[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#779350: marked as done (linux-image-3.2.0-4-amd64: Bridge no longer passes some multicast packets)



Your message dated Sat, 08 May 2021 08:41:02 -0700 (PDT)
with message-id <6096b10e.1c69fb81.6b71.59e2@mx.google.com>
and subject line Closing this bug (BTS maintenance for src:linux bugs)
has caused the Debian Bug report #779350,
regarding linux-image-3.2.0-4-amd64: Bridge no longer passes some multicast packets
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
779350: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=779350
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: src:linux
Version: 3.2.65-1+deb7u2
Severity: normal

Dear Maintainer,

Upon upgrading my linux-image-3.2.0-4-amd64 package from
3.2.65-1+deb7u1 to 3.2.65-1+deb7u2 it appears that my bridge device is
no longer able to pass (at least some) multicast packets.

I've reproduced the problem on two machines (on the first I solved it
by upgrading to the wheezy-backports kernel, on the second one I
ensured that the problem didn't exist before upgrading and that it was
present once I upgraded.)

I originally saw the problem when multicasting from KVM guests but it
appears to be reproducible from the host itself even with no virtual
machines running:

$ brctl show br0
bridge name     bridge id               STP enabled     interfaces
br0             8000.0025904f1b00       no              eth0

Reportbug has helpfully included the rest of my network configuration
below but let me know if you need more information.

Steps to reproduce using open-mtools:

1. On the host with the bridge run:

 msend 239.192.0.100 5000

2. On another physical machine on the same subnet as the real Ethernet
   device associated with the bridge run:

 mdump 239.192.0.100 5000

When the sender is running 3.2.65-1+deb7u1 or 3.16.7-ckt4-3~bpo70+1
kernels the multicast packets are received. When the sender is running
3.2.65-1+deb7u2 they are not.

For reasons I cannot explain the packets are received if the mDNS
multicast address of 224.0.0.251 is used instead in the recipe above.

Thanks.

Mike.

-- Package-specific info:
** Version:
Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.65-1+deb7u2

** Command line:
BOOT_IMAGE=/vmlinuz-3.2.0-4-amd64 root=/dev/mapper/green-root ro crashkernel=384M console=tty0 console=ttyS0,115200n8 loglevel=8 quiet

