Your message dated Sun, 09 May 2021 07:02:47 -0700 (PDT) with message-id <6097eb87.1c69fb81.87d7f.49f4@mx.google.com> and subject line Closing this bug (BTS maintenance for src:linux bugs) has caused the Debian Bug report #804417, regarding linux-image-4.3.0-trunk-686: Failed to find cpu0 device node to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 804417: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=804417 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: submit@bugs.debian.org
- Subject: linux-image-4.3.0-trunk-686: Failed to find cpu0 device node
- From: Paul Menzel <paul.menzel@giantmonkey.de>
- Date: Sun, 08 Nov 2015 10:38:07 +0100
- Message-id: <1446975487.1653.1.camel@giantmonkey.de>
- Reply-to: kontakt+thinkspot@giantmonkey.de
Package: src:linux Version: 4.3-1~exp1 Severity: normal Dear Debian folks, starting with Linux 4.3 the following message is printed to the screen during start. Failed to find cpu0 device node In ticket #1254210 in the Red Hat Bugzilla [1], Josh Boyer writes the following. > This is a warning message from the OF layer in the kernel. Since i686 > has CONFIG_OF enabled (for OLPC reasons) and your machine doesn't > utilize OF or device trees, it errors out. There's nothing actually > wrong here. If nothing is actually wrong, should the message even be shown? Thanks, Paul [1] https://bugzilla.redhat.com/show_bug.cgi?id=1254210 -- Package-specific info: ** Version: Linux version 4.3.0-trunk-686 (debian-kernel@lists.debian.org) (gcc version 5.2.1 20151028 (Debian 5.2.1-23) ) #1 SMP Debian 4.3-1~exp1 (2015-11-04) ** Command line: BOOT_IMAGE=/vmlinuz-4.3.0-trunk-686 root=UUID=0198e82a-32df-4f18-bec0-3e08802b084d ro quiet noisapnp pcie_aspm=force pcie_aspm.policy=powersave nmi_watchdog=0 ** Not tainted ** Kernel log: [attached] ** Model information not available ** Loaded modules: ctr ccm cpufreq_powersave cpufreq_conservative cpufreq_userspace cpufreq_stats pcmcia arc4 iTCO_wdt iTCO_vendor_support coretemp kvm_intel iwl3945 kvm iwlegacy mac80211 psmouse evdev cfg80211 yenta_socket i915 lpc_ich serio_raw pcmcia_rsrc pcmcia_core i2c_i801 nsc_ircc rng_core snd_hda_codec_analog snd_hda_codec_generic thinkpad_acpi irda snd_hda_intel 8250_fintek drm_kms_helper battery snd_hda_codec nvram crc_ccitt rfkill snd_hda_core ac drm snd_hwdep snd_pcm snd_timer i2c_algo_bit fb_sys_fops tpm_tis syscopyarea snd sysfillrect tpm video sysimgblt soundcore shpchp button acpi_cpufreq processor hwmon_vid fuse parport_pc ppdev lp parport autofs4 ext4 crc16 mbcache jbd2 ecb jitterentropy_rng sha256_generic hmac drbg ansi_cprng cbc algif_skcipher af_alg dm_crypt dm_mod sg sd_mod ata_generic sdhci_pci sdhci mmc_core ahci libahci ata_piix firewire_ohci firewire_core crc_itu_t libata scsi_mod ehci_pci e1000e ptp pps_core thermal uhci_hcd ehci_hcd usbcore usb_common ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03) Subsystem: Lenovo ThinkPad R60/T60/X60 series [17aa:2017] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller [8086:27a2] (rev 03) (prog-if 00 [VGA controller]) Subsystem: Lenovo ThinkPad R60/T60/X60 series [17aa:201a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at ee100000 (32-bit, non-prefetchable) [size=512K] Region 1: I/O ports at 1800 [size=8] Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M] Region 3: Memory at ee200000 (32-bit, non-prefetchable) [size=256K] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03) Subsystem: Lenovo ThinkPad R60/T60/X60 series [17aa:201a] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Region 0: Memory at ee180000 (32-bit, non-prefetchable) [size=512K] Capabilities: <access denied> 00:1b.0 Audio device [0403]: Intel Corporation NM10/ICH7 Family High Definition Audio Controller [8086:27d8] (rev 02) Subsystem: Lenovo ThinkPad R60/T60/X60 series [17aa:2010] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 30 Region 0: Memory at ee240000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: ee000000-ee0fffff Prefetchable memory behind bridge: 0000000080000000-00000000801fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 00003000-00004fff Memory behind bridge: ec000000-edffffff Prefetchable memory behind bridge: 00000000e4000000-00000000e40fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.2 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 3 [8086:27d4] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=04, subordinate=0b, sec-latency=0 I/O behind bridge: 00005000-00006fff Memory behind bridge: e8000000-e9ffffff Prefetchable memory behind bridge: 00000000e4100000-00000000e41fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.3 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 4 [8086:27d6] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0c, subordinate=13, sec-latency=0 I/O behind bridge: 00007000-00008fff Memory behind bridge: ea000000-ebffffff Prefetchable memory behind bridge: 00000000e4200000-00000000e42fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI]) Subsystem: Lenovo ThinkPad R60/T60/X60 series [17aa:200a] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at 1820 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI]) Subsystem: Lenovo ThinkPad R60/T60/X60 series [17aa:200a] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 17 Region 4: I/O ports at 1840 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI]) Subsystem: Lenovo ThinkPad R60/T60/X60 series [17aa:200a] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at 1860 [size=32] Kernel driver in use: uhci_hcd 00:1d.3 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI]) Subsystem: Lenovo ThinkPad R60/T60/X60 series [17aa:200a] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 19 Region 4: I/O ports at 1880 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI]) Subsystem: Lenovo ThinkPad R60/T60/X60 series [17aa:200b] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 19 Region 0: Memory at ee444000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=15, subordinate=18, sec-latency=32 I/O behind bridge: 00009000-0000cfff Memory behind bridge: e4300000-e7ffffff Prefetchable memory behind bridge: 00000000e0000000-00000000e3ffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02) Subsystem: Lenovo ThinkPad R60/T60/X60 series [17aa:2009] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: lpc_ich 00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 02) (prog-if 8a [Master SecP PriP]) Subsystem: Lenovo ThinkPad R60/T60/X60 series [17aa:200c] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ Latency: 0 Interrupt: pin C routed to IRQ 16 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 Region 4: I/O ports at 1810 [size=16] Kernel driver in use: ata_piix 00:1f.2 SATA controller [0106]: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [AHCI mode] [8086:27c5] (rev 02) (prog-if 01 [AHCI 1.0]) Subsystem: Lenovo ThinkPad R60/T60/X60 series [17aa:200d] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 29 Region 0: I/O ports at 18d0 [size=8] Region 1: I/O ports at 18c4 [size=4] Region 2: I/O ports at 18c8 [size=8] Region 3: I/O ports at 18c0 [size=4] Region 4: I/O ports at 18b0 [size=16] Region 5: Memory at ee444400 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus [0c05]: Intel Corporation NM10/ICH7 Family SMBus Controller [8086:27da] (rev 02) Subsystem: Lenovo ThinkPad R60/T60/X60 series [17aa:200f] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at 18e0 [size=32] Kernel driver in use: i801_smbus 02:00.0 Ethernet controller [0200]: Intel Corporation 82573L Gigabit Ethernet Controller [8086:109a] Subsystem: Lenovo ThinkPad X60/X60s [17aa:207e] Physical Slot: 2 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 28 Region 0: Memory at ee000000 (32-bit, non-prefetchable) [disabled] [size=128K] Region 2: I/O ports at 2000 [disabled] [size=32] Capabilities: <access denied> Kernel driver in use: e1000e 03:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4227] (rev 02) Subsystem: Intel Corporation Device [8086:1010] Physical Slot: 3 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 31 Region 0: Memory at edf00000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: iwl3945 15:00.