--- Begin Message ---
- To: submit@bugs.debian.org
- Subject: linux-image-3.16.0-4-amd64: Xorg startup delayed (minutes), errors reported by i915 driver
- From: Dimitri Chausson <tri2000@gmx.net>
- Date: Thu, 2 Apr 2015 23:30:03 +0200
- Message-id: <20150402233003.6989713621c825a234a9a6e8@gmx.net>
Package: src:linux
Version: 3.16.7-ckt7-1
Severity: normal
Dear Maintainer,
I guess the problem eventually occured after a system update. Until now, I do
not have a solution, I did not find the same description in forums / posts /
bug reports..
Thanks for your time,
Dimitri
-- Package-specific info:
** Version:
Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=5d41cc9b-817f-44a6-82c9-75898ef11f11 ro quiet
** Tainted: W (512)
* Taint on warning.
** Kernel log:
[ 12.898566] EXT4-fs (sdb2): mounting ext3 file system using the ext4 subsystem
[ 12.948220] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[ 12.954355] systemd-journald[181]: Received request to flush runtime journal from PID 1
[ 13.044101] alx 0000:02:00.0: irq 46 for MSI/MSI-X
[ 13.044238] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 13.045006] alx 0000:02:00.0 eth1: NIC Up: 1 Gbps Full
[ 13.045217] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 13.807729] cfg80211: Calling CRDA to update world regulatory domain
[ 13.899500] cfg80211: World regulatory domain updated:
[ 13.899504] cfg80211: DFS Master region: unset
[ 13.899505] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 13.899508] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 13.899509] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 13.899511] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 13.899513] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 13.899515] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 13.899516] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 13.899517] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 13.899519] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 14.266335] [drm:cpt_set_fifo_underrun_reporting] *ERROR* uncleared pch fifo underrun on pch transcoder B
[ 1804.139623] ------------[ cut here ]------------
[ 1804.139644] WARNING: CPU: 0 PID: 1194 at /build/linux-SAvLSw/linux-3.16.7-ckt7/drivers/gpu/drm/i915/intel_display.c:4952 intel_modeset_check_state+0x775/0x780 [i915]()
[ 1804.139646] wrong connector dpms state
