[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#773193: marked as done (Trackpoint not working on IBM Thinkpad T42)



Your message dated Sat, 08 May 2021 08:18:45 -0700 (PDT)
with message-id <6096abd5.1c69fb81.cca0b.c79b@mx.google.com>
and subject line Closing this bug (BTS maintenance for src:linux bugs)
has caused the Debian Bug report #773193,
regarding Trackpoint not working on IBM Thinkpad T42
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
773193: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=773193
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: linux-image-3.16.0-4-586
Version: 3.16.7-2

Dear Maintainers,

Using an IBM Thinkpad T42 with Jessie, the trackpoint does not seem to
be fully detected, and so I can't use it :

I can see it with "dmidecode -t 21" :
# dmidecode 2.12
SMBIOS version fixup (2.33 -> 2.3).
SMBIOS 2.3 present.

Handle 0x0033, DMI type 21, 7 bytes
Built-in Pointing Device
	Type: Track Point
	Interface: PS/2
	Buttons: 3

Handle 0x0034, DMI type 21, 7 bytes
Built-in Pointing Device
	Type: Touch Pad
	Interface: PS/2
	Buttons: 0


But it is not listed in /proc/bus/input/devices :
I: Bus=0011 Vendor=0001 Product=0001 Version=ab54
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
S: Sysfs=/devices/platform/i8042/serio0/input/input0
U: Uniq=
H: Handlers=sysrq kbd event0 
B: PROP=0
B: EV=120013
B: KEY=4 2000000 3803078 f800d001 feffffdf ffefffff ffffffff fffffffe
B: MSC=10
B: LED=7

I: Bus=0019 Vendor=0000 Product=0005 Version=0000
N: Name="Lid Switch"
P: Phys=PNP0C0D/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
U: Uniq=
H: Handlers=event1 
B: PROP=0
B: EV=21
B: SW=1

I: Bus=0019 Vendor=0000 Product=0003 Version=0000
N: Name="Sleep Button"
P: Phys=PNP0C0E/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
U: Uniq=
H: Handlers=kbd event2 
B: PROP=0
B: EV=3
B: KEY=4000 0 0 0 0

I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
U: Uniq=
H: Handlers=kbd event3 
B: PROP=0
B: EV=3
B: KEY=100000 0 0 0

I: Bus=0019 Vendor=1014 Product=5054 Version=4101
N: Name="ThinkPad Extra Buttons"
P: Phys=thinkpad_acpi/input0
S: Sysfs=/devices/platform/thinkpad_acpi/input/input5
U: Uniq=
H: Handlers=kbd rfkill event4 
B: PROP=0
B: EV=13
B: KEY=18840000 0 0 100000 0 0 0 1501b 2004 0 1104000 e0000 0 0 0
B: MSC=10

I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=LNXVIDEO/video/input0
S:
Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:02/LNXVIDEO:00/input/input6
U: Uniq=
H: Handlers=kbd event5 
B: PROP=0
B: EV=3
B: KEY=3e000b 0 0 0 0 0 0 0

I: Bus=0011 Vendor=0002 Product=0007 Version=2cb1
N: Name="SynPS/2 Synaptics TouchPad"
P: Phys=isa0060/serio1/input0
S: Sysfs=/devices/platform/i8042/serio1/input/input7
U: Uniq=
H: Handlers=mouse0 event6 
B: PROP=1
B: EV=b
B: KEY=6420 0 30000 0 0 0 0 0 0 0 0
B: ABS=11000003


Maybe there is something I should change to activate it, but I don't
know what : I already tried to enable and to disable it in the BIOS (as
suggested on some forums), with no result.

I am almost sure it was working perfectly with previous versions of the
kernel : I will try and let you know.

