[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#798909: marked as done (linux-image-4.1.0-0.bpo.2-686-pae: Brightness control on a HP Compaq nx8220 does not work anymore since kernel 3.16)



Your message dated Sun, 09 May 2021 05:48:19 -0700 (PDT)
with message-id <6097da13.1c69fb81.a40ba.9c4c@mx.google.com>
and subject line Closing this bug (BTS maintenance for src:linux bugs)
has caused the Debian Bug report #798909,
regarding linux-image-4.1.0-0.bpo.2-686-pae: Brightness control on a HP Compaq nx8220 does not work anymore since kernel 3.16
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
798909: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=798909
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: src:linux
Version: 4.1.6-1~bpo8+1
Severity: normal

Dear Maintainer,

since kernel version 3.16.7-ckt11-1+deb8u3 from jessie the keys
for brightness control on my HP Compaq nx8220 laptop do not work
anymore. The problem also exists with kernel version
4.1.6-1~bpo8+1 from jessie-backports.

When I boot an older kernel (linux-image-3.14-2-686-pae, version
3.14.15-2) the brightness keys do work (without any other changes
to the system).

Regards

Uwe


-- Package-specific info:
** Version:
Linux version 4.1.0-0.bpo.2-686-pae (debian-kernel@lists.debian.org) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Debian 4.1.6-1~bpo8+1 (2015-09-09)

** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.1.0-0.bpo.2-686-pae root=UUID=32077a82-12e5-4f22-a606-1dd16fcd68c1 ro quiet

** Not tainted

** Kernel log:
[   12.005545] [TTM] Initializing pool allocator
[   12.005554] [TTM] Initializing DMA pool allocator
[   12.005594] [drm] radeon: 64M of VRAM memory ready
[   12.005597] [drm] radeon: 512M of GTT memory ready.
[   12.005618] [drm] GART: num cpu pages 131072, num gpu pages 131072
[   12.006564] [drm] radeon: power management initialized
[   12.006584] [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
[   12.007467] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
[   12.007490] radeon 0000:01:00.0: WB enabled
[   12.007496] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000a0000000 and cpu addr 0xf2fe5000
[   12.007499] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   12.007500] [drm] Driver supports precise vblank timestamp query.
[   12.007503] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[   12.007541] radeon 0000:01:00.0: radeon: using MSI.
[   12.007566] [drm] radeon: irq initialized.
[   12.007576] [drm] Loading R300 Microcode
[   12.184489] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/R300_cp.bin
[   12.184887] [drm] radeon: ring at 0x00000000A0001000
[   12.184918] [drm] ring test succeeded in 0 usecs
[   12.185279] [drm] ib test succeeded in 0 usecs
[   12.186619] [drm] Panel ID String: LPL                     
[   12.186626] [drm] Panel Size 1680x1050
[   12.186900] [drm] Radeon Display Connectors
[   12.186905] [drm] Connector 0:
[   12.186909] [drm]   VGA-1
[   12.186916] [drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[   12.186919] [drm]   Encoders:
[   12.186923] [drm]     CRT1: INTERNAL_DAC1
[   12.186927] [drm] Connector 1:
[   12.186931] [drm]   DVI-D-1
[   12.186935] [drm]   HPD1
[   12.186940] [drm]   DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[   12.186944] [drm]   Encoders:
[   12.186948] [drm]     DFP1: INTERNAL_TMDS1
[   12.186951] [drm] Connector 2:
[   12.186955] [drm]   LVDS-1
[   12.186961] [drm]   DDC: 0x68 0x68 0x68 0x68 0x68 0x68 0x68 0x68
[   12.186964] [drm]   Encoders:
[   12.186968] [drm]     LCD1: INTERNAL_LVDS
[   12.186971] [drm] Connector 3:
[   12.186975] [drm]   SVIDEO-1
[   12.186978] [drm]   Encoders:
[   12.186982] [drm]     TV1: INTERNAL_DAC2
[   12.252511] Bluetooth: Core ver 2.20
[   12.252573] NET: Registered protocol family 31
[   12.252575] Bluetooth: HCI device and connection manager initialized
[   12.252724] Bluetooth: HCI socket layer initialized
[   12.252729] Bluetooth: L2CAP socket layer initialized
[   12.252737] Bluetooth: SCO socket layer initialized
[   12.269777] [drm] fb mappable at 0xC00C0000
[   12.269782] [drm] vram apper at 0xC0000000
[   12.269784] [drm] size 7057408
[   12.269785] [drm] fb depth is 24
[   12.269787] [drm]    pitch is 6720
[   12.269981] fbcon: radeondrmfb (fb0) is primary device
[   12.313714] Console: switching to colour frame buffer device 210x65
[   12.322717] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[   12.322720] radeon 0000:01:00.0: registered panic notifier
[   12.322835] [drm] Initialized radeon 2.42.0 20080528 for 0000:01:00.0 on minor 0
[   12.499707] usbcore: registered new interface driver btusb
[   12.568146] cfg80211: World regulatory domain updated:
[   12.568153] cfg80211:  DFS Master region: unset
[   12.568156] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   12.568161] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   12.568165] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   12.568169] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   12.568174] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   12.568179] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   12.568183] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   12.568186] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   12.568190] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   12.676468] Adding 979960k swap on /dev/sda2.  Priority:-1 extents:1 across:979960k FS
[   20.121239] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[   20.545061] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[   20.590755] systemd-journald[154]: Received request to flush runtime journal from PID 1
[   20.818962] ttyS0: LSR safety check engaged!
[   20.819931] ttyS0: LSR safety check engaged!
[   20.821885] ttyS3: LSR safety check engaged!
[   20.822717] ttyS3: LSR safety check engaged!
[   21.983799] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   24.924104] tg3 0000:10:00.0 eth0: Link is up at 1000 Mbps, full duplex
[   24.924125] tg3 0000:10:00.0 eth0: Flow control is off for TX and off for RX
[   24.925313] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   26.484656] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   29.325310] tg3 0000:10:00.0 eth0: Link is up at 1000 Mbps, full duplex
[   29.325331] tg3 0000:10:00.0 eth0: Flow control is off for TX and off for RX
[   29.326515] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   32.598334] RPC: Registered named UNIX socket transport module.
[   32.598341] RPC: Registered udp transport module.
[   32.598343] RPC: Registered tcp transport module.
[   32.598346] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   32.614746] FS-Cache: Loaded
[   32.683609] FS-Cache: Netfs 'nfs' registered for caching
[   32.722881] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   34.760942] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
[   35.410497] ttyS3: LSR safety check engaged!
[   35.760739] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
[   35.788812] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   35.788818] Bluetooth: BNEP filters: protocol multicast
[   35.788827] Bluetooth: BNEP socket layer initialized

