--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-3.2.0-4-686-pae: When loading sch5627.ko, no watchdog device is generated (BIOS watchdog activated)
- From: AST <ast-70@web.de>
- Date: Wed, 21 Jan 2015 16:53:57 +0100
- Message-id: <20150121155357.2969.26377.reportbug@Deb7Fuj>
Package: src:linux
Version: 3.2.63-2+deb7u2
Severity: normal
I have got a Fujitsu 3313-S2 board trying to get the hw watchdog running
together with the watchdog mechanism from Debian.
I did enable the hw watchdog within the BIOS. So, not having a trigger
to reset the watchdog, the hardware is doing its reboot as expected.
When I do load the sch5627 during boot up using /dev/modules, I can see
a message within (dmesg: sch5627: found sch5627 chip at 0x640).
Eveything looks fine, but checking my existing devices, there has no
/dev/watchdog been registered.
Doing the same stuff with Ubuntu (14.10), loading the sch5627.ko immediatly
creates /dev/watchdog and /dev/watchdog0.
Configuring /etc/watchdog.conf (watchdog-device = /dev/watchdog) and checking
wd_identify, clearly points out the right device (sch56xx watchdog).
I found some information, that the sch5627 is supported since 2.6.39.
And the sch5636 since kernel 3.1.
Using kernel version 3.2. I did not expect to face this kind of problem
with Debian7.
So I wonder what I still can do to get the Debian watchdog mechanism running.
Regards,
A.ST.
-- Package-specific info:
** Version:
Linux version 3.2.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.63-2+deb7u2
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-686-pae root=UUID=411f9a24-0bea-432b-9162-242463fa27ae ro quiet text
** Tainted: PO (4097)
* Proprietary module has been loaded.
* Out-of-tree module has been loaded.
** Kernel log:
[ 2.977398] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb5/5-3/5-3:1.0/input/input0
[ 2.977546] generic-usb 0003:046D:C03D.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:12.0-3/input0
[ 2.984486] input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb5/5-4/5-4:1.0/input/input1
[ 2.984591] generic-usb 0003:03F0:0024.0002: input,hidraw1: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:12.0-4/input0
[ 2.984622] usbcore: registered new interface driver usbhid
[ 2.984625] usbhid: USB HID core driver
[ 2.990753] scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SE-208AB TS03 PQ: 0 ANSI: 0
[ 2.992160] scsi 2:0:0:0: Attached scsi generic sg1 type 5
[ 3.005136] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.005144] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.005392] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 3.189794] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[ 3.189800] EXT4-fs (sda1): write access will be enabled during recovery
[ 3.251199] EXT4-fs (sda1): recovery complete
[ 3.252072] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.656882] udevd[357]: starting version 175
[ 3.812286] ACPI: acpi_idle registered with cpuidle
[ 3.814092] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 3.814104] ACPI: Power Button [PWRB]
[ 3.823182] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 3.823192] ACPI: Power Button [PWRF]
[ 3.831112] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 3.848553] acpi device:01: registered as cooling_device2
[ 3.848670] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ 3.848681] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 3.911134] input: Fujitsu FUJ02E3 as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:10/FUJ02E3:00/input/input5
[ 3.911149] fujitsu_laptop: ACPI: Fujitsu FUJ02E3 [FEXT] (on)
[ 3.912087] fujitsu_laptop: BTNI: [0x0]
[ 3.912660] fujitsu_laptop: driver 0.6.0 successfully loaded
[ 3.960428] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 3.960434] Disabling lock debugging due to kernel taint
[ 4.004595] snd_hda_intel 0000:00:01.1: irq 80 for MSI/MSI-X
[ 4.004636] snd_hda_intel 0000:00:01.1: setting latency timer to 64
[ 4.006885] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 4.186902] powernow-k8: Found 1 AMD GX-217GA SOC with Radeon(tm) HD Graphics (2 cpu cores) (version 2.20.00)
[ 4.187003] powernow-k8: 0 : pstate 0 (1650 MHz)
[ 4.187007] powernow-k8: 1 : pstate 1 (1500 MHz)
[ 4.187011] powernow-k8: 2 : pstate 2 (1350 MHz)
[ 4.187014] powernow-k8: 3 : pstate 3 (1200 MHz)
[ 4.187017] powernow-k8: 4 : pstate 4 (1000 MHz)
[ 4.187020] powernow-k8: 5 : pstate 5 (800 MHz)
[ 4.361083] [fglrx] Maximum main memory to use for locked dma buffers: 1343 MBytes.
