--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-3.16.0-4-amd64: Macbook 2, 1 (2006 model) freezes on boot half of the time on recent kernels (Possibly >=3.14)
- From: "Sam Y." <debian@fastmail.jp>
- Date: Sat, 28 Feb 2015 20:13:18 +0100
- Message-id: <20150228191318.1373.35256.reportbug@sirtaki.home>
Package: src:linux
Version: 3.16.7-ckt4-3
Severity: normal
Tags: upstream
Dear Maintainer,
I am experiencing freezes on boot about 50% of the time on recent kernels:
- Since upgrade from Wheezy to Jessie
- Reproducable with Wheezy and 3.16 kernel from backports
- Reproducable with any Linux distro with a recent kernel (e.g. Linux Arch)
I have a family member who has been experiencing recent freezes booting her Macbook2,1 since she upgraded from Ubuntu 14.04 (3.13 kernel) to Ubuntu 14.10. So it is highly likely this is an upstream issue, probably introduced somewhere in 3.14 or more recent kernels.
Of note are these lines in the kernel log:
Feb 28 19:34:04 sirtaki kernel: [ 22.104518] [drm] GPU HANG: ecode -1:0x00000000, reason: Command parser error, iir 0x00008000, action: con
tinue
Feb 28 19:34:04 sirtaki kernel: [ 22.104521] [drm] GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace.
Feb 28 19:34:04 sirtaki kernel: [ 22.104521] [drm] Please file a _new_ bug report on bugs.freedesktop.org against DRI -> DRM/Intel
Feb 28 19:34:04 sirtaki kernel: [ 22.104522] [drm] drm/i915 developers can then reassign to the right component if it's not a kernel issue.
Feb 28 19:34:04 sirtaki kernel: [ 22.104522] [drm] The gpu crash dump is required to analyze gpu hangs, so please always attach it.
Feb 28 19:34:04 sirtaki kernel: [ 22.104524] [drm] GPU crash dump saved to /sys/class/drm/card0/error
Feb 28 19:34:04 sirtaki kernel: [ 22.104560] [drm] GPU HANG: ecode -1:0x00000000, reason: Command parser error, iir 0x00008000, action: con
tinue
$ lspci |grep VGA
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
The message happens even on succesful boots though.
The freeze happens fairly late in the boot chain, after LUKS is unlocked, disks are mounted and when systemd starts to take over. I added verbose as kernel parameter but couldn't see any abnormal messages during boot (if this is VGA related, perhaps the screen is frozen).
During the freeze, usually the cpu fans (which are usually very silent) start to spin up abnormally as well. After this a hard reset is needed.
$ sudo cat /sys/class/drm/card0/error
GPU HANG: ecode -1:0x00000000, reason: Command parser error, iir 0x00008000, action: continue
Time: 1425148442 s 841957 us
Kernel: 3.16.0-4-amd64
Reset count: 0
Suspend count: 0
PCI ID: 0x27a2
EIR: 0x00000010
IER: 0x00028053
PGTBL_ER: 0x00000102
FORCEWAKE: 0x00000000
DERRMR: 0x00000000
CCID: 0x00000000
Missed interrupts: 0x00000000
fence[0] = 00000000
fence[1] = 00000000
fence[2] = 00000000
fence[3] = 00000000
fence[4] = 00000000
fence[5] = 00000000
fence[6] = 00000000
fence[7] = 00000000
fence[8] = 00000000
fence[9] = 00000000
fence[10] = 00000000
fence[11] = 00000000
fence[12] = 00000000
fence[13] = 00000000
fence[14] = 00000000
fence[15] = 00000000
INSTDONE_0: 0x7fffffc0
INSTDONE_1: 0x00000000
INSTDONE_2: 0x00000000
INSTDONE_3: 0x00000000
render command stream:
bsd command stream:
blt command stream:
vebox command stream:
bsd2 command stream:
Active [0]:
Pinned [0]:
Num Pipes: 2
Pipe [0]:
Power: on
SRC: 027f01df
STAT: 90000a03
Plane [0]:
CNTR: 00000000
STRIDE: 00000000
SIZE: 00000000
POS: 00000000
ADDR: 00000000
Cursor [0]:
CNTR: 00000000
POS: 00000000
BASE: 00000000
Pipe [1]:
Power: on
SRC: 027f018f
STAT: 90000202
Plane [1]:
CNTR: 19000000
STRIDE: 00001000
SIZE: 018f02cf
POS: 00000000
ADDR: 00000000
Cursor [1]:
CNTR: 00000000
POS: 00000000
BASE: 00000000
CPU transcoder: A
Power: on
CONF: 00000000
HTOTAL: 031f027f
HBLANK: 03170287
HSYNC: 02ef028f
VTOTAL: 020c01df
VBLANK: 020401e7
VSYNC: 01eb01e9
CPU transcoder: B
Power: on
CONF: 80000000
HTOTAL: 059f04ff
HBLANK: 059f04ff
HSYNC: 054f052f
VTOTAL: 0336031f
VBLANK: 0336031f
VSYNC: 03280322
-- Package-specific info:
** Version:
Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt4-3 (2015-02-03)
** Command line:
BOOT_IMAGE=/vmlinuz-3.16.0-4-amd64 root=/dev/mapper/rootvg-root ro verbose rootdelay=9
** Not tainted
** Kernel log:
[ 22.104537] [drm:i915_irq_handler] *ERROR* pipe A underrun
[ 22.104538] [drm:i915_irq_handler] *ERROR* pipe B underrun
[ 22.104560] [drm] GPU HANG: ecode -1:0x00000000, reason: Command parser error, iir 0x00008000, action: continue
[ 22.104569] i915: render error detected, EIR: 0x00000010
[ 22.104572] i915: page table error
[ 22.104575] i915: PGTBL_ER: 0x00000102
[ 22.129657] cfg80211: Calling CRDA to update world regulatory domain
[ 22.159266] EXT4-fs (dm-2): re-mounted. Opts: errors=remount-ro
[ 22.166077] usb 4-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -84
[ 22.175063] appletouch 1-2:1.1: Geyser mode initialized.
[ 22.175159] input: appletouch as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.1/input/input13
[ 22.175266] usbcore: registered new interface driver appletouch
[ 22.310080] applesmc: key=225 fan=1 temp=10 index=10 acc=1 lux=0 kbd=0
[ 22.326839] input: applesmc as /devices/platform/applesmc.768/input/input14
[ 22.355513] ath: EEPROM regdomain: 0x37
[ 22.355517] ath: EEPROM indicates we should expect a direct regpair map
[ 22.355520] ath: Country alpha2 being used: XX
[ 22.355521] ath: Regpair used: 0x37
[ 22.415942] iTCO_vendor_support: vendor-support=0
[ 22.417410] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 22.417464] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x0460)
[ 22.418943] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 22.440579] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 22.440922] ieee80211 phy0: Atheros AR5418 MAC/BB Rev:2 AR5133 RF Rev:81 mem=0xffffc90004560000, irq=17
[ 22.441209] cfg80211: Calling CRDA to update world regulatory domain
[ 22.466859] [drm] initialized overlay support
[ 22.620738] Adding 1949692k swap on /dev/mapper/rootvg-swap. Priority:-1 extents:1 across:1949692k SSFS
[ 22.644206] fbcon: inteldrmfb (fb0) is primary device
[ 22.647564] cfg80211: World regulatory domain updated:
[ 22.647567] cfg80211: DFS Master region: unset
[ 22.647568] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 22.647571] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 22.647572] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 22.647573] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 22.647575] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 22.647577] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 22.647578] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 22.647579] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 22.647581] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 22.647679] cfg80211: Calling CRDA for country: XX
[ 22.663137] cfg80211: Regulatory domain changed to country: XX
[ 22.663140] cfg80211: DFS Master region: ETSI
[ 22.663140] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 22.663142] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 22.663144] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 22.663146] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 22.663147] cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
[ 22.700330] usb 4-1: USB disconnect, device number 2
[ 22.940108] usb 4-1: new full-speed USB device number 3 using uhci_hcd
[ 23.137109] usb 4-1: New USB device found, idVendor=05ac, idProduct=8205
[ 23.137113] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 23.165127] Bluetooth: Core ver 2.19
[ 23.165154] NET: Registered protocol family 31
[ 23.165155] Bluetooth: HCI device and connection manager initialized
[ 23.165169] Bluetooth: HCI socket layer initialized
[ 23.165171] Bluetooth: L2CAP socket layer initialized
[ 23.165187] Bluetooth: SCO socket layer initialized
[ 23.173641] usbcore: registered new interface driver btusb
[ 23.231714] usb 5-4: firmware: failed to load isight.fw (-2)
[ 23.231718] usb 5-4: Direct firmware load failed with error -2
[ 23.231720] usb 5-4: Falling back to user helper
[ 23.232902] usbcore: registered new interface driver isight_firmware
[ 23.537374] Console: switching to colour frame buffer device 160x50
[ 23.571619] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 23.571622] i915 0000:00:02.0: registered panic notifier
[ 23.584055] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 23.637178] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 23.640810] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 23.733192] systemd-journald[210]: Received request to flush runtime journal from PID 1
[ 24.000931] RPC: Registered named UNIX socket transport module.
[ 24.002455] RPC: Registered udp transport module.
[ 24.003908] RPC: Registered tcp transport module.
[ 24.005367] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 24.013651] FS-Cache: Loaded
[ 24.032911] FS-Cache: Netfs 'nfs' registered for caching
[ 24.054052] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 24.449527] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 24.450851] Bluetooth: BNEP filters: protocol multicast
[ 24.451655] Bluetooth: BNEP socket layer initialized
[ 24.846218] sky2 0000:01:00.0 eth0: enabling interface
[ 24.847819] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 24.857502] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 26.732759] input: Mouseemu virtual keyboard as /devices/virtual/input/input15
[ 26.733935] input: Mouseemu virtual mouse as /devices/virtual/input/input16
[ 27.589220] wlan0: authenticate with 00:19:70:29:2d:ab
[ 27.591183] wlan0: send auth to 00:19:70:29:2d:ab (try 1/3)
[ 27.594056] wlan0: authenticated
[ 27.596073] wlan0: associate with 00:19:70:29:2d:ab (try 1/3)
[ 27.598981] wlan0: RX AssocResp from 00:19:70:29:2d:ab (capab=0x431 status=0 aid=2)
[ 27.599041] wlan0: associated
[ 27.599072] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 27.599113] cfg80211: Calling CRDA for country: BE
[ 27.603167] cfg80211: Regulatory domain changed to country: BE
[ 27.603174] cfg80211: DFS Master region: ETSI
[ 27.603176] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 27.603180] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 27.603184] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 27.603188] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 27.603191] cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
[ 27.603194] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
** Model information
sys_vendor: Apple Inc.
product_name: MacBook2,1
product_version: 1.0
chassis_vendor: Apple Inc.
chassis_version: Mac-F4208CA9
bios_vendor: Apple Inc.
bios_version: MB21.88Z.00A5.B07.0706270922
board_vendor: Apple Inc.
board_name: Mac-F4208CA9
board_version: PVT
** Loaded modules:
ctr
ccm
uinput
bnep
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
fscache
sunrpc
isight_firmware
ecb
btusb
bluetooth
6lowpan_iphc
joydev
iTCO_wdt
iTCO_vendor_support
arc4
ath9k
ath9k_common
ath9k_hw
coretemp
ath
evdev
appletouch
mac80211
applesmc
kvm_intel
kvm
input_polldev
cfg80211
pcspkr
i915
snd_hda_codec_idt
rfkill
snd_hda_codec_generic
snd_hda_intel
snd_hda_controller
i2c_i801
snd_hda_codec
lpc_ich
snd_hwdep
mfd_core
snd_pcm
drm_kms_helper
snd_timer
drm
snd
rng_core
soundcore
i2c_algo_bit
i2c_core
sbs
sbshc
shpchp
apple_bl
battery
ac
acpi_cpufreq
video
button
processor
thermal_sys
loop
fuse
parport_pc
ppdev
lp
parport
autofs4
ext4
crc16
mbcache
jbd2
xts
gf128mul
algif_skcipher
af_alg
dm_crypt
dm_mod
hid_appleir
hid_apple
usbhid
hid
sd_mod
crc_t10dif
crct10dif_generic
sg
crct10dif_common
sr_mod
cdrom
ata_generic
ata_piix
libata
scsi_mod
firewire_ohci
firewire_core
crc_itu_t
ehci_pci
uhci_hcd
ehci_hcd
sky2
usbcore
usb_common
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN group default qlen 1000
link/ether 00:17:f2:f2:16:27 brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether 00:19:e3:01:3e:6a brd ff:ff:ff:ff:ff:ff
inet x.x.x.x/24 brd x.x.x.255 scope global dynamic wlan0
valid_lft 9886sec preferred_lft 9886sec
inet6 fe80::219:e3ff:fe01:3e6a/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
eth0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
wlan0: 7156226 5428 0 0 0 0 0 0 462122 3530 0 0 0 0 0 0
lo: 2597 19 0 0 0 0 0 0 2597 19 0 0 0 0 0 0
*** Protocol statistics:
Ip:
5421 total packets received
1 with invalid addresses
0 forwarded
0 incoming packets discarded
5381 incoming packets delivered
3468 requests sent out
Icmp:
0 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
11 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 11
IcmpMsg:
OutType3: 11
Tcp:
28 active connections openings
2 passive connection openings
0 failed connection attempts
1 connection resets received
5 connections established
5238 segments received
3323 segments send out
0 segments retransmited
0 bad segments received.
16 resets sent
Udp:
151 packets received
11 packets to unknown port received.
0 packet receive errors
151 packets sent
UdpLite:
TcpExt:
10 TCP sockets finished time wait in fast timer
25 delayed acks sent
4774 packet headers predicted
113 acknowledgments not containing data payload received
106 predicted acknowledgments
2 connections reset due to unexpected data
1 connections reset due to early user close
TCPRcvCoalesce: 508
TCPOFOQueue: 2
TCPAutoCorking: 31
TCPOrigDataSent: 390
IpExt:
InMcastPkts: 26
OutMcastPkts: 28
InOctets: 7083148
OutOctets: 336232
InMcastOctets: 4216
OutMcastOctets: 4296
InNoECTPkts: 5421
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller [8086:27a2] (rev 03) (prog-if 00 [VGA controller])
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at 90380000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at 20e0 [size=8]
Region 2: Memory at 80000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at 90400000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03)
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at 90300000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:07.0 Performance counters [1101]: Intel Corporation Device [8086:27a3] (rev 03)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 90444000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation NM10/ICH7 Family High Definition Audio Controller [8086:27d8] (rev 02)
Subsystem: SigmaTel STAC9221 HD Audio Codec [8384:7680]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 43
Region 0: Memory at 90440000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: 90200000-902fffff
Prefetchable memory behind bridge: 0000000100000000-00000001001fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: 90100000-901fffff
Prefetchable memory behind bridge: 0000000100200000-00000001003fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 21
Region 4: I/O ports at 2080 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 2060 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 2040 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at 2020 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 21
Region 0: Memory at 90445400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
Memory behind bridge: 90000000-900fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02)
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374
Region 4: I/O ports at 20b0 [size=16]
Kernel driver in use: ata_piix
00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode] [8086:27c4] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 20c8 [size=8]
Region 1: I/O ports at 20ec [size=4]
Region 2: I/O ports at 20c0 [size=8]
Region 3: I/O ports at 20e8 [size=4]
Region 4: I/O ports at 20a0 [size=16]
Region 5: Memory at 90445000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation NM10/ICH7 Family SMBus Controller [8086:27da] (rev 02)
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at efa0 [size=32]
01:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller [11ab:4362] (rev 22)
Subsystem: Marvell Technology Group Ltd. Marvell RDK-8053 [11ab:5321]
Physical Slot: 0
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 42
Region 0: Memory at 90200000 (64-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at 1000 [size=256]
Expansion ROM at 90220000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: sky2
02:00.0 Network controller [0280]: Qualcomm Atheros AR5418 Wireless Network Adapter [AR5008E 802.11(a)bgn] (PCI-Express) [168c:0024] (rev 01)
Physical Slot: 1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at 90100000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath9k
03:03.0 FireWire (IEEE 1394) [0c00]: LSI Corporation FW322/323 [TrueFire] 1394a Controller [11c1:5811] (rev 61) (prog-if 10 [OHCI])
Subsystem: LSI Corporation FW322/323 [TrueFire] 1394a Controller [11c1:5811]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B+ DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 248 (3000ns min, 6000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at 90000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
** USB devices:
Bus 005 Device 003: ID 05ac:8300 Apple, Inc. Built-in iSight (no firmware loaded)
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 003: ID 05ac:8205 Apple, Inc. Bluetooth HCI
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 05ac:8240 Apple, Inc. Built-in IR Receiver
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 05ac:021b Apple, Inc. Internal Keyboard/Trackpad (ISO)
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: 8.0
APT prefers testing-updates
APT policy: (500, 'testing-updates'), (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 3.16.0-4-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-3.16.0-4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.55
ii initramfs-tools [linux-initramfs-tool] 0.116
ii kmod 18-3
ii linux-base 3.5
ii module-init-tools 18-3
Versions of packages linux-image-3.16.0-4-amd64 recommends:
ii firmware-linux-free 3.3
ii irqbalance 1.0.6-3
Versions of packages linux-image-3.16.0-4-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02~beta2-20
pn linux-doc-3.16 <none>
Versions of packages linux-image-3.16.0-4-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.16.0-4-amd64/postinst/mips-initrd-3.16.0-4-amd64:
linux-image-3.16.0-4-amd64/postinst/depmod-error-initrd-3.16.0-4-amd64: false
linux-image-3.16.0-4-amd64/prerm/removing-running-kernel-3.16.0-4-amd64: true
--- End Message ---