** Model information
not available

** Loaded modules:
cpufreq_powersave
cpufreq_stats
cpufreq_conservative
bnep
cpufreq_userspace
binfmt_misc
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
grace
fscache
sunrpc
btusb
btbcm
btintel
bluetooth
joydev
radeon
iTCO_wdt
iTCO_vendor_support
ttm
drm_kms_helper
drm
hp_wmi
ppdev
sparse_keymap
pcspkr
snd_intel8x0
snd_intel8x0m
tg3
evdev
snd_ac97_codec
ptp
snd_pcm_oss
pps_core
snd_mixer_oss
ipw2200
snd_pcm
libipw
snd_timer
psmouse
lib80211
snd
soundcore
serio_raw
ac97_bus
sr_mod
tifm_7xx1
cdrom
cfg80211
pcmcia
libphy
i2c_algo_bit
lpc_ich
mfd_core
tifm_core
yenta_socket
rfkill
sg
pcmcia_rsrc
rng_core
pcmcia_core
firewire_ohci
sdhci_pci
firewire_core
sdhci
crc_itu_t
irda
mmc_core
crc_ccitt
parport_pc
parport
wmi
tpm_infineon
8250_fintek
tpm
battery
ehci_pci
uhci_hcd
ehci_hcd
usbcore
usb_common
ac
video
shpchp
button
acpi_cpufreq
processor
fuse
autofs4
ext4
crc16
mbcache
jbd2
sd_mod
ata_generic
ata_piix
libata
scsi_mod
fan
thermal
thermal_sys