[ 1804.139647] Modules linked in: cfg80211 rfkill binfmt_misc x86_pkg_temp_thermal intel_powerclamp intel_rapl coretemp kvm crc32_pclmul ghash_clmulni_intel iTCO_wdt iTCO_vendor_support aesni_intel i915 aes_x86_64 drm_kms_helper drm joydev lrw gf128mul i2c_i801 glue_helper ablk_helper i2c_algo_bit loop cryptd evdev snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic i2c_core lpc_ich shpchp mei_me mfd_core snd_hda_intel pcspkr mei psmouse fuse snd_hda_controller snd_hda_codec snd_hwdep snd_pcm tpm_infineon snd_timer parport_pc tpm_tis snd soundcore battery tpm video serio_raw processor ppdev button lp parport autofs4 ext4 crc16 mbcache jbd2 sg sd_mod crc_t10dif sr_mod crct10dif_generic cdrom hid_generic ata_generic usbhid hid crct10dif_pclmul crct10dif_common crc32c_intel ata_piix via_rhine
[ 1804.139693] ahci mii alx mdio libahci pata_jmicron ehci_pci libata xhci_hcd ehci_hcd scsi_mod usbcore usb_common thermal fan thermal_sys
[ 1804.139706] CPU: 0 PID: 1194 Comm: Xorg Not tainted 3.16.0-4-amd64 #1 Debian 3.16.7-ckt7-1
[ 1804.139707] Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./H77-DS3H, BIOS F8c 11/21/2012
[ 1804.139709] 0000000000000009 ffffffff81509e7c ffff88021321bcf0 ffffffff81067727
[ 1804.139712] ffff8800d4109400 ffff88021321bd40 ffff880215b06028 ffff8800d4207800
[ 1804.139715] 0000000000000000 ffffffff8106778c ffffffffa04feb45 ffff880000000018
[ 1804.139718] Call Trace:
[ 1804.139725] [<ffffffff81509e7c>] ? dump_stack+0x41/0x51
[ 1804.139730] [<ffffffff81067727>] ? warn_slowpath_common+0x77/0x90
[ 1804.139733] [<ffffffff8106778c>] ? warn_slowpath_fmt+0x4c/0x50
[ 1804.139744] [<ffffffffa04c852c>] ? intel_hdmi_get_hw_state+0x4c/0xc0 [i915]
[ 1804.139755] [<ffffffffa04906d0>] ? gen6_read32+0x120/0x120 [i915]
[ 1804.139765] [<ffffffffa04a9405>] ? intel_modeset_check_state+0x775/0x780 [i915]
[ 1804.139773] [<ffffffffa040efd6>] ? drm_mode_obj_set_property_ioctl+0x396/0x3b0 [drm]
[ 1804.139779] [<ffffffffa040f01e>] ? drm_mode_connector_property_set_ioctl+0x2e/0x40 [drm]
[ 1804.139785] [<ffffffffa03fe8b7>] ? drm_ioctl+0x1c7/0x5b0 [drm]
[ 1804.139790] [<ffffffff811b9ecf>] ? do_vfs_ioctl+0x2cf/0x4b0
[ 1804.139793] [<ffffffff81079525>] ? restore_altstack+0x15/0x30
[ 1804.139797] [<ffffffff81013066>] ? sys_rt_sigreturn+0xa6/0xb0
[ 1804.139800] [<ffffffff811ba131>] ? SyS_ioctl+0x81/0xa0
[ 1804.139804] [<ffffffff815105c9>] ? stub_rt_sigreturn+0x69/0xa0
[ 1804.139807] [<ffffffff8150ff6d>] ? system_call_fast_compare_end+0x10/0x15
[ 1804.139809] ---[ end trace 7044ced4016ec1ff ]---
[ 1804.139810] ------------[ cut here ]------------
[ 1804.139820] WARNING: CPU: 0 PID: 1194 at /build/linux-SAvLSw/linux-3.16.7-ckt7/drivers/gpu/drm/i915/intel_display.c:4956 intel_modeset_check_state+0x737/0x780 [i915]()
[ 1804.139821] encoder->connectors_active not set