** Not tainted

** Kernel log:
[    7.002695] EDAC amd64: MC: 6:     0MB 7:     0MB
[    7.002698] EDAC MC: DCT1 chip selects:
[    7.002701] EDAC amd64: MC: 0:  2048MB 1:  2048MB
[    7.002705] EDAC amd64: MC: 2:  2048MB 3:  2048MB
[    7.002708] EDAC amd64: MC: 4:     0MB 5:     0MB
[    7.002711] EDAC amd64: MC: 6:     0MB 7:     0MB
[    7.002713] EDAC amd64: using x8 syndromes.
[    7.002716] EDAC amd64: MCT channel count: 2
[    7.002743] EDAC amd64: CS0: Registered DDR3 RAM
[    7.002747] EDAC amd64: CS1: Registered DDR3 RAM
[    7.002750] EDAC amd64: CS2: Registered DDR3 RAM
[    7.002753] EDAC amd64: CS3: Registered DDR3 RAM
[    7.002842] EDAC MC0: Giving out device to 'amd64_edac' 'F15h': DEV 0000:00:18.2
[    7.002858] EDAC amd64: DRAM ECC enabled.
[    7.002878] EDAC amd64: F15h detected (node 1).
[    7.002965] EDAC MC: DCT0 chip selects:
[    7.002968] EDAC amd64: MC: 0:  2048MB 1:  2048MB
[    7.002972] EDAC amd64: MC: 2:  2048MB 3:  2048MB
[    7.002975] EDAC amd64: MC: 4:     0MB 5:     0MB
[    7.002978] EDAC amd64: MC: 6:     0MB 7:     0MB
[    7.002981] EDAC MC: DCT1 chip selects:
[    7.002984] EDAC amd64: MC: 0:  2048MB 1:  2048MB
[    7.002986] EDAC amd64: MC: 2:  2048MB 3:  2048MB
[    7.002989] EDAC amd64: MC: 4:     0MB 5:     0MB
[    7.002992] EDAC amd64: MC: 6:     0MB 7:     0MB
[    7.002995] EDAC amd64: using x8 syndromes.
[    7.002997] EDAC amd64: MCT channel count: 2
[    7.003022] EDAC amd64: CS0: Registered DDR3 RAM
[    7.003025] EDAC amd64: CS1: Registered DDR3 RAM
[    7.003028] EDAC amd64: CS2: Registered DDR3 RAM
[    7.003031] EDAC amd64: CS3: Registered DDR3 RAM
[    7.003125] EDAC MC1: Giving out device to 'amd64_edac' 'F15h': DEV 0000:00:19.2
[    7.003185] EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED)
[    7.010732] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[    7.010857] SP5100 TCO timer: mmio address 0xfec000f0 already in use
[    7.046148] ACPI: acpi_idle registered with cpuidle
[    7.273175] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[    7.367429] powernow-k8: Found 2 AMD Opteron(tm) Processor 4386                  (16 cpu cores) (version 2.20.00)
[    7.367477] powernow-k8: Core Performance Boosting: on.
[    7.367593] powernow-k8:    0 : pstate 0 (3100 MHz)
[    7.367597] powernow-k8:    1 : pstate 1 (2700 MHz)
[    7.367600] powernow-k8:    2 : pstate 2 (2200 MHz)
[    7.367603] powernow-k8:    3 : pstate 3 (1800 MHz)
[    7.367606] powernow-k8:    4 : pstate 4 (1400 MHz)
[    7.373277] powernow-k8:    0 : pstate 0 (3100 MHz)
[    7.373282] powernow-k8:    1 : pstate 1 (2700 MHz)
[    7.373286] powernow-k8:    2 : pstate 2 (2200 MHz)
[    7.373289] powernow-k8:    3 : pstate 3 (1800 MHz)
[    7.373292] powernow-k8:    4 : pstate 4 (1400 MHz)
[    7.389512] Error: Driver 'pcspkr' is already registered, aborting...
[    8.558497] kvm: Nested Virtualization enabled
[    8.558509] kvm: Nested Paging enabled
[    9.032875] bio: create slab <bio-1> at 1
[    9.033028] md/raid1:mdX: active with 2 out of 2 mirrors
[    9.046649] created bitmap (4 pages) for device mdX
[    9.108207] mdX: bitmap initialized from disk: read 1/1 pages, set 0 of 8192 bits
[    9.866389] Adding 4194300k swap on /dev/mapper/green-swap.  Priority:-1 extents:1 across:4194300k 
[    9.911515] EXT4-fs (dm-0): re-mounted. Opts: (null)
[   10.861194] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[   10.989925] loop: module loaded
[   13.287920] EXT4-fs (dm-11): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[   13.317132] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null)
[   13.380895] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[   13.405796] EXT4-fs (dm-13): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[   13.528307] EXT4-fs (dm-1): mounted filesystem with writeback data mode. Opts: errors=remount-ro,data=writeback,commit=120
[   14.234156] Bridge firewalling registered
[   14.240653] device eth0 entered promiscuous mode
[   14.322978] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   14.330709] ADDRCONF(NETDEV_UP): br0: link is not ready
[   17.353139] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[   17.355873] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   17.355931] br0: port 1(eth0) entering forwarding state
[   17.355939] br0: port 1(eth0) entering forwarding state
[   17.358310] ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
[   20.101959] RPC: Registered named UNIX socket transport module.
[   20.101964] RPC: Registered udp transport module.
[   20.101968] RPC: Registered tcp transport module.
[   20.101971] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   20.130875] FS-Cache: Loaded
[   20.164600] FS-Cache: Netfs 'nfs' registered for caching
[   20.179601] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   21.540528] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[   21.551214] NFSD: starting 90-second grace period
[   23.891636] Ebtables v2.0 registered
[   23.928289] ip_tables: (C) 2000-2006 Netfilter Core Team
[   23.948805] ip6_tables: (C) 2000-2006 Netfilter Core Team
[19004.573359] tun: Universal TUN/TAP device driver, 1.6
[19004.573364] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[19004.792277] device vnet0 entered promiscuous mode
[19004.830798] br0: port 2(vnet0) entering forwarding state
[19004.830825] br0: port 2(vnet0) entering forwarding state
[19015.360063] vnet0: no IPv6 routers present
[19614.826827] br0: port 2(vnet0) entering forwarding state
[19614.832060] br0: port 2(vnet0) entering disabled state
[19614.832210] device vnet0 left promiscuous mode
[19614.832215] br0: port 2(vnet0) entering disabled state
[27225.564153] device vnet0 entered promiscuous mode
[27225.630734] br0: port 2(vnet0) entering forwarding state
[27225.630760] br0: port 2(vnet0) entering forwarding state
[27235.824060] vnet0: no IPv6 routers present