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller [8086:2590] (rev 03)
	Subsystem: Hewlett-Packard Company Compaq nw8240/nx8220 [103c:0934]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:01.0 PCI bridge [0604]: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port [8086:2591] (rev 03) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 00002000-00002fff
	Memory behind bridge: c8800000-c8bfffff
	Prefetchable memory behind bridge: c0000000-c7ffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 [8086:2660] (rev 03) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=10, subordinate=10, sec-latency=0
	I/O behind bridge: 00004000-00004fff
	Memory behind bridge: c8000000-c83fffff
	Prefetchable memory behind bridge: 0000000080000000-00000000801fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 [8086:2662] (rev 03) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=20, subordinate=20, sec-latency=0
	I/O behind bridge: 00005000-00005fff
	Memory behind bridge: 80200000-803fffff
	Prefetchable memory behind bridge: 0000000080400000-00000000805fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1d.0 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 [8086:2658] (rev 03) (prog-if 00 [UHCI])
	Subsystem: Hewlett-Packard Company Compaq nw8240/nx8220 [103c:0934]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 20
	Region 4: I/O ports at 3000 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.1 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 [8086:2659] (rev 03) (prog-if 00 [UHCI])
	Subsystem: Hewlett-Packard Company Compaq nw8240/nx8220 [103c:0934]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 17
	Region 4: I/O ports at 3020 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.2 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 [8086:265a] (rev 03) (prog-if 00 [UHCI])
	Subsystem: Hewlett-Packard Company Compaq nw8240/nx8220 [103c:0934]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 18
	Region 4: I/O ports at 3040 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.7 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 03) (prog-if 20 [EHCI])
	Subsystem: Hewlett-Packard Company Compaq nw8240/nx8220 [103c:0934]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 20
	Region 0: Memory at c8c00000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev d3) (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=02, subordinate=06, sec-latency=32
	I/O behind bridge: 00006000-00006fff
	Memory behind bridge: c8400000-c87fffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:1e.2 Multimedia audio controller [0401]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller [8086:266e] (rev 03)
	Subsystem: Hewlett-Packard Company Compaq nw8240/nx8220 [103c:0934]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 21
	Region 0: I/O ports at 3100 [size=256]
	Region 1: I/O ports at 3200 [size=64]
	Region 2: Memory at c8c01000 (32-bit, non-prefetchable) [size=512]
	Region 3: Memory at c8c02000 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: snd_intel8x0

00:1e.3 Modem [0703]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller [8086:266d] (rev 03) (prog-if 00 [Generic])
	Subsystem: Hewlett-Packard Company Compaq nw8240/nx8220 [103c:0934]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 22
	Region 0: I/O ports at 3400 [size=256]
	Region 1: I/O ports at 3500 [size=128]
	Capabilities: <access denied>
	Kernel driver in use: snd_intel8x0m

00:1f.0 ISA bridge [0601]: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge [8086:2641] (rev 03)
	Subsystem: Hewlett-Packard Company Compaq nw8240/nx8220 [103c:0934]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Kernel driver in use: lpc_ich

00:1f.1 IDE interface [0101]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller [8086:266f] (rev 03) (prog-if 8a [Master SecP PriP])
	Subsystem: Hewlett-Packard Company Compaq nw8240/nx8220 [103c:0934]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: I/O ports at 01f0 [size=8]
	Region 1: I/O ports at 03f4
	Region 2: I/O ports at 0170 [size=8]
	Region 3: I/O ports at 0374
	Region 4: I/O ports at 3580 [size=16]
	Kernel driver in use: ata_piix

01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RV380/M24 [Mobility Radeon X600] [1002:3150] (prog-if 00 [VGA controller])
	Subsystem: Hewlett-Packard Company nx8220 [103c:0934]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 27
	Region 0: Memory at c0000000 (32-bit, prefetchable) [size=128M]
	Region 1: I/O ports at 2000 [size=256]
	Region 2: Memory at c8800000 (32-bit, non-prefetchable) [size=64K]
	[virtual] Expansion ROM at c8820000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: radeon

02:04.0 Network controller [0280]: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection [8086:4220] (rev 05)
	Subsystem: Hewlett-Packard Company nc6120/nx8220/nw8240 [103c:12f6]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (750ns min, 6000ns max), Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 21
	Region 0: Memory at c8400000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: ipw2200

02:06.0 CardBus bridge [0607]: Texas Instruments PCIxx21/x515 Cardbus Controller [104c:8031]
	Subsystem: Hewlett-Packard Company Compaq nw8240/nx8220 [103c:0934]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 168, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 18
	Region 0: Memory at c8401000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
	Memory window 0: cc000000-cfffffff (prefetchable)
	Memory window 1: d0000000-d3ffffff
	I/O window 0: 00006000-000060ff
	I/O window 1: 00006400-000064ff
	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
	16-bit legacy interface ports at 0001
	Capabilities: <access denied>
	Kernel driver in use: yenta_cardbus

02:06.2 FireWire (IEEE 1394) [0c00]: Texas Instruments OHCI Compliant IEEE 1394 Host Controller [104c:8032] (prog-if 10 [OHCI])
	Subsystem: Hewlett-Packard Company Compaq nw8240/nx8220 [103c:0934]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes
	Interrupt: pin C routed to IRQ 22
	Region 0: Memory at c8402000 (32-bit, non-prefetchable) [size=2K]
	Region 1: Memory at c8404000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: firewire_ohci