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev b4) Subsystem: Lenovo ThinkPad X60/X60s [17aa:201c] Physical Slot: 1 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 168 Interrupt: pin A routed to IRQ 16 Region 0: Memory at e4300000 (32-bit, non-prefetchable) [size=4K] Bus: primary=15, secondary=16, subordinate=17, sec-latency=176 Memory window 0: e0000000-e3ffffff (prefetchable) Memory window 1: f4000000-f7ffffff I/O window 0: 00009000-000090ff I/O window 1: 00009400-000094ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 Capabilities: <access denied> Kernel driver in use: yenta_cardbus 15:00.1 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C552 IEEE 1394 Controller [1180:0552] (rev 09) (prog-if 10 [OHCI]) Subsystem: Lenovo ThinkPad X60/X60s [17aa:201e] Physical Slot: 1 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (500ns min, 1000ns max) Interrupt: pin B routed to IRQ 17 Region 0: Memory at e4301000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: firewire_ohci 15:00.2 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 18) Subsystem: Lenovo ThinkPad X60/X60s [17aa:201d] Physical Slot: 1 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin C routed to IRQ 18 Region 0: Memory at e4301800 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: sdhci-pci ** USB devices: Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub -- System Information: Debian Release: 8.2 APT prefers proposed-updates APT policy: (500, 'proposed-updates'), (500, 'stable') Architecture: i386 (i686) Kernel: Linux 4.3.0-trunk-686 (SMP w/2 CPU cores) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages linux-image-4.3.0-trunk-686 depends on: ii debconf [debconf-2.0] 1.5.56 ii initramfs-tools [linux-initramfs-tool] 0.120 ii kmod 18-3 ii linux-base 3.5 Versions of packages linux-image-4.3.0-trunk-686 recommends: ii firmware-linux-free 3.3 ii irqbalance 1.0.6-3 ii libc6-i686 2.19-18+deb8u1 Versions of packages linux-image-4.3.0-trunk-686 suggests: pn debian-kernel-handbook <none> ii grub-pc 2.02~beta2-22 pn linux-doc-4.3 <none> Versions of packages linux-image-4.3.0-trunk-686 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> ii firmware-iwlwifi 0.43 pn firmware-libertas <none> ii firmware-linux 0.43 ii firmware-linux-nonfree 0.43 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> ii firmware-ralink 0.43 ii firmware-realtek 0.43 pn xen-hypervisor <none> -- debconf information excluded -- go~mus | Besuchermanagement ▶ 18. – 20. November 2015 // Messe Köln – Stand D054 Besuchen Sie uns auf der EXPONATEC und lernen Sie die Software für Besuchermanagement kennen, die von führenden Museumsverbänden in Europa eingesetzt wird. Mehr Infos über go~mus finden Sie unter https://www.gomus.de ~ GPG-Schlüssel: 33623E9B Fingerabdruck = 0EB1 649D 4361 D04F 3C70 6F71 4DD7 BF75 3362 3E9B Giant Monkey Software Engineering GmbH Brunnenstr. 7D 10119 Berlin Mitte Geschäftsführer Adrian Fuhrmann, Lion Vollnhals und Paul Menzel USt-IdNr.: DE281524720 HRB 139495 B Amtsgericht Charlottenburg[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.3.0-trunk-686 (debian-kernel@lists.debian.org) (gcc version 5.2.1 20151028 (Debian 5.2.1-23) ) #1 SMP Debian 4.3-1~exp1 (2015-11-04) [ 0.000000] Disabled fast string operations [ 0.000000] x86/fpu: Legacy x87 FPU detected. [ 0.000000] x86/fpu: Using 'lazy' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f6cffff] usable [ 0.000000] BIOS-e820: [mem 0x000000007f6d0000-0x000000007f6defff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007f6df000-0x000000007f6fffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007f700000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: LENOVO 636338U/636338U, BIOS 7JET23WW (1.08 ) 04/18/2007 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x7f6d0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DBFFF uncachable [ 0.000000] DC000-DFFFF write-back [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 07F700000 mask FFFF00000 uncachable [ 0.000000] 2 base 07F800000 mask FFF800000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86/PAT: PAT not supported by CPU. [ 0.000000] found SMP MP-table at [mem 0x000f67f0-0x000f67ff] mapped at [c00f67f0] [ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff] [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x37000000-0x373fffff] [ 0.000000] [mem 0x37000000-0x373fffff] page 4M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x36ffffff] [ 0.000000] [mem 0x00100000-0x003fffff] page 4k [ 0.000000] [mem 0x00400000-0x36ffffff] page 4M [ 0.000000] init_memory_mapping: [mem 0x37400000-0x377fdfff] [ 0.000000] [mem 0x37400000-0x377fdfff] page 4k [ 0.000000] BRK [0x01817000, 0x01817fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x35f4e000-0x36f9efff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F67B0 000024 (v02 LENOVO) [ 0.000000] ACPI: XSDT 0x000000007F6D1296 00008C (v01 LENOVO TP-7J 00001080 LTP 00000000) [ 0.000000] ACPI: FACP 0x000000007F6D1400 0000F4 (v03 LENOVO TP-7J 00001080 LNVO 00000001) [ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20150818/tbfadt-623) [ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe1Block: 0/32 (20150818/tbfadt-623) [ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Gpe1Block has zero address or length: 0x000000000000102C/0x0 (20150818/tbfadt-654) [ 0.000000] ACPI: DSDT 0x000000007F6D1790 00D4C1 (v01 LENOVO TP-7J 00001080 MSFT 0100000E) [ 0.000000] ACPI: FACS 0x000000007F6F4000 000040 [ 0.000000] ACPI: FACS 0x000000007F6F4000 000040 [ 0.000000] ACPI: SSDT 0x000000007F6D15B4 0001DC (v01 LENOVO TP-7J 00001080 MSFT 0100000E) [ 0.000000] ACPI: ECDT 0x000000007F6DEC51 000052 (v01 LENOVO TP-7J 00001080 LNVO 00000001) [ 0.000000] ACPI: TCPA 0x000000007F6DECA3 000032 (v02 LENOVO TP-7J 00001080 LNVO 00000001) [ 0.000000] ACPI: APIC 0x000000007F6DECD5 000068 (v01 LENOVO TP-7J 00001080 LNVO 00000001) [ 0.000000] ACPI: MCFG 0x000000007F6DED3D 00003C (v01 LENOVO TP-7J 00001080 LNVO 00000001) [ 0.000000] ACPI: HPET 0x000000007F6DED79 000038 (v01 LENOVO TP-7J 00001080 LNVO 00000001) [ 0.000000] ACPI: SLIC 0x000000007F6DEE62 000176 (v01 LENOVO TP-7J 00001080 LTP 00000000) [ 0.000000] ACPI: BOOT 0x000000007F6DEFD8 000028 (v01 LENOVO TP-7J 00001080 LTP 00000001) [ 0.000000] ACPI: SSDT 0x000000007F6F2645 00025F (v01 LENOVO TP-7J 00001080 INTL 20050513) [ 0.000000] ACPI: SSDT 0x000000007F6F28A4 0000A6 (v01 LENOVO TP-7J 00001080 INTL 20050513) [ 0.000000] ACPI: SSDT 0x000000007F6F294A 0004F7 (v01 LENOVO TP-7J 00001080 INTL 20050513) [ 0.000000] ACPI: SSDT 0x000000007F6F2E41 0001D8 (v01 LENOVO TP-7J 00001080 INTL 20050513) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1150MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] Normal [mem 0x0000000001000000-0x00000000377fdfff] [ 0.000000] HighMem [mem 0x00000000377fe000-0x000000007f6cffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000007f6cffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007f6cffff] [ 0.000000] On node 0 totalpages: 521838 [ 0.000000] free_area_init_node: node 0, pgdat c16dd800, node_mem_map f4d60024 [ 0.000000] DMA zone: 36 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] Normal zone: 1962 pages used for memmap [ 0.000000] Normal zone: 223230 pages, LIFO batch:31 [ 0.000000] HighMem zone: 294610 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] Reserving Intel graphics stolen memory at 0x7f800000-0x7fffffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000d1fff] [ 0.000000] PM: Registered nosave memory: [mem 0x000d2000-0x000d3fff] [ 0.000000] PM: Registered nosave memory: [mem 0x000d4000-0x000dbfff] [ 0.000000] PM: Registered nosave memory: [mem 0x000dc000-0x000fffff] [ 0.000000] e820: [mem 0x80000000-0xefffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 17 pages/cpu @f77d0000 s39884 r0 d29748 u69632 [ 0.000000] pcpu-alloc: s39884 r0 d29748 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519840 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.3.0-trunk-686 root=UUID=0198e82a-32df-4f18-bec0-3e08802b084d ro quiet noisapnp pcie_aspm=force pcie_aspm.policy=powersave nmi_watchdog=0 [ 0.000000] PCIe ASPM is forcibly enabled [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000377fe:0007f6d0) [ 0.000000] Initializing Movable for node 0 (00000000:00000000) [ 0.000000] Memory: 2042936K/2087352K available (5013K kernel code, 585K rwdata, 1504K rodata, 644K init, 472K bss, 44416K reserved, 0K cma-reserved, 1178440K highmem) [ 0.000000] virtual kernel memory layout: fixmap : 0xffd36000 - 0xfffff000 (2852 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc16f3000 - 0xc1794000 ( 644 kB) .data : 0xc14e5ae3 - 0xc16f14c0 (2094 kB) .text : 0xc1000000 - 0xc14e5ae3 (5014 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2 [ 0.000000] NR_IRQS:2304 nr_irqs:440 16 [ 0.000000] CPU 0 irqstacks, hard=f702c000 soft=f702e000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1662.514 MHz processor [ 0.004011] Calibrating delay loop (skipped), value calculated using timer frequency.. 3325.02 BogoMIPS (lpj=6650056) [ 0.004016] pid_max: default: 32768 minimum: 301 [ 0.004029] ACPI: Core revision 20150818 [ 0.027703] ACPI: 6 ACPI AML tables successfully acquired and loaded [ 0.027738] Security Framework initialized [ 0.027742] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.027753] AppArmor: AppArmor disabled by boot time parameter [ 0.027771] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.027774] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.028106] Initializing cgroup subsys io [ 0.028115] Initializing cgroup subsys memory [ 0.028122] Initializing cgroup subsys devices [ 0.028128] Initializing cgroup subsys freezer [ 0.028133] Initializing cgroup subsys net_cls [ 0.028138] Initializing cgroup subsys perf_event [ 0.028141] Initializing cgroup subsys net_prio [ 0.028167] Disabled fast string operations [ 0.028171] CPU: Physical Processor ID: 0 [ 0.028173] CPU: Processor Core ID: 0 [ 0.028180] mce: CPU supports 6 MCE banks [ 0.028193] CPU0: Thermal monitoring enabled (TM2) [ 0.028197] process: using mwait in idle threads [ 0.028206] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2 [ 0.028209] Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8, 1GB 0 [ 0.028473] Freeing SMP alternatives memory: 20K (c1794000 - c1799000) [ 0.032011] ftrace: allocating 21915 entries in 43 pages [ 0.044015] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.044497] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.088000] smpboot: CPU0: Intel(R) Core(TM) Duo CPU L2400 @ 1.66GHz (family: 0x6, model: 0xe, stepping: 0xc) [ 0.088000] Performance Events: Core events, core PMU driver. [ 0.088000] ... version: 1 [ 0.088000] ... bit width: 40 [ 0.088000] ... generic registers: 2 [ 0.088000] ... value mask: 000000ffffffffff [ 0.088000] ... max period: 000000007fffffff [ 0.088000] ... fixed-purpose events: 0 [ 0.088000] ... event mask: 0000000000000003 [ 0.088000] CPU 1 irqstacks, hard=f7146000 soft=f7148000 [ 0.088000] x86: Booting SMP configuration: [ 0.088000] .... node #0, CPUs: #1 [ 0.008000] Initializing CPU#1 [ 0.008000] Disabled fast string operations [ 0.098012] TSC synchronization [CPU#0 -> CPU#1]: [ 0.098018] Measured 474390 cycles TSC warp between CPUs, turning off TSC clock. [ 0.098028] tsc: Marking TSC unstable due to check_tsc_sync_source failed [ 0.098124] x86: Booted up 1 node, 2 CPUs [ 0.098128] smpboot: Total of 2 processors activated (6650.05 BogoMIPS) [ 0.099725] devtmpfs: initialized [ 0.100091] PM: Registering ACPI NVS region [mem 0x7f6df000-0x7f6fffff] (135168 bytes) [ 0.100231] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.100290] pinctrl core: initialized pinctrl subsystem [ 0.100290] NET: Registered protocol family 16 [ 0.108007] cpuidle: using governor ladder [ 0.116006] cpuidle: using governor menu [ 0.116099] Simple Boot Flag at 0x35 set to 0x1 [ 0.116181] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.116184] ACPI: bus type PCI registered [ 0.116187] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.116304] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.116308] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 [ 0.116310] PCI: Using MMCONFIG for extended config space [ 0.116313] PCI: Using configuration type 1 for base access [ 0.128095] ACPI: Added _OSI(Module Device) [ 0.128095] ACPI: Added _OSI(Processor Device) [ 0.128095] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.128095] ACPI: Added _OSI(Processor Aggregator Device) [ 0.133193] ACPI : EC: EC description table is found, configuring boot EC [ 0.133211] ACPI : EC: EC started [ 0.144543] ACPI: Dynamic OEM Table Load: [ 0.144554] ACPI: SSDT 0x00000000F71A6000 000240 (v01 PmRef Cpu0Ist 00000100 INTL 20050513) [ 0.145441] ACPI: Dynamic OEM Table Load: [ 0.145452] ACPI: SSDT 0x00000000F71B4800 0006B4 (v01 PmRef Cpu0Cst 00000100 INTL 20050513) [ 0.146637] ACPI: Dynamic OEM Table Load: [ 0.146645] ACPI: SSDT 0x00000000F710C100 0000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513) [ 0.147414] ACPI: Dynamic OEM Table Load: [ 0.147422] ACPI: SSDT 0x00000000F7126700 000085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513) [ 0.148739] ACPI: Interpreter enabled [ 0.148753] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150818/hwxface-580) [ 0.148759] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150818/hwxface-580) [ 0.148780] ACPI: (supports S0 S3 S4 S5) [ 0.148783] ACPI: Using IOAPIC for interrupt routing [ 0.148822] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.153164] ACPI: Power Resource [PUBS] (on) [ 0.153164] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1) [ 0.157897] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 2) [ 0.160879] acpi IBM0079:00: ACPI dock station (docks/bays count: 3) [ 0.161431] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 0.161601] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 0.161767] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 0.161933] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 0.162098] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 0.162264] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) [ 0.162429] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) [ 0.162594] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [ 0.162778] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.162786] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.163478] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.164007] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.164036] acpi PNP0A08:00: host bridge window [io 0x0000-0x0cf7 window] (ignored) [ 0.164040] acpi PNP0A08:00: host bridge window [io 0x0d00-0xffff window] (ignored) [ 0.164044] acpi PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff window] (ignored) [ 0.164048] acpi PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff window] (ignored) [ 0.164051] acpi PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff window] (ignored) [ 0.164055] acpi PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff window] (ignored) [ 0.164058] acpi PNP0A08:00: host bridge window [mem 0xfed40000-0xfed40fff window] (ignored) [ 0.164061] PCI: root bus 00: using default resources [ 0.164066] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.164337] PCI host bridge to bus 0000:00 [ 0.164342] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.164346] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.164350] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff] [ 0.164363] pci 0000:00:00.0: [8086:27a0] type 00 class 0x060000 [ 0.164522] pci 0000:00:02.0: [8086:27a2] type 00 class 0x030000 [ 0.164541] pci 0000:00:02.0: reg 0x10: [mem 0xee100000-0xee17ffff] [ 0.164549] pci 0000:00:02.0: reg 0x14: [io 0x1800-0x1807] [ 0.164557] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref] [ 0.164565] pci 0000:00:02.0: reg 0x1c: [mem 0xee200000-0xee23ffff] [ 0.164714] pci 0000:00:02.1: [8086:27a6] type 00 class 0x038000 [ 0.164729] pci 0000:00:02.1: reg 0x10: [mem 0xee180000-0xee1fffff] [ 0.164931] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300 [ 0.164974] pci 0000:00:1b.0: reg 0x10: [mem 0xee240000-0xee243fff 64bit] [ 0.165067] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.165147] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.165237] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400 [ 0.165347] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.165418] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.165508] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400 [ 0.165617] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.165689] pci 0000:00:1c.1: System wakeup disabled by ACPI [ 0.165779] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400 [ 0.165887] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.165959] pci 0000:00:1c.2: System wakeup disabled by ACPI [ 0.166049] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400 [ 0.166157] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.166228] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 0.166317] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300 [ 0.166378] pci 0000:00:1d.0: reg 0x20: [io 0x1820-0x183f] [ 0.166577] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.166577] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300 [ 0.166577] pci 0000:00:1d.1: reg 0x20: [io 0x1840-0x185f] [ 0.166577] pci 0000:00:1d.1: System wakeup disabled by ACPI [ 0.166577] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300 [ 0.166577] pci 0000:00:1d.2: reg 0x20: [io 0x1860-0x187f] [ 0.166577] pci 0000:00:1d.2: System wakeup disabled by ACPI [ 0.166577] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300 [ 0.166577] pci 0000:00:1d.3: reg 0x20: [io 0x1880-0x189f] [ 0.166577] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320 [ 0.166577] pci 0000:00:1d.7: reg 0x10: [mem 0xee444000-0xee4443ff] [ 0.166577] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.168069] pci 0000:00:1d.7: System wakeup disabled by ACPI [ 0.168161] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 [ 0.168292] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 0.168383] pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100 [ 0.168513] pci 0000:00:1f.0: can't claim BAR 13 [io 0x1000-0x107f]: address conflict with ACPI CPU throttle [io 0x1010-0x1015] [ 0.168521] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO [ 0.168527] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f) [ 0.168532] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f) [ 0.168537] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f) [ 0.168686] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a [ 0.168709] pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007] [ 0.168722] pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003] [ 0.168735] pci 0000:00:1f.1: reg 0x18: [io 0x0000-0x0007] [ 0.168749] pci 0000:00:1f.1: reg 0x1c: [io 0x0000-0x0003] [ 0.168762] pci 0000:00:1f.1: reg 0x20: [io 0x1810-0x181f] [ 0.168789] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.168793] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.168796] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.168799] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.168934] pci 0000:00:1f.2: [8086:27c5] type 00 class 0x010601 [ 0.168970] pci 0000:00:1f.2: reg 0x10: [io 0x18d0-0x18d7] [ 0.168984] pci 0000:00:1f.2: reg 0x14: [io 0x18c4-0x18c7] [ 0.168997] pci 0000:00:1f.2: reg 0x18: [io 0x18c8-0x18cf] [ 0.169010] pci 0000:00:1f.2: reg 0x1c: [io 0x18c0-0x18c3] [ 0.169024] pci 0000:00:1f.2: reg 0x20: [io 0x18b0-0x18bf] [ 0.169037] pci 0000:00:1f.2: reg 0x24: [mem 0xee444400-0xee4447ff] [ 0.169077] pci 0000:00:1f.2: PME# supported from D3hot [ 0.169223] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500 [ 0.169303] pci 0000:00:1f.3: reg 0x20: [io 0x18e0-0x18ff] [ 0.169632] pci 0000:02:00.0: [8086:109a] type 00 class 0x020000 [ 0.169702] pci 0000:02:00.0: reg 0x10: [mem 0xee000000-0xee01ffff] [ 0.169745] pci 0000:02:00.0: reg 0x18: [io 0x2000-0x201f] [ 0.169901] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.176091] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.176098] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.176104] pci 0000:00:1c.0: bridge window [mem 0xee000000-0xee0fffff] [ 0.176287] pci 0000:03:00.0: [8086:4227] type 00 class 0x028000 [ 0.176415] pci 0000:03:00.0: reg 0x10: [mem 0xedf00000-0xedf00fff] [ 0.176774] pci 0000:03:00.0: PME# supported from D0 D3hot [ 0.184080] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.184087] pci 0000:00:1c.1: bridge window [io 0x3000-0x4fff] [ 0.184093] pci 0000:00:1c.1: bridge window [mem 0xec000000-0xedffffff] [ 0.184103] pci 0000:00:1c.1: bridge window [mem 0xe4000000-0xe40fffff 64bit pref] [ 0.184214] pci 0000:00:1c.2: PCI bridge to [bus 04-0b] [ 0.184220] pci 0000:00:1c.2: bridge window [io 0x5000-0x6fff] [ 0.184227] pci 0000:00:1c.2: bridge window [mem 0xe8000000-0xe9ffffff] [ 0.184236] pci 0000:00:1c.2: bridge window [mem 0xe4100000-0xe41fffff 64bit pref] [ 0.184333] pci 0000:00:1c.3: PCI bridge to [bus 0c-13] [ 0.184340] pci 0000:00:1c.3: bridge window [io 0x7000-0x8fff] [ 0.184346] pci 0000:00:1c.3: bridge window [mem 0xea000000-0xebffffff] [ 0.184356] pci 0000:00:1c.3: bridge window [mem 0xe4200000-0xe42fffff 64bit pref] [ 0.184461] pci 0000:15:00.0: [1180:0476] type 02 class 0x060700 [ 0.184502] pci 0000:15:00.0: reg 0x10: [mem 0xe4300000-0xe4300fff] [ 0.184535] pci 0000:15:00.0: supports D1 D2 [ 0.184539] pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.184653] pci 0000:15:00.1: [1180:0552] type 00 class 0x0c0010 [ 0.184692] pci 0000:15:00.1: reg 0x10: [mem 0xe4301000-0xe43017ff] [ 0.184803] pci 0000:15:00.1: PME# supported from D0 D3hot D3cold [ 0.184909] pci 0000:15:00.2: [1180:0822] type 00 class 0x080500 [ 0.184947] pci 0000:15:00.2: reg 0x10: [mem 0xe4301800-0xe43018ff] [ 0.185058] pci 0000:15:00.2: supports D1 D2 [ 0.185061] pci 0000:15:00.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.185223] pci 0000:00:1e.0: PCI bridge to [bus 15-18] (subtractive decode) [ 0.185230] pci 0000:00:1e.0: bridge window [io 0x9000-0xcfff] [ 0.185236] pci 0000:00:1e.0: bridge window [mem 0xe4300000-0xe7ffffff] [ 0.185245] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xe3ffffff 64bit pref] [ 0.185249] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.185253] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode) [ 0.185333] pci_bus 0000:16: busn_res: can not insert [bus 16-ff] under [bus 15-18] (conflicts with (null) [bus 15-18]) [ 0.185341] pci_bus 0000:16: busn_res: [bus 16-ff] end is updated to 17 [ 0.185385] pci_bus 0000:00: on NUMA node 0 [ 0.185954] ACPI: Enabled 2 GPEs in block 00 to 1F [ 0.185954] ACPI : EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 [ 0.185954] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.185954] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.185954] vgaarb: loaded [ 0.185954] vgaarb: bridge control possible 0000:00:02.0 [ 0.185954] PCI: Using ACPI for IRQ routing [ 0.190014] PCI: pci_cache_line_size set to 64 bytes [ 0.190311] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.190314] e820: reserve RAM buffer [mem 0x7f6d0000-0x7fffffff] [ 0.190633] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.190641] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.190648] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.192031] clocksource: Switched to clocksource hpet [ 0.203916] pnp: PnP ACPI init [ 0.204787] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.204793] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved [ 0.204797] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved [ 0.204801] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved [ 0.204805] system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved [ 0.204809] system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved [ 0.204812] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved [ 0.204816] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved [ 0.204820] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved [ 0.204824] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved [ 0.204828] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved [ 0.204832] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.204836] system 00:00: [mem 0x00100000-0x7fffffff] could not be reserved [ 0.204840] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved [ 0.204844] system 00:00: [mem 0xfed41000-0xffffffff] could not be reserved [ 0.204852] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.205050] system 00:01: [io 0x164e-0x164f] has been reserved [ 0.205055] system 00:01: [io 0x1000-0x107f] could not be reserved [ 0.205059] system 00:01: [io 0x1180-0x11bf] has been reserved [ 0.205063] system 00:01: [io 0x0800-0x080f] has been reserved [ 0.205067] system 00:01: [io 0x15e0-0x15ef] has been reserved [ 0.205071] system 00:01: [io 0x1600-0x165f] could not be reserved [ 0.205075] system 00:01: [mem 0xf0000000-0xf3ffffff] has been reserved [ 0.205079] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.205083] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved [ 0.205087] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.205091] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.205097] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.205206] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.205264] pnp 00:03: Plug and Play ACPI device, IDs LEN0003 PNP0303 (active) [ 0.205319] pnp 00:04: Plug and Play ACPI device, IDs IBM3780 PNP0f13 (active) [ 0.205546] pnp 00:05: Plug and Play ACPI device, IDs IBM0071 PNP0511 (disabled) [ 0.205764] pnp 00:06: Plug and Play ACPI device, IDs WACf004 (active) [ 0.205846] pnp 00:07: Plug and Play ACPI device, IDs ATM1200 PNP0c31 (active) [ 0.206720] pnp: PnP ACPI: found 8 devices [ 0.206730] PnPBIOS: Disabled by ACPI PNP [ 0.245725] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.245755] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 [ 0.245808] pci 0000:00:1f.0: BAR 13: [io size 0x0080] has bogus alignment [ 0.245814] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.245819] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.245827] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref] [ 0.245832] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.245837] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.245845] pci 0000:00:1c.0: bridge window [mem 0xee000000-0xee0fffff] [ 0.245851] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff 64bit pref] [ 0.245860] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.245865] pci 0000:00:1c.1: bridge window [io 0x3000-0x4fff] [ 0.245872] pci 0000:00:1c.1: bridge window [mem 0xec000000-0xedffffff] [ 0.245879] pci 0000:00:1c.1: bridge window [mem 0xe4000000-0xe40fffff 64bit pref] [ 0.245888] pci 0000:00:1c.2: PCI bridge to [bus 04-0b] [ 0.245893] pci 0000:00:1c.2: bridge window [io 0x5000-0x6fff] [ 0.245900] pci 0000:00:1c.2: bridge window [mem 0xe8000000-0xe9ffffff] [ 0.245907] pci 0000:00:1c.2: bridge window [mem 0xe4100000-0xe41fffff 64bit pref] [ 0.245916] pci 0000:00:1c.3: PCI bridge to [bus 0c-13] [ 0.245921] pci 0000:00:1c.3: bridge window [io 0x7000-0x8fff] [ 0.245928] pci 0000:00:1c.3: bridge window [mem 0xea000000-0xebffffff] [ 0.245935] pci 0000:00:1c.3: bridge window [mem 0xe4200000-0xe42fffff 64bit pref] [ 0.245947] pci 0000:15:00.0: res[15]=[mem 0x04000000-0x03ffffff pref] res_to_dev_res add_size 4000000 min_align 4000000 [ 0.245952] pci 0000:15:00.0: res[15]=[mem 0x04000000-0x07ffffff pref] res_to_dev_res add_size 4000000 min_align 4000000 [ 0.245956] pci 0000:15:00.0: res[16]=[mem 0x04000000-0x03ffffff] res_to_dev_res add_size 4000000 min_align 4000000 [ 0.245960] pci 0000:15:00.0: res[16]=[mem 0x04000000-0x07ffffff] res_to_dev_res add_size 4000000 min_align 4000000 [ 0.245964] pci 0000:15:00.0: res[13]=[io 0x0100-0x00ff] res_to_dev_res add_size 100 min_align 100 [ 0.245968] pci 0000:15:00.0: res[13]=[io 0x0100-0x01ff] res_to_dev_res add_size 100 min_align 100 [ 0.245972] pci 0000:15:00.0: res[14]=[io 0x0100-0x00ff] res_to_dev_res add_size 100 min_align 100 [ 0.245976] pci 0000:15:00.0: res[14]=[io 0x0100-0x01ff] res_to_dev_res add_size 100 min_align 100 [ 0.245981] pci 0000:15:00.0: BAR 15: assigned [mem 0xe0000000-0xe3ffffff pref] [ 0.245987] pci 0000:15:00.0: BAR 16: assigned [mem 0xf4000000-0xf7ffffff] [ 0.245991] pci 0000:15:00.0: BAR 13: assigned [io 0x9000-0x90ff] [ 0.245995] pci 0000:15:00.0: BAR 14: assigned [io 0x9400-0x94ff] [ 0.245999] pci 0000:15:00.0: CardBus bridge to [bus 16-17] [ 0.246002] pci 0000:15:00.0: bridge window [io 0x9000-0x90ff] [ 0.246009] pci 0000:15:00.0: bridge window [io 0x9400-0x94ff] [ 0.246017] pci 0000:15:00.0: bridge window [mem 0xe0000000-0xe3ffffff pref] [ 0.246024] pci 0000:15:00.0: bridge window [mem 0xf4000000-0xf7ffffff] [ 0.246031] pci 0000:00:1e.0: PCI bridge to [bus 15-18] [ 0.246035] pci 0000:00:1e.0: bridge window [io 0x9000-0xcfff] [ 0.246043] pci 0000:00:1e.0: bridge window [mem 0xe4300000-0xe7ffffff] [ 0.246049] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xe3ffffff 64bit pref] [ 0.246059] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.246062] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff] [ 0.246066] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.246070] pci_bus 0000:02: resource 1 [mem 0xee000000-0xee0fffff] [ 0.246073] pci_bus 0000:02: resource 2 [mem 0x80000000-0x801fffff 64bit pref] [ 0.246077] pci_bus 0000:03: resource 0 [io 0x3000-0x4fff] [ 0.246081] pci_bus 0000:03: resource 1 [mem 0xec000000-0xedffffff] [ 0.246084] pci_bus 0000:03: resource 2 [mem 0xe4000000-0xe40fffff 64bit pref] [ 0.246088] pci_bus 0000:04: resource 0 [io 0x5000-0x6fff] [ 0.246091] pci_bus 0000:04: resource 1 [mem 0xe8000000-0xe9ffffff] [ 0.246095] pci_bus 0000:04: resource 2 [mem 0xe4100000-0xe41fffff 64bit pref] [ 0.246099] pci_bus 0000:0c: resource 0 [io 0x7000-0x8fff] [ 0.246102] pci_bus 0000:0c: resource 1 [mem 0xea000000-0xebffffff] [ 0.246106] pci_bus 0000:0c: resource 2 [mem 0xe4200000-0xe42fffff 64bit pref] [ 0.246110] pci_bus 0000:15: resource 0 [io 0x9000-0xcfff] [ 0.246113] pci_bus 0000:15: resource 1 [mem 0xe4300000-0xe7ffffff] [ 0.246117] pci_bus 0000:15: resource 2 [mem 0xe0000000-0xe3ffffff 64bit pref] [ 0.246120] pci_bus 0000:15: resource 4 [io 0x0000-0xffff] [ 0.246124] pci_bus 0000:15: resource 5 [mem 0x00000000-0xffffffff] [ 0.246128] pci_bus 0000:16: resource 0 [io 0x9000-0x90ff] [ 0.246131] pci_bus 0000:16: resource 1 [io 0x9400-0x94ff] [ 0.246135] pci_bus 0000:16: resource 2 [mem 0xe0000000-0xe3ffffff pref] [ 0.246138] pci_bus 0000:16: resource 3 [mem 0xf4000000-0xf7ffffff] [ 0.246205] NET: Registered protocol family 2 [ 0.246475] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.246506] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.246556] TCP: Hash tables configured (established 8192 bind 8192) [ 0.246594] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.246606] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.246686] NET: Registered protocol family 1 [ 0.246711] pci 0000:00:02.0: Video device with shadowed ROM [ 0.247018] PCI: CLS 64 bytes, default 64 [ 0.247095] Unpacking initramfs... [ 0.791875] Freeing initrd memory: 16708K (f5f4e000 - f6f9f000) [ 0.792079] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x17f6d38307d, max_idle_ns: 440795214506 ns [ 0.792231] microcode: CPU0 sig=0x6ec, pf=0x20, revision=0x54 [ 0.792243] microcode: CPU1 sig=0x6ec, pf=0x20, revision=0x54 [ 0.792356] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 0.792915] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.792972] audit: initializing netlink subsys (disabled) [ 0.793002] audit: type=2000 audit(1446974547.792:1): initialized [ 0.793437] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.793463] zbud: loaded [ 0.793559] VFS: Disk quotas dquot_6.6.0 [ 0.793588] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.794452] bounce: pool size: 64 pages [ 0.794478] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.794529] io scheduler noop registered [ 0.794533] io scheduler deadline registered [ 0.794551] io scheduler cfq registered (default) [ 0.796093] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 0.796097] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 0.796103] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 0.796140] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt [ 0.796144] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt [ 0.796150] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded [ 0.796186] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt [ 0.796192] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded [ 0.796228] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt [ 0.796234] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded [ 0.796247] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.796269] pciehp 0000:00:1c.0:pcie04: Slot #2 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+ [ 0.796316] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded [ 0.796333] pciehp 0000:00:1c.1:pcie04: Slot #3 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+ [ 0.796370] pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded [ 0.796387] pciehp 0000:00:1c.2:pcie04: Slot #4 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+ [ 0.796423] pciehp 0000:00:1c.2:pcie04: service driver pciehp loaded [ 0.796440] pciehp 0000:00:1c.3:pcie04: Slot #5 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+ [ 0.796475] pciehp 0000:00:1c.3:pcie04: service driver pciehp loaded [ 0.796486] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.796523] intel_idle: does not run on family 6 model 14 [ 0.796569] GHES: HEST is not enabled! [ 0.796579] isapnp: ISA Plug & Play support disabled [ 0.796670] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.796901] 00:06: ttyS0 at I/O 0x200 (irq = 5, base_baud = 921600) is a NS16550A [ 0.797581] Linux agpgart interface v0.103 [ 0.797753] agpgart-intel 0000:00:00.0: Intel 945GM Chipset [ 0.797771] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable [ 0.798414] agpgart-intel 0000:00:00.0: detected 8192K stolen memory [ 0.798595] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 0.798775] Failed to find cpu0 device node [ 0.798829] Unable to detect cache hierarchy from DT for CPU 0 [ 0.798967] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 0.810203] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.810213] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.810484] mousedev: PS/2 mouse device common for all mice [ 0.810564] rtc_cmos 00:02: RTC can wake from S4 [ 0.810765] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.810800] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.810846] ledtrig-cpu: registered to indicate activity on CPUs [ 0.811814] NET: Registered protocol family 10 [ 0.812182] mip6: Mobile IPv6 [ 0.812189] NET: Registered protocol family 17 [ 0.812197] mpls_gso: MPLS GSO support [ 0.812524] Using IPI No-Shortcut mode [ 0.812797] registered taskstats version 1 [ 0.812835] zswap: loaded using pool lzo/zbud [ 0.813576] rtc_cmos 00:02: setting system clock to 2015-11-08 09:22:28 UTC (1446974548) [ 0.813710] PM: Hibernation image not present or could not be loaded. [ 0.814010] Freeing unused kernel memory: 644K (c16f3000 - c1794000) [ 0.814049] Write protecting the kernel text: 5016k [ 0.814096] Write protecting the kernel read-only data: 1508k [ 0.817149] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 0.877669] systemd-udevd[68]: starting version 215 [ 0.878179] random: systemd-udevd urandom read with 2 bits of entropy available [ 0.902698] ACPI: bus type USB registered [ 0.902757] usbcore: registered new interface driver usbfs [ 0.902783] usbcore: registered new interface driver hub [ 0.902970] usbcore: registered new device driver usb [ 0.903715] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.904847] uhci_hcd: USB Universal Host Controller Interface driver [ 0.905233] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.905297] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 0.905312] uhci_hcd 0000:00:1d.0: detected 2 ports [ 0.905354] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001820 [ 0.905444] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.905449] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.905453] usb usb1: Product: UHCI Host Controller [ 0.905456] usb usb1: Manufacturer: Linux 4.3.0-trunk-686 uhci_hcd [ 0.905459] usb usb1: SerialNumber: 0000:00:1d.0 [ 0.905716] hub 1-0:1.0: USB hub found [ 0.905728] hub 1-0:1.0: 2 ports detected [ 0.906026] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.906036] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 0.906045] uhci_hcd 0000:00:1d.1: detected 2 ports [ 0.906082] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001840 [ 0.906156] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.906160] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.906163] usb usb2: Product: UHCI Host Controller [ 0.906167] usb usb2: Manufacturer: Linux 4.3.0-trunk-686 uhci_hcd [ 0.906170] usb usb2: SerialNumber: 0000:00:1d.1 [ 0.906396] hub 2-0:1.0: USB hub found [ 0.906408] hub 2-0:1.0: 2 ports detected [ 0.906818] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.906829] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 0.906840] uhci_hcd 0000:00:1d.2: detected 2 ports [ 0.906876] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860 [ 0.906945] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.906949] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.906953] usb usb3: Product: UHCI Host Controller [ 0.906956] usb usb3: Manufacturer: Linux 4.3.0-trunk-686 uhci_hcd [ 0.906959] usb usb3: SerialNumber: 0000:00:1d.2 [ 0.907187] hub 3-0:1.0: USB hub found [ 0.907198] hub 3-0:1.0: 2 ports detected [ 0.907486] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 0.907496] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 0.907505] uhci_hcd 0000:00:1d.3: detected 2 ports [ 0.907539] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001880 [ 0.907609] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.907613] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.907616] usb usb4: Product: UHCI Host Controller [ 0.907619] usb usb4: Manufacturer: Linux 4.3.0-trunk-686 uhci_hcd [ 0.907622] usb usb4: SerialNumber: 0000:00:1d.3 [ 0.907845] hub 4-0:1.0: USB hub found [ 0.907856] hub 4-0:1.0: 2 ports detected [ 0.915647] pps_core: LinuxPPS API ver. 1 registered [ 0.915652] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.915943] PTP clock support registered [ 0.917424] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 0.917430] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.917608] e1000e 0000:02:00.0: Disabling ASPM L1 [ 0.917771] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 0.918898] ehci-pci: EHCI PCI platform driver [ 0.920107] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 0.920119] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 0.920138] ehci-pci 0000:00:1d.7: debug port 1 [ 0.922441] SCSI subsystem initialized [ 0.924066] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported [ 0.924515] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.924518] ACPI: Thermal Zone [THM0] (43 C) [ 0.926091] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.926095] ACPI: Thermal Zone [THM1] (45 C) [ 0.926380] ehci-pci 0000:00:1d.7: irq 19, io mem 0xee444000 [ 0.929071] pci 0000:00:1e.0: enabling device (0005 -> 0007) [ 0.929169] libata version 3.00 loaded. [ 0.931947] sdhci: Secure Digital Host Controller Interface driver [ 0.931951] sdhci: Copyright(c) Pierre Ossman [ 0.936136] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.936226] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.936230] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.936234] usb usb5: Product: EHCI Host Controller [ 0.936237] usb usb5: Manufacturer: Linux 4.3.0-trunk-686 ehci_hcd [ 0.936240] usb usb5: SerialNumber: 0000:00:1d.7 [ 0.936519] hub 5-0:1.0: USB hub found [ 0.936535] hub 5-0:1.0: 8 ports detected [ 0.960148] hub 1-0:1.0: USB hub found [ 0.960166] hub 1-0:1.0: 2 ports detected [ 0.984109] hub 2-0:1.0: USB hub found [ 0.984124] hub 2-0:1.0: 2 ports detected [ 0.992105] firewire_ohci 0000:15:00.1: added OHCI v1.0 device as card 0, 4 IR + 4 IT contexts, quirks 0x11 [ 0.992223] sdhci-pci 0000:15:00.2: SDHCI controller found [1180:0822] (rev 18) [ 0.993261] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. [ 0.993272] sdhci-pci 0000:15:00.2: No vmmc regulator found [ 0.993275] sdhci-pci 0000:15:00.2: No vqmmc regulator found [ 0.994275] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. [ 0.995463] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. [ 0.996473] mmc0: SDHCI controller on PCI [0000:15:00.2] using DMA [ 1.008121] hub 3-0:1.0: USB hub found [ 1.008136] hub 3-0:1.0: 2 ports detected [ 1.030903] e1000e 0000:02:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:16:d3:b8:e3:49 [ 1.030908] e1000e 0000:02:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.030987] e1000e 0000:02:00.0 eth0: MAC: 2, PHY: 2, PBA No: 005302-003 [ 1.032116] hub 4-0:1.0: USB hub found [ 1.032132] hub 4-0:1.0: 2 ports detected [ 1.032513] ata_piix 0000:00:1f.1: version 2.13 [ 1.034386] scsi host0: ata_piix [ 1.034819] scsi host1: ata_piix [ 1.034928] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14 [ 1.034932] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15 [ 1.035045] ahci 0000:00:1f.2: version 3.0 [ 1.035234] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode [ 1.035240] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part [ 1.036372] scsi host2: ahci [ 1.036541] scsi host3: ahci [ 1.036706] scsi host4: ahci [ 1.036856] ata2: port disabled--ignoring [ 1.036933] scsi host5: ahci [ 1.037056] ata3: SATA max UDMA/133 abar m1024@0xee444400 port 0xee444500 irq 29 [ 1.037059] ata4: DUMMY [ 1.037061] ata5: DUMMY [ 1.037063] ata6: DUMMY [ 1.356035] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.356451] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.356456] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.356460] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.356775] ata3.00: ATA-9: M4-CT256M4SSD2, 070H, max UDMA/100 [ 1.356779] ata3.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.357202] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.357206] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.357211] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.357521] ata3.00: configured for UDMA/100 [ 1.357769] scsi 2:0:0:0: Direct-Access ATA M4-CT256M4SSD2 070H PQ: 0 ANSI: 5 [ 1.363191] sd 2:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB) [ 1.363299] sd 2:0:0:0: [sda] Write Protect is off [ 1.363304] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.363339] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.363956] sda: sda1 sda2 [ 1.364541] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.365238] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.401480] device-mapper: uevent: version 1.0.3 [ 1.401727] device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com [ 1.492183] firewire_core 0000:15:00.1: created device fw0: GUID 000ae40700242004, S400 [ 7.280362] NET: Registered protocol family 38 [ 7.553018] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 7.865684] random: nonblocking pool is initialized [ 7.982910] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. [ 7.983001] systemd[1]: Found ordering cycle on basic.target/start [ 7.983007] systemd[1]: Found dependency on sysinit.target/start [ 7.983012] systemd[1]: Found dependency on rpcbind.service/start [ 7.983017] systemd[1]: Found dependency on network-online.target/start [ 7.983022] systemd[1]: Found dependency on network.target/start [ 7.983026] systemd[1]: Found dependency on systemd-networkd.service/start [ 7.983030] systemd[1]: Found dependency on dbus.service/start [ 7.983035] systemd[1]: Found dependency on basic.target/start [ 7.983039] systemd[1]: Breaking ordering cycle by deleting job rpcbind.service/start [ 7.983045] systemd[1]: Job rpcbind.service/start deleted to break ordering cycle starting with basic.target/start [ 8.570945] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. [ 8.674332] lp: driver loaded but no devices found [ 8.677495] ppdev: user-space parallel port driver [ 8.691817] fuse init (API version 7.23) [ 8.731173] systemd-udevd[258]: starting version 215 [ 8.957382] ACPI: acpi_idle registered with cpuidle [ 8.996628] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2 [ 8.997060] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 8.998551] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 9.002238] acpi device:01: registered as cooling_device0 [ 9.002380] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3 [ 9.003662] ACPI: Lid Switch [LID] [ 9.003771] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4 [ 9.003777] ACPI: Sleep Button [SLPB] [ 9.003898] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 [ 9.003902] ACPI: Power Button [PWRF] [ 9.033694] ACPI: AC Adapter [AC] (on-line) [ 9.036632] [drm] Initialized drm 1.1.0 20060810 [ 9.040684] Non-volatile memory driver v1.3 [ 9.044256] tpm_tis 00:07: 1.2 TPM (device-id 0x3202, rev-id 5) [ 9.055484] ACPI: Battery Slot [BAT0] (battery absent) [ 9.062865] snd_hda_intel 0000:00:1b.0: probe_mask set to 0x1 for device 17aa:2010 [ 9.074066] NET: Registered protocol family 23 [ 9.091877] thinkpad_acpi: ThinkPad ACPI Extras v0.25 [ 9.091883] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 9.091885] thinkpad_acpi: ThinkPad BIOS 7JET23WW (1.08 ), EC 7JHT12WW-1.03 [ 9.091888] thinkpad_acpi: Lenovo ThinkPad X60 Tablet, model 636338U [ 9.091891] thinkpad_acpi: WARNING: Outdated ThinkPad BIOS/EC firmware [ 9.091893] thinkpad_acpi: WARNING: This firmware may be missing critical bug fixes and/or important features [ 9.099676] thinkpad_acpi: detected a 8-level brightness capable ThinkPad [ 9.100518] thinkpad_acpi: ACPI backlight control delay disabled [ 9.100672] thinkpad_acpi: radio switch found; radios are enabled [ 9.100805] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode [ 9.100835] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver [ 9.100837] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... [ 9.105368] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one [ 9.105506] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) [ 9.117167] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6 [ 9.125105] snd_hda_codec_analog hdaudioC0D0: autoconfig for AD1981: line_outs=1 (0x5/0x0/0x0/0x0/0x0) type:speaker [ 9.125112] snd_hda_codec_analog hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 9.125117] snd_hda_codec_analog hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 9.125120] snd_hda_codec_analog hdaudioC0D0: mono: mono_out=0x0 [ 9.125123] snd_hda_codec_analog hdaudioC0D0: inputs: [ 9.125127] snd_hda_codec_analog hdaudioC0D0: Mic=0x8 [ 9.125131] snd_hda_codec_analog hdaudioC0D0: CD=0x19 [ 9.131560] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 9.151052] intel_rng: FWH not detected [ 10.033549] e1000e 0000:02:00.0 eth8: renamed from eth0 [ 10.039968] yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:201c] [ 10.048298] systemd-udevd[290]: renamed network interface eth0 to eth8 [ 10.061199] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 10.061400] ACPI Warning: SystemIO range 0x0000000000001028-0x000000000000102F conflicts with OpRegion 0x0000000000001000-0x000000000000107F (\_SB_.PCI0.LPC_.PMIO) (20150818/utaddress-254) [ 10.061410] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 10.061416] ACPI Warning: SystemIO range 0x00000000000011B0-0x00000000000011BF conflicts with OpRegion 0x0000000000001180-0x00000000000011BF (\_SB_.PCI0.LPC_.LPIO) (20150818/utaddress-254) [ 10.061423] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 10.061425] ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011AF conflicts with OpRegion 0x0000000000001180-0x00000000000011BF (\_SB_.PCI0.LPC_.LPIO) (20150818/utaddress-254) [ 10.061432] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 10.061434] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 10.075030] [drm] Memory usable by graphics device = 256M [ 10.075047] [drm] Replacing VGA console driver [ 10.078613] Console: switching to colour dummy device 80x25 [ 10.080692] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 10.080698] [drm] Driver supports precise vblank timestamp query. [ 10.080813] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 10.085874] leds_ss4200: no LED devices found [ 10.150685] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s [ 10.150691] iwl3945: Copyright(c) 2003-2011 Intel Corporation [ 10.181170] yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cb8, PCI irq 16 [ 10.181182] yenta_cardbus 0000:15:00.0: Socket status: 30000006 [ 10.181190] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [io 0x9000-0xcfff] [ 10.181195] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x9000-0xcfff: [ 10.184228] excluding 0x9000-0x90ff [ 10.188843] [drm] initialized overlay support [ 10.188917] [drm] Initialized i915 1.6.0 20150731 for 0000:00:02.0 on minor 0 [ 10.189321] 0x9400-0x94ff [ 10.221621] fbcon: inteldrmfb (fb0) is primary device [ 10.247233] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,discard [ 10.261071] iwl3945 0000:03:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels [ 10.261074] iwl3945 0000:03:00.0: Detected Intel Wireless WiFi Link 3945ABG [ 10.279795] iTCO_vendor_support: vendor-support=0 [ 10.283708] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 10.283774] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060) [ 10.283940] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 10.296037] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xe4300000-0xe7ffffff] [ 10.296041] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe4300000-0xe7ffffff: [ 10.296044] excluding [ 10.296045] 0xe4300000-0xe46cffff [ 10.296057] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xe0000000-0xe3ffffff 64bit pref] [ 10.296060] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe0000000-0xe3ffffff: [ 10.296067] excluding [ 10.296068] 0xe0000000-0xe3ffffff [ 10.304192] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs' [ 10.320165] tpm_tis 00:07: TPM is disabled/deactivated (0x6) [ 10.321242] nsc-ircc 00:05: [io 0x02f8-0x02ff] [ 10.321323] nsc-ircc 00:05: [irq 3] [ 10.321327] nsc-ircc 00:05: [dma 1] [ 10.321808] nsc-ircc 00:05: activated [ 10.321850] nsc-ircc, chip->init [ 10.321863] nsc-ircc, Found chip at base=0x164e [ 10.321903] nsc-ircc, driver loaded (Dag Brattli) [ 10.322211] IrDA: Registered device irda0 [ 10.322213] nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500 [ 10.324706] iwl3945 0000:03:00.0 wlan4: renamed from wlan0 [ 10.344293] systemd-udevd[297]: renamed network interface wlan0 to wlan4 [ 10.398183] cfg80211: World regulatory domain updated: [ 10.398186] cfg80211: DFS Master region: unset [ 10.398187] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 10.398190] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 10.398192] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 10.398194] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 10.398196] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 10.398199] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 10.398201] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 10.398203] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 10.398205] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 10.625567] psmouse serio1: hgpk: ID: 10 00 64 [ 10.776561] Console: switching [ 10.776565] to colour frame buffer device 128x48 [ 10.784739] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 10.908123] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: discard [ 10.979694] systemd-journald[246]: Received request to flush runtime journal from PID 1 [ 10.990479] psmouse serio1: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 11.008372] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input8 [ 12.084824] IPv6: ADDRCONF(NETDEV_UP): eth8: link is not ready [ 33.080358] iwl3945 0000:03:00.0: firmware: direct-loading firmware iwlwifi-3945-2.ucode [ 33.080371] iwl3945 0000:03:00.0: loaded firmware version 15.32.2.9 [ 33.153739] IPv6: ADDRCONF(NETDEV_UP): wlan4: link is not ready [ 35.297374] wlan4: authenticate with 34:31:c4:bd:c8:98 [ 35.300621] wlan4: direct probe to 34:31:c4:bd:c8:98 (try 1/3) [ 35.504102] wlan4: send auth to 34:31:c4:bd:c8:98 (try 2/3) [ 35.514420] wlan4: authenticated [ 35.516197] wlan4: associate with 34:31:c4:bd:c8:98 (try 1/3) [ 35.579702] wlan4: RX AssocResp from 34:31:c4:bd:c8:98 (capab=0x411 status=0 aid=1) [ 35.581394] wlan4: associated [ 35.581439] IPv6: ADDRCONF(NETDEV_CHANGE): wlan4: link becomes ready [ 35.588451] cfg80211: Regulatory domain changed to country: DE [ 35.588458] cfg80211: DFS Master region: ETSI [ 35.588461] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 35.588467] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 35.588472] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 35.588477] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 35.588481] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s) [ 35.588485] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [ 35.671605] wlan4: Limiting TX power to 20 (23 - 3) dBm as advertised by 34:31:c4:bd:c8:98Attachment: signature.asc
Description: This is a digitally signed message part
--- End Message ---
--- Begin Message ---
- To: 804417-done@bugs.debian.org
- Cc: 804417-submitter@bugs.debian.org
- Subject: Closing this bug (BTS maintenance for src:linux bugs)
- From: carnil@debian.org
- Date: Sun, 09 May 2021 07:02:47 -0700 (PDT)
- Message-id: <6097eb87.1c69fb81.87d7f.49f4@mx.google.com>
Hi This bug was filed for a very old kernel or the bug is old itself without resolution. If you can reproduce it with - the current version in unstable/testing - the latest kernel from backports please reopen the bug, see https://www.debian.org/Bugs/server-control for details. Regards, Salvatore
--- End Message ---