** Model information
sys_vendor: Supermicro
product_name: H8DCL
product_version: 1234567890
chassis_vendor: Supermicro
chassis_version: 1234567890
bios_vendor: American Megatrends Inc.
bios_version: 2.0a      
board_vendor: Supermicro
board_name: H8DCL
board_version: 1234567890

** Loaded modules:
tun
ip6table_filter
ip6_tables
iptable_filter
ip_tables
ebtable_nat
ebtables
x_tables
autofs4
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
bridge
stp
loop
kvm_amd
kvm
powernow_k8
mperf
crc32c_intel
ghash_clmulni_intel
aesni_intel
snd_pcm
aes_x86_64
snd_page_alloc
snd_timer
evdev
snd
soundcore
processor
aes_generic
sp5100_tco
amd64_edac_mod
i2c_piix4
psmouse
edac_mce_amd
i2c_core
serio_raw
edac_core
k10temp
thermal_sys
cryptd
fam15h_power
pcspkr
button
ext4
crc16
jbd2
mbcache
dm_raid
raid456
async_raid6_recov
async_memcpy
async_pq
async_xor
xor
async_tx
raid6_pq
raid1
dm_mod
md_mod
usbhid
hid
sg
sd_mod
crc_t10dif
ata_generic
pata_marvell
pata_atiixp
ohci_hcd
ahci
libahci
ehci_hcd
libata
usbcore
scsi_mod
e1000e
usb_common

** Network interface configuration:

auto lo
iface lo inet loopback

auto br0
iface br0 inet static
      address 172.30.1.16
      network 172.30.1.0
      broadcast 172.30.1.255
      netmask 255.255.255.0
      gateway 172.30.1.1
      bridge_ports eth0
      bridge_maxwait 0
      bridge_fd 0

iface br0 inet6 auto

** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master br0 state UP qlen 1000
    link/ether 00:25:90:4f:1b:00 brd ff:ff:ff:ff:ff:ff
3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
    link/ether 00:25:90:4f:1b:01 brd ff:ff:ff:ff:ff:ff
4: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP 
    link/ether 00:25:90:4f:1b:00 brd ff:ff:ff:ff:ff:ff
    inet 172.30.1.16/24 brd 172.30.1.255 scope global br0
    inet6 2a00:14f0:e000:80da:225:90ff:fe4f:1b00/64 scope global dynamic 
       valid_lft 86393sec preferred_lft 14393sec
    inet6 fe80::225:90ff:fe4f:1b00/64 scope link 
       valid_lft forever preferred_lft forever
7: vnet0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master br0 state UNKNOWN qlen 500
    link/ether fe:54:00:13:9c:41 brd ff:ff:ff:ff:ff:ff
    inet6 fe80::fc54:ff:fe13:9c41/64 scope link 
       valid_lft forever preferred_lft forever

*** Device statistics:
Inter-|   Receive                                                |  Transmit
 face |bytes    packets errs drop fifo frame compressed multicast|bytes    packets errs drop fifo colls carrier compressed
 vnet0:  851180   11732    0    0    0     0          0         0 42603651   22522    0    0    0     0       0          0
    lo:    4327      65    0    0    0     0          0         0     4327      65    0    0    0     0       0          0
   br0: 239604476 2058682    0    0    0     0          0         0 17853280670 2657166    0    0    0     0       0          0
  eth1:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0
  eth0: 3283353673 3868366    0  927    0     0          0   2332383 18430435775 12294377    0    0    0     0       0          0

*** Protocol statistics:
Ip:
    2003228 total packets received
    86 with invalid addresses
    0 forwarded
    0 incoming packets discarded
    2000577 incoming packets delivered
    2653952 requests sent out
Icmp:
    93 ICMP messages received
    0 input ICMP message failed.
    ICMP input histogram:
        destination unreachable: 3
        echo requests: 90
    592 ICMP messages sent
    0 ICMP messages failed
    ICMP output histogram:
        destination unreachable: 502
        echo replies: 90
IcmpMsg:
        InType3: 3
        InType8: 90
        OutType0: 90
        OutType3: 502
Tcp:
    525 active connections openings
    1652 passive connection openings
    4 failed connection attempts
    450 connection resets received
    5 connections established
    1956590 segments received
    12781456 segments send out
    2050 segments retransmited
    0 bad segments received.
    916 resets sent
Udp:
    12798 packets received
    499 packets to unknown port received.
    0 packet receive errors
    3828 packets sent
UdpLite:
TcpExt:
    448 invalid SYN cookies received
    515 TCP sockets finished time wait in fast timer
    377 delayed acks sent
    23 delayed acks further delayed because of locked socket
    Quick ack mode was activated 76 times
    1548 packets directly queued to recvmsg prequeue.
    2958 bytes directly received in process context from prequeue
    616063 packet headers predicted
    11581 acknowledgments not containing data payload received
    1882018 predicted acknowledgments
    18 times recovered from packet loss by selective acknowledgements
    1 congestion windows recovered without slow start by DSACK
    133 TCP data loss events
    TCPLostRetransmit: 32
    2046 fast retransmits
    3 forward retransmits
    2 other TCP timeouts
    76 DSACKs sent for old packets
    1 DSACKs received
    108 connections reset due to unexpected data
    357 connections reset due to early user close
    TCPSackShifted: 863
    TCPSackMerged: 3240
    TCPSackShiftFallback: 585
IpExt:
    InMcastPkts: 9145
    OutMcastPkts: 239
    InBcastPkts: 30520
    OutBcastPkts: 31
    InOctets: 233686114
    OutOctets: 636071601
    InMcastOctets: 1016979
    OutMcastOctets: 10333
    InBcastOctets: 3417130
    OutBcastOctets: 3844


** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] nee ATI RD890 Northbridge only dual slot (2x16) PCI-e GFX Hydra part [1002:5a10] (rev 02)
	Subsystem: Super Micro Computer Inc Device [15d9:cd11]
	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Capabilities: <access denied>

00:09.0 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI bridge (PCI express gpp port H) [1002:5a1c] (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 00009000-00009fff
	Memory behind bridge: fe800000-fe8fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:0a.0 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI bridge (external gfx1 port A) [1002:5a1d] (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: 0000a000-0000afff
	Memory behind bridge: fe900000-fe9fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:0d.0 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI bridge (external gfx1 port B) [1002:5a1e] (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	I/O behind bridge: 0000b000-0000efff
	Memory behind bridge: fea00000-feafffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:11.0 SATA controller [0106]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode] [1002:4390] (prog-if 01 [AHCI 1.0])
	Subsystem: Super Micro Computer Inc Device [15d9:cd11]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 22
	Region 0: I/O ports at 8000 [size=8]
	Region 1: I/O ports at 7000 [size=4]
	Region 2: I/O ports at 6000 [size=8]
	Region 3: I/O ports at 5000 [size=4]
	Region 4: I/O ports at 3000 [size=16]
	Region 5: Memory at febfbc00 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ahci

00:12.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
	Subsystem: Super Micro Computer Inc Device [15d9:cd11]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at febf9000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci_hcd

00:12.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI])
	Subsystem: Super Micro Computer Inc Device [15d9:cd11]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at febfa000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci_hcd

00:12.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
	Subsystem: Super Micro Computer Inc Device [15d9:cd11]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 17
	Region 0: Memory at febfb800 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:13.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
	Subsystem: Super Micro Computer Inc Device [15d9:cd11]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 18
	Region 0: Memory at febf7000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci_hcd

00:13.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI])
	Subsystem: Super Micro Computer Inc Device [15d9:cd11]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 18
	Region 0: Memory at febf8000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci_hcd

00:13.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
	Subsystem: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 19
	Region 0: Memory at febfb400 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller [1002:4385] (rev 3d)
	Subsystem: Super Micro Computer Inc Device [15d9:cd11]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: <access denied>
	Kernel driver in use: piix4_smbus

00:14.1 IDE interface [0101]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 IDE Controller [1002:439c] (prog-if 8a [Master SecP PriP])
	Subsystem: Super Micro Computer Inc Device [15d9:cd11]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64
	Interrupt: pin A routed to IRQ 16
	Region 0: I/O ports at 01f0 [size=8]
	Region 1: I/O ports at 03f4 [size=1]
	Region 2: I/O ports at 0170 [size=8]
	Region 3: I/O ports at 0374 [size=1]
	Region 4: I/O ports at ff00 [size=16]
	Capabilities: <access denied>
	Kernel driver in use: pata_atiixp

00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d]
	Subsystem: Super Micro Computer Inc Device [15d9:cd11]
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0

00:14.4 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=64
	Memory behind bridge: fdf00000-fe7fffff
	Prefetchable memory behind bridge: fc000000-fcffffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:14.5 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI])
	Subsystem: Advanced Micro Devices [AMD] nee ATI Device [1002:4396]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 64 bytes
	Interrupt: pin C routed to IRQ 18
	Region 0: Memory at febf6000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci_hcd

00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 15h Processor Function 0 [1022:1600]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: <access denied>

00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 15h Processor Function 1 [1022:1601]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 15h Processor Function 2 [1022:1602]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Kernel driver in use: amd64_edac

00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 15h Processor Function 3 [1022:1603]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: <access denied>
	Kernel driver in use: k10temp

00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 15h Processor Function 4 [1022:1604]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Kernel driver in use: fam15h_power

00:18.5 Host bridge [0600]: Advanced Micro Devices [AMD] Family 15h Processor Function 5 [1022:1605]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:19.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 15h Processor Function 0 [1022:1600]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: <access denied>

00:19.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 15h Processor Function 1 [1022:1601]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:19.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 15h Processor Function 2 [1022:1602]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Kernel driver in use: amd64_edac

00:19.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 15h Processor Function 3 [1022:1603]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: <access denied>
	Kernel driver in use: k10temp

00:19.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 15h Processor Function 4 [1022:1604]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: <access denied>
	Kernel driver in use: fam15h_power

00:19.5 Host bridge [0600]: Advanced Micro Devices [AMD] Family 15h Processor Function 5 [1022:1605]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

01:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network Connection [8086:10d3]
	Subsystem: Super Micro Computer Inc Device [15d9:0000]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 17
	Region 0: Memory at fe8e0000 (32-bit, non-prefetchable) [size=128K]
	Region 2: I/O ports at 9800 [size=32]
	Region 3: Memory at fe8dc000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: e1000e

02:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network Connection [8086:10d3]
	Subsystem: Super Micro Computer Inc Device [15d9:0000]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 18
	Region 0: Memory at fe9e0000 (32-bit, non-prefetchable) [size=128K]
	Region 2: I/O ports at a800 [size=32]
	Region 3: Memory at fe9dc000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: e1000e