02:06.3 Mass storage controller [0180]: Texas Instruments PCIxx21 Integrated FlashMedia Controller [104c:8033]
	Subsystem: Hewlett-Packard Company Compaq nw8240/nx8220 [103c:0934]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (1750ns min, 1000ns max), Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 19
	Region 0: Memory at c8408000 (32-bit, non-prefetchable) [size=8K]
	Capabilities: <access denied>
	Kernel driver in use: tifm_7xx1

02:06.4 SD Host controller [0805]: Texas Instruments PCI6411/6421/6611/6621/7411/7421/7611/7621 Secure Digital Controller [104c:8034]
	Subsystem: Hewlett-Packard Company Compaq nw8240/nx8220 [103c:0934]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (1750ns min, 1000ns max), Cache Line Size: 64 bytes
	Interrupt: pin C routed to IRQ 22
	Region 0: Memory at c840a000 (32-bit, non-prefetchable) [size=256]
	Region 1: Memory at c840b000 (32-bit, non-prefetchable) [size=256]
	Region 2: Memory at c840c000 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: sdhci-pci

02:06.5 Communication controller [0780]: Texas Instruments PCI6411/6421/6611/6621/7411/7421/7611/7621 Smart Card Controller [104c:8035]
	Subsystem: Hewlett-Packard Company Compaq nw8240/nx8220 [103c:0934]
	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at c840d000 (32-bit, non-prefetchable) [size=4K]
	Region 1: Memory at c840e000 (32-bit, non-prefetchable) [size=4K]
	Region 2: Memory at c840f000 (32-bit, non-prefetchable) [size=4K]
	Region 3: Memory at c8410000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>

10:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5751M Gigabit Ethernet PCI Express [14e4:167d] (rev 11)
	Subsystem: Hewlett-Packard Company HP nx8220 [103c:0934]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at c8000000 (64-bit, non-prefetchable) [size=64K]
	Expansion ROM at <ignored> [disabled]
	Capabilities: <access denied>
	Kernel driver in use: tg3


** USB devices:
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 03f0:011d Hewlett-Packard Bluetooth 1.2 Interface [Broadcom BCM2035]
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


-- System Information:
Debian Release: 8.2
  APT prefers stable
  APT policy: (850, 'stable'), (840, 'stable-updates'), (650, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)

Kernel: Linux 4.1.0-0.bpo.2-686-pae (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages linux-image-4.1.0-0.bpo.2-686-pae depends on:
ii  debconf [debconf-2.0]                   1.5.56
ii  initramfs-tools [linux-initramfs-tool]  0.116
ii  kmod                                    18-3
ii  linux-base                              3.5

Versions of packages linux-image-4.1.0-0.bpo.2-686-pae recommends:
ii  firmware-linux-free  3.3
pn  irqbalance           <none>
ii  libc6-i686           2.19-18+deb8u1

Versions of packages linux-image-4.1.0-0.bpo.2-686-pae suggests:
pn  debian-kernel-handbook  <none>
ii  grub-pc                 2.02~beta2-22
pn  linux-doc-4.1           <none>

Versions of packages linux-image-4.1.0-0.bpo.2-686-pae is related to:
pn  firmware-atheros        <none>
pn  firmware-bnx2           <none>
pn  firmware-bnx2x          <none>
pn  firmware-brcm80211      <none>
pn  firmware-intelwimax     <none>
ii  firmware-ipw2x00        0.43
pn  firmware-ivtv           <none>
pn  firmware-iwlwifi        <none>
pn  firmware-libertas       <none>
pn  firmware-linux          <none>
ii  firmware-linux-nonfree  0.43
pn  firmware-myricom        <none>
pn  firmware-netxen         <none>
pn  firmware-qlogic         <none>
pn  firmware-ralink         <none>
pn  firmware-realtek        <none>
pn  xen-hypervisor          <none>

-- debconf information:
  linux-image-4.1.0-0.bpo.2-686-pae/postinst/depmod-error-initrd-4.1.0-0.bpo.2-686-pae: false
  linux-image-4.1.0-0.bpo.2-686-pae/prerm/removing-running-kernel-4.1.0-0.bpo.2-686-pae: true
  linux-image-4.1.0-0.bpo.2-686-pae/postinst/mips-initrd-4.1.0-0.bpo.2-686-pae:

--- End Message ---
--- Begin Message ---
Hi

This bug was filed for a very old kernel or the bug is old itself
without resolution.

If you can reproduce it with

- the current version in unstable/testing
- the latest kernel from backports

please reopen the bug, see https://www.debian.org/Bugs/server-control
for details.

Regards,
Salvatore

--- End Message ---

Reply to: