.4
[ 7.505701] hub 2-0:1.0: USB hub found
[ 7.507827] hub 2-0:1.0: 4 ports detected
[ 7.521094] scsi0 : pata_cs5536
[ 7.526154] scsi1 : pata_cs5536
[ 7.526695] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 7.526709] ata2: DUMMY
[ 7.685845] ata1.00: ATA-7: FUJITSU MHW2040AT, 0000000B, max UDMA/100
[ 7.685869] ata1.00: 78140160 sectors, multi 16: LBA
[ 7.700507] ata1.00: configured for UDMA/100
[ 7.700984] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHW2040A 000B PQ: 0 ANSI: 5
[ 7.742028] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
[ 7.742285] sd 0:0:0:0: [sda] Write Protect is off
[ 7.742307] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 7.742419] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.851223] sda: sda1 sda2 < sda5 >
[ 7.856516] sd 0:0:0:0: [sda] Attached SCSI disk
[ 7.988108] usb 2-3: new low-speed USB device number 2 using ohci-pci
[ 8.197353] usb 2-3: New USB device found, idVendor=046d, idProduct=c00e
[ 8.197378] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 8.197397] usb 2-3: Product: USB-PS/2 Optical Mouse
[ 8.197414] usb 2-3: Manufacturer: Logitech
[ 8.222309] hidraw: raw HID events driver (C) Jiri Kosina
[ 8.239408] usbcore: registered new interface driver usbhid
[ 8.239425] usbhid: USB HID core driver
[ 8.247450] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:0f.4/usb2/2-3/2-3:1.0/0003:046D:C00E.0001/input/input3
[ 8.249581] hid-generic 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:0f.4-3/input0
[ 16.648949] PM: Starting manual resume from disk
[ 16.648978] PM: Hibernation image partition 8:5 present
[ 16.648989] PM: Looking for hibernation image.
[ 16.649501] PM: Image not found (code -22)
[ 16.649515] PM: Hibernation image not present or could not be loaded.
[ 16.911259] random: nonblocking pool is initialized
[ 17.324751] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 19.818230] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 19.819031] systemd[1]: Detected architecture x86.
[ 19.837826] systemd[1]: Set hostname to <geode>.
[ 26.678761] systemd[1]: Reached target User and Group Name Lookups.
[ 26.679629] systemd[1]: Listening on Journal Socket.
[ 26.680442] systemd[1]: Listening on Journal Audit Socket.
[ 26.680738] systemd[1]: Listening on Journal Socket (/dev/log).
[ 26.680972] systemd[1]: Listening on udev Kernel Socket.
[ 26.681108] systemd[1]: Reached target Remote File Systems (Pre).
[ 26.681232] systemd[1]: Reached target Remote File Systems.
[ 26.681514] systemd[1]: Listening on udev Control Socket.
[ 26.688380] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 26.688544] systemd[1]: Reached target System Time Synchronized.
[ 26.688796] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 26.689014] systemd[1]: Listening on Syslog Socket.
[ 26.689886] systemd[1]: Created slice System Slice.
[ 26.697057] systemd[1]: Mounting POSIX Message Queue File System...
[ 26.735988] systemd[1]: Starting Set the console keyboard layout...
[ 26.745996] systemd[1]: Mounting Debug File System...
[ 26.755778] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 26.783393] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 26.787128] systemd[1]: Mounting Huge Pages File System...
[ 26.806855] systemd[1]: Starting Journal Service...
[ 26.882493] systemd[1]: Starting Load Kernel Modules...
[ 26.882863] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 26.883619] systemd[1]: Created slice User and Session Slice.
[ 26.883780] systemd[1]: Reached target Slices.
[ 26.883928] systemd[1]: Reached target Encrypted Volumes.
[ 26.885329] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 27.224844] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 27.235782] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 27.810191] lp: driver loaded but no devices found
[ 27.854909] ppdev: user-space parallel port driver
[ 28.291779] systemd[1]: Started Create Static Device Nodes in /dev.
[ 28.310195] systemd[1]: Starting udev Kernel Device Manager...
[ 28.339521] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 28.387122] systemd[1]: Mounted Debug File System.
[ 28.396984] systemd[1]: Mounted Huge Pages File System.
[ 28.404496] systemd[1]: Mounted POSIX Message Queue File System.
[ 28.424376] systemd[1]: Started Remount Root and Kernel File Systems.
[ 28.538398] systemd[1]: Started Load Kernel Modules.
[ 28.654358] systemd[1]: Started Journal Service.
[ 29.836451] systemd-journald[167]: Received request to flush runtime journal from PID 1
[ 31.402765] ACPI: AC Adapter [AC] (on-line)
[ 31.721549] AMD Geode RNG detected
[ 31.738223] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[ 31.738243] PCI: setting IRQ 10 as level-triggered
[ 31.938503] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 32.137384] Geode LX AES 0000:00:01.2: GEODE AES engine enabled.
[ 32.138288] ACPI Warning: SystemIO range 0x0000000000006100-0x00000000000061FF conflicts with OpRegion 0x0000000000006100-0x00000000000061FF (\_SB_.GPIO) (20140424/utaddress-254)
[ 32.138334] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 32.138481] cs5535-mfd 0000:00:0f.0: MFD add devices failed: -16
[ 32.139067] cs5535-mfd: probe of 0000:00:0f.0 failed with error -16
[ 34.724018] Adding 1646624k swap on /dev/sda5. Priority:-1 extents:1 across:1646624k FS
[ 51.306212] warning: process `ntpd' used the deprecated sysctl system call with 1.40.6.
[ 54.629510] 8139too 0000:00:0d.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 124.619944] snd-malloc: invalid device type 0
[ 124.625796] snd-malloc: invalid device type 0
[ 124.637583] snd-malloc: invalid device type 0
[ 124.642127] snd-malloc: invalid device type 0
[ 124.933192] snd-malloc: invalid device type 0
[ 124.934499] snd-malloc: invalid device type 0
[ 124.937701] snd-malloc: invalid device type 0
[ 124.942995] snd-malloc: invalid device type 0
--- End Message ---