03:00.0 SATA controller [0106]: Marvell Technology Group Ltd. 88SE9123 PCIe SATA 6.0 Gb/s controller [1b4b:9123] (rev 11) (prog-if 01 [AHCI 1.0])
	Subsystem: Marvell Technology Group Ltd. 88SE9123 PCIe SATA 6.0 Gb/s controller [1b4b:9123]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 43
	Region 0: I/O ports at c000 [size=8]
	Region 1: I/O ports at b800 [size=4]
	Region 2: I/O ports at d000 [size=8]
	Region 3: I/O ports at c800 [size=4]
	Region 4: I/O ports at c400 [size=16]
	Region 5: Memory at feacf800 (32-bit, non-prefetchable) [size=2K]
	Expansion ROM at fead0000 [disabled] [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: ahci

03:00.1 IDE interface [0101]: Marvell Technology Group Ltd. 88SE9128 IDE Controller [1b4b:91a4] (rev 11) (prog-if 8f [Master SecP SecO PriP PriO])
	Subsystem: Marvell Technology Group Ltd. 88SE9128 IDE Controller [1b4b:91a4]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 18
	Region 0: I/O ports at d400 [size=8]
	Region 1: I/O ports at e800 [size=4]
	Region 2: I/O ports at e400 [size=8]
	Region 3: I/O ports at e000 [size=4]
	Region 4: I/O ports at d800 [size=16]
	Region 5: Memory at feaefc00 (32-bit, non-prefetchable) [size=16]
	Expansion ROM at feaf0000 [disabled] [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: pata_marvell

04:04.0 VGA compatible controller [0300]: Matrox Electronics Systems Ltd. MGA G200eW WPCM450 [102b:0532] (rev 0a) (prog-if 00 [VGA controller])
	Subsystem: Super Micro Computer Inc Device [15d9:cd11]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (4000ns min, 8000ns max), Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 7
	Region 0: Memory at fc000000 (32-bit, prefetchable) [size=16M]
	Region 1: Memory at fdffc000 (32-bit, non-prefetchable) [size=16K]
	Region 2: Memory at fe000000 (32-bit, non-prefetchable) [size=8M]
	Expansion ROM at <unassigned> [disabled]
	Capabilities: <access denied>


** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 051d:0002 American Power Conversion Uninterruptible Power Supply


-- System Information:
Debian Release: 7.8
  APT prefers stable-updates
  APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.2.0-4-amd64 (SMP w/16 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-3.2.0-4-amd64 depends on:
ii  debconf [debconf-2.0]                   1.5.49
ii  initramfs-tools [linux-initramfs-tool]  0.109.1
ii  kmod                                    9-3
ii  linux-base                              3.5
ii  module-init-tools                       9-3

Versions of packages linux-image-3.2.0-4-amd64 recommends:
pn  firmware-linux-free  <none>

Versions of packages linux-image-3.2.0-4-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  grub-pc                 1.99-27+deb7u2
pn  linux-doc-3.2           <none>

Versions of packages linux-image-3.2.0-4-amd64 is related to:
pn  firmware-atheros        <none>
pn  firmware-bnx2           <none>
pn  firmware-bnx2x          <none>
pn  firmware-brcm80211      <none>
pn  firmware-intelwimax     <none>
pn  firmware-ipw2x00        <none>
pn  firmware-ivtv           <none>
pn  firmware-iwlwifi        <none>
pn  firmware-libertas       <none>
pn  firmware-linux          <none>
pn  firmware-linux-nonfree  <none>
pn  firmware-myricom        <none>
pn  firmware-netxen         <none>
pn  firmware-qlogic         <none>
pn  firmware-ralink         <none>
pn  firmware-realtek        <none>
pn  xen-hypervisor          <none>

-- debconf information:
  linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64: false
  linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64: true
  linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk:
  linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64:

--- End Message ---
--- Begin Message ---
Hi

This bug was filed for a very old kernel or the bug is old itself
without resolution.

If you can reproduce it with

- the current version in unstable/testing
- the latest kernel from backports

please reopen the bug, see https://www.debian.org/Bugs/server-control
for details.

Regards,
Salvatore

--- End Message ---

Reply to: