--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-4.6.0-0.bpo.1-686-pae: Bug in cpufreq driver
- From: Alain <rpnpif@free.fr>
- Date: Sun, 17 Jul 2016 21:43:19 +0200
- Message-id: <20160717194319.3126.96132.reportbug@Asus-901>
Package: src:linux
Version: 4.6.3-1~bpo8+1
Severity: normal
Dear Maintainer,
After a resume from hibernation for this computer, a crash of cpufreq driver
is generated with report in syslog.
No other effect was seen.
Perhaps, cpufreq is disabled for all the session. I will verify that.
All others functions seem to work fine.
This issue occurred on each time that the system is waking after hibernation.
-- Package-specific info:
** Version:
Linux version 4.6.0-0.bpo.1-686-pae (debian-kernel@lists.debian.org) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Debian 4.6.3-1~bpo8+1 (2016-07-13)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.6.0-0.bpo.1-686-pae root=UUID=2ed3bc82-5cc0-4529-a13c-2e6f80b5b588 ro resume=/dev/sdb1 quiet
** Tainted: WE (8704)
* Taint on warning.
* Unsigned module has been loaded (currently expected).
** Kernel log:
[ 6571.518806] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6571.525652] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6575.466579] Syncing filesystems ... done.
[ 6575.467671] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 6575.470210] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
[ 6575.470225] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff]
[ 6575.470248] PM: Basic memory bitmaps created
[ 6575.470465] PM: Preallocating image memory... done (allocated 110707 pages)
[ 6580.488736] PM: Allocated 442828 kbytes in 5.01 seconds (88.38 MB/s)
[ 6580.488743] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 6580.490618] Suspending console(s) (use no_console_suspend to debug)
[ 6580.804374] PM: freeze of devices complete after 313.728 msecs
[ 6580.820197] PM: late freeze of devices complete after 15.803 msecs
[ 6580.821464] PM: noirq freeze of devices complete after 1.255 msecs
[ 6580.821518] ACPI: Preparing to enter system sleep state S4
[ 6580.823537] ACPI : EC: EC stopped
[ 6580.823539] PM: Saving platform NVS memory
[ 6580.824595] Disabling non-boot CPUs ...
[ 6580.824960] Broke affinity for irq 1
[ 6580.824972] Broke affinity for irq 9
[ 6580.824979] Broke affinity for irq 12
[ 6580.824990] Broke affinity for irq 15
[ 6580.824996] Broke affinity for irq 16
[ 6580.825016] Broke affinity for irq 23
[ 6580.826174] smpboot: CPU 1 is now offline
[ 6580.837185] PM: Creating hibernation image:
[ 6580.840014] PM: Need to copy 102363 pages
[ 6580.840014] PM: Normal pages needed: 86577 + 1024, available pages: 141138
[ 6580.840014] PM: Restoring platform NVS memory
[ 6580.840014] ACPI : EC: EC started
[ 6580.840014] Enabling non-boot CPUs ...