[ 4.361146] [fglrx] vendor: 1002 device: 9837 revision: 0 count: 1
[ 4.363069] [fglrx] ioport: bar 4, base 0xf000, size: 0x100
[ 4.363112] pci 0000:00:01.0: setting latency timer to 64
[ 4.363823] [fglrx] Kernel PAT support is enabled
[ 4.363858] [fglrx] module loaded - fglrx 14.50.2 [Nov 20 2014] with 1 minors
[ 4.543559] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 4.543642] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 4.543935] input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/sound/card1/input7
[ 4.544291] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card1/input8
[ 4.601206] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 8.027523] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 8.107811] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 8.144188] sch5627: found sch5627 chip at 0x640
[ 8.144194] sch5627: firmware build: code 0x0D, id 0x001B, hwmon: rev 0x01
[ 8.163867] loop: module loaded
[ 9.151882] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 10.060461] RPC: Registered named UNIX socket transport module.
[ 10.060472] RPC: Registered udp transport module.
[ 10.060478] RPC: Registered tcp transport module.
[ 10.060485] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 10.074041] FS-Cache: Loaded
[ 10.095401] FS-Cache: Netfs 'nfs' registered for caching
[ 10.108384] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 10.220686] r8169 0000:01:00.0: eth0: link down
[ 10.220960] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 10.232729] r8169 0000:02:00.0: eth1: link down
[ 10.232742] r8169 0000:02:00.0: eth1: link down
[ 10.233059] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 11.624133] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 12.921477] [fglrx] Try to set gart size 1039M failed, should be within 64M and 932M. Discard the setting.
[ 13.095921] fglrx_pci 0000:00:01.0: irq 81 for MSI/MSI-X
[ 13.098073] [fglrx] Firegl kernel thread PID: 2722
[ 13.098247] [fglrx] Firegl kernel thread PID: 2723
[ 13.098407] [fglrx] Firegl kernel thread PID: 2724
[ 13.098620] [fglrx] IRQ 81 Enabled
[ 13.117051] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 13.117057] [fglrx] Reserved FB block: Unshared offset:fdc9000, size:3000
[ 13.117061] [fglrx] Reserved FB block: Unshared offset:fdcc000, size:234000
[ 13.117066] [fglrx] Reserved FB block: Unshared offset:1ffdc000, size:24000
[ 13.434449] r8169 0000:02:00.0: eth1: link up
[ 13.434702] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 13.483228] [fglrx] ATIF platform detected with notification ID: 0x81
[ 15.117593] HDMI hot plug event: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=0
[ 15.117616] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 15.117665] HDMI hot plug event: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=1
[ 15.117680] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 15.416370] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 15.716113] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 16.016140] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 16.316123] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 16.616066] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 16.656113] fuse init (API version 7.17)
[ 16.916048] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 17.216083] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 17.516088] HDMI status: Codec=0 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 18.964338] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 19.277846] ISOFS: changing to secondary root
[ 23.600205] eth1: no IPv6 routers present
** Model information
not available
** Loaded modules:
nls_utf8
isofs
fuse
binfmt_misc
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
loop
sch5627
sch56xx_common
snd_hda_codec_realtek
snd_hda_codec_hdmi
fglrx(P)
powernow_k8
mperf
psmouse
serio_raw
i2c_piix4
i2c_core
crc32c_intel
aesni_intel
aes_i586
aes_generic
cryptd
pcspkr
fam15h_power
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_pcm_oss
snd_mixer_oss
snd_pcm
snd_page_alloc
snd_seq_midi
snd_seq_midi_event
evdev
snd_rawmidi
snd_seq
snd_seq_device
snd_timer
fujitsu_laptop
snd
soundcore
video
button
processor
thermal_sys
ext4
crc16
jbd2
mbcache
sr_mod
cdrom
usbhid
hid
sg
sd_mod
crc_t10dif
usb_storage
ohci_hcd
ahci
libahci
xhci_hcd
libata
ehci_hcd
r8169
mii
usbcore
scsi_mod
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 16h Processor Root Complex [1022:1536]
Subsystem: Fujitsu Technology Solutions Device [1734:1202]
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:01.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Device [1002:9837] (prog-if 00 [VGA controller])
Subsystem: Fujitsu Technology Solutions Device [1734:1202]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 81
Region 0: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=8M]
Region 4: I/O ports at f000 [size=256]
Region 5: Memory at feb00000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at feb40000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: fglrx_pci
00:01.1 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI Device [1002:9840]
Subsystem: Fujitsu Technology Solutions Device [1734:1202]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 80
Region 0: Memory at feb64000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:02.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 16h Processor Function 0 [1022:1538]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:02.2 PCI bridge [0604]: Advanced Micro Devices [AMD] Family 16h Processor Functions 5:1 [1022:1439] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fea00000-feafffff