[ 1804.139822] Modules linked in: cfg80211 rfkill binfmt_misc x86_pkg_temp_thermal intel_powerclamp intel_rapl coretemp kvm crc32_pclmul ghash_clmulni_intel iTCO_wdt iTCO_vendor_support aesni_intel i915 aes_x86_64 drm_kms_helper drm joydev lrw gf128mul i2c_i801 glue_helper ablk_helper i2c_algo_bit loop cryptd evdev snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic i2c_core lpc_ich shpchp mei_me mfd_core snd_hda_intel pcspkr mei psmouse fuse snd_hda_controller snd_hda_codec snd_hwdep snd_pcm tpm_infineon snd_timer parport_pc tpm_tis snd soundcore battery tpm video serio_raw processor ppdev button lp parport autofs4 ext4 crc16 mbcache jbd2 sg sd_mod crc_t10dif sr_mod crct10dif_generic cdrom hid_generic ata_generic usbhid hid crct10dif_pclmul crct10dif_common crc32c_intel ata_piix via_rhine
[ 1804.139858] ahci mii alx mdio libahci pata_jmicron ehci_pci libata xhci_hcd ehci_hcd scsi_mod usbcore usb_common thermal fan thermal_sys
[ 1804.139867] CPU: 0 PID: 1194 Comm: Xorg Tainted: G W 3.16.0-4-amd64 #1 Debian 3.16.7-ckt7-1
[ 1804.139868] Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./H77-DS3H, BIOS F8c 11/21/2012
[ 1804.139870] 0000000000000009 ffffffff81509e7c ffff88021321bcf0 ffffffff81067727
[ 1804.139872] ffff8800d4109400 ffff88021321bd40 ffff880215b06028 ffff8800d4207800
[ 1804.139875] 0000000000000000 ffffffff8106778c ffffffffa04f6bf0 ffff880000000018
[ 1804.139877] Call Trace:
[ 1804.139881] [<ffffffff81509e7c>] ? dump_stack+0x41/0x51
[ 1804.139884] [<ffffffff81067727>] ? warn_slowpath_common+0x77/0x90
[ 1804.139887] [<ffffffff8106778c>] ? warn_slowpath_fmt+0x4c/0x50
[ 1804.139897] [<ffffffffa04c852c>] ? intel_hdmi_get_hw_state+0x4c/0xc0 [i915]
[ 1804.139906] [<ffffffffa04a93c7>] ? intel_modeset_check_state+0x737/0x780 [i915]
[ 1804.139912] [<ffffffffa040efd6>] ? drm_mode_obj_set_property_ioctl+0x396/0x3b0 [drm]
[ 1804.139917] [<ffffffffa040f01e>] ? drm_mode_connector_property_set_ioctl+0x2e/0x40 [drm]
[ 1804.139923] [<ffffffffa03fe8b7>] ? drm_ioctl+0x1c7/0x5b0 [drm]
[ 1804.139926] [<ffffffff811b9ecf>] ? do_vfs_ioctl+0x2cf/0x4b0
[ 1804.139929] [<ffffffff81079525>] ? restore_altstack+0x15/0x30
[ 1804.139932] [<ffffffff81013066>] ? sys_rt_sigreturn+0xa6/0xb0
[ 1804.139935] [<ffffffff811ba131>] ? SyS_ioctl+0x81/0xa0
[ 1804.139938] [<ffffffff815105c9>] ? stub_rt_sigreturn+0x69/0xa0
[ 1804.139941] [<ffffffff8150ff6d>] ? system_call_fast_compare_end+0x10/0x15
[ 1804.139943] ---[ end trace 7044ced4016ec200 ]---
[ 1804.139949] ------------[ cut here ]------------
[ 1804.139959] WARNING: CPU: 0 PID: 1194 at /build/linux-SAvLSw/linux-3.16.7-ckt7/drivers/gpu/drm/i915/intel_display.c:10122 intel_modeset_check_state+0x5d6/0x780 [i915]()
[ 1804.139960] encoder's hw state doesn't match sw tracking (expected 0, found 1)