[ 6580.856700] x86: Booting SMP configuration:
[ 6580.856703] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 6580.826071] Initializing CPU#1
[ 6580.826071] Disabled fast string operations
[ 6580.857311] cache: parent cpu1 should not be sleeping
[ 6580.857956] CPU1 is up
[ 6580.858577] ACPI: Waking up from system sleep state S4
[ 6581.160487] ------------[ cut here ]------------
[ 6581.160501] WARNING: CPU: 0 PID: 2308 at /home/zumbi/linux-4.6.3/drivers/cpufreq/cpufreq.c:2173 cpufreq_update_policy+0xe5/0x140
[ 6581.160570] Modules linked in: hmac(E) drbg(E) ansi_cprng(E) ctr(E) ccm(E) binfmt_misc(E) ip6t_REJECT(E) nf_reject_ipv6(E) xt_hl(E) ip6t_rt(E) nf_conntrack_ipv6(E) nf_defrag_ipv6(E) ipt_REJECT(E) nf_reject_ipv4(E) xt_limit(E) xt_tcpudp(E) xt_addrtype(E) nf_conntrack_ipv4(E) nf_defrag_ipv4(E) xt_conntrack(E) ip6table_filter(E) ip6_tables(E) nf_conntrack_netbios_ns(E) nf_conntrack_broadcast(E) nf_nat_ftp(E) nf_nat(E) nf_conntrack_ftp(E) nf_conntrack(E) iptable_filter(E) ip_tables(E) x_tables(E) iTCO_wdt(E) iTCO_vendor_support(E) arc4(E) rt2800pci(E) uvcvideo(E) rt2800mmio(E) videobuf2_vmalloc(E) videobuf2_memops(E) rt2800lib(E) videobuf2_v4l2(E) rt2x00pci(E) videobuf2_core(E) rt2x00mmio(E) rt2x00lib(E) videodev(E) eeprom_93cx6(E) media(E) mac80211(E) i915(E) cfg80211(E) evdev(E) joydev(E) coretemp(E)
[ 6581.160638] pcspkr(E) serio_raw(E) eeepc_laptop(E) sparse_keymap(E) lpc_ich(E) i2c_i801(E) mfd_core(E) crc_ccitt(E) rng_core(E) rfkill(E) snd_hda_codec_realtek(E) snd_hda_codec_generic(E) drm_kms_helper(E) snd_hda_intel(E) snd_hda_codec(E) video(E) drm(E) snd_hda_core(E) snd_hwdep(E) snd_pcm(E) battery(E) snd_timer(E) snd(E) ac(E) button(E) shpchp(E) soundcore(E) i2c_algo_bit(E) acpi_cpufreq(E) tpm_tis(E) tpm(E) processor(E) loop(E) fuse(E) parport_pc(E) ppdev(E) lp(E) parport(E) autofs4(E) ext4(E) crc16(E) jbd2(E) mbcache(E) sg(E) sd_mod(E) ata_generic(E) psmouse(E) ata_piix(E) libata(E) scsi_mod(E) ehci_pci(E) uhci_hcd(E) ehci_hcd(E) usbcore(E) usb_common(E) atl1e(E) thermal(E)
[ 6581.160645] CPU: 0 PID: 2308 Comm: kworker/0:0 Tainted: G W E 4.6.0-0.bpo.1-686-pae #1 Debian 4.6.3-1~bpo8+1
[ 6581.160647] Hardware name: ASUSTeK Computer INC. 901/901, BIOS 2103 06/11/2009
[ 6581.160656] Workqueue: kacpi_notify acpi_os_execute_deferred
[ 6581.160667] 00000286 03caffe7 f4e73da8 c12d8b5c 00000000 00000000 c106d71a c165de34
[ 6581.160675] 00000000 00000904 c16bb51c 0000087d c143d475 0000087d 00000009 c143d475
[ 6581.160683] f6603a00 fffffffb f4e73ec4 f4e73dbc c106d82a 00000009 00000000 00000000
[ 6581.160684] Call Trace:
[ 6581.160695] [<c12d8b5c>] ? dump_stack+0x55/0x79
[ 6581.160701] [<c106d71a>] ? __warn+0xea/0x110
[ 6581.160706] [<c143d475>] ? cpufreq_update_policy+0xe5/0x140
[ 6581.160711] [<c143d475>] ? cpufreq_update_policy+0xe5/0x140
[ 6581.160716] [<c106d82a>] ? warn_slowpath_null+0x2a/0x30
[ 6581.160720] [<c143d475>] ? cpufreq_update_policy+0xe5/0x140
[ 6581.160725] [<c138075d>] ? acpi_ns_lookup+0x215/0x31d
[ 6581.160730] [<c143d4d0>] ? cpufreq_update_policy+0x140/0x140
[ 6581.160741] [<f84182b3>] ? acpi_processor_notify+0x4c/0xc9 [processor]
[ 6581.160746] [<c1376c9f>] ? acpi_ev_notify_dispatch+0x35/0x49
[ 6581.160751] [<c13616c5>] ? acpi_os_execute_deferred+0x11/0x1b
[ 6581.160756] [<c10852cd>] ? process_one_work+0x10d/0x380
[ 6581.160761] [<c10833fb>] ? pwq_activate_delayed_work+0x3b/0xa0
[ 6581.160766] [<c1085c49>] ? worker_thread+0x49/0x470
[ 6581.160771] [<c10abacf>] ? __wake_up_locked+0x1f/0x30
[ 6581.160776] [<c1085c00>] ? rescuer_thread+0x2e0/0x2e0
[ 6581.160780] [<c108a4d3>] ? kthread+0xb3/0xd0
[ 6581.160785] [<c10039b7>] ? do_fast_syscall_32+0x147/0x220
[ 6581.160792] [<c156df49>] ? ret_from_kernel_thread+0x21/0x38