Prefetchable memory behind bridge: 00000000d0900000-00000000d09fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:02.3 PCI bridge [0604]: Advanced Micro Devices [AMD] Family 16h Processor Functions 5:1 [1022:1439] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fe900000-fe9fffff
Prefetchable memory behind bridge: 00000000d0800000-00000000d08fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:10.0 USB controller [0c03]: Advanced Micro Devices [AMD] FCH USB XHCI Controller [1022:7814] (rev 01) (prog-if 30 [XHCI])
Subsystem: Fujitsu Technology Solutions Device [1734:1202]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at feb68000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
00:11.0 SATA controller [0106]: Advanced Micro Devices [AMD] FCH SATA Controller [AHCI mode] [1022:7801] (rev 40) (prog-if 01 [AHCI 1.0])
Subsystem: Fujitsu Technology Solutions Device [1734:1202]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 79
Region 0: I/O ports at f140 [size=8]
Region 1: I/O ports at f130 [size=4]
Region 2: I/O ports at f120 [size=8]
Region 3: I/O ports at f110 [size=4]
Region 4: I/O ports at f100 [size=16]
Region 5: Memory at feb6e000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:12.0 USB controller [0c03]: Advanced Micro Devices [AMD] FCH USB OHCI Controller [1022:7807] (rev 39) (prog-if 10 [OHCI])
Subsystem: Fujitsu Technology Solutions Device [1734:1202]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at feb6d000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:12.2 USB controller [0c03]: Advanced Micro Devices [AMD] FCH USB EHCI Controller [1022:7808] (rev 39) (prog-if 20 [EHCI])
Subsystem: Fujitsu Technology Solutions Device [1734:1202]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at feb6c000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:13.0 USB controller [0c03]: Advanced Micro Devices [AMD] FCH USB OHCI Controller [1022:7807] (rev 39) (prog-if 10 [OHCI])
Subsystem: Fujitsu Technology Solutions Device [1734:1202]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at feb6b000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.2 USB controller [0c03]: Advanced Micro Devices [AMD] FCH USB EHCI Controller [1022:7808] (rev 39) (prog-if 20 [EHCI])
Subsystem: Fujitsu Technology Solutions Device [1734:1202]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at feb6a000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] FCH SMBus Controller [1022:780b] (rev 3a)
Subsystem: Fujitsu Technology Solutions Device [1734:1202]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: piix4_smbus
00:14.2 Audio device [0403]: Advanced Micro Devices [AMD] FCH Azalia Controller [1022:780d] (rev 02)
Subsystem: Fujitsu Technology Solutions Device [1734:1203]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at feb60000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] FCH LPC Bridge [1022:780e] (rev 11)
Subsystem: Fujitsu Technology Solutions Device [1734:1202]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 16h Processor Function 0 [1022:1530]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 16h Processor Function 1 [1022:1531]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 16h Processor Function 2 [1022:1532]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 16h Processor Function 3 [1022:1533]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 16h Processor Function 4 [1022:1534]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: fam15h_power
00:18.5 Host bridge [0600]: Advanced Micro Devices [AMD] Family 16h Processor Function 5 [1022:1535]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 0c)
Subsystem: Fujitsu Technology Solutions Device [1734:11ff]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 74
Region 0: I/O ports at e000 [size=256]
Region 2: Memory at fea00000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at d0900000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 0c)
Subsystem: Fujitsu Technology Solutions Device [1734:11ff]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 75
Region 0: I/O ports at d000 [size=256]
Region 2: Memory at fe900000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at d0800000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0e8d:1806 MediaTek Inc.
Bus 005 Device 002: ID 046d:c03d Logitech, Inc. M-BT96a Pilot Optical Mouse
Bus 005 Device 003: ID 03f0:0024 Hewlett-Packard KU-0316 Keyboard
-- System Information:
Debian Release: 7.7
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 3.2.0-4-686-pae (SMP w/2 CPU cores)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-4-686-pae depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.109.1
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.2.0-4-686-pae recommends:
pn firmware-linux-free <none>
pn libc6-i686 <none>
Versions of packages linux-image-3.2.0-4-686-pae suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-27+deb7u2
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-4-686-pae is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
ii firmware-realtek 0.36+wheezy.1
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-4-686-pae/postinst/depmod-error-initrd-3.2.0-4-686-pae: false
linux-image-3.2.0-4-686-pae/prerm/removing-running-kernel-3.2.0-4-686-pae: true
linux-image-3.2.0-4-686-pae/postinst/ignoring-ramdisk:
linux-image-3.2.0-4-686-pae/postinst/missing-firmware-3.2.0-4-686-pae:
--- End Message ---