[ 1804.139961] Modules linked in: cfg80211 rfkill binfmt_misc x86_pkg_temp_thermal intel_powerclamp intel_rapl coretemp kvm crc32_pclmul ghash_clmulni_intel iTCO_wdt iTCO_vendor_support aesni_intel i915 aes_x86_64 drm_kms_helper drm joydev lrw gf128mul i2c_i801 glue_helper ablk_helper i2c_algo_bit loop cryptd evdev snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic i2c_core lpc_ich shpchp mei_me mfd_core snd_hda_intel pcspkr mei psmouse fuse snd_hda_controller snd_hda_codec snd_hwdep snd_pcm tpm_infineon snd_timer parport_pc tpm_tis snd soundcore battery tpm video serio_raw processor ppdev button lp parport autofs4 ext4 crc16 mbcache jbd2 sg sd_mod crc_t10dif sr_mod crct10dif_generic cdrom hid_generic ata_generic usbhid hid crct10dif_pclmul crct10dif_common crc32c_intel ata_piix via_rhine
[ 1804.139996] ahci mii alx mdio libahci pata_jmicron ehci_pci libata xhci_hcd ehci_hcd scsi_mod usbcore usb_common thermal fan thermal_sys
[ 1804.140005] CPU: 0 PID: 1194 Comm: Xorg Tainted: G W 3.16.0-4-amd64 #1 Debian 3.16.7-ckt7-1
[ 1804.140006] Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./H77-DS3H, BIOS F8c 11/21/2012
[ 1804.140007] 0000000000000009 ffffffff81509e7c ffff88021321bcf0 ffffffff81067727
[ 1804.140010] 0000000000000001 ffff88021321bd40 ffff8800d4207b40 ffff8800d4207800
[ 1804.140012] ffff88021398a800 ffffffff8106778c ffffffffa04f6d58 ffff880200000028
[ 1804.140015] Call Trace:
[ 1804.140018] [<ffffffff81509e7c>] ? dump_stack+0x41/0x51
[ 1804.140021] [<ffffffff81067727>] ? warn_slowpath_common+0x77/0x90
[ 1804.140024] [<ffffffff8106778c>] ? warn_slowpath_fmt+0x4c/0x50
[ 1804.140034] [<ffffffffa04c852c>] ? intel_hdmi_get_hw_state+0x4c/0xc0 [i915]
[ 1804.140042] [<ffffffffa04a9266>] ? intel_modeset_check_state+0x5d6/0x780 [i915]
[ 1804.140048] [<ffffffffa040efd6>] ? drm_mode_obj_set_property_ioctl+0x396/0x3b0 [drm]
[ 1804.140053] [<ffffffffa040f01e>] ? drm_mode_connector_property_set_ioctl+0x2e/0x40 [drm]
[ 1804.140059] [<ffffffffa03fe8b7>] ? drm_ioctl+0x1c7/0x5b0 [drm]
[ 1804.140062] [<ffffffff811b9ecf>] ? do_vfs_ioctl+0x2cf/0x4b0
[ 1804.140065] [<ffffffff81079525>] ? restore_altstack+0x15/0x30
[ 1804.140068] [<ffffffff81013066>] ? sys_rt_sigreturn+0xa6/0xb0
[ 1804.140071] [<ffffffff811ba131>] ? SyS_ioctl+0x81/0xa0
[ 1804.140074] [<ffffffff815105c9>] ? stub_rt_sigreturn+0x69/0xa0
[ 1804.140076] [<ffffffff8150ff6d>] ? system_call_fast_compare_end+0x10/0x15
[ 1804.140078] ---[ end trace 7044ced4016ec201 ]---
[ 4215.414586] perf interrupt took too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
** Model information
sys_vendor: Gigabyte Technology Co., Ltd.
product_name: To be filled by O.E.M.
product_version: To be filled by O.E.M.
chassis_vendor: Gigabyte Technology Co., Ltd.
chassis_version: To Be Filled By O.E.M.
bios_vendor: American Megatrends Inc.
bios_version: F8c
board_vendor: Gigabyte Technology Co., Ltd.
board_name: H77-DS3H
board_version: To be filled by O.E.M.
** Loaded modules:
cfg80211
rfkill
binfmt_misc
x86_pkg_temp_thermal
intel_powerclamp
intel_rapl
coretemp
kvm
crc32_pclmul
ghash_clmulni_intel
iTCO_wdt
iTCO_vendor_support
aesni_intel
i915
aes_x86_64
drm_kms_helper
drm
joydev
lrw
gf128mul
i2c_i801
glue_helper
ablk_helper
i2c_algo_bit
loop
cryptd
evdev
snd_hda_codec_hdmi
snd_hda_codec_realtek
snd_hda_codec_generic
i2c_core
lpc_ich
shpchp
mei_me
mfd_core
snd_hda_intel
pcspkr
mei
psmouse
fuse
snd_hda_controller
snd_hda_codec
snd_hwdep
snd_pcm
tpm_infineon
snd_timer
parport_pc
tpm_tis
snd
soundcore
battery
tpm
video
serio_raw
processor
ppdev
button
lp
parport
autofs4
ext4
crc16
mbcache
jbd2
sg
sd_mod
crc_t10dif
sr_mod
crct10dif_generic
cdrom
hid_generic
ata_generic
usbhid
hid
crct10dif_pclmul
crct10dif_common
crc32c_intel
ata_piix
via_rhine
ahci
mii
alx
mdio
libahci
pata_jmicron
ehci_pci
libata
xhci_hcd
ehci_hcd
scsi_mod
usbcore
usb_common
thermal
fan
thermal_sys
** Network interface configuration:
auto lo
iface lo inet loopback
allow-hotplug eth1
iface eth1 inet dhcp
iface eth0 inet static
address 192.168.1.55
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 00:05:5d:a2:4a:3a brd ff:ff:ff:ff:ff:ff
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether 94:de:80:09:75:91 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.74/24 brd 192.168.1.255 scope global eth1
valid_lft forever preferred_lft forever
inet6 fe80::96de:80ff:fe09:7591/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
eth0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
eth1: 8442449 8331 0 0 0 0 0 80 1119817 7844 0 0 0 0 0 0
lo: 14173 39 0 0 0 0 0 0 14173 39 0 0 0 0 0 0
*** Protocol statistics:
Ip:
8195 total packets received
2 with invalid addresses
0 forwarded
0 incoming packets discarded
8193 incoming packets delivered
7607 requests sent out
Icmp:
115 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
echo requests: 115
115 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
echo replies: 115
IcmpMsg:
InType8: 115
OutType0: 115
Tcp:
276 active connections openings
2 passive connection openings
2 failed connection attempts
3 connection resets received
2 connections established
7548 segments received
6888 segments send out
64 segments retransmited
1 bad segments received.
53 resets sent
Udp:
443 packets received
0 packets to unknown port received.
0 packet receive errors
535 packets sent
UdpLite:
TcpExt:
127 TCP sockets finished time wait in fast timer
74 delayed acks sent
Quick ack mode was activated 6 times
5237 packet headers predicted
759 acknowledgments not containing data payload received
172 predicted acknowledgments
1 times recovered from packet loss by selective acknowledgements
1 fast retransmits
8 other TCP timeouts
TCPLossProbes: 5
6 DSACKs sent for old packets
16 connections reset due to unexpected data
3 connections reset due to early user close
8 connections aborted due to timeout
TCPSackShiftFallback: 7
TCPRcvCoalesce: 500
TCPOFOQueue: 469
TCPChallengeACK: 1
TCPSYNChallenge: 1
TCPAutoCorking: 55
TCPOrigDataSent: 1237
IpExt:
InMcastPkts: 147
OutMcastPkts: 69
InBcastPkts: 4
OutBcastPkts: 4
InOctets: 8321743
OutOctets: 995038
InMcastOctets: 7534
OutMcastOctets: 5374
InBcastOctets: 196
OutBcastOctets: 196
InNoECTPkts: 8203
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller [8086:0150] (rev 09)
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:02.0 VGA compatible controller [0300]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller [8086:0152] (rev 09) (prog-if 00 [VGA controller])
Subsystem: Gigabyte Technology Co., Ltd Device [1458:d000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 45
Region 0: Memory at f7800000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) (prog-if 30 [XHCI])
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5007]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 42
Region 0: Memory at f7f00000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04)
Subsystem: Gigabyte Technology Co., Ltd Device [1458:1c3a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 44
Region 0: Memory at f7f19000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) (prog-if 20 [EHCI])
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5006]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7f17000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04)
Subsystem: Gigabyte Technology Co., Ltd Device [1458:a002]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 43
Region 0: Memory at f7f10000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f7e00000-f7efffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 [8086:1e14] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f7d00000-f7dfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev c4) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=04, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: f7c00000-f7cfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) (prog-if 20 [EHCI])
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5006]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7f16000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge [0601]: Intel Corporation H77 Express Chipset LPC Controller [8086:1e4a] (rev 04)
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 IDE interface [0101]: Intel Corporation 7 Series/C210 Series Chipset Family 4-port SATA Controller [IDE mode] [8086:1e00] (rev 04) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Gigabyte Technology Co., Ltd Device [1458:b005]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at f110 [size=8]
Region 1: I/O ports at f100 [size=4]
Region 2: I/O ports at f0f0 [size=8]
Region 3: I/O ports at f0e0 [size=4]
Region 4: I/O ports at f0d0 [size=16]
Region 5: I/O ports at f0c0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04)
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5001]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f7f15000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
00:1f.5 IDE interface [0101]: Intel Corporation 7 Series/C210 Series Chipset Family 2-port SATA Controller [IDE mode] [8086:1e08] (rev 04) (prog-if 85 [Master SecO PriO])
Subsystem: Gigabyte Technology Co., Ltd Device [1458:b002]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at f0b0 [size=8]
Region 1: I/O ports at f0a0 [size=4]
Region 2: I/O ports at f090 [size=8]
Region 3: I/O ports at f080 [size=4]
Region 4: I/O ports at f070 [size=16]
Region 5: I/O ports at f060 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
01:00.0 SATA controller [0106]: JMicron Technology Corp. JMB363 SATA/IDE Controller [197b:2363] (rev 10) (prog-if 01 [AHCI 1.0])
Subsystem: JMicron Technology Corp. JMB363 SATA/IDE Controller [197b:2363]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 5: Memory at f7e10000 (32-bit, non-prefetchable) [size=512]
Expansion ROM at f7e00000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: ahci
01:00.1 IDE interface [0101]: JMicron Technology Corp. JMB368 IDE controller [197b:0368] (rev 10) (prog-if 85 [Master SecO PriO])
Subsystem: JMicron Technology Corp. Device [197b:1368]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at e040 [size=8]
Region 1: I/O ports at e030 [size=4]
Region 2: I/O ports at e020 [size=8]
Region 3: I/O ports at e010 [size=4]
Region 4: I/O ports at e000 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_jmicron
02:00.0 Ethernet controller [0200]: Qualcomm Atheros AR8161 Gigabit Ethernet [1969:1091] (rev 10)
Subsystem: Gigabyte Technology Co., Ltd Device [1458:e000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at f7d00000 (64-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at d000 [size=128]
Capabilities: <access denied>
Kernel driver in use: alx
03:00.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 41) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=03, secondary=04, subordinate=04, sec-latency=32
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: f7c00000-f7cfffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
04:00.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6102 [Rhine-II] [1106:3065] (rev 43)
Subsystem: D-Link System Inc DFE-530TX rev A [1186:1400]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (750ns min, 2000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at c000 [size=256]
Region 1: Memory at f7c10000 (32-bit, non-prefetchable) [size=256]
Expansion ROM at f7c00000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: via-rhine
** USB devices:
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 003: ID 046d:c31c Logitech, Inc. Keyboard K120 for Business
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 8.0
APT prefers testing
APT policy: (990, 'testing'), (500, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.16.0-4-amd64 (SMP w/4 CPU cores)
Locale: LANG=fr_FR.utf8, LC_CTYPE=fr_FR.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-3.16.0-4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.56
ii initramfs-tools [linux-initramfs-tool] 0.119
ii kmod 18-3
ii linux-base 3.5
ii module-init-tools 18-3
Versions of packages linux-image-3.16.0-4-amd64 recommends:
ii firmware-linux-free 3.3
ii irqbalance 1.0.6-3
Versions of packages linux-image-3.16.0-4-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02~beta2-21
ii linux-doc-3.16 3.16.7-ckt7-1
Versions of packages linux-image-3.16.0-4-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.16.0-4-amd64/postinst/depmod-error-initrd-3.16.0-4-amd64: false
linux-image-3.16.0-4-amd64/postinst/mips-initrd-3.16.0-4-amd64:
linux-image-3.16.0-4-amd64/prerm/removing-running-kernel-3.16.0-4-amd64: true
--- End Message ---