--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-4.3.0-1-amd64: Machine becomes unresponsive after about 10 hours: hard shutdown needed
- From: Gilles Sadowski <gilles@harfang.homelinux.org>
- Date: Sun, 20 Dec 2015 14:45:17 +0100
- Message-id: <145061911720.11915.1081169586534829072.reportbug@dawn.harfang.homelinux.org>
Package: src:linux
Version: 4.3.3-2
Severity: normal
Dear Maintainer,
* What led up to the situation?
Since the upgrade to kernel 4.3, the machine becomes unresponsive after
a few hours (keyborad frozen, blank screen) necessitating a hard reboot.
* What exactly did you do (or not do) that was effective (or
ineffective)?
The machine boots, and it is possible to work normally.
I use the KDE environment (plasmashell, kwin_x11) and quite for some time
(i.e. with earlier kernels too) in multisession setups, it causes high CPU
usage by the kwin_x11 process on the unused terminal.
After some time, the system starts to massively swap even though I do not
use additional resources. It usually happens during the night.
The only user applications were: KDE desktop, a few "Konsole" terminals,
"chromium" web browser.
>From this point, the HDD thrashes constantly although there is 8GB RAM.
[The sound reminds of the old days when 8 _MB_ was a lot...]
Here is a snapshot of the top of the "top" screen:
---CUT---
Tasks: 254 total, 1 running, 253 sleeping, 0 stopped, 0 zombie
%Cpu(s): 0.6 us, 22.1 sy, 0.0 ni, 77.0 id, 0.3 wa, 0.0 hi, 0.0 si, 0.0 st
KiB Mem : 8131532 total, 194708 free, 6832256 used, 1104568 buff/cache
KiB Swap: 1949692 total, 1162480 free, 787212 used. 279640 avail Mem
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
42 root 20 0 0 0 0 S 82.7 0.0 26:29.37 kswapd0
32404 root 20 0 0 0 0 S 4.7 0.0 0:05.28 kworker/u8:0
2989 root 20 0 209088 38920 30692 S 1.3 0.5 13:43.04 Xorg
3216 eran 20 0 3061812 39936 31476 S 0.7 0.5 9:09.08 kwin_x11
3242 eran 20 0 243604 5408 3864 S 0.7 0.1 7:19.65 gkrellm
2018 root 20 0 42596 3824 3020 R 0.3 0.0 0:00.08 top
2032 root 20 0 106792 6704 5572 S 0.3 0.1 0:00.01 sshd
2875 root 20 0 43836 1612 1428 S 0.3 0.0 0:00.95 wpa_supplicant
2990 kdm 20 0 389156 4836 3820 S 0.3 0.1 0:38.13 kdm_greet
3310 eran 20 0 494492 28848 22320 S 0.3 0.4 1:00.13 konsole
1 root 20 0 15704 572 548 S 0.0 0.0 0:00.75 init
---CUT---
Thanks,
Gilles
-- Package-specific info:
** Version:
Linux version 4.3.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 5.3.1 20151207 (Debian 5.3.1-3) ) #1 SMP Debian 4.3.3-2 (2015-12-17)
** Command line:
BOOT_IMAGE=/vmlinuz-4.3.0-1-amd64 root=/dev/mapper/dusk-root ro quiet
** Tainted: PO (4097)
* Proprietary module has been loaded.
* Out-of-tree module has been loaded.
** Kernel log:
[ 8.406108] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 8.406109] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 8.406110] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 8.415021] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 8.415114] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 8.415134] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 8.415152] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 8.415171] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 8.415189] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 8.433262] usblp 3-2:1.0: usblp1: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04F9 pid 0x02B3
[ 8.433897] usblp 3-5:1.0: usblp2: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0022
[ 8.439178] usblp 3-1.2:1.0: usblp3: USB Bidirectional printer dev 6 if 0 alt 0 proto 2 vid 0x03F0 pid 0x3004
[ 8.439189] usbcore: registered new interface driver usblp
[ 8.445099] input: PC Speaker as /devices/platform/pcspkr/input/input15
[ 8.472046] [drm] Initialized drm 1.1.0 20060810
[ 8.732042] iTCO_vendor_support: vendor-support=0
[ 8.735234] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 8.735260] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
[ 8.735322] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 8.897446] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
[ 8.897486] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
[ 9.168730] AVX2 version of gcm_enc/dec engaged.
[ 9.168732] AES CTR mode by8 optimization enabled
[ 9.250052] sha256_ssse3: Using AVX2 optimized SHA-256 implementation
[ 9.534872] r8169 0000:03:00.0: firmware: direct-loading firmware rtl_nic/rtl8168g-2.fw
[ 9.571664] nvidia: module license 'NVIDIA' taints kernel.
[ 9.571665] Disabling lock debugging due to kernel taint
[ 9.578257] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 9.578505] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
[ 9.578508] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 340.96 Sun Nov 8 22:33:28 PST 2015
[ 9.580246] r8169 0000:03:00.0 eth0: link down
[ 9.580265] r8169 0000:03:00.0 eth0: link down
[ 9.580321] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 10.134263] intel_rapl: Found RAPL domain package
[ 10.134273] intel_rapl: Found RAPL domain core
[ 10.134280] intel_rapl: Found RAPL domain dram
[ 10.313278] rtl8192cu: Chip version 0x10
[ 10.397080] rtl8192cu: MAC address: 74:da:38:08:4d:71
[ 10.397083] rtl8192cu: Board Type 0
[ 10.397327] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1
[ 10.397346] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
[ 10.410188] usb 1-1.3: firmware: direct-loading firmware rtlwifi/rtl8192cufw_TMSC.bin
[ 10.428727] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 10.428874] usbcore: registered new interface driver rtl8192cu
[ 11.083961] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 11.168194] r8169 0000:03:00.0 eth0: link up
[ 11.168202] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 11.192576] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 11.426561] lp: driver loaded but no devices found
[ 11.480178] ppdev: user-space parallel port driver
[ 11.499063] loop: module loaded
[ 12.414857] Adding 1949692k swap on /dev/mapper/dusk-swap. Priority:-1 extents:1 across:1949692k FS
[ 17.322146] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
[ 17.346932] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 17.487212] EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: (null)
[ 17.527548] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: (null)
[ 17.583072] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null)
[ 17.601784] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null)
[ 17.636242] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[ 17.673593] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
[ 17.682567] FAT-fs (sdb9): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 17.697536] FAT-fs (sdb9): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 19.044846] RPC: Registered named UNIX socket transport module.
[ 19.044848] RPC: Registered udp transport module.
[ 19.044849] RPC: Registered tcp transport module.
[ 19.044849] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 19.104164] FS-Cache: Loaded
[ 19.128762] FS-Cache: Netfs 'nfs' registered for caching
[ 19.156072] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 19.890225] cfg80211: World regulatory domain updated:
[ 19.890227] cfg80211: DFS Master region: unset
[ 19.890228] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 19.890230] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 19.890231] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 19.890232] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 19.890233] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 19.890234] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 19.890235] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 19.890236] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 19.890237] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 26.536395] Bluetooth: Core ver 2.20
[ 26.536406] NET: Registered protocol family 31
[ 26.536407] Bluetooth: HCI device and connection manager initialized
[ 26.536410] Bluetooth: HCI socket layer initialized
[ 26.536412] Bluetooth: L2CAP socket layer initialized
[ 26.536415] Bluetooth: SCO socket layer initialized
[ 26.943052] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 26.943054] Bluetooth: BNEP filters: protocol multicast
[ 26.943057] Bluetooth: BNEP socket layer initialized
[ 29.476362] systemd-logind[2819]: New seat seat0.
[ 29.793852] systemd-logind[2819]: Watching system buttons on /dev/input/event6 (Power Button)
[ 29.793919] systemd-logind[2819]: Watching system buttons on /dev/input/event5 (Power Button)
[ 30.399856] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 30.401860] rtl8192cu: MAC auto ON okay!
[ 30.434639] rtl8192cu: Tx queue select: 0x05
[ 30.846996] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 31.611336] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 47.558228] systemd-logind[2819]: Failed to start user service, ignoring: Unknown unit: user@1000.service
[ 47.561132] systemd-logind[2819]: New session 1 of user eran.
[ 2932.287169] snd_hda_intel 0000:00:1b.0: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
** Model information
sys_vendor: MEDION
product_name: P5395 2389
product_version: H81EM2W08.308
chassis_vendor: MEDION
chassis_version: To Be Filled By O.E.M.
bios_vendor: American Megatrends Inc.
bios_version: H81EM2W08.308
board_vendor: MEDION
board_name: H81H3-EM2
board_version: H81EM2W08.308
** Loaded modules:
bnep
bluetooth
snd_hrtimer
snd_seq
snd_seq_device
binfmt_misc
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
grace
fscache
sunrpc
nls_utf8
nls_cp437
vfat
fat
loop
parport_pc
ppdev
lp
parport
arc4
rtl8192cu
rtl_usb
rtl8192c_common
rtlwifi
mac80211
cfg80211
rfkill
intel_rapl
iosf_mbi
x86_pkg_temp_thermal
intel_powerclamp
coretemp
kvm_intel
kvm
nvidia(PO)
crct10dif_pclmul
crc32_pclmul
sha256_ssse3
sha256_generic
hmac
drbg
ansi_cprng
aesni_intel
aes_x86_64
lrw
gf128mul
glue_helper
iTCO_wdt
iTCO_vendor_support
snd_hda_codec_hdmi
ablk_helper
evdev
cryptd
drm
psmouse
serio_raw
pcspkr
usblp
snd_hda_codec_realtek
snd_hda_codec_generic
efi_pstore
snd_hda_intel
snd_hda_codec
efivars
snd_hda_core
snd_hwdep
snd_pcm
snd_timer
battery
sg
tpm_tis
mei_me
tpm
shpchp
i2c_i801
lpc_ich
mfd_core
snd
video
mei
button
soundcore
processor
ext4
crc16
mbcache
jbd2
dm_mod
md_mod
sr_mod
cdrom
sd_mod
ums_realtek
hid_generic
usbhid
hid
uas
usb_storage
ahci
libahci
xhci_pci
crc32c_intel
xhci_hcd
libata
scsi_mod
ehci_pci
ehci_hcd
r8169
mii
usbcore
usb_common
fan
thermal
** Network interface configuration:
auto lo
iface lo inet loopback
allow-hotplug eth0
iface eth0 inet static
address 192.168.107.10
netmask 255.255.255.0
network 192.168.107.0
broadcast 192.168.107.255
gateway 192.168.107.1
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether c0:3f:d5:ad:70:f0 brd ff:ff:ff:ff:ff:ff
inet 192.168.107.10/24 brd 192.168.107.255 scope global eth0
valid_lft forever preferred_lft forever
inet6 fe80::c23f:d5ff:fead:70f0/64 scope link
valid_lft forever preferred_lft forever
3: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000
link/ether 74:da:38:08:4d:71 brd ff:ff:ff:ff:ff:ff
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
eth0: 133786792 99195 0 0 0 0 0 13 4543609 55602 0 0 0 0 0 0
wlan0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
lo: 35292 142 0 0 0 0 0 0 35292 142 0 0 0 0 0 0
*** Protocol statistics:
Ip:
Forwarding: 2
95066 total packets received
0 forwarded
0 incoming packets discarded
95066 incoming packets delivered
55623 requests sent out
Icmp:
0 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
5 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 5
IcmpMsg:
OutType3: 5
Tcp:
396 active connections openings
13 passive connection openings
13 failed connection attempts
38 connection resets received
1 connections established
94810 segments received
55206 segments send out
169 segments retransmited
1 bad segments received.
53 resets sent
Udp:
343 packets received
5 packets to unknown port received.
0 packet receive errors
323 packets sent
0 receive buffer errors
0 send buffer errors
IgnoredMulti: 2
UdpLite:
TcpExt:
5 resets received for embryonic SYN_RECV sockets
28 TCP sockets finished time wait in fast timer
339 delayed acks sent
Quick ack mode was activated 27 times
26 packets directly queued to recvmsg prequeue.
TCPDirectCopyFromPrequeue: 6526
86613 packet headers predicted
18 packets header predicted and directly queued to user
1885 acknowledgments not containing data payload received
2267 predicted acknowledgments
TCPSackRecovery: 1
TCPDSACKUndo: 1
15 congestion windows recovered without slow start after partial ack
1 fast retransmits
TCPTimeouts: 27
TCPLossProbes: 113
TCPLossProbeRecovery: 3
TCPDSACKOldSent: 27
TCPDSACKRecv: 26
3 connections reset due to unexpected data
26 connections reset due to early user close
1 connections aborted due to timeout
TCPDSACKIgnoredNoUndo: 13
TCPSpuriousRTOs: 1
TCPSackShiftFallback: 1
TCPDeferAcceptDrop: 6
TCPRcvCoalesce: 4447
TCPOFOQueue: 4038
TCPChallengeACK: 1
TCPSYNChallenge: 1
TCPAutoCorking: 238
TCPSynRetrans: 35
TCPOrigDataSent: 4155
TCPKeepAlive: 462
IpExt:
InMcastPkts: 38
OutMcastPkts: 27
InBcastPkts: 2
InOctets: 132211642
OutOctets: 3765217
InMcastOctets: 7512
OutMcastOctets: 3750
InBcastOctets: 1152
InNoECTPkts: 95223
InECT0Pkts: 4
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 4th Gen Core Processor DRAM Controller [8086:0c00] (rev 06)
Subsystem: Elitegroup Computer Systems Device [1019:99d2]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: hsw_uncore
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller [8086:0c01] (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 25
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f6000000-f70fffff
Prefetchable memory behind bridge: 00000000e0000000-00000000f1ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:14.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI [8086:8c31] (rev 05) (prog-if 30 [XHCI])
Subsystem: Elitegroup Computer Systems Device [1019:99d2]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 29
Region 0: Memory at f7200000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
00:16.0 Communication controller [0780]: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 [8086:8c3a] (rev 04)
Subsystem: Elitegroup Computer Systems Device [1019:99d2]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 31
Region 0: Memory at f721a000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
00:1a.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 [8086:8c2d] (rev 05) (prog-if 20 [EHCI])
Subsystem: Elitegroup Computer Systems Device [1019:99d2]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7218000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller [8086:8c20] (rev 05)
Subsystem: Elitegroup Computer Systems Device [1019:9fff]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 32
Region 0: Memory at f7210000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 [8086:8c10] (rev d5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 26
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f2200000-f23fffff
Prefetchable memory behind bridge: 00000000f2400000-00000000f25fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 [8086:8c14] (rev d5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 27
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f7100000-f71fffff
Prefetchable memory behind bridge: 00000000f2100000-00000000f21fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 [8086:8c26] (rev 05) (prog-if 20 [EHCI])
Subsystem: Elitegroup Computer Systems Device [1019:99d2]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7217000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge [0601]: Intel Corporation C220 Series Chipset Family H81 Express LPC Controller [8086:8c5c] (rev 05)
Subsystem: Elitegroup Computer Systems Device [1019:99d2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] [8086:8c02] (rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: Elitegroup Computer Systems Device [1019:99d2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 30
Region 0: I/O ports at f070 [size=8]
Region 1: I/O ports at f060 [size=4]
Region 2: I/O ports at f050 [size=8]
Region 3: I/O ports at f040 [size=4]
Region 4: I/O ports at f020 [size=32]
Region 5: Memory at f7216000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller [8086:8c22] (rev 05)
Subsystem: Elitegroup Computer Systems Device [1019:99d2]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 0
Region 0: Memory at f7215000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f000 [size=32]
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GM107 [GeForce GTX 750 Ti] [10de:1380] (rev a2) (prog-if 00 [VGA controller])
Subsystem: Elitegroup Computer Systems Device [1019:1028]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 33
Region 0: Memory at f6000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at f0000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at e000 [size=128]
[virtual] Expansion ROM at f7000000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: nvidia
01:00.1 Audio device [0403]: NVIDIA Corporation Device [10de:0fbc] (rev a1)
Subsystem: Elitegroup Computer Systems Device [1019:1028]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f7080000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 0c)
Subsystem: Elitegroup Computer Systems Device [1019:8116]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 28
Region 0: I/O ports at d000 [size=256]
Region 2: Memory at f7100000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at f2100000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
** USB devices:
Bus 002 Device 002: ID 8087:8000 Intel Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0bda:8176 Realtek Semiconductor Corp. RTL8188CUS 802.11n WLAN Adapter
Bus 001 Device 002: ID 8087:8008 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 007: ID 0463:ffff MGE UPS Systems UPS
Bus 003 Device 005: ID 04f9:0022 Brother Industries, Ltd HL-5150D series
Bus 003 Device 003: ID 04f9:02b3 Brother Industries, Ltd MFC J4510DW
Bus 003 Device 009: ID 04d9:1603 Holtek Semiconductor, Inc. Keyboard
Bus 003 Device 008: ID 05b8:3280 Agiler, Inc.
Bus 003 Device 006: ID 03f0:3004 Hewlett-Packard DeskJet 980c
Bus 003 Device 004: ID 04f3:0103 Elan Microelectronics Corp. ActiveJet K-2024 Multimedia Keyboard
Bus 003 Device 002: ID 05e3:0608 Genesys Logic, Inc. Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: stretch/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 4.3.0-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: sysvinit (via /sbin/init)
Versions of packages linux-image-4.3.0-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.58
ii initramfs-tools [linux-initramfs-tool] 0.120
ii kmod 21-1
ii linux-base 4.0
Versions of packages linux-image-4.3.0-1-amd64 recommends:
ii firmware-linux-free 3.4
ii irqbalance 1.0.9-1
Versions of packages linux-image-4.3.0-1-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-efi 2.02~beta2-33
pn linux-doc-4.3 <none>
Versions of packages linux-image-4.3.0-1-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
ii firmware-realtek 20151207-1
pn xen-hypervisor <none>
-- debconf information:
linux-image-4.3.0-1-amd64/prerm/removing-running-kernel-4.3.0-1-amd64: true
linux-image-4.3.0-1-amd64/postinst/depmod-error-initrd-4.3.0-1-amd64: false
linux-image-4.3.0-1-amd64/postinst/mips-initrd-4.3.0-1-amd64:
--- End Message ---