[ 6581.160795] [<c108a420>] ? kthread_park+0x50/0x50
[ 6581.160799] ---[ end trace 1cafabec5d162eab ]---
[ 6582.700382] PM: noirq restore of devices complete after 16.088 msecs
[ 6582.700915] PM: early restore of devices complete after 0.490 msecs
[ 6582.772202] usb usb1: root hub lost power or was reset
[ 6582.772259] usb usb3: root hub lost power or was reset
[ 6582.772314] usb usb4: root hub lost power or was reset
[ 6582.772362] usb usb5: root hub lost power or was reset
[ 6582.772404] usb usb2: root hub lost power or was reset
[ 6582.776332] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 6582.777717] rtc_cmos 00:01: System wakeup disabled by ACPI
[ 6582.783300] sd 1:0:0:0: [sda] Starting disk
[ 6582.783453] sd 1:0:1:0: [sdb] Starting disk
[ 6582.946161] ata2.01: ACPI cmd ef/03:44:00:00:00:b0 (SET FEATURES) filtered out
[ 6582.946167] ata2.01: ACPI cmd ef/03:0c:00:00:00:b0 (SET FEATURES) filtered out
[ 6582.949037] ata2.00: ACPI cmd ef/03:44:00:00:00:a0 (SET FEATURES) filtered out
[ 6582.949043] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[ 6582.951836] ata2.00: configured for UDMA/66
[ 6582.954580] ata2.01: configured for UDMA/66
[ 6583.096149] usb 2-8: reset high-speed USB device number 3 using ehci-pci
[ 6583.460639] eeepc_laptop: BIOS says wireless lan is unblocked, but the pci device is absent
[ 6583.460642] eeepc_laptop: skipped wireless hotplug as probably inappropriate for this model
[ 6583.461405] PM: restore of devices complete after 691.070 msecs
[ 6583.465859] Restarting kernel threads ... done.
[ 6583.466192] PM: Basic memory bitmaps freed
[ 6583.466199] Restarting tasks ... done.
...
[ 6585.364645] wlan0: associated
** Model information
** Loaded modules:
hmac(E)
drbg(E)
ansi_cprng(E)
ctr(E)
ccm(E)
binfmt_misc(E)
ip6t_REJECT(E)
nf_reject_ipv6(E)
xt_hl(E)
ip6t_rt(E)
nf_conntrack_ipv6(E)
nf_defrag_ipv6(E)
ipt_REJECT(E)
nf_reject_ipv4(E)
xt_limit(E)
xt_tcpudp(E)
xt_addrtype(E)
nf_conntrack_ipv4(E)
nf_defrag_ipv4(E)
xt_conntrack(E)
ip6table_filter(E)
ip6_tables(E)
nf_conntrack_netbios_ns(E)
nf_conntrack_broadcast(E)
nf_nat_ftp(E)
nf_nat(E)
nf_conntrack_ftp(E)
nf_conntrack(E)
iptable_filter(E)
ip_tables(E)
x_tables(E)
iTCO_wdt(E)
iTCO_vendor_support(E)
arc4(E)
rt2800pci(E)
uvcvideo(E)
rt2800mmio(E)
videobuf2_vmalloc(E)
videobuf2_memops(E)
rt2800lib(E)
videobuf2_v4l2(E)
rt2x00pci(E)
videobuf2_core(E)
rt2x00mmio(E)
rt2x00lib(E)
videodev(E)
eeprom_93cx6(E)
media(E)
mac80211(E)
i915(E)
cfg80211(E)
evdev(E)
joydev(E)
coretemp(E)
pcspkr(E)
serio_raw(E)
eeepc_laptop(E)
sparse_keymap(E)
lpc_ich(E)
i2c_i801(E)
mfd_core(E)
crc_ccitt(E)
rng_core(E)
rfkill(E)
snd_hda_codec_realtek(E)
snd_hda_codec_generic(E)
drm_kms_helper(E)
snd_hda_intel(E)
snd_hda_codec(E)
video(E)
drm(E)
snd_hda_core(E)
snd_hwdep(E)
snd_pcm(E)
battery(E)
snd_timer(E)
snd(E)
ac(E)
button(E)
shpchp(E)
soundcore(E)
i2c_algo_bit(E)
acpi_cpufreq(E)
tpm_tis(E)
tpm(E)
processor(E)
loop(E)
fuse(E)
parport_pc(E)
ppdev(E)
lp(E)
parport(E)
autofs4(E)
ext4(E)
crc16(E)
jbd2(E)
mbcache(E)
sg(E)
sd_mod(E)
ata_generic(E)
psmouse(E)
ata_piix(E)
libata(E)
scsi_mod(E)
ehci_pci(E)
uhci_hcd(E)
ehci_hcd(E)
usbcore(E)
usb_common(E)
atl1e(E)
thermal(E)
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GSE Express Memory Controller Hub [8086:27ac] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GSE Express Integrated Graphics Controller [8086:27ae] (rev 03) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7f00000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at dc80 [size=8]
Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at f7ec0000 (32-bit, non-prefetchable) [size=256K]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f7f80000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation NM10/ICH7 Family High Definition Audio Controller [8086:27d8] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:831a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 28
Region 0: Memory at f7eb8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: 40000000-401fffff
Prefetchable memory behind bridge: 0000000040200000-00000000403fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fbf00000-fbffffff
Prefetchable memory behind bridge: 0000000040400000-00000000405fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 3 [8086:27d4] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: 40600000-407fffff
Prefetchable memory behind bridge: 0000000040800000-00000000409fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 4 [8086:27d6] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=02, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f8000000-fbefffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f6ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at d480 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 22
Region 4: I/O ports at d800 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 21
Region 4: I/O ports at d880 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 20
Region 4: I/O ports at dc00 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7eb7c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01 [Subtractive decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=06, subordinate=06, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode] [8086:27c4] (rev 02) (prog-if 80 [Master])
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374
Region 4: I/O ports at ffa0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation NM10/ICH7 Family SMBus Controller [8086:27da] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 0400 [size=32]
01:00.0 Network controller [0280]: Ralink corp. RT2790 Wireless 802.11n 1T/2R PCIe [1814:0781]
Subsystem: Ralink corp. RT2790 Wireless 802.11n 1T/2R PCIe [1814:2790]
Physical Slot: eeepc-wifi
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at f8000000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: rt2800pci
04:00.0 Ethernet controller [0200]: Qualcomm Atheros AR8121/AR8113/AR8114 Gigabit or Fast Ethernet [1969:1026] (rev b0)
Subsystem: ASUSTeK Computer Inc. Device [1043:8324]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fbfc0000 (64-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at ec80 [size=128]
Capabilities: <access denied>
Kernel driver in use: ATL1E
** USB devices:
Bus 002 Device 003: ID 04f2:b071 Chicony Electronics Co., Ltd 2.0M UVC Webcam / CNF7129
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: 8.5
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 4.6.0-0.bpo.1-686-pae (SMP w/2 CPU cores)
Locale: LANG=fr_FR.utf8, LC_CTYPE=fr_FR.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-4.6.0-0.bpo.1-686-pae depends on:
ii initramfs-tools [linux-initramfs-tool] 0.120+deb8u2
ii kmod 18-3
ii linux-base 4.3~bpo8+1
Versions of packages linux-image-4.6.0-0.bpo.1-686-pae recommends:
ii firmware-linux-free 3.3
ii irqbalance 1.1.0-2~bpo8+1
Versions of packages linux-image-4.6.0-0.bpo.1-686-pae suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02~beta2-22+deb8u1
pn linux-doc-4.6 <none>
Versions of packages linux-image-4.6.0-0.bpo.1-686-pae is related to:
ii firmware-amd-graphics 20160110-1~bpo8+1
ii firmware-atheros 20160110-1~bpo8+1
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux-nonfree 20160110-1~bpo8+1
ii firmware-misc-nonfree 20160110-1~bpo8+1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
--- End Message ---