Thanks for your time and work,
YvanM

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.16.0-4-586 (debian-kernel@lists.debian.org) (gcc version 4.8.3 (Debian 4.8.3-13) ) #1 Debian 3.16.7-2 (2014-11-06)
[    0.000000] Disabled fast string operations
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000002ff5ffff] usable
[    0.000000] BIOS-e820: [mem 0x000000002ff60000-0x000000002ff76fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000002ff77000-0x000000002ff78fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000002ff80000-0x000000002fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[    0.000000] SMBIOS 2.3 present.
[    0.000000] DMI: IBM 23744WG/23744WG, BIOS 1RETDRWW (3.23 ) 06/18/2007
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x2ff60 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DBFFF uncachable
[    0.000000]   DC000-DFFFF write-back
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FE0000000 write-back
[    0.000000]   1 base 020000000 mask FF0000000 write-back
[    0.000000]   2 base 02FF80000 mask FFFF80000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] PAT not supported by CPU.
[    0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x2f800000-0x2fbfffff]
[    0.000000]  [mem 0x2f800000-0x2fbfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x28000000-0x2f7fffff]
[    0.000000]  [mem 0x28000000-0x2f7fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x27ffffff]
[    0.000000]  [mem 0x00100000-0x003fffff] page 4k
[    0.000000]  [mem 0x00400000-0x27ffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x2fc00000-0x2ff5ffff]
[    0.000000]  [mem 0x2fc00000-0x2ff5ffff] page 4k
[    0.000000] BRK [0x01715000, 0x01715fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x2e316000-0x2f10afff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000F6D70 000024 (v02 IBM   )
[    0.000000] ACPI: XSDT 0x2FF6A672 00004C (v01 IBM    TP-1R    00003230  LTP 00000000)
[    0.000000] ACPI: FACP 0x2FF6A700 0000F4 (v03 IBM    TP-1R    00003230 IBM  00000001)
[    0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20140424/tbfadt-618)
[    0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe1Block: 0/32 (20140424/tbfadt-618)
[    0.000000] ACPI BIOS Warning (bug): Optional FADT field Gpe1Block has zero address or length: 0x000000000000102C/0x0 (20140424/tbfadt-649)
[    0.000000] ACPI: DSDT 0x2FF6A8E7 00C530 (v01 IBM    TP-1R    00003230 MSFT 0100000E)
[    0.000000] ACPI: FACS 0x2FF78000 000040
[    0.000000] ACPI: SSDT 0x2FF6A8B4 000033 (v01 IBM    TP-1R    00003230 MSFT 0100000E)
[    0.000000] ACPI: ECDT 0x2FF76E17 000052 (v01 IBM    TP-1R    00003230 IBM  00000001)
[    0.000000] ACPI: TCPA 0x2FF76E69 000032 (v01 IBM    TP-1R    00003230 PTL  00000001)
[    0.000000] ACPI: BOOT 0x2FF76FD8 000028 (v01 IBM    TP-1R    00003230  LTP 00000001)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 767MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 2ff60000
[    0.000000]   low ram: 0 - 2ff60000
[    0.000000] BRK [0x01716000, 0x01716fff] PGTABLE
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x2ff5ffff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x2ff5ffff]
[    0.000000] On node 0 totalpages: 196350
[    0.000000] free_area_init_node: node 0, pgdat c15ed240, node_mem_map ef960020
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 1503 pages used for memmap
[    0.000000]   Normal zone: 192352 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[    0.000000] APIC: disable apic facility
[    0.000000] APIC: switched to apic NOOP
[    0.000000] nr_irqs_gsi: 16
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dbfff]
[    0.000000] PM: Registered nosave memory: [mem 0x000dc000-0x000fffff]
[    0.000000] e820: [mem 0x30000000-0xff7fffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 194815
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-586 root=UUID=983d08df-346f-4685-9bf9-6b952ad56e59 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (00000000:00000000)
[    0.000000] Memory: 756780K/785400K available (4240K kernel code, 501K rwdata, 1384K rodata, 668K init, 412K bss, 28620K reserved, 0K highmem)
[    0.000000] virtual kernel memory layout:
    fixmap  : 0xfffa2000 - 0xfffff000   ( 372 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf0760000 - 0xff7fe000   ( 240 MB)
    lowmem  : 0xc0000000 - 0xeff60000   ( 767 MB)
      .init : 0xc15ff000 - 0xc16a6000   ( 668 kB)
      .data : 0xc142458a - 0xc15fd680   (1892 kB)
      .text : 0xc1000000 - 0xc142458a   (4241 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] NR_IRQS:2304 nr_irqs:256 16
[    0.000000] CPU 0 irqstacks, hard=ef406000 soft=ef408000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] tsc: Fast TSC calibration failed
[    0.000000] tsc: PIT calibration matches PMTIMER. 1 loops
[    0.000000] tsc: Detected 1698.550 MHz processor
[    0.012012] Calibrating delay loop (skipped), value calculated using timer frequency.. 3397.10 BogoMIPS (lpj=6794200)
[    0.012017] pid_max: default: 32768 minimum: 301
[    0.012035] ACPI: Core revision 20140424
[    0.029867] ACPI: All ACPI Tables successfully acquired
[    0.029875] ACPI: setting ELCR to 0200 (from 0820)
[    0.032032] Security Framework initialized
[    0.032057] AppArmor: AppArmor disabled by boot time parameter
[    0.032060] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.036005] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.036008] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.036367] Initializing cgroup subsys memory
[    0.036376] Initializing cgroup subsys devices
[    0.036387] Initializing cgroup subsys freezer
[    0.036392] Initializing cgroup subsys net_cls
[    0.036400] Initializing cgroup subsys blkio
[    0.036406] Initializing cgroup subsys perf_event
[    0.036409] Initializing cgroup subsys net_prio
[    0.036440] Disabled fast string operations
[    0.036460] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8, 1GB 0
tlb_flushall_shift: 6
[    0.036464] CPU: Intel(R) Pentium(R) M processor 1.70GHz (fam: 06, model: 0d, stepping: 06)
[    0.038660] ftrace: allocating 19629 entries in 39 pages
[    0.048136] Performance Events: 
[    0.048146] no APIC, boot with the "lapic" boot parameter to force-enable it.
[    0.048150] no hardware sampling interrupt available.
[    0.048153] p6 PMU driver.
[    0.048158] ... version:                0
[    0.048160] ... bit width:              32
[    0.048162] ... generic registers:      2
[    0.048164] ... value mask:             00000000ffffffff
[    0.048167] ... max period:             000000007fffffff
[    0.048169] ... fixed-purpose events:   0
[    0.048171] ... event mask:             0000000000000003
[    0.052573] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.052697] devtmpfs: initialized
[    0.052970] PM: Registering ACPI NVS region [mem 0x2ff77000-0x2ff78fff] (8192 bytes)
[    0.054716] pinctrl core: initialized pinctrl subsystem
[    0.054819] NET: Registered protocol family 16
[    0.054993] EISA bus registered
[    0.054998] cpuidle: using governor ladder
[    0.055002] cpuidle: using governor menu
[    0.055115] ACPI: bus type PCI registered
[    0.055119] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.055396] PCI: PCI BIOS revision 2.10 entry at 0xfd8d6, last bus=8
[    0.055399] PCI: Using configuration type 1 for base access
[    0.056683] ACPI: Added _OSI(Module Device)
[    0.056687] ACPI: Added _OSI(Processor Device)
[    0.056690] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.056692] ACPI: Added _OSI(Processor Aggregator Device)
[    0.058087] ACPI : EC: EC description table is found, configuring boot EC
[    0.064971] ACPI: Interpreter enabled
[    0.064985] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[    0.064991] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.065011] ACPI: (supports S0 S3 S4 S5)
[    0.065013] ACPI: Using PIC for interrupt routing
[    0.065038] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.068924] ACPI: Power Resource [PUBS] (on)
[    0.072155] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1)
[    0.073310] acpi LNXDOCK:00: ACPI dock station (docks/bays count: 2)
[    0.074341] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 3)
[    0.076782] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[    0.076938] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11)
[    0.077090] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[    0.077242] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[    0.077355] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[    0.077467] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[    0.077579] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[    0.077732] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[    0.077881] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.077881] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[    0.077881] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.077881] acpi PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.077881] acpi PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.077881] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.077881] acpi PNP0A03:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
[    0.077881] acpi PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[    0.077881] acpi PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[    0.077881] acpi PNP0A03:00: host bridge window [mem 0x30000000-0xfebfffff] (ignored)
[    0.077881] PCI: root bus 00: using default resources
[    0.077881] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.077881] PCI host bridge to bus 0000:00
[    0.077881] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.077881] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.077881] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[    0.077881] pci 0000:00:00.0: [8086:3340] type 00 class 0x060000
[    0.077881] pci 0000:00:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref]
[    0.077881] pci 0000:00:01.0: [8086:3341] type 01 class 0x060400
[    0.077881] pci 0000:00:1d.0: [8086:24c2] type 00 class 0x0c0300
[    0.077881] pci 0000:00:1d.0: reg 0x20: [io  0x1800-0x181f]
[    0.077881] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.077881] pci 0000:00:1d.1: [8086:24c4] type 00 class 0x0c0300
[    0.077881] pci 0000:00:1d.1: reg 0x20: [io  0x1820-0x183f]
[    0.077881] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    0.077881] pci 0000:00:1d.2: [8086:24c7] type 00 class 0x0c0300
[    0.077881] pci 0000:00:1d.2: reg 0x20: [io  0x1840-0x185f]
[    0.077881] pci 0000:00:1d.7: [8086:24cd] type 00 class 0x0c0320
[    0.077881] pci 0000:00:1d.7: reg 0x10: [mem 0xc0000000-0xc00003ff]
[    0.080081] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.080185] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060400
[    0.080252] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.080321] pci 0000:00:1f.0: [8086:24cc] type 00 class 0x060100
[    0.080387] pci 0000:00:1f.0: can't claim BAR 13 [io  0x1000-0x107f]: address conflict with ACPI CPU throttle [io  0x1010-0x1015]
[    0.080394] pci 0000:00:1f.0: quirk: [io  0x1180-0x11bf] claimed by ICH4 GPIO
[    0.080483] pci 0000:00:1f.1: [8086:24ca] type 00 class 0x01018a
[    0.080498] pci 0000:00:1f.1: reg 0x10: [io  0x0000-0x0007]
[    0.080509] pci 0000:00:1f.1: reg 0x14: [io  0x0000-0x0003]
[    0.080520] pci 0000:00:1f.1: reg 0x18: [io  0x0000-0x0007]
[    0.080531] pci 0000:00:1f.1: reg 0x1c: [io  0x0000-0x0003]
[    0.080542] pci 0000:00:1f.1: reg 0x20: [io  0x1860-0x186f]
[    0.080554] pci 0000:00:1f.1: reg 0x24: [mem 0x00000000-0x000003ff]
[    0.080568] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.080571] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.080575] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.080578] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.080669] pci 0000:00:1f.3: [8086:24c3] type 00 class 0x0c0500
[    0.080713] pci 0000:00:1f.3: reg 0x20: [io  0x1880-0x189f]
[    0.080818] pci 0000:00:1f.5: [8086:24c5] type 00 class 0x040100
[    0.080835] pci 0000:00:1f.5: reg 0x10: [io  0x1c00-0x1cff]
[    0.080845] pci 0000:00:1f.5: reg 0x14: [io  0x18c0-0x18ff]
[    0.080856] pci 0000:00:1f.5: reg 0x18: [mem 0xc0000c00-0xc0000dff]
[    0.080866] pci 0000:00:1f.5: reg 0x1c: [mem 0xc0000800-0xc00008ff]
[    0.080912] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[    0.081009] pci 0000:00:1f.6: [8086:24c6] type 00 class 0x070300
[    0.081025] pci 0000:00:1f.6: reg 0x10: [io  0x2400-0x24ff]
[    0.081036] pci 0000:00:1f.6: reg 0x14: [io  0x2000-0x207f]
[    0.081094] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[    0.081137] pci 0000:00:1f.6: System wakeup disabled by ACPI
[    0.081264] pci 0000:01:00.0: [1002:4c57] type 00 class 0x030000
[    0.081280] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xe7ffffff pref]
[    0.081289] pci 0000:01:00.0: reg 0x14: [io  0x3000-0x30ff]
[    0.081298] pci 0000:01:00.0: reg 0x18: [mem 0xc0100000-0xc010ffff]
[    0.081321] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    0.081351] pci 0000:01:00.0: supports D1 D2
[    0.081443] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.081449] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.081453] pci 0000:00:01.0:   bridge window [mem 0xc0100000-0xc01fffff]
[    0.081458] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe7ffffff pref]
[    0.081564] acpiphp: Slot [1-1] registered
[    0.081581] pci 0000:02:00.0: [104c:ac46] type 02 class 0x060700
[    0.081599] pci 0000:02:00.0: reg 0x10: [mem 0xb0000000-0xb0000fff]
[    0.081628] pci 0000:02:00.0: supports D1 D2
[    0.081632] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.081726] pci 0000:02:00.1: [104c:ac46] type 02 class 0x060700
[    0.081744] pci 0000:02:00.1: reg 0x10: [mem 0xb1000000-0xb1000fff]
[    0.081773] pci 0000:02:00.1: supports D1 D2
[    0.081777] pci 0000:02:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.081876] pci 0000:02:01.0: [8086:101e] type 00 class 0x020000
[    0.081894] pci 0000:02:01.0: reg 0x10: [mem 0xc0220000-0xc023ffff]
[    0.081905] pci 0000:02:01.0: reg 0x14: [mem 0xc0200000-0xc020ffff]
[    0.081916] pci 0000:02:01.0: reg 0x18: [io  0x8000-0x803f]
[    0.081948] pci 0000:02:01.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    0.081977] pci 0000:02:01.0: PME# supported from D0 D3hot D3cold
[    0.082087] pci 0000:00:1e.0: PCI bridge to [bus 02-08] (subtractive decode)
[    0.082093] pci 0000:00:1e.0:   bridge window [io  0x4000-0x8fff]
[    0.082099] pci 0000:00:1e.0:   bridge window [mem 0xc0200000-0xcfffffff]
[    0.082105] pci 0000:00:1e.0:   bridge window [mem 0xe8000000-0xefffffff pref]
[    0.082109] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.082113] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[    0.082179] pci_bus 0000:03: busn_res: can not insert [bus 03-ff] under [bus 02-08] (conflicts with (null) [bus 02-08])
[    0.082186] pci_bus 0000:03: busn_res: [bus 03-ff] end is updated to 06
[    0.082243] pci_bus 0000:07: busn_res: can not insert [bus 07-ff] under [bus 02-08] (conflicts with (null) [bus 02-08])
[    0.082248] pci_bus 0000:07: busn_res: [bus 07-ff] end is updated to 07
[    0.082263] pci_bus 0000:00: on NUMA node 0
[    0.082605] ACPI : EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[    0.082605] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.082605] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.082605] vgaarb: loaded
[    0.082605] vgaarb: bridge control possible 0000:01:00.0
[    0.082605] PCI: Using ACPI for IRQ routing
[    0.082605] PCI: pci_cache_line_size set to 64 bytes
[    0.082605] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.082605] e820: reserve RAM buffer [mem 0x2ff60000-0x2fffffff]
[    0.084022] Switched to clocksource pit
[    0.092105] pnp: PnP ACPI init
[    0.092143] ACPI: bus type PNP registered
[    0.092910] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.092917] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[    0.092922] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[    0.092926] system 00:00: [mem 0x000c8000-0x000cbfff] could not be reserved
[    0.092930] system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved
[    0.092935] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved
[    0.092939] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[    0.092943] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[    0.092947] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[    0.092951] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[    0.092955] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[    0.092960] system 00:00: [mem 0x00100000-0x2fffffff] could not be reserved
[    0.092965] system 00:00: [mem 0xfec00000-0xffffffff] could not be reserved
[    0.092972] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.093191] system 00:01: [io  0x1000-0x107f] could not be reserved
[    0.093196] system 00:01: [io  0x1180-0x11bf] has been reserved
[    0.093200] system 00:01: [io  0x15e0-0x15ef] has been reserved
[    0.093204] system 00:01: [io  0x1600-0x162f] has been reserved
[    0.093208] system 00:01: [io  0x1632-0x167f] has been reserved
[    0.093212] system 00:01: [io  0x1630-0x1631] has been reserved
[    0.093217] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.093278] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.093326] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.093373] pnp 00:04: Plug and Play ACPI device, IDs IBM0057 PNP0f13 (active)
[    0.093513] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (disabled)
[    0.093631] pnp 00:06: Plug and Play ACPI device, IDs PNP0400 (disabled)
[    0.094294] pnp: PnP ACPI: found 7 devices
[    0.094297] ACPI: bus type PNP unregistered
[    0.094307] PnPBIOS: Disabled by ACPI PNP
[    0.131541] Switched to clocksource acpi_pm
[    0.131582] pci 0000:00:1f.0: BAR 13: [io  0x1000-0x107f] has bogus alignment
[    0.131596] pci 0000:00:1f.1: BAR 5: assigned [mem 0x30000000-0x300003ff]
[    0.131607] pci 0000:01:00.0: BAR 6: assigned [mem 0xc0120000-0xc013ffff pref]
[    0.131611] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.131616] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.131621] pci 0000:00:01.0:   bridge window [mem 0xc0100000-0xc01fffff]
[    0.131626] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe7ffffff pref]
[    0.131638] pci 0000:02:00.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[    0.131643] pci 0000:02:00.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[    0.131647] pci 0000:02:00.1: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[    0.131651] pci 0000:02:00.1: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[    0.131655] pci 0000:02:00.0: res[13]=[io  0x0100-0x00ff] get_res_add_size add_size 100
[    0.131659] pci 0000:02:00.0: res[14]=[io  0x0100-0x00ff] get_res_add_size add_size 100
[    0.131663] pci 0000:02:00.1: res[13]=[io  0x0100-0x00ff] get_res_add_size add_size 100
[    0.131667] pci 0000:02:00.1: res[14]=[io  0x0100-0x00ff] get_res_add_size add_size 100
[    0.131671] pci 0000:02:00.0: BAR 15: assigned [mem 0xe8000000-0xebffffff pref]
[    0.131676] pci 0000:02:00.0: BAR 16: assigned [mem 0xc4000000-0xc7ffffff]
[    0.131680] pci 0000:02:00.1: BAR 15: assigned [mem 0xec000000-0xefffffff pref]
[    0.131684] pci 0000:02:00.1: BAR 16: assigned [mem 0xc8000000-0xcbffffff]
[    0.131689] pci 0000:02:01.0: BAR 6: assigned [mem 0xc0210000-0xc021ffff pref]
[    0.131693] pci 0000:02:00.0: BAR 13: assigned [io  0x4000-0x40ff]
[    0.131697] pci 0000:02:00.0: BAR 14: assigned [io  0x4400-0x44ff]
[    0.131701] pci 0000:02:00.1: BAR 13: assigned [io  0x4800-0x48ff]
[    0.131704] pci 0000:02:00.1: BAR 14: assigned [io  0x4c00-0x4cff]
[    0.131709] pci 0000:02:00.0: CardBus bridge to [bus 03-06]
[    0.131713] pci 0000:02:00.0:   bridge window [io  0x4000-0x40ff]
[    0.131719] pci 0000:02:00.0:   bridge window [io  0x4400-0x44ff]
[    0.131724] pci 0000:02:00.0:   bridge window [mem 0xe8000000-0xebffffff pref]
[    0.131730] pci 0000:02:00.0:   bridge window [mem 0xc4000000-0xc7ffffff]
[    0.131735] pci 0000:02:00.1: CardBus bridge to [bus 07]
[    0.131739] pci 0000:02:00.1:   bridge window [io  0x4800-0x48ff]
[    0.131744] pci 0000:02:00.1:   bridge window [io  0x4c00-0x4cff]
[    0.131750] pci 0000:02:00.1:   bridge window [mem 0xec000000-0xefffffff pref]
[    0.131756] pci 0000:02:00.1:   bridge window [mem 0xc8000000-0xcbffffff]
[    0.131761] pci 0000:00:1e.0: PCI bridge to [bus 02-08]
[    0.131766] pci 0000:00:1e.0:   bridge window [io  0x4000-0x8fff]
[    0.131773] pci 0000:00:1e.0:   bridge window [mem 0xc0200000-0xcfffffff]
[    0.131778] pci 0000:00:1e.0:   bridge window [mem 0xe8000000-0xefffffff pref]
[    0.131787] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.131791] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[    0.131794] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.131798] pci_bus 0000:01: resource 1 [mem 0xc0100000-0xc01fffff]
[    0.131802] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xe7ffffff pref]
[    0.131806] pci_bus 0000:02: resource 0 [io  0x4000-0x8fff]
[    0.131810] pci_bus 0000:02: resource 1 [mem 0xc0200000-0xcfffffff]
[    0.131813] pci_bus 0000:02: resource 2 [mem 0xe8000000-0xefffffff pref]
[    0.131817] pci_bus 0000:02: resource 4 [io  0x0000-0xffff]
[    0.131821] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
[    0.131824] pci_bus 0000:03: resource 0 [io  0x4000-0x40ff]
[    0.131828] pci_bus 0000:03: resource 1 [io  0x4400-0x44ff]
[    0.131832] pci_bus 0000:03: resource 2 [mem 0xe8000000-0xebffffff pref]
[    0.131835] pci_bus 0000:03: resource 3 [mem 0xc4000000-0xc7ffffff]
[    0.131840] pci_bus 0000:07: resource 0 [io  0x4800-0x48ff]
[    0.131843] pci_bus 0000:07: resource 1 [io  0x4c00-0x4cff]
[    0.131847] pci_bus 0000:07: resource 2 [mem 0xec000000-0xefffffff pref]
[    0.131851] pci_bus 0000:07: resource 3 [mem 0xc8000000-0xcbffffff]
[    0.131891] NET: Registered protocol family 2
[    0.132343] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.132381] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[    0.132421] TCP: Hash tables configured (established 8192 bind 8192)
[    0.132482] TCP: reno registered
[    0.132486] UDP hash table entries: 512 (order: 1, 8192 bytes)
[    0.132500] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
[    0.132575] NET: Registered protocol family 1
[    0.132862] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[    0.132866] PCI: setting IRQ 11 as level-triggered
[    0.133105] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[    0.133334] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[    0.133565] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
[    0.133632] pci 0000:01:00.0: Video device with shadowed ROM
[    0.133647] PCI: CLS 32 bytes, default 64
[    0.133728] Unpacking initramfs...
[    0.639134] Freeing initrd memory: 14292K (ee316000 - ef10b000)
[    0.639316] Simple Boot Flag at 0x35 set to 0x1
[    0.639453] microcode: CPU0 sig=0x6d6, pf=0x20, revision=0x18
[    0.639576] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.640090] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.640128] audit: initializing netlink subsys (disabled)
[    0.640166] audit: type=2000 audit(1418645697.639:1): initialized
[    0.640630] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.640654] zbud: loaded
[    0.640735] VFS: Disk quotas dquot_6.5.2
[    0.640757] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.640844] msgmni has been set to 1506
[    0.641324] alg: No test for stdrng (krng)
[    0.641358] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.641417] io scheduler noop registered
[    0.641422] io scheduler deadline registered
[    0.641469] io scheduler cfq registered (default)
[    0.641657] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.641686] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.641813] GHES: HEST is not enabled!
[    0.641839] isapnp: Scanning for PnP cards...
[    0.994631] isapnp: No Plug & Play device found
[    0.994714] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.994827] serial 00:05: [io  0x03f8-0x03ff]
[    0.994866] serial 00:05: [irq 4]
[    0.995253] serial 00:05: activated
[    0.995321] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 921600) is a NS16550A
[    0.995948] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
[    0.995952] PCI: setting IRQ 5 as level-triggered
[    0.996113] Linux agpgart interface v0.103
[    0.996242] agpgart-intel 0000:00:00.0: Intel 855PM Chipset
[    1.010398] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    1.010623] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    1.016625] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.016633] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.016816] mousedev: PS/2 mouse device common for all mice
[    1.016881] rtc_cmos 00:02: RTC can wake from S4
[    1.017016] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.017035] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram
[    1.017093] platform eisa.0: Probing EISA bus 0
[    1.017101] platform eisa.0: Cannot allocate resource for EISA slot 1
[    1.017106] platform eisa.0: Cannot allocate resource for EISA slot 2
[    1.017110] platform eisa.0: Cannot allocate resource for EISA slot 3
[    1.017114] platform eisa.0: Cannot allocate resource for EISA slot 4
[    1.017117] platform eisa.0: Cannot allocate resource for EISA slot 5
[    1.017121] platform eisa.0: Cannot allocate resource for EISA slot 6
[    1.017125] platform eisa.0: Cannot allocate resource for EISA slot 7
[    1.017128] platform eisa.0: Cannot allocate resource for EISA slot 8
[    1.017132] platform eisa.0: EISA: Detected 0 cards
[    1.017139] ledtrig-cpu: registered to indicate activity on CPUs
[    1.017929] TCP: cubic registered
[    1.017948] NET: Registered protocol family 10
[    1.018249] mip6: Mobile IPv6
[    1.018254] NET: Registered protocol family 17
[    1.018261] mpls_gso: MPLS GSO support
[    1.018313] Using IPI Shortcut mode
[    1.018492] registered taskstats version 1
[    1.018863] rtc_cmos 00:02: setting system clock to 2014-12-15 12:14:58 UTC (1418645698)
[    1.018930] PM: Hibernation image not present or could not be loaded.
[    1.019290] Freeing unused kernel memory: 668K (c15ff000 - c16a6000)
[    1.019303] Write protecting the kernel text: 4244k
[    1.019335] Write protecting the kernel read-only data: 1388k
[    1.021285] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.036174] systemd-udevd[49]: starting version 215
[    1.036596] random: systemd-udevd urandom read with 6 bits of entropy available
[    1.058361] thermal LNXTHERM:00: registered as thermal_zone0
[    1.058369] ACPI: Thermal Zone [THM0] (30 C)
[    1.073153] ACPI: bus type USB registered
[    1.073203] usbcore: registered new interface driver usbfs
[    1.073222] usbcore: registered new interface driver hub
[    1.080623] SCSI subsystem initialized
[    1.084717] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    1.084723] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    1.084944] usbcore: registered new device driver usb
[    1.085703] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.086126] uhci_hcd: USB Universal Host Controller Interface driver
[    1.086211] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.086222] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    1.086233] uhci_hcd 0000:00:1d.0: detected 2 ports
[    1.086259] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800
[    1.086735] ehci-pci: EHCI PCI platform driver
[    1.086791] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    1.086795] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.086799] usb usb1: Product: UHCI Host Controller
[    1.086803] usb usb1: Manufacturer: Linux 3.16.0-4-586 uhci_hcd
[    1.086806] usb usb1: SerialNumber: 0000:00:1d.0
[    1.087183] hub 1-0:1.0: USB hub found
[    1.087194] hub 1-0:1.0: 2 ports detected
[    1.087539] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    1.087549] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    1.087565] ehci-pci 0000:00:1d.7: debug port 1
[    1.091476] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[    1.091484] ehci-pci 0000:00:1d.7: irq 11, io mem 0xc0000000
[    1.100040] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.100108] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.100112] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.100116] usb usb2: Product: EHCI Host Controller
[    1.100120] usb usb2: Manufacturer: Linux 3.16.0-4-586 ehci_hcd
[    1.100123] usb usb2: SerialNumber: 0000:00:1d.7
[    1.100332] hub 2-0:1.0: USB hub found
[    1.100342] hub 2-0:1.0: 6 ports detected
[    1.101304] libata version 3.00 loaded.
[    1.351598] hub 1-0:1.0: USB hub found
[    1.351611] hub 1-0:1.0: 2 ports detected
[    1.351824] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.351834] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.351841] uhci_hcd 0000:00:1d.1: detected 2 ports
[    1.351864] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
[    1.351946] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.351950] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.351953] usb usb3: Product: UHCI Host Controller
[    1.351957] usb usb3: Manufacturer: Linux 3.16.0-4-586 uhci_hcd
[    1.351960] usb usb3: SerialNumber: 0000:00:1d.1
[    1.352220] hub 3-0:1.0: USB hub found
[    1.352273] hub 3-0:1.0: 2 ports detected
[    1.352458] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.352467] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.352474] uhci_hcd 0000:00:1d.2: detected 2 ports
[    1.352493] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840
[    1.352568] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.352572] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.352575] usb usb4: Product: UHCI Host Controller
[    1.352579] usb usb4: Manufacturer: Linux 3.16.0-4-586 uhci_hcd
[    1.352582] usb usb4: SerialNumber: 0000:00:1d.2
[    1.352804] hub 4-0:1.0: USB hub found
[    1.352856] hub 4-0:1.0: 2 ports detected
[    1.353341] ata_piix 0000:00:1f.1: version 2.13
[    1.353352] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[    1.357604] scsi0 : ata_piix
[    1.357803] scsi1 : ata_piix
[    1.357886] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1860 irq 14
[    1.357889] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1868 irq 15
[    1.385219] e1000 0000:02:01.0 eth0: (PCI:33MHz:32-bit) 00:11:25:14:1b:d5
[    1.385227] e1000 0000:02:01.0 eth0: Intel(R) PRO/1000 Network Connection
[    1.520310] ata2.00: ATAPI: HL-DT-STCD-RW/DVD DRIVE GCC-4242N, 0201, max UDMA/33
[    1.521016] ata1.00: ATA-6: HTS541040G9AT00, MB2IA5BJ, max UDMA/100
[    1.521020] ata1.00: 78140160 sectors, multi 16: LBA 
[    1.536180] ata2.00: configured for UDMA/33
[    1.536688] ata1.00: configured for UDMA/100
[    1.536824] scsi 0:0:0:0: Direct-Access     ATA      HTS541040G9AT00  A5BJ PQ: 0 ANSI: 5
[    1.542518] scsi 1:0:0:0: CD-ROM            HL-DT-ST RW/DVD GCC-4242N 0201 PQ: 0 ANSI: 5
[    1.555809] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
[    1.555882] sd 0:0:0:0: [sda] Write Protect is off
[    1.555886] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.555917] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.564813] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[    1.564817] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.565059] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.566316] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.566408] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.603585]  sda: sda1 sda2 < sda5 >
[    1.604226] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.688040] tsc: Refined TSC clocksource calibration: 1698.557 MHz
[    2.688081] Switched to clocksource tsc
[    4.080044] floppy0: no floppy controllers found
[    4.080056] work still pending
[    4.096675] PM: Starting manual resume from disk
[    4.096684] PM: Hibernation image partition 8:5 present
[    4.096687] PM: Looking for hibernation image.
[    4.096879] PM: Image not found (code -22)
[    4.096882] PM: Hibernation image not present or could not be loaded.
[    4.154548] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    5.531677] random: nonblocking pool is initialized
[    8.253844] lp: driver loaded but no devices found
[    8.563683] ppdev: user-space parallel port driver
[    8.603758] parport_pc 00:06: [io  0x03bc-0x03be]
[    8.603799] parport_pc 00:06: [irq 7]
[    8.604248] parport_pc 00:06: activated
[    8.604253] parport_pc 00:06: reported by Plug and Play ACPI
[    8.604292] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
[    8.700165] lp0: using parport0 (interrupt-driven).
[    8.837118] fuse init (API version 7.23)
[    9.077475] Disabling lock debugging due to kernel taint
[    9.078546] ndiswrapper version 1.59 loaded (smp=no, preempt=no)
[    9.362578] usbcore: registered new interface driver ndiswrapper
[   13.471740] systemd-udevd[172]: starting version 215
[   15.086151] tsc: Marking TSC unstable due to TSC halts in idle
[   15.086164] ACPI: acpi_idle registered with cpuidle
[   15.089718] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[   15.089841] Switched to clocksource acpi_pm
[   15.089859] ACPI: Lid Switch [LID]
[   15.089943] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[   15.089949] ACPI: Sleep Button [SLPB]
[   15.090059] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[   15.090064] ACPI: Power Button [PWRF]
[   15.107036] NET: Registered protocol family 23
[   15.184839] nsc-ircc, Found chip at base=0x02e
[   15.184847] nsc-ircc, Wrong chip version ff
[   15.215027] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   15.225742] Non-volatile memory driver v1.3
[   15.269291] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[   15.269296] thinkpad_acpi: http://ibm-acpi.sf.net/
[   15.269298] thinkpad_acpi: ThinkPad BIOS 1RETDRWW (3.23 ), EC 1RHT71WW-3.04
[   15.269301] thinkpad_acpi: IBM ThinkPad T42, model 23744WG
[   15.271897] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[   15.280972] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[   15.281190] ACPI: AC Adapter [AC] (on-line)
[   15.295536] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5
[   15.297411] ACPI: Battery Slot [BAT0] (battery present)
[   15.301132] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[   15.301264] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:02/LNXVIDEO:00/input/input6
[   15.467749] [drm] Initialized drm 1.1.0 20060810
[   15.492770] yenta_cardbus 0000:02:00.0: CardBus bridge found [1014:0552]
[   15.492791] yenta_cardbus 0000:02:00.0: Using INTVAL to route CSC interrupts to PCI
[   15.492795] yenta_cardbus 0000:02:00.0: Routing CardBus interrupts to PCI
[   15.492801] yenta_cardbus 0000:02:00.0: TI: mfunc 0x01d21b22, devctl 0x64
[   15.569751] intel_rng: FWH not detected
[   15.642057] [drm] radeon kernel modesetting enabled.
[   15.648278] [drm] initializing kernel modesetting (RV200 0x1002:0x4C57 0x1014:0x0530).
[   15.648305] [drm] register mmio base: 0xC0100000
[   15.648309] [drm] register mmio size: 65536
[   15.648509] agpgart-intel 0000:00:00.0: AGP 2.0 bridge
[   15.648526] agpgart-intel 0000:00:00.0: putting AGP V2 device into 1x mode
[   15.648567] radeon 0000:01:00.0: putting AGP V2 device into 1x mode
[   15.648590] radeon 0000:01:00.0: GTT: 256M 0xD0000000 - 0xDFFFFFFF
[   15.648604] radeon 0000:01:00.0: VRAM: 128M 0x00000000E0000000 - 0x00000000E7FFFFFF (32M used)
[   15.649187] [drm] Detected VRAM RAM=128M, BAR=128M
[   15.649195] [drm] RAM width 64bits DDR
[   15.654225] [TTM] Zone  kernel: Available graphics memory: 385870 kiB
[   15.654231] [TTM] Initializing pool allocator
[   15.654277] [drm] radeon: 32M of VRAM memory ready
[   15.654282] [drm] radeon: 256M of GTT memory ready.
[   15.654329] [drm] radeon: power management initialized
[   15.666317] radeon 0000:01:00.0: WB disabled
[   15.666331] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000d0000000 and cpu addr 0xf0776000
[   15.666337] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   15.666341] [drm] Driver supports precise vblank timestamp query.
[   15.666359] [drm] radeon: irq initialized.
[   15.666376] [drm] Loading R100 Microcode
[   15.701242] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/R100_cp.bin
[   15.701520] [drm] radeon: ring at 0x00000000D0001000
[   15.701549] [drm] ring test succeeded in 1 usecs
[   15.701760] [drm] ib test succeeded in 0 usecs
[   15.711979] [drm] Panel ID String: 1024x768                
[   15.711987] [drm] Panel Size 1024x768
[   15.712110] [drm] No TV DAC info found in BIOS
[   15.732133] [drm] radeon legacy LVDS backlight initialized
[   15.732139] [drm] Radeon Display Connectors
[   15.732142] [drm] Connector 0:
[   15.732146] [drm]   VGA-1
[   15.732151] [drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[   15.732154] [drm]   Encoders:
[   15.732158] [drm]     CRT1: INTERNAL_DAC1
[   15.732162] [drm] Connector 1:
[   15.732165] [drm]   DVI-D-1
[   15.732168] [drm]   HPD1
[   15.732173] [drm]   DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[   15.732176] [drm]   Encoders:
[   15.732179] [drm]     DFP1: INTERNAL_TMDS1
[   15.732183] [drm] Connector 2:
[   15.732186] [drm]   LVDS-1
[   15.732189] [drm]   Encoders:
[   15.732192] [drm]     LCD1: INTERNAL_LVDS
[   15.732195] [drm] Connector 3:
[   15.732198] [drm]   SVIDEO-1
[   15.732201] [drm]   Encoders:
[   15.732204] [drm]     TV1: INTERNAL_DAC2
[   15.735596] yenta_cardbus 0000:02:00.0: ISA IRQ mask 0x0418, PCI irq 11
[   15.735604] yenta_cardbus 0000:02:00.0: Socket status: 30000086
[   15.735615] yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge window: [io  0x4000-0x8fff]
[   15.735623] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x4000-0x8fff:
[   15.736447]  excluding 0x4000-0x40ff 0x4400-0x44ff 0x4800-0x48ff 0x4c00-0x4cff 0x8000-0x803f
[   15.820450] yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge window: [mem 0xc0200000-0xcfffffff]
[   15.820460] pcmcia_socket pcmcia_socket0: cs: memory probe 0xc0200000-0xcfffffff:
[   15.820466]  excluding 0xc0200000-0xc09fffff 0xc3a00000-0xcc1fffff 0xcfa00000-0xd01fffff
[   15.820506] yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge window: [mem 0xe8000000-0xefffffff pref]
[   15.820513] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe8000000-0xefffffff:
[   15.820529]  excluding 0xe8000000-0xefffffff
[   15.823436] yenta_cardbus 0000:02:00.1: CardBus bridge found [1014:0552]
[   15.823459] yenta_cardbus 0000:02:00.1: Using INTVAL to route CSC interrupts to PCI
[   15.823465] yenta_cardbus 0000:02:00.1: Routing CardBus interrupts to PCI
[   15.823474] yenta_cardbus 0000:02:00.1: TI: mfunc 0x01d21b22, devctl 0x64
[   15.844044] [drm] fb mappable at 0xE0040000
[   15.844052] [drm] vram apper at 0xE0000000
[   15.844056] [drm] size 786432
[   15.844059] [drm] fb depth is 8
[   15.844062] [drm]    pitch is 1024
[   15.844231] fbcon: radeondrmfb (fb0) is primary device
[   15.889626] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   15.900703] Console: switching to colour frame buffer device 128x48
[   15.905525] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[   15.905531] radeon 0000:01:00.0: registered panic notifier
[   15.933714] [drm] Initialized radeon 2.39.0 20080528 for 0000:01:00.0 on minor 0
[   16.052383] yenta_cardbus 0000:02:00.1: ISA IRQ mask 0x0418, PCI irq 5
[   16.052393] yenta_cardbus 0000:02:00.1: Socket status: 30000020
[   16.052405] yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge window: [io  0x4000-0x8fff]
[   16.052413] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x4000-0x8fff:
[   16.053213]  excluding 0x4000-0x40ff 0x4400-0x44ff 0x4800-0x48ff 0x4c00-0x4cff 0x8000-0x803f
[   16.094810] yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge window: [mem 0xc0200000-0xcfffffff]
[   16.094817] pcmcia_socket pcmcia_socket1: cs: memory probe 0xc0200000-0xcfffffff:
[   16.094822]  excluding 0xc0200000-0xc09fffff 0xc3a00000-0xcc1fffff 0xcfa00000-0xd01fffff
[   16.094846] yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge window: [mem 0xe8000000-0xefffffff pref]
[   16.094850] pcmcia_socket pcmcia_socket1: cs: memory probe 0xe8000000-0xefffffff:
[   16.094860]  excluding 0xe8000000-0xefffffff
[   16.512677] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
[   16.513259]  excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377
[   16.513689] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
[   16.513902]  excluding 0x3f0-0x3ff 0x4d0-0x4d7
[   16.514107] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
[   16.514441]  clean.
[   16.514459] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
[   16.514828]  clean.
[   16.514849] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[   16.514855]  excluding 0xc0000-0xcffff 0xdc000-0xfffff
[   16.514881] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[   16.514897]  clean.
[   16.514914] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[   16.514929]  clean.
[   16.514946] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
[   16.515327]  clean.
[   16.575297] systemd-journald[122]: Received request to flush runtime journal from PID 1
[   16.744053] snd_intel8x0 0000:00:1f.5: intel8x0_measure_ac97_clock: measured 54895 usecs (2645 samples)
[   16.744066] snd_intel8x0 0000:00:1f.5: clocking to 48000
[   16.852090] snd_intel8x0m 0000:00:1f.6: MC'97 1 converters and GPIO not ready (0xff00)
[   16.930073] psmouse serio1: synaptics: Touchpad model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0/0x0, board id: 71, fw id: 4797594
[   16.930092] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[   16.970360] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[   16.988051] pcmcia_socket pcmcia_socket1: pccard: CardBus card inserted into slot 1
[   16.988088] pci 0000:07:00.0: [11ab:1faa] type 00 class 0x020000
[   16.988123] pci 0000:07:00.0: reg 0x10: [mem 0xd0000000-0xd000ffff]
[   16.988140] pci 0000:07:00.0: reg 0x14: [mem 0xc0000000-0xc000ffff]
[   16.988407] pci 0000:07:00.0: BAR 0: assigned [mem 0xc8000000-0xc800ffff]
[   16.988421] pci 0000:07:00.0: BAR 1: assigned [mem 0xc8010000-0xc801ffff]
[   17.068070] iTCO_vendor_support: vendor-support=0
[   18.336089] floppy0: no floppy controllers found
[   18.336109] work still pending
[   20.716911] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   20.716996] iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x1060)
[   20.718016] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   20.795962] ndiswrapper: driver mrv8335a (Marvell,02/22/2005,3.1.1.7) loaded
[   20.796680] ndiswrapper 0000:07:00.0: enabling device (0000 -> 0002)
[   20.798060] ndiswrapper: using IRQ 5
[   21.060743] wlan0: ethernet device 08:10:74:17:a6:70 using NDIS driver: mrv8335a, version: 0x3000036, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 11AB:1FAA.5.conf
[   21.060776] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2-PSK; AES/CCMP with WPA, WPA2, WPA2-PSK
[   21.061164] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af:
[   21.061862]  excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377
[   21.062453] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff:
[   21.062715]  excluding 0x3f0-0x3ff 0x4d0-0x4d7
[   21.062999] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff:
[   21.063409]  clean.
[   21.063456] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7:
[   21.063908]  clean.
[   21.063963] pcmcia_socket pcmcia_socket1: cs: memory probe 0x0c0000-0x0fffff:
[   21.063980]  excluding 0xc0000-0xcffff 0xdc000-0xfffff
[   21.067271] pcmcia_socket pcmcia_socket1: cs: memory probe 0xa0000000-0xa0ffffff:
[   21.067315]  clean.
[   21.067363] pcmcia_socket pcmcia_socket1: cs: memory probe 0x60000000-0x60ffffff:
[   21.067404]  clean.
[   21.067453] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff:
[   21.067920]  clean.
[   21.189314] Adding 1569788k swap on /dev/sda5.  Priority:-1 extents:1 across:1569788k FS
[   21.661253] cfg80211: Calling CRDA to update world regulatory domain
[   21.687003] cfg80211: World regulatory domain updated:
[   21.687010] cfg80211:  DFS Master region: unset
[   21.687014] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   21.687018] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   21.687022] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   21.687025] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   21.687029] cfg80211:   (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
[   21.687032] cfg80211:   (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   21.687036] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   21.687039] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   21.687043] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   23.788687] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   57.564136] usb 2-3: new high-speed USB device number 2 using ehci-pci
[   57.696870] usb 2-3: New USB device found, idVendor=0781, idProduct=5567
[   57.696876] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   57.696882] usb 2-3: Product: Cruzer Blade
[   57.696887] usb 2-3: Manufacturer: SanDisk
[   57.696891] usb 2-3: SerialNumber: 20060165010C74509C63
[   57.805978] usb-storage 2-3:1.0: USB Mass Storage device detected
[   57.812115] scsi2 : usb-storage 2-3:1.0
[   57.812317] usbcore: registered new interface driver usb-storage
[   58.813865] scsi 2:0:0:0: Direct-Access     SanDisk  Cruzer Blade     2.01 PQ: 0 ANSI: 6
[   58.816920] sd 2:0:0:0: Attached scsi generic sg2 type 0
[   58.818188] sd 2:0:0:0: [sdb] 31266816 512-byte logical blocks: (16.0 GB/14.9 GiB)
[   58.819678] sd 2:0:0:0: [sdb] Write Protect is off
[   58.819691] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
[   58.824752] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[   58.835007]  sdb: sdb1 sdb2
[   58.839313] sd 2:0:0:0: [sdb] Attached SCSI disk
[   63.352852]  sdb: sdb1 sdb2
[   63.357961]  sdb: sdb1 sdb2
[   68.166193]  sdb: sdb1 sdb2
[   87.825073]  sdb: sdb1 sdb2
[   91.602181]  sdb:
[   91.768340]  sdb:
[   92.199783]  sdb:
[   92.401910]  sdb:
[  114.641429]  sdb:
[  114.874448]  sdb: sdb1
[  115.266046]  sdb: sdb1
[  115.577573]  sdb: sdb1
[  125.546994] usb 2-3: USB disconnect, device number 2
[ 1368.556422] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 1368.556602] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 1562.364162] usb 2-3: new high-speed USB device number 3 using ehci-pci
[ 1562.496994] usb 2-3: New USB device found, idVendor=0781, idProduct=5567
[ 1562.497007] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1562.497017] usb 2-3: Product: Cruzer Blade
[ 1562.497026] usb 2-3: Manufacturer: SanDisk
[ 1562.497035] usb 2-3: SerialNumber: 20060165010C74509C63
[ 1562.533595] usb-storage 2-3:1.0: USB Mass Storage device detected
[ 1562.535990] scsi3 : usb-storage 2-3:1.0
[ 1563.537848] scsi 3:0:0:0: Direct-Access     SanDisk  Cruzer Blade     2.01 PQ: 0 ANSI: 6
[ 1563.540920] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 1563.542293] sd 3:0:0:0: [sdb] 31266816 512-byte logical blocks: (16.0 GB/14.9 GiB)
[ 1563.543913] sd 3:0:0:0: [sdb] Write Protect is off
[ 1563.543927] sd 3:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 1563.545290] sd 3:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 1563.556227]  sdb: sdb1
[ 1563.559791] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 1570.428360] FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
00:00.0 Host bridge [0600]: Intel Corporation 82855PM Processor to I/O Controller [8086:3340] (rev 03)
00:01.0 PCI bridge [0604]: Intel Corporation 82855PM Processor to AGP Controller [8086:3341] (rev 03)
00:1d.0 USB controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [8086:24c2] (rev 01)
00:1d.1 USB controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [8086:24c4] (rev 01)
00:1d.2 USB controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 [8086:24c7] (rev 01)
00:1d.7 USB controller [0c03]: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller [8086:24cd] (rev 01)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 81)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge [8086:24cc] (rev 01)
00:1f.1 IDE interface [0101]: Intel Corporation 82801DBM (ICH4-M) IDE Controller [8086:24ca] (rev 01)
00:1f.3 SMBus [0c05]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller [8086:24c3] (rev 01)
00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller [8086:24c5] (rev 01)
00:1f.6 Modem [0703]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller [8086:24c6] (rev 01)
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RV200/M7 [Mobility Radeon 7500] [1002:4c57]
02:00.0 CardBus bridge [0607]: Texas Instruments PCI4520 PC card Cardbus Controller [104c:ac46] (rev 01)
02:00.1 CardBus bridge [0607]: Texas Instruments PCI4520 PC card Cardbus Controller [104c:ac46] (rev 01)
02:01.0 Ethernet controller [0200]: Intel Corporation 82540EP Gigabit Ethernet Controller (Mobile) [8086:101e] (rev 03)
07:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88w8335 [Libertas] 802.11b/g Wireless [11ab:1faa] (rev 03)
00:00.0 Host bridge: Intel Corporation 82855PM Processor to I/O Controller (rev 03)
	Subsystem: IBM Thinkpad T40 series
	Flags: bus master, fast devsel, latency 0
	Memory at d0000000 (32-bit, prefetchable) [size=256M]
	Capabilities: [e4] Vendor Specific Information: Len=04 <?>
	Capabilities: [a0] AGP version 2.0
	Kernel driver in use: agpgart-intel

00:01.0 PCI bridge: Intel Corporation 82855PM Processor to AGP Controller (rev 03) (prog-if 00 [Normal decode])
	Flags: bus master, 66MHz, fast devsel, latency 96
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
	I/O behind bridge: 00003000-00003fff
	Memory behind bridge: c0100000-c01fffff
	Prefetchable memory behind bridge: e0000000-e7ffffff

00:1d.0 USB controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01) (prog-if 00 [UHCI])
	Subsystem: IBM ThinkPad
	Flags: bus master, medium devsel, latency 0, IRQ 11
	I/O ports at 1800 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.1 USB controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01) (prog-if 00 [UHCI])
	Subsystem: IBM ThinkPad
	Flags: bus master, medium devsel, latency 0, IRQ 11
	I/O ports at 1820 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.2 USB controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01) (prog-if 00 [UHCI])
	Subsystem: IBM ThinkPad
	Flags: bus master, medium devsel, latency 0, IRQ 11
	I/O ports at 1840 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.7 USB controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI])
	Subsystem: IBM ThinkPad
	Flags: bus master, medium devsel, latency 0, IRQ 11
	Memory at c0000000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: [50] Power Management version 2
	Capabilities: [58] Debug port: BAR=1 offset=0080
	Kernel driver in use: ehci-pci

00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 81) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=02, subordinate=08, sec-latency=64
	I/O behind bridge: 00004000-00008fff
	Memory behind bridge: c0200000-cfffffff
	Prefetchable memory behind bridge: e8000000-efffffff

00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 01)
	Flags: bus master, medium devsel, latency 0
	Kernel driver in use: lpc_ich

00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 01) (prog-if 8a [Master SecP PriP])
	Subsystem: IBM ThinkPad
	Flags: bus master, medium devsel, latency 0, IRQ 11
	I/O ports at 01f0 [size=8]
	I/O ports at 03f4
	I/O ports at 0170 [size=8]
	I/O ports at 0374
	I/O ports at 1860 [size=16]
	Memory at 30000000 (32-bit, non-prefetchable) [size=1K]
	Kernel driver in use: ata_piix

00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 01)
	Subsystem: IBM ThinkPad
	Flags: medium devsel, IRQ 5
	I/O ports at 1880 [size=32]
	Kernel driver in use: i801_smbus

00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01)
	Subsystem: IBM ThinkPad T4x Series
	Flags: bus master, medium devsel, latency 0, IRQ 5
	I/O ports at 1c00 [size=256]
	I/O ports at 18c0 [size=64]
	Memory at c0000c00 (32-bit, non-prefetchable) [size=512]
	Memory at c0000800 (32-bit, non-prefetchable) [size=256]
	Capabilities: [50] Power Management version 2
	Kernel driver in use: snd_intel8x0

00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 01) (prog-if 00 [Generic])
	Subsystem: IBM ThinkPad R50e
	Flags: bus master, medium devsel, latency 0, IRQ 5
	I/O ports at 2400 [size=256]
	I/O ports at 2000 [size=128]
	Capabilities: [50] Power Management version 2
	Kernel driver in use: snd_intel8x0m

01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV200/M7 [Mobility Radeon 7500] (prog-if 00 [VGA controller])
	Subsystem: IBM ThinkPad T4x Series
	Flags: bus master, stepping, fast Back2Back, 66MHz, medium devsel, latency 66, IRQ 11
	Memory at e0000000 (32-bit, prefetchable) [size=128M]
	I/O ports at 3000 [size=256]
	Memory at c0100000 (32-bit, non-prefetchable) [size=64K]
	[virtual] Expansion ROM at c0120000 [disabled] [size=128K]
	Capabilities: [58] AGP version 2.0
	Capabilities: [50] Power Management version 2
	Kernel driver in use: radeon

02:00.0 CardBus bridge: Texas Instruments PCI4520 PC card Cardbus Controller (rev 01)
	Subsystem: IBM ThinkPad
	Physical Slot: 1
	Flags: bus master, medium devsel, latency 168, IRQ 11
	Memory at b0000000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
	Memory window 0: e8000000-ebffffff (prefetchable)
	Memory window 1: c4000000-c7ffffff
	I/O window 0: 00004000-000040ff
	I/O window 1: 00004400-000044ff
	16-bit legacy interface ports at 0001
	Capabilities: [a0] Power Management version 2
	Kernel driver in use: yenta_cardbus

02:00.1 CardBus bridge: Texas Instruments PCI4520 PC card Cardbus Controller (rev 01)
	Subsystem: IBM ThinkPad
	Physical Slot: 1
	Flags: bus master, medium devsel, latency 168, IRQ 5
	Memory at b1000000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=02, secondary=07, subordinate=07, sec-latency=176
	Memory window 0: ec000000-efffffff (prefetchable)
	Memory window 1: c8000000-cbffffff
	I/O window 0: 00004800-000048ff
	I/O window 1: 00004c00-00004cff
	16-bit legacy interface ports at 0001
	Capabilities: [a0] Power Management version 2
	Kernel driver in use: yenta_cardbus

02:01.0 Ethernet controller: Intel Corporation 82540EP Gigabit Ethernet Controller (Mobile) (rev 03)
	Subsystem: IBM Thinkpad
	Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 11
	Memory at c0220000 (32-bit, non-prefetchable) [size=128K]
	Memory at c0200000 (32-bit, non-prefetchable) [size=64K]
	I/O ports at 8000 [size=64]
	[virtual] Expansion ROM at c0210000 [disabled] [size=64K]
	Capabilities: [dc] Power Management version 2
	Kernel driver in use: e1000

07:00.0 Ethernet controller: Marvell Technology Group Ltd. 88w8335 [Libertas] 802.11b/g Wireless (rev 03)
	Subsystem: Marvell Technology Group Ltd. 88w8335 [Libertas] 802.11b/g Wireless
	Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 5
	Memory at c8000000 (32-bit, non-prefetchable) [size=64K]
	Memory at c8010000 (32-bit, non-prefetchable) [size=64K]
	Capabilities: [40] Power Management version 2
	Kernel driver in use: ndiswrapper


--- End Message ---
--- Begin Message ---
Hi

This bug was filed for a very old kernel or the bug is old itself
without resolution.

If you can reproduce it with

- the current version in unstable/testing
- the latest kernel from backports

please reopen the bug, see https://www.debian.org/Bugs/server-control
for details.

Regards,
Salvatore

--- End Message ---

Reply to: